Used Cnc Flexible Working Center for sale (56,325)

Condition: excellent (used), 5-axis Bledpfsun Rqgox Amnoi Year of production: 2018 Machine working area dimensions for the X and Y axes: X 2100 mm Y 3100 mm Head stroke in the Z axis: 1250 mm Machine travel speed X, Y. Z: X: 80 m/min Y: 80 m/min Z: 12 m/min Vacuum table BECKER pump HITECO spindle in the HSK 63F standard Price of a new machine: approx. 135.000 €

Condition: used, Year of construction: 2016, travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 880 mm, 5-Axis Machining Center This machine was used as a showroom machine from 2016 to 2022. From 2022, the machine was used for production at HAL Plauen for the processing of axle carriers. Before being used for production, the machine was completely overhauled/refurbished. In December 2024, a new milling spindle was purchased (the spindle has approximately 500 operating hours). Machine operating hours: 24,000 Working area: -> X-axis 1500 mm -> Y-axis 1250 mm -> Z-axis 880 mm Feed rate / Rapid traverse: -> X-axis 100 m/min -> Y-, Z-axis 100 m/min Axis acceleration: -> X-, Y-axis 7 m/s² -> Z-axis 10 m/s² -> Jerk 150 m/s³ Table load capacity: -> Max. weight 400 kg Spindle: -> Tool holder HSK 100 -> Speed range 10,000 rpm -> Power (S6/40% duty) 40 kW -> Max. torque 175 Nm Tool magazine: -> Positions 36 -> Max. tool length 520 mm -> Max. tool diameter (with free adjacent slot) 205 mm -> Max. tool weight 20 kg -> Total load 200 kg -> Tool change time 3 s with chip conveyor and chiller/cooling unit • Manufacturer: Lahntechnik GmbH • Model: KESY 280-01 • Serial number: 2017-05981 • Year of manufacture: 2017 • Power rating: 13.6 kW • Nominal voltage: 400 V / 3~ / PE / 50 Hz • Control voltage: 24 V DC • Protection class: IP 54 Bsdjzc Ekrjpfx Amnoli • Refrigerant: R410A – 10.03 t CO₂ equivalent • Max. operating pressure: 30 bar (HD) / 19 bar (ND) • Empty weight: 400 kg • Country of origin: Germany The machine/asset does not include any product-related tools/fixtures or grippers (robots). The machine was taken out of production in October 2025 due to the factory closure. It is still powered on and can be inspected in that state. However, it cannot be put into operation for a trial run because no machine operator is available. Please review the videos available, which were taken of the machine in December 2025. Transport locks are not required. For loading and unloading, special Wenzler lifting/transport equipment is required. This equipment must be rented directly from Wenzler/Heller Group by the buyer. After lifting and unloading, the buyer must return the equipment to Wenzler.

Condition: excellent (used), Year of construction: 2015, X-axis 850 mm Y-axis 520 mm Z-axis 475 mm Spindle speed 10,000 rpm Spindle mount HSK 100 Tool changer 40 positions Bsdpfx Amewvr Tnenjli Control SIEMENS 840 Dsl Power 33 kVA Including internal coolant (IKZ) Including various tool holders Including measuring probe TS 649 Including Rotoclear Spindle hours: 10,730 h

Condition: excellent (used), Year of construction: 2007, X-axis: 1,600 mm Y-axis: 800 mm Z-axis: 740 mm Bjdpfxezcpplo Amnsli Max. workpiece size: 1,600 x 700 mm Max. table load: 1,200 kg Spindle speed: 12,000 rpm Tool holder: SK40 Tool changer: 24 positions Control system: HAAS Version M15 Includes 4th and 5th axes, ORIGINAL HAAS Includes chip conveyor Includes documentation

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 1114S49, rapid traverse X-axis: 5 m/min, rapid traverse Y-axis: 5 m/min, rapid traverse Z-axis: 10 m/min, bar passage: 26 mm, total height: 1,700 mm, total length: 7,000 mm, total width: 2,000 mm, overall weight: 3,000 kg, feed force Z-axis: 310 N, controller manufacturer: FANUC, controller model: SERIES 18i-TB, MANURHIN KMX 3260 CNC turning center - Stroke of the moving spindle carriage: 160 mm - Type of cross slide: two turret heads, 6 positions - Number of tool stations: 12 - For external machining: 1 - 12, for internal machining: 1 - 11 - With workpiece ejector - Stroke of the cross slide: 35 mm - Max. cross-section for external tools: 16 x 16 mm - Diameter of the internal tool holder: 25.4 mm - Ball screw diameter: 25 mm - Pitch: 5 mm - With C-axis - Driven tools - Incl. bar feeder FMB, type: TURBO 3-36 Note: The item must be collected between August 4th and August 13th, 2026, on a date to be confirmed. Bodpszdzfajfx Amnsli FCA D-79268 Bötzingen - loaded onto a truck.

Condition: used, Year of construction: 2022, power: 13 kW (17.68 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 8,500 kg, We are offering this used KiMLA BPF 2171 4-axis CNC machining center, manufactured in 2022. The package includes a KOGI dust extraction unit in a two-bag configuration (2.2 kW / 1,650 Pa), SCHMALZ distance and vacuum suction cups (suitable for 4-axis operation), an adjustable angular head for 4-axis machining, and a wide range of additional accessories. A valuation report is attached. Bsdpfx Amsy Exytonsli Key features 4-axis machine – wide machining capabilities HSD 9 kW spindle, 24,000 rpm, ISO30 Automatic tool changer Dual vacuum foot with automatic lowering system Working area: 2,100 × 7,100 mm Tandem working mode: simultaneous machining on one side of the table while loading/unloading parts on the other, significantly increasing productivity Large working area enabling machining of non-standard and extra-long parts Pneumatic positioning pin system for fast and precise material positioning SCHMALZ vacuum cups for high-quality workpiece holding Condition and usage Machine currently in continuous production (can be inspected in operation) Regularly serviced Ready for immediate deployment Inspection in person or video presentation is possible. Additional equipment Chip extraction system included Optional (separate offer) Becker VariAir Control vacuum system Possibility to operate 2–3 CNC centers simultaneously, significantly improving energy efficiency Machine data Type: BPF Model: 2171 Serial number: 3586 Year of manufacture: 2022 Power supply: ~400 V Frequency: 50 Hz Power: 13 kW Weight: 8,500 kg Air pressure: 8 bar Axis travel (X × Y): 2,100 × 7,100 mm Z-axis travel: 400 mm Spindle: HSD 9 kW, 24,000 rpm, ISO30 Table type: Vacuum table Control system: 3D control module Drives: Digital AC servo drives Technology: High-Speed Machining (HSM) Tool length correction sensor included Control computer and operator panel included C-axis for angular aggregates Adjustable angle aggregate Extraction hood with support foot Automatic tool changer Rotary tool magazine Positioning pins, automatic (2 × 7 pcs) Base positioning pins (4 pcs) 6 SCHMALZ vacuum cups (single-ring type) PC-CAM machine control software Control system with dynamic toolpath optimization improving cutting smoothness and feed dynamics Integrated CAD/CAM module for part design and toolpath generation Remote diagnostics via internet Electronic gantry angle correction 20 kHz position controller frequency enabling higher dynamics, especially in curves Direct support for .dxf and .dwg files in control system Real-time hardware interpolation via control computer Should you have any questions or require additional information, please do not hesitate to contact us by email or telephone.

Condition: good (used), Year of construction: 2016, functionality: fully functional, HAAS ST-40L CNC lathe, year of manufacture 2016, C-axis, driven tools, tailstock, steady rest, extended bed The machine is equipped with a C-axis, driven tools, programmable tailstock, Kitagawa hydraulic steady rest, chip conveyor, and accessories. The machine is powered on and available for testing by appointment. Machine basic specifications: Manufacturer: HAAS Automation, Inc. Model: ST-40L Year of manufacture: 01/2016 Serial number: 3104909 Control system: HAAS CNC Power supply: 3 × 400 V / 50 Hz Machine weight: approx. 14,062 kg Design: extended bed ST-40L Technical parameters: Max. swing diameter over bed: 876 mm Max. turning diameter: 648 mm Max. turning length: 2,032 mm X-axis travel: 432 mm Z-axis travel: 2,032 mm Work travel X/Z: 18 / 8.1 m/min Rapid traverse X/Z: 18 / 8.1 m/min Positioning accuracy: 0.005 mm Repeatability: 0.003 mm Spindle Spindle: A2-8 Spindle bore: 102 mm Spindle bore diameter: 117 mm Max. spindle speed: 2,400 rpm Spindle power: 30 kW / 40 HP Torque: 1,898 Nm at 150 rpm Chuck: hydraulic 3-jaw Kitagawa B15, diameter 381 mm Turret and driven tools Turret: 12-position combined turret Tool clamping: 6× VDI 40 / 6× BOT Driven positions: every other position in the turret Tool drive: yes C-axis in the spindle: yes Max. speed of driven tools: 0–6,000 rpm Power of driven tools: 9.3 kW C-axis positioning: 0.001° Continuously controlled C-axis in the spindle: yes Tailstock and steady rest Programmable tailstock: yes, servo-controlled Tailstock taper: MK5 Tailstock clamping force: 1,334–6,672 N Hydraulic steady rest: Kitagawa 1131 Steady rest range: 110–310 mm Separate oil lubrication for the steady rest: yes Max. steady rest speed: 650 rpm Blodpfx Amjzgv E Hjnsi Max. clamping force of the steady rest roller: 20 kN Machine equipment The machine is equipped with: HAAS CNC control system, C-axis, driven tools, 12-position turret with 6× VDI / 6× BOT, programmable tailstock, Kitagawa 1131 hydraulic steady rest, Kitagawa B15 hydraulic chuck, chip conveyor, cooling unit, automatic central lubrication, manual spray gun for coolant, manual air blow gun, remote jog handle, USB port, work area lighting, set of tool holders and accessories. Accessories The machine comes with accessories as shown in the photos, including: ER32 driven tool holders, VDI/BOT tool holders, set of hard jaws for Kitagawa B15 chuck, additional jaws, sleeves and clamping elements. Operating hours According to the display on the control system: Cycle start time: approx. 7,208 h Cutting time with feed: approx. 5,989 h Machine condition The machine is currently in operation and powered on. Inspection and testing are possible by appointment. The technical condition corresponds to the normal operation of a used machine.

Condition: good (used), Year of construction: 2009, functionality: fully functional, Control system: Siemens / ShopTurn Max. turning diameter: approx. 385 mm Max. turning length: approx. 650 mm Bsdpfozgvf Tox Amnoli Power supply: 400 V Frequency: 50/60 Hz Power consumption: 21 kVA Max. current: 31 A CE: yes

Condition: good (used), Year of construction: 2011, Maximum machining diameter 42mm, maximum machining length 175mm, spindle power 7.5/5.5Kw , spindle speed 5,000rpm, 8 station turret, Bledpfxszg Egmj Amnji milling speed 5,000rpm, Fanuc OI-TD control, 3 jaw chuck, parts catcher.

Condition: excellent (used), Year of construction: 2019, Swing 806mm, Swing over cross slide 527mm, maximum cutting diameter 457mm, 762mm between centres, 584mm maximum cutting length, 0.01 degree C axis, 3000rpm Milling 3.7kW, +/- 50mm Y axis, 76mm Bar capacity, Bsdpezg Efisfx Amnsli 22.4kW Spindle Motor, 3400rpm spindle, 24m/minute rapid feedrate, 24 Station turret, swarf conveyor, tailstock, tool setter, coolant,

Condition: good (used), Year of construction: 2015, Ref. -No.: 10647 Manufacturer: DMG MORI Type: DMF 360-11 Year of construction: 2015 Type of control: CNC Control: Heidenhain iTNC 530 Storage location: Halberstadt Country of origin: Germany Serial no.: 2903XXXX Machine-No.: 591XX X-Travel: 3600 mm Y-Travel: 1100 mm Z-Travel: 900 mm Max. Workpiece Weight: 8000 kg Max. Tool Weight: 5 kg Max. Tool Length: ab Spindelnase 300 mm Workpiece Diameter With 2 Vacant Positions: 130 mm Tool Taper: HSK 63 Numbers Of Tools In Magazin: 120 Tool changer: 60 Spindle Speed: 20000 RPM Max. Torque: 288 / 187 Nm Rapid Travel X/Y/Z: 80 x 60 x 60 mm / min Main Drive: 35 / 25 kW Internal cooling: 40 bar coolant reservoir: 600 L. Blodpfxszc D Hfs Amnji Further information: - Fixed table, often with an integrated NC rotary table (FD version) - Spindle: Standard speed is typically 10,000 rpm; more powerful variants are available as an option - Traveling column design: Ideal for pendulum machining and long workpieces - Stability: The mineral cast machine bed ensures high damping and precision - 5-axis: Usually equipped with an NC swivel milling head (B-axis) The machine can be viewed while powered on by appointment.

Condition: good (used), Year of construction: 2002, Ref. -No.: 10633 Manufacturer: ANAYAK Type: VH Plus 2000-MG Year of construction: 2002 Type of control: CNC-Steuerung Control: Heidenhain Storage location: Halberstadt Country of origin: Germany serial number: M200XXX X-Travel: 2000 mm Y-Travel: 1500 mm Z-Travel: 1500 mm No. Of Working Stations: 90 Blodpfxezc D Ene Amnji Control: 106.253 H machine: 93.170 H Program run: 41.859 H Head and turntable: 1600 x 1450 mm

Condition: good (used), Year of construction: 2008, Ref. -No.: 10628 Manufacturer: AUERBACH Type: IA 5B 3200 RT Year of construction: 2008 Type of control: CNC-Steuerung Control: Heidenhain Storage location: Halberstadt Country of origin: Germany X-Travel: 3200 mm Y-Travel: 2000 mm Z-Travel: 1600 mm Rotary Table (Lxw): 2500 x 2000 mm No. Of Working Stations: 60 Machine length: 7300 mm Machine width: 7700 mm Machine Height: 4350 mm Weight Of The Machine Ca.: 28 t Further information: - with -H / V- head Bedjzc D D Repfx Amnsli Machine can be viewed under power by arrangement

Condition: good (used), Year of construction: 2000, Ref. -No.: 10588 Manufacturer: HEDELIUS Type: CB 70 - 3200 Year of construction: 2000 Type of control: CNC-Steuerung Control: Heidenhain TNC Storage location: Halberstadt Country of origin: Germany Machine-No.: 0032XXXX Space requirement: 7200 x 3400 x 3100 Length x width x height (mm) X-Travel: 3200 mm Y-Travel: 720 mm Z-Travel: 600 mm Table Height: 900 mm Number of T-slots: 5 Max. Workpiece Weight: 3000 kg Max. Tool Length: 330 mm Clamping Area: 3900 x 650 mm T - groove width: 18 mm T - slot spacing: 125 mm Blodpfx Aszc D Atsmnsi Tool Taper: DIN 69871 AD 40 Spindle Speed: 30 - 8000 RPM Max. Torque: 102 x 240 Nm Feed Speeds X/Y/Z Axis: 30000 mm / min Rapid Travel X/Y/Z: 30 / 30 / 30 mm / min Total Power Requirement: 50 kW Borehole Diameter: 28 x 44 mm Max. Feed force: 9000 / 9000 / 9000 kN Distance between spindle nose and table: 140 - 740 mm Number of tools: 30 Pcs Tool clamping: Tellerfeder Max. milling capacity: 400 x 600 Max. thread diameter: M20 x M30 mm coolant: 250 bar Further information: - L = 7.50 m Special accessory: automatic door - H = 3.60 m Special accessory: full cladding of working area - Ø 125 mm only with free side spaces 35 mm The machine can be viewed under power by arrangement.

Condition: good (used), Year of construction: 2008, Ref. -No.: 10581 Manufacturer: HEDELIUS Type: RS 80 Magnum Year of construction: 2008 Type of control: CNC-Steuerung Control: HEIDENHAIN iTNC 530 Storage location: Halberstadt Country of origin: Germany X-Travel: 945 mm Y-Travel: 800 mm Z-Travel: 600 mm C-Axis: 360.000 x 0,001 ° Spindle Taper: ISO 40 Blodezc D Agepfx Amnoi Table Load: 600 kg Tool changer: 30 fach Spindle Speed: 10 - 8000 RPM Drive Capacity - Spindle Motor: 27 kW Total Power Requirement: 55 kW Weight Of The Machine Ca.: 16 t A-axis (swivel axis): ° Table clamping area: 800 x 630 mm Further information: - Pendulum machining with swivel rotary table and fixed machine table - Coolant system, chip conveyor - Complete housing The machine can be viewed under power by arrangement.

Condition: good (used), Year of construction: 2014, Ref. -No.: 10553 Manufacturer: HANDTMANN / BAVIUS Type: HBZ Trunnion 120 Year of construction: 2014 Type of control: CNC-Steuerung Control: Heidenhain TNC 640 Storage location: Halberstadt Country of origin: Germany Machine-No.: 200XXXXX X-Travel: 1270 mm Y-Travel: 1100 mm Z-Travel: 900 mm Table Height: Ø 1200 mm Table Load: 2000 kg Max. Tool Weight: 20 kg Max. Tool Length: 90 x 200 / 24 x 400 mm Max. Tool Diameter: Ø 130 mm Tool Taper: HSK 100 Numbers Of Tools In Magazin: 40 Tool Piece Magazine With: 140 Pcs./pcs. Bljdpfx Aszc D Aaomnei Spindle Turning Speed - Stepless: 14.000 RPM Max. Torque: 15000 Nm Rapid Traverse X-Axis: max. 60 m / min Rapid Travel Y-Axis: max. 60 m / min Rapid Traverse Z-Axis: max. 60 m / min Machine length: 7500 mm Machine width: 5500 mm Machine Height: 3500 mm Weight Of The Machine Ca.: 26 t Rapid traverse C-axis: max. 25 RPM Rapid traverse A-axis: max. 20 RPM A-axis (swivel axis): - 30 / + 120 ° C-axis (rotary table axis): 360 ° Further information: - Horizontal machine, Y-axis arranged vertically - Machine stand designed as a welded construction - set up on height-adjustable precision wedge shoes, chip tray with cooling lubricant device, for external splash water cooling capacity: approx. 400 liters, with clean water pump, LP circuit, approx. 40 1/min at approx. 5 bar and rinsing nozzles on the Z-axis and/or the spindle - Complete safety housing - Stainless steel interior lining - Work area lighting - Manual loading door to the work area with polycarbonate safety window with glass front panel - Side viewing window to the work area with polycarbonate safety pane with glass front pane - Maintenance area freely accessible - HSK 100 hollow shank taper - Tool clamping via springs, tool release hydraulically - Tool clamping control - Cone cleaning - incl. spindle orientation The machine can be viewed under power by arrangement.

Condition: good (used), Year of construction: 2011, Ref. -No.: 10489 Manufacturer: DMG Type: DMC 60 U duoBLOCK Year of construction: 2011 Type of control: CNC-Steuerung Control: SIEMENS SINUMERIK 840D Storage location: Halberstadt Country of origin: Germany Machine-No.: 11XX000XX01XX Major overhaul: 2025 X-Travel: 600 mm Y-Travel: 700 mm Z-Travel: 600 mm B-Axis: -30 - 180 ° C-Axis: 0,00 ° Spindle Taper: HSK A63 DIN 69893 Max. Workpiece Weight: 600 kg Max. rotary table diameter: 630 O Table speed range: 40 min/-1 Tool Piece Magazine With: 60 Pcs./pcs. Turning Speed Range - Stepless: 20 - 18.000 RPM Max. Torque: 121 / 82 Nm Feed force (X / Y / Z): 10 kN Rapid Travel X/Y/Z: 60.000 mm / min Drive Capacity - Spindle Motor: 28 / 19 kW acceleration: 6 m/s² Total Power Requirement: 55 kW Weight Of The Machine Ca.: 12 t Dimensions Of The Machine Ca.: 7,0 x 5,0 x 3,2 m Numbers Of Pallets: 2 Size Of Pallet: 630 x 630 mm Tool change time: 3,7 s Further information: DMG DMC 60 U – 5-Axis Universal Machining Center (Year 2011) The machine is currently still in production and has been used exclusively for aluminum machining in single-shift operation. It is equipped with a pallet changer and a high-pressure cooling system (30 bar). In 2024, extensive maintenance and refurbishment work was carried out: ✅ All axes (except the Z-axis) were renewed ✅ Guideways were replaced ✅ Spindle was overhauled Maintenance and service reports, as well as all relevant documentation, are fully available. More technical Specifications: 🔹 Working ranges: Distance spindle center – table (horizontal): 20 – 620 mm Distance spindle center – table (vertical): 120 – 720 mm Distance spindle nose – table (horizontal): -150 – 550 mm Distance spindle nose – table (vertical): -250 – 450 mm Features & Accessories ✅ Complete documentation available ✅ Chip conveyor for efficient chip removal Bsdpfxjycpxgj Amnjli ✅ Cooling system with high-pressure cooling (30 bar) ✅ Internal coolant supply for optimal machining ✅ Pallet changer for uninterrupted operation ✅ Rotating sight glass for clear process visibility ✅ Renishaw OMP 60 probe for precise workpiece measurement ✅ Electronic handwheel for easy manual control ✅ Oil mist extraction for a clean working environment ✅ Paper band filter for effective coolant filtration ✅ Spindle oil cooler for temperature stabilization The machine can be inspected and tested under production conditions by appointment. 📍 Availability: Upon agreement

Condition: good (used), Year of construction: 2007, Ref. -No.: 10473 Manufacturer: HEDELIUS Type: C60 - 2000 Year of construction: 2007 Type of control: CNC-Steuerung Control: Heidenhain iTNC 530 Storage location: Halberstadt Country of origin: Germany X-Travel: 2000 mm Y-Travel: 620 mm Z-Travel: 520 mm Table Height: 860 mm Max. Workpiece Weight: 2000 kg Max. Tool Length: 330 mm Max. Tool Diameter: 80/125 mm Clamping Area: 2500 x 600 mm T - groove width: 18 mm T - slot spacing: 100 mm Numbers Of Tools In Magazin: 30 Turning Speed Range - Stepless: 30 - 8000 RPM Max. Torque: 198 Nm Rapid Travel X/Y/Z: 45000 mm / min Number of radial T-slots: 5 Machine length: 5400 mm Machine width: 3300 mm Machine Height: 3000 mm Weight Of The Machine Ca.: 10,5 t Blodpfx Aszc Dzpjmnji Further information: Distance spindle nose - table: 100 - 620 mm Tool clamping: disk spring Machine can be inspected under power by arrangement.

Condition: good (used), Year of construction: 2000, Ref. -No.: 10468 Manufacturer: DECKEL MAHO Type: DMU 80 Blodpfx Amszc Dzisnei Year of construction: 2000 Control: Heidenhain Millplus Storage location: Halberstadt Country of origin: Japan Machine-No.: 111xxxxx X-Travel: 800 mm Y-Travel: 700 mm Z-Travel: 600 mm Number of T-slots: 9 / 14 Clamping Area: Ø 900 x 630 mm T - slot spacing: 63 mm Tool Taper: SK 40 Tool changer: 30 Spindle Speed: 12.000 RPM Max. Torque: 2659 Nm Operating hours: 67.452 H Center hole: Ø 50 mm Holding torque: 4500 Nm Max. rotation of the table top: 10,7 rpm Feed: 3600 °/min. Resolution of the measuring system: 0,001 ° NC rotary table: 800 kg NC swivel rotary table: 600 kg Further information: - Clamping table 900 x 630 mm - Chip conveyor, sheet metal technology - Belt filter system, manufacturer Interlit - Type SK 200-760 - Oil mist separator - Set of tool holders, - Workbenches - 2x 6 drawers - Vise - Jaw width 125 mm - Roller shutter cabinet with 1 door The machine can be viewed under power by arrangement.

Condition: good (used), Year of construction: 2016, Ref. -No.: 10411 Manufacturer: BROTHER Type: Speedio S700X1 Year of construction: 2016 Type of control: CNC-Steuerung Control: BROTHER CNC Storage location: Halberstadt Country of origin: Germany X-Travel: 700 mm Y-Travel: 400 mm Z-Travel: 300 mm Main spindle drive power: 15,4 kW Main spindle speed range: 16 - 16.000 RPM Table surface: 800 x 400 mm Distance Spindle /Table: 180 - 480 mm Table Load: 300 kg Max. Tool Weight: 25 kg Max. Tool Length: 250 mm Max. Tool Diameter: 110 mm Tool change time: 0,8 s Tool Taper: BT 30 Tool Piece Magazine With: 21 Pcs./pcs. Feed Speeds X/Y/Z Axis: 10.000 - 20.000 mm / min Rapid Traverse X-Axis: 50 m / min Rapid Travel Y-Axis: 50 m / min Rapid Traverse Z-Axis: 56 m / min X - axis acceleration: 2,0 G Y - Axis acceleration: 1,3 G Z - axis acceleration: 2,2 G Acceleration time: 0,30 sec Machine length: 2360 mm Machine width: 2120 mm Machine Height: 2500 mm Weight Of The Machine Ca.: 2,4 t Further information: THREAD Speed: 6,000 rpm Acceleration time: 0.11 s CUTTING CAPACITY Drilling capacity in aluminum: max. 24 mm / F0.2 Drilling capacity in C45 steel: max. 18 mm / F0.1 Tapping capacity in aluminum: max. M22 Tapping capacity in C45 steel: max. M14 Milling capacity in aluminum: max. 660 cm³/min. Face milling cutter: Ø 100 / depth 2.2 mm / F=3000 Bjdpfszc Dyrox Amnsli Milling capacity in steel C45: max. 48 cm³/min. Face milling cutter: Ø 40 / depth 2.5 mm / F=484 HIGH-SPEED TOOL CHANGER Stations with directional logic: 21 Change time T - T: 0.8 seconds Changeover time C - C at n=10,000 rpm and XYZ positioning: 1.4 seconds Positioning accuracy: ± 0.006 mm Repeat accuracy: ± 0.004 mm Accuracy of thread depth: 0.05 mm Air consumption: 45 l/min Air pressure: 0.5-0.6 MPa Air quality: 99% anhydrous Including FANUC robot / automation Machine can be inspected under power.

Condition: good (used), Year of construction: 2008, Ref. -No.: 10335 Manufacturer: HüLLER HILLE Type: NBH 170 Year of construction: 2008 Type of control: CNC-Steuerung Control: Sinumerik 840D pl Storage location: Halberstadt Country of origin: Germany X-Travel: 1000 mm Y-Travel: 800 mm Z-Travel: 800 mm B-Axis: 360 ° Distance spindle center - table: 150 mm Table Dimensions (Lengthxwidth): 500 x 630 mm Table Load: 800 kg Max. Workpiece Weight: 40 kg Bljdpfxjzc Dylj Amnoi Max. Tool Length: 650 mm Max. Tool Diameter: 325 mm Workpiece Diameter At Full Load: 100 mm Tool Taper: HSK - 100 Spindle Speed: RPM Rapid Traverse: 60 m / min Machine length: 9500 mm Machine width: 4500 mm Machine Height: 3500 mm Further information: Coolant system = 1250 l

Condition: used, functionality: fully functional, CNC Machining Center MAHO MH 600 C – fully working, under power For sale CNC machining center MAHO MH 600 C, manufactured by MAHO AG (Germany). The machine was used in production and was operating until recently. It is fully functional and can be demonstrated under power. Control system: Grundig / Philips CNC 532 Serial number: 661999 Equipment: Bsdpfx Amjzgcifenjli • Philips / Grundig CNC 532 control • automatic tool magazine (30 positions) • rotary table (4th axis) • coolant system • full machine enclosure Technical data: • X travel: 600 mm • Y travel: 450 mm • Z travel: 450 mm • spindle taper: SK40 • spindle speed: up to approx. 6300 rpm • tool magazine: 30 positions • machine weight: approx. 3.6 t Condition: • fully operational • used in production until decommission • available for inspection under power

Condition: good (used), Year of construction: 2014, functionality: fully functional, Equipped with B-Solid software. Maximum workable height: 120 mm Maximum workable length with automatic feed: 3200 mm Tool changer with 22 positions Includes a new Quattro drilling unit. Bjdpfx Aevr D Sijmnoli

Condition: like new (used), Year of construction: 2023, MAZAK INTEGREX i-250H S Blodpfszdkr Aox Amnei Max. machining diameter: 670 mm Max. machining length: 1,011 mm Max. milling speed: 12,000 rpm Max. spindle speed: 5,000 rpm Max. bar diameter: 65 mm The machine is equipped with: - CNC control system Mazatrol SmoothAi - IRCO short bar loader magazine - Integrated robot system TA20/200 - Tool magazine for 112 tools (HSK) - Three-jaw chuck for main spindle, diameter 254 mm - Three-jaw chuck for second spindle, diameter 254 mm - Tool Eye - C-axis - Y-axis - B-axis - Counter spindle with full C-axis - Interface for bar loader magazine - Automatic parts catcher - 5-axis machining, basic package - Preparation for multi-tool and flash tool holders - Preparation for MAZAK Monitoring System B - High-pressure pump, 70 bar - KNOLL compact filter system KF400/2300

Condition: ready for operation (used), Year of construction: 2004, 5-axis CNC machining center MAKA MM 7t, portal design with two tables and two 5-axis head units for alternating operation. Year of manufacture: 2004 • High-performance CNC milling center for 5-axis machining, ideal for machining aluminum components / deep-drawn parts / GRP parts. • Equipped with automatic central lubrication and control cabinet with air conditioning unit. • CNC control BWO 920, memory 8 MB, in the integrated PC. • Mobile control panel stand. Technical data: Working areas / cubic dimensions: with tool length 130 mm and -Ø 60 mm X-axis: 2 x 2,000 mm Y-axis: 2,250 mm Z-axis: 480 mm, at 120 mm fixture height A-axis: 540° (+/- 270°) B-axis: 200° (+/- 100°) Rapid traverse speed: X/Y-axis: 60 m/min. Bsdpfx Amjzhvxponeli Z-axis: 24 m/min. A/B-axis: 10,000 °/min. 2 x universal head for 5-axis milling with 90° head, 2 high-speed milling spindles HSD 7.5 kW (S1), HSK-F63 Speed infinitely adjustable from 2,000 – 24,000 1/min., Rated power from 12,000 1/min., with ceramic bearings, water-cooled. Tool holder HSK-F63 with tool changer. 1 rotating drum tool magazine per head unit, for 10 tools up to Ø 60 mm and – depending on the tool diameter – 130 mm length from the reference plane. 2 tables with aluminum table top 2,000 x 2,250 mm with grid drilling. 1 pneumatic clamping system per table. 1 vacuum clamping system per table. 2 minimum quantity lubrication systems with spray nozzles. Work safety: 2 sliding doors to be operated manually, for front loading. In alternating operation, the loading and unloading area is secured with two electrically driven roller shutters, 1 separating partition (removable) between the tables. With protective cabin for the rear of the machine, side access door, the cabin is open at the top. Current location: southern Thuringia / Germany, where the machine can be inspected.