Used Grob for sale (49)

Condition: used, Year of construction: 2019, x-travel 800 mm y-travel 950 mm z-travel 1020 mm Control TNC640 B - axis 360 x 0,001 ° A - axis -185 / +45 x 0,001 ° feed x-axis 1 - 65.000 mm/min Ibsdoxn Amajpfx Aabec feed y- axis 1 - 50.000 mm/min Feed z- axis 1 - 80.000 mm / min. rapid traverse X/Y/Z 60 / 50 / 80 m/min spindle turning speed - stepless 1 - 16.000 U/min power capacity at 100 % load 25,00 kW power capacity at 40 % load 32,00 KW max. torque at 40% / 100% load 206,00 / 159,00 Nm tool taper HSK-A63 tool magazin: 70 tool length - max. 500 mm tool diameter 118 mm tool diameter with 2 vacant positions 260 mm tool total weight 22,00 kg Chip to chip time 4,2 sec. size of pallet 630x630 mm interference diameter 900 mm total power requirement 35,00 kW weight of the machine ca. 25,00 t dimensions of the machine ca. 7,00 x 3,50 x H3,50 m 5-axis machining center with Heidenhain TNC640 control, integrated KNOLL coolant system KF220, coolant high-pressure 23bar, coolant through the spindle, chip conveyor, measuring probe Heidenhain TS640, electromechanical tool length check, BLUM-Laser, GROB Spindle-diagnosis (GSD), kinematics-set.

Condition: excellent (used), Year of construction: 2012, operating hours: 20,000 h, functionality: fully functional, machine/vehicle number: S/N 1193, travel distance X-axis: 600 mm, travel distance Y-axis: 770 mm, travel distance Z-axis: 805 mm, rotary table diameter: 600 mm, spindle speed (max.): 16,000 rpm, spindle motor power: 35,000 W, number of spindles: 1, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, Fully operational, machine in perfect condition for sale! * 5-axis simultaneous machining * HEIDENHAIN iTNC 530 controller * Spindle HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW * HSK-A 63 tool magazine with 34 tool stations * Additional side tool magazine TM99 with 99 tool stations * HEIDENHAIN remote controller * KinematicOpt * DCM Collision (HEIDENHAIN) * Job InfraRed touch probe with HEIDENHAIN software * High-pressure through spindle cooling system (38 bar) Ijdoxpf Hfepfx Aabobc * Pressure air blow through the spindle * Chamber mist extractor * Tool cleaning system * Chip (swarf) conveyor * Oil skimmer for coolant tank * Coolant gun * Coolant washdown for chamber * Remote machine diagnostics (via network) * Voltage 400 V, 50 Hz, TN-S Machine is located at a production facility in Mielec 39-300, Poland, connected and available for trials. Buyers – Welcome!

Condition: good (used), Year of construction: 2011, X/Y/Z 600/770/805mm, spindle 12,000 rpm / HSK 63, ATC 40, swivel table unit (A'-axis), rotary table with T-slots (B'-axis) through spindle cooling, all machines with coolant tank, Chip conveyor and belt filter system, CNC Heidenhain iTNC 530; Control: CNC Heidenhain iTNC 530 Ibsdpfxeh Hlmco Aabsc

Condition: like new (used), Year of construction: 2019, operating hours: 3,000 h, TECHNICAL DATA Spindle hours: 3,000 h Dimensions and Weights Machine length: 6,452 mm Machine width: 2,900 mm Ibsdpfxowwl Sas Aabsc Machine height: 3,271 mm Weight: 25,700 kg Electrical Specifications Operating voltage: 400 V Mains frequency: 50 Hz Control voltage: 230 V Maximum connected load: 54 kVA Rated current: 77 A Main fuse: 100 A Travel Paths X-axis: 800 mm Y-axis: 1,020 mm Z-axis: 970 mm A-axis: -185° – 45° B-axis: 360° Rapid Traverse X-axis: 65 m/min Y-axis: 50 m/min Z-axis: 80 m/min A-axis: 25 rpm B-axis: 50 rpm Spindle Maximum speed: 30,000 rpm Spindle taper: HSK-A63 Tool Magazine Number of tool stations: 140 Type: HSK-A63 SCOPE OF SUPPLY Includes (not an exhaustive list): - Grob G552 CNC machining center - Heidenhain TNC 640 - Minimax CO2 high-pressure - Fire suppression system - Knoll KF 600E/2600 - Coolant system - Camfil oil mist separator - Bielomatik central lubrication system - Liquidtool - Probe system - Set of HSK-40 toolholders - Complete operating documentation The exact scope of supply as per photo series Top Offer: GROB G552 Machining Center – As-new Condition & Fully Equipped For sale is a GROB G552 machining center in impeccable condition – used solely for test purposes and therefore virtually as-new. This machine combines the highest precision, reliability, and quality from GROB, and also comes with an exceptionally comprehensive range of optional equipment rarely seen elsewhere. Equipment Highlights: - Minimax CO₂ high-pressure fire suppression system – maximum operational safety - KNOLL KF 600E/2600 coolant system – ensures consistent machining quality even for demanding applications - Camfil oil mist separator – for clean air and a safe working environment - Bielomatik central lubrication system – for optimal maintenance intervals and long service life A rare opportunity for discerning users! Further Advantages: - Machine is installed and fully functional - Inspection under power possible by appointment - Perfectly suited for companies wishing to start production immediately – without compromise on quality or features Conclusion: If you are looking for the very best that GROB machining centers have to offer – in as-new condition and with high-end accessories – this is your opportunity. Please contact us for further information or to arrange a viewing appointment. No liability will be assumed for the accuracy, completeness, or currency of the information provided.

Condition: ready for operation (used), Year of construction: 2020, operating hours: 8,700 h, Control Unit Brand HEIDENHAIN Model TNC 640 Movement X-Axis Movement 800 Y-Axis Movement 950 Z-Axis Movement 1020 Additional Equipment Accessories: Additional pallet + coolant cooling unit This 5-axis GROB G550a universal machining centre was manufactured in 2020. It offers advanced capabilities for complex machining tasks. Consider the opportunity to buy this GROB G550a universal machining centre. Contact us for more information. Iedpoxfw A Djfx Aabebc Application Types Milling

Condition: excellent (used), Year of construction: 2014, Highlights: - Powerful HSK-A 63 Motorizied spindle with 16.000 rpm - A/B Round- Axis re-placed - Manufacturer checked usedmachine Basic machine G350 AB Generation 0 Travel path of the X-axis 600 mm Travel path of the Y'-axis 770 mm Travel path of the Z-axis 805 mm Power supply 400 V, 50 Hz, TN-S Decentralized work area mist collector Work area door, automatic Machine control HEIDENHAIN iTNC 530 Optimizing the machine kinematics with KinematicOpt Collision monitoring DCM Collision (HEIDENHAIN) Tilting table unit (A'-axis) Rotary table with T-slots (B'-axis), Customized coupling system TK57 Ibedpfx Aaoruqp Djboc Motorized spindle HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW Single disk-type tool magazine HSK-A 63 with 34 tool pockets Additional tool magazine TM99 HSK-A 63 with 99 tool pockets Tool cleaning device Electromechanical tool breakage detection device Laser measurement system LaserControl NT A‘=-180°(BLUM) Scraper-type conveyor, discharge height 1,100 mm High-pressure cutting fluid system (38 bar, ICS) Compressed air feed through spindle center Changeable cutting fluid pressure increase Oil skimmer for cutting fluid care Air gun at the work area Flushing gun Rotary distributor in B'-axis rotary table Infrared touch probe m&h Remote machine diagnostics Warranty for Quality Checked Used Machine, 3 month

Condition: excellent (used), Year of construction: 2015, operating hours: 15,000 h, machine/vehicle number: GM4638/01-01, Used CNC horizontal machining center Ibedpfx Aeq Ebbdjabsc Manufacturer: GROB Type: Truck rear axle machining center

Condition: used, Year of construction: 2002, Technical details: spindle speed:: max. 12000 tool taper: HSK 80 . b-axis: 360 x 0,001 ° worktool support (A-axis): ° weight of the machine ca.: 25 500 Kgs. Ibjdpfxewdywds Aaboc x-travel: 800 mm y-travel: 700 mm z-travel: 630 mm dimensions of the machine ca.: 6200 x 3000 x 3200 mm pallet size:: 500 x 500 mm no. of tools in the magazine: 61 Nos. Weight approx.: 23,5 t Horizontal Machining Center with CNC Control System SIEMENS 840 C in well maintained condition. Single spindle *

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: GM 3941/02, In total there are 3 x Grob BZ500 available (Please state your offer price) Sale only within Europe, incl. Turkey Isdpfx Aasmk Utrjbjbc Price without packing; delivery condition: FCA (machine location) ===== Technical data see handout. Any warranty right is excluded. For the correctness of technical data and year of manufacture, for the completeness of accessories and tooling, as well as for the adherence to all safety as well as environmental protection requirements specified in the accident prevention regulations, we do not take over guarantee. No sale to private persons. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: used, Year of construction: 2014, Technical details: x-travel: 800 mm y-travel: 950 mm z-travel: 1020 mm control: Sinumerik 840D sl MDynamics Operate turning speeds: 10.000 1/min Spindle power: 26/20 kW max. torque on the spindle: 340/262 Nm Ibjdpfx Aasxix Atjbjc tool taper: HSK-A 100 tool change unit: 120 (2x60) Pos. Pallet changer 2x: 630 x 630 mm table load capacity: 800 kg weight of the machine ca.: 20 t dimensions of the machine ca.: 3,3 x 6,15 x 3,2 m 6-axis simultaneous horizontal machining center with controlled swivel-rotary table (A/B-axis), Swivel table can swing overhead (180°), that means the part is hanging down overhead and chips don’t accumulate on pallet, they can fall free into the chip conveyor CNC controlled U-axis enables radial movement of tool for variable spindling diamenter. twin pallet changer 630 x 630 mm 6 hydraulic couplings for pallet fixture clamping with rotary joint in A and B-axis special hydraulic pump for fixture coolant through spindle (10-80bar), one channel with proportional valve for pressures 10-200 bar, electromech. tool-length measuring device GROB, BLUM laser for tool measuring, tool coding, chip conveyor, 3D touch probe M&H, el. handwheel Siemens HT8 coolant gun, coolant shower, air gun, oilskimmer, automatic door Remote diagnosis A 6th axis MAPAL Tooltronic U-axis system comes with the machine with two heads: 1. LAT125-HSK100 2. LAT160-HSK100 *

Condition: good (used), Year of construction: 2010, travel distance X-axis: 660 mm, travel distance Y-axis: 775 mm, travel distance Z-axis: 675 mm, Grob G 350 / 5 axles, Year of manufacture 2010, Ibsdstwcpuepfx Aabec Heidenhain iTNC 530 control system, Travel X/Y/Z 660/775/675 mm, 2 axes NC swivel rotary table, Ww 40 times, HSK 63 holder, Spindle speed up to 16,000 rpm, IKZ - internal high-pressure cooling, chip conveyor, interchangeable pallet,

Condition: as good as new (ex-display), Year of construction: 2023, travel distance X-axis: 1,450 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,035 mm, Highlights: - fastest chip-to-chip time in this workspace dimension - Optimum footprint - Automation “ready” _____ Iodpfxstiyzdo Aabjbc G720F machining center X-axis travel = 1450 mm Y-axis travel = 1200 mm Z-axis travel = 1035 mm Interference diameter 1,500 mm (2x) table load 2x 750 kg Work area lighting Machine control Siemens Sinumerik ONE HT10 handheld control unit Motorized spindle 17,000 min-1, 64 Nm GROB spindle diagnosis (GSD) for twin-spindle machines Tool magazine, HSK-A-63 with 80 (2x40) tool pockets Tool loading lift for parallel loading and unloading of tools during machining time mechanic-tactile tool breakage check HSK taper shaft cleaning Air blow-off gun Inspection window for viewing the tool change area/tool robot Lighting in the tool change area/tool robot Minimum quantity lubrication unit for two spindles as single-channel Minimum quantity lubrication unit pressure booster Decentralized exhaust system MQL Scraper conveyor with wear plate Basic installation Clamping functionality Evaluation unit for monitoring support evaluation unit for clamping monitoring - volume flow Preparation for process-related measurement (Renishaw) Renishaw RMP400 extra long measuring probe Loading, directly into the machine by the operator Two-hand operation, incl. automatic opening at the end of the cycle HVO console Preparation for direct loading into the machine by robot Machine status light

Condition: good (used), Year of construction: 2012, Control Heidenhain iTNC 530 Working area: 800 mm x 1020 mm x 970 mm (x/y/z) Table diameter: 630 x 630 mm Table load: 700 kg Workpiece diameter - max.: 900 mm Rotary table (A-/B-axis) A-axis: -185 / +45 ° B-axis: 360 ° Total power requirement: 42 kVA Machine weight approx.: 22 t Chip conveyor Belt filter system - Motor spindle: 16,000 rpm Drive power: 25/35 kw Max. Torque: 160/223 Nm Spindle holder: HSK-A63 Tool changer: 120-position - Measuring probe Ibjdpfxerx N Tze Aabec - Kinematics package - Tool length checking device - BLUM laser measuring system Tool monitoring - electric handwheel - Suction - 80 bar IKZ system

Condition: used, Year of construction: 2009, Technical details: x-travel: 630 mm y-travel: 630 mm z-travel: 500 mm number of spindle speeds: spindle motor: 32 kW size of pallet: 500 x 500 mm b-axis: 36000 x 0,001 ° no. of workpieces in the magazine: 61 Stück tool taper: HSK 63 weight of the machine ca.: 15 t Single-Spindle Ibjdpfswdyyfsx Aaboc Mechanical processing cylinder head VR6 *

Condition: used, Year of construction: 2011, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 1,020 mm, travel distance Z-axis: 1,020 mm, overall weight: 20,000 kg, GROB G550 with Heidenhain iTNC 530 control, used machine, year of manufacture 2011 4/5-axis rotary swivel table with T-slots, 52 kW, 12,000 rpm, 83 Nm, HSK 63 tool holder, tool changer with 60 slots Equipment: safety enclosure/scratch-resistant glass - through-spindle air - grey/blue paintwork - spindle cooler - machine light - chip conveyor - coolant system - internal coolant supply 80 bar - 3D probing system - rinsing/air gun - tool cleaning system - work area extraction - electronic handwheel - remote machine diagnostics preparation - 3D model - Kinematic Opt - collision monitoring DCM - Balluff BIS C - GROB spindle diagnostics GSD The machine can be inspected under power! Ijdpfsw Hx Exex Aabobc

Condition: used, Year of construction: 2014, Technical details: x-travel: 800 mm y-travel: 950 mm z-travel: 1020 mm control: Sinumerik 840D sl MDynamics Operate turning speeds: 10.000 1/min Spindle power: 26/20 kW max. torque on the spindle: 340/262 Nm Ibjdjwr Du Njpfx Aabjc tool taper: HSK-A 100 tool change unit: 120 (2x60) Pos. Pallet changer 2x: 630 x 630 mm table load capacity: 800 kg weight of the machine ca.: 20 t dimensions of the machine ca.: 3,3 x 6,15 x 3,2 m 6-axis simultaneous horizontal machining center with controlled swivel-rotary table (A/B-axis), Swivel table can swing overhead (180°), that means the part is hanging down overhead and chips don’t accumulate on pallet, they can fall free into the chip conveyor CNC controlled U-axis enables radial movement of tool for variable spindling diamenter. twin pallet changer 630 x 630 mm 6 hydraulic couplings for pallet fixture clamping with rotary joint in A and B-axis special hydraulic pump for fixture coolant through spindle (10-80bar), one channel with proportional valve for pressures 10-200 bar, electromech. tool-length measuring device GROB, BLUM laser for tool measuring, tool coding, chip conveyor, 3D touch probe M&H, el. handwheel Siemens HT8 coolant gun, coolant shower, air gun, oilskimmer, automatic door Remote diagnosis KOMET Komtronic U-axis system with two heads: 1. UAS 160-HSK100-E-Z50-1 with 50 mm travel 2. Special UAS 160-HSK100-E-Z-32-1 with 32 mm travel. *

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, Control: Heidenhain TNC 530 X: 600 mm Y: 770 mm Z: 675 mm Spindle speed: 16,000 rpm NC swivel rotary table: 400x400 mm HSK A 63 tool holders Ibodow Eut Aspfx Aabec Renishaw infrared system

Condition: new, Year of construction: 2024, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, Highlights: - Powerfull motorizied spindle 16.000 U/min | 206 Nm - Hydraulic clamping for fixtures - High pressure cutting fluid system (80 bar) _____ Basic machine G440 Travels: X=800, Y=800, Z=800 mm Power supply 400 V, 50 Hz, TN-S Machine cooling system with a air-cooled cooling unit (20 kW) SIEMENS SINUMERIK 840D sl with machine control panel GROB4Pilot access Motorized spindle HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW, oil-air lubrication (GROB) GROB spindle diagnostics GSD Rotary table with GROB pallet clamping system (B-axis) Double disk-type tool magazine HSK-A 63 with 117 (57|60) tool pockets Tool cleaning device Electromechanical tool breakage detection device Pallet change system for two pallets Setup station rotated manually Setup station door, manually-operated, for manual loading/unloading Pallet, 500x500 mm, grid with tapped holes Equipping the pallet with 4 fluid connections Scraper-type conveyor, for larger quantities, discharge height 1,100 mm High-pressure cutting fluid system (10-80 bar, ICS) Compressed air feed through spindle center External compressed air supply via a flexibly adjustable hose Oil skimmer for cutting fluid care Flush gun at the work area Part clamping system in work area - KP1: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) - KP2: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) Part clamping system in setup station of pallet changer Isdpfjr Nbzxsx Aabebc - KP1: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) - KP2: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) - KP3: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) - KP4: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) Preparations for using infrared touch probe OMP60 (RENISHAW) Rotating inspection glass for work area door Remote machine diagnostics with access control switch 12-month warranty

Condition: used, Year of construction: 2016, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 855 mm, travel distance Z-axis: 805 mm, overall weight: 12,500 kg, GROB G351 with EROWA Robot Multi Leonardo for 30 pallets UPC 320x320 and master computer EROWA Manufacturing Control V3 Heidenhain iTNC 530 control, used machine, year of manufacture 2016, commissioning 2017, Rotary swivel table, 4th/5th axis, 32 kW, 16,000 rpm, 206 Nm, HSK 63 tool holder, Tool changer with 34 stations plus 99 in the TM = total 130 tools, Ibjdpow Hxvwofx Aaboc Equipment: safety cabin/scratch-resistant glass – through-spindle air – grey/blue paintwork – machine light – rinsing pistol / blow-off pistol – chip conveyor – coolant system – high-pressure coolant 38 bar – tool cleaning system – 3D measuring probe – work area extraction – Blum laser – remote machine diagnostics – rotary distributor in the B axis – preparation for workpiece clamping system – oil skimmer – GSC swivel axis calibration – DCM collision monitoring – automatic work area door – automation interface The machine can be inspected under power!

Condition: used, Year of construction: 2011, Technical details: x-travel: 800 mm y-travel: 950 mm z-travel: 1020 mm control: Sinumerik 840D sl MDynamics Operate turning speeds: 10.000 1/min Spindle power: 26/20 kW max. torque on the spindle: 340/262 Nm tool taper: HSK-A 100 tool change unit: 120 (2x60) Pos. Pallet changer 2x: 630 x 630 mm table load capacity: 800 kg weight of the machine ca.: 20 t dimensions of the machine ca.: 3,3 x 6,15 x 3,2 m 6-axis simultaneous horizontal machining center with controlled swivel-rotary table (A/B-axis), Swivel table can swing overhead (180°), that means the part is hanging down overhead and chips don’t accumulate on pallet, they can fall free into the chip conveyor CNC controlled U-axis enables radial movement of tool for variable spindling diamenter. twin pallet changer 630 x 630 mm 6 hydraulic couplings for pallet fixture clamping with rotary joint in A and B-axis special hydraulic pump for fixture coolant through spindle (10-80bar), one channel with proportional valve for pressures 10-200 bar, electromech. tool-length measuring device GROB, BLUM laser for tool measuring, tool coding, chip conveyor, Ibedpfx Aajwr Drnjbsc 3D touch probe M&H, el. handwheel Siemens HT8 coolant gun, coolant shower, air gun, oilskimmer, automatic door Remote diagnosis A 6th axis MAPAL Tooltronic U-axis system comes with the machine with two heads: 1. LAT125-HSK100 2. LAT160-HSK100 *

Condition: as good as new (ex-display), Year of construction: 2019, machine/vehicle number: S216405501002, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Highlights: - powerful motor spindle HSK-A 100 with 9,000 rpm - lasermeasurement system BLUM LC-DIGILOG - 46 tools in the system _____ Basic machine G550 access-SERIE Travel path of the X-axis 800.0 mm Travel path of the Y'-axis 950.0 mm Travel path of the Z-axis 1020.0 mm Power supply 400 V, 50 Hz, TN-S Decentralized work area mist collector Stainless-steel internal work area enclosure Fluid cabinet doors SIEMENS SINUMERIK 840D sl with GROB4Pilot access Swivel axis calibration GSC Classic Hand-held controller HT 2 (SIEMENS) SINUMERIK MDynamics technology package - milling Tilting table unit (A'-axis) Rotary table with T-slots (B'-axis) Motorized spindle HSK-A 100, 9,000 rpm, 470/575 Nm, 54/65 kW *spindle new replaced GROB spindle diagnostics GSD Compact double disk-type magazine HSK-A 100 with 46 tool pockets Tool cleaning device Electromechanical tool breakage detection device Blum Lasermeasuringsystem LC50-DIGILOG, A‘=0° High-pressure cutting fluid system (5-40 bar, IKZ) Continuous cooler for cutting fluid with an air cooled cooling unit (13 kW) Compressed air feed through spindle center Oil skimmer for cutting fluid care Air gun at the work area Flush gun at the work area Compressed air cleaner bar for safety screen in work area door Ibedpfx Aasrul U Aoboc Radio touch probe OMP 60 (RENISHAW) machine status lamp 12 month warranty

Condition: used, Year of construction: 2013, Technical details: Ijdpswr Dt Sefx Aabebc x-travel: 800 mm y-travel: 950 mm z-travel: 1020 mm control: Sinumerik 840D sl MDynamics Operate turning speeds: 10.000 1/min Spindle power: 26/20 kW max. torque on the spindle: 340/262 Nm tool taper: HSK-A 100 tool change unit: 120 (2x60) Pos. Pallet changer 2x: 630 x 630 mm table load capacity: 800 kg weight of the machine ca.: 20 t dimensions of the machine ca.: 3,3 x 6,15 x 3,2 m 6-axis simultaneous horizontal machining center with controlled swivel-rotary table (A/B-axis), Swivel table can swing overhead (180°), that means the part is hanging down overhead and chips don’t accumulate on pallet, they can fall free into the chip conveyor CNC controlled U-axis enables radial movement of tool for variable spindling diamenter. twin pallet changer 630 x 630 mm 6 hydraulic couplings for pallet fixture clamping with rotary joint in A and B-axis special hydraulic pump for fixture coolant through spindle (10-80bar), one channel with proportional valve for pressures 10-200 bar, electromech. tool-length measuring device GROB, BLUM laser for tool measuring, tool coding, chip conveyor, 3D touch probe M&H, el. handwheel Siemens HT8 coolant gun, coolant shower, air gun, oilskimmer, automatic door Remote diagnosis KOMET Komtronic U-axis system with two heads: 1. UAS 160-HSK100-E-Z50-1 with 50 mm travel 2. Special UAS 160-HSK100-E-Z-32-1 with 32 mm travel. *

Year of construction: 2021, condition: as good as new (ex-display), Highlights: - Powerfull motorizied spindle 16.000 U/min | 206 Nm - Hydraulic clapming for fixtures - Latest Machine Generation Basic machine G640 Work area travel range: X = 1.050 mm, Y = 800 mm, Z = 1.050 mm Power supply 400 V, 50 Hz, TN-S Ibsdpfxslaugae Aabjc Decentralized work area mist collector Machine cooling system with an air-cooled cooling unit Machine control series FANUC 31i-MODEL B Plus Cycle package for measuring probes (RENISHAW) Control panel to enter tool data at tool loading and unloading position Rotary table with GROB pallet clamping system (B-axis) Motorized spindle HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW, oil-air lubrication GROB spindle diagnostics GSD Single disc-type magazine HSK-A 63 with 50 pockets Tool cleaning device Electromechanical tool breakage detection device Twin palette changer Setup station driven by a three-phase servomotor Setup station door, manually-operated, for manual loading/unloading Additional control panel Pallet 630 x 630 mm, T-slots Equipping the pallet with 12 fluid connections Scraper-type conveyor, discharge height 1,100 mm High-pressure cutting fluid system (23 bar, ICS) Compressed air feed through spindle center External compressed air supply via a flexibly adjustable hose Cutting fluid recirculation on the weekend Flush gun at the work area Air gun at the work area Part clamping system in work area, customer-specific Hydraulic power unit for the part clamping system KP1: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP2: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP3: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP4: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP5: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) KP6: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) Cooling unit for hydraulic proportional valves Part clamping system in setup station of pallet changer, customer-specific KP1: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP2: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP3: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP4: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP5: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) KP6: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) KP7: Compressed air, seating check system (P2.1) KP8: Compressed air, seating check system (P2.1) KP8: Compressed air, seating check system (P2.1) KP10: Compressed air, seating check system (P2.1) KP11: Compressed air, manual pressure regulation, 0.5-5 bar (P1.1) KP12: Compressed air, manual pressure regulation, 0.5-5 bar (P1.1) Touch probe Renishaw RMP60 12-month warranty

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: U220633501233, travel distance X-axis: 600 mm, travel distance Y-axis: 770 mm, travel distance Z-axis: 805 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D sl, spindle speed (max.): 16,000 rpm, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Highlights: - Powerful HSK-A 63 Motorizied spindle with 16.000 rpm - A/B Round- Axis re-placed - Manufacturer checked usedmachine ___ Basic machine G350 AB Generation 0 Travel path of the X-axis 600 mm Travel path of the Y'-axis 770 mm Travel path of the Z-axis 805 mm Power supply 400 V, 50 Hz, TN-S Decentralized work area mist collector Machine control SIEMENS SINUMERIK 840D sl Standard interface 1.7 (GROB) Machine protection system CMS 100 (BRANKAMP/MARPOSS) Zyklus 996 Tilting table unit (A'-axis) Rotary table with pallet clamping system GROB (B’-axis, PW) Motorized spindle HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW GROB spindle diagnostic GSD Single disk-type tool magazine HSK-A 63 with 34 tool pockets Additional tool magazine TM171 with 171 tools Tool cleaning device Tool coding system BIS-C (BALLUFF) Electromechanical tool breakage detection device Pallet change system for 2 400 x 400 mm pallets Setup station doo, automatic, for automatic load and unload systems Scraper-type conveyor, discharge height 1,100 mm High-pressure cutting fluid system (38 bar, ICS) Compressed air feed through spindle center Oil skimmer for cutting fluid care Flushing unit for the base of the work area Ibjdpfsw Ev Rvox Aabsc Air gun at the work area Flushing gun part clamping system in the work area  KP1: Pressure oil, manual pressure reduction, 30-200 bar (H1)  KP2: Pressure oil, manual pressure reduction, 30-200 bar (H1)  KP3: Pressure oil, manual pressure reduction, 30-200 bar (H1)  KP4: Pressure oil, manual pressure reduction, 30-200 bar (H1) Part clamping system in the setup station  KP1: Pressure oil, manual pressure reduction, 30-200 bar (H1)  KP2: Pressure oil, manual pressure reduction, 30-200 bar (H1)  KP3: Pressure oil, manual pressure reduction, 30-200 bar (H1)  KP4: Pressure oil, manual pressure reduction, 30-200 bar (H1)  KP5: Compressed air, manual pressure regulation, 0.5-5 bar (P1)  KP6: Compressed air, manual pressure regulation, 0.5-5 bar (P1) Infrared touch probe m&h Machine status light Remote machine diagnostics, without access control switch Warranty for Quality Checked Used Machine, 3 month

Condition: new, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, Highlights: - Powerfull motorizied spindle 16.000 U/min | 206 Nm - 227 tools in the magazin - High pressure cutting fluid system (80 bar) _____ Basic machine G440 Travels: X=800, Y=800, Z=800 mm Power supply 400 V, 50 Hz, TN-S Machine cooling system with a air-cooled cooling unit (20 kW) Iedpfxst Hrz Ds Aabsbc SIEMENS SINUMERIK 840D sl with machine control panel GROB4Pilot access Motorized spindle HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW, oil-air lubrication (GROB) GROB spindle diagnostics GSD Rotary table with GROB pallet clamping system (B-axis) Double disk-type tool magazine HSK-A 63 with 227 (47+10|50|60|60) tool pockets Tool cleaning device Electromechanical tool breakage detection device Pallet change system for two pallets Setup station rotated manually Setup station door, manually-operated, for manual loading/unloading Pallet, 500x500 mm, grid with tapped holes Equipping the pallet with 4 fluid connections Scraper-type conveyor, for larger quantities, discharge height 1,100 mm High-pressure cutting fluid system (10-80 bar, ICS) Compressed air feed through spindle center External compressed air supply via a flexibly adjustable hose Oil skimmer for cutting fluid care Flush gun at the work area Part clamping system in work area - KP1: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) - KP2: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) Part clamping system in setup station of pallet changer - KP1: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) - KP2: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) - KP3: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) - KP4: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) Preparations for using infrared touch probe OMP60 (RENISHAW) Rotating inspection glass for work area door Remote machine diagnostics with access control switch 12-month warranty