Used Wacker Loader for sale (3,889)

Condition: new, maximum load weight: 45,250 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. The following is an excerpt of the equipment. Complete equipment details are available upon request. Codpfx Afsz Dmn Re Aohc Chassis, gooseneck: Special steel frame made of high-strength fine-grained steels, electrically welded at the connection points, well-dimensioned outer frame. 4-axle arrangement. Wheel arches above the axles with spray mist suppression. All steel parts are sandblasted. Lateral impact protection made of anodized aluminum installed. Increased point load of approximately 30,000 kg over approximately 4,000 mm. Special design in the gooseneck area for maximum low-bed length in combination with AluLeg support legs instead of telescopic support winches, maximum rear swivel radius of the tractor unit approximately 2,100 mm. Special superstructure with rear beam widening: DINKEL – special superstructure. Self-supporting aluminum roof beam/profile approximately 120 x 100 mm, sliding cover with plastic flaps. Rear beams can be widened to approximately 4,200 mm (only for loading and unloading). Three sliding beams per side with rubber strap relief. Additional center beam locking mechanisms in the roof beam and parking position, using a pull cable and spring latch. DINKEL – lifting roof mechanically height-adjustable. Lifting roof height approximately 400 mm, operable on both or one side, without opening the opposite side and the doors. Additional height adjustment of approximately 480 mm in approximately 40 mm increments with height adjustment in the beams. Front overhang on the front wall for operation under a tarpaulin up to a total height of approximately 4,400 mm. Four rows of stackable approximately 150 mm aluminum slats on the sides, with 450 mm pockets at the bottom and 4 rows of single pockets above. In the upper bed, only 3 rows of insertable slats. Spacing between slats evenly distributed. Floor: Approximately 27 mm special water-resistant glued beech plywood, rough surface. Steel sheet in the wheel arch area. Forklift drivable according to DIN standard. Outer frame flush with the surface. Brakes: WABCO air brake system with EBS according to EC standard 71/320 EEC including PREV (parking release safety valve). Spring-loaded brake cylinders as parking brake. Wabco Smart Board with odometer and unit load indicator. Includes WABCO tire pressure monitoring system. Axles: 4 x 10,000 kg SAF/Sauer with drum brakes in low-bed design. Air suspension with lifting and lowering device, total lift approximately 230 mm. Third and fourth axles as friction-jointed trailing axles with electrical and mechanical lock. Twin tires: 235/75 R 17.5, -16-ply. Manufacturer of our choice, including E-wheel holder. Without E-wheel. Lighting: according to EC standard including side lights in LED design. Position lights in LED design. 2 additional reversing lights. 2 work lights on the front wall inside, at the top. Painting: Chassis and superstructure in a single color in the RAL color of your choice. Center beams, axles coated with KTL (cathodic electrodeposition) in black. Corner beams in hot-dip galvanized design. Plastic parts in black. Hot-dip galvanized parts unpainted. Rims in factory silver. Special equipment included: - E-supply cable 15-pin - Air suspension in ECAS design, operated on the semi-trailer - Overwidth signage at the front and rear in zinc-plated, continuously telescopic design with attached boundary lights including so

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 636, type of input current: three-phase, total width: 1,800 mm, input voltage: 400 V, input current: 10 A, lifting height: 2,000 mm, load capacity: 250 kg, 31 C – Gerber LS-250-LU Automatic Fabric Loading System – Industrial Spreading Line Unit Description For sale is a Gerber automatic fabric loading system (Model 250 LU), designed for seamless integration into industrial fabric spreading and cutting lines. This unit enables efficient, safe, and controlled handling of heavy fabric rolls, significantly improving workflow and reducing manual labor in high-volume production environments. The system has been operated as part of a complete and synchronized production line together with a GERBER SY 101 spreading system (unit 21 C) and a Lectra Vector VT-FA-MH-71 CNC cutting system (unit 29 C). This setup allows a continuous workflow from roll loading to spreading and cutting, minimizing downtime and maximizing throughput. The machine has been used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Video in working condition taken 5.3.2026. Includes • Gerber automatic fabric loading unit • Motorized lifting and roller feed system • Adjustable frame structure • Integrated control panel and switches • Heavy-duty steel frame with wheels Technical Details • Manufacturer: Gerber Technology • Model: LS-250-LU (Loading Unit) • Year: 2004 • Serial number: 636 • Type: Automatic fabric roll loading system • Lifting capacity: up to 250 kg • Machine weight: approx. 300 kg • Voltage: 3 × 380 V • Frequency: 50 Hz • Current: approx. 10 A System Functionality • Automated lifting and positioning of fabric rolls • Precise alignment with spreading machines • Smooth and controlled feeding into spreading systems • Mobile design allows flexible positioning between lines Production Advantages • Eliminates manual lifting of heavy fabric rolls • Improves operator safety and ergonomics • Reduces downtime during roll changes • Enables continuous, high-efficiency production flow • Ensures consistent material alignment for spreading Integration • Designed for use with Gerber spreading systems (e.g. SY 101) • Fully compatible with automated cutting lines (e.g. Lectra Vector systems) • Suitable for synchronized production environments Condition Used industrial condition Recently serviced on 27.02.2026 Operational prior to factory shutdown Typical signs of industrial use Inspection recommended prior to purchase Sold as-is, where-is, without warranty Typical Applications • Fabric spreading lines • Textile production workflows • Cutting room automation Codey Av H Sspfx Af Aehc • High-volume garment manufacturing Location Valga, Estonia Removal & Transport Buyer responsible for dismantling, loading, and transport Professional handling recommended due to size and weight

Condition: used, axle configuration: > 3 axles, first registration: 01/2023, Year of construction: 2023, Number of axles: 8 Axle type: Swinging axles Steering: Hydraulic Suspension type: Hydraulic Tires: 245/70 R17.5 Kingpin: 3.5" Color: RAL 5009 Azure Blue Gooseneck length: 3700 mm Overall width of the vehicle: 2990 mm Platform length: 15000 mm Telescopic: Yes / Length of extension 1: 8000 mm Cjdpjz Ed D Ejfx Af Ajhc Saddle height: 1415 mm Saddle load: 30,000 kg Axle load: 96,000 kg Tare weight: 36,200 kg Maximum permissible load: 126,000 kg Payload: 89,800 kg

Condition: new, NEW ! all stainless steel suitable for eurobins of 200L discharging height : ± 1.150 mm 0,37 kW Codpsz Ep Atefx Af Ashc can be operated from both sides mobile loading : max. 350 kg dimensions (l x w x h) : ± 1.020 x 1.250 x 1.150 mm

Condition: excellent (used), gearing type: automatic, fuel type: diesel, color: other, first registration: 06/2020, Year of construction: 2020, operating hours: 8,268 h, Condition CE type: CE = More information = Technical condition: very good Visual appearance: very good Price: On request Registration number: T-23-DZR = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Cedpfsz Avx Ssx Af Aehc Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: used, Year of construction: 2022, operating hours: 3,555 h, load capacity: 2,000 kg, lifting height: 3,850 mm, fuel type: diesel, construction height: 2,546 mm, gearing type: automatic, Equipment: head guard, Linde H20D Diesel Counterbalance Forklift ? 2.0t Lifting Capacity ? 3.85m Lift Height ? Overhead Guard ? Very Well Maintained Csdpfx Afoyrkn Ue Ajhc For sale is a reliable Linde H20D diesel forklift with a lifting capacity of 2,000 kg. The unit impresses with its proven hydrostatic drive and high-quality build. The forklift is equipped with a standard mast (lifting height 3,850 mm) and 1,200 mm forks, making it ideal for warehouse, industrial, and logistics applications. Features: * LED work lights front and rear * BlueSpot warning system * Comfort seat, imitation leather * Roof, front, and rear windshields * Panoramic interior mirror * Hydrostatic drive * Height-adjustable steering column * Forks 1,200 mm If you have any questions, we are at your disposal at any time.

Condition: good (used), axle configuration: 2 axles, first registration: 02/1968, color: blue, Year of construction: 1968, Rear axle 1: Double wheels Rear axle 2: Double wheels Empty weight: 7.325 kg Carrying capacity: 24.675 kg GVW: 32.000 kg Technical condition: good Visual appearance: good Cjdsz Dw D Nspfx Af Aehc Please contact Arie or Pedro for more information Fruehauf / Hydraulic Ramps / 32 Ton

Condition: excellent (used), power: 85 kW (115.57 HP), fuel type: diesel, color: other, lifting height: 3,850 mm, Year of construction: 2018, operating hours: 6,989 h, Equipment: air conditioning, GVW: 9.500 kg Dimensions (LxBxH): 722 x 226 x 311 cm Chassis type: articulated Steering: articulated Engine type: Caterpillar C4.4 ACERT Quick coupler system: Yes CE mark: yes Technical condition: very good Visual appearance: very good = Additional options and accessories = - 3rd hydr. circuit - Blower - Central lubrication - Hydraulic quick coupler - Work lamp(s) Chsdpfx Afjz Dqzze Ajc = Remarks = Drivetrain Stage / Tier: Stage IV / Tier IV final General Country of production: Engeland Condition CE type: CE Hydraulic quick coupler, central lubrication, 20 km/h

Condition: used, Year of construction: 2022, operating hours: 4,800 h, Equipment: ABS, all wheel drive, Volvo L 150 H wheel loader Year of manufacture: 2022 The machine is in very good condition and has only 4,800 operating hours. Air conditioning, Central lubrication system Chjdpfxjzhrcke Af Aoc Tires have approximately 85% tread remaining.

Condition: used, Year of construction: 1998, operating hours: 6,120 h, Equipment: all wheel drive,

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 4,800 h, load capacity: 4,200 kg, lifting height: 6,500 mm, free lift: 2,000 mm, fuel type: gas, mast type: duplex, construction height: 3,200 mm, fork carriage width: 3,100 mm, fork length: 1,800 mm, empty load weight: 7,900 kg, drive type: Treibgas, construction width: 3,400 mm, Four-way side loader Load center: 600 Mast type: Duplex Condition: Ready for use and fully functional Technical condition: very good Front tire type: Superelastic Rear tire type: Superelastic Description: In addition to this Combilift model, we have approximately 200 heavy-duty forklifts, compact forklifts, reach trucks, and side loaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Lease-to-own and financing options are available from us at favorable terms. We would also be happy to buy your used vehicle outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed information about this C4800. P.S.: Our forklift workshop specializes in the repair, maintenance, overhaul, and special construction of forklifts from 8 tons upwards. We would also be happy to offer your vehicle for consignment sale. Fork positioner, Codpjz Ewfisfx Af Aohc Full cabin, full free lift

Condition: used, functionality: fully functional, Year of construction: 2008, operating hours: 9,444 h, load capacity: 3,000 kg, lifting height: 4,120 mm, fuel type: diesel, mast type: simplex, construction height: 2,600 mm, fork carriage width: 1,200 mm, fork length: 1,200 mm, empty load weight: 4,900 kg, total length: 1,940 mm, drive type: Diesel, construction width: 2,200 mm, Four-Way Side Loader Load Centre: 600 Fork Width: 150 mm Fork Thickness: 50 mm Mast Type: Standard Condition: Ready for operation and fully functional Chedpfxsz Ewago Af Asc Technical Condition: Very good Front Tyres Type: Cushion Front Tyres Size: 16x7x10.5 Rear Tyres Type: Superelastic Rear Tyres Size: 23x10-12 Description: In addition to this COMBILIFT model, we currently have approximately 200 heavy-duty forklifts, compact forklifts, counterbalance and side loaders available in our Hamburg and Gdansk warehouses. Visit our website - sago-online. Leasing and financing on favourable terms are always possible. We are also happy to purchase your used machine outright, even if you do not buy a vehicle from us. Our proprietor, Mr Peter Sawitzki, will be pleased to provide you with comprehensive advice on this C3000. P.S.: Our master forklift workshop specialises in repair, maintenance, overhaul and custom builds for forklifts from 8 tonnes upwards. We can also exhibit your vehicle for consignment sale upon request. Fork Positioner, Full Cabin, Platform Height: 490 mm

Condition: used, functionality: fully functional, Year of construction: 2001, operating hours: 8,632 h, load capacity: 4,000 kg, lifting height: 6,800 mm, free lift: 2,060 mm, fuel type: gas, mast type: triplex, construction height: 3,280 mm, fork carriage width: 3,100 mm, fork length: 1,150 mm, empty load weight: 6,100 kg, total length: 2,620 mm, drive type: Treibgas, construction width: 2,440 mm, Four-way side loader Load center: 600 mm Fork width: 150 mm Fork thickness: 50 mm Mast type: Triplex Chedpfoz Ewamsx Af Asc Condition: Ready for operation and fully functional Technical condition: Very good Front tires type: Superelastic Front tires size: 200/50x10 Rear tires type: Superelastic Rear tires size: 27x10-12 Description: In addition to this Combilift model, we have around 200 heavy duty forklifts, compact forklifts, forklift trucks, and side loaders available at our warehouses in Hamburg and Gdansk. Visit our homepage - sago-online. Leasing and financing on attractive terms are always possible for us. We also gladly purchase your used machines directly, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be pleased to provide you with detailed advice on this C4000. P.S.: Our master forklift workshop specializes in repair, maintenance, overhaul, and custom builds for forklifts from 8 tons. We are also happy to offer your vehicle on consignment sale in our facility. Fork positioner, Fork positioner opening range: 660 / 3001 mm; Full free lift, Platform height: 540 mm

Condition: used, functionality: fully functional, Year of construction: 2003, operating hours: 9,871 h, load capacity: 5,000 kg, lifting height: 6,040 mm, free lift: 870 mm, fuel type: electric, mast type: simplex, construction height: 4,030 mm, fork carriage width: 1,760 mm, fork length: 1,620 mm, empty load weight: 10,694 kg, total length: 4,200 mm, drive type: Elektro, construction width: 2,770 mm, Four-way side loader Load center: 800 Fork width: 200 mm Fork thickness: 50 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tire type: Solid tires Front tire size: 660/250-480 Rear tire type: Solid tires Rear tire size: 413/178-285.8 Cjdpoz Evtfjfx Af Ashc Battery voltage: 80V Battery capacity: 775Ah Battery year of manufacture: 2017 Description: In addition to this Baumann model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our Hamburg and Gdansk warehouses. Visit our website – sago-online. Lease-purchase and financing options are available at favorable terms. We would also be happy to buy your used forklift, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this 50/18/60 STC8.5. P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and custom fabrication for forklifts starting from 8 tons. We would also be happy to offer your vehicle for consignment sale at our facility. Fork positioner, Platform height: 530 mm

Condition: used, Year of construction: 2005, operating hours: 6,784 h, LIEBHERR L 506 Wheel Loader Year of manufacture: 2005 * Quick coupler Codpfsz El Dmjx Af Ajhc * 42 kW * Max. speed: 20 km/h * Total weight: 6,300 kg * German machine

Condition: new, maximum load weight: 30,160 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory with immediately and shortly available vehicles on our website. The following is an excerpt of the equipment. Complete equipment available upon request. Frame: Steel welded construction with a front frame bend, front corners chamfered and a chamfer at the rear. Access ramp with excavator bucket recess in the center = a recess at the rear between the longitudinal beams, approx. 2,300 mm long, integrated into the outer frame. - 4 pairs of approx. 4-tonne lashing points - 7 pairs of recessed, retractable approx. 10-tonne lashing rings (2 x on the raised platform, 1 x in the front bend slope, 3 x in the low bed between the wheel wells, and 1 x in the access ramp) - 2 pairs of wheel wells - 1 pair of wheel wells, approx. 2,300/1,270 x 400 mm (L1/L2 x W), in front of the bend, including a one-piece, drive-over aluminum cover, for a maximum surface load of approx. 11,650 daN/piece. - 1 pair of wheel wells, approx. 1,390/590 x 270 mm (L1/L2 x W), between the 3rd and 4th axles, including a one-piece, drive-over aluminum cover, suitable for the transport of wheel loaders with a wheelbase of approx. 2,700-3,600 mm, with wheel diameters of approx. 1,485-1,740 mm, maximum rear overhang of the wheel loader of 2,220 mm. - Width between the wheel wells approx. 1,255 mm (= outer/outer longitudinal beam) Frame attachments: - 5 pairs of mounting pockets in the outer frame for rectangular tube supports, approx. 100x50x5 mm (3 x in the low bed and 2 x on the raised platform). - Without rectangular tube supports. - On both sides of the low bed platform, retractable widening extensions with softwood planks approx. 50 mm (the track width of the construction machines to be transported must not exceed the outer frame width of approx. 2,550 mm). - 4 pairs of folding approx. 10-tonne lashing rings, arrangement: 1 pair at the front of the raised platform, inside the longitudinal beams; 1 pair at the very rear in the excavator bucket recess, left and right; 1 pair at the front of the raised platform, in front of the bend, inside the longitudinal beams; 1 pair in the low bed at the rear in front of the access ramp, in the excavator bucket recess, left and right. Towing device: - Fixed drawbar with approx. 50 mm heavy-duty towing eye, bent design, silent block bearing, drawbar locking spring with tensioner. - Truck coupling height from approx. 820 mm to approx. 1,010 mm. - Drawbar length approx. 1,800 mm. Support system: - 2 hydraulic supports at the rear, to be operated individually, control unit housed in a separate stainless steel box. Axles: - SAF air suspension low loader axles with drum brakes, load capacity approx. 11 tonnes/axle, S-cam brake approx. 300/200 mm, automatic brake linkage adjustment. Wheels: - 16 wheels, tires 245/70 R 17.5, 146/146F, manufacturer Conti HTR2 (tire load capacity approx. 12 tonnes/axle). Braking system/suspension: - Braking system according to ECE regulation R13, two-line pneumatic braking system. - Braking system manufacturer Wabco EBS system 4S3M, 1st and 3rd axles sensed, RSS/RSP stability program, spring brake parking brake on 3rd and 4th axles. - Aluminum air reservoirs for a total weight of 44 tonnes. - Brake/air connection lines with 2 individual coupling heads, yellow/red. - EBS/ABS connection cable. - Rubber strap as a holder for EBS and electrical plugs. - Air suspension with lifting and lowering device, to be operated separately at the front and rear. - Automatic adjustmen Csdpfjz Ed Azox Af Ashc

Condition: used, axle configuration: 2 axles, total length: 1,57,000 mm, total width: 25,500 mm, Year of construction: 2008, Equipment: ABS, = Additional Options and Accessories = - EBS - Electronic Braking System - Air suspension, rear Cjdpfxoz Engko Af Ashc - Air suspension, front = Notes = For inquiries regarding the vehicle, please contact Mr. Seidel (at tel. ). Used EBERT forestry semi-trailer, low-bed trailer, type: TLS 36 ST, VIN: W0985180080D17001 self-supporting, with ECAS air suspension, fully hydraulically steered with remote control & ABS First registration: 03/2008, Permissible gross weight: 36,000 kg, Saddle load: 16,000 kg, Rear axle load: 20,000 kg, MOT: 01/2007, Low-bed length: 8,750 mm, Length: 15,700 mm, Width: 2,550 mm, Payload approx.: 27,000 kg The forestry machine is transported at a height of approx. 10-25 cm above the road surface. Tires: 235/75R/17.5 low-profile, tubeless. Tire tread: 1st axle 9-12 mm, 2nd axle 7-11 mm Axles: 2 x 10 tons Axles with S-cam brakes and ABS, hydraulically actuated two-circuit forced steering controlled from the kingpin. Saddle plate with 2-inch kingpin and drive-away wedge. 24V electric generator with HD piston pump, oil tank and 2 batteries enable remotely controlled functions via wireless remote control. Brakes: Two-line brake system according to EC with spring-loaded brake cylinders acting on the rear axles. With ABS Lighting according to StVZO (German Road Traffic Licensing Regulations). Integrated into a recessed underrun protection, incl. license plate holder. Also, warning lights in the pull-out marker panels for overwidth transport. The hydraulic forced steering is equipped with a wireless remote control as standard, so the driver can "steer" from the cab in tight hairpin turns and during turning maneuvers. Options included in the price: a. Yellow rotating beacon at the rear, pluggable b. with 4 pull-out marker panels (red/white) with a retracted width of 2,550 mm and an extended width of 2,750 mm or 3,000 mm. c. with electro-hydraulically operated ramps Upon request, we will provide you with a leasing or financing offer. Mr. Seidel (tel. ) will be happy to assist you. Further information can be found on our website. ... Errors, changes and prior sale reserved !!! - Steering axle = Further information = Unladen weight: 9,000 kg Payload: 27,000 kg GVW: 36,000 kg Last inspection: 2027-01 Please contact Tobias Ebert for further information.

Condition: used, Year of construction: 2020, Due to the large number of unserious emails, not all emails will be answered. WhatsApp RX 70-35 Diesel Hybrid, year of manufacture 2020, ready to drive Csdpfx Ajz Edv Isf Ajhc RX 70-35 Gas, year of manufacture 2020, ready to drive RX 70-35 Gas, year of manufacture 2020, for spare parts RX 70-45 Gas, year of manufacture 2020, for spare parts RX 70-70 Diesel-Hybrid, year of manufacture 2018, for spare parts "ERRORS, TYPOS, AND PRIOR SALE EXCLUDED"

Condition: used, Year of construction: 2022, operating hours: 2,487 h, Equipment: all wheel drive, JCB 3CX Compact backhoe loader from the year 2022, including a hydraulic hammer and 3 buckets! ---- Chedpfxoz Ed Dlj Af Aec * Manufacturer: JCB * Model: 3CX Compact * Year of manufacture: 2022 * Recorded operating hours: approx. 2,487 * Operating weight: 6,275 kg * Power: 55 kW * Includes hydraulic hammer * Includes 3 buckets * Good condition! * Telescopic arm * Folding bucket * More photos and video available upon request (WhatsApp Erik) * Price: EUR 49,900, net + 19% VAT ---- For further questions, please call: Erik Kortum: WhatsApp All information is provided without guarantee; errors and prior sale are reserved.

Condition: new, empty load weight: 9,150 kg, maximum load weight: 30,850 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, loading space length: 9,100 mm, suspension: air, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, ABS, air suspension with lifting and lowering, axle load scales, total loading area length approx. 9,100 mm, low bed approx. 6,900 mm long, loading height approx. 890 mm, 24 x lashing eyes each 10 t, 12 x stake pockets in the outer frame, loading ramps (approx. 3,100 x 760 mm), climbing bar on the outside of the ramps and rear slope, loading ramps adjustable to the side, wooden floor 68 mm thick, storage box with lid for lashing chains or tensioning belts, contour marking according to regulations, rotating beacon, spring-loaded parking brake, , including axle load indicators, , vehicle hot-dip galvanized, , --  Misprints, errors and changes excepted, sample pictures --, More data at: !, More Details: ! Codpfx Aoz Halnef Ashc

Condition: used, empty load weight: 8,950 kg, maximum load weight: 31,050 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 07/2024, suspension: air, tire size: 235/75R17,5, color: other, gearing type: other, front tire size: 235/75R17,5, rear tire size: 235/75R17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, ABS, air suspension with raising and lowering function, axle load scales, total loading area length approx. 9,100 mm, low-bed approx. 6,900 mm long, loading height approx. 890 mm, 24 x lashing points, each with a capacity of 10 tons, 12 x pocket slots in the outer frame, loading ramps (approx. 3,100 x 760 mm), climbing bar on the outside of the ramp and rear slope, loading ramps adjustable laterally, 68 mm thick wooden floor, storage box with lid for lashing chains or tie-down straps, incl. axle load indicators, vehicle hot-dip galvanized, -- subject to printing errors, errors and changes, sample images --, more data available at: !, More Details: ! Chjdpfx Aez Hal Ujf Asc

Condition: used, functionality: fully functional, power: 71 kW (96.53 HP), color: gold, operation weight: 9,000 kg, Year of construction: 2005, operating hours: 7,000 h, Equipment: cabin, pallet forks, quick-change device, standard shovel, Volvo L40 B TP wheel loader Year of manufacture: 2005 7,000 hours 9,000 kg 71 kW Volvo engine Chodpfsz E R Dfjx Af Aec Fork + bucket Quick coupler Additional hydraulic circuit

Condition: used, Year of construction: 2016, operating hours: 3,318 h, Equipment: all wheel drive, * Enclosed cabin Codpfxoz E Uhuj Af Ashc * Quick-change system * Bucket * Fork * Rotating beacon ----Vehicle number: 12486----Errors and prior sale excepted----Advertisements and various markings have been digitally removed.----We are happy to assist you with all the formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of everything. Among other things, we can offer you the following services for an additional fee:----Trade-in of your old vehicle, TÜV/SP inspection, complete export processing, assistance with financing, application for export license plates, vehicle transportation, vehicle registration, recovery and vehicle transport.----?YOUR VTS TEAM

Condition: used, power: 157 kW (213.46 HP), machine/vehicle number: CATIT62HEM5G00603, In working order. Csdpfx Aovwbd Tsf Ashc

Condition: new, maximum load weight: 35,240 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 13,200 mm, total length: 13,200 mm, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, Kässbohrer K.SLH S HS 3 / 3H – 18 / 30 Low-bed trailer / 3-axle / hydraulically steered Immediately available, also available with a grating floor. Manufacturer: Kässbohrer * Type: K.SLH S HS 3 / 3H – 18 / 30 * 3-axle low-bed trailer * BPW axles * Air suspension * Drum brakes * 1st, 2nd, and 3rd axles hydraulically steered * Axle liftable * Manual lift axle control * WABCO EBS 2S/2M with ABS and RSS * Tires: 245/70 R17.5 * M+S / 3PMSF tires * Tire pressure monitoring system * WABCO SmartBoard * Electric motor pump for steering * Semi-automatic tracking of the hydraulically steered axles Dimensions / Weights: Overall length: 13,250 mm * Overall width: 2,550 mm * Fifth wheel height: 1,250 mm * Gooseneck length: 3,900 mm * Platform length: 9,300 mm * Platform height: 875 mm * Wheelbase: 8,800 mm * Axle distance: 1,360 mm * Tare weight: approx. 12,760 kg * Technical axle load: 30,000 kg * Fifth wheel load: 18,000 kg * Technical total weight at 80 km/h: 48,000 kg * Technical total weight at 40 km/h: 51,000 kg Wiese Transporttechnick - Dealer Chassis / Loading platform: High-strength S700 MC steel * 45 mm hardwood floor * Steel floor with drop structure over the wheels Chsdpfoz Ec Trox Af Aec * Lateral widening * Widening up to 300 mm * 2" kingpin * Mechanical rear supports, load capacity 45 t * Partially metallized chassis * Rear end tapered by 500 mm / 10° Wiese Transporttechnick - Dealer Ramps: Hydraulic, folding ramps * Ramp load capacity: 40 t * Ramp length: 2,750 mm * Ramp width: 850 mm * Hydraulically adjustable * Hardwood surface * Hydraulic gooseneck ramps * Ramp securing via chain tensioners Wiese Transporttechnick - Dealer Load securing / Equipment: Tie-down points: 10 × 10 t / 12 × 8 t / 22 × 5 t * 16 lashing pockets 80 × 80 mm * 4 container locking pockets for 1 × 20 ft * Tool box on the gooseneck, approx. 2,540 × 600 × 460 mm * Central lubrication system * LED rotating beacon * 2 work lights at the rear * Extendable warning boards with LED position lights * Storage box for widening planks * Chassis color: RAL 3020 Traffic Red Other: LED lighting * Aspöck EUROPOINT 3 LED * Spare wheel holder * 12 rims/tires * Widening panels * Extensive heavy-duty / construction machinery equipment Errors, changes and prior sale are subject to change.