Used Biesse Mod.pe302A 8 Out for sale (39,825)

Condition: used, machine/vehicle number: 008562, X axis working area: 2465 mm Y axis working area: 1260 mm Working Table: Flat table Main Electrospindle power: 13.2 KW Number of controlled axes: 3 axes Total number of drilling spindles: 10 Total number of tool changer positions: 16 Lrodpfxszvwils Ab Uet

Condition: excellent (used), DEWETRON DEWE3-PA8-RM Power Analyzer Manufacturer: DEWETRON System: DEWE3-PA8-RM Chassis Type Plate: DEWE3-RM8 Revision: 1.1 Device Type: High-End Power Analyzer Design: Stationary 19" Rack-Mount Power Analyzer Country of Manufacture: Austria For sale is a professional DEWETRON DEWE3-PA8-RM Power Analyzer in a 19" rack-mount design, with a built-in TRION3-1810M-PA power module, as well as the connection and measurement accessories shown in the pictures. This modular measuring system is designed for highly precise power analysis and integration into test benches. Typical applications include electric drives, inverters, energy storage systems, e-mobility, power electronics, as well as research and development test benches. Technical data: System: DEWE3-PA8-RM TRION(3) slots: 8 Installed power module: TRION3-1810M-PA Current configuration: 4-phase power analysis Lredpfezyl Sijx Ab Ujt Measurement channels power module: 4 x voltage / 4 x current Sampling rate: up to 10 MS/s per channel Basic accuracy power analysis: 0.04% High voltage inputs: 4 x U1–U4 Voltage measurement range power module family: up to 1000 V RMS / ±2000 V Peak Safety category: CAT III 1000 V Supply: 100–240 V AC Frequency: 50–60 Hz Power consumption according to type plate: 500 W Sensor supply: Integrated redundant sensor supply ±15 V / 5 A +9 V / 0.6 A 8 sensor connections Equipment: TRION3-1810M-PA power module 4 high-voltage measuring inputs U1–U4 4 current / measuring channels I1–I4 CNT1 / CNT2 TRIG DC / AUX / Digital I/O SYNC IN / SYNC OUT Integrated industrial PC Interchangeable drive bays Ethernet / LAN USB interfaces COM1 / COM2 Display interfaces Free TRION(3) slots for expansion Application areas: Power analysis and power measurement Test bench technology Electric motors and electric drives Inverter and converter testing Battery and energy storage testing E-mobility / Automotive Power electronics Research and development Dimensions: Dimensions: 442 x 435 x 222 mm Weight: 15.8 kg Condition: Used Device can be switched on. Optical condition as shown in the pictures. Scope of supply: 1 x DEWETRON DEWE3-PA8-RM / DEWE3-RM8 1 x built-in TRION3-1810M-PA power module Measurement, sensor, and connection cables as shown in the pictures 2 x brackets as shown in the pictures Otherwise, scope of supply as shown in the pictures Shipping via UPS freight possible. Availability: upon agreement. Subject to changes, errors and prior sale.

Condition: used, mileage: 3,32,000 km, power: 346 kW (470.43 HP), first registration: 03/2013, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, gearing type: semi-automatic, Year of construction: 2013, Equipment: ABS, crane, electronic stability program (ESP), parking heater, RENAULT KERAX 460 – FLATBED WITH CRANE – 8 X 4 – SIDE BOARDS – 10.2M CRANE – WITH CRANE JIB – * VEHICLE HISTORY * VIDEO AVAILABLE UPON REQUEST * IMMEDIATELY READY FOR USE / CRANE & TRUCK * VEHICLE HAS FRENCH DOCUMENTS Lredpfx Aozw Sb Eeb Uet VEHICLE EQUIPMENT * AUTOMATIC TRANSMISSION * ENGINE BRAKE * CRUISE CONTROL * DIFFERENTIAL LOCK * REVERSING CAMERA * LEAF SPRING SUSPENSION * HMF CRANE WITH CRANE JIB * CRANE TYPE: 2200-K3, YEAR OF MANUFACTURE: 2013 * 10.2 M LONG * CRANE CAN BE OPERATED MANUALLY AND VIA REMOTE CONTROL (REMOTE CONTROL NOT INCLUDED) * 7 M LONG * 2.48 M WIDE * 1 M SIDE BOARD HEIGHT * FLATBED HAS A METAL FLOOR * 1 TANK * PERMISSIBLE TOTAL WEIGHT: 32,000 KG * UNLADEN WEIGHT: 16,360 KG * PAYLOAD: 15,640 KG * TIRE SIZE: 12R22.5 * GOOD TIRES * EXPORT SALES ONLY WITH DEPOSIT MIN. 500 EUR - 2000 EUR * EXPORT SALES ONLY WITH DEPOSIT MIN. 500 EUR - 2000 EUR * EXPORT REGISTRATION CUSTOMS EXW IN 10 MINUTES (APPROVED EXPORTER) 5 DAYS, 15 DAYS, 30 DAYS REGISTRATION, AND 15 DAYS AUSTRIAN REGISTRATION EURO 1 TECHNICAL DATA SHEET * VEHICLE RESERVATIONS SHOULD ONLY BE MADE VIA THE E-MAIL FUNCTION. VERBAL RESERVATIONS ARE NOT VALID. * For sales to the EU & third countries, a deposit of at least EUR 500.00 / EUR 1,000.00 will be charged. * Subject to change, errors and prior sale! More vehicles can be found on our website. Sales are exclusively made according to our general terms and conditions - see homepage. * Important note - Important information: Despite careful checking of all details in our offer, errors may occur. Some of these are caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is without guarantee and does not constitute a legal claim. * Legal: This sales advertisement does not constitute an offer in the sense of Section 145 of the German Civil Code (BGB). Rather, it provides information for the initiation of a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.

Condition: used, machine/vehicle number: 008689, X axis working area: 6735 mm Y axis working area: 1650 mm Working Table: Pod and Rail Main Electrospindle power: 13.2 KW Lrjdpfxeznuxbe Ab Ujt Number of controlled axes: 4 axes Maximum edge height: 65 mm Total number of drilling spindles: 30 Total number of tool changer positions: 22

Condition: used, Technical Data Machining Area - X = 3200 mm - Y = 1250 mm Workpiece Dimensions - Length X: 200 - 3200 mm - Height Y: 35 - 1250 mm - Thickness Z: 8 - 60 mm - Maximum workpiece weight: 50 kg Workpiece Reference System The preliminary positioning of the workpiece in the longitudinal direction (X-axis) is performed in the loading area on the left side of the machine by means of a stop, which is placed in a fixed position in the work table. Workpiece Positioning Unit The workpiece positioning system in the X-axis is achieved by two clamping jaws that hold the workpiece during the machining process. The movement is controlled by two independently driven servomotors. Workpiece Support Surface The workpiece support surface, on which the machining units are located, consists of a series of rubber-coated rollers that form the workpiece reference in the Z-axis. On the opposite side of the machining unit, a counter-pressure system is installed, which optimally holds the workpiece in the machine. Converter and voltage connection for voltages of 380 - 415 V (+-10%), 50/60 Hz Air conditioning unit for the electrical control cabinet bSolid control system HP kit for the rapid movement of the workpiece clamping jaws The combined system, with servomotor and precision planetary gearbox, enables movement speeds of up to 110 m/min with fast acceleration ramps. Consent pedal for opening/closing the clamping jaw BH28 drilling head with individually addressable spindles - 17 vertical spindles (7 in the X-axis, 10 in the Y-axis) - 5 horizontal spindles (3 in the X-axis, 2 in the Y-axis) - 1 dado blade unit with a fixed working direction in X 11 kW electric spindle with HSK-F adapter with "C" axis torque - 11 kW, 24000 rpm in S1 operation - 6000 - 24000 rpm programmable via NC Angle saw unit HSK F63 for saw blade - Max. speed 8,400 rpm Drilling and milling unit for top and bottom edges / end drilling and milling unit - Max. speed 9,000 rpm - Tool holder with ER20 collet 8-position tool changer magazine - disc changer Accessory kit "Sensitive Surfaces" for workpiece transport Laser device for manual reading of QR codes SOPHIA - IoT Connection Dowel Ø8x40 mm and glue insertion unit Barcode2Hops with variables Lrsdpfx Abozutras Uot MultiPost upgrade POST_Element Splitter NC-Hops 7.0

Condition: used, machine/vehicle number: 008564, X axis working area: 2465 mm Y axis working area: 1260 mm Working Table: Flat table Lsdpfx Abszvwh Ie Uert Main Electrospindle power: 13.2 KW Number of controlled axes: 3 axes Total number of drilling spindles: 10 Total number of tool changer positions: 16

Condition: reconditioned (used), functionality: fully functional, operating pressure: 180 bar, empty load weight: 159 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, KARCHER HDS 8/18-4M HOT WATER WASHER NEW DRIVE (MOTOR BLADE) The device features new accessories, including a German R+M gun, stainless steel lance, steel-braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient, low-speed three-phase motor ensures stable operation even during prolonged use. With operating parameters of 180 bar and 800 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Model HDS 8/18-4M Power supply voltage 400V ~ 3 phases Pumping capacity (l/h) 400 - 800 Operating pressure (bar) 30 - 180 Max. Water heating temperature (°C) 80-155 Connection power (kW) 5.5 Fuel tank capacity (l) 25 Cleaning agent tank capacity (l) 20 + 10 Pressure hose length (m) 10 Lrodezlqrljpfx Ab Uet Weight (kg) 159 Dimensions (L x W x H mm) 1330 x 750 x 1060 EQUIPMENT: NEW DRIVE (ENGINE BLADE) NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - No operating time limits Two built-in chemical tanks allow for dispensing cleaning fluid directly through the machine A clearly laid-out and intuitive control panel A simple design and easy access to individual components under the housing make the machine user-friendly and easy to service The RM110 water softener tank prevents corrosion and scale buildup inside the heating coil and other pipes. An exhaust gas temperature sensor shuts off the engine at temperatures exceeding 300°C When the eco!efficiency function is activated, the device heats water to 60°C, allowing for effective cleaning of even the most stubborn stains while reducing fuel consumption by approximately 20%.

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, Digital automatic drilling machine BIESSE SKIPPER 130 Lsdpfx Aborkm R Hj Uert Working condition. Free for loading.

Condition: used, Year of construction: 2005, 2005 | Iveco Trakker AD410T44 8×4 | Used Tipper Truck | 395935 kms 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 35400 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* Ledjzrm Dkjpfx Ab Uort 👷‍♂️ Inspected by an independent expert 45 inspection points 40 approved ✅ 5 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Good overall and operating condition. See detail below. Technical checks up to date until February 5, 2027. 13-liter engine with high torque, the gearbox works very well. Disc brakes on axles 1 and 2 (good condition) and drum brakes on axles 3 and 4. Trailer socket for signaling and ABS (no brake handles, GTWR 40T). The vehicle is first-hand with a complete history. Recent repairs: cylinder head gasket, flywheel, and clutch kit at 394360 km; gear linkage and steering ball joints at 373171 km; starter at 383861 km; axles and bushings for pivots on axles 1 and 2 at 297850 km. Gearbox overhaul at about 250000 km. Round dump body length 5800 mm. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40818 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 2,400 mm, travel distance Y-axis: 1,200 mm, number of axes: 3, overall weight: 1,700 kg, spindle speed (max.): 24,000 rpm, This 3-axis BIESSE ROVER J FT 1224 was manufactured in 2017, featuring a working area of 2400 mm by 1200 mm. It includes a CNC electrospindle with a maximum speed of 24,000 rpm, and a flat vacuum table ideal for routing, drilling, and panel machining. Consider the opportunity to buy this BIESSE ROVER J FT 1224 CNC Wood Machining Centre. Contact us for more information about this machine. Ljdpfx Abjzug N Ej Ujrt • Axes: 3 CNC-controlled (X, Y, Z) • Capabilities: routing, drilling, pocketing, panel machining • Air supply: 7.5 bar • Suction air speed: 30 m/s Additional equipment • Flat vacuum table with suction cups

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 7042, Selling a used Valon Kone debarking machine, with an Airseal rotor and 90 kW drive, 4 different knife pressure settings, 6 knives, 8 individually driven feed rollers, feed speed up to 120 m/min. Dismantling is planned for spring 2027. A large spare parts package is available and included in the price, consisting of feed rollers, comb strips, pneumatic and hydraulic cylinders, and knife arms. Lsdpfx Aoz Aq Eyeb Uert

Condition: ready for operation (used), Year of construction: 2002, cutting length (max.): 4,500 mm, This 4-axis BIESSE Selco WNTR 600 was manufactured in 2002. It features a maximum blade projection of 120 mm to 132 mm and cutting lengths of 3,200 mm, 3,800 mm, and 4,500 mm. The machine is equipped with a powerful main saw motor ranging from 13.5 kW to 18 kW and a saw carriage speed of up to 150 m/min. If you are looking to get high-quality panel cutting capabilities, consider the BIESSE Selco WNTR 600 machine we have for sale. Contact us for further details. • Max. blade projection: 120–132 mm • Cutting lengths: 3,200 / 3,800 / 4,500 mm • Main saw motor: 13.5–18 kW • Main saw blade diameter: 430 mm • Scoring saw blade diameter: 200 mm Ledpfjz Dhmuex Ab Uort • Saw carriage speed: up to 150 m/min (brushless drives) • Pusher speed: up to 90 m/min • Pusher grippers: independent pneumatic grippers • Control system: OSI (Open Selco Interface) / OSI Plus numerical control • Machine layout: angular panel sizing system with two orthogonal cutting lines for automatic rip and cross-cutting

Condition: used, mileage: 2,26,024 km, power: 103 kW (140.04 HP), first registration: 07/2018, fuel type: diesel, overall weight: 3,500 kg, color: yellow, gearing type: mechanical, emission class: euro6, number of seats: 8, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, INTERNAL VEHICLE NUMBER: M449 ----VW CRAFTER 2.0 TDI EURO 6----KM: 226,024 SERVICE BOOK MAINTAINED LAST SERVICE AT 185,783 KM ON 22.05.2024 ALL SERVICING CARRIED OUT BY A MANUFACTURER-AUTHORIZED WORKSHOP VEHICLE HISTORY AVAILABLE IN DIGITAL FORMAT ONE OWNER ----* START / STOP FUNCTION * HILL START ASSIST * CROSSWIND ASSIST * EMERGENCY BRAKE ASSIST (HBA) Lredjy N Ih Ujpfx Ab Ujt * AIR CONDITIONING * CRUISE CONTROL * SPEED LIMITER ----M+S TIRES ON STEEL RIMS----HEATED WINDSCREEN----ADDITIONAL HEATER----8-SEATER----DIGITAL TACHOGRAPH----TOW BAR WITH INTEGRATED STEP PERMISSIBLE TRAILER LOAD UP TO 3,000 KG----ERGO COMFORT SUSPENSION SEAT (DRIVER'S SIDE) COMFORT SEAT (PASSENGER SIDE)----SLIDING WINDOW ON DRIVER'S SIDE ----* NAVIGATION SYSTEM * BLUETOOTH * HANDS-FREE KIT * SD CARD * USB * APPLE CARPLAY * ANDROID AUTO * MULTI-CD CHANGER * ARMREST + LUMBAR SUPPORT (DRIVER’S/PASSENGER’S SIDE) * ELECTRIC WINDOWS * ELECTRIC & HEATED SIDE MIRRORS * FULLY ADJUSTABLE SEATS IN LOAD AREA * ON-BOARD COMPUTER * TOUCHSCREEN * VOICE CONTROL * LED LIGHTING IN DRIVER & LOAD AREA ----Special Equipment: * Storage Package 2 * Driver/Passenger Airbag * Passenger Airbag Deactivation * Discover Media Audio-Navigation System (Touchscreen Colour Display) * Electrically Adjustable and Heated Exterior Mirrors * Headliner * Driver Fatigue Detection Sensor * Digital Tachograph * Chassis: Reinforced Suspension and Anti-Roll Bars, Front and Rear * Sliding Window in Load/Passenger Area, Front Left * Window Package * 2 Folding Remote Keys * Vehicle Without Bulkhead * Vehicle Without Model Designation * Cruise Control with Speed Limiter * Side Marker Lights * Tire Pressure Monitoring System * Spare Wheel (Full Size) incl. Toolkit and Jack * Side Airbag / Curtain Airbag (Front) * Seat Upholstery: Artificial Leather * Comfort Passenger Seat in Cab * ErgoComfort Suspension Seat, 20-way Adjustable (Driver’s Side) * Front Bumper in Grey * Rear Step, Right * Half-Height Plastic Lining in Load Area * Additional Heat Exchanger * Auxiliary Heater (Air) Additional Features: * Convex Exterior Mirrors (Left and Right) * Integrated LED Indicators in Exterior Mirrors * Rubber Floor Covering in Driver’s Cab * Aerodynamic Underside Panel * Dual Headlights * Twin-tone Horn * Grab Handles on Rear Pillars, Left & Right * Hill Start Assist * Brake Assist (HBA) * Crosswind Assist * Electric Front Windows * Grab Handles on A-Pillars * LED Interior Lighting in Cab * LED Interior Lighting in Load/Passenger Compartment * Body Type: Panel Van * Body Variant: Standard Roof * Fuel Tank: 75 Litres * Upper Chrome Trim on Radiator Grille * Height/Reach Adjustable Steering Column * Headlamp Range Adjustment * Truck Registration * Engine: 2.0 Litre - 103 kW TDI * Rear Fog Lamp * Wheelbase 3640 mm * Tire Repair Kit * Low Emission According to Euro 6 * Sliding Door, Load/Passenger Area Right * SCR System (AdBlue Technology) * Electromechanical Power Steering * Start/Stop Engine System * 12V Power Sockets in Cab (x2) * Lashing Eyes in Load Area * Driver Seatbelt Warning System * Heat-Insulating Glazing * Central Locking with Remote Control & Interior Operation * Permissible Gross Weight 3.5 t UPRATING TO 3.5 T TRAILER LOAD POSSIBLE

Condition: used, Technical Data Workpiece Dimensions - Length: 90 - 3,000 mm - Width: 70 - 1,000 mm - Thickness: 8 - 60 mm Working Ranges X-Axis Lrjdpfezutrtex Ab Uot - Vertical Drilling: 0 - 3,000 mm - Horizontal Drilling (X and Y): 0 - 3,000 mm - Through Milling: 0 - 2,500 mm - Partial Milling: 0 - 3,000 mm - Through Grooving with Saw (X-direction): 0 - 2,500 mm - Partial Grooving with Saw (X-direction): 0 - 3,000 mm Y-Axis - Vertical Drilling: 0 - 1,000 mm - Vertical Drilling with 32-mm System: 32 - 1,000 mm - Horizontal Drilling in X: 0 - 1,000 mm - Horizontal Drilling in Y-direction: 90 - 1,000 mm - Milling: 0 - 950 mm - Grooving with Saw (X-direction): 112 - 1,000 mm Z-Axis - Material Thickness: 0 - 60 mm Equipment The machine is equipped with 78 independent drilling spindles, distributed across two mirror-image processing units: - 39 spindles in the upper unit - 39 spindles in the lower unit Each processing unit includes: - 29 vertical drilling spindles (19 along the X-axis and 10 along the Y-axis, 32 mm spacing) - 8 horizontal drilling spindles along the X-axis (4 with dual outlets) - 2 independent horizontal drilling spindles in the X-direction - 2 independent horizontal drilling spindles in the Y-direction - 3.5 kW HSK electro-spindle - Spindle speed: 6,000 - 18,000 rpm Optional Equipment - Roller loading table - Upper and lower work tables (pressure tables) - Upper and lower processing units - Right-hand side strip unloading conveyor - Electronic thickness control - Central automatic lubrication - PC-based CNC control (Windows XP 600 with Soft CN) - Safety system

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, workpiece height (max.): 60 mm, workpiece width (max.): 1,300 mm, workpiece length (max.): 3,200 mm, edge thickness (max.): 3 mm, Equipment: CE marking, TECHNICAL DETAILS Max. feed speed: 24 m/min Maximum panel thickness: 60 mm Minimum panel height: 10 mm Maximum panel height: 60 mm Ledjxw T Tpepfx Ab Uert Minimum panel length: 320 mm Maximum panel length: 3,200 mm Minimum panel width: 150 mm Maximum panel width: 1,300 mm Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Number of working units: 8 UNITS Trimming Unit 1 Function: Sizing Model: RT30 Motor Power: 3.5 kW Max. speed: 9,000 rpm Edge Processing Unit 1 Function: End Trimming Model: IT90-S Number of motors: 2 Max. processing speed: 28 m/min Motor power: 0.65 kW Max. speed: 12,000 rpm Edge Processing Unit 2 Function: Edge Milling Model: RF10 Number of motors: 2 Motor power: 1 kW Max. speed: 12,000 rpm Edge Processing Unit 3 Function: Multifunction Model: AR30 Number of motors: 2 Max. processing speed: 18 m/min Motor power: 0.65 kW Max. speed: 12,000 rpm Edge Processing Unit 4 Function: Profile Scraper Model: RB40 Edge Processing Unit 5 Function: Glue Scraper Model: RC20 Edge Processing Unit 6 Function: Brushing Model: SZ30 Number of motors: 2 Motor power: 0.37 kW Max. speed: 1,400 rpm MACHINE DETAILS Installed total power: 25 kW Dimensions Conveyor length: 12,300 mm Width: 1,300 mm Length: 12,300 mm EQUIPMENT Jointing cutters Multifunction unit Top pressure Pressure via rubberised belts Panel support guide NC positioning Angled panel infeed system Automatic engagement by time Edge preheating lamps Coil magazine Hot-melt glue pot Hot-melt glue pre-fuser Edge pressure roller conveyor Spray unit SINTRA machine programming software Panel discharge via roller transfer conveyor Panel feed via motorised carpet belt Return system for left-side edge bander CE marking

Condition: used, mileage: 1,96,075 km, power: 103 kW (140.04 HP), first registration: 07/2018, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 12/2027, color: yellow, gearing type: mechanical, emission class: euro6, number of seats: 8, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, INTERNAL VEHICLE NUMBER: M448----VW CRAFTER 2.0 TDI EURO 6----MILEAGE: 196,075 KM, SERVICE HISTORY AVAILABLE LAST INSPECTION AT 196,000 KM ON 12/2023 ALL INSPECTIONS WERE CARRIED OUT IN AN AUTHORIZED MANUFACTURER'S WORKSHOP!!! VEHICLE HISTORY AVAILABLE IN DIGITAL FORMAT 1ST OWNER----* START / STOP * HILL START ASSIST * CROSS WIND ASSIST * EMERGENCY BRAKING ASSIST (HBA) * AIR CONDITIONING * CRUISE CONTROL * SPEED LIMITER ----M+S TIRES ON STEEL RIMS----HEATED FRONT WINDSHIELD----AUXILIARY HEATER----8 SEATS----DIGITAL TACHOGRAPH----TOW HITCH WITH INTEGRATED STEP PERMISSIBLE TRAILER LOAD UP TO MAX. 3000 KG----ERGO COMFORT SUSPENSION SEAT ON DRIVER'S SIDE COMFORT SEAT ON PASSENGER SIDE----SLIDING WINDOW ON DRIVER'S SIDE ----* NAVIGATION SYSTEM * BLUETOOTH * HANDS-FREE SYSTEM * SD CARD * USB * APPLE CAR-PLAY * ANDROID AUTO * MULTI-CD CHANGER * PASSENGER SIDE/DRIVER SIDE ARMREST + LUMBAR SUPPORT * ELECTRIC WINDOWS * ELECTRIC SIDE MIRRORS+HEATED * ADJUSTABLE SEATS IN THE CARGO AREA * ON-BOARD COMPUTER * TOUCHSCREEN * VOICE CONTROL * LED LIGHTING DRIVER+CARGO AREA ----Special Equipment: * Storage Package 2 * Airbag Driver/Passenger Side * Passenger Airbag Deactivatable * Audio-Navigation System Discover Media (Touchscreen Color Display) Lrodpfx Aboycbide Ujt * Exterior Mirrors Electric. Adjustable and Heated * Roof Lining * Driving Assist System: Fatigue Detection Sensor * Digital Tachograph * Suspension: Damping and Stabilizers Reinforced Front and Rear * Window in Load/Passenger Compartment: - Sliding Front Left * Window Package * Remote Control Key (2) Folding * Vehicle without Cargo Area Partition * Vehicle without Type Designation * Speed Control System (Cruise Control) incl. Speed Limiter System * Marker Lights Side * Tire Pressure Control System * Spare Tire in Driving Condition incl. On-Board Tools and Jack * Side Airbag / Head Airbag (Curtain Airbag) Front * Seat Cover / Upholstery: Artificial Leather * Seats in Cab: Passenger Seat Comfort * Seats in Cab: Suspension Seat ErgoComfort * Driver's Side (Seat Adjustment 20-Way) * Front Bumper in Gray * Step Rear Right * Paneling in Load/Passenger Compartment: Plastic Semi-High * Heat Exchanger Additional * Auxiliary Heater * Additional Heater (Air) Additional Features: * Exterior Mirrors Convex Left and Right * Turn Signals LED Integrated in Exterior Mirrors * Floor Covering in Cab: Rubber * CW-Value Underbody Paneling * Double Headlights * Double Tone Horn * Door Handle on Rear Pillar Rear Left and Right * Hill Start Assistant * Brake Assistant (HBA) * Cross Wind Assistant * Power Windows Front * Grab Handles A-Pillars * Interior Lights in Cab: LED * Interior Lights in Load/Passenger Compartment: LED * Body/Structure: Box Van * Body Variant: Normal Roof * Fuel Tank: 75 L * Radiator Grille with Chrome Strip Above * Steering Column (Steering Wheel) Adjustable * Headlight Range Adjustment * Truck Approval * Engine 2.0 Ltr. - 103 kW TDI * Rear Fog Light * Wheelbase 3640 mm * Tire Repair Kit * Low Emission According to Emission Standard Euro 6 * Sliding Door Load/Passenger Compartment Right * SCR System (AdBlue Technology) * Power Steering Electro-Mechanical * Start/Stop System Engine * Sockets (12V Connection) in Cab (2 Pieces) * Tie-Down Rings Cargo Area * Warning System for Seatbelt (Driver Side) * Heat Protection Glazing * Central Locking with Remote Control and Interior Operation * Permissible Gross Vehicle Weight 3.50 t A WEIGHT INCREASE

Condition: used, Year of construction: 2006, Numerical Control XP 600 Working range on X-axis mm 3060 Working range on Y axis mm 1140 Working range in Z axis mm 160 N ° 2 work fields Bar worktop No. 6 adjustable bars for suction cup support No. of pneumatic bakelite bars for panel lifting (?) No. 2 adjustable suction cups for each bar with vacuum seal for fixing the panel during processing No. 1 vertical electrospindle with C-axis 12 kW motor 10-position tool change system - positioned on the drilling head of the machine, ISO 30 type cones BH19L drilling head with 18 spindles arranged as follows: - No. 7 verticals on X axis - N° 6 verticals in Y axis - N° 4 horizontal on X axis - No. 2 horizontals on Y axis - No. 1 independent blade group for making grooves on the X axis Front protection and safety system with photocells Automatic lubrication system (?) Air conditioning system for cooling and cleaning of machine control Vacuum pump mc/h 250 TECHNICAL DETAILS TO BE CHECKED Lrsdjv Aacfspfx Ab Ujt

Condition: used, axle configuration: 2 axles, first registration: 02/2011, total length: 5,790 mm, total width: 2,550 mm, suspension: steel-air, tire size: 315/70R22.5, wheelbase: 3,550 mm, color: brown, Year of construction: 2011, Equipment: ABS, = Additional Options and Accessories = - Anti-Slip Regulation (ASR) - Roof spoiler - Electric windows - Refrigerator - Sun visor - Cruise control = Notes = Scania P280 First registration: 25-02-2011. in combination with: Lredpfxowahwdj Ab Uot TRAVEL SUPREME INC First registration: 10-11-2006. Max weight: 9,000 kg. Trailer is used as a mobile training room. 2 x slide-out. Toilet. Kitchen. Stove. Ovens. Fridge. Heater. = Further Information = Tire size: 315/70R22.5 Brakes: Disc brakes Front axle: Steered; Tire tread depth left: 75%; Tire tread depth right: 75%; Suspension: Leaf spring suspension Rear axle: Double tires; Tire tread depth left inner: 80%; Tire tread depth left outer: 80%; Tire tread depth right inner: 80%; Tire tread depth right outer: 80%; Suspension: Air suspension Unladen weight: 7,470 kg Payload: 1,530 kg GVW: 9,000 kg Model number: P 280 + trailer - 2 X SLIDE OUT = Company Information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT), Govorim po ryccki. We make every effort to provide accurate information. However, no rights can be derived from the texts provided.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Working area X: 3640 mm Working area Y: 1342 mm Part clearance: 180 mm 12 kW C-axis electrospindle, ISO30 mounting Drill bits for vertical drilling: 24 Drill bits for horizontal drilling X: 6 Drill bits for horizontal drilling Y: 4 Saw blade for grooving in the X direction 12-position revolver tool changer Work table with 6 rails with EPS automatic positioning of the rails, vacuum cups Chip conveyor belt 1 vacuum pump with a capacity of 90 m3/h Safety mats Approximate weight: 4000 kg. Includes 3 aggregates (for door milling, mortising, etc.), vacuum cups, and some Uniclamps. Lrodpfxezmff No Ab Ust Only 1406 operating hours on the 4-axis electrospindle, and 831 hours on the drilling unit. Available from January 2027.

Condition: used, Year of construction: 2006, operating hours: 1,00,000 h, functionality: fully functional, feed rate X-axis: 30 m/min, workpiece weight (max.): 50 kg, working width: 1,400 mm, suction capacity: 48,000 m³/h, type of input current: three-phase, total height: 2,800 mm, total length: 68,000 mm, total width: 2,600 mm, working height: 75 mm, power: 720 kW (978.93 HP), input frequency: 50 Hz, input current: 1,800 A, operating pressure: 6 bar, workpiece width (max.): 1,250 mm, compressed air connection: 6 bar, complete lacquering line: 2x Heesemann sanders (LSM8 2006.12.141, 3rollers-3pads/ LSM8 2006112.151, 2pads) 2x Heesemann cleaning mach. (EA8 2006.12.142 / EA8 2006.12.152) 1x Cefla hot air drying tunnel (FEV EU2/8 6 IRM / TNSL) 4x UV lamps dryer ( 2lamps, UV 2000 M2+CRU+TN 4000/HT / 4lamps UV 2000 M2+CRU+TN 5000/HT / 2lamps / 4 lamps) 2x stain roller coaters ( Smartcoater M-EVO / model M) 2x heavy putty roller coaters (Smartcoater SP / SP1-EVO) Lrjdpfov Ta Tfex Ab Uet 3x lacuer roller coaters (Smartcoater MF) 10x belt/roller conveyors 2x hydraulic lifters (200-900mm height)

Condition: used, machine/vehicle number: 008496, X axis working area: 5920 mm Lrsdpfx Ajy H Dzfjb Ust Y axis working area: 1600 mm Working Table: Pod and Rail Main Electrospindle power: 16.5 KW Number of controlled axes: 5 axes Total number of drilling spindles: 23 Total number of tool changer positions: 34

Condition: used, machine/vehicle number: 008112, X axis working area: 3390 mm Y axis working area: 1535 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 5 axes Lrodjw Idgvspfx Ab Uet Total number of drilling spindles: 21 Total number of tool changer positions: 14

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning diameter: 20 mm, spindle motor power: 5,500 W, spindle speed (max.): 8,000 rpm, spindle bore: 25 mm, travel distance X-axis: 50 mm, travel distance Y-axis: 350 mm, type of input current: three-phase, bar passage: 20 mm, overall weight: 4,200 kg, spindle diameter: 20 mm, Equipment: documentation/manual, rotational speed infinitely variable, Steuerung: Fanuc 310i Hauptspindel Drehzahl: 10.000 U/min Leistung: 5,5 kW Drehmoment: 14 Nm Stangendurchlass: max. 20 mm C1-Achse: 0,001 Verfahrweg Z1-Achse: 80 mm Gegenspindel Bjjgsn8yaky Drehzahl: 10.000 U/min Leistung: 5,5 kW Drehmoment: 14 Nm C2-Achse: 0,001 Verfahrwege X2 / Z2-Achse: 240 / 300 mm Eilgang in X2 / Z2 Achse: 40 m/min Werkzeugträger I (X/Y) Technologie: Linearer Schlitten Innenbearbeitung: 6 Stationen Werkzeughalter: 20 mm Außenbearbeitung: 6 Stationen Werkzeughalter: 12 x 12 mm Angetriebene Werkzeugstationen: 5 Lrsdjzz I Dkjpfx Ab Uot Werkzeugantrieb: 3.450 / 6.000 U/min Werkzeugaufnahme: Spannzangenfutter, ESX 16 Verfahrwege in X/Y-Achse: 50/350 mm Eilgang in der X/Y-Achse: 40/30 m/min Stangenlader BOSS 332 E Werkzeugträger II (Y) Technologie: Linearer Schlitten Innenbearbeitung: 4 Stationen Werkzeugaufnahme: 20 mm Außenbearbeitung: 4 Stationen Werkzeughalter: 12 x 12 mm Angetriebene Werkzeugstationen: 5 Werkzeugantrieb: 3.450 / 6.000 U/min Werkzeugaufnahme: Spannzange, ESX 16 Verfahrweg in Y2-Achse: 120 mm Eilgang in der Y2-Achse: 40 m/min DETAILS ZUR MASCHINE Gewicht: 4200 kg Angeschlossene Last: 30 kVA Betriebsspannung: 400 V / 50 Hz AUSRÜSTUNG Spänemanagement: Späneförderer Kühlmittelmanagement: Kühlmittelpumpe Weitere Ausstattung: Signallamp

Condition: ready for operation (used), Year of construction: 2022, machine/vehicle number: 1000056636, functionality: fully functional, cutting width (max.): 3,200 mm, total length: 8,000 mm, overall weight: 3,969 kg, cutting length (max.): 3,200 mm, TECHNICAL DETAILS Max. cutting length: 3,200 mm Max. cutting width: 3,200 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 8,000 x 2,400 x 2,400 mm Weight: 3,969 kg Lredsy Nxvcspfx Ab Uot Supply voltage: 400 VAC Number of supply phases: 3 Power: 4 kW Frequency: 50 Hz EQUIPMENT Documentation CE marking

Condition: new, Year of construction: 2026, machine/vehicle number: EAN0729389556525, load capacity per storage section: 3,000 kg, total length: 22,400 mm, total height: 4,500 mm, clearance between the columns: 3,600 mm, shelf height: 4,500 mm, number of shelf rows: 2, frame height: 4,500 mm, frame width: 1,100 mm, load per truss pair (max.): 3,000 kg, shelf length: 22,400 mm, support length: 3,600 mm, 2 rows of pallet racking (M45113615-3) each 11.2 m long, 4.5 m high, 1.1 m deep, each with 3 bays, 3.6 m wide, each with 3 beam levels, load capacity 3000 kg. - 8 upright frames (RM4511 - RAL5019) - 16 base plates, shims, fastening material - 16 floor anchors (ZZBA1210) - 36 individual beams (T3615 - RAL2008) - 2 load capacity signs (BSMcP) Frames are bolted, not pre-assembled. Freight / Delivery: - max. 20 working days after payment receipt - delivery free to construction site / assembly location - unloading from the truck is carried out by the buyer using their own lifting equipment Lsdpfxszdcwre Ab Uert - deliveries are made to the entire territory of the Federal Republic of Germany; excluding islands! Deliveries to EU countries are subject to individual agreement.