Used Amtec Side W35-Xl for sale (22,821)

Condition: reconditioned (used), Year of construction: 2015, Number of spindles 9 St. Working width 240 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 7,5 kW Working speed 6-36 m/min weight of the machine ca. 6500 kg Control CONTROL 100 PC PLUS SCM Topset XL, Year of Manufacture 2015; currently undergoing partial recondtionning in stock ----- Summary: - 9 spindles (including 4 x HSK 85 S) - Electronic horizontal and vertical positioning - 8,300 rpm - SCM "Set-up" - SCM "T-Set" - Includes workpiece infeed magazine Working dimensions: - Maximum working width: 240 mm - Minimum working width: 25 mm (reducible to 15 mm via installed special kit) - Maximum working height: 120 mm - Minimum working height: 10 mm (reducible to 6 mm via installed special kit) Special working cross-section equipment: Equipped with a special kit for extremely small minimum cutting dimensions of 15 x 6 mm. Infeed table and table surfaces: - Infeed table length: 2,500 mm (2.5 meters) - Surface finish: Wear-resistant, special chrome-plated finish for optimal sliding properties and minimal wear. Spindle specifications: Podpfx Aszl Hbijlwsrb 1. Spindle: 1st horizontal spindle (BOTTOM): - Motor power: 11 kW - Speed: 6,000 rpm - Shaft: High-precision spindle, 40 mm diameter 2. Spindle: 1st vertical spindle RIGHT: - Motor power: 11 kW - Speed: 8,300 rpm - Tool mounting: Milling spindle with HSK 85S quick-change mount - Vertical positioning: Electronic vertical positioning - Horizontal positioning: Electronic horizontal positioning 3. Spindle: 1st vertical spindle LEFT: - Motor power: 11 kW - Speed: 8,300 rpm - Tool mounting: Milling spindle with HSK 85S quick-change mount - Vertical positioning: Electronic vertical positioning - Horizontal positioning: Electronic horizontal positioning - Tool diameter adjustment "SET UP": Electronic regulation of tool diameter, tool diameter positioning 4. Spindle: 2nd vertical spindle RIGHT: - Motor power: 11 kW - Speed: 8,300 rpm - Tool mounting: Milling spindle with HSK 85S quick-change mount - Vertical positioning: Electronic vertical positioning - Horizontal positioning: Electronic horizontal positioning 5. Spindle: 2nd vertical spindle LEFT: - Motor power: 11 kW - Speed: 8,300 rpm - Tool mounting: Milling spindle with HSK 85S quick-change mount - Vertical positioning: Electronic vertical positioning - Horizontal positioning: Electronic horizontal positioning - Tool diameter adjustment "SET UP": Electronic regulation of tool diameter, Tool diameter positioning 6. Spindle: 1st horizontal spindle (TOP): - Motor power: 11 kW - Speed: 8,300 rpm - Shaft: High-precision spindle, 40 mm diameter (working length 250 mm) - Tool clamping: "T-SET" quick-clamping system for tools - Vertical positioning: Electronic vertical positioning - Horizontal positioning: Electronic horizontal positioning - "SET UP" tool diameter adjustment: Electronic tool diameter regulation, tool diameter positioning 7. Spindle: 2nd horizontal spindle (BOTTOM): - Motor power: 11 kW - Speed: 8,300 rpm - Shaft: High-precision spindle, 40 mm diameter (working length 250 mm) - Tool clamping: "T-SET" quick-clamping system for tools - Vertical positioning: Electronic vertical positioning - Horizontal positioning: Electronic horizontal positioning 8. Spindle: 2nd horizontal spindle (TOP): - Motor power: 11 kW - Speed: 8,300 rpm - Shaft: High-precision spind...

Condition: ready for operation (used), Year of construction: 2011, Number of spindles 6 St. Working width 230 mm Working height 150 mm Length of the planing table 2000 mm Feed motor 5,5 kW Feed speed 7-36 m/min. Kuper SWT 23 XL-6 Four-Sided Planer ----- Machine fully functional tested! ... Working width min/max: 18 - 230 mm Working height min/max: 8 - 150 mm Spindle configuration: 1st Spindle - bottom ----- Power: 5.5 kW Speed: 6,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 240 mm Pulley diameter: 160 mm Adjustment: axial and radial, manual 2nd Spindle - right ----- Power: 5.5 kW Speed: 6,200 rpm, incl. brake Spindle diameter: 40 mm Prsdeyyqnlspfx Alwsb Spindle length: 160 mm Pulley diameter: min. 110 mm - max. 200 mm Adjustment: axial and radial, manual, via mechanical digital display Adjustment: vertical 35 mm below Table 3rd Spindle - Left ----- Power: 7.5 kW Speed: 6,200 rpm, including brake Spindle diameter: 40 mm Spindle length: 160 mm Cutting circle diameter (125 mm): min. 110 mm - max. 200 mm Adjustment: axial and radial manual via mechanical digital display Adjustment: horizontal 18 mm to 230 mm at 125 mm diameter, vertical 35 mm below table 4th Spindle - Top ----- Power: 7.5 kW Speed: 6,200 rpm, including brake Spindle diameter: 40 mm Spindle length: 240 mm Cutting circle diameter (125 mm): min. 120 mm - max. 200 mm Adjustment: axial manual and radial electric via mechanical digital display Adjustment: vertical 8 mm to 150 mm at 125 mm diameter, axial 26 mm 5. Spindle - top ----- Power: 7.5 kW Speed: 7,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 240 mm Cutting circle diameter 125 mm: min. 120 mm - max. 200 mm Adjustment: axial manual and radial electric according to mechanical digital display Adjustment: vertical 8 mm to 150 mm at 125 mm diameter, axial 26 mm 6. Spindle - bottom ----- Power: 7.5 kW Speed: 7,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 240 mm Cutting circle diameter 125 mm: min. 110 mm - max. 250 mm Adjustment: vertical manual according to mechanical digital display, axial manual Adjustment: Radial 8 to 150 mm with a 125 mm diameter Axially 35 mm Further features: ----- -Infinitely variable feed speed, 7-36 m/min, 5.5 kW motor -Electric height adjustment, 0.75 kW -Siemens touchscreen - Includes existing planer heads (Technical specifications provided by the manufacturer - no guarantee!)

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 5,790 h, load capacity: 5,000 kg, lifting height: 6,920 mm, free lift: 2,380 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 3,350 mm, motor manufacturer: GM, gearing type: hydrostat, fork carriage width: 1,360 mm, fork length: 1,200 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 23 X 10 - 12, rear tire type: cushion tires (black), rear tire size: 355 X 50 - 15, overall weight: 12,300 kg, empty load weight: 7,300 kg, total height: 2,600 mm, total length: 2,600 mm, total width: 2,400 mm, color: yellow, Equipment: CE marking, all wheel drive, lighting, pallet forks, sideshift, # COMBILIFT C5000XL | TRIPLEX 6920 MM | FORK POSITIONER | FREE LIFT | FULL CAB | READY TO WORK 🔧 FULLY SERVICED | 🛡 WARRANTY | 🌍 WORLDWIDE DELIVERY If you are looking for a forklift that starts generating value from day one, rather than creating unexpected maintenance costs, this is the perfect machine for your business. We are offering a fully inspected and work-ready COMBILIFT C5000XL multidirectional sideloading forklift. The machine has undergone a comprehensive technical inspection, complete servicing, and extensive operational testing. It is ready for immediate use in manufacturing plants, warehouses, steel service centers, and logistics operations. ## ⭐ Key Advantages ✅ Fully serviced before delivery 🛡 Start-up warranty included 🛞 Brand new super elastic tires ✔ Excellent mechanical and cosmetic condition 🚀 Ready for immediate operation with no additional investment required 🎥 Live online machine demonstration available 🚛 Direct delivery to your facility anywhere in Europe or worldwide ## ⚙ Technical Specifications Manufacturer: COMBILIFT Model: C5000XL Year of Manufacture: 2015 Load Capacity: 5000 kg Engine: LPG Operating Hours: 5790 h Mast Type: Triplex Lift Height: 6920 mm Fork Positioner Opening: 1360 mm Fork Length: 1200 mm Cab: Full heated cab Truck Weight: 7300 kg Free Lift: 2380 mm ### 📏 Dimensions • Height: 2600 mm • Length: 2600 mm • Width: 2400 mm • Lowered Mast Height: 3350 mm ### 🛞 Tires Front: 23 x 10 - 12 Rear: 355 x 50 - 15 Condition: 100% Brand New ## 🔩 Equipment ✔ Hydraulic fork positioner ✔ Full heated cab ✔ Free lift ✔ Working lights ## 🏭 Ideal For 🌲 Timber industry 🏗 Steel mills and steel service centers 🏭 Structural steel manufacturers 📦 Handling pipes, profiles, and long materials Pjdpfx Aoz D Tmmjlwsrb 🏢 Indoor and outdoor applications ## 🤝 Why Choose FT LOGISTICS When you buy from FT LOGISTICS, you are choosing a company specializing exclusively in forklifts, sideloaders, multidirectional forklifts, and warehouse equipment. Every machine undergoes a complete technical inspection, full servicing, and operational testing before delivery. We have over 100 machines in stock, ready for immediate delivery, and supply customers throughout Europe, South America, Africa, Asia, and the Middle East. ### 🌟 We Provide 🔧 Complete pre-delivery service 🛡 Warranty 👨‍🔧 Professional technical support 💳 Leasing and financing solutions 🚛 Worldwide transport organization 📄 Export documentation and customs clearance 🤝 Comprehensive after-sales support Hundreds of customers across Europe trust our machines and return to us for repeat purchases. We can arrange a live online demonstration, provide additional photos and videos, and prepare a tailored transport quotation for delivery directly to your facility. ## FT LOGISTICS We Deliver Machines Ready To Work. 🚀

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 5,790 h, load capacity: 5,000 kg, lifting height: 6,920 mm, free lift: 2,380 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 3,350 mm, motor manufacturer: GM, gearing type: hydrostat, fork carriage width: 1,360 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 23 X 10 - 12, rear tire type: cushion tires (black), rear tire size: 355 X 50 - 15, overall weight: 12,300 kg, empty load weight: 7,300 kg, total height: 2,600 mm, total length: 2,600 mm, total width: 2,400 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, # COMBILIFT C5000XL | TRIPLEX 6920 MM | FORK POSITIONER | FREE LIFT | FULL CAB | READY TO WORK 🔧 FULLY SERVICED | 🛡 WARRANTY | 🌍 WORLDWIDE DELIVERY If you are looking for a forklift that starts generating value from day one, rather than creating unexpected maintenance costs, this is the perfect machine for your business. We are offering a fully inspected and work-ready COMBILIFT C5000XL multidirectional sideloading forklift. The machine has undergone a comprehensive technical inspection, complete servicing, and extensive operational testing. It is ready for immediate use in manufacturing plants, warehouses, steel service centers, and logistics operations. ## ⭐ Key Advantages ✅ Fully serviced before delivery 🛡 Start-up warranty included 🛞 Brand new super elastic tires ✔ Excellent mechanical and cosmetic condition 🚀 Ready for immediate operation with no additional investment required 🎥 Live online machine demonstration available 🚛 Direct delivery to your facility anywhere in Europe or worldwide ## ⚙ Technical Specifications Manufacturer: COMBILIFT Model: C5000XL Year of Manufacture: 2015 Load Capacity: 5000 kg Engine: LPG Operating Hours: 5790 h Mast Type: Triplex Lift Height: 6920 mm Fork Positioner Opening: 1360 mm Fork Length: 1200 mm Cab: Full heated cab Truck Weight: 7300 kg Free Lift: 2380 mm ### 📏 Dimensions • Height: 2600 mm • Length: 2600 mm • Width: 2400 mm • Lowered Mast Height: 3350 mm ### 🛞 Tires Front: 23 x 10 - 12 Rear: 355 x 50 - 15 Condition: 100% Brand New ## 🔩 Equipment ✔ Hydraulic fork positioner ✔ Full heated cab ✔ Free lift ✔ Working lights ## 🏭 Ideal For 🌲 Timber industry 🏗 Steel mills and steel service centers 🏭 Structural steel manufacturers 📦 Handling pipes, profiles, and long materials 🏢 Indoor and outdoor applications ## 🤝 Why Choose FT LOGISTICS When you buy from FT LOGISTICS, you are choosing a company specializing exclusively in forklifts, sideloaders, multidirectional forklifts, and warehouse equipment. Every machine undergoes a complete technical inspection, full servicing, and operational testing before delivery. We have over 100 machines in stock, ready for immediate delivery, and supply customers throughout Europe, South America, Africa, Asia, and the Middle East. Prodpfsz D Tm Hex Alwjb ### 🌟 We Provide 🔧 Complete pre-delivery service 🛡 Warranty 👨‍🔧 Professional technical support 💳 Leasing and financing solutions 🚛 Worldwide transport organization 📄 Export documentation and customs clearance 🤝 Comprehensive after-sales support Hundreds of customers across Europe trust our machines and return to us for repeat purchases. We can arrange a live online demonstration, provide additional photos and videos, and prepare a tailored transport quotation for delivery directly to your facility. ## FT LOGISTICS We Deliver Machines Ready To Work. 🚀

Condition: used, Feed roller for a four-sided planer or multi-blade saw 5 arms with feed chains Adjustable arms Psdpfx Alelqxk Aowsrb Overall machine length: 500 cm Overall arm length: 220 cm

Condition: excellent (used), Catalog number 6368 TECHNICAL DATA - max. width of workpiece 230mm - max. height of workpiece 130mm 7 spindles: 1) horizontal, lower 230mm, 5.5kW 2) vertical, right 130mm, 5.5kW 3) vertical, left 130mm, 5.5kW 4) horizontal, upper 230mm, 7.5kW 5) horizontal, upper 230mm, 11kW 6) horizontal, lower 230mm, 18.5kW 7) universal 230mm, adjustable at 360 degrees, 5.5kW - all spindles adjustable up/down, left/right - all spindles equipped with an electric brake - spindle diameter 40mm - spindles 4 and 5 adjustable electrically up/down - from above, 8 feed rollers, metal, twisting, including 2 double rollers - from above, 4 feed rollers, rubber - from above, 2 pressure rollers - from below, pawls - from below, on the side, 3 pressure rollers - from below, 2 metal rollers, smooth, feed rollers Psdpjztzgijfx Alwjrb - from below, 2 double rollers, feed rollers, rubber - rollers pneumatically pressed - feed mechanism on cardan shafts - stepless feed speed adjustment 5-36m/min - feed motor 4kW - electric adjustment of planing thickness 0.75kW - length of infeed table 1980mm - enclosed in a cabinet - central lubrication of the table - dust extraction nozzle diameters 5x120mm, 2x150mm - dimensions (L/W/H) 5500x1840x1900mm - weight approximately 5000kg ADVANTAGES – Italian made – with 7 heads – for wet and dry wood – last spindle is universal – unpainted – used planer, very good condition Net price: 116900 PLN Net price: 27190 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary depending on exchange rate fluctuations)

Condition: excellent (used), Catalog number: 6338 TECHNICAL DATA - Max. width of workpiece: 230mm - Max. height of workpiece: 160mm 7 spindles: 1) Horizontal, lower: 230mm, 5.5kW 2) Vertical, right: 160mm, 5.5kW 3) Vertical, left: 160mm, 5.5kW 4) Horizontal, upper: 230mm, 7.5kW 5) Horizontal, upper: 230mm, 7.5kW 6) Horizontal, lower: 230mm, 7.5kW 7) Universal: 360°, 230mm, 7.5kW - All spindles adjustable up/down, left/right - Spindle diameter: 40mm - All spindles equipped with a brake Psdpjztzgpefx Alwsrb - Spindle speed: 6000 rpm Top: - 6 toothed, metal feed rollers, including 2 double rollers - 4 rubber feed rollers, including 1 double roller - 3 pressure rollers at the outlet Bottom: - Side pressure roller at the inlet - Toothed, feed roller, swiveling in the lower bed - 3 smooth, metal feed rollers - Rollers adjustable pneumatically - Length of the feed table: 1190mm - Central lubrication of the table - Electric adjustment of the cutting depth - Body lifting motor: 0.56kW - Smooth adjustment of the feed speed on an inverter: 6-24m/min - Feed motor: 3.7kW - Feed on Cardan shafts - Enclosed in a cabinet - Diameter of the dust extraction nozzle: 7x125mm - Dimensions (L/W/H): 5100x2070x1900mm - Weight: approx. 5000kg ADVANTAGES – 7 heads – Universal spindle – Ideal for wet and dry wood – Spindles equipped with brakes - DTR documentation – Used planer, very good condition Net price: 115900 PLN Net price: 26960 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary with higher fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7133 TECHNICAL DATA - max. width of workpiece: 220mm - max. height of workpiece: 120mm – 5 spindles: 1) horizontal lower 220mm, 5.5kW 2) vertical right 120mm 3) vertical left 120mm; 2 and 3, 11kW 4) horizontal upper 220mm, 11kW 5) horizontal lower 220mm, 5.5kW - all spindles adjustable up/down, left/right - spindle diameter 40mm - pneumatic pressure pads - from above: 4 infeed rollers, toothed, including 2 double rollers - from above: 1 double outfeed roller, smooth, rubber - from below: outfeed roller, rubber - feed on Cardan shafts - feed speed adjustment - feed motor 2.2kW - lifting motor 0.25kW - electric adjustment of planing thickness - length of infeed table 1970mm - central lubrication - diameter of dust extraction nozzle 4x120mm, 140mm - dimensions (L/W/H) 3500x1550x1400mm Pjdpfx Aezrulcelworb - weight 1750kg ADVANTAGES – with 5 heads – German-made – unpainted – used planer, very good condition Net price: 39900 PLN Net price: 9280 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to higher fluctuations)

Condition: excellent (used), Catalog number 8033 TECHNICAL DATA Pedoztziwepfx Alworb max. width of the workpiece – upper shaft 510mm max. width of the workpiece – lower shaft 450mm max. thickness of the workpiece, processed on both sides 200mm – from above: pulling roller ratchets 1 metal toothed pulling shaft 2 metal sequential pulling shafts 1 metal toothed pulling shaft pressure roller planing shaft 510mm, 4 knives, with the possibility of installing profile knives approx. 7.5kW smooth metal pulling shaft upper pressure roller at the outlet with 2 pulling rollers – from below: adjustable infeed table with guide planing shaft 300mm, 3 knives 3kW slip shaft, metal planing shaft 450mm, 4 knives 5.5kW 2 smooth metal pulling shafts – from the rear: 2 side spindles 1) vertical right 150mm 4kW 2) vertical left 150mm 4kW spindle diameter 40mm spindles adjustable up/down, right/left spindles lockable axes arranged in alternating pattern electric height adjustment 2 types of feed speed + stepless 5-13, 13-36m/min diameter of the dust extraction socket 2x120mm, 150mm dimensions (length/width/height) 3200x1500x1600mm + control panel weight 1980kg – manufactured in Portugal – electric table lifting – ideal for processing both wet and dry wood – 3 planing shafts + 2 spindles – very good condition – used planer Net price: 38900 PLN Net price: 9047 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant fluctuations)

Condition: excellent (used), Catalog number 6747 TECHNICAL DATA - max. planing width 170mm - max. planing height 130mm 7 spindles: 1) horizontal lower 170mm 4kW 2) vertical right 130mm 5.5kW 3) vertical left 130mm 5.5kW 4) vertical right 130mm 5.5kW 5) horizontal upper 170mm 4kW - 5 spindles with electrically adjustable up/down movement 6) horizontal lower 170mm 5.5kW 7) universal 170mm, adjustable at an angle of 180° 7.5kW - diameter of all spindles 35mm - all spindles adjustable up/down and left/right - 6 toothed feed rollers on top, including 2 double rollers - 4 rubber feed rollers on top - feed rollers with pneumatic pressure - 1 pressure roller on the side - 2 guide strips on the table - electric adjustment of planing thickness 0.37kW - length of the infeed table 2480mm - stepless adjustment of feed speed - feed motor 2.2kW - diameters of dust extraction nozzles 1x135mm, 5x120mm - dimensions (L/W/H) 5550x1900x1660mm - weight approx. 3500kg ADVANTAGES - German-made - with 7 heads - universal spindle - used planer, very good condition Net price: 27900 PLN Net price: 6488 EUR Pjdpfx Ajzwwmaolwsrb Net price calculated based on an exchange rate of 4.30 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Condition: new, functionality: fully functional, Year of construction: 2025, load capacity: 5,000 kg, empty load weight: 156 kg, total length: 1,300 mm, construction width: 1,300 mm, Sideshifter Predpfxjrf Ilbe Alwob Load centre: 500 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: New equipment Technical condition: New Description: SIDESHIFTER high-performance model. Sideshift: +/- 100 mm with SMOOTHROLL – support roller guidance in the lower jaws to ensure smooth sideshift movement, even in dusty environments, and SOFTSTOP – automatic end position damping to protect the mast profiles. Fork carriage width: 1,300 mm Load capacity: 5,000 kg at 500 mm LSP Load centre distance: 82 mm Own load centre at 44 mm Weight: approx. 156 kg Paint finish: RAL 7021 (black grey)

Condition: used, functionality: fully functional, mileage: 2,27,238 km, power: 368 kW (500.34 HP), first registration: 07/2024, fuel type: diesel, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2024, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Cabin type: Globetrotter XL Volvo FH 500 Eco torque software - Improved economy mode. Fuel economy optimized cruise control for I-Save Volvo Engine Brake - Retardation D13K-375kW/D16-500kW Gearbox: I-shift Automated 12-speed - GCW 60 tonne Engine type: NEW D13K500 diesel engine, 500hp, 2500Nm SCR and EGR Batteries : 2 x 210 Ah - AGM Absorbent Glass-fibre Material type Euro standard: Euro VI SCR, EGR and particulate filter Rear Camera - GSR Compliant fitted at end of frame Driver comfort Seats: regular Beds: regular I-ParkCooling : Without Parking heater (Webasto): 1.8kW Air to air Fridge: 33 litre under bunk mounted fridge / freezer with dividers Air conditioning: Electrically controlled air conditioning with sun sensor Driver attention support: Driver Alert Support Warning Side Collision Avoidance Support, passenger and driver side Interior sun visor - Driver & passenger side Technical specifications Wheelbase: 3800 mm Fifth wheel height: 150mm leg-height Front axle load: 7.1 tonne Adaptive cruise control: NO I-See Predictive Cruise Control with lower operating settings - Map based topography information ADR: Without Full air cab: Without Drive Axle ratio: 2.31:1 Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Advanced Emergency Brake System Fuel tanks capacity (left, right): 610 LITRE, RIGHT SIDE FUEL TANK, 610 LITRE, LEFT SIDE FUEL TANK Ad blue tank capacity: 65 litre under cab Additional roof lights: without Volvo Extended Front cab: PART OF AERO CAB Psdjz E Hffepfx Alworb Technology Display, media display: Infotainment System Telematics connection gateway: GSM/GPRS/4G modem, LTE & WLAN Exterior Mirror cameras: no Headlights Automatic - LED headlights Roof lights: without Side Skirts: Without Deflectors: Roof air deflector Volvo. Cab Enh Exterior Trim Levels: Basic finish - Satin badges, Grey grille, instep, bumper & spoiler, mirror housing and sun visor Tyres Information Front left - 10 mm Front right - 10 mm Rear left inner - 5 mm Rear left outer - 5 mm Rear right inner - 5 mm Rear right outer - 5 mm

Condition: used, functionality: fully functional, mileage: 1,94,441 km, power: 338 kW (459.55 HP), first registration: 04/2025, fuel type: diesel, overall weight: 8,461 kg, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2025, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Cabin type: Globetrotter XL Volvo FH 460 Eco torque software - Improved economy mode. Fuel economy optimized cruise control for I-Save Volvo Engine Brake - Retardation D13K-375kW/D16-500kW I-shift Automated 12-speed - GCW 60 tonne NEW D13K460TC Turbo-compound diesel engine, 460hp, 2600Nm SCR and EGR Pedpjz E Hfrjfx Alwjrb Battery: 2 x 210 Ah - AGM Absorbent Glass-fibre Material type Euro VI Step E Rear Camera - GSR Compliant fitted at end of frame Driver comfort Seats: regular Beds: regular I-ParkCooling: Without Parking heater (Webasto): 1.8kW Air to air 33 litre under bunk mounted fridge / freezer with dividers Electrically controlled air conditioning with carbon filter, sun, mist, and air quality sensor Driver Alert Support Warning Side Collision Avoidance Support, passenger and driver side Interior sun visor - Driver & passenger side Technical specifications Wheelbase: 3800 mm Fifth wheel height: 150mm leg-height Front axle load: 7.5 tonne Retarder: NO ACC - Adaptive cruise control: YES I-See Predictive Cruise Control with lower operating settings - Map based topography information ADR: Without Drive Axle ratio: 2.31:1 Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Forward collision warning with adaptive cruise control and AEBS advanced emergency brake system Fuel tanks capacity (left, right): 610 LITRE, RIGHT AND LEFT SIDE FUEL TANK Ad blue tank capacity: 99 litre under/behind cab Additional roof lights: Without Tyres 315/70R22.5 Technology Infotainment System GSM/GPRS/4G modem, LTE & WLAN Exterior Mirror cameras: NO Headlights LED Daytime driving lights LED Roof lights: without Side Skirts: Side skirts on fuel tanks Deflectors: Roof air deflector Exterior Trim Levels: Enhanced complete paint - Main Grille, handles, mirrors, bumper in cab colour Tyres Information Front left - 13 mm Front right - 13 mm Rear left inner - 16 mm Rear left outer - 16 mm Rear right inner - 16 mm Rear right outer - 16 mm

Condition: used, functionality: fully functional, mileage: 1,81,725 km, power: 338 kW (459.55 HP), first registration: 05/2025, fuel type: diesel, overall weight: 8,461 kg, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2025, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Cabin type: Globetrotter XL Volvo FH 460 Eco torque software - Improved economy mode. Fuel economy optimized cruise control for I-Save Volvo Engine Brake - Retardation D13K-375kW/D16-500kW I-shift Automated 12-speed - GCW 60 tonne NEW D13K460TC Turbo-compound diesel engine, 460hp, 2600Nm SCR and EGR Battery: 2 x 210 Ah - AGM Absorbent Glass-fibre Material type Euro VI Step E Rear Camera - GSR Compliant fitted at end of frame Driver comfort Seats: regular Beds: regular I-ParkCooling: Without Parking heater (Webasto): 1.8kW Air to air 33 litre under bunk mounted fridge / freezer with dividers Electrically controlled air conditioning with carbon filter, sun, mist, and air quality sensor Driver Alert Support Warning Side Collision Avoidance Support, passenger and driver side Interior sun visor - Driver & passenger side Technical specifications Wheelbase: 3800 mm Fifth wheel height: 150mm leg-height Front axle load: 7.5 tonne Retarder: NO ACC - Adaptive cruise control: YES I-See Predictive Cruise Control with lower operating settings - Map based topography information ADR: Without Drive Axle ratio: 2.31:1 Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Forward collision warning with adaptive cruise control and AEBS advanced emergency brake system Fuel tanks capacity (left, right): 610 LITRE, RIGHT AND LEFT SIDE FUEL TANK Ad blue tank capacity: 99 litre under/behind cab Additional roof lights: Without Tyres 315/70R22.5 Technology Infotainment System GSM/GPRS/4G modem, LTE & WLAN Prodpfx Alsz E Hcwewsb Exterior Mirror cameras: NO Headlights LED Daytime driving lights LED Roof lights: without Side Skirts: Side skirts on fuel tanks Deflectors: Roof air deflector Exterior Trim Levels: Enhanced complete paint - Main Grille, handles, mirrors, bumper in cab colour Tyres Information Front left - 14 mm Front right - 14 mm Rear left inner - 5 mm Rear left outer - 5 mm Rear right inner - 5 mm Rear right outer - 5 mm

Condition: excellent (used), CATALOGUE NUMBER 7679 TECHNICAL DATA - max. planing width 610mm - max. planing height (two-sided) 200mm - electric adjustment of the table, up/down - max. planing height (four-sided) 100mm – Top: - toothed infeed roller - ejectors - pressure roller - 2 toothed pull rollers - pressure roller - planing roller 610mm, 4-knife, 7.5kW - pressure roller - smooth, outfeed pull roller – Bottom: - guide rail - toothed pull roller - planing roller 610mm, 4-knife, 5.5kW - 2 smooth pull rollers – Rear: - 2 side spindles + pressure roller 1) vertical right 100mm 4kW 2) vertical left 100mm 4kW - spindle diameter 35mm - spindles adjustable up/down, right/left - manual adjustment of planing width - 6 feed speed settings 7/9/11.5/14/18/23m/min - feed motor 3.1kW - dimensions (L/W/H) 2500x1800x600mm - weight approximately 3000kg ADVANTAGES – ideal for processing logs, flooring, etc. – manufactured by the German brand KUPFERMUHLE – 2 horizontal planing rollers + 2 vertical spindles – used planer, very good condition Net price: 56900 PLN Prodpfjzw Dinex Alwob Net price: 13233 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: excellent (used), functionality: fully functional, Year of construction: 2025, operating hours: 20 h, load capacity: 3,000 kg, lifting height: 5,550 mm, free lift: 1,600 mm, load center: 600 mm, fuel type: diesel, mast type: triplex, construction height: 2,450 mm, motor manufacturer: KUBOTA, gearing type: hydrostat, fork carriage width: 1,750 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 16 x 7 – 10.5, rear tire type: cushion tires (black), rear tire size: 22 x 10 x 16, overall weight: 9,500 kg, empty load weight: 6,500 kg, total height: 2,250 mm, total length: 1,550 mm, total width: 1,500 mm, color: green, Equipment: CE marking, adjustable boom, all wheel drive, fork extension, front guard, full service history, head guard, lighting, pallet forks, sideshift, COMBILIFT CB3000 – 2025 – 6 MTH – DIESEL – TRIPLEX 5,500 mm – FORK POSITIONER – SIDE SHIFT – FULL FREE LIFT 🟢 PURCHASE OR RENTAL AVAILABLE Used and new forklifts with quality guarantee – FT LOGISTICS 🔧 Ready for operation. No compromises. This COMBILIFT CB3000 is more than just a machine — it is the assurance that your logistics will run smoothly, reliably, and without downtime. Engineered for the toughest applications and after complete technical and visual reconditioning, this truck presents as new and is immediately ready for use. 🔍 Key technical details: 📅 Year of manufacture: 2025 ⏱ Operating hours (MTH): 6 ⛽ Drive: Diesel 🏋️ Rated capacity: 3,000 kg 📐 Mast: Triplex – 5,500 mm lifting height 🔄 Fork positioner: 1,750 mm | Forks: 1,200 mm 🛞 Tyres: Solid (100%) ✅ Condition: 5/5 – NEW 📏 Height: 2,250 mm | Length: 1,550 mm | Width: 1,500 mm 📦 Overall height: 2,450 mm 🛞 Tyres: Solid – Front axle 16 x 7 – 10.5 | Rear axle 22 x 10 x 16 ❄️🔥 Fully enclosed heated cab ⚖️ Machine weight: 6,500 kg 🎯 Load centre: 600 mm Psdpfjz E Dz Rjx Alwjrb ⬆️ Free lift: 1,520 mm 🏭 Ideal for: - Narrow-aisle warehouses - Timber, steel, and pipe industry - Handling long loads - Indoor and outdoor operations

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 4,799 h, load capacity: 2,500 kg, lifting height: 3,300 mm, fuel type: electric, mast type: simplex, construction height: 2,400 mm, fork carriage width: 1,250 mm, fork length: 600 mm, empty load weight: 5,024 kg, total length: 2,950 mm, drive type: Elektro, construction width: 1,640 mm, Four-way side loader Load center: 350 Fork width: 125 mm Fork thickness: 40 mm Mast type: Standard Psdpfxjwkxgds Alwjrb Condition: Ready for use and fully functional Technical condition: very good Front tire type: Superelastic Rear tire type: Superelastic Battery voltage: 48V Battery Ah: 620Ah Battery year of manufacture: 2013 Description: In addition to this Bulmor model, we have approximately 200 heavy-duty forklifts, compact forklifts, reach trucks, and side loaders in our Hamburg and Gdansk warehouses. Visit our website - sago-online. Lease-to-own and financing options are available at favorable terms. We also gladly purchase your used equipment, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed information about this EMU 25 ST GT N. LK6.7 P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and custom construction for forklifts from 8 tons upwards. We also offer consignment sales for your vehicle. Platform height: 380 mm

Condition: used, machine/vehicle number: 008288, Position 1: Panel Feeding and Loading SCM-MAHROS - STEFANI - CELASCHI Position 2: Double Sided Squaring/Edgebanding Machines SCM-MAHROS - STEFANI - CELASCHI Pedpfxex Nv S Uo Alwjrb Position 3: Panel Turning Device SCM-MAHROS - STEFANI - CELASCHI Position 4: Double Sided Squaring/Edgebanding Machines SCM-MAHROS - STEFANI - CELASCHI Position 5: Panel Turning Device SCM-MAHROS - STEFANI - CELASCHI Position 6: Splitters SCM-MAHROS - STEFANI - CELASCHI Position 7: Panel Stacking and Offloading SCM-MAHROS - STEFANI - CELASCHI

Condition: good (used), functionality: fully functional, mileage: 21,865 km, power: 96 kW (130.52 HP), fuel type: diesel, gearing type: mechanical, overall weight: 2,400 kg, empty load weight: 1,560 kg, maximum load weight: 840 kg, first registration: 03/2025, next inspection (TÜV): 07/2028, loading space length: 1,800 mm, loading space width: 1,300 mm, loading space height: 1,100 mm, emission class: euro6e, color: white, number of seats: 3, number of previous owners: 1, machine/vehicle number: EULW2488, Equipment: ABS, air conditioning, airbag, all-season tires, car registration, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, parking sensors, power assisted steering, rear view camera, seat heater, second-hand vehicle warranty, sliding door, soot filter, traction control, truck registration, Special equipment: Infotainment system "AIO" with a 10" touchscreen, DAB, Bluetooth interface, Magic Cargo seat package Additional equipment: Airbag for driver/front passenger, rear parking assistance, rear hinged doors without glazing, body/superstructure: van, load compartment partition, model revision, engine 1.5 L - 96 kW diesel, wheelbase 2975 mm, tire repair kit, tire pressure monitoring system, low emissions according to emission standard Euro 6e, Eco-LED headlights, sliding door on the right, black side protection strips, service system: Connect Box (microphone, speakers, SOS button, SIM card), front left seat adjustment (4-way), front right seat adjustment (4-way), start/stop system, lashing eyes in the cargo/load compartment, auxiliary heater. Load compartment length: 180 cm Load compartment width: 130 cm Load compartment height: 110 cm Distance between wheel arches: 114 cm Prsdpfx Aoz E Rrcslwsb

Year of construction: 1990, condition: good (used), Board conveyor with side pushers - It was used after a band saw with a shift to the side with the help of a chain. - Can be used after sawing the boards. - Weight around 2 tons - length: 7,4 m, - roller width: 400 mm, - width: 2,4 m. Prjdpfxjtdd Aco Alwob - electric motors: 1.1 kW, 1.5 kW

Condition: excellent (used), working width 230mm working height 120mm 6 heads heads set: bottom/right/left/top/bottom/universal two axes heads regulation spindles diameter 40mm Prsdez Hcipjpfx Alwsb spindles speed 6000 RPM variable regulated feeder digital displays of working dimensions electric regulation of pressure rolls pneumatic pressure of feeding rolls grooved table

Condition: used, functionality: fully functional, mileage: 2,52,750 km, power: 368 kW (500.34 HP), first registration: 02/2024, fuel type: diesel, overall weight: 8,177 kg, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features I-See Predictive Cruise Control - Map based topography information Globetrotter XL Single energy battery system (2 batteries) NEW D13K500 diesel engine, 500hp, 2500Nm SCR and EGR I-shift Automated 12-speed - GCW 60 tonne Standard transmission shift - I-Shift or Powertronic Volvo Engine Brake - Retardation D13K-375kW/D16-500kW Advanced Emergency Brake System AEBS Driver attention support Driver comfort Electrically controlled air conditioning with sun sensor Comfort 4: suspended - belt in seat Comfort 4: suspended - belt in seat Height adjustable foldable top bunk 700 x 1900mm Lower bunk 815mm wide in the centre 1.8kW Air to air 33 litre under bunk mounted fridge / freezer with dividers Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21R22.5 Jost JSK 37 cast fixed or sliding fifth wheel Wheelbase: 3800 mm Drive axle ratio: 2.31:1 610 LITRE, RIGHT SIDE FUEL TANK 610 LITRE, LEFT SIDE FUEL TANK 65 litre under/behind cab Eco torque software - Improved economy mode. Fuel economy optimized cruise control for I-Save Technology Secondary colour information display. Fleet Management System gateway - required for telematics and Dynafleet dealer fit. Pjdpfx Aez D Ufwslwerb Exterior LED headlamps V-shaped Front fog lights - white Static corner lights - works with indicator at low speed to light up direction Roof air deflector Cab side air deflector - long tractor Tyres Information Front left - 13 mm Front right - 13 mm Rear left inner - 12 mm Rear left outer - 4 mm Rear right inner - 12 mm Rear right outer - 12 mm

Year of construction: 2019, condition: used, overall weight: 1,400 kg, load center: 600 mm, load capacity: 12,000 kg, working range: 2,200 mm, machine/vehicle number: 449297, Hersteller: Durwen Typ: 805.5122-12.01 Aufnahme: Pin-Type / Direktmontage Internationaler Transport möglich/ International delivery available Bauart: Ballenklammer mit Seitenschub Baujahr: Abmessungen: • Gesamtbreite: 2240 mm • Bauhöhe ohne Gitter: 930 mm • Gesamthöhe mit Gitter: 1200 mm • Innenmaß zwischen Trägern: 530 mm Öffnungsbreite: • min: 200 mm • max: 2200 mm Kapazität / Leistung: • Tragkraft: 12000 kg • Lastschwerpunkt: 600 mm Gewichte: • Eigengewicht: 1400 kg • Vorbaumaß: 450 mm Ausstattung: • Seitenschub vorhanden Prsdpfx Alsxw I E Howob • Hydraulik komplett funktionsfähig • Klammerarme Heavy-Duty Ausführung Hersteller: Durwen Typ: 805.5122-12.01 Aufnahme: Pin-Type / Direktmontage Internationaler Transport möglich/ International delivery available Bauart: Ballenklammer mit Seitenschub Baujahr: Abmessungen: • Gesamtbreite: 2240 mm • Bauhöhe ohne Gitter: 930 mm • Gesamthöhe mit Gitter: 1200 mm • Innenmaß zwischen Trägern: 530 mm Öffnungsbreite: • min: 200 mm • max: 2200 mm Kapazität / Leistung: • Tragkraft: 12000 kg • Lastschwerpunkt: 600 mm Gewichte: • Eigengewicht: 1400 kg • Vorbaumaß: 450 mm Ausstattung: • Seitenschub vorhanden • Hydraulik komplett funktionsfähig • Klammerarme Heavy-Duty Ausführung

Condition: excellent (used), Year of construction: 2006, machine/vehicle number: AA1/015841, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 6,050 mm, travel distance Y-axis: 1,240 mm, travel distance Z-axis: 200 mm, number of slots in tool magazine: 12, total length: 7,250 mm, total width: 2,420 mm, overall weight: 4,800 kg, table length: 6,050 mm, table width: 1,240 mm, Equipment: CE marking, SCM RECORD 100 AL XL CNC machining center, manufactured in 2006. A machine from the renowned Italian manufacturer, SCM Group, designed for professional processing of wood, MDF, plywood, chipboard, and other wood-based materials. Psdpfx Alszynkhjwjrb Model: RECORD 100 AL XL Year of manufacture: 2006 Weight: 4800 kg Power supply: 400 V / 3 phases / 50–60 Hz Rated current: 62 A Technical specifications Working area / axes: X-axis: 6050 mm Y-axis: 1240 mm Z-axis: 200 mm Rapid traverse X: 60 m/min Rapid traverse Y: 45 m/min Rapid traverse Z: 30 m/min Electrospindle: manufacturer: SCM power: 8.5 kW maximum speed: 24,000 rpm tool holder: HSK-F63 automatic tool changer automatic magazine: 12 HSK-F63 tools Drilling unit: 7 vertical spindles 5 horizontal/angled spindles capability for vertical and side drilling Vacuum system: 2 × Becker VTLF 250 vacuum pump performance of one pump: 248 m³/h at 50 Hz total rated performance: 496 m³/h power of one pump: 5 kW vacuum: 200 mbar Other equipment manual manipulator for machine operation table with vacuum clamping system capability for processing parts with a length of over 6 meters central chip extraction system from the machining head brush guard for the machining head safety mats complete enclosure of the working area CE marking The machine has a large working area of 6050 × 1240 mm, making it suitable for both standard panels and the processing of very long parts. The powerful 8.5 kW / 24,000 rpm / HSK-F63 electrospindle, automatic tool changer, and 12-position HSK magazine allow for the performance of various operations without manual tool changes. An additional advantage is the drilling head equipped with 7 vertical and 5 horizontal spindles, as well as a highly efficient vacuum system with two Becker VTLF 250 pumps with a total rated performance of approximately 496 m³/h. The machine has a solid, industrial-grade construction – weight 4800 kg.

Condition: excellent (used), Catalog number: 7734 TECHNICAL SPECIFICATIONS - Shaft width: 630mm - Max thickness of workpiece: 230mm - 4-knife planing shaft * Top: Podsztxg Tepfx Alwjrb - Ratchets - Toothed infeed shaft, pulling - Pressure roller - Planing shaft - Pressure roller - 2 smooth, pulling outfeed shafts * Bottom: - Adjustable roller in the lower bed - Motor approx. 7.5kW - Smooth feed speed adjustment - Diameter of dust extraction nozzle: 145mm - Dimensions L/W/H: 1250x1300x1300mm - Weight: 908kg ADVANTAGES - Made in Italy - Very good condition - Used thickness planer Net price: 19900 PLN Net price: 4630 EUR, depending on the exchange rate of 4.3 EUR (Prices are subject to change due to fluctuations in the exchange rate)