Used Cytiva Sweden Ab Akta Ready Chromatography System for sale (45,416)

Condition: used, Year of construction: 2024, clear span: 2,700 mm, Racking system for sale Frame P90 6500x1100x90 – 356 pcs (60 EUR/pc) Beams 2700x100 (2400kg) – 1248 pcs (8 EUR/pc) Beams 3600x125 (2600kg) – 1820 pcs (12 EUR/pc) Ljdsu H Uzbepfx Akfjhf Frame Jungheinrich Esmena 6500x1100x85 – 116 pcs (55 EUR/pc) Beams 2700x115 (3000kg) – 674 pcs (9 EUR/pc) Beams 3600x115 (2400kg) – 576 pcs (12 EUR/pc) Frame NEDCON 6500x1100 – 30 pcs (60 EUR/pc) Beams 2700x110 (3000kg) – 1152 pcs (9 EUR/pc) Beams 3600x130 (2800kg) – 480 pcs (12 EUR/pc)

Condition: new, Year of construction: 2026, Butterfly Table BS20 Randek butterfly table BS20 is an efficient tool when producing prefabricated walls, roofs, floors, gable ends in timber or steel frame. The tables can be used separate or placed in a line. High quality is achieved due to the clamping function that guarantees the squaring of the building component. The turning of the building element is done with a controlled automatic process. High productivity is achieved; the working table is optimized for prefabricated house production. Functional description: The following processes can be done in the working table / butterfly table: • Automatic turning of building component, the up raiser table raises and flips over the building component during a controlled process to the receiver table, and the building component is turned. • Squaring of building component, the pneumatically clamping function on the long side of the table presses the building component into a squared high quality building component. • The table is developed in order to efficiently perform the following processes: building of framework, put on and nail sheets, nailing of plastic of paper foil and insulation of building component. Technical description: • Length: Available in lengths of 6000, 7500, 9000 and 12000 mm • Width adjustment between 2250 – 3100 mm, the adjustment between different widths is easily done with a manual control • The tables are hydraulically appraisable up to 91 degrees • Pneumatically squaring function on the up raiser table on the long side, stoppers height 160 mm • The tables are covered with plywood sheets as far as technically possible, the sheets makes it possible to put on sub components and beams easily directly on the table • The tables are built in strong steel profiles • The working height of the tables is optimal 620 mm • Equipped with alongside c-profiles for possible placement of steer stoppers for beam placement • The tables are completely delivered ready for assembly with very simple installation process. The customer is responsible for supply of motor cover and switcher for hydraulic unit (3kW) • The tables are designed to make it possible to add a multi function working bridge with nailing or drilling function Ledpfx Ako Nn Hyofehf • The distance between the tables shall be approximately 1100 mm, depending on the thickness of the building component Security: • The machine is equipped with safety stop CE-marked Benefits: • Squared building components due to clamping function • Controlled and automatic turning of the building component • Ideal working height • Flexible adjustment in width

Condition: new, Randek intersection saw SPL728 Computer controlled, revolving, with LAN (Ethernet) connection for downloading or storing sawjobs (text file in ASCII format). The number of programs that could be stored is limited only by the size of the hard disk. Through the graphical touch screen (HMI), the operator is able to track all details directly on the screen or direct the saw directly to minimize disruptions in the production run. Sawblade: Heart metal, low noise, 700 mm Ø / 116 teeth, 360 ° horizontal swivel, 90 ° -28º inclined, 250 mm entry depth Engine performance 7.5 kW. Automatic closed-lock plastic protective screen. Supply bank, selectively 4.0 / 5.8 / 8.2 / 10.6 m long Driving role, IRO4-120, driven. Transport roll 76 mm Ø, roll length 400 mm, roll spacing C / C 500 mm. Return value 120 mm. Lhodpfx Ajfg Tatekfef Pressing device, pneumatic, 2 piece Select direction from left or right. Delivery bank, optionally 5.8 / 7.0 / 8.2 / 9.4 / 10.6 / 11.8 / 13 m long Computer controlled rolling stock type LX. Execution guide, rollers 76 mm Ø, length 400 mm. Hinged hooks 120 mm. 2 computer-controlled longitudinal locks, driven by gear belts. Hump ​​1 - designed for cutting lengths up to 50 mm. Note 2 - runs over the entire length of the carrier bank. The positioning of the longitudinal abutment and the setting of the cut angle requires independent computer control. Maximum speed of longitudinal contact 1 m / s. Wooden furniture: 1 piece Return devices: 2 pieces Direction: select from left or right

Condition: new, Year of construction: 2026, functionality: fully functional, BS10U 80° 1-table solution is used when producing open panels, curtain walls or other open component (floor, roof). Available in lengths: 6000 mm, 7500 mm, 9000 mm, 12 000 mm. Can be equipped with a number of options: Hole beams, adding flexibility in production of building elements less than 2250 mm in height or when producing angled shaped walls etc. Lodpfxex Tdtnj Akfjhf Hydraulic squaring instead of the standard solution Pneumatic squaring. Extended width adjustment in production of elements higher than 3100 mm (< 3650 mm). Rollers for transport elements in horizontal position enables production lines with BS20 system.

Condition: good (used), Item: D-1036-Bulk feeder. ABK Sweden Type: STR 301 Stainless Steel bulk feeder with close vat at bottom. Discharge height: 2700 mm Dimension: L 3500 x H 2700 x W 1500 mm Vat: W 1500 x L 1450 x H 1350 Lhjdpfx Akon Nxprofsf Vat inside: W 900 x L1050 x H700 Flight height: 100 mm Belt width: 300 mm

Condition: excellent (used), System 3R 3R-901-20E compatible 3Refix mandrel Ø20mm System 3R 3R-901-20E compatible 3Refix mandrel Ø20mm, rust-resistant - 3Refix compatible Ø20 mm - Rust-resistant Lhodpfew E Hgbox Akfof - Recommended tightening torque 4 Nm - Supplied singly Partly new and unused

Year of construction: 1995, condition: ready for operation (used), For sell we have whole line. System TM Bison loading machine Lhodpfxjtqdfie Akfsf Weinig Hydromat H 22 B year 1989 System TM Angus unloading 450 - 2500mm lenght 20 - 80 mm height 45 - 160 mm width

Condition: as good as new (ex-display), Year of construction: 2015, Ultrasonic Cleaning System It is designed for 10m long heat exchanger with 1.5m diameter and weight of 30 tons. Together with internal mounted rollers and quick chemistry heating system, it is perfect for cooperation with demanding clients. Lhedpfx Ajuigpmokfof Applications for the use of ultrasonic units - Industrial cleaning - High-pressure cleaning - Petro-chemical activities - Shut-down cleaning activities - Other cleaning where Year of production: end of 2015 Total working hours: 135 for diesel generator, about 40 for ultrasonic transducers From the beginning It was stored in warehouse in perfect conditions All other technical information and price can be sent upon request. This technology is highly recommended for cleaning heat exchangers but also for small parts which high pressure methods can damage. It reduces the periods of shutdowns while cleaning, saves water and sewage.

Condition: reconditioned (used), Year of construction: 2015, operating hours: 28,748 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 570 kg, overall weight: 20,000 kg, oil tank capacity: 600 l, power: 37 kW (50.31 HP), volume flow: 350 m³/h, Technical data baler: Manufacturer Presona AB, Sweden Type LP 60 VH1 Year of construction 2015 Total operating hours, 30,143 hours, as of July 2025 Effective pump running time onl 6,527 hours, as of July 2025 Number of pressed bales 115,193 bales, as of July 2025 Press force pre press 25 t Main press force 60 tonnes Specific pressing force 73N/cm² Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Theoretical throughput capacity 800 m³/hour Throughput capacity under operating conditions 350 m³/hour Bale dimensions 1,100 x 750 mm Drive power 37 kW Tying 5-fold vertical, fully automatic Throughput capacity with a Bulk weight of 50 kg/cbm 11 to 14 tonnes/hour Bale weights 420 to 570 kg, depending on material Hydraulic oil tank volume 600 litres Baler dimensions assembled with hopper 10,100 x 3,750 x 4,310 mm (l x w x h) Transport dimensions excluding press 10,100 x 2,400 x 3,000 mm (l x w x h) Machine weight press approx. 20 tonnes Condition of the press: The press was partially overhauled in our workshop and then tested in manual and automatic mode. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Grease cartridges of the automatic roller lubrication system replaced Slide rails cut out from the press floor in the press room Underbody reinforced with welded sheets New HARDOX slide rails welded in Lhsdpfxovn Tg Ij Akfjf Wire station with deflection rollers for the lower wire cleaned and made operational Slide rails cut out from the floor in the press channel New HARDOX slide rails welded in Both side walls of the press channel dismantled, derusted Worn side wall plates cut out Complete side walls covered with new wear plates and welded Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Machine checked, general maintenance work carried out and press tested in manual and automatic mode Comments: The press is sold without a conveyor belt and without wire stations. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 78 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material Lodjvwlqqspfx Akfshf 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,100 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 550 kg, overall weight: 16,000 kg, oil tank capacity: 600 l, year of last overhaul: 2024, Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Year of construction 2005 Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of April Pressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Bale chamber volume 2.2 m³ Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Tying 5-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press approx. 16 tonnes Condition of the baler: The machine was partial overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. The following overhaul work was carried out: General work: Machine cleaned, derusted, primed, partially painted Wire entry marks in the press channel feed-throughs welded shut and smoothed Hydraulic unit: Hydraulic oil tank emptied, tank cleaned, new oil filled Oil filter and air filter replaced Leaky oil sight glass on hydraulic oil tank replaced All hydraulic hoses replaced Electrics: English language installed in the programme menu Two key switches in the control panel replaced Control cabinet replaced Signal lamp on the control cabinet replaced Flaps end switch replaced Electrical system of the turbulator replaced, connected and tested Press ram: All four rollers removed from the press ram and replaced Main hydraulic cylinder dismantled, disassembled and partially overhauled, cylinder tube honed, complete seal set replaced, leak test performed All plastic wear pads on the press ram replaced Lodpfxsu Thhrs Akfshf Pre-press: Both bearings on the pre-press shaft replaced. Both hydraulic cylinders dismantled, disassembled and partially overhauled, both cylinder tubes honed, complete seal sets replaced, leak test performed. Scraper flap on the pre-press replaced. Binding system: Two complete needles with wire deflection rollers replaced Needles adjusted and set All wire deflection rollers in the needle heads replaced Drill fingers replaced Two drill shafts replaced All 8 wear plates on the Drillomat, under the drill fingers, replaced Scope of delivery: Only the baler will be sold. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 2007, condition: good (used), functionality: fully functional, Paint drying chamber MEYER AB / Fanmet OY 17m3 Year of construction 2007 )2009 installed ) Manufacturer MEYER OY Finland was used for drying lacquered furniture parts. Feeding with tray trolleys Lodjtt Sy Rjpfx Akfehf Length 3600mm width 2150mm height 2200mm approx. 17m3 electric heating total power 30 kw 18 heating units, each with 1667W, 400 V (length 2360mm) Air flow: 3m3 /sec or 10,000m3 /hour Inner cladding galvanized sheet steel 2 VEM fan motors ( 3,6kW+0,37kW ) ATEX Thermostat 0-120C Overheating protection 0-210C ATEX compliant 94/9/EC CE marked

Condition: used, Year of construction: 1962, functionality: fully functional, Adolf John Hanau AB II Timber saw Wood saw Trimming saw center height 105mm, column throat 650mm, 160mm width, conveyor belt 5-45m/min From first owner ! Weight with conveyor approx. 1250Kg Connection to 400A 32A Used, functional condition Lhedpouprqwefx Akfjf

Condition: used, Used stainless steel container / transport container / IBC Last use: Solvent Item number: 10848 Volume: 800 liters Type: Vertical in galvanized stacking frame Material (wetted parts): 1.4301 / AISI304 Manhole 400mm Design: Single-walled Operating pressure according to type plate: 0.10 bar Empty weight: 213 kg Ljdpfx Aou Ngqtokfohf Tank dimensions: Total width: 1020mm Total length: 1220mm Total height: 1400mm Height of the feet: 100mm Materials: Interior: 1.4301 / AISI 304 External parts: Galvanized steel Equipment: Type plate: yes Outlet diameter: 40mm Outlet valve: ball valve Distance drain to floor: 265mm

Condition: used, Hydraulic horizontal clamp Lhjdpfx Aextqg Eokfjf

Condition: used, mileage: 73,200 km, power: 110 kW (149.56 HP), first registration: 06/2009, overall weight: 8,500 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, gearing type: mechanical, emission class: euro4, total width: 2,150 mm, Equipment: ABS, air conditioning, all wheel drive, * Jotha telescopic tipper as a swap system, year of manufacture 2012 * CombiCon 4015 U turns your Unimog U 20 into a multifunctional all-year-round vehicle. * As a quick-change system, the body can be assembled or disassembled in a short time. * With a lifting capacity of 4000 kg, you can use the entire payload range of your Unimog * Width between the lifting arms is over 1700 mm. * For containers with 2.5 m² or 3.5 m² * PTO drive with PTO at the front * Trailer coupling * Trailer brake system * Trailer load of 18t with turntable trailer * A trailer load of 13t with a central axle trailer with a 1000 kg support load is possible Lhsdjry Ncwepfx Akfjf * Front mounting plate size 3 * Differential locks * Disc brakes * Rotating beacons * Coil springs * Secondary transmission with working group * Dual-circuit hydraulics * Electric. Windows and mirrors * Radio and hands-free telephone * Rear view camera * Telligent gearshift * Passenger seat as a two-seater * Air-sprung driver's seat * Maximum container length 2,400mmMaximum container width 1,700mmMaximum lifting capacity 4,500kg * and much more * !!! Errors, changes and prior sale reserved!!!

Condition: used, mileage: 73,400 km, power: 110 kW (149.56 HP), first registration: 06/2009, overall weight: 8,500 kg, fuel type: diesel, color: orange, gearing type: mechanical, emission class: euro4, loading space width: 2,150 mm, number of seats: 3, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), ?Jotha telescopic tipper as a change system, year of manufacture 2012 ?CombiCon 4015 U turns your Unimog U 20 into a multifunctional all-year-round vehicle. ?As a quick-change system, the body can be assembled or dismantled in a short time. ?With a lifting capacity of 4000 kg, you can use the entire payload range of your Unimog ?The width between the lifting arms is over 1700 mm. ?for containers with 2.5 sqm or 3.5 sqm ?PTO drive with PTO at the front ?Trailer coupling ?Trailer brake system ?Trailer load of 18t with turntable trailer ?A trailer load of 13t with central axle trailer with 1000kg support load possible ?Front mounting plate size 3 ?Differential locks ?Disc brakes ?Beacon lights ?Coil springs Lhedpfxot Exy Ro Akfsf ?Rear-mounted gearbox with working group ?Dual-circuit hydraulics ?Electric windows and mirrors ?Radio and hands-free telephone system ?Rear view camera ?Telligent gearshift ?Passenger seat as a two-seater ?Air-suspended driver's seat Maximum container length 2,400mm Maximum container width 1,700mm Maximum lifting capacity 4,500kg ?and much more !!! Errors, changes and prior sale reserved !!!

Condition: used, mileage: 73,200 km, power: 110 kW (149.56 HP), first registration: 06/2009, overall weight: 8,500 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, gearing type: mechanical, emission class: euro4, loading space width: 2,050 mm, loading space length: 2,200 mm, loading space height: 400 mm, total width: 2,150 mm, Equipment: ABS, air conditioning, all wheel drive, * Jotha telescopic tipper as a swap system, year of manufacture 2012 Ljdjng Arpjpfx Akfehf * Tipping bridge with tipping ram 2200 x 2050 x 400 as a swap system * CombiCon 4015 U turns your Unimog U 20 into a multifunctional all-year-round vehicle. * As a quick-change system, the body can be assembled or disassembled in a short time. * With a lifting capacity of 4000 kg, you can use the entire payload range of your Unimog * Width between the lifting arms is over 1700 mm. * for containers with 2.5 sqm or 3.5 sqm * PTO drive with PTO at the front * Trailer coupling * Trailer brake system * Trailer load of 18t with turntable trailer * A trailer load of 13t with a central axle trailer with a 1000kg support load is possible * Front mounting plate size 3 * Differential locks * Disc brakes * Rotating beacons * Coil springs * Secondary gear with working group * Dual-circuit hydraulics * Electric windows and mirrors * Radio and hands-free telephone system * Rear view camera * Telligent gearshift * Passenger seat as a two-seater * Air-sprung driver's seat * And much more * !!! Errors, changes and prior sale reserved !!!

Condition: used, mileage: 73,400 km, power: 110 kW (149.56 HP), first registration: 06/2009, overall weight: 8,500 kg, fuel type: diesel, color: orange, gearing type: mechanical, emission class: euro4, loading space width: 2,050 mm, loading space length: 2,200 mm, loading space height: 400 mm, number of seats: 3, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), ?Jotha telescopic skip loader as a change system, year of manufacture 2012 ?CombiCon 4015 U turns your Unimog U 20 into a multifunctional all-year-round vehicle. ?As a quick-change system, the body can be assembled or dismantled in a short time. ?With a lifting capacity of 4000 kg, you can use the entire payload range of your Unimog ?The width between the lifting arms is over 1700 mm. ?for containers with 2.5 sqm or 3.5 sqm ?PTO drive with PTO at the front ?Trailer coupling ?Trailer brake system ?Trailer load of 18t with turntable trailer ?A trailer load of 13t with central axle trailer with 1000kg support load possible ?Front mounting plate size 3 ?Differential locks ?Disc brakes ?Beacon lights ?Coil springs ?Rear-mounted gearbox with working group ?Dual-circuit hydraulics Ledpfx Aotx Hqxokfohf ?Electric windows and mirrors ?Radio and hands-free telephone system ?Rear view camera ?Telligent gearshift ?Passenger seat as a two-seater ?Air-suspended driver's seat Maximum container length 2,400mm Maximum container width 1,700mm Maximum lifting capacity 4,500kg ?and much more !!! Errors, changes and prior sale reserved !!!

Condition: used, mileage: 73,200 km, power: 110 kW (149.56 HP), first registration: 06/2009, overall weight: 8,500 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, gearing type: mechanical, emission class: euro4, total width: 2,150 mm, Equipment: ABS, air conditioning, all wheel drive, * Jotha telescopic tipper as a swap system, year of manufacture 2012 * CombiCon 4015 U turns your Unimog U 20 into a multifunctional all-year-round vehicle. * As a quick-change system, the body can be assembled or disassembled in a short time. * With a lifting capacity of 4000 kg, you can use the entire payload range of your Unimog * Width between the lifting arms is over 1700 mm. * For containers with 2.5 m² or 3.5 m² * PTO drive with PTO at the front * Trailer coupling * Trailer brake system * Trailer load of 18t with turntable trailer * A trailer load of 13t with a central axle trailer with a 1000 kg support load is possible * Front mounting plate size 3 * Differential locks * Disc brakes * Rotating beacons * Coil springs * Secondary transmission with working group * Dual-circuit hydraulics * Electric. Windows and mirrors * Radio and hands-free telephone * Rear view camera * Telligent gearshift * Passenger seat as a two-seater Ljdpfxor I Sp Dj Akfehf * Air-sprung driver's seat * Maximum container length 2,400mm * Maximum container width 1,700mm * Maximum lifting capacity 4,500kg * and much more * !!! Errors, changes and prior sale reserved !!!

Condition: used, Year of construction: 2003, feeder rollers, transfer belts for 6 meters, retractable forks, lift tables with rubber-coated parcel drive chains, outfeed chains Lodpfxeycxtyo Akfehf

Condition: like new (used), Year of construction: 2015, operating hours: 6 h, functionality: fully functional, machine/vehicle number: 17284006, total width: 1,000 mm, total length: 2,800 mm, total height: 1,580 mm, overall weight: 125 kg, input voltage: 230 V, air demand: 12 m³/h, air pressure: 7 bar, power: 0.5 kW (0.68 HP), input frequency: 50 Hz, Equipment: documentation/manual, A semi-automatic tube filling machine MF10A manufactured by Medipac AB. The filling capacity is approximately 24 tubes/minute. When the magazine for filled tubes is full (approx. 10 tubes), the machine switches to standby mode, and when the filled tubes are removed from the magazine, the machine automatically resumes operation. This allows for easy operation by a single operator. The machine is equipped for ø25mm tablets and tubes with ø29mm outer diameter; other formats available upon request. Documentation (in English) is available. Lsdpfexqf Rmex Akfjhf

Condition: used, axle configuration: 3 axles, first registration: 08/2018, color: other, Year of construction: 2018, Empty weight: 6.939 kg The 2018 System Trailer 3 Axle SAF Disc Curtainsider features a galvanized chassis and anti-theft tilt, priced at €11,950 without VAT. It showcases good tire conditions across all axles, enhancing its appeal for heavy-duty transportation needs. The trailer is designed for optimal security and durability, making it a reliable choice for logistics operations. Tire profile dept: Axle 1: left 13 mm right 5 mm Axle 2: left 7 mm right 6 mm Axle 3: left 7 mm right 6 mm Ledpfx Akov Ica Defohf

Condition: good (used), Year of construction: 2001, Quickwood Rustication / Brushing Line on 03 sides with 02 brushes per side Lhjdpfx Aevy Eu Ijkfsf

Condition: like new (used), Year of construction: 2020, functionality: fully functional, overall weight: 500 kg, total length: 1,200 mm, total width: 800 mm, total height: 1,500 mm, year of last overhaul: 2025, For sale is a pallet magazine / pallet dispenser SOCO SYSTEM PALMANAGER in very good and well-maintained condition. This machine is used for the automatic loading, stacking, and dispensing of empty pallets, making it ideal for warehouses, logistics centers, and production companies with a continuous pallet demand. The PalManager ensures ergonomic, safe, and time-saving pallet handling and can be easily integrated into existing conveyor and packaging lines. Technical data: Manufacturer: SOCO SYSTEM A/S Model: PALMANAGER Machine no.: 20-182-PALM Year of manufacture: 2020 (week 39/2020) Pallet capacity & dimensions: - Capacity: up to 14 empty pallets - Max. total weight: 500 kg - Pallet type: Euro pallet (EPAL) - Pallet size (L × W × H): 1200 × 800 × 150 mm Electrical & pneumatic data: - Voltage: 1 × 230 V - Frequency: 50 Hz - Rated current: 0.2 A - Max. short-circuit current: 10 kA - Compressed air: min. 0.6 – max. 1.0 MPa - Air consumption: approx. 28.8 Nl / cycle Features & equipment: - Robust industrial construction - Enclosed safety housing - Compact, space-saving design - Integrated control panel - Automatic pallet separation - Reduces manual handling and downtime - Ideal for automated logistics and packaging lines Condition: Lhodsx H Iigspfx Akfef - Used - Very good, well-maintained condition - Fully functional Scope of delivery: - SOCO SYSTEM PALMANAGER pallet magazine - Delivery without pallets - Documentation by arrangement Inspection & collection: - Inspection by prior appointment possible - Collection from location in Norderstedt - Loading / transport by arrangement Original price: €25,000