Used Amada Promecam Run Press for sale (19,286)

Condition: used, functionality: fully functional, Year of construction: 2008, Equipment: CE marking, angle stop, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, The machine is in good condition, fully functional, and can be tested on site. Nodpfozkgf Esx Ab Uowl

Condition: used, total length: 11,500 mm, total width: 2,450 mm, total height: 2,600 mm, Colour: Green Empty weight: 16.500 kg Veneer press Feed-through press HOT Colombo Machine dimensions: 4400x1400 Oil heated input/output is included 8 cylinders Nwodpswnhvvefx Ab Uol Complete with glue roller etc. - Documentation available: No - CE certificate present: No - Press drive: Hydraulic - Max. workpiece length [mm]: 4500 - Max. workpiece width [mm]: 1400 - Max. workpiece height [mm]: 140 - Total stroke [mm]: 140 - Number of stages [pcs]: 1 - Material of press plates: Steel - Number of cylinders [pcs]: 8 - Cylinder diameter [mm]: 85 - Working pressure [kg/cm²]: 4 - Heating type: Oil heated - Voltage [V]: 400 - Transport dimensions: 11500mm x 2450mm x 2600mm (l x w x h) - Transport weight [kg]: 16500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), functionality: fully functional, Year of construction: 2006, control type: CNC control, controller manufacturer: Fanuc, controller model: AMNC, laser type: CO₂ laser, laser power: 4,000 W, CNC laser cutting machine Amada LC 2415 alpha IV NT The machine is located in an operating facility and can be inspected while powered on. X working area max.: 2520 mm Y working area max.: 1530 mm Nwedszxtkkspfx Ab Uol Z working area max.: 300 mm Control system: Siemens Fanuc AMNC Laser power: 4000 watts Standard equipment: • Controlled axes: X, Y, Z (three axes are controlled simultaneously) • Maximum processing area: 5,040 × 1,550 mm (with repositioning) • Maximum simultaneous feed rate (X/Y): 114 m/min • Repeatability: ±0.01 mm • Maximum workpiece weight: 330 kg • Height of the processing surface: 820 mm • Dimensions of the workpiece channel: 550 × 1,750 mm • Laser type: CO₂ laser with fast axial flow and high-frequency discharge excitation • Maximum cutting thickness: • Mild steel: 10 mm • Stainless steel: 10 mm • Aluminum: 8 mm

Condition: ready for operation (used), Year of construction: 2008, pressure 56.0 t chamfer lenght 1400 mm distance between columns 1300 mm throat 220 mm stroke 200 mm dayligth 485 mm work speed 8.0 - 10.0 m/min Nsdpfx Aozy Sdxjb Uowl return speed 35.0 mm/sec Control CNC Boschert back stop - adjustable 0 - 370 mm work height max. 915 mm Cylinders : 2 Stück voltage 3x 400 V connected load 8.0 kVA weight 3700 kg very good / well-maintained condition (!!) with lots of bending tools - in checked conditions - machine video - ?v=NrpZs6Ar0Vo Equipment: - NC electro-hydraulic press brake - BOSCHERT NC control unit, front - NC electro-motorized back stop (X axis) * with 2x manually adjustable stop fingers (R+Z axis) - AMADA PROMECAM (SYSTEM A) upper tool holder - AMADA PROMECAM (SYSTEM A) lower tool holder - Handwheel with analog display for adjusting the bending angle - lots of insert tools, including tool cabinet - 1x working cylinder = double-acting cylinder - upper beam made from a solid steel plate - pressure gauge for pressing pressure (infinitely adjustable) - 2x front support tables - 1x freely movable foot switch - robust machine base - rear protective device (cover + circuit breaker) - original operating instructions (machine + control)

Condition: excellent (used), Year of construction: 2000, Technical specifications: Working length: 3100 mm Frame width: 2760 mm Press force: 170 t CNC control: OPERATOR Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 automatic crowning motorized adjustable backgauge Throat depth: 410 mm Stroke: 200 mm Working height: 960 mm Motor power: 16.5 kW CE mark Dimensions (Length x Width x Height): approx. 3500 x 2200 x 2900 mm Weight: approx. 11 tons Accessories: 1 pc. new upper tool Nwodpfx Abjyi Upde Uel 1 pc. new 4-sided die The seller is not liable for any typographical or data transmission errors. The machine is provided in a condition appropriate to its age for appearance, technology, and wear; used machines are sold without any guarantee or warranty.

Condition: reconditioned (used), Year of construction: 1998, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 067-1045 from 1998 first owner, color channels: 2 kleuren rechtdoor, paper weight (min.): 30 g/m², paper weight (max.): 350 g/m², paper width (min.): 148 mm, paper width (max.): 520 mm, paper height (min.): 100 mm, paper height (max.): 365 mm, total length: 2,765 mm, total width: 1,523 mm, total height: 1,560 mm, space requirement length: 2,765 mm, space requirement width: 1,523 mm, space requirement height: 1,560 mm, type of input current: three-phase, input current: 20 A, input voltage: 200 V, Equipment: documentation/manual, In contrast to the previous offer, the machine has been thoroughly cleaned and inspected. Several replacements and repairs have been carried out, including new timing chains, a new drive chain for the feeder, replacement of some idler rollers, and all grippers on all drums have been made of stainless steel and are now functioning smoothly, ensuring excellent register. The rollers are rated approximately 7 out of 10; they are slightly glazed and close to their minimum dimensions, but a period of approximately 1500 to 2500 hours should still be manageable without any significant issues, which is what has been promised! 2-color offset press with high-quality construction, featuring hardened and ground gears, cylinders running in class P5 preloaded tapered roller bearings (sets of 2), and lubricated via oil bath and pressure lubrication. B3 format (35x50 cm) in a conventional standard configuration (no autoplate or cocking), but with an alcohol dampening system with large rollers based on the SM52 design, producing excellent print quality. From the original owner who did not maintain the machine properly (cosmetically); however, a comprehensive maintenance history is available, performed by the importer. The latest meter reading in the history is 11.6 million impressions from 2003. Due to illness and outsourcing, the previous owner, a printing broker, has hardly used the machine since then. NEXT STEPS: We will check the machine against the current meter reading and ensure correct and reliable operation. C)2 dry ice cleaning is being considered, as is a complete overhaul of the machine, as the mechanical condition is exceptionally good. However, this would increase the cost, so the machine is currently offered in its current condition, "as is", EXW our warehouse in Son, NL (5,500,- EXW, NOW after refurbishment €7,500,- EXW van Rooij). Any type of inspection is, of course, permitted. We guarantee that the machine is free from cracks, cylinder damage and/or repairs, and that the gears are free from damage. The rubber rollers are glazed and need to be replaced. The Royce ECO circulating pump and cooling system for the dampening unit shows signs of corrosion. Some specifications, for all specifications, open the PDF at the bottom of this page. Maximum printing speed 12,000 sheets per hour Maximum paper size 365 x 520 mm Minimum paper size 100 x 148 mm or 148 x 100 mm Maximum printing area 350 x 510 mm Nedpev Nv Tajfx Ab Uewl Rubber blanket size 500 x 520 x 1.9 mm Plate size 400 - 410 x 510 mm Dampening roller in this case for film dampening is 1 (62mm) Number of ink rollers 4 pieces of 46, 48, 52 and 54 mm Feeder stack height maximum 850 mm Delivery stack height max 360 mm Electrical connection 3 phases 200 VAC 50HZ (primary), but there is a transformer for conversion from 3 x 415/400/380/230 VAC to 200VAC Total power consumption 7kW Primary fuse rating at least 20A Dimensions LxWxH = 2765 x 1523 x 1560 mm Net weight 4000 kg

Condition: ready for operation (used), Sennerskov Hydraulic Plywood Press for Sale Heavy-Duty Oil-Heated Hydraulic Press – Fully Operational A robust and well-maintained Sennerskov hydraulic plywood press is offered for sale due to changes in production requirements. Originally manufactured around 1970, the press was extensively upgraded with a modern PLC control system in 2014 and has since been used successfully in plywood manufacturing. The machine is fully operational and can be inspected while running in production. Technical Specifications * Manufacturer: Sennerskov * Year of manufacture: Approx. 1970 * PLC control system installed: 2014 * Press format: 3,650 × 2,150 mm * Daylight opening: 270 mm * Hydraulic cylinders: 20 pcs. * Cylinder diameter: 110 mm * Maximum hydraulic pressure: 230 bar * Heating system: Thermal oil heated * Weight: Approx. 40 tonnes * Included equipment: * Mylar sheets * Feeding table Description This is an exceptionally heavy-duty industrial press designed for continuous plywood and laminated panel production. The machine features a highly rigid construction, ensuring uniform pressure distribution across the entire pressing surface. The press has been used for plywood production and is suitable for a wide range of applications, including: * Plywood manufacturing * Veneered panels * Laminated wood products * Furniture components * Specialty composite panels The press was modernized with a PLC control system in 2014, providing reliable and user-friendly operation compared to older relay-based systems. Condition * Fully operational * Can be inspected under power and in production * Press plates are in excellent condition * Press plates are flat and free from known damage or deformation * Well maintained throughout its service life Nwjdpfxszd Shrj Ab Uol

Condition: like new (used), Year of construction: 2017, functionality: fully functional, operating hours: 205 h, working width: 3,000 mm, control type: CNC control, degree of automation: automatic, For Sale: Salvagnini B3 ATA 135/3000 – Year 2017 A high-performance Salvagnini B3 ATA 135/3000 hybrid press brake from 2017 is available for sale. This model combines the precision of electric actuation with hydraulic power, ensuring rapid setup times, low energy consumption, and outstanding repeatability. Equipped with the ATA (Automatic Tool Adjuster) system, it is ideal for production environments requiring frequent tool changes and short-run batches. Key Features: - ATA Automatic Tool Adjuster for rapid tool configuration - Hybrid technology: energy-efficient, quiet operation, and excellent accuracy - High repeatability and fast cycle times - Suitable for both small-batch and serial production - Robust frame and premium Italian engineering Technical Specifications: - Maximum bending force: 135 tons - Working length: 3000 mm - Table length: 3060 mm - Distance between side frames: 2640 mm - Throat depth: 435 mm - Approach/return speed: 250 mm/s - Bending speed: 15 mm/s Njdpfexykxnex Ab Ujwl - Maximum stroke: 350 mm - Table–ram opening: 600 mm - Total machine length: 4310 mm - Overall width: 1735 mm - Overall height: 3295 mm - Average energy consumption: 1.5 kWh - Machine weight: 11,700 kg - Year of manufacture: 2017 Highlights: - Quick setup thanks to ATA system - Very low operating costs - Hybrid drive ensures smooth operation and precise bending - Ideal for subcontractors, metal fabrication, and flexible production lines

Condition: used, Year of construction: 1999, pressure 100 t chamfer lenght 3100 mm distance between columns 2750 mm Stroke beam 180 mm max. opening beam/table 470 mm C-recess 350 mm Nsdpfx Abeyw Tl Ie Uewl traveldistance X1+X2 cnc programmable 600 mm R1 and R2 axis controlled by cnc 120 mm Z1+Z2 axes controlled by cnc 300-2700 mm Quick speed,inspeed 100 mm/sec bendingspeed 0-10 mm/sec opening speed 100 mm/sec Number of working hours 29000 h length 3500 mm width 1950 mm height 2550 mm weight 6700 kg total power requirement 8 kW dimensions of the machine ca. 4x2x2,5 m Control CNC All machines can be viewed under power at all times. Demonstrations of the machines possible at any time.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 14,429 h, controller manufacturer: AMADA, controller model: AMNC 3i, laser power: 3,500 W, travel distance X-axis: 2,520 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 300 mm, overall weight: 7,700 kg, total width: 5,745 mm, total height: 2,271 mm, product length (max.): 2,630 mm, number of axes: 3, This 3-axis AMADA LC2415 Alpha 5 was manufactured in 2017. It features a maximum processing area of 5,040 × 1,550 mm and a powerful 3,500 W CO₂ laser, capable of cutting mild steel and stainless steel up to 10 mm thick. The machine has a maximum simultaneous feed rate of 114 m/min and can handle workpieces weighing up to 330 kg. If you are looking to get high-quality cutting capabilities, consider the AMADA LC2415 Alpha 5 CO₂ laser cutting machine. Contact us for further details. • Control: AMNC 3i • Controlled axes: X, Y, Z (three axes controlled simultaneously) Nwsdpfx Aszzzx Ieb Ujl • Maximum processing area: 5,040 × 1,550 mm (with one reposition) • Maximum simultaneous feed rate (X/Y): 114 m/min • Repeatable positioning accuracy: ±0.01 mm • Maximum workpiece weight: 330 kg • Processing surface height: 820 mm • Work chute size: 550 × 1,750 mm • Laser resonator: AF3500i-C • Laser type: Fast axial flow, high-frequency discharge excitation CO₂ laser • Wavelength: 10.6 µm • Maximum cutting thickness: • Mild steel: 10 mm • Stainless steel: 10 mm • Aluminum: 8 mm Additional equipment • MP300 Automatic Sheet Loading System

Condition: used, Year of construction: 2001, Continuous press Manufacturer: Ligmatech Type: Optimat MDE 10 Year of manufacture: 2001 Technical data Body dimensions - Length: 300 - 2500 mm - Height: 300 - 1300 mm - Depth: 120 - 600/800 mm - Pressing forces are generated electrically, both horizontally and vertically, and can be varied independently - Pressing forces are applied vertically via a pressure plate and horizontally via 3 pressure jaws each - Pressing takes place centered and on a zero line on the operator side Positioning of the pressure jaws: - Top pressure jaw with forced guidance on the top press, optionally lowerable via cylinder - Middle pressure jaw freely programmable and motor-driven - Bottom pressure jaw freely programmable and movable via a common drive with the middle pressure jaw Nsdpfx Abezuzxbj Uowl Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: like new (used), Year of construction: 2020, Like new press brake from Ermaksan Nedpozunlhefx Ab Uowl Type: Power-Bend Pro 3100 135 Capacity: 3100 x 135 tons Delem DA56s CNC control Y1, Y2, and X axes CNC controlled Akas Fiessler laser safety system Amada/Euro clamping system Manual crowning Includes a set of tooling

Year of construction: 1959, condition: used, The machine has various defects and would require an overhaul, defects: no operating manual, no safety valves for the return stroke (no dual-channel design), no safety valves for ram down, in single-stroke operating mode the stroke is automatically completed once the brake is reached, missing cover/door for the control cabinet, selector switch is not secured, there is a continuous-run operating mode which behaves similarly to the single-stroke operating mode, no simultaneity monitoring for ram down, the safety guard on the rear of the press is not electrically interlocked and can remain open during the press stroke, a large amount of oil in the side frame, valve leaking, the machine is operational. On-site inspection is possible. Nwjdpfxjzv T Iws Ab Ujl

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, working width: 3,100 mm, bending force (max.): 130 t, control type: CNC control, number of axes: 6, Equipment: CE marking, european tool clamping system, lower tooling, safety light barrier, upper tooling, Used Amada HFE 3metre x 130ton cnc pressbrake for sale TYPE HYDRAULIC DOWNSTROKING CAPACITY 130 TONS CONTROLLED AXIS Y1, Y2, X, R1 R2 Z1 Z2 MAX BEND LENGTH 3000 MM OPEN HEIGHT 470 YEAR 2001 STROKE LENGTH 200 THROAT DEPTH 420 MOTOR POWER 11 KW FRONT GUARDING MACHINE MOUNTED ERWIN SICK ELECTRONIC SIDE INTERLOCKED FENCING REAR INTERLOCKED FENCING TONNAGE 1300 KN APPROACH SPEED 100 MM/SEC BENDING SPEED 1 – 10 MM/SEC RETURN SPEED 1-100 MM/SEC OIL CAPACITY 110 LITRES WEIGHT 7800 KG Nwjdpfx Aew Ugg Eeb Uol BACK GUAGE STROKE (X AXIS) 700 MM/S MAX GUAGE 1000MM

Condition: used, functionality: unexamined, Equipment: CE marking, finger protection, safety light barrier, Innovative finger guarding system for pressbrakes utilizing following LASER optical safety light grids in front of the tool. Installation kit with documentation. Like new, partially sealed with protective film, very little use. Nwjdpfx Aex Dq T Tob Uol

Condition: used, Year of construction: 1996, Continuous press Manufacturer: OTT Type: 300-K-D0 Year of manufacture: 1996 Technical data Plate dimensions: 2550 x 1350 mm Hot water heating 6 pressure cylinders Total pressing force: 135 t Nsdszuzwwspfx Ab Uswl Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: used, Year of construction: 2001, Short-cycle pressing line Manufacturer: Wemhöner Type: KT-F-1E Year of manufacture: 2001 Technical data - Pressing area: 5,750 mm x 2,200 mm - Operating side: left Nwjdpfx Abszuzi Te Ujl - Plate dimensions: Length: 2 x 2,600 mm - 2 x 2,620 mm Width: 2,070 mm Thickness: 6 mm - 40 mm - Pressing pressure: approx. 40 kg/cm² Note: Upon request, the complete layout plan of the system can be sent. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: used, Year of construction: 2006, pressure 80 t chamfer lenght 2550 mm distance between columns 2050 mm Stroke beam 200 mm max. opening beam/table 470 mm C-recess 350 mm max travel X-axes 700 mm Z1+Z2 axes controlled by cnc nein, manuell 4 finger mm max. distance R-axes 200 mm Quick speed,inspeed 100 mm/sec bendingspeed 0-10 mm/sec Nwodpfstv Rlbex Ab Uol opening speed 100 mm/sec Number of working hours 43000 h length 3100 mm width 1600 mm height 2550 mm weight 5750 kg total power requirement 9 kW dimensions of the machine ca. 3x2x2,5 m Control Amada OP2002 All machines can be viewed under power at all times. Demonstrations of the machines possible at any time.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, type of input current: three-phase, oil tank capacity: 90 l, total length: 1,600 mm, total width: 1,000 mm, total height: 1,600 mm, overall weight: 1,500 kg, Equipment: CE marking, documentation/manual, safety light barrier, Here is a shortened version comfortably below 3,500 characters, while keeping the important technical and sales information. OFFER OF THE WEEK! MTP HYDRAULIC CNC PRESS BRAKE 1320 MM / 40 T 2-AXIS X + Y | TOUCHSCREEN CONTROL Metal Technics Polska is a manufacturer and importer of professional CNC machines, laser systems and metalworking equipment. For 15 years, we have supplied reliable technologies to companies across Europe. The MTP 1320/40 hydraulic CNC press brake is a compact and efficient machine designed for accurate and repeatable sheet-metal bending. With a pressing force of 40 tonnes and a working length of 1320 mm, it is ideal for workshops and production companies looking for a practical and easy-to-operate bending solution. MTP-3212 TOUCHSCREEN CONTROL The machine is equipped with the MTP-3212 touchscreen controller and 2 controlled axes: * Y axis – ram movement / bending depth * X axis – rear back-gauge positioning Controller functions include: * Touchscreen interface * Programming of bending operations * Storage of bending programs * Manual programming * Tool parameter management * SD card memory * X-axis back-gauge positioning * Y-axis bending-depth control AMADA-PROMECAM STYLE TOOL CLAMPING The machine is equipped with an AMADA-Promecam-style manual upper tool-clamping system, allowing convenient replacement and positioning of the segmented upper tooling. SAFETY EQUIPMENT * Side safety guards * Front safety light curtains * Secured rear working area * Emergency stop system * Automatic stop when the protected safety zone is breached TECHNICAL DATA * Nominal force: 400 kN / 40 t * Working length: 1320 mm * Controlled axes: X + Y (2 axes) * Distance between columns: 900 mm * Throat depth: 180 mm * Ram stroke: 100 mm * Maximum daylight: 290 mm * Back-gauge range: 500 mm * Approach speed: 80 mm/s * Working speed: 9 mm/s * Return speed: 80 mm/s * Main motor power: 3 kW * Dimensions: 1500 × 1300 × 1600 mm * Controller: MTP-3212 touchscreen * Tool clamping: AMADA-Promecam style * Crowning / compensation system: Not equipped The MTP 1320/40 combines compact dimensions, simple touchscreen operation and reliable hydraulic technology. The X + Y axis configuration provides automatic back-gauge positioning and control of the bending depth, making the machine suitable for individual jobs as well as repeat production. DELIVERY Delivery can be arranged throughout Europe and beyond. Transport costs are calculated individually according to destination. Please provide your delivery address or postal code to receive a transport quotation. Nwodpoyr N E Eofx Ab Usl

Condition: new, Year of construction: 2026, machine/vehicle number: TO5_6, functionality: fully functional, operating hours: 1 h, power: 3 kW (4.08 HP), stroke length: 250 mm, operating speed: 10 mm/s, reverse speed: 100 mm/s, overall weight: 375 kg, controller manufacturer: CoastOne, controller model: Touchscreen 15", working width: 350 mm, bending force (max.): 5 t, warranty duration: 36 months, control type: CNC control, degree of automation: manual, back gauge adjustment: CNC-controlled, number of axes: 2, type of crowning: manual, actuation type: electric, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, foot remote control, lower tooling, upper tooling, Small electric table-top press brake with spindle drive TableOne 5 - CoastOne Made in Finland Pressing force: 5T Nwodpfsz A U H Eex Ab Usl Bending length: 350mm Spindles: 1 x 5T Control: TC15-2D graphic Backgauge: 1-axis controlled X-axis - R-axis manual Tool holder: Type A / R1 / ES Style / AMADA Promecam 1 set of bending tools included 36-month warranty after installation Delivery extra; available immediately Visit under power possible anytime by appointment!

Condition: good (used), Year of construction: 1994, Max pressure space : L 1900 x H 1800 mm Incl. OBEL-P High Frequenz unit. Chair seat bending : 3-4 min. pr cycle. Still connected to power. Can be examined in working condition. 1). 3D pressure can meet different shapes of plywood bending requirement and help customer develop more designs. Nwsdpfxezi Hpuo Ab Usl 2). HF heating is dielectric heating. It heats products by friction of water melocules, fast, uniformly and effective 3). HF power is selective heating. It focus on glue heating but not heat the wood material, saving energy. 4). High quality. After pressing, plywood shape is steady and hard to change. 5). HF bending press can work with metal mold, plywood mold as well as MDF mold. There are more choice for end user. Customer can make mold themselves easily. 6). HF power needs only electricity, clean and dust free.

Condition: used, Year of construction: 1981, USED ALUMINIUM PROFILE PRODUCTION LINE GENERAL INFORMATION Equipment: Aluminium Extrusion Press Manufacturer: Youngstown (USA) Press Capacity: 1,650 Metric Tons Press Type: Horizontal Hydraulic, Direct Extrusion Year: Unknown (1980s) Refurbished: 1999 Nedpfx Aezy H Rmob Ujwl Condition: Under Power Availability: Immediate 1. INDUCTION HEATING SYSTEM - Make: Local - Control: PLC (LS Master-K80) - Built in: 1999 - Rated Power: 200 kW - Loader included 2. EXTRUSION PRESS - Rated Extrusion Force: 1,650 Tons - Main Ram Stroke: 1,200 mm - Maximum Extrusion Speed: 15 mm/sec - Maximum Extrusion Pressure: 20–25 MPa Control System - PLC System: LS XGK - HMI: Touch Screen Operator Panel - Control Modes: Manual / Semi-Automatic / Automatic - Process Control: Extrusion Pressure & Speed Control Hydraulic System - Main Working Pressure: 20–25 MPa - Main Motor Power: 2 × 132 kW - Hydraulic Pumps: 2 × Kawasaki LZ-500-110R1 (600 L/min) - Oil Tank Capacity: 8,000 Liters - Oil Cooling Pump: 120 L/min Billet & Container - Container Cylinder: Ø203.2 mm - Container Heating: Induction - Billet Diameter: 150 mm - Billet Length: 550 mm Die & Tooling - Maximum Die Diameter: 230 mm - Die Change System: Manual - Die Heater 3. RUN-OUT TABLE - Length: 40 m - Cooling: Water / Air - Profile Support Rollers 4. PULLER - Speed synchronized with extrusion - Hydraulic gripping system 5. SHEAR - Cylinder: Ø155 mm - Stroke: 571.5 mm 6. COOLING BED - Length: 40 m 7. STRETCHER - Capacity: 25 Tons - Length: 30 m 8. CUTTING SAW 9. PACKING SYSTEM - Profile Stacking - Bundle Tying FLOOR SPACE 20 × 60 m

Condition: excellent (used), Technical Data: Working length: 3100 mm Distance between uprights: 2560 mm Pressing force: 220 t CNC control: OPERATOR II grafic Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Bending simulation automatic crowning motorized adjustable backgauge Throat depth: 650 mm Stroke: 200 mm Working height: 960 mm Laser safety system: FIESSLER Motor power: 17 kW CE marking Dimensions (LxWxH): approx. 3700 x 2400 x 2900 mm Weight: approx. 15 tons Accessories: 1 set of tooling: 1 upper tool 120 mm 1 lower tool, segmented die: V 50, 35, 22, 16 Condition: Very good condition, complete overhaul in 2026 The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear are age-appropriate; used machines are sold without any warranty. Nedpfxjyzm Nhs Ab Uewl

Condition: excellent (used), Year of construction: 2006, Year of manufacture: 2006 Bending length: 4,230 mm Column spacing: 3,760 mm Maximum pressing force: 1,700 kN / 170 t Nwedpfxjzt Iids Ab Uel Maximum stroke: 350 mm Weight: 14,800 kg Serial number: HFT 170-4 L N060097

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Mark Andy Digital Pro3 PLUS Hybrid Digital Printing Machine with Semi-Rotary Die-Cutting Unit Installation: April 2024 Running meters: approx. 96,000 linear meters from April 2024 to April 2026 Web width: 330 mm Digital print width: max. 318 mm Flexo print width: max. 330 mm Digital resolution: 1200 x 1200 dpi Digital printing speed: approx. 23.5 m/min Digital printing: 4 colors Flexo printing: 2 flexo units Flexo drying: air-cooled LED UV Materials: BOPP, PET, PP, paper Digital Front End / RIP: PDF workflow Power supply: 240 V, 50–60 Hz Configuration and equipment: Mark Andy Digital Pro3 PLUS hybrid digital press 2 flexo printing units Semi-rotary die-cutting unit Latest generation flexo printing stations Semi-rotary die-cutting, expandable Unwinder for laminate / KP available Bypass for “flexo only” production or blank labels available Rewinding system Nwjdpoy Ul I Aofx Ab Uol Air-cooled LED UV drying PDF digital workflow Suitable for roll-to-roll label production Accessories included: 2 x printing cylinders: 80Z and 96Z 1 x Spilker Airboy Further accessories according to final confirmation Technical highlights: The machine offers a strong combination of digital printing, flexographic printing, and semi-rotary die-cutting in one compact production line. The uploaded technical specification confirms a maximum web width of 330 mm, a digital print width of 318 mm, 1200 x 1200 dpi resolution, and a digital production speed of 23.5 m/min. The layout drawing shows a complete production concept with unwind, semi-rotary die-cutting section, print station, digital engine, and rewind system, making the machine suitable for efficient short-run and medium-run label production.