Used Water Jet Sweden Nc 4030B for sale (11,282)

Condition: used, This listing is for an ÄKTA ready™ Chromatography System The unit is in full working condition and is ready for immediate release The ÄKTA ready™ Chromatography System is a single‑use liquid chromatography platform engineered for bioprocessing, process scale‑up, and GMP‑regulated manufacturing of biologics, including monoclonal antibodies, recombinant proteins, viral vectors, nucleic acids, and other sensitive therapeutic products. Key Characteristics Csdsyitvpepfx Antsha - Single‑use disposable flow paths — eliminate the need for cleaning and cleaning validation between runs, reduce downtime, and minimize cross‑contamination risk. - Flexible operation — available in multiple configurations (isocratic, gradient, variable UV, extended) to match different purification needs. - Scalable platform — flow kits for low and high flow rates support a wide range of process volumes; systems scale from small‑batch purification to larger process requirements when paired with larger ÄKTA ready™ XL models. - Designed for GMP environments — extensive documentation and regulatory support help meet compliance demands in regulated biopharmaceutical production

Condition: used, This listing is for the Grant GD120 Water Bath/Circulator The unit is in full working condition and is ready for immediate use The Grant GD120 is a digitally controlled stirred water bath and circulator ideal for laboratory use, offering high precision and flexibility. Here's a breakdown of its features and capabilities: Key Features Immersion Thermostat with Intelligent Control Optimisation (ICO): Enables adaptive PID control for exceptionally stable temperature regulation. Chedpfjxhfl Esx Antea Integral Pump: Built-in circulation pump with a maximum flow rate of 17 L/min, allowing both sample immersion and external fluid circulation. User Interface: Equipped with a clear digital display, a rotor plus two-key control, timer function for reaction timing, and visual + audible alarms to notify operators of critical conditions. Preset Temperature Control: Supports one adjustable operating setpoint plus three preset temperature options for fast switching. Safety Features: Includes float-switch low liquid protection and an adjustable over-temperature cut-out for sample and user safety. Liquid Type Selection: Automatically adjusts heater power and temperature parameters depending on chosen liquid (e.g., water, oil, glycol mixtures). Temperature Range & Accuracy Plastic Tanks (P-series): From around ambient +5 °C up to ~99 °C. Stainless Steel Tanks (S-series): From –15 °C up to ~120 °C. High Stability: ±0.02 °C for stable temperature control. Technical Specifications & Obsolescence The GD120 series includes multiple tank sizes: plastic tanks (P5, P12, P18) and stainless steel tanks (S5, S12, S18, S26, S38), offering varied capacities for different lab needs. This series is now considered obsolete, though it remains functional and reliable for many applications. Supporting Documentation & Manual Operating Manual: The GD120 is covered by the general purpose stirred thermostatic baths manual (shared with GD100), outlining temperature settings, calibration procedures, safety guidance, and maintenance. Datasheet Summary: Positioned within the broader Grant Optima product range, the GD120 sits between simpler (GD100, up to 100 °C) and higher-spec models (GR150 up to 150 °C, GP200 up to 200 °C)

Condition: used, This listing is for the Veolia/Elga PC1ANRXM2 Purelab Chorus The unit is in full working condition and is ready for immediate release The Veolia ELGA PURELAB Chorus 1 Complete is a high-performance water purification system engineered for laboratories demanding the highest water purity. It is ideal for supporting analytical research, quality control (QC) testing, and pharmaceutical manufacturing processes, delivering reliable Type I ultrapure water. Key Specifications Water Quality: 18.2 MΩ·cm resistivity (Type I) Flow Rate: Up to 20 litres per hour Features: Advanced PureSure® deionization for consistent water quality Chodpfjxv A Uajx Antoa Fully recirculating system to maintain microbial purity Real-time TOC monitoring to ensure organic purity Integrated filtration for endotoxins, proteins, particulates USB data capture for performance validation Optional ELGA Biofilter for biologically active impurities Cost-effective design supporting QC testing to validate drug purity in pharmaceutical manufacturing Consumables engineered to minimise cost and environmental waste Ideal Applications Analytical Research Life Sciences Pharmaceutical QC Testing Glassware Washing and Ultrapure Feed Systems

Condition: used, Year of construction: 2011, machine/vehicle number: M337, Used RAVECCO MORAVEC filling triblock 12-12-1C for waterTechnical Specifications & Performance DataThis second hand Filling Monoblock by Raveco Moravec combines rinsing, filling, and capping in a compact rotary platform designed for efficient beverage production and industrial packaging. Engineered for glass bottles, it is a reliable choice for a used bottling line seeking flexible closure options and straightforward integration.Manufacturer: Raveco MoravecModel: 12-12-1C MonoblockSpeed: 2.500 BPH ( Bottle per hour)Configuration: 12 rinsing grippers, 12 filling valves, 1 capping headContainer types: Glass bottlesBottle formats: Compatible with 0.33L, 0.5L, 0.75L, 1.0L bottle formatsNeck finish: Long neckClosures: crown capsConstruction year range: 2009–2011Machine type: Rinser–Filler–Capper monoblockAdvanced Automation & Control SystemsThe machine utilizes a Moravec control platform with manual operation, providing straightforward and dependable control for operators. Core functions for rinsing, filling, and capping are synchronized within the monoblock to maintain consistent bottle handling and process timing. Operator access is designed for quick intervention and basic parameter adjustments, supporting reliable changeovers between closure types.Moravec control system with manual operationSynchronized monoblock timing for rinse–fill–cap sequenceOperator-friendly controls for format adjustmentsStandard emergency stop and interlocked guarding typical of industrial packaging machineryProduction Line Integration CapabilitiesThis Filling Monoblock is configured for a straight-line conveyor layout, enabling smooth integration within a used bottling line or operation as a standalone module. It accepts a range of glass bottle formats and supports quick format and closure changeovers, making it suitable for flexible beverage production environments.Inline integration on straight conveyor layoutsStandalone or in-line operation within broader bottling equipmentFormat flexibility from 0.33L to 1.0L glass bottlesChangeover capability crown closuresMachine Condition & Maintenance HistoryThe equipment is currently in occasional operation and has been in service approximately 25 hours per week during recent use, with remaining time on standby. It has been serviced regularly over the past year of ownership. Testing is available, including both dry run and production tests, to verify operational performance before integration into a second hand production line.Operational status: Occasional operationTesting availability: Dry run and production test possibleService status: Regularly serviced during recent useDocumentation: Technical manuals and schematics not on handSpare parts: Not includedOperational Performance & VersatilityDesigned for glass bottles with a long-neck fi... Codpfx Asy Uvhmjntjha

Condition: used, machine/vehicle number: LC594, Used Sidel Alsim PET bottling line for carbonated water and drinks - 14.000 bphTechnical Specifications & Performance DataThis complete PET bottling line is engineered for carbonated water and soft drinks, delivering consistent output and reliable quality for beverage production. It combines high-efficiency blowing, isobaric filling, labeling, packaging, and end-of-line automation into a cohesive used bottling line suitable for second hand industrial packaging operations.Production speed: 13,000–14,000 bottles per hourContainers: PET bottles, neck finish 28 1881Blow molder: Sidel SBO10, 10 cavitiesPreform handling: Sidel EBH 2050 preform hopperAir conveyor: Sidel-AlsimRinser/Filler/Capper monoblock: Sidel-Alsim PET Trybloc Asmojet 1T RV-P 48/60/10KRinser: 48 clamps, 1 water treatmentFiller: 60 isobaric valvesCapper: 10 headsPremix/Mixer: Sidel-Alsim, 30 m³/h outputBottle dryer: ACILabeling machine: Krones Contiroll, rotary, 15 dishes, PET wrap-around, roll-fedShrink wrapper: Acmi Fenix, film-only configurationHandle applicator: Smipack HA 35-50-70Palletizer: Alsim Valiant 1I 1P, fully automatic, push-typePallet wrapper: PM Pragometal OBS Rotomatic StandardAdvanced Automation & Control SystemsThe line integrates component HMIs and automatic control features at each station to streamline operation and changeovers. The isobaric filling block ensures precise filling for carbonated beverages, while the roll-fed rotary labeling system supports continuous, high-speed label application. Quick-change mechanical adjustments and format components help maintain uptime and reduce setup times in beverage production environments.Production Line Integration CapabilitiesDesigned for inline operation from preform loading through palletizing, the system features smooth bottle transfer via air conveyors and synchronized starwheels in the filling monoblock. It integrates upstream blowing with downstream labeling, shrink wrapping, handle application, and palletizing, creating a complete packaging machinery solution. The line is suitable for carbonated water and soft drinks and supports multiple PET bottle formats and heights associated with the 28 1881 neck finish.Machine Condition & Maintenance HistoryThis second hand line is available for sale and is presented in ready-for-operation condition. Component years range from 1996 to 2019, reflecting a well-curated selection of bottling equipment. Buyers can arrange inspection to assess performance, equipment condition, and overall line integration prior to deployment in beverage production.Operational Performance & VersatilityOptimized for carbonated products, the isobaric filler provides accurate CO₂ retention and foam control. The Sidel blow molder delivers stable bottle quality, while the Krones Contiroll rotary labeler ensures precise PET wrap-around label appli... Chsdsydn A Hjpfx Antoa

Condition: new, Year of construction: 2026, CW-5200TH Water Chiller by S&A — Stable Cooling for CO₂ Laser Plotters The S&A CW-5200TH chiller is an industrial water cooling system designed for cooling CO₂ laser tubes in laser cutting plotters, laser engravers, and other devices requiring a stable coolant circulation system. S&A is a well-known brand in the laser cooling industry, recognized for reliable chillers, stable operation, and effective protection of CO₂ laser tubes against overheating. Thanks to its active cooling system, the CW-5200TH maintains coolant temperature at an appropriate level, improving laser tube safety, operational stability, and the repeatability of cutting and engraving results. Why choose the S&A CW-5200TH chiller? Stable coolant temperature control The chiller reduces the risk of laser tube overheating during extended operation and intensive workloads. CO₂ laser tube protection Proper cooling helps extend the service life of the laser tube and reduces the risk of failures caused by excessive operating temperatures. 8-liter coolant reservoir The larger tank capacity improves temperature stability and supports consistent coolant circulation. Maximum pump lift height of 12 m The built-in pump ensures efficient coolant circulation throughout the laser cooling system. Compact design The unit requires little installation space and can be easily positioned next to a laser plotter or workstation. 220–240 V power supply The chiller is designed for standard single-phase electrical supply. Applications Csdpfx Asg Nkvrentsha The S&A CW-5200TH chiller is suitable for cooling: CO₂ laser cutting plotters, CO₂ laser engraving machines, water-cooled laser tubes, equipment requiring precise coolant temperature stabilization. It is particularly recommended for users who rely on laser plotters as everyday production equipment and require stable, uninterrupted operation. Technical specifications Parameter Value Model S&A CW-5200TH Device type Industrial water chiller Power supply AC 1P 220–240 V Frequency 50/60 Hz Current consumption 0.5–3.8 A Reservoir capacity 8 L Maximum flow rate 13 L/min Connections (inlet/outlet) 10 mm Rated cooling capacity 1.43 kW Refrigerant R-134a Maximum pump lift height 12 m Net weight 28 kg Dimensions (L × W × H) 580 × 290 × 470 mm

Condition: used, Year of construction: 2026, CW-3000 Water Chiller for CO₂ Laser Engravers and Cutting Plotters The CW-3000 is a compact water cooling system designed for CO₂ laser engravers and cutting plotters, suitable for laser tubes with a power rating of approximately up to 80 W. It maintains a stable coolant temperature, protecting the laser source against overheating and power fluctuations. It is a simple and effective solution for achieving consistent cutting and engraving quality while reducing the risk of production downtime. The unit uses an efficient fan and heat exchanger system, making it lightweight, space-saving, and easy to integrate into existing cooling installations. Why CW-3000 improves process safety and quality Protection of laser components – stable cooling reduces temperature fluctuations inside the laser tube and minimizes the risk of thermal overload of the entire system (tube, power supply, connectors, and water circulation circuit). This ensures safer and more predictable operation. Extended CO₂ laser tube lifespan – maintaining the recommended operating temperature range helps preserve output parameters for longer and delays the need for tube replacement. Improved cutting and engraving quality – stable temperature means stable laser beam power, helping achieve consistent results, cleaner edges, and fewer corrections. Chsdpfx Ansi D D Rvotoa Continuous production operation – reduced risk of thermal alarms and cooling-related interruptions ensures a more predictable workflow. Cost-effective operation – simple construction, compact dimensions, and low power consumption make daily operation easier and help reduce maintenance costs. Applications The CW-3000 cooling system is designed for: CO₂ laser plotters and engravers used in light and medium-duty applications where repeatable quality and low operating costs are important. Advertising workshops, prototyping studios, and small production facilities where reliable cooling is required with limited installation space. Recommended operating practices Use clean coolant and regularly check the fluid level; ensure the circulation system remains unobstructed and all connections are leak-free. Provide sufficient airflow around the heat exchanger and cooling fan. Periodically clean the filter and reservoir and check the coolant flow to maintain efficiency and protect system components. Technical specifications Parameter Value Power supply 230 V Current consumption 0.45 A Cooling capacity 50 W/°C Tank capacity 9 L Connections (inlet / outlet) 10 mm Maximum operating height 10 m Maximum flow rate 10 L/min Weight 9.5 kg Dimensions (L × W × H) 49 × 27 × 38 cm Please note!!! This product is a return item with visible signs of wear and dents. No warranty included.

Condition: good (used), Year of construction: 2004, functionality: fully functional, Technical details x-travel 620 mm y-travel 420 mm z-travel 400 mm Control Heidenhain TNC 410M Chedpfozruwlox Antoa table surface area 800 x 400 mm tool taper ISO 40 spindle turning speed - stepless 50 - 4000 U/min main drive motor 5,5 kW weight of the machine ca. 2,1 t Additional information * CNC control HEIDENHAIN TNC 410M * Coolant equipment * Machine lamp

Condition: new, Year of construction: 2026, working width: 1,300 mm, bending angle (max.): 135 °, sheet thickness aluminum (max.): 1 mm, total width: 1,900 mm, total height: 1,900 mm, warranty duration: 12 months, insertion depth: 1,250 mm, opening width: 105 mm, Equipment: documentation/manual, SUMMER DISCOUNT DINAMIC LINE Ltd. has been manufacturing machinery since 1994. All machines are certified, CE marked, and accompanied by a Declaration of Conformity. Our products are exported across the globe: Italy, Austria, Germany, Switzerland, Spain, Belgium, Turkey, Slovenia, Croatia, Bulgaria, Romania, Moldova, Hungary, Slovakia, Lithuania, Albania, Poland, Bosnia, Montenegro, Kosovo, North Macedonia, Australia, New Zealand, North America, Africa, Russia, Thailand, Malaysia, Tasmania, etc. By agreement with the customer, delivery can be organized under CPT (Carriage Paid To) terms to the customer’s premises. Assembly is not required - ready to use immediately. Quick delivery time Specifications: Working length: From 2 meters to 9 meters Working width: 1300mm Space requirements: 8800 x 1900 x 1800 Metal sheet bending thickness: 0.8mm / Al - 1.00mm Bending angle: 135° Machine weight: 3500kg Power requirements: 3kw/16A Motor power: 2.2 kW Opening width: 105mm Insertion depth: 1250mm Bending beam thickness: 15mm or 20mm Foot switches: for 2 operator Characteristics: Ultra-fast Hyper production Hydraulic tightening and bending Electric cutting device Precise servo drive adding device Semi or automatic working mode Multi security system Automatic work by 1000 programs & subprogram Automation by PLC HMI Touch screen Friendly interface - incremental programming Remote programming & control Cjdpegmhxasfx Antsha Real time simulation & diagnostic LAN & Wi Fi communication Offset angle adjustment SPRING DISCOUNT

Condition: used, Year of construction: 2007, DOALL TYPE: C4100 NC AUTOMATIC FEED Chjdsw U N I Espfx Antoa YEAR: 2007

Condition: good (used), Min. Pipe length: 100-1800 mm Cedpfsq U Rccex Antoha The system was previously used for deburring cut pipes!

Condition: not inspected (used), Manufacturer: STORK capacity: 375m3/h motor: 90 kW Chsdpfom Twrzex Antja

Condition: not inspected (used), Manufacturer: Stork Capacity: 660 m3/h Chsdpfx Aom Uc R Ujntoa Engine: 160 kW

Condition: used, x-travel 560 mm y-travel 500 mm z-travel 410 mm Control Heidenhain TNC 355 Cjdpfjzq Hllox Antoha In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, x-travel 560 mm y-travel 500 mm z-travel 410 mm Control Deckel Dialog 11 Chodpszq Hk Uefx Antoa In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Year of construction: 2016, TECHNICAL DATA AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting working area mm 0 x 800/0 x 800 X axis stroke mm 750 Max. travel speed of X-Y axes m/min 25 DRILLING UNIT Vertical spindles Number 7 (4X-4Y one common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed grooving saw (direction) X Grooving saw diameter mm 100 Max. grooving saw thickness mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Grooving saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 80+80 F10L Drilling unit Includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. Diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit. Positioning of the workpiece and drive of the work unit: A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the work unit during machining. Movement in the X and Y axes takes place on THK guides with transmission to reinforced toothed rails. Movement in the Z axis is pneumatically controlled on ball-bushing guides with adjustable stop positioning. The positioning of the work units is carried out using technology and drives with DC motors. CNC CONTROL The control system was specially developed for use in drilling and milling machines. CN - 7" color screen with touchscreen function - Alphanumeric keyboard - Self-diagnosis and any error messages or malfunctions that may occur, in the operator's language Programming - Programming via the CN - Automatic optimization of drilling operations - Option of plate zero point shift - Option of saving and importing drilling programs via USB dongle - Option of importing drilling programs from CAD-CAM external software Configuration - User interface in the same language as the instruction manual Graphic representation of the unit configuration Vacuum suction cups "B-Power Vacuum suction cups with double vacuum connection, recommended for particularly porous panels (e.g. MDF light). Machine user interface software Xilog Maestro USB Hardware and software requirements: - Operating system: Windows XP Professional (SP2), Windows Vista or Windows 7 - Processor: Intel compatible, 2GHz min; Multicore processor recommended - Memory capacity: 1GB min., recommended 2GB - Free disk space: 5GB - Graphic card: Compatible OpenGL (The code includes a DVD for installation and a USB key) Xilog Maestro Features Programming - Parametric, graphic programming - Assisted programming with graphic and syntax help for drilling operations - Possibility to create and save machining macros Integrated additional functions - Self-diagnosis and possible error messages or malfunctions, in the operator's language - User interface in Codpfxevvi I Ro Antjha

Condition: used, 1 water chiller, model SINGLE STW150/1-3-10-HK 400 V, 5.7 A, 50 Hz, self-disassembly Codpfx Aozqck Rontoha Color: as shown in the pictures, according to the images and inspection Dimensions L/W/H: 300x92x100 cm Condition: used

Condition: ready for operation (used), Year of construction: 2018, operating hours: 16,291 h, total height: 1,448 mm, total width: 1,238 mm, travel distance X-axis: 380 mm, product length (max.): 2,210 mm, number of axes: 3, Plastic 3D printer manufactured in 2018. This HP Jet Fusion 3D 4200 features a build volume of 380 × 284 × 380 mm and utilizes Multi Jet Fusion technology for efficient production. It is fully functional and has been in productive operation until June 2026, making it suitable for industrial production of functional end-use parts and prototyping. If you are looking to get high-quality 3D printing capabilities, consider the HP Jet Fusion 3D 4200 machine we have for sale. Contact us for further details. • Technology: Multi Jet Fusion (MJF) • Build Volume (X × Y × Z): 380 × 284 × 380 mm • Material: PA12 (Nylon 12) • Power Supply: 400 V • Electrical Connection: Three-Phase • Total Operating Time: 977453 min (approx. 16291 h) Optional Accessories • HP Processing Station • Function: Powder Processing Station • 3 × HP Build Units • 2 × HP Heating Lamps • 5 × HP Fusing Lamps Machine Condition • Fully Functional • No Known Defects • In Productive Operation Until June 2026 • Previous Application: Production of Small and Medium Series of Functional End Parts Cedpfxjzqtc Dj Anteha Additional Information • Suitable for Industrial Production • Material Processing Technology: Powder Bed Fusion (Multi Jet Fusion) • Application: Functional End-Use Parts, Prototyping, Small and Medium Batch Production

Condition: good (used), Year of construction: 2015, cutting range 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: square 250 mm capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 180 mm automatic feeds 9999,9 mm feed minimum 2.0 mm cutting diameter minimum 5.0 mm band speed 15 - 100 m/min vice 340 mm Öffnung dimensions of saw-band 3650 x 27 x 0,9 mm Control MEP CNC total power requirement 2.2 kW weight 1240 kg range L-W-H 1800 x 1900 x 1750 mm actual NEW price about 23.000 Euro special price on request Equipment: - robust electro-hydraulic fully automatic band saw (INDUSTRY) - with additional semi-automatic function, for cuts from 0° to 60° left - WINDOWS “CE” based MEP 50 – control and 7” touch screen display * simple and quick setting of all machine parameters * with additional soft keys + backlit display * 10 programs, each with a maximum of 9999 pieces and . a maximum length of 9999.9 mm - material feed with stepper motor via ball screw * single stroke 600 mm repeatable to saw any length * accuracy of ± 0.1/600 mm - feeder with protective cover and safety limit switch - precise setting of the cutting feed with indication in mm/min - positioning of the saw head and movement of the feeder using a joystick - automatic detection of the start of the cut - large deflection discs, adjustable from cast steel - Saw blade tension with blade tension control and display - Hard metal blade guides for maximum cutting precision - Automatic monitoring of the cutting load - Vice with quick adjustment * with interchangeable clamping and stop jaws - Large, laterally extendable chip tray and coolant container * equipped with 2 electric pumps for lubricating and cooling the saw blade * Coolant gun for cleaning the machine - Chip removal brush for cleaning the saw blade - Operating instructions DE Cedpfsy I Da Rjx Antoha Information from the manufacturer: When installing this saw in a network with a residual current device (FI), this should be universally current sensitive and not less than 300 mA.

Condition: new, Year of construction: 2023, cutting diameter 350 mm saw band length 4640 x 34 x 1,1 mm table height 860 mm Chedpfxslf Tu Us Antoa 350 mm 15 - 100 m/min 4,0 kW 2800 kg 2200 x 3200 x 2200 mm Display Model Current list price: 55,910 euros Fully automatic band saws with a two-column guide system for production cuts, particularly in materials that are difficult to machine and solid stock. With this machine, MEP offers you a machine that is at the highest technical level and, thanks to the use of the highest-quality materials, features an unmatched, robust, and torsionally rigid structure. An extremely robust saw frame made of gray cast iron provides the necessary stability, which leads to impressive cutting results, and the sturdy gray cast iron columns on which the saw frame glides via preloaded linear guides ensure ensure the highest cutting precision even under maximum load. The modern machine control system (MEP NC 5.0) offers the user maximum ease of operation and ensures trouble-free operation. (Monitoring/Evaluation/Correction in real time) MAXIMUM PERFORMANCE > The two operating modes (semi-automatic and automatic) enable efficient cutting under all conditions. > The control system allows for the storage of up to 100 cutting programs, each with different quantities and lengths, and minimizes programming time for frequently executed jobs. > The automatically detected starting position of the saw head reduces the setup time. > The saw headâ??s feed via linear guides driven by hydraulic cylinders with preloaded ball screws ensures reduction of mechanical vibrations during cutting and greater stability. > The automatic alignment of the front saw blade guide head based on the dimensions of the bars to be cut reduces processing time. > Saw blade tension is controlled by the brushless motor and is constantly monitored and automatically adjusted to the set minimum value. EXTREMELY FLEXIBLE > The feed system, with a 600 mm stroke, is repeatable and cuts all lengths. > The vertical roller pair allows for holding and aligning any type of bar or bundle that is fed into the machine. > The vector drive for stepless adjustment of the blade speed from 15 to 100 m/min enables the cutting of any material. > The motorized chip conveyor can be mounted to the right or left of the cutting area . FEATURES: Fully automatic control â?? NC 5.0 - Innovative (Windows CE-based) touchscreen control with additional soft- touch buttons for frequently used functions -USB port -Joystick for manual control of the axes (X-Y) -Controlled head descent with automatic compensation via a servo valve , constant monitoring of the preselected torque 4, and with precise feed rate adjustment in millimeters per minute 5 -Adjustment/preselection of the continuously variable band speed in m/min. -Band saw tension with tension monitoring and display via an electronic converter -Automatic detection of the start of the cut -Large 7" color touchscreen for displaying and selecting all machine functions and parameters, and programming in seconds. Display of detailed alarm and error messages -Numerous special functions, including executing various lengths and quantities (10 programs) as a sequence, clean cut, step-by-step execution, and much more. -Sturdy, torsion-resistant, and low-vibration saw frame made of cast steel -Carbide band guides for maximum cutting precision, hinged for easy saw band replacement -Large, adjustable cast steel idler ...

Condition: excellent (used), We offer a professional Hyfra Chilly 08/1-S cooling unit, designed for cooling machines, industrial equipment, lasers, welding machines, and other systems requiring stable liquid temperatures. The unit is fully functional, tested, and ready for operation. During testing, it reaches a temperature of 8.3°C, which confirms the correct operation of the cooling system (as shown in the picture). Technical specifications: * Manufacturer: Hyfra GmbH * Model: Chilly 08/1-S * Year of manufacture: 2006 * Cooling capacity: 890 W (at 37°C) * Refrigerant: R407C * Refrigerant quantity: 0.67 kg * Power supply: 230 V / 50 Hz * Max. current draw: 5.10 A * Connected power: 1.20 kW * Max. operating pressure: 29.5 bar * Max. ambient temperature: +42°C * Unit weight: 49 kg * Weight with water: 67 kg Chjdpfx Ajzmdtfsntoa Condition: * Used. * Technically sound. * Normal signs of use visible on the housing. * Equipped with a water filter, liquid level indicator, pressure gauge, and quick couplings. It is ideally suited for industrial applications, laboratories, and anywhere efficient and reliable water cooling is required.

Condition: used, Year of construction: 2006, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, intake vacuum (max.): 2,400 mbar, suction capacity: 6,000 m³/h, intake manifold diameter: 300 mm, filter area: 30 m², total height: 2,350 mm, total length: 3,000 mm, total width: 1,100 mm, overall weight: 900 kg, Dust extractor, chip extractor, self-cleaning pneumatic vacuum filter Alko Mobil Power JET 300 The filter is pneumatically cleaned with compressed air pulses during operation, ensuring high device efficiency. The fan is mounted on the clean air side, minimizing the risk of explosion. Ideally suited for wide belt sanders and all types of dry dust generated in various technological processes. Fan power: 7.5 kW Capacity: 6000 m3/h Vacuum: 2400 Pa Connection diameter: 300 mm Air return Chodpfx Aney A Iwcjtsa Stock number: 1130

Condition: used, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, suction capacity: 4,900 m³/h, intake manifold diameter: 250 mm, Dust extraction unit, wood chip extractor, pneumatic self-cleaning vacuum filter – Alko Mobil JET 250 The filter is cleaned pneumatically with pulses of compressed air during operation, resulting in high device efficiency. The fan is located on the clean air side, minimizing the risk of explosion. Ideally suited for wide belt sanders and for extracting all types of dry dust in various technological processes. Fan power: 6.5 kW Capacity: 4900 m3/h Vacuum: 2740 Pa Nozzle diameter: 250 mm Chedpszlcxqofx Antea Air return Stock number: 0904

Condition: new, Year of construction: 2026, The CNC plasma burner with a water table is a device designed for shape cutting of elements from a sheet of metal (in any shape). This machine is characterized by extreme simplicity and ease of use. Our CNC cutter guarantees repeatability and high cutting accuracy (0.1 mm), thanks to which burnt shapes can be transferred directly to the next stage of production. The water table ensures low consumption of consumables, raw materials and low gas emissions. No need to use fume and flue gas extraction. Why is it worth it? water table no need to use smoke and fumes extraction small size of the machine allows it to be placed anywhere THC voltage height adjuster precise setting of the torch a very precise cut requiring no further processing plate detection system Chsdpfeg Nknyex Antea convenient control panel intuitive machine operation can cut and gouge steel machine training at the buyer's/seller's premises a library of standard geometric shapes Characteristics and equipment Workspace 1500 x 3000 Y axis range 140 mm (clearance) The use of a rigid and stable structure Water Table Voltage height regulator Torch height adjustment system Torch height and stabilization sensor FastCAM program - in Polish with a license USB port and internal and external memory Friendly user interface - simple operation even for people who have never worked in programs like FastCAM Import of drawings in *.txt format from any type of program (e.g. AutoCAD, SolidWorks, etc.) MAKRO – a library of standard geometric shapes. This allows you to create figures without having to draw. NESTING – automatic arrangement of elements on the sheet DEMO - Shows the work cycle (path) without turning on the plasma or oxygen source The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: used, Year of construction: 2026, The device is designed to cool tubes in CO2 laser plotters thanks to the use of a cooling unit. The CW5200 chiller keeps the water temperature at the right level. Thanks to such cooling, the tube has stable operating parameters. The CO2 chiller ensures optimal working conditions of the tube, effectively protecting it against overheating and damage. The device is intended for people / companies where a laser plotter is an everyday work tool. Technical Specifications: Csdpfx Aszp Elzentjha Power supply - 230 [V] Current consumption - 0.25 ~ 3.1 [A] Compressor power - 0.59 [kW] Cooling capacity - 1.7 kW / 5783 Btu / h / 1457Kcal / h Coolant amount - 360 g Tank capacity - 6 [L] Connections (input / output) - 10 [mm] Working height - 12 [m] Flow - 13 [L / min] Weight - 26 [kg] Dimensions (L x W x H) - 58 x 29 x 47 [cm] Security: - Compressor overvoltage protection - Alarm for incorrect water flow in the system - Over temperature alarm The price is a net price. Price does not include shipping costs. PLEASE NOTE!!! This machine is a returned item. The signal plug is missing. NO WARRANTY!!