Used Albrecht 3-16 Mm for sale (1,06,707)

Condition: used, Bending tool, die, lower knife, lower tool, prism tool, reversible prism, 1-part die block for die bending machine, die tool, hemming tool -Tool: for press brake, die / hemming tool -Measures: see drawing in the photos -Dimensions: 150/101 / H77 mm / 150/77 / H160 mm Itsdpfegwdp Hex Adlel -Weight: 6.9 kg / 11.2 kg

Condition: like new (used), Year of construction: 2019, operating hours: 4,788 h, load capacity: 1,600 kg, lifting height: 5,450 mm, fuel type: electric, mast type: triplex, construction height: 2,480 mm, Manufacturer + model: LINDE E 16 PL - 386 / 02 evo * EX * Proplan 2GD / Zone 1-21-22 *Mast: 3F5450 ID: 26084.5626 Category: Used Mast: 3F5450 Lowered height: 2480 mm Lifting height: 5450 mm Capacity: 1600 kg Year: 2019 Hours: 4788 hours Capacity: Complete NEW * 48v / 625ah * Manufactured 05/2026 Options: * EX * Proplan !!!!! System / Certificate = INERIS 08 ATEX 3022 X Type = Cat 2G (allowed in ZONE 1 & 2) Gas group = IIB Temperature class = T4 Ijdpfozv R Ihox Adlotl Type = Cat 2D (allowed in ZONE 21 & 22 - Dust) Gas group = IIIB Temperature class = T 135 *Equipped with: - Joystick control for forward and reverse - Triplex FFL mast - Complete street lighting - Roof window - Spotlights front and rear - New type display with touchscreen !!!

Condition: used, Designation: Vibration Test System Manufacturer: Data Physics Model: LE-1216-3VH Force Rating: Sine (5 - 2000 Hz) Random (20 - 2000 Hz) 12000 lbf (53.4 kN) vector 12000 lbf (53.4 kN) rms Frequency Range Full Force Reduced Force Level 5 to 3000 Hz 2500 to 3000 Hz Maximum Displacement (Peak-Peak): Rated Stroke Limit Shock/Bump Continuous or Random Ijdpfsy Rqiwox Adlstl Electrical Overtravel Limit Between Mechanical Stops 3.0 in (76 mm) 2.5 in (63.5 mm) 3.1 in (79 mm) 3.2 in (81 mm) Maximum Velocity 71 in/s (1.8 m/s) Maximum Acceleration Sine 100 g vector, 5 to 2500 Hz Random 50 g rms, 20 to 2000 Hz Fundamental Resonance Frequency (Bare Table) 2050 Hz (nom.) Body Suspension Natural Frequency — Thrust Axis: - Vertical: 2 Hz - Horizontal: Below 2 Hz Blower Power (Full Load): 20 Hp, 20 kW; 230/460 V, 3-phase, 60 Hz Alternate Power: 20 Hp, 20 kW; 208/400 V, 3-phase, 50 Hz Air Pressure: Air Spring: - Vertical: 90-100 psig (621-690 kPa) - Horizontal: 2-5 psig (14-34 kPa) Field Specifications: - Rated Current (dc): 64 A - Maximum Voltage (dc): 240 V - Field Resistance at 20°C: 3.2 ohm Stray Flux Density with degauss coil: < 14 gauss at 12 in (304 mm) above table Field Protection: - Rated degauss coil current: 2.6 A (Nominal) - Maximum degauss coil voltage: 120 V Weight: 1216-3VH: 8000 lbs (3636 kg) Power Amplifier Model: DSA10-80 Item condition: Used item as shown in pictures Armature newly rewound Slip table / 40 mm grid M8 760 x 760 Armature bolt circles 8" / 16" M10 Please contact us if you have any questions. Shipping: The quoted shipping costs apply to deliveries within Germany. Worldwide shipping (please inquire for shipping costs outside of Germany). Sale only to commercial customers, without warranty or guarantee. Deviations from technical data and errors in the description of the items may occur and are subject to change.

Condition: used, Refrigeration system 930 kW at -5°C/35°C consisting of: 3 GEA Grasso reciprocating compressors, type: (3x) Grasso V600 Package, Baltimore Aircoil International 1 evaporative condenser, type: VXC 250R. The complete ammonia refrigeration installation consists of: -3 GEA Grasso V600 compressors -Type: GEA Grasso V600 (x3) -Volume: 580 m³/h (x3) -Speed: 1500 min⁻¹ (x3) -Cooling capacity: 1422 kW at 0°C/40°C, 930 kW at -5°C/35°C -Refrigerant: Ammonia NH3 -Year of manufacture: 2012 Ijdpozvltfofx Adlstl -Compressor dimensions: 2600 x 1650 x 1800 mm -1 Baltimore evaporative condenser -Condenser type: VXC 250R -Condenser capacity: 1078 kW -Dimensions: 3400 x 4000 x 5400 mm

Condition: ready for operation (used), Year of construction: 2015, overall weight: 700 kg, load capacity: 16 kg, arm reach: 3,102 mm, number of axes: 6, This 6-axis KUKA KR 30 L 16-2 robot arm was manufactured in 2015. It features a payload capacity of 16 kg and a reach of 3,102 mm, making it suitable for various robotic handling applications. With 4 units available, each comes with a optional teach panel, KR C4 control unit, and cable set. If you are looking to get high-quality robotic handling capabilities, consider the KUKA KR 30 L 16-2 machine we have for sale. Contact us for further details. • 4 units available • Application Type: Robotic Handling / Material Handling Robot • Controller: KRC 4 Isdpfx Adjzd Tgpoljtl • Payload Capacity: 16 kg • Max Handling Weight: 16 kg • Reach: 3,102 mm • Weight: 700 kg • With teach panel, KR C4 control unit, cable set (optional)

Condition: good (used), Cast iron bed - Floor Plate Useful surface (L x W x H): 3600 x 1200 x 300 mm Isdpfx Adezzvz Relotl 4 T-slots: width 44 x 26 mm Equipped with Levelling feet Weight: approx 3 T

Condition: excellent (used), functionality: fully functional, Machine specifications: Table size: 1,800 × 1,800 mm X-axis travel: 3,500 mm Y-axis travel: 2,147 mm measured from the machine table Itjdpfx Asz Dh Ixedljl Y-axis clearance: Reaches 70 mm below the table edge Z-axis travel: 3,236 mm W-axis travel: 800 mm Maximum workpiece weight: 25,000 kg Maximum spindle speed: 2,500 rpm CNC control/software: Siemens EdgeCAM can also be used Machine table rotation: 360°

Condition: like new (used), functionality: fully functional, total width: 1,400 mm, total length: 2,750 mm, total height: 1,840 mm, overall weight: 770 kg, empty load weight: 770 kg, Copy lathe – precision and efficiency in one A professional copy lathe designed for series production and precise machining of wooden components. The use of a copying mechanism enables quick and repeatable production of parts, which significantly increases work efficiency. The machine features a robust construction, stable operation, and a wide range of rotational speeds, allowing parameters to be adjusted for different materials and diameters. Ideal for the production of table legs, chair legs, furniture components, and other turned parts. - Large turning diameter - Copying mechanism – repeatability of parts - Smooth feed rate adjustment - Powerful and reliable motor - Ready for operation TECHNICAL SPECIFICATIONS: - Maximum distance between centers: 1600 mm - Height of centers above the bed: 250 mm - Maximum turning diameter (manual): 500 mm - Maximum turning diameter with copying: 150 mm - Maximum diameter with a moving support: 90 mm - Drive and tailstock mounting: 3 CM - Carriage feed rate: 0 – 6 m/min - Carriage return speed: Itjdpfoz A A Drjx Adljl 7.33 m/min - Spindle speed change - Spindle motor power: - Installed power: 3.7 kW - Operating pressure of the hydraulic system: 25 bar MACHINE DIMENSIONS - Length 2750 mm - Width 1400 mm - Height 1840 mm - Weight: 770 kg Financing options available through leasing or installment plans. Just visit our website: jbsmaszyny.pl We invite you to test the machine. Where can you see our machines? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE Machine transport throughout the country!

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, 3 - D Bending with fully automatic process controlled by NC Iodpfx Asz Dntujdlstl Maximum pipe diameter: 50 mm Includes 3 bending dies: 26.9 mm, 33.7 mm, 42.4 mm Used very little, therefore in very good condition.

Condition: like new (used), Year of construction: 2015, operating hours: 5,609 h, load capacity: 1,600 kg, lifting height: 3,340 mm, fuel type: electric, mast type: duplex, construction height: 2,230 mm, Manufacturer + model: LINDE E 16 - 386 / 02 evo * EX * Proplan 2G / Zone 1 * Mast: 2F3340 ID: 26042.5302 Category: Used Mast: 2F Itedpfx Adszutu Ielsl Lowered height: 2230 mm Lifting height: 3340 mm Capacity: 1600 kg Year: 2015 Hours: 5609 hours Capacity: Complete NEW * 48v / 500ah * Manufactured 05/2026 Options: * EX * Proplan !!!!! System / Certificate = INERIS 08 ATEX 3022 X Gas group = IIB Type = Cat 2G (allowed in ZONE 1 and 2) Temperature class = T4 Equipped with: - LINDE control system - Duo pedal !!! - 2 D - FFL mast - Roof window - LOW cabin < 2000 MM !!!

Condition: used, overall weight: 25,000 kg, axle configuration: 3 axles, first registration: 10/2016, next inspection (TÜV): 11/2026, Cuppers LVA 09-16 AL 3-deck livestock trailer (12324) * Hub axle * Hydraulic loading ramp * Lift axle * BPW axles * Partition gate * Drinking trough * 3 x 18.40 = 55.20 m² * Unladen weight: 8,040 kg Ijdpezq Nwdefx Adlstl * MOT (periodic technical inspection): 11/2026 * Next inspection: 05/2027 -----Internal vehicle number: 12324 Errors and prior sale excepted.

Condition: good (used), Year of construction: 2007, Eckold tool Isdpfx Aszdgb Iodlotl ECKOLD - FWR1307X Stretching tool for MAX. 6 mm MACH-ID 3811 Make: ECKOLD Type: FWR1307X Stretching tool for MAX. 6 mm Year: 2007 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2021, Angular sawing plant Numerical Control PowerControl V2.1 - CADmatic 5 (Tapio ready) No. 1 Rollers table for pre-loading (useful mm 2200 x 4500 approx) Lifting table (mm) 4300 x 2200 1st Rear-pusher, with No. 4 clamps/grippers 1st Panel Saw - Max cutting width mm 4300 Max blade projection (mm) 125 Iedpfjx Aqdcox Adlstl Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 450 (Kw 28) Adjustable speed of the saw carriage (m/min) 1 - 150 m/min 2nd Rear-pusher, with No. 8 clamps/grippers 2nd Panel Saw - Max cutting width mm 2200 Max blade projection (mm) 125 Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 450 (Kw 28) Adjustable speed of the saw carriage (m/min) 1 - 150 m/min No. 2 Front supporting tables with Air blowing system (2 x mm 800 x 2810) Total installed power A 102 OPTION: No. 1 Waste grinder

Condition: used, Dividing Head Center Height: 100 mm Ijdpfoy E T Dgox Adljtl Transmission Ratio: 40:1 Spindle Taper: SK 40 with M16 draw thread Clamping Surface: 240 x 200 mm Grid Pattern on Clamping Surface: 210 x 125 mm, Ø 14 mm - 3-jaw chuck Ø 125 mm with step jaws - Crank handle with indexing plate and sector arms - Crank handle with swing-out indexing plate for direct dividing - 1 indexing plate with hole counts: 15, 18, 21, 29, 37, 43, 51 - 1 indexing plate with hole counts: 16, 19, 23, 31, 39, 47, 53 - 1 indexing plate with hole counts: 17, 20, 27, 33, 41, 49, 57 - 24-position index (15° increments), graduated scale on work spindle - Complete dividing head, rotatable and tiltable on the base plate Dimensions (L x W x H): 410 x 370 x 300 mm Net weight: 48 kg Good condition

Condition: like new (used), Year of construction: 2016, operating hours: 12,000 h, Spinner TTC300-52 SMMCY – Turn-milling center, year of manufacture 2016 Control system: Siemens Sinumerik 840D sl, 2-channel operation Operating hours: approx. 12,000 h (meter reading: 12,137.0 h) Condition: very good, from ongoing production Safety standard: EN ISO 23125:BA3 (Chapter 3.4.5) Working area Max. swing diameter: approx. 400 mm Max. turning diameter: approx. 200 mm Max. turning length: approx. 400 mm Travel distances X1 / X2 / Z: 180 / 110 / 450 mm Y-axis: +40 / −40 mm Rapid traverse rates X1 / X2 / Y / Z: 15 / 15 / 15 / 24 m/min Main spindle Max. speed: 5,000 min⁻¹ Chuck size: 210 mm Spindle bore: 42 mm Power: 15 / 19 kW (S1 / S6 40 %) Torque: 95 / 121 Nm Counter spindle Max. speed: 7,000 min⁻¹ Chuck size: 130 mm Power: 6 / 8.5 kW (S1 / S3 25 %) Torque: 49 / 68 Nm Tool turret 2 × driven turret, BMT45 interface All positions driven, max. 6,000 min⁻¹ Power: 2.3 / 3.5 kW (S1 / S3 40 %) Torque: 7 / 11 Nm Itsdpfx Aezzvd Eodlol Detailed configuration available upon request Equipment Y-axis C-axis main and counter spindle Driven tools Chip conveyor Complete machine documentation / manuals available Connections & Units Voltage: 3/PE ~400 V, 50/60 Hz Connected power: approx. 25 kVA Operating current / fuse rating: 34 A / 35 A Hydraulics: 70 bar, tank approx. 10 l Pneumatics: 6 bar Coolant tank: approx. 150 l Central lubrication: approx. 2–3 l Sound pressure level: 70 dB(A) Transport Weight: approx. 4,600 kg (incl. counter spindle, net) Dimensions: 2,500 × 1,900 × 2,165 mm

Condition: good (used), Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate Isdpfewcdw Eex Adlotl -Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate -Type: 8230-160/5 -Outside: Ø 160 mm -Bolt circle: Ø105 mm -Mounting: Short taper 5, cone Ø 79 - 82 mm -Dimensions total Ø 160 x 65 mm -Weight: 2.2 kg

Condition: used, machine/vehicle number: IC1389, Year of construction: 1970, operating hours: 5,789 h, load capacity: 800 kg, lifting height: 3,300 mm, fuel type: electric, mast type: simplex, 5159700 Itsdpfjy Tr Rujx Adljl Serial Number: 21502

Year of construction: 1987, condition: ready for operation (used), 5 metalworking machines from various manufacturers are offered. 1) Column drilling machine VEB BS16, year of manufacture: 1960, weight: 110kg. 2) Milling machine Fritz Werner. 3) Pillar drilling machine Infratirea 4GC02502, year of manufacture: 1987. 4) Pillar drilling machine Infratirea, year of manufacture: 1987. 5) Radial drilling machine Tianjin No. 4 Z3063×20. Iodpjzqfxdsfx Adlotl

Condition: ready for operation (used), Year of construction: 2024, CNC shearing machine manufactured in 2024. This GEKA HYDRACROP 165/300 SD features a punching power of 165 tons and a maximum capacity of Ø 40 x 30 mm or Ø 34 × 34 mm. It includes five workstations for various operations such as punching, shearing, and notching. If you are looking to get high-quality shearing capabilities, consider the GEKA HYDRACROP 165/300 SD machine we have for sale. Contact us for further details. • Automatic cycles: Universal millimeter back gauge with sensor for automatic cutting • Throat: 610 mm Extended Throat • Pressing force: 500 kN • Height adjustment: Hydraulically adjustable tables at the input and output • Number of cutting heads: 5 workstations included: Punching, Angle shearing, Flat bars shearing, Bars cutting, Notching • Punching Power: 165 Ton • Maximum capacity: Ø 40 x 30 mm or Ø 34 × 34 mm • Shearing of Angles at 90º: 205 x 205 x 18 mm • Shearing of Flat Bars: 750 x 20 mm or 400 x 30 mm Itodpfx Adoztc Dijljl • Shearing of Round Bars: 60 mm • Shearing of Square Bars: 60 mm • Rectangular Notching: 90 x 58 x 16 mm • Built-in press brake with upper and lower tool 100 mm • Stop for punching • Including a wide range of dies and accessories

Condition: good (used), functionality: fully functional, machine/vehicle number: FN529029, Year of construction: 2016, operating hours: 2,761 h, load capacity: 1,600 kg, lifting height: 3,300 mm, free lift: 1,530 mm, load center: 500 mm, fuel type: gas, mast type: duplex, construction height: 2,167 mm, power: 31 kW (42.15 HP), gearing type: hydrostat, DGUV certified until: 01/2027, fork length: 2,000 mm, tire condition: 80 %, front tire type: superelastic tires (non-marking), rear tire type: superelastic tires (non-marking), overall weight: 2,888 kg, empty load weight: 2,888 kg, total height: 2,167 mm, color: yellow, Equipment: CE marking, UVV, lighting, pallet forks, sideshift, Price: €9,500 net €10,305 gross SKU: 496 Basic Information: - Manufacturer: Jungheinrich - Model: TFG 316s - Year of manufacture: 2016 - Operating hours: 2,761 h Technical Specifications: - Drive: LPG (liquefied petroleum gas) - Transmission: Hydrostatic - Pedals: Single-pedal control - Control: Single pilot - Battery: - Charger: Mast / Dimensions: - Overall height: 2,167 mm - Lifting height: 3,300 mm - Free lift: 1,530 mm - Mast type: Duplex mast - Fork length: 2,000 mm - Rated capacity: 1,600 kg - Load center distance: 500 mm Tyres: - Type: Superelastic tyres (SE) Hydraulic Equipment: - Sideshift: Integrated - Fork positioner: No - Rotator: No - Additional hydraulics: Lines 3 and 4 available and unassigned Features: - Cabin: Partial cabin - Lighting: 2x front, 2x rear - Safety equipment: Seatbelt - Heating: No Extras: Ijdpfeyftz Djx Adlotl - UVV inspection: New, on request - Immediately operational - Inspection and test drive possible on site by appointment Transport: Cost-effective shipping available on request. Invoice with VAT: You will always receive an invoice with VAT shown separately. Battery: For battery-powered machines, we are happy to provide an offer including a new battery. Contact: If you have any questions or are interested, please contact us by phone, email, or via the contact form.

Condition: good (used), 4-Application chuck, key bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Power chuck: chuck size Ø 200 mm -Type: LK 200 A72-2163-132 -Thread: M20 Itsdpfx Adev Uwqkelsl -Bolt circle: Ø 140 x 17 mm -Jaw width: 23 mm -Passage: Ø 32 mm -Dimensions: Ø 200 x 170 mm -Weight: 18.8 kg

Condition: used, functionality: unexamined, Year of construction: 1993, Mechanical plate shear Cidan MSX 20-4, year of manufacture 1993, cutting length 2,100 mm. Maximum sheet thickness 3 mm. Clamping device, front sheet support arms, rear stop with handwheel, actuation via foot pedal. Control cabinet with main switch and emergency stop on the machine. Location: Homburg (Saar), Germany. Inspection by appointment only. Price upon request, net plus VAT, ex works; dismantling and loading to be arranged. All information without guarantee. Itjdpfx Adjz A Ulzelel

Condition: excellent (used), Year of construction: 2008, operating hours: 1,000 h, functionality: fully functional, feed length X-axis: 240 mm, feed length Y-axis: 180 mm, feed rate X-axis: 30 m/min, spindle diameter: 40 mm, total width: 1,900 mm, total height: 1,800 mm, total length: 5,000 mm, overall weight: 6,000 kg, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, workpiece height (max.): 180 mm, jointer table length: 2,500 mm, workpiece width (max.): 240 mm, input voltage: 380 V, table length: 2,500 mm, number of spindles: 6, input frequency: 50 Hz, table width: 240 mm, Equipment: motor brake, 240 mm width 180 mm height 6 spindles 2 lower 2 upper Left Right Electronic adjustment of width and the two upper heads. Chrome table Lower draw rollers Central lubrication Plate lubrication First owner 2008 model year Itjdpfeztm Husx Adlsl

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Custom conversion upon request! - Tmax 160°C - Vertical lift door - Internal dimensions (L x W x H): 3300 x 2500 x 1150 mm - Controller: JUMO IMAGO - Air management: 6 fans, 6000 m³/h per fan - Net weight: 3000 kg - Connected load: 65 kW - Connection: 400V 50Hz-3/N/PE 100A/phase Ijdjxd A N Tjpfx Adlstl Oven, ovens, industrial oven, preheating oven, drying oven, hardening oven

Condition: good (used), Year of construction: 2006, Working height: 880 mm Isdpfx Ajxlradsdljtl The machine was last used to process Helima's 26 and 45 rungs. It can be converted to process other types of rungs. Width: 700 mm Depth: 1200 mm Total height: 880 mm Weight: approx. 120 kg