Used Bizon Bottom Flattener for sale (3,001)

Condition: excellent (used), Catalogue number: 7840 TECHNICAL DATA - Max. workpiece width: 630mm - Max. workpiece height: 110mm - 2 units: 1) Grooved rubber roller for calibration 2) Grooved rubber roller for calibration + pad + metal roller - Top section: - Metal infeed roller, slip type - Unit - Metal slip roller - Unit - Metal slip roller - Bottom section: - 2 metal slip rollers - Feed belt - 2 metal slip rollers - Pneumatic oscillation of belts - 2 feed speeds - Motor: 2×7.5kW - Electric table lift - Operating pressure: 6-8 bar - Extraction port diameter: 2x160mm - Overall dimensions (LxWxH): 1650x1060x1970mm Lhjdjzr I Anjpfx Ahtek - Weight: 972kg ADVANTAGES – Polish-made – 2 processing units – Not repainted – Very good condition – Used sander Net price: 20,900 PLN Net price: 4,980 EUR (calculated at 4.2 EUR) (Prices may change with larger exchange rate fluctuations)

Condition: new, CATALOG NUMBER RE041 - New machine TECHNICAL DATA - Blade diameter ⌀250 – 350/30 mm - Scoring blade diameter (operation only with ⌀300, 350 mm blade) ⌀120/20 mm - Main motor power 4 kW - Scoring motor power 0.75 kW - Main spindle speed 4000 rpm - Scoring spindle speed 8800 rpm - Blade tilt 0 – 45° - Max. cutting length 2000 mm - Cutting width with rip fence 1250 mm - Riving knife ⌀350 mm - Spindle flange diameter 87.5 mm - Table fence settable at 90° – 45°, accuracy ±1° - Max. cutting height with ⌀300 mm blade: 95 mm - Max. cutting height with ⌀350 mm blade: 120 mm - Top extraction port diameter ⌀80 mm - Bottom extraction port diameter ⌀100 mm - Weight 620 kg - Machine dimensions (L/W/H) 2255x3460x1450mm Net price: 19,900 PLN Ljdpfx Aozr Ix Nehtohk Net price: 4,740 EUR Net price calculated at 4.2 PLN/EUR (In case of significant currency fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7503 TECHNICAL DATA: - Max. planing width: 610 mm - Max. two-sided planing height: 200 mm - Max. four-sided planing height: 100 mm Top section: - 2 rubber feed rollers - 2 toothed feed rollers - Metal feed roller - Toothed infeed roller - Pawls - Pressure beam - 2 toothed feed rollers - Pressure beam - 610 mm, 4-knife planing shaft, 7.5 kW - Pressure beam - Smooth metal feed roller - Pressure beam - Profiling shaft, 7.5 kW - Pressure beam - Rubber feed roller Bottom section: - Planing shaft, 35 mm diameter, 130 mm shaft length, 2.2 kW - 2 guide rails - Infeed table - Smooth feed roller - 610 mm, 4-knife planing shaft (equipped with 2 knives), 7.5 kW - 2 smooth feed rollers - Divided metal slip roller - Side pressure roller Rear section: - Side spindles + 2 pressure units - 1) Right vertical 95 mm, 4 kW - 2) Left vertical 95 mm, 4 kW - Spindle diameter: 35 mm - Spindles adjustable up/down, right/left - Adjustable rollers in the lower table - Electric thickness adjustment - 6 feed speeds: 7 / 9 / 11.5 / 14 / 18 / 23 m/min - Feed motor: 3.1 kW - Extraction connector diameters: 3×120 mm, 3x160 mm - Dimensions (L x W x H): 3150 x 1900 x 1600 mm - Weight: approx. 3,500 kg ADVANTAGES: – The best wide planer for wet and dry wood – Perfect for processing beams, flooring, etc. – Additional profiling shaft and planer shaft (scorer) – 4 horizontal planing shafts + 2 vertical spindles – Manufactured by German brand KUPFERMUHLE – Used planer, very good condition Ljdpfx Ahszr Ixcjtohk Net price: 66,900 PLN Net price: 15,930 EUR (exchange rate: 4.2 EUR) (Prices may change with exchange rate fluctuations)

Condition: used, machine/vehicle number: 008291, Position 1: Bottom Sanders VIET-S3 - VALERIA Lhjdpfsx A Tayjx Ahtok Position 2: Top Sanders VIET-S3 - VALERIA

Condition: used, machine/vehicle number: 008401, Position 1: Bottom Sanders DMC-UNISAND K-I Position 2: Top Sanders DMC-UNISAND K-I Ledpfeywafnox Ahtehk

Condition: used, Technical specifications: Lhedpfx Aezvmttehtsk Max. planing width: 230 mm Max. planing height: 130 mm Spindle diameter: 40 mm Number of spindles: 6 Spindle arrangement: bottom 5.5 kW right/left 5.5 kW top 5.5 kW bottom 5.5 kW universal 5.5 kW Number of upper steel feed rollers: 3 Number of upper rubber feed rollers: 2 Infinitely variable feed speed adjustment Feed via cardan shafts Lubrication pump for the work table Smooth rollers in the table surface Pressure: 6 atm. Electric lifting of the machine body Power supply: 400 V Overall dimensions: Length: 3800 mm Width: 1600 mm Height: 1500 mm

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Edge Control control system with 18.5" touchscreen color monitor 16:9 Swiveling operator panel, Program storage, Motorized pressure bar adjustment, Feed via transport chain, Feed speed: 8-18 m/min Extendable workpiece support, Infeed fence with motorized adjustment Jointing unit 1961, Diamond jointing cutter for climb and counter rotation, Automatic adjustment to workpiece height Edge feed 1903 Pre-trimming up to 3 x 45 mm (depending on material) Glue application system 1905 Multi-System Automatic glue height adjustment with sensor nozzle, Pressure regulator for adjusting the cartridge contact pressure, Use of PUR adhesives possible, Pressure unit 1913 MOT, First roller driven End trimming unit 1918 with pneumatic adjustment End trim saw pneumatically swiveling, Multifunction unit 1824 MOT 4 with multifunction cutter radii 1,2,3 mm Corner copying unit 1832 Corner copying up to 3 mm edge thickness Radius scraper 1929 MOT 2 With motorized adjustment of horizontal tracing rollers With pneumatic adjustment (top and bottom separate) Chip collection box for radius scraper, Surfacing scraper 1964 For removing glue residue for a clean glue line With extraction hoods Spray unit 1856 for infeed and outfeed area Buffing unit 1940 For finishing and edge polishing ----- Technical Data ----- Edge thickness roll material: 3 mm, Edge thickness strip material: 8 mm, Max edge thickness for corner copying: 3 mm, Workpiece thickness: 45 mm, Workpiece thickness for corner copying: 45 mm, Min. workpiece length: 180 mm, Feed speed: 8-18 m/min, Distance workpiece support: 470 mm, Support table diameter for edge material: 800 mm, Ljdpfx Ahjv Sv Enstohk End cut knife for coiled material up to: 3 mm, Heating time: 3.5 min, Jointing unit power: 2 x 2 kW, End trim saw power: 2 x 0.22 kW, Milling station power: 2 x 0.35 kW, Corner copying power: 0.22 kW, Extraction port jointing unit: 120 mm, Extraction port milling unit: 70 mm, Extraction port scraper unit: 70 mm, Total length: 5,350 mm, Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm Picture of operating hours taken from a recording in 2022 Availability: short term Location: Röllbach

Condition: new, functionality: fully functional, Equipment: documentation/manual, | price list | prices | prices | prices | prices | prices | prices | prices | > > > > > ecomas.pl/price-list < < < < < You can view the prices at the very bottom of the listing: Documents / 20215835-01.pdf We offer a high-quality, low-speed pellet granulator. The pellet mill is 100% manufactured in our plant at ECOMAS Polska Czernikowo. We guarantee equipment designed to operate continuously in a 24/7 system. Our machines produce pellets that meet EU standards – properly compacted, free of harmful additives, with a calorific value of at least 4.6 kWh/kg. Ljdpfx Ahexk Ta Nstohk The main advantage lies in modern, hardened dies and rollers (60HRC+), manufactured with CNC technology. Our dies ensure high efficiency, low power consumption, and long service life of both dies and rollers. Another benefit is the lubrication of the main shaft with oil and oversized bearings, which significantly slows down wear! Are you struggling with your current granulator – bearing failures, low efficiency, clogged die, high power consumption, rapid wear of parts, etc.? With our machines, these problems disappear. We approach each customer individually! See how our machines produce, type in YouTube: ecomas_polskie_peleciarki Available power options: 7.5kW, 11kW, 15kW, 18.5kW, 22kW, 30kW, 37kW, 45kW up to 55kW. Composition: - complete head with 2/3/4/5 rollers on cylindrical bearings - welded body – fully filled with Orlen Oil Transol VG 320 - cylindrical-bevel gearbox (efficiency 98%) - base frame - bolted dies fi 230, fi 260, fi 285, fi 310, fi 400, fi 520; hole diameters 3, 4, 5, 6, 8, 10mm (100% stability, easy disassembly, and temperature control) - standard oil tank or optional tank with pump and oil installation (oil lubrication, easy oil replacement) - user manual - 12-month warranty The buyer receives a detailed operating manual and a one-year warranty. We provide full warranty and post-warranty service.

Condition: used, Year of construction: 1974, Roller diameter: 600 mm, with drive mechanism, belt guide at the top and bottom, tilting table, new motor with parallel stop. Motor power: 2.2 kW. Lhjdpjy R Tqkefx Ahtjk Location: Nattheim.

Condition: ready for operation (used), Year of construction: 1998, overall weight: 8,600 kg, This 6-axis TRUMPF TrumaBend V85S press brake was manufactured in 1998. It features a bending length of 2,550 mm, an 850 kN bending force, and a 6-axis back gauge. The Delem 65 CNC control enhances precision, while the electro-hydraulic twin cylinder drive ensures robust performance. If you are looking to get high-quality bending capabilities, consider the TRUMPF TrumaBend V85S machine we have for sale. Contact us for more information about this machine. Additional equipment • Extended Installation Height and Stroke: Additional 150 mm each • 2nd Foot Switch Machine Benefits Technical Machine Benefits • Drive type: electro-hydraulic twin cylinder with independent y1/y2 movement • Power requirements: 11 kw / 415 v / 50 hz • Design: down-stroking with dual cylinder electro-hydraulic ram drive via proportional valves • Inclination of beam (y1/y2): +10 mm • Bending force: 850 kn // gap between columns: 2260 mm // throat depth: 410 mm // stroke length: 215 mm // open height: 385 mm • Bed width: 120 mm • Ram measurement: incremental with deflection compensation • Tool holders: self-centering top tool holder, hardened bottom tool holder • Hydraulic tool clamping: hydraulic clamping for both top and bottom tools • Safety features: safety screens, light barriers, single/double break modes // front support brackets: two quick-adjustable brackets Extra Information Back Gauge: CNC-controlled ‘X’ and ‘R’ axis back gauge with safe 2-finger adjustment X-axis Back Gauge Travel: 600 mm Maximum X Distance: 860 mm R-axis Vertical Travel: 250 mm Back Gauge Travel Speed: 500 mm/sec R-axis Speed: 300 mm/sec Ljdpszuxkhjfx Ahtehk Z1/Z2 Axis: CNC-controlled, asymmetric finger adjustment Working Speeds: Approach Speed: 200 mm/sec Operation Speed: 1–10 mm/sec Return Speed: 135 mm/sec Technical Specification Bending Length 2550 mm

Condition: used, functionality: fully functional, mileage: 2,52,801 km, power: 331 kW (450.03 HP), first registration: 05/2024, fuel type: diesel, overall weight: 8,269 kg, axle configuration: 4x2, wheelbase: 385 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,800 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Predictive Powertrain Control (PPC). Cruise control. L-cab BigSpace, 2.50m, level floor. AGM-Batteries, 2 x 12 V/220 Ah, maintenance-free. Engine OM471, inline 6, 12.8 l, 330kW (449hp),2200 Nm. EURO 6. Automatic gearbox. Mercedes PowerShift 3. Transmission G211-12/14.93-1.0. High Performance Engine Brake. Advanced Emergency Brake System AEBS Driver attention support Driver comfort Automatic climate control. Driver's suspension seat, comfort. Armrests on both sides, co-driver's seat. Luxury top bunk, narrow. Luxury bottom bunk. Auxiliary hot water heater, cab. Pull-out refrigerator, under lower bunk. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Stability Control Assist (ESP). Lane Keeping Assist. Active Brake Assist 5. Front axle tyres 315/70 R22.5. Rear axle tyres 315/70 R22.5. Drive axle ratio 2.41 Ljdpfszpyd Sox Ahtjhk Fifth-wheel coupling ex factory, standard, Jost JSK 37C. Height = 150 mm. Wheelbase 3850 mm, wheel arrangement 4x2. Tank 790l+120l AdBlue,left,735x700x2170,alu.,step. Lockable. Second tank, 430 l, right,735 x 700 x 1000 mm,alu. Lockable. Speed limiter, 80 km/h. Technology Truck Data Center 7. Interface for fleet management system FMS. Exterior LED main headlamps. Foglamps, halogen. LED daytime running lamps. MirrorCam Tyres Information Front left - 14 mm Front right - 14 mm Rear left inner - 12 mm Rear left outer - 12 mm Rear right inner - 12 mm Rear right outer - 12 mm

Condition: used, Year of construction: 2004, operating hours: 3,142 h, total width: 2,400 mm, total height: 2,100 mm, Colour: Grey Empty weight: 5.000 kg Dimensions (LxBxH): 550 x 240 x 210 cm Price: On request - Year: 2004 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 102848 - Operating hours: 3142 - Number of spindles [pcs.]: 7 - └ Spindle 1: - - Spindle type: Bottom - - Motor power [kW]: 15 - - Tool present: Yes - └ Spindle 2: - - Spindle type: Right - - Motor power [kW]: 11 - - Tool present: Yes - └ Spindle 3: - - Spindle type: Left - - Motor power [kW]: 11 - - Tool present: Yes - └ Spindle 4: - - Spindle type: Top - - Motor power [kW]: 22 - - Tool present: Yes - └ Spindle 5: - - Spindle type: Bottom - - Motor power [kW]: 15 - - Tool present: Yes - └ Spindle 6: - - Spindle type: Top - - Motor power [kW]: 30 - - Tool present: Yes - └ Spindle 7: - - Spindle type: Bottom - - Motor power [kW]: 15 - Min. planing width [mm]: 20 - Max. planing width [mm]: 300 - Min. planing height [mm]: 3 - Max. planing height [mm]: 160 - Feed table length [mm]: 1000 - Feed roller diameter [mm]: 140 - Conveyor drive: Cardan drive Ledpfx Ahezvcqzetehk - Lubrication system: Automatic - Diameter extraction nozzle [mm]: 160 - Options: Powered rollers in table, Powerlock - Feed speed: Manual - └ Min. feed speed [m/min]: 5 - └ Max. feed speed [m/min]: 33 - └ Feed speed control: Continuously adjustable - Voltage [V]: 400 - Current consumption [A]: 278 - Fuse [A]: 400 - Power [kW]: 128.0 - Transport dimensions: 5500mm x 2400mm x 2100mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, functionality: fully functional, mileage: 4,01,962 km, power: 331 kW (450.03 HP), first registration: 10/2023, fuel type: diesel, overall weight: 8,269 kg, axle configuration: 4x2, wheelbase: 385 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,800 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Predictive Powertrain Control (PPC). Cruise control. L-cab BigSpace, 2.50m, level floor. AGM-Batteries, 2 x 12 V/220 Ah, maintenance-free. Engine OM471, inline 6, 12.8 l, 330kW (449hp),2200 Nm. EURO 6. Automatic gearbox. Mercedes PowerShift 3. Transmission G211-12/14.93-1.0. High Performance Engine Brake. Advanced Emergency Brake System AEBS Driver attention support Driver comfort Automatic climate control. Driver's suspension seat, comfort. Armrests on both sides, co-driver's seat. Luxury top bunk, narrow. Luxury bottom bunk. Auxiliary hot water heater, cab. Pull-out refrigerator, under lower bunk. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Lhodjzpv Dzspfx Ahtjk Stability Control Assist (ESP). Lane Keeping Assist. Active Brake Assist 5. Front axle tyres 315/70 R22.5. Rear axle tyres 315/70 R22.5. Drive axle ratio 2.41 Fifth-wheel coupling ex factory, standard, Jost JSK 37C. Height = 150 mm. Wheelbase 3850 mm, wheel arrangement 4x2. Tank 790l+120l AdBlue,left,735x700x2170,alu.,step. Lockable. Second tank, 430 l, right,735 x 700 x 1000 mm,alu. Lockable. Speed limiter, 80 km/h. Technology Truck Data Center 7. Interface for fleet management system FMS. Exterior LED main headlamps. Foglamps, halogen. LED daytime running lamps. MirrorCam Tyres Information Front left - 5 mm Front right - 5 mm Rear left inner - 5 mm Rear left outer - 5 mm Rear right inner - 5 mm Rear right outer - 5 mm

Condition: used, Technical Data Machining Area - X = 3200 mm - Y = 1250 mm Workpiece Dimensions - Length X: 200 - 3200 mm - Height Y: 35 - 1250 mm - Thickness Z: 8 - 60 mm - Maximum workpiece weight: 50 kg Workpiece Reference System The preliminary positioning of the workpiece in the longitudinal direction (X-axis) is performed in the loading area on the left side of the machine by means of a stop, which is placed in a fixed position in the work table. Workpiece Positioning Unit The workpiece positioning system in the X-axis is achieved by two clamping jaws that hold the workpiece during the machining process. The movement is controlled by two independently driven servomotors. Workpiece Support Surface The workpiece support surface, on which the machining units are located, consists of a series of rubber-coated rollers that form the workpiece reference in the Z-axis. On the opposite side of the machining unit, a counter-pressure system is installed, which optimally holds the workpiece in the machine. Converter and voltage connection for voltages of 380 - 415 V (+-10%), 50/60 Hz Air conditioning unit for the electrical control cabinet bSolid control system HP kit for the rapid movement of the workpiece clamping jaws The combined system, with servomotor and precision planetary gearbox, enables movement speeds of up to 110 m/min with fast acceleration ramps. Consent pedal for opening/closing the clamping jaw BH28 drilling head with individually addressable spindles - 17 vertical spindles (7 in the X-axis, 10 in the Y-axis) - 5 horizontal spindles (3 in the X-axis, 2 in the Y-axis) - 1 dado blade unit with a fixed working direction in X 11 kW electric spindle with HSK-F adapter with "C" axis torque - 11 kW, 24000 rpm in S1 operation - 6000 - 24000 rpm programmable via NC Angle saw unit HSK F63 for saw blade - Max. speed 8,400 rpm Drilling and milling unit for top and bottom edges / end drilling and milling unit - Max. speed 9,000 rpm Ljdpfx Aozutrajhtehk - Tool holder with ER20 collet 8-position tool changer magazine - disc changer Accessory kit "Sensitive Surfaces" for workpiece transport Laser device for manual reading of QR codes SOPHIA - IoT Connection Dowel Ø8x40 mm and glue insertion unit Barcode2Hops with variables MultiPost upgrade POST_Element Splitter NC-Hops 7.0

Condition: excellent (used), Number of spindles 5 St. Working width 230 mm Working height 120 mm Lhedpfxszughzo Ahtek Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. control Memory-Funktion Weinig Powermat 500 with grooved table ----- The machine arrives at the warehouse and is cleaned and fully inspected. Brief Summary: ----- - 5 Spindles - 8,000 rpm - Grooved table for short or difficult-to-guide workpieces, coated with Marathon PowerCoating - One driven roller in the outfeed table, hardened: 210 mm wide - Left and top spindles controlled for width and height - Quick-release spindle nut Detailed Description: ----- Technical Data: Working width: 20-230 mm Working height: 8-120 mm Number of spindles: 5 1st Spindle - bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 8,000 rpm Tool circle: 125-180 mm Tool circle for rebate cutter: 130-160 mm Travel Axial: 17 mm Folding attachment MarathonCoatin for table insert in front of 1st lower tool holder 2nd Spindle - right ----- Motor with brake: 5.5 kW Spindle diameter: 40 mm Speed: 8,000 rpm Tool swing diameter: 93 - 200 mm Max. groove depth: 35 mm Axially travel: 80 mm Radial travel: Min. tool diameter at stop level: 93 mm Max. tool diameter behind stop level: 200 mm 3rd Spindle - left ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 8,000 rpm Tool swing diameter: 93 - 200 mm Tool swing diameter for straight cutter heads: max. 163 mm Max. Groove depth: 35 mm Axially travel: 55 mm Pressure shoe in front of left spindle, including 2 lateral pressure rollers, spring-loaded Spindle radially CNC-controlled 4th Spindle - top ----- Motor with brake: 11.0 kW Spindle diameter: 40 mm Speed: 8,000 rpm Tool swing diameter: 93 - 200 mm Maximum tool swing diameter for straight cutter heads: 180 mm Maximum groove depth: 35 mm Axially travel: 40 mm Spindle radially CNC-controlled Split pressure shoe in front of upper tool holder, adjustable to the tool swing diameter and pivoting away from the tool, spring-loaded. 5. Spindle - Lower ----- Motor with brake: 5.5 kW Spindle diameter: 40 mm Speed: 8,000 rpm Tool swing diameter: 93 - 225 mm Max. throat depth: 15 mm Axially travel: 35 mm Radial travel: Min. tool diameter to table level: 93 mm Max. tool diameter 6 mm below table level: 225 mm Feed system ----- Frequency-controlled feed, infinitely variable with brake: 4 kW, 5 - 30 m/min Infeed roller in front of the first lower tool, pneumatically controlled up/down. Durofer pointed tooth rollers with depth limiter and self-cleaning. Feed roller adjustment travel relative to the left tool holder, axial 35 mm Reduced roller spacing relative to the right tool Machine electrical system ----- Operating voltage 400 V (voltage range 380 - 420 V), 50 Hz. Machine stand, tables, and stops ----- Infeed table: 2500 mm long (including jointing guide) Slotted guide for short or difficult-to-guide workpieces, coated...

Condition: excellent (used), CATALOG NUMBER 7069 TECHNICAL DATA - Inlet width: 400mm - Inlet height: 150mm - Shaft width: 450mm - Shaft diameter: 550mm - Number of knives: 2 pcs - 3 toothed feed rollers from the top and bottom, 2×2.2kW Lhjdozruu Djpfx Ahtek - Electric auto-reverse - Reverse mode - Belt conveyor - Conveyor length: 5100mm - Feed belt width: 400mm - Main motor: 30kW - Chipper dimensions (L/W/H): 2600x1500x1530mm - Overall conveyor dimensions (L/W/H): 5200x560x910mm - Weight approx.: 3000kg – with belt conveyor – electric auto-reverse (adjustable) – reverse mode – used chipper, in very good condition Net price: 68,900 PLN Net price: 16,400 EUR (based on exchange rate 4.2 EUR) (Prices may vary with significant exchange rate fluctuations)

Condition: new, Catalog number: HZ014 – preliminary milling – edge trimming – new machine, in stock – CE certificate – professional TECHNICAL DATA panel thickness 8-45mm edge thickness 0.4 mm – 3 mm min panel width 90mm min panel length 170mm feed speed 9m/min pre-milling 12000 rpm front/rear milling 12000 rpm top/bottom milling 12000 rpm edge trimming 12000 rpm polishing 3000 rpm feed motor power 1.13kW glue tank heating power 1.315kW Lhedpezrurijfx Ahtsk pre-milling power 1.5kW pre-heating power 0.4kW glue spindle power 0.25kW front/rear milling power 0.22kW top/bottom milling power 2×0.37kW edge trimming power 0.37kW polishing motor 0.12 kW and 0.18 kW motor 6.16kW working height of the table 960mm extended support width 560mm extraction connection 3x125mm dimensions L/W/H 3731x720x1636mm weight 915kg The Holzing G-MAX 480 edge banding machine with pre-milling, saw cutting, top-bottom milling, edge trimming, radius scraping, and polishing ensures a high-quality final result on the workpiece. The veneer can be in rolls up to 3 mm thick and in strips up to 4 mm thick. The machine also has a glue tank with a capacity of 1.2 kg. Net price: 99000 PLN Net price: 23571 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary due to higher fluctuations)

Condition: excellent (used), CATALOG NUMBER 7611 Technical specifications: - Inlet dimensions: 460x180mm - Outlet diameter: 300mm - Shaft width: 550mm - Shaft diameter: 350mm - Number of knives: 10 pcs - Knives arranged in 2 rows Ljdpfszruibex Ahtohk - Autoreverse function - Knife setting device - Sieve diameter: 30mm - Feeding conveyor from top and bottom - Bottom pull shaft - Feeding conveyor length: 4400mm - Main motor: 37kW - Upper feed motor: 1.5kW - Lower feed motor: 2.2kW - Dimensions (L/W/H): 6100x1150x1000mm - Weight approx: 3500kg ADVANTAGES – German-made – Autoreverse function – Feeding conveyor from top and bottom – Knife setting device – Very good condition – Used shredder Net price: 98,900 PLN Net price: 23,550 EUR Net price calculated at 4.2 PLN/EUR (Price may change with significant currency fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 8013 TECHNICAL DATA - inlet width 450mm - inlet height 210mm - shaft width 450mm - shaft diameter 550mm - number of knives 2 pcs - traction shaft, toothed, top and bottom 2 × 2.2kW - additionally, a toothed traction roller at the bottom, in front of the traction shaft - electric auto-reverse (with adjustable settings) - reverse gear - belt conveyor - conveyor length 2260mm - conveyor belt width 430mm - main motor 45kW - overall dimensions of the conveyor (length/width/height) 4900x1700x1700mm - weight approximately 3000kg ADVANTAGES – with belt conveyor – electric auto-reverse – reverse gear – used shredder, very good condition Net price: 76900 PLN Net price: 18310 EUR, depending on an exchange rate of 4.20 EUR Lhsdpfezrugasx Ahtsk (Prices are subject to change due to significant fluctuations)

Condition: excellent (used), Year of construction: 1974, Catalogue number 7685 TECHNICAL DATA - feed opening width: 440mm - feed opening height: 300mm - shaft width: 480mm - shaft diameter: 440mm - number of knives: 2 pcs - screen size: 50x50mm - toothed feed roller from top and bottom - shaft motor: 0.78/1.1kW - electric auto-reverse (adjustable) - with conveyor belt - feed belt length: 4006mm - feed belt width: 380mm - belt feed forward/reverse - main motor: 30kW - dimensions (L/W/H): 6100x1100x1100mm - weight approx. 2000kg ADVANTAGES – German-made – with conveyor feeder Lsdpfx Ahszruc Ustshk – auto-reverse – used chipper, in very good condition Net price: 76,900 PLN Net price: 18,300 EUR depending on the exchange rate of 4.2 EUR (Prices may change with significant fluctuations)

Condition: used, Year of construction: 2002, Cylindroconical stainless steel tank with glycol cooling for frame and cone, ventilation nozzle at the outlet and various fittings. Wall thicknesses: - Cone 3 mm - Frame 2 mm - Clamp bottom 3 mm Cone angle: 120° Roughness of cone interior < 0.35 µm Additional title: Vertical, cylindrical-conical, coolable stainless steel tank Lsdpfx Aeztza Ajhtohk Volume: 4681 liter Working pressure tank: 0,99 bar Working presure double jacket: 0,9 bar Width: 2.3 m Height: 2.5 m Material: V2A stainless steel 1.4301 (AISI 304) Base construction: cylindroconical, opper bottom dished shell, on 3 cabinet legs one is 50mm shorter for a load cell Features: 3 cooling zones with volumes of 7 and 14 and 34 liters, coolant = glycol solution, connection size inlet (one each) DN 20, connection size outlet (one each) DN 25, sight glas DN100 mit halogen lamp,CIP head, air duct with sterile filter, standpipe, outlet pipe DN 65 with disc valve, manhole with lid, sampling tap, temperature sensor, load cell, Safety fitting consisting of over pressure pipe with valve, manometer and flap valve DN32

Condition: used, Year of construction: 2018, Vertical pressure tank with jacket cooling and various fittings. Additional title: Vertical, coolable stainless steel tank Max. content: 6681 l Lhedpjzty Sqjfx Ahtek Max. pressure: 3 bar Width: approx. 1.9 m Height: approx. 3.3 m Operation / Control: manual Material: stainless steel Position: free standing Base construction: vertical cylindrical tank with dished bottoms, pipe feet with domes Features: pivoting manhole in the lid, ladder holder, 2 shell cooling zones with temperature control, side inlet, central bottom outlet with shut-off valve

Condition: used, Year of construction: 2000, Insulated, steam-heated V4A stainless steel tanks, most recently used as CIP cleaning tanks. Additional title: vertical, conical stainless steel tanks Capacity: 3000 l/tank Width: 1,55 m Height: 3 m Weight: 600 kg Ledpfxezty H Io Ahtjhk Material: V4A stainless steel Position: vertical, standing on feet Base construction: cylindrical tanks with dished top and conical bottom Features: 2 stainless steel tanks 30 hl each, insulated, heatable by steam

Year of construction: 2019, condition: good (used), functionality: fully functional, Yoco 1650E, ref. 3026 Lodjzvfgrepfx Ahtjhk Year: 2019 Maximum sheet size: 1200x1680 mm Bottom feeder – cup feeder Mechanical side lay Motorized pressure adjustment Stripping unit Batch delivery Caliper: E, B, C, EB, laminated board Available immediately

Condition: used, Year of construction: 1991, 2 vertical stainless steel tanks with dished bottoms, shell cooling zone, manhole, sampling tap, insulation and central outlet. Additional title: 2 insulated, coolable tanks Volume: 44361 l Operating pressure: 0,9 bar Operating temperature: 20 °C Ljdpfx Ahjztya Ujtehk Material: stainless steel Position: vertical Base construction: cylindrical tank with dished bottoms, placed an 4 square tube feet Features: insulated, covered, 1 cooling zone (183 l, 0.9 bar), manhole, safety valve, CIP pipe with spray head, manometer, yeast plug Periphery: own temperature control