Used Arminius Profile Grinding Machine for sale (67,075)

Condition: used, Year of construction: 1985, grinding length 600 mm grinding width 200 mm total power requirement 7,5 kW Blsdpjwd Tx Uefx Amnji weight of the machine ca. 2,3 t

Condition: used, Year of construction: 2000, grinding length 1600 mm grinding width 600 mm workpiece height 500 mm total power requirement 50 kW Bodpfx Aet Hxcbomnjli

Year of construction: 2002, condition: used, grinding diameter 10-300 mm grinding length 650 mm centre height 175 mm total power requirement 12 kW Blodpfsva I N Usx Amnoi weight of the machine ca. 3,7 t

Condition: used, O F F E R We can offer you ex stock, subject to prior sale and errors: TSCHUDIN (CH) Centerless cylindrical grinding machine Model TC-300 Year of manufacture 2001 Grinding range – Ø 0.5 – 25 mm (30) Max. workpiece length for plunge grinding 125 mm (140) Max. workpiece length for through-feed grinding 300 mm Grinding wheel dimensions: Ø x width Ø 300 x 125 mm (140) Regulating wheel dimensions: Ø x width Ø 225 x 125 mm (140) Grinding wheel peripheral speed 35 m/sec Grinding wheel infeed 3 mm Regulating wheel speeds, steplessly adjustable 0 – 444 rpm Regulating wheel inclination Degrees Grinding wheel drive approx. 7.5 kW Total connected load approx. 13 kW – 380 V – 50 Hz Weight 2,500 kg Bledpfx Amowftt Ujnji Accessories / Special equipment: • The machine operates with a fixed workpiece position, allowing both the grinding spindle and the regulating spindle units to be adjustable. This simplifies machine setup as well as automatic workpiece loading and unloading. • SIEMENS PLC control for automatic operation with SIEMENS touchscreen. Complete electrics and PLC control renewed in 2016! • Electromechanical profile dressing device for the regulating wheel • Regulating and grinding wheel speeds are steplessly adjustable. • Adjustable plunge guide bridge with mounted plunge workpiece rest • Electromechanically controlled workpiece pusher & automatic pneumatic workpiece ejector • Additional outfeed cylinder for automatic tilting of workpieces after plunge grinding (adjustable 4–30 mm) • Machine is prepared for use with a HELP-TEC bar loader MSHL08/400P, which is currently not present. • Complete enclosure of working area with monitoring technology • Separate control cabinet, operating and electrical manuals for the retrofit Condition: Very good! Fitted with new electronics in 2016! Click here for a video of the machine: Delivery: ex stock, immediately available, FCA Metzingen Payment: strictly net – after receipt of invoice Always a large selection of grinding machines in stock – please inquire for your requirements!

Condition: used, Year of construction: 2000, grinding diameter 360 mm grinding length 1600 mm centre height 180 mm internal diameter 0 mm grinding depth 0 mm swing diameter 0 mm Bsdpfx Ast Hw Rdjmnjli total power requirement 40 kW weight of the machine ca. 10000 kg dimensions of the machine ca. m K A R S T E N S (Germany) Universal “CNC” - Cylindrical Internal and Face Grinding Machine also for grinding excentric and cam profiles and polygons and even suitable for Threadgrinding Model K 51 – 1500 Year 2000 Serial No. 99 093 Height of centres 180 mm Distance between centres / grinding length 1,700/1.600 mm Cylindrical Grinding: Grinding Ø, approx. 5 - 360 mm Grinding wheel: Ø x width x bore 500 x 100 x 127 mm Grinding spindle speeds (35 m/s / 50 m/s) 1.900 / 2.200 rpm Drives of cyl./int/face spindle units 7.5/4,0/7,5 kW Grinding Wheelhead: 3 Positions = B-Axis Head swivels in 3 positions = 240 ° / 17,5 degree X-axis adjustment in total 360 mm Increments for infeed 0,001 – 125 mm Workpiece wheelhead = C-Axis Spindle speeds steplessly adjustable 10 – 1.000 rpm Spindle taper / Spindle bore MK 4 / 24 mm Table speeds 0,01 – 10.000 mm/min Total electrical load 40 kW - 400 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features: * Very versatile CNC Grinding Machine for almost all grinding purposes like External/Internal and Face grinding as well as for Excentric- / Cam- / Polygone Grinding and even for Thread Grinding * Free programmable CNC System make BWO Model 900 C with many grinding cycles and for easy input of the work-parameters. Graphic support, any many more features. * 3 position wheelhead with 3 Grinding spindles as B-Axis, one with measuring feeler (Z - Position) * MOVOMATIC Measuring Device Model ES 400 for diameter control, Probe head CR 60, to be mounted on table. * MPM Automatic Grinding wheel balancing Device, Dressing devices with diamantflees mounted on table surface and also motorized Diamantroll Profile dresser on table (for thread profiles, etc.) * Workhead and tailstock can be easily moved on table by air cushion. Hydraulic quill on tailstock. * No Coolant Device available ! Condition : Good to very good. Machine can be inspected under power. Delivery : Ex stock as inspected. Payment : Net, after conclusion of contract.

Condition: used, Year of construction: 1969, grinding length 500 mm grinding width 200 mm workpiece height 250 mm total power requirement 5,5 kW weight of the machine ca. 2500 kg dimensions of the machine ca. m J U N G Horizontal High Precision Surface- and Profile Grinding Machine Model HF 50 RD, Year 1969, partially reconditioned in 2021 Serial-no. 4082 _____ Grinding length max. 500 mm Grinding width max. 200 mm Table size 600 x 200 mm Grinding height under grinding wheel approx. 250 mm Table cross travel approx.. 230 mm Table slide cross stroke 0,2 - 8 mm/table stroke Table longitudinal travel max.. 550 mm Table speed longitudinal 1 – 20 m/min. Measurement of grinding wheel 225 x 25 x 51 mm Grinding wheel speed infinitely adjustable 1.000 - 4.500 rpm Vertical feed 0.001 - 0.01 mm/stroke Grinding spindle drive infinitely variable load 0,4 – 1,5 kW Total electrical load 5,5 kW - 380 V – 50 cycles Weight approx. 2.500 kg Accessories/Special Features: • Due to the infinitely variable speed range of the grinding wheel this design is especially suited for grinding of high alloyed steels and carbide, hardmetal, etc. • Set up switches for plunge-in or normal pendular-grinding with automatic infeed • Automatic infeed of grinding slide during surface- and/or profile grinding, (plunge-in cut)with automatic stop of infeed by contact-Gauge. • motorized rapid feed of grinding head up/down • Manual straight grinding wheel-dressing device mounted above the grinding wheel • Manual Table mounted, swivable magnetic chuck make BRAILLON size 400 x 200 mm • separate converter cabinet for infinitely variable speed regulation and with respective display of cutting speed in m/sec. • Wet grinding facility including coolant tank and bandfilter cleaning device, separate standing, • Including 3 separate flanges, some grinding wheels, service tools, etc. Condition : good – can be inspected here under power, partially Bledpfx Amot Hwzienji reconditioned by a JUNG Specialist (table pistons, lubrication, infeed system, Dresser, covers, etc.) Delivery : ex stock – as inspected Payment : net– after completion of contract

Condition: used, Year of construction: 1993, max. wheel diameter 330 mm Bjdpfet Hwyfsx Amneli gear width 180 mm total power requirement 12 kW weight of the machine ca. 7500 kg

Condition: used, Year of construction: 1997, max. wheel diameter 215 mm gear width 40,65 mm max. module total power requirement 20 kW weight of the machine ca. 10 t Max. external Ø of workpiece 215 mm Tooth profile, height x width 16 x 40.65 mm No. of teeth 5 - 200 Max. tooth ratio 1 : 10 Grinding wheel Ø 51 - 190 mm Grinding wheel speeds 1,000 - 6,000 rpm X Axis (horizontal) 152 mm Y Axis (vertical) 178 mm Z Axis (slide base plate) 304 mm Distance from middle of machine to middle of workspindle 115 mm Axial speed 125 mm/sec Workpiece speeds 0 - 30 rpm Workspindle bore, conical 3 29/32 inch Total electrical load 20 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features * FANUC CNC Control, Model 150 MB, for 7 axes, with monitor and direct input. Automatic calculation of all workpiece and grinding parameters. * Extensive coolant equipment with filter system, band filter, etc. * Driven grinding wheel dressing device with CNC dressing control for automatic compensation of form and diameter after every dressing. * Gear grinding is effected either in single component operation using a conical cup wheel (Gleason 30°), or with a cylindrical cup wheel. These grinding wheels can be made of CBN, or of traditional "dressable" aluminium oxide material (question of cost). Grinding with a conical grinding wheel is of advantage with regard to heat build-up and quality of tooth contact pattern. Therefore these pairs of bevel gears (for automotive industry) can be generated in high quality with consistent accuracy, economically, and with short set-up times. Condition : Very good - machine can be inspected here under power Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract Blsdst Hwxhopfx Amnei Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.

Condition: used, Year of construction: 1973, grinding diameter max. 30 mm regulating wheel width 12 mm max. width of grinding wheel mm total power requirement kW weight of the machine ca. t Bsdpfx Amet Hwwwsneli dimensions of the machine ca. m

Condition: used, Year of construction: 1982, x-travel 0 mm y-travel 0 mm table length 600 mm table width 400 mm total power requirement 2 kW weight of the machine ca. 1500 kg Blsdpst Hwr Uofx Amnoi

Condition: used, Year of construction: 1979, workpiece diameter 320 mm threading length 300 mm thread pitch mm total power requirement 90 kW weight of the machine ca. 12000 kg Blodpfxet Hwnps Amnji dimensions of the machine ca. m Thread and worm grinder for steering worms

Condition: used, Year of construction: 1980, max. wheel diameter 2500 mm gear width 1200 mm max. module 32 min. module 3 total power requirement 25 kW weight of the machine ca. 60 t dimensions of the machine ca. m Gear , min. / max. 180 / 2,500 mm Module 3 - 32 Helix angle, max. 10 - 35 ° Gear width for straight gears 1,200 mm Stroke length, approx. 100 - 1,200 mm No. of strokes 80 - 350 /min Stroke position adjustable 300 mm Stroke speed 4 - 40 mm Max. weight of workpiece, approx. 18,000 kg Min. / max. no. of teeth 16 / 576 Table size x bore 1,400 x 500 mm Grinding wheel Ø, approx. 500 mm Grinding wheel peripheral speed 34 m/s Total electrical load, approx. 45 kW - 380 V - 50 Hz Weight of machine, approx. 60,000 kg Accessories / Special Features: * Hydrostatic guides in grinding slide, table and in all other guideways. * Completely covered working area with sliding doors. * Automatic grinding process for various cycles, with settings for roughing, finishing, fine finishing and automatic dressing cycle after preset number of teeth. * Profile correction is possible via appropriate dressing, as well as additional movement of grinding slide (depth and width crowning). * Approx. 50 change gears. * Grinding slideTilt display device. * Large coolant device with band filter and oil mist exhaust. * Separate switch cabinet. * Separate hydraulic unit. * Separate oil cooling unit. Blodpfjt Hwqqox Amnoi Condition : Very good. Machine can soon be inspected in our showrooms. It is not under power at present. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. The machine comes directly from a first class gear factory, where it was grinding Quality 5 - 6. Grinding diagrams are available. This type and quality of machine is rarely available. Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.

Condition: excellent (used), Year of construction: 2005, operating hours: 8,000 h, functionality: fully functional, travel distance X-axis: 4,120 mm, travel distance Y-axis: 2,310 mm, For sale: Intermac Master 45 glass/stone processing machine, the largest unit ever produced. The machine was manufactured in 2005, with approximately 8,000 operating hours (including only about 100 hours dedicated to stone processing). The company is offering this machine for sale due to relocation and modernization of its machinery fleet. Condition: The machine is in very good condition—protected against corrosion and has undergone a comprehensive overhaul. Most hoses and lines have been replaced, all leaks sealed, filters changed, coolant and lubricants replaced, axis brakes changed, door wheel bearings and control unit fuse replaced, as well as air hoses and both suction and return hoses for the vacuum pump. Technical water pump hoses, clean water hoses, and filters have also been replaced. The radiator has been professionally cleaned, the lubrication system has been cleaned, and the coolant and lubricant tanks refilled. Operational status: The machine is fully functional and ready for immediate use. Professional geodetic measurements (laser scanning, photogrammetry) were conducted to verify machine geometry. Technical specifications: 1. Working area: 4.12 × 2.31 meters 2. Software: ICam 3. Suction cup set: 160 mm round (2 pcs), 120 mm (2 pcs), 90 mm (2 pcs) 4. 3 reference starting points 5. Stone-processing tools included: 5 ISO40 tool holders, 45 mm cutting mill, 20 mm diameter bit, “0” surfacing mill, set of 5 polishing pads, 35 mm hole saw, 120° lettering engraver—all tools are very lightly used. The machine is currently assembled and operational. It is a well-maintained, rust-free unit in full working order (interested buyers can request videos of the machine in operation). Throughout its lifespan, the machine has been stored in a dry, heated industrial facility. Buyer is responsible for disassembly and transportation. Disassembly services can be arranged upon prior agreement if needed. A VAT invoice will be issued. The listed price is NET. Possible disassembly date: From 10/02/2026 onward. Bljdpfx Ameymgflonoi Additionally, a Renner 15 kW compressor with a 500-liter pressure buffer tank can be purchased. Preferred contact method: email.

Condition: new, The Cowley 150x2000 mm belt sander is a professional machine designed for sanding, smoothing, and polishing metal, wood, and plastic workpieces. Thanks to its powerful 4 kW motor and high belt speed, this sander ensures fast, precise, and efficient processing, even of large-sized workpieces. Its robust construction and reliable operation make it ideal for intensive industrial use as well as professional workshops. Features: Suitable for sanding and polishing metal, wooden, and plastic workpieces. Powerful 4 kW motor ensures continuous and efficient operation. High belt speed – 29 m/s for fast and smooth surface processing. Strong and stable construction designed for long-term and intensive use. Perfectly suited for professional workshops and industrial applications. Technical Specifications: Power supply: 400V / 50Hz Motor power: 4 kW Belt speed: 29 m/s Belt dimensions (width × length): 150 × 2000 mm Noise level: 87 dB Product Dimensions: Length: 700 mm Width: 530 mm Bjdpfx Amjzd E S Renoli Height: 1130 mm Weight: 90.0 kg Packaging Dimensions: Length: 850 mm Width: 550 mm Height: 1060 mm Weight: 103.0 kg

Year of construction: 2001, condition: ready for operation (used), A conventional Studer universal cylindrical grinding machine is available. Center distance: 400mm, center height: 100mm, swing diameter: 200mm, external grinding diameter: 190mm, grinding length: 400mm, max. workpiece weight: 20kg, internal grinding diameter: 100mm, internal grinding depth: 130mm, X/Z travel: 30mm/420mm, Z feed: 3500mm/min, grinding wheel diameter: 350mm, grinding wheel width: 50mm, grinding wheel bore: 127mm, table swivel: 30°, machine dimensions X/Y/Z: approx. 2800mm/1400mm/1500mm, weight: approx. 1800kg. Including a Streuli SPB3-S20 filter system, year of manufacture: 2001. An on-site inspection is possible. Bodpfx Aozh Nhkjmnsli

Condition: reconditioned (used), Year of construction: 1998, functionality: fully functional, grinding length: 2,200 mm, grinding width: 500 mm, grinding height: 450 mm, grinding wheel diameter: 400 mm, table speed: 30,000 mm/min, table length: 2,200 mm, table width: 500 mm, grinding wheel width: 100 mm, spindle speed (max.): 4,000 rpm, overall weight: 10,000 kg, rapid traverse X-axis: 30 m/min, warranty duration: 12 months, Precision surface grinding machine, 2200 x 500 mm, workshop-refurbished with a 12-month warranty, available immediately. Includes delivery, commissioning, service, and spare parts, all from a single source. Custom-made by Mägerle with a narrow, semi-enclosed cabin for a Swiss customer. Magnetic table 2200 x 500 mm CNC control system Sinumerik 840 D Grinding wheel drive 25 kW Grinding wheel diameter x width = 400 x 100 mm Peripheral speed 45 m/sec (can also be retrofitted for CBN up to 8,000 rpm upon request) Feed rate range (X / Y / Z) 30 / 3 / 3 mm/min Smallest increment 0.001 mm Bledpjzbyp Tefx Amnoi Balancing device Dittel MBA 5000 Total power requirement 82 kVA Machine weight approx. 12 t Space requirement approx. 6.00 x 3.00 x 2.80 m

Condition: good (used), Machine is in good working condition. Bjdpfx Ajwu Exnemnsli

Year of construction: 2000, condition: used, grinding diameter max. 600 mm regulating wheel width 600 mm max. width of grinding wheel 600 mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Spindle set consisting of spindle shafts for mounting of grinding and also Bljdpfx Aefp U Ugemnsi regulating wheels suitable for a LIDKOEPING CL 660. A number of sets are available.

Year of construction: 1997, condition: used, grinding length 1250 mm grinding width 350 mm workpiece height 450 mm CNC control Sinumerik 840D rotary table dia. 1200 mm Table dimensions 2 x (760 x 325) mm longitudinal stroke 800 mm vertical movement of grinding slide 450 mm cross movement of grinding slide 350 mm Distance table / spindle centre (horizontal pos.) 600 mm grinding motor 50 kW grinding wheel size 400 x 160 mm feed range (X /Y/ Z) 30 / 3 / 3 m/min min. input value 0,001 mm turning speed range 200 - 4000 U/min total power requirement 82 kVA weight of the machine ca. 16 t dimensions of the machine ca. 7,00 x 3,30 x 3,00 m Bloded Tcnlopfx Amnoi Machine is sold as partially overhauled! MAEGERLE MGC Series are famous about various unique features: -Smooth slow and fast column motion and accurate positioning -Thermal stability by hydrostatic return oil circuit through machine base -Super precision -High stiffness and rigidity -Main spindle motor KESSLER 50kW. Our MGC is equipped with 180° swivel table diameter 1200 mm(FIBRO) and travelling column. The reason is to be able to make parts handling during the grinding operation. Accessories: Table dressing device, KNOLL HF 500/4000 water filtering unit with high pressure pump

Condition: used, Year of construction: 1976, grinding length: 350 mm, grinding width: 150 mm, total height: 2,150 mm, total length: 1,200 mm, total width: 1,100 mm, grinding wheel diameter: 175 mm, table length: 400 mm, table width: 150 mm, spindle speed (min.): 2,800 rpm, grinding spindle motor power: 750 W, power: 0.75 kW (1.02 HP), Surface grinding machine, SONY digital readout, manual and automatic feed, manual magnetic chuck 350x150 mm, grinding wheel dresser, coolant system Bsdpoxq Abijfx Amnjli

Condition: excellent (used), functionality: fully functional, actuation type: mechanical, number of rollers: 3, overall weight: 5,000 kg, Equipment: documentation/manual, Profile Bending Machine PARMIGIANI Mod. MERCORI – M. Used. Three-roll horizontal profile bending machine. Immediately available while stocks last. Visualized adjustment control. Supplied complete with tooling for bending flat bars and tubes. New electrical cabinet. User and maintenance manual included. Bending capacity: angle 120 x 120 x 12: min. Ø 1200 mm; U 160 vertical: min. Ø 1000 mm; Flat bar vertical 140 x 40: min. Ø 1000 mm; Flat bar horizontal 120 x 30: min. Ø 1600 mm; Tube 4″: min. Ø 1200 mm. Weight: 5000 kg. Motor power: 380 V, 12 Hp. Bedpfx Ameyxwdweneli

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, overall weight: 1,700 kg, Equipment: documentation/manual, Universal machine COMEC RCG 900 for reconditioning cylinder heads, engine blocks, drums, and discs for cars and trucks. Planing width: 320 mm Planing length: 900 mm Bjdpfxey Rffyo Amneli Maximum working height: 370 mm Maximum table travel: 1200 mm Feed rate: 0.8 - 450 mm/min Maximum brake drum diameter: 1400 mm Head motor: 5.5 Hp Brake machining speeds: 35-70-50-100 rpm Approximate weight with accessories: 1700 kg Dimensions: 2300 x 790 x 1700 mm (h)

Condition: used, functionality: fully functional, machine/vehicle number: 36/060401177, Fully functional and in very good condition. Blsdpozdz Uzefx Amnei

Condition: reconditioned (used), Year of construction: 2026, SCHAUDT E450x1500 cylindrical grinding machine, following a complete overhaul and modernization to a CNC grinding machine. The machine has geometrical acceptance parameters in accordance with WOT acceptance conditions. Safe operation of the grinding machine is ensured by a semi-enclosed cabin and all electrical and mechanical safety devices in compliance with CE standards. SCHAUDT E450 x 1500 1. Nominal grinding length – 1,500 mm 2. Maximum length of workpiece clamped in centers – 1,623 mm 3. Maximum grinding length – 1,540 mm 4. Center height – 150 mm 5. Maximum weight of workpieces clamped in centers – 200 kg Blsdpfx Aezfyw Remnji 6. Maximum permissible weight of workpiece clamped in a chuck – 50 kg 7. Grinding machine length – 5,600 mm 8. Grinding machine depth – 2,600 mm 9. Grinding machine height – 2,000 mm 10. Center height above the floor – 1,020 mm 11. Total weight – 5,200 kg 12. Total power consumption – 15 kVA 13. Total travel in the X-axis – 300 mm 14. Rapid traverse speed of the grinding wheel (JOG) AUTO – 750 / 1000 m/min 15. Grinding wheel spindle speed - non-adjustable – 1,430 rpm 16. Grinding wheel feed rate in the X-axis in INC mode: Min – 0.001 mm Max – 0.1 mm 17. Grinding wheel feed rate in the Z-axis in INC mode: Min – 0.001 mm Max – 0.1 mm 18. Feed rate range in plunge grinding mode – 0.06-20 mm/min 19. Total travel of the spindle base – 300 mm 20. Power of the grinding wheel drive motor – 7.5 kW 21. Grinding wheel peripheral speed – 32 m/s 22. Diameter of the new grinding wheel – 500 mm 23. Bore for mounting the grinding wheel – 203 mm 24. Maximum workpiece diameter when clamped in collets – 0.5-20 mm 25. Workpiece spindle speed range – 1-400 rpm 26. Power (torque) of the workpiece spindle drive motor – 1.9 (11) kW(Nm)

Condition: new, Year of construction: 2026, grinding length: 1,000 mm, grinding width: 500 mm, GENERAL Work table surface area: 500x1000 mm Maximum grinding width with overhang: 500 mm Maximum grinding width without overhang: 650 mm Maximum grinding length: 1000 mm Maximum distance between spindle axis and table surface: 600 mm TABLE Table speed, continuously adjustable range: 2-12 m/min Minimum table feed: 120 mm COLUMN Maximum transverse travel: 575 mm Range of automatic intermittent transverse feed: 0.1-30 mm Range of continuous transverse feed speed: 0.1-2.5 m/min SPINDLE HEAD Bljdpfx Ajzfyv Tjmnei Rapid feed speed: 3 m/min Range of automatic feed: 0.002-0.06 mm GRINDING WHEEL Maximum/minimum diameter: 500/300 mm Nominal width: 75 mm Maximum width: 100 mm Bore diameter: 203 mm Rotational speed: 1450 rpm MOTORS Grinding wheel drive: 11 (15) kW Pump drive: 5 kW Grinders can be manufactured with the following table sizes: 300x800 / 400x800 / 300x1000 / 400x1000 / 300x1500 / 400x1500 / 500x1000 / 600x1200.