Used Bread Rounder/Long Moulder for sale (7,729)

Condition: new, Year of construction: 2025, machine/vehicle number: 6939, functionality: fully functional, Fimal Swivel Spindle Milling Machine TX 160 "Partnership Edition" Milling stop including parallel adjustment with handwheel and digital display, handwheel adjustment with digital display for the front stop jaw, electric travel swivel device for the complete stop, quick-release lever for fixing, aluminum stop jaws and pressure device, arc milling stop, electromotive spindle height adjustment, including digital display and decimal impulse setting, Table insert adjustable to the milling tool diameter (instead of table insert rings), Indicator lights for set milling speed, Electrical system and safety devices according to CE standard, Table dimensions: 2,500 x 780 mm, Milling spindle d= 30 mm, H= 140 mm, Milling speeds: 3000/4500/6000/8000/10000 rpm, Max. tool size under the table: d= 320 mm, H= 50 mm, Motor 7.5 kW / 10 HP, 400 Volt, 50 Hz, including automatic star-delta switch, Sound pressure level according to EN 27960: 83.9 – 87.3 dB(A), Spindle inclination: -45° to +45°, Electromotive spindle swivel adjustment including electronic display and decimal impulse setting, Partnership Edition complete with: Hsdpfevlw Idjx Ab Iont "L" version with double-sided table extension and extendable workpiece support with emergency stop button, Upper control panel including electronic display, Swiveling mounting plate for feed device, mounted on the vertical column of the upper control panel, Socket for feed device, Right-left operation according to CE standard, Preparation for the installation of AIGNER integral stop jaws Ex works, from Seevetal location, without pre-carriage, freight and instruction, as inspected, subject to prior sale

Condition: not inspected (used), functionality: unexamined, workpiece height (max.): 160 mm, workpiece width (max.): 230 mm, Working width: 20 – 230 mm Working height: 8 – 160 mm 7-spindle configuration Feed rate infinitely adjustable: 6 – 36 m/min Spindle motors with 7.5 kW, 11 kW and 18.5 kW power Mechanical brakes on the motors Electrical adjustment options for spindles and feed rate Hardened table insert in front of the first lower spindle Pressure pads and guides for precise workpiece guidance High-quality ball bearings and robust industrial design Spindle arrangement: Hjdpozt Hf Djfx Ab Ient Lower horizontal spindle 7.5 kW Right vertical spindle 7.5 kW Left vertical spindle 11 kW Right vertical spindle 7.5 kW Upper horizontal spindle 18.5 kW Lower horizontal spindle 7.5 kW Universal spindle 7.5 kW

Condition: repair required (used), Year of construction: 2010, functionality: not functional, feed rate X-axis: 120 m/min, input frequency: 50 Hz, For sale is a Weinig mechanization system consisting of: Weinig 811, Weinig 820, Weinig 814, Weinig 811, Hnodpfx Asv Skayeb Iot Weinig 806

Condition: excellent (used), Catalogue number 7784 TECHNICAL DATA - Spindle diameter: 30 mm - Working height of spindle: 150 mm - Interchangeable spindle - Spindle locking - Adjustable up/down + angle - Original cast iron fence with full adjustment - 4 spindle speeds + left/right: 3000/5000/6000/10000 rpm - Table dimensions: 1120x800 mm - Motor: 3.7 kW - Dimensions (L/W/H): 1100x1400x1160 mm - Weight: 775 kg ADVANTAGES – German-made – Used milling machine – Very good condition Net price: 6,900 PLN Hsdpfx Aozwwd Ejb Ient Net price: 1,640 EUR Net price calculated at a rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: ready for operation (used), Year of construction: 1996, Tilting Spindle Moulder Table Moulder Woodworking Moulder Joiner’s Moulder CASOLIN Model: F45 Year of manufacture: 1996 5 adjustable spindle speeds: 3000/4500/6000/8000/10,000 rpm Table dimensions approx. 130 x 90 cm Milling fence with fine adjustment Electric height adjustment with digital display Electric tilting from -5° to +45° with digital angle display Spindle diameter: 30 mm Matching power feeders can be found in my other listings. Condition as shown in the pictures, please also refer to the item description. Parts may also be collected by the buyer. All dimensions are approximate. All information is provided to the best of our knowledge, but without guarantee. Subject to prior sale. Hnjdpfx Abjx Dmnas Ijt Items can be collected in person or shipped at the buyer’s expense. Shipping costs are indicative and may vary depending on distance and unloading options. The listed sale price is a net amount plus VAT. An invoice with VAT shown will be provided. Warranty terms: Due to wear and tear on used parts, items are generally sold as defective – for parts donors only – and only to businesses. By placing a bid, the buyer accepts this as the basis for the purchase agreement.

Condition: excellent (used), CATALOG NUMBER: 6857 TECHNICAL DATA - Spindle diameter: 30mm - Spindle height: 140mm - Interchangeable spindle - Height adjustable (up/down) - Guide fence - 4 spindle speeds + right/left rotation: 3000, 4500, 6000, 9000 RPM - Table size with extension: 1970x990mm - Motor: 5.2kW - Extraction port diameter: 1x80mm, 1x120mm - Dimensions (L/W/H): 1920x1050x1130mm - Weight: 550kg Hjdpfxjzr I Hgj Ab Ijnt ADVANTAGES – German manufacture – Used milling machine – Very good condition Net price: 11,900 PLN Net price: 2,830 EUR Net price calculated at exchange rate 4.2 PLN/EUR (in case of major exchange rate fluctuations the price may change)

Condition: used, Year of construction: 2010, Dough Divider and Molder Fortuna Primus K6 Year of manufacture: 2010 Condition: cleaned & inspected Operating hours: approx. 24,500 Output per row: max. 1,200 pieces Maximum total output: 7,200 pieces/hour Weight range: 35-80g Piece weight, molding speed, and molding chamber height can be adjusted manually Pressure roller on spreader belts Flour dispenser at the dough discharge Hsdpsz A Srlofx Ab Isnt Includes piston set for 4 and 6-row production The Fortuna Primus is a proven dough divider and molder for the best artisanal quality. It is the dough expert for difficult and long-proofed doughs – from soft Berliner dough to firm pretzel dough. Even cool or doughs that tend to stick are processed gently and precisely by the Fortuna Primus. Convenient dough input via a hopper with a capacity of 20-25 kg Small amounts of dough are automatically fed to the dividing system via star wheels Thanks to the dough-friendly dividing system, the fermentation cells remain optimally preserved Best conditions for artisanal baked goods of top quality Dough pieces detach easily from the drum, even with extremely soft doughs, without prior addition of flour Easy access to all machine parts for simple cleaning and maintenance

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK FM230-L1 Dust Collector is a professional dust extraction system designed for woodworking shops and workshops that require efficient dust collection while operating in limited spaces. Powered by a 0.75 kW motor and equipped with a high-performance impeller, it delivers an airflow capacity of 1,150 m³/h for effective removal of sawdust, wood chips, and fine dust from woodworking machines and workstations. It is a reliable solution for both professional production facilities and home workshops. Key Features Airflow capacity of 1,150 m³/h – efficiently removes sawdust, wood chips, and fine dust from machines and work areas. 0.75 kW (S1) continuous-duty motor – designed for reliable long-term operation on a standard 230 V power supply without requiring electrical upgrades. WhirlWind metal impeller – dynamically balanced for smooth, quiet operation and long service life. Mobile base – four heavy-duty bearing-mounted wheels and an ergonomic handle make transportation around the workshop easy. Sealed steel housing – minimizes dust leakage while reducing vibration for improved operating comfort. Universal Ø100 mm extraction port – compatible with most woodworking machines and dust extraction hose systems. Vacuum hose with cleaning nozzle – allows the unit to be used for cleaning floors and workstations as well as machine extraction. Construction and Technology The CORMAK FM230-L1 woodworking dust collector features a durable steel housing and a high-efficiency multi-blade metal impeller that generates strong suction while maintaining a low noise level. Integrated seals reduce dust emissions, helping keep the workshop cleaner and improving operator comfort. The machine is mounted on a robust mobile frame with four wheels and an ergonomic transport handle, allowing it to be moved quickly between workstations without interrupting production. Performance and Efficiency The FM230-L1 delivers reliable continuous performance thanks to its S1-rated motor. Operating at 2,800 rpm, it provides powerful airflow for efficient extraction from machines such as: Thickness planers Circular saws Spindle moulders Belt sanders The combined 60 L collection capacity allows extended operation before emptying the bags, helping to reduce downtime. Applications The FM230-L1 is ideal for: Woodworking and furniture manufacturing workshops Technical schools and vocational training centres Home workshops and hobby woodworking Service workshops requiring localized dust extraction for light to medium dust loads Standard Equipment Fabric filter bag Waste collection bag Mobile wheeled base High-performance metal impeller Flexible vacuum hose with cleaning nozzle Bag mounting clamps Optional Equipment High-efficiency filter bags Extraction reducers and Y-connectors Antistatic Ø100 mm extraction hoses Multi-machine distribution manifolds Technical Specifications Specification Value Motor power (S1) 0.75 kW Motor speed 2,800 rpm Airflow capacity 1,150 m³/h Maximum vacuum pressure 1,020 Pa Noise level 65 dB Collection bag capacity 60 L Number of bags 2 Extraction inlet diameter Ø100 mm Height 1,550 mm Width 420 mm Length 800 mm Power supply 230 V Weight 27 kg Hjdevu A Easpfx Ab Iont

Condition: excellent (used), Year of construction: 2018, operating hours: 5,000 h, functionality: fully functional, overall weight: 550 kg, input voltage: 400 V, type of input current: three-phase, year of last overhaul: 2026, The machine was used as a backup and has therefore not been used much recently. Hnedezzahbepfx Ab Ijt Weights: 60-160g, SK73. Maximum output: approx. 4,500 units/hour.

Condition: excellent (used), Year of construction: 2023, Swivel spindle milling machine Manufacturer: Hofmann Type: TFS 107 Year of manufacture: 2023 Swivel range: -45.5° to +45.5° Hnjdpfx Abjztznto Ist Table: 2,000 x 813 mm Table height: 890 mm Power: 7.5 kW Speed: 1,500 - 10,000 rpm, stepless speed adjustment Spindle diameter: 30 mm / 40 mm Vertical adjustment: 145 mm Tool holder: MK5 Feed: Yes Motor brake: Yes Dust extraction port diameter: 120 mm Weight: approx. 820 kg Included: - Augner stop jaws - 40 mm spindle

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, Spindle Power: Bottom spindle: 4 kW Right spindle: 7.5 kW Left spindle: 7.5 kW Top spindle: 7.5 kW Bottom spindle: 4 kW Universal spindle: 4 kW Planing width: 220 mm Planing height: 120 mm Hnsdpfoyybdwex Ab Iet Max. spindle speed: 6,000 rpm Spindle diameter: 40 mm Feed rate max.: 22 m/min (infinitely variable) Feed motor: 3 kW Main motor: 7.5 kW Pneumatic top pressure Feed via cardan drive Motorized adjustment (planing width and height) Infeed table length: 2,000 mm Integrated lubricant pump

Condition: like new (used), Year of construction: 2025, functionality: fully functional, cutting length (max.): 6,000 mm, saw blade diameter: 550 mm, like new, previous company out of business Hnsdsy Rp Tzepfx Ab Iot

Condition: excellent (used), functionality: fully functional, mileage: 1,58,039 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 3,682 mm, overall weight: 3,500 kg, empty load weight: 2,135 kg, maximum load weight: 1,365 kg, first registration: 07/2020, next inspection (TÜV): 04/2028, loading space length: 3,128 mm, loading space width: 1,753 mm, loading space height: 1,890 mm, fuel tank capacity: 105 l, emission class: euro6, color: white, tire size: 225/65R16C M+S, number of seats: 3, number of previous owners: 1, total length: 5,548 mm, total width: 2,070 mm, total height: 2,482 mm, tire condition: 75 %, fuel: diesel, number of gears: 6, Equipment: ABS, AdBlue, USB port, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), full service history, immobilizer system, onboard computer, parking sensors, power assisted steering, power mirror, seat heater, sliding door, soot filter, traction control, truck registration, winter tires, Very clean and well-maintained, accident-free lease return vehicle with high-quality special equipment from first owner, non-smoking vehicle, Opel Movano B panel van L2H2, Euro 6 with truck registration, Sortimo cargo area package with 3-way LED lighting, 270° rear wing doors, rear PDC (parking distance control), cruise control, 3-seater with Multiflex passenger double seat, Isringhausen comfort driver's suspension seat with center armrest, pneumatic lumbar support adjustment, and integrated seat heating, etc. * ABS electronic * Storage compartment above the windshield * Dual airbag * Exterior mirrors, electrically adjustable and heated * Sheet metal insert without window, driver's side * On-board computer * Tachometer * ESP and ASR * Power windows, front * Transmission: 6-speed gearbox * Seat belts: 3-point safety belts, front * Headrests (3), height-adjustable * Paint: solid color * Cargo area: sliding door, right * LED cargo area lighting * Sortimo cargo area floor, washable * Sowaflex cargo area lining, side up to roof height, washable * Steering column, height-adjustable * Upholstery - fabric * Quickheat rapid heating system * Radio 15 USB * Tires: tire repair kit * Diesel particulate filter with SCR * Euro 6 * Wheels: steel wheels 6.5 J x 16 * Crosswind assist * Power steering * Visibility package * Seat: passenger multi-function double seat with storage compartment * Seat: Isringhausen comfort driver's suspension seat with center armrest, seat heating, and pneumatic lumbar support adjustment * Socket, 12 Volt, front * Daytime running lights in LED * Blind spot mirror in passenger sun visor * Partition, closed * Anchoring points in the cargo area * Tie-down eyes on the loading area * Immobilizer * Heat protection glazing, green tinted * Central locking with remote control * Rear wing doors, 270°, sheet metal * Speed limiter * Air conditioning with pollen filter * ParkPilot * Socket, 12 Volt, in the cargo area * Rear step, integrated into the bumper * Tie-down eyes, side, cargo area Fully documented service history through an Opel authorized dealer. Last service performed in 07/2024 at a mileage of 123,851 km. Front axle brake discs and brake pads are in new condition, rear axle brake pads are new. Oil service can be performed upon request! Vehicle is available immediately. If you have any questions, please feel free to contact us by phone. Hnodpfjz Aaxijx Ab Ijt The vehicle description serves only to describe the vehicle and does not constitute any warranty in the legal sense. Information on accessories is without guarantee; subject to changes, prior sale, and errors! We are a member of the Federal Association of Independent Car Dealers (BVfK) and carry the BVfK quality seal!

Condition: used, Year of construction: 2001, total length: 1,700 mm, total width: 1,000 mm, total height: 2,100 mm, Colour: Grey Price: On request - Details: - └ Description: Readout positioning does not work properly. Price AS-IS - Year: 2001 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AB/143039 - Spindle diameter [mm]: 40 - Table length [mm]: 1195 - Table width [mm]: 350 - Feeding device present: Yes - Guide present: Yes - Tool key included: Yes - Spindle speed: Manual - Voltage [V]: 400 - Current consumption [A]: 12 - Fuse [A]: 20 - Transport dimensions: 1700mm x 1000mm x 2100mm (l x w x h) - Transport packages [pcs.]: 1 Financial information Hjdpfx Ajymlahjb Iont VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2011, 513 USED Line for ciabatta, square and round loaves. Features: Hjdpfx Aezugm Djb Ijnt - 3-row rounding, - additional rounding drums, - grain sprinkling. TECHNICAL DATA: - Year of production: 2011 The price is a net price. Paid options available: transport. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 23,500 h, functionality: fully functional, machine/vehicle number: 8107000021B, spindle bore: 32 mm, spindle speed (max.): 8,500 rpm, overall weight: 4,300 kg, controller model: FANUC 32i MB, bar length: 3,200 mm, DMG MORI GILDEMEISTER SPRINT 32/5 – Short/Long Turning Automaton Well-maintained machine, low operating hours, including IEMCA BOSS 338/32 HD bar feeder (up to 3,200 mm bar length), year of manufacture 2016, as well as a conversion kit to a long turning automaton (Swisstype kit) for short and long turning on a single machine. Delivery terms: Free on truck Availability: Immediate - subject to agreement NOTE: The machine must be picked up on a fixed date in mid/late October 2026; we will provide the exact date in advance! Technical data: Control: FANUC 32i MB Operating hours recorded: 25,263 Spindle hours recorded: 22,772 MAIN SPINDLE DATA: Max. turning diameter: 32 mm (guide bushing bore: 38 mm) Stroke Z1: 100 mm Max. speed: 8,500 RPM Drive power S1: 5.5 kW TAILSTOCK SPINDLE DATA: Max. turning diameter: 32 mm (guide bushing bore: 38 mm) Stroke Z2: 200 mm Max. speed: 8,500 RPM Drive power S1: 2.2 kW AXIS DATA X1: Travel: 70 mm Max. speed: 40 m/min Max. acceleration: 5 m/s² AXIS DATA Y1: Travel: 405 mm Max. speed: 30 m/min Max. acceleration: 5 m/s² AXIS DATA X2: Hedpoz A Tbusfx Ab Ient Travel: 300 mm Max. speed: 40 m/min Max. acceleration: 5 m/s² TOOL HOLDER DATA – SLIDE 1: Tool holder diameter: 25 mm Number of fixed tools for external machining: 6 Tool holder size: 16 × 16 mm Number of driven tools: 4 Collet type: ESX20 TOOL HOLDER DATA – SLIDE 2: Number of fixed tools for internal machining: 4 Tool holder diameter: 25 mm Scope of delivery: IEMCA BOSS 338/32 HD bar feeder (up to 3,200 mm bar length), year of manufacture 2016 Chip conveyor Available manuals Accessories as shown in the pictures Dimensions & Weight Footprint (L x W x H): approx. 7500 x 1600 x 2500 mm Weight: approx. 4300 kg Attention: Disc damaged! If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Additional notes: ► Upon request, we can offer transport to your destination. ► The goods are sold without any warranty. ► Technical data is subject to change.

Condition: excellent (used), CATALOG NUMBER 7003 Hnedpfjzr I Epjx Ab Iet Technical Data: - Spindle diameter: 25mm - Spindle working height: 80mm - Interchangeable spindle - Spindle locking - Height adjustable (up/down) - Original cast iron fence - 2 speed options + right/left rotation - Table dimensions: 1000x800mm - Motor: 3kW - Dimensions (LxWxH): 1280x860x1100mm - Weight: 465kg Features: – Bulgarian manufacture – Very good condition – Used milling machine Net price: 5,500 PLN Net price: 1,300 EUR (based on exchange rate of 4.2 PLN/EUR) (Prices may change due to fluctuations in the exchange rate)

Condition: excellent (used), Year of construction: 2007, 520 USED MHS CM380 bread shop slicer. Hnodpfszwpfzex Ab Ist EXTERNAL DIMENSIONS (in cm): - W: 70 - L: 100 - H: 110 TECHNICAL DATA: - year of production: 2007 - power: 1 kW - power supply: 400V - maximum bread length: 410 cm - max bread width: 280 mm - max bread height: 160 mm The price is a net price. Paid options available: transport. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: used, Long arm Wire Stitching Machine Polygraph 781 Hnjdpfxjzzy U Uj Ab Iet Langarm-Drahtheftmaschine / Long arm Wire Stitching Machine Polygraph 781 Kartonagenhefter / Carton Stitcher Typ / Model 781/1Q50R Serial-No. 7160 Armlänge / Arm length 55cm Fußpedal / Foot pedal Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 1980, Martin Spindle Moulder Model: Martin T 23 Year of manufacture: 1980 Spindle diameter: 30 mm Spindle stroke: 145 mm Max. tool diameter: 250 mm Pole-changing motor: 4.7/5.7 kW 2 speeds: 3000, 6000 rpm Hnsdpsy Rzytofx Ab Ist Table size: approx. 940 x 1100 mm Table height: approx. 850 mm Automatic motor brake Emergency stop switch Weight: approx. 800 kg

Condition: good (used), functionality: fully functional, mileage: 53,968 km, power: 103 kW (140.04 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, empty load weight: 2,226 kg, maximum load weight: 1,274 kg, first registration: 01/2024, next inspection (TÜV): 09/2028, loading space length: 4,300 mm, loading space width: 1,832 mm, loading space height: 1,930 mm, emission class: euro6d-temp, color: white, number of seats: 3, number of previous owners: 1, Equipment: ABS, AdBlue, additional headlights, air conditioning, airbag, all-season tires, car registration, central locking, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, power assisted steering, rear view camera, sliding door, soot filter, trailer coupling, truck registration, AHK-3.0t Camera AdBlue Electric mirror adjustment Hodpfxoz A Apnj Ab Ijnt Air conditioning Multi-function steering wheel Headlight type: halogen Start/Stop system Cruise control Central locking Wheelbase: 133 cm ESP Rear door type: double doors Body capacity: 11 m3 Floor material: wood Door opening width: 153 cm Door opening height: 159 cm Light sensor Radio

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 1154, total height: 2,040 mm, total length: 2,200 mm, total width: 1,770 mm, type of input current: three-phase, table width: 400 mm, overall weight: 3,100 kg, table length: 600 mm, table height: 220 mm, empty load weight: 2,800 kg, table load: 450 kg, input voltage: 380 V, input frequency: 50 Hz, Equipment: documentation/manual, The Sodick AQ325L wire EDM machine was manufactured in 2002 by the Japanese company Sodic Co., Ltd. This is a precision CNC machine designed for cutting various shapes in conductive materials using the EDM (Wire Cut) method. This model combines a compact design with high machining accuracy, making it ideal for both single and serial production, especially for manufacturing parts with complex geometries. The machine offers a working area capable of machining parts with dimensions up to 350 × 250 × 220 mm and a weight of up to 450 kg. The stable construction and precise axis guidance ensure high repeatability and cutting accuracy, even with demanding materials and complex contours. Additional U and V axes allow for tapered cuts up to 20°, which significantly expands the technological capabilities of the machine. The Sodick AQ325L EDM machine operates with wire diameters ranging from 0.15 to 0.30 mm, offering adjustable wire tension over a wide range and a high wire feed rate, resulting in efficient and stable machining. The immersion system enables operation in a dielectric fluid, increasing the surface quality and dimensional accuracy of the machined parts. The Sodic AQ 325 L wire EDM machine is equipped with an efficient dielectric system with a capacity of 530 liters, featuring a filtration system based on replaceable paper filters and a deionizer, which guarantees the maintenance of appropriate operating parameters and a long service life for the components. The ergonomic table height and well-thought-out design facilitate operation and the preparation of parts for machining. Thanks to its robust construction, high weight, and proven technology from the manufacturer Sodick, the AQ325L model is a reliable solution for tool shops, production facilities, and companies involved in precision metalworking. Specifications of the Sodic AQ 325L Wire EDM Machine - Table travel (X / Y axis): 350 × 250 mm - Z-axis travel: 220 mm - Auxiliary table travel (U / V axis): 80 × 80 mm - Working table size: 600 × 400 mm - Working tank dimensions: 895 × 650 mm - Maximum workpiece height: 220 mm - Maximum workpiece height during immersion machining: 200 mm - Maximum workpiece weight: 450 kg - Maximum workpiece weight during immersion machining: 300 kg - Distance from the floor to the top surface of the table: 965 mm - Taper / cutting angle: 20° / 80 mm - Wire tension: 300–2300 g - Max. wire feed rate: 250 mm/s - Wire diameter: 0.15–0.30 mm - Max. wire spool weight: 6 kg - Machine dimensions (W × D × H): 1650 × 1900 × 2040 mm - Overall machine dimensions: 2250 × 2200 mm - Machine weight: 2800 kg Hnedpfx Aez Az Uvob Ist Dielectric tank - External dimensions (W × D × H): 550 × 2200 × 1770 mm - Weight of empty tank: 230 kg - Capacity: 530 l - Deionizer: 10 l Filtration system: 2 replaceable paper filters - Layout / arrangement as shown in the drawing - Total length of the system: 3000 mm - Total width of the system: 3500 mm - Power supply: 3-phase AC 220V (50/60Hz)

Condition: new, Year of construction: 2026, functionality: fully functional, power: 15 kW (20.39 HP), cutting height (max.): 210 mm, cutting width (max.): 820 mm, saw blade diameter: 550 mm, height adjustment type: pneumatic, saw blade bore: 80 mm, actuation type: electric, total length: 8,000 mm, total width: 1,510 mm, total height: 1,850 mm, overall weight: 2,600 kg, table height: 900 mm, Equipment: CE marking, rotational speed infinitely variable, saw blade guard, Longitudinal circular saws from the market leader, with Swiss quality! Cutting lengths: 2,200 - 11,200 mm Cutting widths: 420 - 3,000 mm Saw motor: 11 kW, optional 15 kW Hnjdpfx Aboz A S Umj Iet Max. cutting height: 210 mm Saw blade diameter: 450 - 620 mm Saw feed: Infinitely variable, from 0 - 80 m/min. Compressed air connection: 1/2”, 6 bar Required air volume: approx. 3500 m³/h

Condition: reconditioned (used), Year of construction: 1996, machine/vehicle number: 16319, Max. processing dimensions: 220 x 120 mm (Max. raw timber dimensions: 230 x 130 mm) Hedpfx Aeh Euvmsb Ijnt Min. processing dimensions: 15 x 6 mm Automatic positioning system: "Hecht-Posiomat" Feed rate: 6 - 22 m/min. Feed roller pressure: 6 bar Spindle diameter D = 40 mm Max. chip removal: 10 mm Infeed table: 2,000 mm Feed motor: 2.2 kW Height adjustment: 0.37 kW Surfacing spindle: 4 kW Jointing spindle: 4 kW Left profiling spindle: 4 kW Thicknessing spindle: 5.5 kW Glazing bead trimming Ex works, from the Seevetal location In "as is" condition, as inspected Subject to prior sale Excluding freight and packaging

Condition: like new (used), Year of construction: 2014, functionality: fully functional, GHD Georg Hartmann Maschinenbau GmbH, SELECTRA 25, 2014, good condition. Capacity: Up to 3000 products /h Product dimensions: Length: 160 - 400 mm, Height: 50 - 150 mm Hnsdpfx Asylurksb Ijt Power input: 5 kW Air: 6,0 bar Ready to ship