Used Collet Sleeves 10 Pieces for sale (36,678)

Year of construction: 2001, condition: ready for operation (used), total height: 1,300 mm, product length (max.): 2,500 mm, Casing press manufactured in 2001. This LIGMATECH Optimat MDE 10 features adjustable pressing forces applied both vertically and horizontally, ensuring precise operation. The machine allows for casing dimensions ranging from 300 to 2500 mm in length and 300 to 1300 mm in height. If you are looking to get high-quality casing capabilities, consider the LIGMATECH Optimat MDE 10 machine we have for sale. Contact us for further details. • Casing dimensions: • Length: 300–2500 mm • Height: 300–1300 mm • Depth: 120–600/800 mm • Pressing system: • Pressing forces generated electrically in both horizontal and vertical directions, adjustable separately • Vertical pressing via pressure plate • Horizontal pressing via 3 pressure cheeks on each side • Pressing is center-aligned at a zero line on the operator side • Positioning of pressure cheeks: • Upper pressure cheek: forced guidance on the upper pressure plate; optionally lowerable via a cylinder Bdsdpfoy Uw Egjx Aproc • Middle pressure cheek: freely programmable, motor-driven • Lower pressure cheek: freely programmable, movable via a common drive with the middle pressure cheek

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, warranty duration: 12 months, input voltage: 230 V, DGUV certified until: 06/2027, input frequency: 50 Hz, electrical fuse: 10 A, power: 0.5 kW (0.68 HP), Planetary mixer mixer Model: PL 10 sophisticated technology ... already proven many times! simple manual operation Bdjdpfx Aefxk Unsprjc 3 transmission gears 1 stainless steel kettle 10 liters 1 flat beater 1 dough hook 1 broom Boiler protective grille / access protection Table machine with bowl lift Connection 220V, 550 watts DGUV V3-tested TOP quality and price in one machine! NEW machine exhibition machine Visit our Milbrandt outlet with a show bakery and many bakery machines and devices!

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 850 mm, travel distance Z-axis: 200 mm, spindle motor power: 39,000 W, spindle speed (max.): 6,000 rpm, workpiece diameter (max.): 200 mm, overall weight: 12,000 kg, number of axes: 4, This 4-axis EMAG VSC 200 TWIN OP 10 was manufactured in 2005. It features simultaneous machining of two workpieces, independent X and Z axis drives, and a maximum chuck diameter of 250 mm. With a rapid traverse of 45 m/min on the X axis and 30 m/min on the Z axis, this vertical turning machine offers efficient performance. If you are looking to get high-quality turning capabilities, consider the EMAG VSC 200 TWIN OP 10 machine we have for sale. Contact us for further details. • Operation Type: OP 10 • Simultaneous Machining of Two Workpieces: Yes • Independent X and Z Axis Drives: Yes • Independent Measuring Systems: Yes • Maximum Chuck Diameter: 200 / 250 mm • Swing Diameter: 260 mm • Maximum Workpiece Diameter: 200 mm • Loading Time: 2–4 s • Front Spindle Bearing Diameter: 100 mm Bdodoy Uuxkspfx Aprsc • Maximum Spindle Speed: 6,000 rpm • Main Drive Type: Asynchronous Motor • Spindle Power 40% Duty Cycle: 39 kW • Spindle Power 100% Duty Cycle: 28 kW • Torque 40% Duty Cycle: 460 Nm • Torque 100% Duty Cycle: 340 Nm • Full Power Available From: 800 rpm • Rapid Traverse X Axis: 45 m/min • Rapid Traverse Z Axis: 30 m/min • Feed Force X/Z: 11 kN • Ball Screw Diameter X/Z: 50 / 40 mm • Tool Stations: 2 × 8 • Tool Holder Standard: DIN 69 880 • Tool Shank Diameter: 40 mm • Turret Index Time: 0.3 s • Machine Bed Material: Polymer Concrete MINERALIT® • Operating Voltage: 400 V • Control Voltage DC: 24 V • Control Voltage AC: 230 V • Frequency: 50 Hz • Connected Load: 66 kW • Fuse Protection: 160 A • Approximate Machine Weight: 12,000 kg • Electrical Standard: VDE 0113 • Available Control Systems: FANUC 31i / 32i, Siemens SINUMERIK 840 D, Bosch Rexroth MTX • Automatic Workpiece Loading and Unloading: Yes • Vertical Workpiece Clamping: Yes The technical specifications may vary slightly, as these are custom-made machines! Technical Specification Driven Tools No

Condition: as good as new (ex-display), JUNE OFFER. FOR THE WHOLE OF JUNE -10% off all welding machines We offer welding machines in a wide variety of configurations and always have several sets in stock. CMT / ROBOT / CMT UNIVERSAL hose packages or HOLLOW SHAFT robots. Everything in stock and available immediately! Don't hesitate to request your customized configuration! We also have a wide variety of spare parts -30% -50% -70% in stock. Just send us a quick email, call us, or WhatsApp us. CMT MACHINES at 1/3 the new price! - 66% DISCOUNT ALL MACHINES CAN BE VIEWED IN VIENNA and PURCHASED WITHOUT WAITING! Bedpohzhynsfx Aprjdc The prices listed are all starting from ... euros. The prices/offers are created individually according to the device configuration. .) Fronius power source (TPS 4000 CMT) .) Fronius cooling unit (FK 4000) Vufdfi .) Fronius VR CMT wire feeder .) Fronius intermediate hose package .) Fronius trolley .) Fronius hose package CMT robot .) Fronius RCU 5000i Example images of the product. Please see the numerous YouTube videos on the topic of CMT! Also available via WhatsApp and Viber Stocked in Vienna 1230 (Vienna) Shipping on pallets available for an additional charge: Austria approx. 180 euros Germany approx. 230 euros Europe upon request All prices are starting from prices. You can configure the devices with us. Robot device or handheld device. Long connecting hose package or short. Various hose packages to choose from. Synchropuls. 270 400 or 500 amp units in stock. CMT versions available as handheld or robotic. It's best to call us. We'll discuss your application and give you an initial price estimate.

Condition: good (used), Year of construction: 1996, Distance between saws at 90°max : 4000 mm Cutting height at 90° : 200 mm Bodpfogixvwex Apredc Cutting with: 130 mm Power: 5,1 kW Weigth: 1260 kg

Condition: like new (used), Year of construction: 2018, operating hours: 9,251 h, functionality: fully functional, type of input current: three-phase, We offer this used Haas ST-10 CNC turning-milling center, year of manufacture 01/2018. Serial number: 3109692 On timer: 9,251 h Cut in move timer: 2,484 h Max. capacity: 14" x 16" (356 x 406 mm), 1.75" (44 mm), 16.25" (413 mm) bore, Bsdpfoy D Eprsx Apredc 15 hp (11.2 kW) vector drive, 6,000 rpm, A2-5 spindle, 6.5" (165 mm) chuck, 12-position bolt-on turret, 15" color LCD monitor, Memory lock switch, expanded memory, USB port Direct tapping, synchronized tapping, Automatic tool probe, Swarf conveyor, Hydraulically operated tailstock, Oil mist extraction, Haas Visual Quick Code, 12-piece holder set. If you have any further questions or need more information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2009, load capacity: 1,000 kg, lifting height: 1,700 mm, fuel type: electric, remaining battery capacity: 100 %, color: green, Pramac forklifts. Model GX 10-16. Year of manufacture 2009. 2 brand new batteries. Maximum lifting height 1700 mm. Lifting capacity 1000 kg. Bsdpfx Aey Uacbjprodc In very good condition.

Condition: ready for operation (used), Centrifugal pump, vertical centrifugal pump, pump, DPVSF 10/15B 5.18 kW, Used machine Manufacturer: DPVSF 10/15B Type: Frame 132 (5.18 kW) Electrical data: 400V; 10A; 5.18 kW Bodsv Dr Dkepfx Aprsdc Flow rate: 10.23 m³/h Head: 123 m Year of manufacture: 2016 Overall dimensions: Length: 300 mm Width: 300 mm Height: 1200 mm

Condition: ready for operation (used), Centrifugal Pump, Pump, Grundfos 4 kW, Used Machine Bdedpov Dr Icefx Aprsc Manufacturer: Grundfos Type: CR 10-12 A-A-A-V-HQQV Overall Dimensions: Length: 255 mm Width: 240 mm Height: 1040 mm Flow Rate: 10 m³/h Head: 96.7-122 m Year of Manufacture: 2020 Electrical Data: 400V; 4 kW; 7.9 A

Condition: used, Year of construction: 2006, Liebherr top-slewing crane 180 EC-H 10 Litronic, works number 45.455 Used Liebherr top-slewing crane 180 EC-H 10 Litronic, manufactured in 2006. The top-slewing crane with a 50.0 m reach is offered for sale. Suitable for high-rise construction, industrial, and large construction sites. Bdjdpfxjy Thfbs Aprjc Manufacturer: Liebherr Model: 180 EC-H 10 Litronic Machine type: Top-slewing crane Works number: 45.455 Year of manufacture: 2006 Reach: 50.0 m Load capacity class: 10 t Control system: Litronic Design: Top-slewing crane only Application area: High-rise construction, industry, construction sites Condition: used

Condition: used, Year of construction: 2005, Liebherr top-slewing crane 180 EC-H 10 Litronic, serial number 44.173 Used Liebherr top-slewing crane 180 EC-H 10 Litronic, manufactured in 2005. The top-slewing crane, with a 45.0 m reach, is offered for sale. Suitable for high-rise construction, industrial projects, and large construction sites. Manufacturer: Liebherr Bdjdpfx Apey Thdqsroc Model: 180 EC-H 10 Litronic Machine type: Top-slewing crane Serial number: 44.173 Year of manufacture: 2005 Reach: 45.0 m Load capacity class: 10 t Control system: Litronic Design: Top-slewing crane only Application area: High-rise construction, industry, construction sites Condition: used

Condition: good (used), approx. 200 pcs. shelf dividers (free standing) for shelf racks type 2510, SSI Schäfer - second-hand - : Bjdpfx Aokhd Uispredc Prices per piece ex location: 2.- € (net) disassembled, packed and loaded! Manufacturer: SSI Schaefer type: TRF 25 10 year of construction: unknown galvanized new price: approx. 5.-€ Condition: good Available: immediately Location: Warehouse Frankenberg (Saxony)

Condition: good (used), Year of construction: 2013, Scissor lift table with ramp, platform 1.50 m x 0.77 m, 500 kg – used – : Ex-works price: only €1,250 (net), dismantled, packed, and loaded! Manufacturer: Intraboss Bdjdpfxswxvzno Aproc Model: ELS 0.5 10-5G-SO Year of manufacture: 2013 Load capacity: 500 kg Platform size: Depth: approx. 1.50 m Width: approx. 0.77 m Overall height: approx. 20 cm Lift height from floor: approx. 1.17 m Own weight: 300 kg 400V, control voltage 24V, 1.1 kW, IP 54 Condition: good Available: immediately Location: Warehouse Frankenberg (Saxony)

Condition: new, - Exhibition machine - For continuous air demand and intermittent operation Electronic control for reliability and efficiency. Increased flexibility thanks to two compressed air tanks High-quality and expandable equipment. Smooth and quiet running. Can also be used in intermittent intermittent operation. DUO KK equipment with refrigeration dryer and fine filter as pre-filter before the refrigeration dryer Condensate conditioner for oil-water separation Automatic condensate drain. ----- Technical data ----- Tank size: 2 x 100 liters, Effective delivery volume approx. 380 liters, Maximum pressure: 10 bar, Motor: 4.0 kW, Speed: 2,880 rpm, Bdedpfou R S A Dex Aproc Sound pressure level: 65 dB, Dimensions (LxWxH): 1,200 x 900 x 1,250 mm, Weight: 201 kg - new exhibition machine -

Condition: excellent (used), Compressor SCHNEIDER UNM STS 660-10-270 XDK – used – Tank with powder coating, including refrigerant dryer ----- Technical data ----- Tank capacity: 270 litres, Number of cylinders: 1, Maximum flow rate: 660 litres, Effective delivery: 520 litres, Maximum pressure: 10 bar, Motor: 4 kW, Speed: 2,895 rpm, Dimensions (LxWxH): 900x800x1850 mm Bdedpfx Apeyyzrbersc Quality information: - thorough basic cleaning performed - electrics tested - immediately ready for operation

Condition: used, Screw Compressor SCHNEIDER AM B7.5 10 – used – ----- Technical Specifications ----- Max. pressure: 10 bar Motor: 7.5 kW Bedpfx Asy Dp Swsprsdc Air delivery at 10 bar: 1,000 l/min Weight: 250 kg Operating hours: 6,922 h Load hours: 2,083 h Year of manufacture: 2017

Condition: excellent (used), lifting height: 22,000 mm, Year of construction: 2016, operating hours: 1,450 h, Drivetrain Make of engine: Yanmar Weights Empty weight: 4.600 kg Bsdoy U Imnjpfx Aprodc Functional Lifting capacity: 3.990 kg Dimensions of cargo space: 410 x 80 x 193 cm CE mark: yes Condition Technical condition: very good Visual appearance: very good Other information Delivery terms: EXW Production country: NL Additional information Please contact Vink Machinery for more information = Additional options and accessories = - Hook blocks = Remarks = Hoeflon C10 * 2016 * Diesel and 380 Volt drive * 1,450 operating hours * Fly jib * 4,000 kg winch * Non-marking tracks * Remote control * 22 meter hook height * 19.8 meter horizontal reach * Unlimited swing rotation * 3,990 kg lifting capacity * 4,600 kg own weight * Recently had a full service and major overhaul at Hoeflon * Equipped with a new slewing ring * Includes maintenance history

Condition: used, empty load weight: 3,180 kg, maximum load weight: 6,820 kg, overall weight: 10,000 kg, axle configuration: 2 axles, first registration: 08/2011, loading space length: 5,070 mm, loading space width: 2,420 mm, suspension: steel, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, 3-sided tipper, 500 mm drop sides, 4 x 3 t lashing eyes, loading height approx. 950 mm, , Surcharge for aluminum ramps, Price: 600 Euro, , Vehicle is sold on behalf of the customer , , -- Misprints, errors and modifications excepted, sample pictures --, More data under: !, More Details: ! Bjdpfxjy Uan Dj Apredc

Condition: refurbished (used), Year of construction: 1998, functionality: fully functional, grinding width: 1,100 mm, power: 11 kW (14.96 HP), height adjustment type: electric, Refurbished automatic wide belt sander suitable for calibration of solid wood and sanding of veneered components. The SANDYA 10 model belongs to the higher range of SCM automatic wide belt sanders, characterized by an exceptionally rigid frame, top-quality sanding performance, and versatile applications. 2 units: roller + roller with platen and shared 11 kW motor Bdsdpjwx I Tpjfx Aprsc 1. Calibration roller - steel 2. Sanding roller - soft rubber + pneumatic sanding platen Sanding width: 1100 mm 2 feed belt speeds Automatic thickness measurement Motorized thickness adjustment with display + fine-tuning Table extensions at infeed and outfeed Pneumatic oscillation Very good technical condition, completely refurbished Czech manual available CE safety standard Suitable for calibration and sanding of solid wood and veneer EXCELLENT TECHNICAL CONDITION The machine is refurbished, set up, and tested.

Condition: used, Year of construction: 2004, operating hours: 208 h, machine/vehicle number: ME102080, Weights Bdjdpfx Aey Uq Hwsprjc Empty weight: 2.575 kg Functional Mast: articulated arm Lifting capacity: 230 kg Working height: 1.000 cm Dimensions of cargo space: 270 x 99 x 199 cm Other information Front tyres / undercarriage remaining: 60 Rear tyres remaining : 60 Tyre brand: - Max. horizontal reach: 300 m Additional information Please contact PFEIFER GROUP for more information

Condition: excellent (used), Year of construction: 2016, ABB IRB4400L-10+IRC5 controller+TPU-Low DTC Bdedpfx Aoxq Tt Neprjc DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: good (used), Year of construction: 1978, scissors lift table make.TREPEL type:S100/6 year 1978 Bdedpfx Asfluupoprjc Load capacity: 10 000Kg. Working pressure : 220 Bar Panel size : LXB 2500mmX1250mm Height min: 670mm Max height : 1230mm Operation via foot pedal .

Year of construction: 1990, condition: good (used), Various collets and holders Approx.300 pieces. For DECKEL milling machines FP1 -FP2-FP3-FP4 Bdodpfxohvz Iie Aproc Single sale demand inquiries.

Condition: refurbished (used), Year of construction: 1985, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 1,500 rpm, spindle speed (min.): 5 rpm, feed length X-axis: 1,200 mm, feed length Y-axis: 2,000 mm, feed length Z-axis: 700 mm, feed rate X-axis: 1,000 m/min, feed rate Y-axis: 1,000 m/min, feed rate Z-axis: 1,000 m/min, total width: 4,000 mm, San Rocco Horizontal Boring Machine Fully overhauled San Rocco horizontal boring machine, originating from a high-end aerospace manufacturing facility. The machine is equipped with a Siemens SINUMERIK 840D CNC control system with SIMODRIVE 611 drive technology. The machine is fitted with modern digital drive systems and is designed for high-precision multi-axis machining in continuous operation. It was fully overhauled in 2024, including brand-new telescopic covers on all axes, as well as numerous additional essential refurbishments to the hydraulic system, CNC components, hoses, seals, and related assemblies. Travels X-axis (longitudinal): 1,200 mm Y-axis (cross): 2,000 mm Z-axis (vertical / spindle axis): 700 mm Spindle Data Boring spindle diameter: 100 mm Tool interface: ISO 50 Milling spindle diameter: 185 mm Spindle axial travel: 700 mm Feeds and Rapid Traverses Automatic feeds (spindle and vertical axis): 2 × 1,000 mm/min Rapid traverse (spindle and vertical axis): 5,500 mm/min Distances Minimum spindle height above table: 0 mm Maximum spindle height above table: 1,500 mm Maximum distance from spindle nose to table center: 1,850 mm Spindle Speeds Torque range: 5 to 14 rpm Continuous power range: 15 to 1,450 rpm Number of gearbox ranges: 4 Speed ranges: 6–51 / 49–160 / 140–460 / 440–1,450 rpm Table Data Rotary table size: 1,100 × 1,300 mm Longitudinal travel: 1,200 mm Cross travel: 2,000 mm Table Feeds Automatic feeds X and Y: 1,000 mm/min Rapid traverse X and Y: 5,500 mm/min Table Rotation Continuous rotation: 30 to 100 degrees per minute Rapid rotation: 5,000 degrees per minute Drive System Siemens SIMODRIVE 611 E/R module 36/47 kW LT modules 108 A and 2 × 25 A Lifting and Transport Data Group 1 Steel bar Ø 70 mm, length 1,600 mm Bedpfx Asx Rhlcoprodc Steel bar Ø 70 mm, length 2,400 mm Four spacer rings for lifting slings Four steel slings Ø 22 mm Weight approx. 12,500 kg Group 2 Two steel slings, minimum Ø 18 mm Weight approx. 3,500 kg Group 3 Manual lifting Weight approx. 1,300 kg Condition The machine is in very good technical condition and can be inspected and tested under power by appointment.

Condition: used, Year of construction: 2023, 1 unit of AVOLA ZBV400-10 construction circular saw Color: as shown in the pictures, according to the images and inspection Year of manufacture: 2023 Dimensions L/W/H: 120x80x100cm Condition: used Bjdpfxsy Tim To Aprjdc