Surface Grinding Machine

FUM SM30

Condition: good (used), BSTA 30 / 600 spm Bruderer Feed BBV 120/60 Press force max. 300 KN Power consumption from 1.5 to max. 5.5 KW Technical Air 6-10 bar Operator’s instruction Bed opening 250 mm +/-20mm Stroke: 8-40 mm Strokes per minute.: Max. 600 spm variable from 100-600 spm With Automatic central lubrication Main shaft cooler Pneumatic clutch and pneumatic brake Three working mode Programmable speed and number of strokes, Reverse flywheel mode Feeding of strip from left to right or right to left Strip pushing or pulling Roll feed BRUDERER BBV Strip width ca. max. 190 mm Feeding pitch ca. max. 60 mm Strip max. thickness 3,5 mm Distance between columns 325 mm Table height from floor 1000 mm Table surface area 540 x 300 Hole in the table 315 x 110 mm Ram surface dia. 250 mm Weight ca. 3.000 kg Dimension ca. 1100 x 1.400 x 2.200 mm Feed pitch up to max. 60 mm adjustable, highly accurate(tol. 0.02 mm) Itododa Ha Nopfx Adlsl Emergency stop and all other CE safety guards and relays Indexing per minute, infinitely variable Automatic in feed, fully synchronized with punching moment More high speed presses on stock made by Bruderer models BSTA 18, 20, 30, 200, 50 and Schaal and Mabu presses

Condition: excellent (used), Year of construction: 2004, Conveying and dosing equipment Brand: A. Tschritter Type: WC 100 Itodpfx Asd Twgcedlel Year of manufacture: 2004

Condition: good (used), Granule dryer, granule drying system, granule conveyor, vacuum conveyor -Manufacturer: Digicolor, granule conveyor vacuum conveyor -Type: unfortunately without type designation -Housing: material VA -Individual components/dimensions: see photos / technical. drawing -Total dimensions: 930/870/H2880 mm -Transport dimensions: 930/870/H2280 mm Iedopz Sgfopfx Adlotl -Weight: 141 kg

Condition: excellent (used), Year of construction: 1994, total length: 2,950 mm, total width: 2,100 mm, feed length X-axis: 650 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, workpiece weight (max.): 400 kg, feed rate X-axis: 5,000 m/min, feed rate Z-axis: 5,000 m/min, grinding wheel diameter: 350 mm, table length: 600 mm, table width: 400 mm, Digital read out system position slides 5 stones and flanches Coolant and Filtration system CE Mark Levelling pads included  Full set off books  X - Travel: 650mm Y - Travel: 400mm Z - Travel: 400mm Table Length: 600mm Table Width: 400mm Table load: 400 Feed rate X-Axis: 0-5000mm/min. Feed rate Z-Axis: 0-5000mm/min. Grinding stone dimensions:350 x 127 x 50mm Power: 6kW Speeds: 1400Rpm Cooling system: Yes Feed rate Y-Axis: 0-5000mm/min. Length: 2950mm Width: 2100mm Height: 2000mm Weight: 2550kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Itodpfx Aoyvhxmjdlsl

Condition: reconditioned (used), functionality: fully functional, ram adjustment: 40 mm, installation height: 2,500 mm, pressing force: 30 t, stroke length: 40 mm, High Speed Automatic Punching Press. Machine with CE certificate and EUR1 certificate of European origin. Equipped with twin synchronized double rolls feeds for strips widths from 5 mm – 150 mm. PLC touch screen logical interface control. Numerically controlled stamping process (NC). Itedpfx Adsvkfmrolsl With stroke and speed counter, programmable length, auto stop. Three working modes: Manual, One stroke and Automatic. Pneumatic clutch and brake. Operator’s instruction manual in English. Stroke power: 300 [KN] (30 [tons]). Adjustable stroke: 8-40 [mm]. Table: 540 x 300 [mm]. Adjustable speed 100 – 600 strokes per minute up to 10 in one second. Maximum strip thickness 2.5 [mm]. Central lubrication. Power consumption 5.5 [kW] Technical Air 5-10 [bar]. Warranty: 1 year. Two feeders are used when you need to stamp very thin, soft strip or very heavy strip, to secure precise feeding. All specifications non-binding , subject to change without notice.

Condition: excellent (used), Year of construction: 2011, BATTENFELD 35/75 PLUS INJECTION MOLDING MACHINE Technical specifications: Year of manufacture: 2011 Operating hours: 89,192 h Clamping force: 350 kN Itsdpfx Adjy Uk Axelel Injection volume: 25.4 cm³ Injection shot weight: approx. 23–27 g PS Screw diameter: 18 mm Maximum mold opening stroke: 200 mm Column spacing: 270 x 260 mm Platen dimensions: 470 x 280 mm Minimum mold height: 150 mm Centering hole diameter: 110 mm Maximum injection pressure: 2034 bar Hydraulic oil volume: 125 dm³ Total power: 28 kW Machine weight: 1050 kg Machine type: hydraulic Control system: BATTENFELD UNILOG B2 The machine is in very good technical and visual condition. A larger number of machines in the same configuration are available – a total of 12 units manufactured in 2010–2011.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 132517-100, clamping force: 350 kN, screw diameter: 25 mm, clearance between the columns: 270 mm, displacement volume: 49 cm³, injection pressure: 1,531 bar, injection weight: 44 g, mold height (min.): 150 mm, ejector stroke: 80 mm, opening stroke: 350 mm, plate length: 400 mm, plate width: 400 mm, total length: 3,100 mm, total width: 1,000 mm, total height: 1,800 mm, overall weight: 1,100 kg, heating capacity: 5.5 kW (7.48 HP), pressure: 215 bar, pump power: 7,500 W, power: 20 kW (27.19 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 48 A, Model: Injection Molding Machine Type: PLUS 35 Year: 2010 Ijdpfx Adsyw Ufvslotl Weight: 1100kg Control Voltage: 24 V DC Main Motor FLA: 14,7 A Hydraulic System Pressure: 250 bar Manufacturer: Wittmann, Austria

Condition: new, Year of construction: 2026, NDS 2 • Aluminum profile construction • Adjustable angle/tilt • Length of inclined part: 1300 mm • Usable width: 350 mm • Loading length: 600 mm • Separating length: 800 mm Isdpfx Adjwktn Aelstl • Minimum height (H min): 600 mm • Maximum height (H max): 1000 mm • Separator with blades included

Year of construction: 1975, condition: good (used), Includes FP3L milling machine head with adjustable angle table, vertical milling head, SK 40, S20x2 spindle mount. In good, operational condition. Can be demonstrated under power by arrangement. Iedpfx Adoildwxeljtl

Condition: excellent (used), Year of construction: 2005, Wittmann temperature control unit TP-PLUS-2:90+Option Available 2x PIECES Itjdperdzbaefx Adljl Year 2004