Used Acid Maker for sale (487)

Year of construction: 2020, condition: new, DESCRIPTION The demineralized water station is used to produce the so-called demi water using ion exchange technology. The station consists of 3 columns Gedpfx Alsfz Dwzjbeuc Strongly acid cation exchanger working in the sodium cycle, Strongly basic anion exchanger working in the chloride cycle, Carbon filter Our RDI-2 / RDI-4 demineralization stations are equipped with fully automatic control heads. Rouezts The columns are made of AISI316L steel

Year of construction: 2020, condition: new, Washers Ultrasonic Baths for washing, phosphatizing, chromating, degreasing, removing paint coatings materials Gedpfxofz Dtzo Albsuc In ROMER Ultrasonic Washers, stainless steel is used which provides protection against acids. Bathtubs have an additional insulation wall, so they do not lose temperature and heat up faster. Good quality materials ensure long life of the vibrating elements. Heating system The heaters used in the ROMER bathtubs are made of the highest quality materials and are made of high temperature resistant ceramic elements. The heating system used ensures great thermal efficiency, hot water automatically mixes with cold water, heating the entire bathtub. Ultrasonic transducers Ultrasonic elements used in ROMER washers are installed in immersion modules, which better reflect vibrations and are exchangeable. The ultrasound range is 20-40kHz depending on the washed element, lower frequencies are used for large elements of high strength, lower for jewelry, sensitive mechanical systems, etc. All transducers are connected by high temperature resistant cables.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel Guodpsfz Dvvefx Albsc • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, DESCRIPTION The demineralized water station is used to produce the so-called demi water using ion exchange technology. The station consists of 3 columns Strongly acid cation exchanger working in the sodium cycle, Strongly basic anion exchanger working in the chloride cycle, Carbon filter Our RDI-2 / RDI-4 demineralization stations are equipped with fully automatic control heads. Rouezts Gujdpfsfz I Nhex Alboc The columns are made of AISI316L steel

Year of construction: 2020, condition: new, DESCRIPTION The demineralized water station is used to produce the so-called demi water using ion exchange technology. The station consists of 3 columns Strongly acid cation exchanger working in the sodium cycle, Strongly basic anion exchanger working in the chloride cycle, Carbon filter Our RDI-2 / RDI-4 demineralization stations are equipped with fully automatic control heads. Gujdpfx Asfz I Syelbec Rouezts The columns are made of AISI316L steel

Year of construction: 2020, condition: new, Description Automatic sprinkling chamber is a solution that allows you to reduce costs, improve quality and increase the efficiency of the surface preparation process. The automatic sprinkling chamber is equipped with a set of spray pumps, it was designed so that as little liquid as possible after the process migrates to subsequent processes, thus saving money and improving the quality of washing. This is very important, because apparent savings in systems made without the use of these solutions can generate in the future much higher costs associated with chemistry and waste disposal which will simply be more. Attention should also be paid to problems with maintaining the required bath parameters. Research and development work allowed us to develop a sprinkling chamber with the function of drying details (option) with hot air blown by a set of fans after the washing process. The sprinkling chamber is equipped with an advanced system for creating your own macro programs, which can consist of 10 steps each, depending on the number of tanks, processes can be repeated, their order can be changed, etc. Each tank has its own unique icon and name, enabling the operator to work intuitively. Godpfsflmdbjx Albouc Optionally, the tanks can be equipped with bath replenishment systems, which can be performed e.g. between processes or at the end of the cycle. • Control installed on the swivel arm for better access • PLC microprocessor control • 7 "touch operator panel • Very large number of nozzles, compared to other solutions • (Option) The possibility of drying details after the washing process • The ability to create your own advanced programs • Advanced damper system made of acid-resistant sheet metal, double protected by limit switches • Tight closing and full flap opening control system • To minimize fluid mixing, separate pipelines, nozzles, tanks for each treatment • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible • Fully automatic operation/ Prices are given in the catalog

Year of construction: 2020, condition: new, Description Automatic sprinkling chamber is a solution that allows you to reduce costs, improve quality and increase the efficiency of the surface preparation process. The automatic sprinkling chamber is equipped with a set of spray pumps, it was designed so that as little liquid as possible after the process migrates to subsequent processes, thus saving money and improving the quality of washing. This is very important, because apparent savings in systems made without the use of these solutions can generate in the future much higher costs associated with chemistry and waste disposal which will simply be more. Attention should also be paid to problems with maintaining the required bath parameters. Research and development work allowed us to develop a sprinkling chamber with the function of drying details (option) with hot air blown by a set of fans after the washing process. The sprinkling chamber is equipped with an advanced system for creating your own macro programs, which can consist of 10 steps each, depending on the number of tanks, processes can be repeated, their order can be changed, etc. Each tank has its own unique icon and name, enabling the operator to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be performed e.g. between processes or at the end of the cycle. Gedpfxjfy T Sze Albeuc • Control installed on the swivel arm for better access • PLC microprocessor control • 7 "touch operator panel • Very large number of nozzles, compared to other solutions • (Option) The possibility of drying details after the washing process • The ability to create your own advanced programs • Advanced damper system made of acid-resistant sheet metal, double protected by limit switches • Tight closing and full flap opening control system • To minimize fluid mixing, separate pipelines, nozzles, tanks for each treatment • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible • Fully automatic operation/ Prices are given in the catalog

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions Gujdpfxsfz Ax Ss Albec The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, DESCRIPTION The demineralized water station is used to produce the so-called demi water using ion exchange technology. The station consists of 3 columns Strongly acid cation exchanger working in the sodium cycle, Strongly basic anion exchanger working in the chloride cycle, Carbon filter Our RDI-2 / RDI-4 demineralization stations are equipped with fully automatic control heads. Gusdpfsfz I Uijx Albsc Rouezts The columns are made of AISI316L steel

Year of construction: 2020, condition: new, DESCRIPTION The demineralized water station is used to produce the so-called demi water using ion exchange technology. The station consists of 3 columns Strongly acid cation exchanger working in the sodium cycle, Gedpofz Nakefx Albsuc Strongly basic anion exchanger working in the chloride cycle, Carbon filter Our RDI-2 / RDI-4 demineralization stations are equipped with fully automatic control heads. Rouezts The columns are made of AISI316L steel

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit Gusdpfeflpmqjx Albec • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, An automatic car wash is a solution that allows you to reduce costs, improve quality and increase the efficiency of the surface preparation process. The automatic car wash is equipped with a set of pumps for spraying, it has been designed so that as little liquid as possible migrates to subsequent processes after the process, saving money and improving the quality of washing. This is very important, because the apparent savings in systems made without the use of these solutions may generate much higher costs in the future related to chemicals and waste disposal, which will be simply more. Attention should also be paid to problems with maintaining the required bath parameters. Research and development works allowed us to develop a car wash with the function of drying details (Option) with hot air blown by a set of fans after the washing process. The car wash is equipped with an advanced system of creating own macro programs, which can consist of 10 steps each, depending on the number of tanks, the processes can be repeated, their order can be changed, etc. Each of the tanks has its own unique icon and name, enabling the operator to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be carried out e.g. between processes or at the end of the cycle. • Controls installed on a swivel arm for better access • PLC microprocessor control • 7 "touch control panel • A very large number of nozzles compared to other solutions • (Option) Possibility of drying details after washing • Ability to create your own advanced programs • Advanced system of dampers made of acid-proof steel sheets, double secured with limit switches • Control system for tight closing and full opening of the flaps • To minimize fluid mixing, separate lines, nozzles, tanks for each treatment • Intelligent control - in the event of a power cut / sudden shutdown, the fluids cannot be mixed Gsdsfy T Rcepfx Albouc • Fully automatic operation

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. Guodpofzrapofx Alboc ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. Godpfjfz A D Nsx Albsuc The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, DESCRIPTION The demineralized water station is used to produce the so-called demi water using ion exchange technology. The station consists of 3 columns Strongly acid cation exchanger working in the sodium cycle, Strongly basic anion exchanger working in the chloride cycle, Carbon filter Gedpfx Alofz I Npobouc Our RDI-2 / RDI-4 demineralization stations are equipped with fully automatic control heads. Rouezts The columns are made of AISI316L steel

Year of construction: 2020, condition: new, DESCRIPTION The demineralized water station is used to produce the so-called demi water using ion exchange technology. The station consists of 3 columns Strongly acid cation exchanger working in the sodium cycle, Strongly basic anion exchanger working in the chloride cycle, Carbon filter Our RDI-2 / RDI-4 demineralization stations are equipped with fully automatic control heads. Rouezts The columns are made of AISI316L steel Gujdjfz I Srspfx Albjc

Condition: used, mileage: 2,896 km, power: 434 kW (590.08 HP), first registration: 05/2026, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 8x2, wheelbase: 5,150 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, total length: 11,030 mm, total height: 3,960 mm, loading space length: 6,320 mm, loading space width: 20 mm, Year of construction: 2026, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, navigation system, parking heater, power assisted steering, retarder, seat heater, traction control, trailer coupling, = Additional Options and Accessories = - Alarm system - Power steering - Remote central locking - Refrigerator - LED headlights - Alloy wheels - Lift axle - Air suspension - Fifth wheel coupling - Engine brake - PTO (Power Take-Off) - Radio - Rear view camera - Disc brakes - Sun visor - Spotlights - Auxiliary heater - Toolbox = Notes = Available for immediate delivery: Scania R590 V8 / 8x2*6 wide spread. Color: Ivory White. All-wheel air suspension. 2 x 10,000 kg front axle. Rear axle loads: 11,500 kg + 10,000 kg. Permissible total weight: 41,000 kg. Retarder. 515 cm wheelbase. Gearbox with crawler gear and overdrive. King of the Road. Auxiliary heater with cabin and engine heating. Premium driver's seat. Coffee maker. Refrigerator. Loading platform: Sliding table, 170 cm. Headboard with storage space for ladder and level. 2 x round outrigger, 90 cm. Stainless steel boxes all around. 4 x width marker with lighting. Large continuous box between the axles. Rung. 4 x rung row. Rung supports in side beam. Recessed tie-down eyes in side beam. Twist locks / adjustable in width. Work lights in side beams. Stainless steel rear frame with work lights and flashing lights. Water pipe / (exhaust). Crane: HMF 9520 K7 Pre-setting. Fly jib: FJ 2200 K6 2 x hand part. Winch: HMF 3200, Capacity 3,200 - 2,500 kg. 4.40 m - 17,010 kg. 7.90 m - 9,030 kg. 9.80 m - 7,070 kg. 11.80 m - 5,710 kg. 13.80 m - 4,770 kg. 16.00 m - 4,010 kg. 18.10 m - 3,470 kg. Jib: 21.20 m - 1,705 kg. 22.70 m - 1,545 kg. 24.20 m - 1,410 kg. 25.80 m - 1,295 kg. 27.50 m - 1,195 kg. 29.30 m - 1,115 kg. 31.10 m - 985 kg. 2 Manual extension parts. 33.00 m - 700 kg. 34.90 m - 400 kg. = Further Information = Technical information Number of cylinders: 8 Axle configuration Brakes: Disc brakes Suspension: Air suspension Front axle 1: Tire size: 385/55R22.5; Steered; Tire tread left: 100%; Tire tread right: 100% Front axle 2: Tire size: 385/55R22.5; Steered; Tire tread left: 100%; Tire tread right: 100% Rear axle 1: Tire size: 315/70R22.5; Double tires; Tire tread left inside: 100%; Tire tread left outside: 100%; Tire tread right inside: 100%; Tire tread right outside: 100% Rear axle 2: Tire size: 385/55R22.5; Steered; Tire tread left: 100%; Tire tread right: 100% Weights Unladen weight: 27,862 kg Payload: 13,638 kg GVW (Gross Vehicle Weight): 41,500 kg Functional Crane: HMF Maintenance APK (Technical Inspection): valid until 05/2027 Financial information Price: On request Identification Model number: R590 - 8x2 WIDE SPREAD / HMF 95 Gusdpfxezbqxxe Albjc = Company Information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT), Govorim po ryccki. We make every effort to provide accurate information, but no rights can be derived from the information provided in the texts.

Condition: excellent (used), functionality: fully functional, Stork | Battering Machine / Coating Machine Manufacturer: Stork Device Type: Battering Machine / Coating Machine Mesh belt width: 600 mm Belt material: Stainless steel Overall dimensions: 3000 × 1100 × 1730 mm Construction: Stainless steel (acid-resistant) Guodpoy Uav Usfx Albec This industrial coating machine from Stork is designed for the automatic and uniform application of liquid batters (e.g., pancake batter, tempura, slurry) onto food products. The device is a key component in production lines that manufacture products such as nuggets, cutlets, fish sticks, schnitzels, and various types of snacks and molded products. Thanks to its universal mesh belt with a working width of up to 600 mm, the machine ensures high throughput and works perfectly with industrial formers, dry battering machines, and frying tunnels (fryers). Key features: - Efficient coating system: A special design allows for precise coverage of the product with liquid batter from all sides (from below through immersion, from above through a liquid curtain), guaranteeing perfect consistency and excellent adhesion for subsequent dry battering. - System for removing excess liquid: The machine is equipped with a mechanism (e.g., air blast or vibration system) that effectively removes excess batter from the product, preventing drips and saving raw materials. - Parameter adjustment: The ability to adjust the belt speed makes it easy to synchronize the machine with the rest of the production line.

Condition: excellent (used), functionality: fully functional, Wolfking Y/D-REV | Industrial mincer for frozen blocks Manufacturer: Wolfking Model / Type: Y/D-REV Serial number: 52753 Screen diameter: 400 mm Power supply: 380 V / 3 phases / 50 Hz Rated current: 250 A Rated power: 33 kW Overall dimensions: 2700 × 1900 × 2800 mm Includes an additional pallet with parts. The Wolfking Y/D-REV is a powerful, highly efficient industrial mincer designed specifically for the pre-processing and actual grinding of whole, hard blocks of frozen meat, fish, or poultry. Thanks to its enormous 400 mm screen diameter and a 33 kW motor operating at 250 A, the machine effortlessly crushes and grinds frozen material (even down to -20°C) without the need for prior thawing or pre-cutting. This allows for maintaining the highest microbiological quality of the product and drastically reducing the process time. Key features: Gedpfx Aley Uarcjbeuc - Extreme construction: Massive body and feed hopper made entirely of acid-resistant stainless steel, designed to withstand enormous mechanical loads. - High throughput: A 400 mm diameter combined with a special geometry of the feed and cutting screw ensures a gigantic hourly throughput. - Low temperature increase: A special cutting system reduces friction to a minimum, which prevents overheating of the material during grinding and allows for maintaining the ideal structure of fat and protein.

Condition: ready for operation (used), Year of construction: 2019, HEUFT ONE: Metal Detection and Code Verification Conveyor System Model Heuft HBBNXZ72 YOM 2019 High sensitivity to ferrous and non-ferrous metals Stainless Steel Construction Full Container Checking System (A4) The devices of the new HEUFT ONE series set new standards in terms of detection accuracy, operational reliability and price / performance ratio during an in-line quality inspection in a confined space, and celebrated their world premiere at interpack. The first metal detector and an inspection system for markings up to HEUFT standards can be experienced live at the trade fair. ONE for all: the new products make an affordable introduction to HEUFT cutting edge technology as particularly compact stand-alone devices which are extremely easy to integrate into packaging lines. They combine innovative detection technologies with customised hardware and software and proven procedures for a highly precise product tracking, inspection and fault rejection. Thus the compact complete solutions remove contaminated products and incorrectly marked packaging accurately; food safety has priority! The HEUFT ONE for detecting metal achieves maximum detection accuracy with unique evaluation procedures from the HEUFT development department: it even finds minute pieces of metal in filled food packaging reliably – almost unaffected by the product effect of saline or acidic products and the influence of metal packaging components. Even special ambient conditions such as a "metal free zone" are not necessary for the reliable operation of the compact stand-alone device. The first HEUFT metal detector complements the portfolio of sophisticated systems, which identify all types of foreign objects, with a slim entry-level solution. It is ideal for all those who only wish to find objects made of iron, steel, aluminium or stainless steel first and want to achieve a detection and rejection reliability up to HEUFT standards. Gjdpfx Asyq Rkyelbjuc The new HEUFT ONE for code verification, marking and dress inspection also provides this during the high-resolution complete examination of food packaging with in-house developed colour sensor camera technology and real-time image evaluation. It detects best before and expiry dates, barcodes and 2D codes, article and serial numbers, imprints and lettering which have been incorrectly applied and are inaccurate as regards content – and that independent of their respective position. The same also applies to deviating logos as well as non-brand colouring and design elements. Proven HEUFT procedures also ensure the accurate removal of incorrectly marked products in this case. Full traceability, clear information about shelf-life and digestibility as well as an attractive appearance at the point of sale are thus always guaranteed. The solid, extremely compact construction in accordance with the hygiene-optimised HEUFT CleanDesign also makes the new HEUFT ONE devices stand out. They are straightforward to integrate into existing packaging lines even where space is limited. The HEUFT ISI bus ensures minimum wiring with the open, flexible assembly directly above the conveyor. Dispensing with change parts makes easy brand changes without mechanical changeovers possible and the organised user interface, which has been reduced to the essentials, ensures error-free operation. This together with continuous monitoring brings the metal detection and code verification in line with HEUFT standards.

Condition: excellent (used), mileage: 3,67,000 km, power: 463 kW (629.50 HP), fuel type: diesel, tire size: 385/65 R 22.5, axle configuration: 8x4, wheelbase: 4,000 mm, fuel: diesel, fuel tank capacity: 900 l, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 8,000 kg, permissible axle load (axle 3): 13,000 kg, Year of construction: 2015, Equipment: AdBlue, retarder, Color: White Manufacturer: Mercedes-Benz Type: 4163 SLT 8x4 Chassis number: WDB9634261L922193 Year: 2015 Mileage: 367,000 km Engine: OM473, inline 6, 15.6 l, 460 kW (625 hp), 3000 Nm, Euro 6 Transmission: Mercedes Powershift / G 280-16/11.7-0.69 / Turbo Retarder Clutch Front axle: 9,000 kg | Leaf suspension | 385/65 R 22.5 Second axle: 8,000 kg | Air suspension | 385/65 R 22.5 Third axle: 13,000 kg | Air suspension | 315/80 R 22.5 | Hub reduction Fourth axle: 13,000 kg | Air suspension | 315/80 R 22.5 | Hub reduction GVW: 41,000 kg GCW: 250,000 kg / 500 tons push/pull if used with ballast box (not included) Equipment Gujdpfx Aljuu E T Aeboc 900 L fuel tanks AdBlue tank, 60 L 24-volt electrical system JOST sliding fifth wheel, 3.5” New Rockinger R0*56E coupling Gigaspace cab Side skirts Work lights Tool boxes Bull bar with lights Wheelbase: 4,000 mm Axle ratio: I = 5.333 Cabin Sleeper cab Multi-functional steering wheel Cruise control Sun visor 2 x bed Air conditioning TV Leather upholstery Leather comfort seats Coffee maker Fridge drawer Storage boxes Radio / CD player / Bluetooth = Further information = General information Year of manufacture: 2015 Transmission Gearbox: Powershift / G 280-16/11.7-0.69 / Turbo Retarder Clutch, automatic Axle configuration Front axle: Tire size: 385/65 R 22.5; Max. axle load: 9,000 kg; Steered; Suspension: Leaf suspension Middle axle: Tire size: 385/65 R 22.5; Max. axle load: 8,000 kg; Steered; Suspension: Air suspension Rear axle 1: Tire size: 315/80 R 22.5; Twin tires; Max. axle load: 13,000 kg; Reduction: External planetary axles; Suspension: Air suspension Rear axle 2: Tire size: 315/80 R 22.5; Twin tires; Max. axle load: 13,000 kg; Reduction: External planetary axles; Suspension: Air suspension Weights Payload: 500,000 kg GVW: 41,000 kg Functional Body brand: Mercedes Condition Technical condition: very good Optical condition: very good Financial information Price: On request

Year of construction: 2000, condition: excellent (used), maker: diverse (Europäische Union) year: 2000 tube Ø: 40 – 150 mm wall thickness: 1 – 4 (5) mm reference material (tensile strength): 1.000 N/mm² tube length shop entry: 4 – 10 m tube length shop exit: 4 – 8 m bundle weight: max. 3.000 kg bundle Ø: max. 600 mm Guodpfx Aljmqkt Tjbec working direction: left → right The shop consists of: • tube bundle destacker I with separation MAIR • tube straightender (10 rolls) BRONX type 10Cr.6-BWS • tube bundle destacker II with separation MAIR • wet separator HANDTE • tube bundle destacker III with separation MAIR • tube testing eddy current/ultrasonic ATM/KRAUTKRÄMER/FÖRSTER • multiple-head saw MAIR type MC150/7/10 • tube bevelling machine MAIR • brushing machine MAIR • destacker/stacker MAIR • tube bundle destacker MAIR • tube banding machine MAIR/ORGAPACK • emulsion treatment SCHOENAUER • control Siemens S7 • hydraulics

Year of construction: 2000, condition: excellent (used), maker: diverse (Europäische Union) year: 2000 tube Ø: 40 – 150 mm wall thickness: 1 – 4 (5) mm reference material (tensile strength): 1.000 N/mm² tube length shop entry: 4 – 10 m tube length shop exit: 4 – 8 m bundle weight: max. 3.000 kg bundle Ø: max. 600 mm working direction: left → right The shop consists of: • tube bundle destacker I with separation MAIR • tube straightender (10 rolls) BRONX type 10Cr.6-BWS • tube bundle destacker II with separation MAIR • wet separator HANDTE • tube bundle destacker III with separation MAIR • tube testing eddy current/ultrasonic ATM/KRAUTKRÄMER/FÖRSTER • multiple-head saw MAIR type MC150/7/10 Godpjmqkubjfx Albsuc • tube bevelling machine MAIR • brushing machine MAIR • destacker/stacker MAIR • tube bundle destacker MAIR • tube banding machine MAIR/ORGAPACK • emulsion treatment SCHOENAUER • control Siemens S7 • hydraulics

Year of construction: 2000, condition: excellent (used), maker: diverse (Europäische Union) year: 2000 tube Ø: 40 – 150 mm wall thickness: 1 – 4 (5) mm reference material (tensile strength): 1.000 N/mm² Gsdpfjmqkuuex Albeuc tube length shop entry: 4 – 10 m tube length shop exit: 4 – 8 m bundle weight: max. 3.000 kg bundle Ø: max. 600 mm working direction: left → right The shop consists of: • tube bundle destacker I with separation MAIR • tube straightender (10 rolls) BRONX type 10Cr.6-BWS • tube bundle destacker II with separation MAIR • wet separator HANDTE • tube bundle destacker III with separation MAIR • tube testing eddy current/ultrasonic ATM/KRAUTKRÄMER/FÖRSTER • multiple-head saw MAIR type MC150/7/10 • tube bevelling machine MAIR • brushing machine MAIR • destacker/stacker MAIR • tube bundle destacker MAIR • tube banding machine MAIR/ORGAPACK • emulsion treatment SCHOENAUER • control Siemens S7 • hydraulics

Condition: good (used), functionality: fully functional, Treif | Dicing/Slicing Machine for Meat and Cured Meats Manufacturer: Treif Maschinenbau GmbH Device Type: Semi-automatic dicer/slicer Construction Material: Stainless steel (acid-resistant) Dimensions: 1300 x 800 x 1100 mm Professional, German-made industrial dicer from Treif, designed for precise and efficient cutting of meat (both fresh and lightly frozen), bacon, cured meats, fish, and vegetables into cubes, strips, or slices. Treif machines are the market standard in meat processing and delicatessen plants due to their legendary mechanical durability and reliability. Gedpfx Aley T Sv Debouc Key design features: - Efficient loading system: Equipped with an ergonomic, open feeding chamber with a manual or semi-automatic feed mechanism, ensuring uniform product feed to the cutting section. - Hygienic design: The housing and all components in direct contact with food are made entirely of high-quality stainless steel, allowing for quick and thorough cleaning and compliance with strict HACCP sanitary standards. - Ergonomic operation: The compact dimensions, relative to its class, allow for easy integration of the machine into existing production lines or smaller spaces in artisan butcher shops.