Used Wohlhaupter Upa 4 S5 for sale (59,073)

Condition: used, Year of construction: 2013, Number of spindles 5 St. Working width 20 - 230 mm Working height 8 - 120 mm Length of the planing table 2500 mm Feed motor 1,1 kW Feed speed stufenlos regelbar 2-12 m/min. weight of the machine ca. 2500 kg Control MemoryPlus 1 WEINIG VARIOMAT Planing and Moulding Machine ----- Brief Summary: ----- - 5 spindles - Powerful motors - Cycle-controlled jointing - MemoryPlus control system - Option: Stähle-Hess Saturn single-piece sanding machine Technical Manufacturer's Description: ----- Working width: 20 – 230 mm Working height: 8 – 120 mm 1st Spindle: Horizontal Bottom ----- Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 125 – 145 mm Axial adjustment range: 5 mm Rebating device incl. rebating cutters 2nd Spindle: Vertical Right ----- Motor with brake: 11.0 kW Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 93 – 232 mm Minimum tool diameter at fence level: 93 mm Maximum tool diameter behind fence level: 180 mm Maximum moulding depth: 45 mm Axial adjustment range: 30 mm Insert segment incl. additional fence lip: 125 mm Insert segment incl. additional fence lip: 150 mm 3rd Spindle: Vertical Left ----- Shared motor with 1st right spindle Diameter: 40 mm Shared speed with right spindle Tool cutting circle: 93 – 232 mm Maximum moulding depth: 45 mm Minimum moulding depth at 200 mm tool cutting circle: 20 mm Axial adjustment range below table: 30 mm Insert segment: 125 mm Insert segment: 150 mm 4th Spindle: Horizontal Top ----- Motor with brake: 11.0 kW Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 125–200 mm Maximum rebate depth: 30 mm Minimum rebate depth (for tool cutting circle up to 200 mm): 20 mm Axial adjustment travel: 30 mm 5. Horizontal Bottom Spindle ----- Motor with brake: 11.0 kW Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 125–200 mm Maximum rebate depth: 15 mm Axial adjustment travel: 10 mm Table plates with wooden inserts for the bottom spindle Additional outfeed plate above the bottom spindle for wooden inserts Feed System ----- Frequency-controlled feed: 1.1 kW, infinitely variable (2–12 m/min) Double-pendulum roller opposite the left spindle Axial adjustment travel of feed rollers opposite the left spindle: 35 mm Durofer-coated spiked feed rollers Pneumatic pressure for feed rollers (incl. water separator) Cycle-controlled jointing to support manual jointing. The infeed roller is released once the second feed roller has engaged the workpiece. After the workpiece clears the second feed roller, the infeed roller returns to its starting position for the next workpiece. Additional Features: ----- Pedpfxoy Spvfs Alwegt MemorPLUS Control System Width and height adjustment via controls (Spindles 3 and 4: radial CNC-axis controlled) ----- Price for the above-mentioned machine available upon request! ----- OPTIONAL ADD-ON (at extra cost) — Stähle-Hess Saturn #7008: Machine previously used in conjunction with the Stähle-Hess Saturn Duo Single-P...

Condition: reconditioned (used), Number of spindles 6 St. Working width 240 mm Working height 200 mm Length of the planing table 2500 mm Feed speed 6-36 m/min. Dimensions (L/W/H) 4900x1700x2000 mm weight of the machine ca. 3500 kg Control SCM Mobile 10 SCM Superset NT PLUS Comp. 31 for window production ----- The machine is in process of partial reconditionning at our facility at the moment. Highlights: - Machine with 6 spindles (2 with HSK mounting) - Spindle speed 8,300 rpm - Working width 240 mm, working height 200 mm - Electronic horizontal and vertical spindle positioning - PRL equipment for glazing bead separation - Air-cushion table - Touchscreen control Technical Data: Working width: max. 240 mm (kit for min. width 15 to 25 mm) Working height: max. 200 mm Feed speed: infinitely variable 6 to 36 m/min via inverter Infeed table: length 2,500 mm Machine weight: approx. 3,550 kg Dimensions: length 4,900 mm / width 1,700 mm / height 1,700 mm 1st Spindle: _____ First bottom spindle, horizontal (jointer/planer) Motor with brake, 11 kW Diameter: 40 mm Speed: 6,000 rpm 2nd Tool Mount (HSK): _____ First right tool mount, vertical Motor with brake, 7.5 kW Speed: 8,300 rpm HSK 85S quick-change system Electronic vertical and horizontal positioning 3rd Tool Mount (HSK): _____ First left tool mount, vertical Motor with brake, 7.5 kW Speed: 8,300 rpm HSK 85S quick-change system with pneumatic unit Electronic vertical and horizontal positioning Electronic tool diameter adjustment (setup) 4th Spindle: _____ First top spindle, horizontal Motor with Brake 11 kW Speed ??8,300 rpm Electronic horizontal positioning Electronic tool diameter adjustment (setup) 5th Spindle: _____ Second horizontal top spindle Motor with brake 7.5 kW Speed ??8,300 rpm Electronic vertical and horizontal positioning Electronic tool diameter adjustment (setup) 6th Spindle: _____ Second horizontal bottom spindle Motor with brake 7.5 kW Speed ??8,300 rpm Electronic vertical and horizontal positioning Additional technical features: _____ - 2 feed units following the top spindles to reduce the axis spacing from 620 mm to 450 mm (for short workpieces) - Driven, motorized feed roller integrated into the machine table - Pneumatic hold-down pressure before the jointing spindle (can be deactivated from the control panel) - Pneumatic feed deactivation for the final unit following the 2nd bottom spindle; operable even when the sound enclosure is closed - Pneumatic "TTL" pressure elements before the first horizontal top spindle - Air-cushion lubrication in the machine table to minimize friction - Manual lubrication pump for the machine table - Central lubrication system for guideways and controlled axes - 5 x electronic horizontal positioning (positions 2 – 3 – 4 – 5 – 6) - 4 x electronic vertical positioning (positions 2 – 3 – 5 – 6) - 3 x electronic tool diameter adjustment (setup) Positions (3 – 4 – 5) - Mobile 10 control system - PRL equipment (Glazing bead package) for cutting out the glazing bead - Soundproofing and safety enclosure with electromagnetic interlock (CE standard) Pgjdpfxozq Hiqs Alwet Dust ...

Condition: new, Number of spindles 6 St. Working width 15 - 250 mm Working height 10-200 mm Length of the planing table 2000 mm Feed motor 4 kW Feed speed 6-24 m/min. Kuper SWT XL-6 Automatic Planer and Moulder (Window Version with Glazing Bead Separation) ----- - ??Number of spindles: 6 (Bottom, Right, Left, Top, Top, Bottom) - Working width: 15 - 250 mm - Working height: 10 - 200 mm - Spindle speed: Frequency-controlled 4,000 - 8,000 rpm - Feed speed: 6 - 24 m/min, infinitely variable - Feed motor with electronic brake: 4 kW - Equipped for glazing bead separation in window production - Motorized axial and radial spindle adjustment - K2 Comfort Control, Professional - 9" Touchscreen Manufacturer's Description (Summary): ----- 1st Spindle: HORIZONTAL BOTTOM ----- Siemens IE3 motor with inverter brake: 7.5 kW Diameter: 40 mm Spindle length: 275 mm Speed, frequency-controlled: 4,000 - 6,000 rpm Tool cutting circle: 125 - 160 mm Rebating unit: 20–25 mm diameter difference relative to planing head Important: Machine cannot be operated without the jointing/rebating cutter Extraction nozzle: D = 125 mm "Pro-Lock" tool clamping system 2nd Spindle: VERTICAL RIGHT ----- Siemens IE3 motor with inverter brake: 7.5 kW Diameter: 40 mm Spindle length: 176 mm Clamping length (effective length): 170 mm Speed, frequency-controlled: 6,000 - 8,000 rpm Tool cutting circle: 112 - 200 mm Axial adjustment range: 60 mm Table plate adjustable to tool radius Standard profile depth 20 mm Extraction nozzle dia. 125 mm Extraction; individually adjustable chip deflector "Pro-Lock" tool clamping system Motorized radial positioning Motorized axial positioning 3rd Spindle: VERTICAL LEFT: ----- Siemens IE3 motor with inverter brake, 7.5 kW Diameter 40 mm Spindle length 176 mm Clamping length (effective length) 170 mm Speed, frequency-controlled 6,000 – 8,000 rpm Pgodpezrh E Nefx Alwet Tool cutting circle 112 – 200 mm Axial adjustment range 60 mm Standard profile depth 20 mm Table plate adjustable to tool radius Extraction nozzle dia. 125 mm Extraction; individually adjustable chip deflector (chips discharged downwards) "Pro-Lock" tool clamping system Motorized radial positioning Motorized axial positioning 4th Spindle: HORIZONTAL TOP: ----- Siemens IE3 motor with inverter brake, 7.5 kW Diameter 40 mm Spindle length 260 mm Speed, frequency-controlled 6,000 – 8,000 rpm Tool cutting circle 112 – 200 mm Axial adjustment range 20 mm Pneumatic pressure shoe, dynamically adjustable via linear guides Pressure lips in front of the spindle: pneumatically sprung, externally adjustable, with path control Standard profile depth 20 mm Extraction nozzle dia. 125 mm Extraction; individually adjustable chip deflector "Pro-Lock" tool clamping system Motorized radial positioning Motorized axial positioning 5th Spindle: HORIZONTAL TOP: ----- Siemens IE3 motor with inverter brake 7.5 kW Diameter 40 mm Spindle length 260 mm Speed, frequency-controlled 6,000 – 8,000 rpm Tool cutting circle 112 – 200 mm Axial adjustment range 20 mm Standard profile depth 20 mm Extraction nozzle dia. 125 mm Extraction: individually adjustable chip deflector "Pro-Lock" tool clamping system Motorized ...

Condition: ready for operation (used), Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2000 mm Feed motor 4 kW Feed speed 5-24 m/min. WEINIG Unimat 23 E Planer and moulder ----- 6 spindles (with 2 rigth spindles, reinforced motors, 8,000 rpm, ATS control Machine will be cleaned and functionally checked before delivery Working width 20 - 230 mm Working height 8 - 120 mm 1st spindle (bottom) 5.5 kW (motor replaced) ----- Diameter 40 mm Speed ??6,000 rpm Tool swing diameter 125 - 180 mm Rebating unit including tool Hardened table insert in front of 1st (bottom) spindle 2nd spindle (right) 12.1 kW (motor replaced) ----- Shared motor with left vertical spindle Diameter 40 mm Speed ??8,000 rpm Tool swing diameter 112-250 mm Max. Tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 3. Spindle, left ----- Shared motor with 2nd spindle Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-200 mm Max. groove depth 35 mm Axially travel 80 mm Pressure shoe in front of left spindle, including spring-loaded lateral roller pressure 4. Spindle, right 8.3 kW (motor replaced) ----- Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-250 mm Max. tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm Pedjxz Hh Uepfx Alwsgt 5. Spindle, top 7.5 kW ----- Diameter 40 mm Speed ??8,000 rpm Tool travel 112-200 mm Max. groove depth 35 mm Axially travel 45 mm Split pressure shoe in front of upper spindle, adjustable to the tool travel and pivoting away from the tool, spring-loaded. 6. Lower spindle 4.0 kW ----- Diameter 40 mm Speed ??6,000 rpm Tool travel 112-250 mm Max. groove depth 15 mm Axially travel 45 mm Spindles in general ----- All groove spindles with high concentricity. Lubrication points for the axial spindle movement. Feed system ----- Motor with mechanical brake, 4 kW Mechanical feed infinitely variable 5-24 m/min. Feed roller in front of the first lower tool pneumatically controlled up/down, Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning Adjustment travel of the feed rollers relative to the left spindle, axial 35 mm Machine electrical system ----- Operating voltage 440 V (voltage range 380 - 420 V), 50 Hz. Machine frame, tables and stops ----- Infeed table 2.0 m long (incl. jointing guide) Manual Waxilit pump for table de-resin removal One driven rubber roller (spring-loaded in the outfeed table) Two driven rollers in the machine table, hardened Machine operation ----- Pressure shoe in front of the upper spindle with mechanical digital display. Extraction after the upper spindle with mechanical digital display. ATS/System, automatic 2-axis positioning for spindles 3 and 5 Minimum working height 12 mm Electric height adjustment of the upper spindles and the feed Central lubrication points on the front of the machine Electronic digital displays on spindles 3 and 5 (axial), spindle 6 (radial) and spindle 4 (axial and radial) Safety and noise reduction ----- Full safety enclosure Easily hinged safety hood with window. Covers the ent...

Condition: new, Dimensions (L,W) , mm Weight ca. 90 kg adjustable height (yes/no) ja Pgsdpfxjvu Hfdo Alwot stroke 300 - 800 mm surface of working table 1.700 x 1.500 mm table width max. 3.800 mm 0 ca. 130 kg Ruchser RU-4-SSP rotary-tilt table ----- Support surface 1700 x 1500 mm, maximum Table width swung out 3800 mm, pneumatically tiltable, weatherproof recess, with 6 storage boxes, each with 2 compartments, pull-outs below for widening, with 2 support feet and 2 flat clamping cylinders, Lifting device from 300 - 800 mm, Roller conveyor as a surface, foldable. Payload capacity 130kg. Driving device with 4 swivel castors Stop device (RU-4SSP) 2 stops for final inspection and To seal Wing assembly device with tool tray and adjustable stop for Inclination for RU-4-SSP Holder for drill, screwdriver gun etc. with screwdriver quiver Driving device with flanged rollers RU-DKFA and RU-4SSP 3 double meter rail for Driving device 25 x 10 mm ----- Price of the above machine on request! plus packaging and shipping ----- (technical data according to manufacturer - no guarantee!)

Condition: new, Number of spindles 4 St. Psdeyhq Ugspfx Alwjgt Working width 15 - 230 mm Working height 10 - 125 mm Feed speed 6 - 24 m/min.

Condition: reconditioned (used), Number of spindles 5 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. Control Memory-Funktion Weinig Powermat 400 with HSK/Powerlock, axial/radial CNC controlled ----- This machine is currently being refurbished at our facility! Pictures taken before dismantling and currently during the processing phase! Brief Summary: ----- - 5 spindles with 8,000 rpm - 4 x HSK/Powerlock - Axially and radial CNC adjustments of the spindles via control - CNC-controlled adjustment and positioning of the feed - Table tops with guide blades at spindles 2 and 3. - Includes Weinig/Neumann RF 15 return conveyor system Detailed Description: ----- Technical Data: Working width: 20-230 mm Working height: 8-120 mm 1st tool holder - bottom ----- Motor with brake: 5.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter: 93 - 145 mm Axially travel: 5 mm Folding device MarathonCoatin for table insert in front of 1st lower Tool Holder 2nd Tool Holder - PowerLock - Right ----- Motor with brake: 7.5 kW Shared motor with left tool holder Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter 40 mm below table level: 93 - 200 mm Tool swing diameter 55 mm below table level: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. tool diameter behind stop plane: 180 mm Max. groove depth: 35 mm Axially travel: 55 mm Spindle: CNC controlled axially Table tops with guide blades 3rd Tool Holder - PowerLock - Left ----- Motor with brake: Shared motor with the 2nd spindle Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter 40 mm below table level: 93 - 180 mm Table surface: 93 - 200 mm Tool swing diameter 55 mm below table surface: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. groove depth: 35 mm Axially travel: 55 mm Spindle axially and radially CNC controlled Table tops with guide blades 4. Tool holder - PowerLock - top ----- Motor with brake: 7.5 kW Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter: 93 - 200 mm Tool swing diameter for straight cutter heads max.: 180 mm Max. groove depth: 35 mm Axially travel: 40 mm Split pressure shoe in front of upper tool holder, adjustable and pivoting away from the tool, spring-loaded. Pressure shoe in front of, and discharge after, the upper tool holder with electronic digital displays, integrated into memory functions CNC-controlled radial spindle 5. Tool holder - PowerLock - bottom ----- Motor with brake: 7.5 kW Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter: 93 - 200 mm Max. throat depth: 15 mm Axially travel: 35 mm Pgjdpfeyy A Iqjx Alwot Feed system ----- Frequency-controlled feed, infinitely variable with brake: 4 kW, 5 - 30 m/min Infeed roller in front of the first lower tool, pneumatically controlled up/down. Durofer pointed tooth rollers (Weinig patent) wi...

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 3,009 h, load capacity: 4,500 kg, lifting height: 5,580 mm, free lift: 1,700 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 2,770 mm, gearing type: hydrostat, fork length: 1,270 mm, front tire type: superelastic tires (non-marking), front tire size: 200/50-10, rear tire type: superelastic tires (non-marking), rear tire size: 27x10-12, empty load weight: 6,800 kg, total height: 2,620 mm, total length: 2,460 mm, total width: 2,260 mm, maximum load weight: 4,500 kg, fuel: electricity, Equipment: 3rd hydraulic function, 4th hydraulic function, CE marking, adjustable boom, cabin, hydraulic fork positioner, lighting, pallet forks, sideshift, The Combilift is in very good condition. Psdpfjz Ezyqjx Alwegt It features side shift and fork positioner. The mast is a triplex type with free lift. We sell forklifts after a complete service. They are prepared for the end user. They are ready for immediate use. We can arrange transport within Europe and worldwide.

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 1,116 h, load capacity: 4,500 kg, lifting height: 5,500 mm, free lift: 1,700 mm, load center: 600 mm, fuel type: diesel, mast type: triplex, construction height: 3,550 mm, fork length: 1,200 mm, front tire type: superelastic tires (black), rear tire type: superelastic tires (black), empty load weight: 7,240 kg, total height: 2,900 mm, total length: 2,550 mm, total width: 2,250 mm, maximum load weight: 4,500 kg, fuel: liquid petroleum gas (LPG), Equipment: 3rd hydraulic function, 4th hydraulic function, adjustable boom, cabin, lighting, pallet forks, The Hubtex is in perfect condition. It has only 1116 operating hours. Pgodpfoz Etyvjx Alwot We sell forklifts after they have undergone a complete service. They are prepared for the end user. They are ready for immediate use. We can arrange transport within Europe and worldwide.

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 16,312 h, load capacity: 8,000 kg, lifting height: 6,840 mm, free lift: 2,260 mm, fuel type: electric, mast type: triplex, construction height: 3,510 mm, fork carriage width: 2,050 mm, fork length: 2,000 mm, empty load weight: 12,501 kg, total length: 3,950 mm, drive type: Elektro, construction width: 2,050 mm, Electric 4-wheel forklift Load center: 600 Fork width: 150 mm Fork thickness: 60 mm Pjdjz Evqqopfx Alwsgt Mast type: Triplex Condition: Ready for use and fully functional Technical condition: very good Front tire type: Pneumatic Front tire size: 8.25-15 Rear tire type: Pneumatic Rear tire size: 8.25-15 Battery voltage: 80V Battery Ah: 1720Ah Battery year of manufacture: 2018 Description: In addition to this Kalmar model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Lease purchase and financing at favorable terms are always possible for us. We would also be happy to buy your used forklift outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this ECG80-6. P.S.: Our forklift master workshop specializes in repair, refurbishment, overhaul, and custom modifications for forklifts from 8 tons upwards. We would also be happy to display your vehicle for consignment sale at our facility. Side shift, fork positioner, Heater, full cabin, full free lift, Rotating seat

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 11,114 h, load capacity: 2,000 kg, lifting height: 3,340 mm, fuel type: electric, mast type: simplex, construction height: 2,140 mm, fork carriage width: 980 mm, fork length: 1,100 mm, empty load weight: 3,555 kg, total length: 2,140 mm, drive type: Elektro, construction width: 1,100 mm, Electric four-wheel forklift Load center: 500 Fork width: 100 mm Fork thickness: 40 mm Mast type: Standard Condition: Ready for use and fully functional Pgodpez Evtxefx Alwst Technical condition: very good Front tire type: Superelastic Front tire size: 200/50-10 Rear tire type: Superelastic Rear tire size: 150/75-8 Battery voltage: 48V Battery Ah: 750Ah Battery year of manufacture: 2015 Description: In addition to this Jungheinrich model, we have approximately 200 heavy-duty forklifts, compact forklifts, and reach trucks in our Hamburg and Gdansk warehouses. Visit our website - sago-online. Lease-to-own and financing options are available at favorable terms. We are also happy to buy your used forklifts outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this EFG320. P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and custom modifications for forklifts from 8 tons upwards. We also offer commission sales for your vehicles. Side shifter, Telescopic forks

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 2,200 h, load capacity: 4,000 kg, lifting height: 4,520 mm, free lift: 1,520 mm, fuel type: diesel, mast type: triplex, construction height: 2,540 mm, fork carriage width: 1,200 mm, fork length: 1,600 mm, empty load weight: 7,500 kg, total length: 3,620 mm, drive type: Diesel, construction width: 2,240 mm, Rough terrain forklift Fork width: 125 mm Fork thickness: 50 mm Mast type: Triplex Pgedpfoz Evt Esx Alwot Condition: Ready for use and fully functional Technical condition: very good Front tire type: Pneumatic Front tire size: 16.5/85-24 Rear tire type: Pneumatic Rear tire size: 12.5-18 Description: In addition to this JCB model, we have approximately 200 heavy-duty forklifts, compact forklifts, reach trucks, and side loaders in our Hamburg and Gdansk warehouses. Visit our website - sago-online. Lease-purchase and financing at favorable terms are always possible for us. We would also be happy to buy your used forklift, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed information about this 940-4 T4. P.S.: Our forklift master workshop specializes in the repair, maintenance, overhaul, and custom fabrication of forklifts from 8 tons upwards. We would also be happy to offer your vehicle for sale on consignment. Side shifter, Heater, full cabin, full free lift, 4x4

Condition: new, Year of construction: 2023, load capacity: 3,000 kg, lifting height: 4,750 mm, total length: 5,100 mm, · Hersteller Manitou · Modellname MC 30-4 ST5 Pgodpexd Hvqsfx Alwjt · Antriebsart Diesel · Bedienertyp Sitzen · Max. Tragkraft 3000 kg · Lastschwerpunkt 500 mm · Lastabstand, Mitte der Antriebsachse bis zur Gabel 626 mm · Standard mast reference of the machine FVD 33 · Vorderachslast (beladen) / Hinterachslast (beladen) 6650 kg / 790 kg · Bereifung Pneumatisch · Reifengröße, vorn 12,5/80-18/12 SL R4 · Reifengröße, hinten 27x10-12 SKS · Anzahl der Vorderräder / Hinterräder 2 / 2 · Anzahl der Antriebsräder 4 · Vorderspur 1159 mm · Abstand zwischen den Hinterrädern 1176 mm · Höhe Schutzdach (Kabine) / Gesamthöhe mit niedrigem Fahrerschutzdach (Buggie-Ausführung) 2155 mm / 1990 mm · Sitzhöhe 1094 mm · Gabelträger DIN 15173 A/B 3A · Gang· breite für Palette 1000 x 1200 quer 5461 mm · Wenderadius 3435 mm · Fahrgeschwindigkeit (beladen / unbeladen) 12 km/h / 24.50 km/h · Hubgeschwindigkeit (beladen / unbeladen) 0.47 m/s / 0.46 m/s · Absenkgeschwindigkeit (beladen / unbeladen) 0.50 m/s / 0.30 m/s · Zugkraft 3100 daN · Steigfähigkeit – beladen 46 % · Festellbremse Hydraulik bremst durch Druckverlust · Nennleistung Verbrennungsmotor 37 kW · Hersteller / Motor Modell / Motornorm Kubota / D1803 CRT E5B / Stage V · Nenndrehzahl 2700 rpm · Anzahl der Zylinder / Tragfähigkeit der Zylinder 3 - 1826 cm³ · Steuerung Elektronisch · Ölmenge für Anbaugerät 42 l/min · Geräuschpegel am Ohr des Fahrers gemäß DIN 12 053 79 dB

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 3,403 h, load capacity: 3,000 kg, lifting height: 5,000 mm, free lift: 1,550 mm, fuel type: electric, mast type: triplex, construction height: 2,350 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Automatic Condition: Refurbished, without warranty Technical condition: very good Front tire type: Non-marking Psdpsz Dycusfx Alwsgt Front tire condition: 80 - 100% Rear tire type: Non-marking Rear tire condition: 80 - 100% Battery voltage: 80V Battery type: PzS Battery year of manufacture: 2020 Description: Price includes a new UVV inspection. A new paint job can be purchased for an additional EUR 1,000.00 net (takes approximately 2-3 weeks as it is outsourced). The battery will be regenerated using a power cycler, including a Kappa test. Charger included, with matching plug. We would be happy to arrange cost-effective transportation for you. A lease-purchase option is generally available. We are an official Jungheinrich partner. Fork, side shifter, 3rd valve, 4th valve, rear work light, front work light, roof protection, windshield, full free lift, CE certificate, safety light.

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 400 mm, workpiece weight (max.): 2,000 kg, quill stroke: 400 mm, distance table to quill: 215 mm, workpiece length (max.): 920 mm, workpiece width (max.): 550 mm, workpiece height (max.): 550 mm, overall weight: 4,000 kg, Sinker EDM machine GF AgieCharmilles Spirit 4 Year of manufacture: 2008 Travel ranges (X/Y/Z): 700 x 500 x 400 mm Max. workpiece dimensions: 920 x 550 x 370 mm Max. workpiece weight: 2000 kg Distance table - quill: 215 - 615 mm Bath level up to 415 mm Includes pneumatic chuck of the 3R system or Erowa ITS 50 (customer’s choice) Includes 15-position electrode changer in magazine Max. electrode weight: 80 kg Includes C-axis with U = 0-40 rpm Total weight (without dielectric fluid): 4000 kg Dimensions: 3000 x 3000 x 2865 mm Pedpez D Apdefx Alwogt After receiving your order, the machine will be cleaned, serviced, and tested by us. We would be pleased to offer you the following additional services and products: - Commissioning - Transportation - Training - Clamping devices - Dielectric fluid - Cooling unit

Condition: good (used), electric motor, three-phase motor -Manufacturer: Wap, electric motor type AP 100L-4 -Power: 3.7 kW -Speed: 1440 rpm -Shaft: Ø 28 x 60 mm Pedpjz D Sp Tofx Alwogt -Design: B3 -Protection class: IP 45 -Dimensions: 385/198/H240 mm -Weight: 32.1 kg

Condition: like new (used), Threading jaws R 2 to GA 4 Pgedpfx Aeivzckjlwot Threading jaws for Georg Fischer GA 4 threading machine as new GF Art. 012209

Condition: good (used), Thread tap G 1 1/4 inch Psdpfsdx Uzdex Alwjgt L. 110 mm

Condition: good (used), Whitworth thread tap, manufactured by Reishauer. Type: Whitworth 01 W 1 3/4 inch Pgsdpsdx Ug Hofx Alwst HSS (High-Speed Steel)

Condition: ready for operation (used), Year of construction: 2001, spindle speed (max.): 4,000 rpm, controller manufacturer: HEIDENHAIN, controller model: TNC 124, number of axes: 3, This 3-axis KUNZMANN WF 4/3 was manufactured in 2001. It features a vertical spindle with a swiveling head, CNC-controlled X, Y, and Z axes, and a spindle taper of SK40. The spindle speed ranges from 0 to 4,000 rpm with rapid traverse rates up to 1,000 mm/min on all axes. Consider the opportunity to buy this KUNZMANN WF 4/3 universal machining centre. Contact us for more information about this machine. • Swivel head: ±90° • Spindle & drives (INDRAMAT): • Main spindle motor: 2AD104C-B050A1-CS06-A2N1 • Spindle taper: SK40 • Spindle bore: 22 mm • Quill diameter: 90 mm • Quill stroke: 60 mm • Axis drives: • X / Y / Z motor type: MKD071B-061-GG1-KN • Speed & feed: • Spindle speeds: • Range I: 0–1,000 rpm (stepped) • Range II: 1,001–4,000 rpm (stepless) • Rapid traverse: • X-axis: up to 1,000 mm/min • Y-axis: up to 1,000 mm/min • Z-axis: up to 1,000 mm/min • Feed force (X/Y/Z): approx. 4 kN • Electrical & control (INDRAMAT): • Power supply modules: • Net filter: NFD03.1-480-030 • Capacitor module: CZM01.3-02-07 • Controllers: • Spindle controller: DKC11.3-100-7-FW • Axis controller: DKC01.3-040-7-FW • Firmware versions: • Spindle: ESM 2.1-SMT-02V • Axes: ESM 2.1-SMT-02V Pgodpsya D Svjfx Alwet Technical Specification Taper Size SK 40

Condition: good (used), mileage: 1,64,000 km, power: 249 kW (338.55 HP), first registration: 11/2017, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 6x2, wheelbase: 4,600 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: semi-automatic, emission class: euro6, suspension: air, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, Year of construction: 2017, Equipment: AdBlue, Bluetooth, air conditioning, airbag, central locking, crane, cruise control, differential lock, electric window regulation, trailer coupling, = Additional Options and Accessories = - Aluminum fuel tank - Rear work lights - Brake booster - High beam headlights - Power Take-Off (PTO) - Rear view camera - Stability control = Notes = Volvo FM420, 6x2*4, Euro 6, 158,750 km, tipper with loading crane, well-maintained and in excellent condition! Further information: Engine: 420 hp Transmission: Automatic Suspension: Air/Air Mileage: 158,750 km Model year: 2017 First registration: 04/21/2017 Wheelbase: 4600 mm Emission class: Euro 6 Air conditioning, Webasto (auxiliary heater), engine preheating Axle configuration: 6x2 (3rd axle can be lifted and steered) Snowplow mounting plate (Mählers) Connection (quick coupling) for Schmidt spreader No warning lights active! Extras: Rear view camera, Alcolock (alcohol interlock), etc. Next main inspection: 04/27/2026 Last maintenance: Will be delivered with fresh maintenance. The truck is in good, fully functional condition; no active faults or warning messages. Body: Tipper body (Zetterbergs) (operation from both the cab and via remote control). Last maintenance: 06/2025 Crane: HIAB X-HiPro 232 E-6, 6 hydraulic extensions, hose/line set, year of manufacture 2018, remote control... all in good, fully functional condition!! Note: Only 1,000 operating hours Optionally available: 1) Grapple bucket with rotator Overall rating: General rating (1-5): 4.5 Front tire condition: 90% Rear tire condition: 60% = Further information = Technical information Engine displacement: 12,777 cc Axle configuration Brakes: Disc brakes Pgedpfsz Dwa Dox Alwjt Suspension: Air suspension Front axle: Tire size: 385/65R22.5; Max. axle load: 9000 kg; Steered; Tire tread depth left: 90%; Tire tread depth right: 90% Rear axle 1: Tire size: 315/80R22.5; Twin tires; Differential lock; Max. axle load: 11500 kg; Tire tread depth left inner: 60%; Tire tread depth left outer: 60%; Tire tread depth right inner: 60%; Tire tread depth right outer: 60% Rear axle 2: Tire size: 385/65R22.5; Lift axle; Max. axle load: 7500 kg; Steered; Tire tread depth left: 60%; Tire tread depth right: 60% Functional Lifting capacity: 5,400 kg Lifting height: 1,950 cm Crane: HIAB X-HiPro 211 E-6, year of manufacture 2016, behind the cab Maintenance, history and condition APK (Technical Main Inspection): valid until 01/2027 Technical condition: good Optical condition: good

Condition: excellent (used), Huber Unichiller UC055Tw spec. – water-cooled recirculating chiller Manufacturer: Peter Huber Kältemaschinenbau GmbH Model: Unichiller 055Tw spec. Type: UC055Tw spec. Machine type: Recirculating chiller / temperature control unit / process chiller Temperature range: -10 to +40 °C Offered is a used Huber Unichiller UC055Tw spec. with a water-cooled refrigeration unit. The unit is designed for temperature control and process cooling of external closed circuits. Operation is via the Huber Compatible Control system. Technical data: Temperature range: -10 to +40 °C Power connection: 400 V / 3~ N / 50 Hz Current consumption: max. 7 A Refrigerant: R507 Refrigerant charge: 1.07 kg Max. pressure: 25 bar Refrigeration unit: water-cooled CFC- and HCFC-free The UC055Tw series is designed as a recirculating chiller for an external closed temperature control circuit. The unit in question is a special version, “UC055Tw spec.” Dimensions: Width: approx. 600 mm Depth: approx. 600 mm Height: approx. 1,450 mm Weight: approx. 168 kg Equipment: Huber Compatible Control temperature control Digital display Connections for external temperature control circuit Cooling water connections Drain and residual drain Interfaces on the unit Main switch Stainless steel housing Transport rollers Lifting eyes Shipping data: Due to its size and weight, transport is preferably by freight forwarder. Dimensions of the unit: approx. 600 x 600 x 1,450 mm Weight of the unit: approx. 168 kg Condition: Used condition with signs of wear and tear consistent with age and use. The exact optical condition can be seen in the pictures. Scope of supply: 1x Huber Unichiller UC055Tw spec. Connection/cooling water hoses as shown in the pictures Scope of supply as shown in the pictures Podpfxjzui Uwj Alwjgt The machine is available by arrangement. The scope of supply is as shown in the pictures. Subject to change, errors and prior sale.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Tool milling machine Kunzmann WF4/3 with Heidenhain TNC 320 control system, in very good condition, CE-compliant, from a training workshop! Technical data: >> Year of manufacture 2008, machine no. 347139 >> Fixed angular table >> Speed: continuously variable up to 4500 rpm >> Feed rate continuously variable in 3 axes from 0 to 2000 mm/min >> Rapid traverse X and Y axis 5000 mm/min >> Z axis 4000 mm/min >> Travel distances X/Y/Z: 400/350/400 mm >> Table surface: 650 x 350 mm >> Table load: 250 kg >> Quill stroke vertical: 60 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic clamping system >> Weight approx. 1800 kg >> Space requirement approx.: 2.3 x 2 x 2 m >> Drive power: 15 KVA Accessories and equipment: Pedpez Eh Tqofx Alwogt >> Heidenhain TNC 320 control system >> Hydraulic clamping, vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual for the control system and programming examples >> Handwheels >> Coolant system (not shown in the pictures) About the machine: Offered is a Kunzmann WF4/3 tool milling machine with a Heidenhain TNC 320 control system. This universal milling machine is in very good condition and has only a few operating hours. It comes from a company where it was only used for training purposes. It has a very easy-to-use control system. Furthermore, the machine has hydraulic clamping in both vertical and horizontal positions. Changing from vertical to horizontal is very easy by folding down the vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Kunzmann on site while it is powered up. There are 5 identical Kunzmann WF4/3 milling machines available from a vocational school. The machines are available immediately.

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 780 h, load capacity: 1,600 kg, lifting height: 3,500 mm, free lift: 75 mm, fuel type: electric, mast type: simplex, construction height: 2,200 mm, fork length: 1,200 mm, empty load weight: 3,300 kg, total length: 1,900 mm, drive type: Elektro, construction width: 1,100 mm, Electric four-wheel forklift Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Standard Technical condition: good Front tire type: Superelastic Front tire condition: 60 - 80% Rear tire type: Superelastic Pgedpfsx A I U Esx Alwot Rear tire condition: 60 - 80% Battery voltage: 52V Battery capacity: 300Ah Battery year of manufacture: 2020 Description: Thoroughly cleaned, new inspection, new acceptance according to FEM Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, roof cover, windshield, heater, compliant with STVZO (German Road Traffic Licensing Regulations), full cab, impulse control, CE certificate.

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 768 h, load capacity: 5,000 kg, lifting height: 4,675 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, construction height: 2,450 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: very good Front tire type: Non-marking Front tire condition: 60 - 80% Rear tire type: Non-marking Rear tire condition: 60 - 80% Pjdez Elwgjpfx Alwogt Battery voltage: 80V Battery capacity: 930Ah Battery type: PzS Battery year of manufacture: 2020 Battery condition: 80 - 100% Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, full cabin, safety light, non-marking tires, interior mirror, joystick, windshield wiper.