Used Gross Gaz 62 for sale (28)

Condition: excellent (used), CATALOG NUMBER 7594 Technical data: - Feed hopper inlet: 620x800mm - Outlet for shredded wood: 160mm diameter - Rotor working width: 620mm - Main motor: 18.5kW - Pump motor: 0.75kW - Number of knives: 30 pcs - Knife dimensions: 30x30mm - Screen: 12mm/15mm - Pressure drawer - Auto-reverse - Dimensions (L/W/H): 1750x1220x1650mm - Weight: 1020kg ADVANTAGES – German-made – Original DTR documentation – Auto-reverse – Pressure drawer – Very good condition Dedpfx Adov R Tndokowc – Used chipper Net price: 39,900 PLN Net price: 9,388 EUR based on rate 4.25 EUR (Prices may change with increased fluctuations)

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Features and technical data: Feed opening: 600 x 800 mm Hopper capacity: 0.6 m³ V-rotor Rotor diameter: 252 mm Rotor working width: 600 mm Rotor speed: 60 – 100 rpm Cutting system: 28 knives 40 x 40 mm Screen perforation: 15/20 mm Control: electronic via PLC Control cabinet: fully wired, incl. 5 m cable Motor power: 18.5 kW Connection voltage: 400 V +/- 5% / 50 Hz Extraction nozzle diameter: 160 mm Dimensions approx.: L = 1,800 mm, W = 1,230 mm, H = 1,640 mm Weight: approx. 1,300 kg Includes: Automatic star-delta starter Automatic shut-off in idle mode Vibration-damping machine feet Dwodpfxjxavtdj Adkjc CE compliant Availability: short-term Location: Flörsheim

Condition: good (used), Year of construction: 2003, Slow-speed machine with hydraulic walking floor, rotor width 62 cm, motor 18.5 kW, immediately ready for operation Dwedpfjxbrgcjx Adksc

Condition: used, Year of construction: 2000, functionality: fully functional, Gross single-shaft shredder GAZ 62, year of manufacture 2000, 18.5 kW, cutting system with 30 Karo knives, rotor diameter 248 mm, extraction nozzle 160 mm, hopper capacity 0.6 m³, hydraulic push floor, opening 600 x 800 mm, dimensions 1800 x 1200 mm, height 1700 mm, weight 1300 kg. Available approximately from the end of September. Dedpow E Ickofx Adkowc

Year of construction: 2011, condition: ready for operation (used), A Gross Apparatebau GmbH shredder, which was used in the wood industry, is available. Feed opening X/Y: 600mm/800mm, hopper volume: 0.6m³, rotor diameter: 252mm, rotor length: 600mm, rotor speed: 90rpm, drive power: 18.5kW, number of knives: 14, screen perforation: 10mm-40mm, suction nozzle diameter: 160mm, machine dimensions X/Y/Z: approx. 1800mm/1200mm/1650mm, weight: approx. 1300kg, operating hours: 4578h. Documentation available. On-site inspection is possible. Dedsu Nlkxjpfx Adkswc

Condition: new, Voltage: 400 V / 50 HzFeed opening: 600 x 800 mmHopper capacity: 0.6 m³Throughput: material and sieve-dependentRotor diameter: 252 mmRotor length: 600 mmRotor speed: 60 - 100 rpmMotor power: 18.5 kWCutting system: 28 knives 40x40 mm (incl. 2nd row of knives)Sieve perforation: 20/25 mmSuction nozzle: 160 mmDimensions: L = 1.800 mm, W =1,230 mmH = 1,640 mmWeight: approx. 1,300 kgincl.:- automatic star-delta start- electronic control cabinet, fully wired- automatic stop at idle- CE-compliant- GS mark "dust-tested"- vibration-damping machine feet- 2nd row of knives = 14 knives 40x40mm Dsdpfjvyuphsx Adkewc

Condition: reconditioned (used), Year of construction: 2022, functionality: fully functional, power: 18.5 kW (25.15 HP), Feed opening: 600 x 800 mm Hopper capacity: 0.6 m3 Rotor diameter: 252 mm Rotor working width: 600 mm Rotor speed: 60 – 100 rpm Cutting system: 14 blades 40 x 40 mm Screen perforation: 12/15 mm or as desired Control: Electronic via PLC Control cabinet: Fully wired, including 5 m cable Motor power: 18.5 kW Connected load: 400 V +/- 5% / 50 Hz Suction nozzle diameter: 160 mm Overall dimensions approx.: L = 1,800 mm, W = 1,230 mm, H = 1,640 mm Dwedpfx Asv Sccysdkec Weight: approx. 1,300 kg Incl.: Automatic star-delta start-up Automatic star-delta start-up Automatic idle shutdown  Vibration-damping machine feet  CE-compliant  GS mark "dust-tested"

Condition: good (used), Year of construction: 2018, operating hours: 1,011 h, functionality: fully functional, Single-shaft shredder GROSS, Model GAZ 82 S, Year of manufacture: 2018 Technical data: Manufacturer: GROSS Apparatebau Model: GAZ 82 S Year of construction: 2018 Operating hours: 1,011 Drive power: 37 kW Feed opening: 800 x 1,200 mm Hopper capacity: 1 m³ Rotor diameter: 368 mm Rotor length: 800 mm Rotor speed: 60–120 rpm Extraction port diameter: 200 mm Dimensions: approx. 2,100 x 1,700 x 1,750 mm (LxWxH) Weight: approx. 2,500 kg Materials: Wood, cardboard, plastic Accessories: Hopper Remarks: The shredder is in good condition. It has been inspected and tested at our facility in 28816 Stuhr. The video is available on our website or YouTube channel. Inspections, including under power, are possible at any time by appointment. On request, we also carry out test runs with your material for a handling fee. Dwodpfew Rcr Nsx Adkec If you have any questions about the machine, we are happy to assist you by phone from Monday to Thursday, 8:00 a.m. to 2:00 p.m. On Fridays, we are available from 8:00 a.m. to 1:00 p.m. Please note: All technical data is based on manufacturer information. We accept no liability for the accuracy of the information provided or for any possible errors. This offer is non-binding, subject to prior sale, and can be withdrawn at any time. Inspections can be arranged by appointment. Sale is ex works, prepaid, without warranty or guarantee.

Condition: refurbished (used), Year of construction: 2012, machine/vehicle number: H10012282, Wood shredder, factory overhauled Cutting unit completely overhauled, new oils and wear parts Power rating: 22 kW Feed opening: 800 x 1200 mm Rotor working width: 820 mm Rotor diameter: 368 mm Rotor type: S-rotor Dwodpsvkgihjfx Adksc Blade size: 40 x 40 mm Number of blades: 42 Screen size: 12/15 PLC controlled Hydraulic tank capacity: 20 l

Condition: refurbished (used), Year of construction: 2000, machine/vehicle number: H1654, Ready for delivery Djdpfx Adeulfclekjwc Gearbox replaced, cutting unit completely overhauled, new oils and wear parts Connected load: 22 kW Feed opening: 800 x 1200 mm Rotor working width: 820 mm Rotor diameter: 348 mm Rotor type: G-rotor Blade size: 35 x 35 mm Number of blades: 40 blades Sieve size not yet determined PLC controlled Hydraulic tank size: 20 l

Condition: used, Year of construction: 2000, Flotation tank. - Designed for cooling with ammonia (can also be cooled with glycol), 1 x frame cooling. - Stainless steel - insulated - Stand frame, short -Cleaning air fitting with vacuum valve and safety valve Capacity: 431 hl Operating pressure: 4 bar Material: Stainless steel 1.4301 Position: vertical Dwedpfx Aoxbqg Isdkoc Base construction: short supporting skirt Features: Cooling: 1 x side wall cooling jacket; swivel opening with outlet; sampling valve; insulation; dearation and cleaning combination with 2 safety valves; temperature measurement; volume measuerment

Condition: used, Year of construction: 2013, Price: On request - Main motor power [kW]: 30 - Rotor width [mm]: 2500 - Number of shafts [pcs.]: 1 - Opening width [mm]: 3000 - Opening length [mm]: 1400 Dwodpfx Adowz Nxxokec - Year: 2013 - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: good (used), Year of construction: 1999, Briquetting press type GP 120 Tandem Briquetting press for briquetting chips, wood chips and dust incl. automatic fill level indicator - Briquette diameter: 60 mm - Pressing capacity: 40 - 120 kg/h * 2 = 80 - 240 kg/h (depending on material) - Hopper opening: approx. 1,900 x 1,900 mm - Hopper height: approx. 1,800 mm - Hopper capacity: approx. 6.0 m³ - Drive power: 7.5 kW, 400 V, 50 Hz - Switch cabinet: available on both sides - Operating hours: 13,725 h or 13,005 h - Hydraulic unit: approx. 300 litre tank for hydraulic oil - Weight: approx. 1,100 kg * 2 = 2,200 kg Dwodpfsupwx Hsx Adkoc Used briquetting press in good condition W tong cylinder, tongs (RB 120 reinforced), tong connection flange renewed on one side (left in conveying direction) briquetting | briquette press | briquetting presses | briquette press | briquetting

Condition: good (used), Year of construction: 2002, saw blade diameter: 425 mm, cutting range round steel at 90°: 145 mm, total length: 1,200 mm, total height: 1,800 mm, total width: 900 mm, overall weight: 1,000 kg, Sawblade: ø 425 mm Sawcapacity: 145 mm round, 120 mm square Saw mitre: 45º left/right Sawspeed: 18 / 36 m/min. Autom. length stop: MPS, type 4010, 8 meter long Featured with: - Half automatic Djdpfsunhl Isx Adkjwc - Hydraulic clamping - Variabele sawing feed Country of origin: Germany Motor power: 5,5 kW Machine weight: 1000 kg Machine LxWxH: 120 x 90 x 180 cm

Condition: ready for operation (used), Year of construction: 2015, Briquette Diameter: 40 mm Power: 4,1 kW Press Output per hour: 30 kg/h depended on material Hopper opening: 900 x 900mm Controlled by PLC Hydraulic tank: 50l Autom. ON/OFF with level alarm Oil temperature sensor Dodpew Ewpgofx Adkowc Transport pipes Used machine in good condition

Condition: good (used), Year of construction: 2012, Cold circular saw type Fritz Gross UCM425 for sale. Includes feed roller conveyor 800 cm, automatic feed, manufacturer MPS type 3257. Discharge roller conveyor 200 cm. Dwjdpewzxcgofx Adkoc The saw and roller conveyors are year of manufacture 2012. The machine is in perfect working condition and ready for immediate use. Technical data: - Feed roller conveyor: 800 cm - Discharge roller conveyor: 200 cm - Weight: approx. 1000 kg - Mitre cutting possible - Saw blade diameter: 425 mm - Cutting diameter: 130 mm - Roller conveyor width: 300 mm Loading by forklift. If you have any questions, please contact us at any time.

Condition: used, Year of construction: 2001, Insulated, cylindroconical stainless steel tanks with three shell cooling zones and one cone cooling zone. Previously used as beer storage tanks. Dodpfxoxbpd Se Adkjwc Additional title: vertical, coolable, insulated stainless steel tanks Gross volume: 30200 l Pressure capacity: 0,99 bar Max. operating temperature: 40 °C Cooling area: 14,45 m2 Length: 2,83 m Width: 2,83 m Height: 7,86 m Weight: 3150 kg Material: stainless steel Position: standing frame Features: insulation, tank fittings

Condition: as good as new (ex-display), Year of construction: 2025, Briquette Diameter: 40 mm Power: 4,1 kW Press Output per hour: 30 kg/h depended on material Hopper opening: 900 x 900mm Controlled by PLC Hydraulic tank: 50l New exhibition machine with 5 operating hours Dwedpevptrtsfx Adksc

Condition: used, Year of construction: 2002, Cylindroconical fermentation and storage tanks with 3 frame cooling zones and cone cooling. The tanks are insulated and clad. Individual sale possible. Additional title: vertical, coolable stainless steel tanks Gross volume: 58890 l Max. overpressure: 2 bar Operating temperature: -10 to 50 °C Total cooling area: 13,3 m2 Length: 3370 mm Width: 3370 mm Height: 11000 mm Material: stainless steel Position: vertical Features: insulation, cladding, cooling jackets (3x frame, 1x cone) Dwodpfx Ajxbn Eujdkoc

Condition: used, Year of construction: 2001, Insulated, cylindroconical stainless steel tanks with two frame cooling zones and cone cooling. Most recently used as a beer storage tank with a usable volume of 150 hl. Additional title: vertical, coolable, insulated stainless steel tanks Gross volume: 15260 l Pressure capacity: 0,99 bar Max. operating temperature: 20 °C Cooling area: 6,95 m2 Length: 2,52 m Width: 2,52 m Weight: 2100 kg Material: stainless steel Dodpfx Adsvu Tvvokjwc Base construction: standing frame Features: insulation, tank fittings

Condition: used, Year of construction: 2001, Additional title: cylindroconical stainless steel tanks Capacity: 2800 l gross Dwsdjw Uu U Depfx Adksc Over pressure: 2 bar Temperature: 10 °C Material: stainless steel Features: separate regulation, pumps, switch cabinet

Condition: used, Year of construction: 1985, Pressurised tank cellar with three upright stainless steel pressure tanks of 207 hl each and with double-seat valve solution on the operating level. All tanks can be cooled. Additional title: 3 pressure tanks Volume per tank: 20700 l Effective cooling surface: 18 m² Max. working overpressure inner tank: 4 bar Dodpfxew Tmqno Adkswc Length: 2,10 m Width: 2,10 m Height: 6,66 m Weight: 1985 kg Material: stainless steel AISI 304 Features: Tank cleaning equipment with spray head, safety valve, pressure gauge, air valve combination; sampler, level indicator with valves, outlet valve, Printed tank books and drawings available Periphery: Inlet & outlet pipework via double-seat valves

Year of construction: 1988, condition: used, Cylindro-conical 965 hl fermentation and storage tank. - coolable, 1 x cone cooling jacket, 3 x side wall cooling jacket - swivel cone - stainless steel - insulated - short supporting skirt - deaeration and cleaning combination with safety valve - vacuum valve 12 tanks, also available individually or in partial quantities. Dwedpfevcqnljx Adksc Additional title: Outdoor tanks for storing fluids; years of manufacture 1988-1991 Capacity: 96450 l Operating pressure: 2 bar Length: approx. 12400 mm Width: approx. 3950 mm Height: approx. 3950 mm Weight: 6220 kg Material: Stainless steel 1.4301 Position: vertical Base construction: short supporting skirt Features: 12 tanks; Cooling: 1 x cone cooling jacket, 3 x side wall cooling jacket; swivel cone; insulation; dearation and cleaning combination; safety valve; vacuum valve; temperature measurement

Year of construction: 1985, condition: used, Pressurised tank cellar with 4 upright 324 hl stainless steel pressure tanks and with double-seat valve solution on the operating level. The tanks are cooled using ice water. Additional title: 4 pressure tanks Diameter/tank: 2550 mm Total height/tank: 7360 mm Cooling surface/tank: 25 m² Perm. working overpressure: 3 bar Systemic volume: 324 hl Length: 12 m Width: 4 m Height: 7,5 m Weight: 2585 kg Material: stainless steel AISI 304 Dwedpfx Aevcqynedkec Features: Tank cleaning equipment with spray head, safety valve, pressure gauge, air valve combination; sampler, level indicator with valves, outlet valve Periphery: Inlet and outlet pipework via double-seat valves

Year of construction: 1995, condition: used, Stainless steel tank. - glycol cooling, 1 x side wall cooling jacket - stainless steel - insulated - short supporting skirt - deaeration and cleaning combination with safety valve Additional title: Outdoor tank for storing fluids Capacity: 744 hl Operating pressure: 0,9 bar Dodpfx Ajvcqdyjdkjwc Width: 12,55 m Height: 3,27 m Material: Stainless steel Position: vertical Base construction: short supporting skirt Features: Cooling: 1 x side wall cooling jacket; insulation; dearation and cleaning combination with safety valve; temperature measurement