Used Dugard Dugard Eagle 200 for sale (16,048)

Condition: excellent (used), We offer a climate test chamber for sale. Air-cooled Test chamber nominal volume: 280 liters Dimensions: External dimensions of the test chamber: 1500 x 2040 x 1075 mm With fan motor and door removed: 1500 x 1940 x 925 mm Test chamber: 720 x 690 x 560 mm Door, clear opening: 720 x 690 mm Viewing window, heated: 500 x 600 mm Temperature range: Hodpfezd R T Tox Abhop +5 to +100 °C Heating rate: 4.0 K/min Cooling rate: 0.6 K/min Climate range: +10 to +95 °C Humidity range: 10 to 95 % RH Humidity change rate: ≤ ± 3.0 Water connection for humidifier: Tap water or distilled water, 20-liter reservoir Power connection: 400 V 3/N/PE, AC, 50 Hz Maximum power consumption: 6.3 kW Weight: 500 kg Type: 3416/16 Refrigerant: R134a For your peace of mind as a buyer, please note the following: The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated instruments. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), Here we offer a Heraeus Vöstch dryer for coating materials. Maximum concentration of flammable substances: < 40% of the lower explosive limit (LEL). Maximum temperature of the heating surface: over 750 °C. Device description: Technical data: Internal volume (usable volume): 0.216 m3 Hodpfx Aozd Rrcjbhep Internal dimensions: width 600 mm, height 600 mm, depth 600 mm External dimensions: overall width 796 mm, height 1725 mm, depth 850 mm Load capacity: Total roller track capacity: 55 kg Loading height above the installation floor: 820 mm Weight (net): 275 kg Minimum exhaust air flow rate: 96 m3/h Purge time (5 air changes): 90 sec. Enhanced recirculating air flow rate: 33 m3/h Total steam space: 0.414 m3 Sound pressure level (according to DIN 45635): < 70 dB(A) Cut-out temperature: Temperature limiter (TB) fixed at 300 °C Temperature selector limiter (TWB) adjustable above the nominal temperature by 20 Temperature safety class (according to EN 60519-2) Temperature limiter (TB): 1 Temperature selector limiter (TWB): 2 Nominal temperature: 200 °C Electrical data: Rated voltage / frequency: 400V, 3/(N)PE, AC 50/60Hz Rated current: 12.0 A, rated power: 6.0 kW, connected load: 7.0 kW Weight: 275 kg Type: LTU 60/60 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We are happy to answer any further questions you may have by phone.

Condition: used, Year of construction: 2008, functionality: fully functional, 1. OPS INGERSOLL Gantry Eagle 800 wire EDM machine with IMC5 handling system, manufactured in 2008. In very good condition and in operation until December 2025. Now dismantled. Includes 1 cooling unit M.T.A TAE EVO M10 (manufactured in 2012). 1 fire extinguishing system Kraft & Bauer FB703. Weight approx. 6,700 kg. Hedpfx Aoy Ifu Njbhep Available for sale at a favorable price. Price significantly reduced!!!!

Condition: used, Year of construction: 2021, input frequency: 50 Hz, input current: 21 A, We are offering this used HOMAG DRILLTEQ V-200 through-feed drilling machine, manufactured in 2021. The machine has been regularly serviced by HOMAG. The package includes a KOGI dust extraction unit (2.2 kW / 1,650 Pa), two collection bags, and various tools. Specifications Vertical drilling block with 13 spindles Hedpfsy Extmex Abhop Horizontal drilling block with 4 spindles on the X-axis Horizontal drilling block with 2 spindles on the Y-axis Grooving saw, Ø100 mm Correctness control system 10 kW tool-changing spindle Maximum workpiece length: 200–3,050 mm Workpiece width: 70–850 mm Workpiece thickness: 8–56 mm PowerTouch display WoodWOP software included Machine Data Type: DRILLTEQ V-200 OPTIMAT BHX050 Serial number: 0-250-73-6562 Year of manufacture: 2021 Power supply: 400Y/230 V Number of phases: 3 Frequency: 50 Hz Rated current at full load: 21 A Fuse rating: 25 A Control voltage: 24 V The package also includes a KOGI dust extraction unit with a 2.2 kW motor and 1,650 Pa suction pressure, equipped with two collection bags, as well as various tooling. Should you have any questions or require additional information, please do not hesitate to contact us by email or telephone.

Condition: reconditioned (used), No. 01 BIGNOZZI 3-cylinder hydraulic press Capacity: 200 tons Completely refurbished Platen size: 1550 x 1050 mm Hedpfshnc R Ijx Abhep Daylight: 1000 mm Stroke: 500 mm Platen height: 1180 mm Dimensions: 2900 x 1700 x 2900 (h) Weight: 10 tons

Condition: excellent (used), functionality: fully functional, working width: 2,060 mm, sheet thickness (max.): 3 mm, back gauge adjustment: motor-driven, Equipment: emergency stop, safety light barrier, Vimercati mechanical guillotine shear. - Cutting width: 2060 mm - Sheet hold-down cylinders: 11 units - Maximum cutting thickness for steel with Rm 410 MPa: 3 mm - Maximum cutting thickness for steel with Rm 600 MPa: 2 mm - Pneumatic rear sheet support Hodjxdr R Tspfx Abhjp Machine is currently in operation and fully functional. Equipped with motorized back gauge with manual control and display showing cutting dimensions. Machine comes complete with added safety guards and an operation and maintenance manual.

Condition: excellent (used), Year of construction: 2007, Synchronized hydraulic press brake MECOS Mod. Syncro 200/4000. Numerco ESA KVARA control. NR.07 Controlled axes (Y1-Y2-X-R-Z1-Z1-Z1) WILA automatic compensation table. Pneumatic tool attachment: Type Promecam, Tecnostamp H=150 mm. Useful bending length: mm 4050. Power exerted: Ton 200. Hodpfxsv S Ad Re Abhop Front safety devices: DSP LASER. Weight: kg 24,000.

Year of construction: 2009, condition: ready for operation (used), Throughput: approx. 150 jars/min, foreign body detection capability for glass fragments: from approx. 3 x 3 x 3mm, metal: from approx. 1 x 1 x 1mm, stones and bones: from approx. 3 x 3 x 3mm, suitable for glass containers, tinplate cans, beverage cartons (carton bricks), and plastic containers, typical false rejection rate per 10,000 inspected products: approx. 7, maximum container diameter: 155mm, maximum inspection speed: 100m/min, standard sensor speed: 45m/min, sensor height: 256 to 410mm, pixel size: 0.4 x 0.4 to 0.8 x 0.8mm, rejection system: electropneumatic cylinder, operator interface: 17 inch touchscreen, remote access: Ethernet or modem, frame material: AISI 304 stainless steel, sensor protection class: IP55, power supply: 3 phase + protective earth (3PH + GND), operating voltage: 400V, machine power consumption (2 motors): 3kW, processing unit power consumption: 500W, high voltage generator: 0.3 to 1kW, electrical cabinet protection class: IP55, X-ray radiation: 0.1µSv/h, compressed air operating pressure: 4 to 6bar, air consumption: 50Nl/min, infeed and outfeed height: 1305mm, screen and operating height: 1070mm, length: 2890mm, width: 1000mm, height: 2525mm, weight: 1.3t. Equipped with a reject system for contaminated containers and a conveyor belt. The machine was in operation until 2024. Inspection on site is possible. Hsdpfx Aszhw S Rjbhep

Condition: good (used), Year of construction: 1997, operating hours: 38,000 h, functionality: fully functional, 1 used CNC lathe Manufacturer: Gildemeister Model: CTX 200 Control: Heidenhain Elekto Pilot 1190 Year of manufacture: 1997 Operating hours: approx. 38,000 hours Swinging diameter over bed: 440 mm Swinging diameter over slide: 210 mm Turning length: 305 mm Bar capacity: 42 mm Spindle speed: 5000 rpm Hodpfozh Ea Nox Abhjp Turret: 12 stations Tool holder: 20 VDI Machine dimensions L x W x H: 2800 x 1651 x 1771 mm Machine weight: approx. 3000 kg Accessories: Coolant system Tailstock Documentation -- Used machine, no warranty -- -- Subject to prior sale and errors --

Condition: good (used), Year of construction: 1981, Ref. -No.: 10447 Manufacturer: SKODA Type: WD 200 Year of construction: 1981 Retrofit: 2010 Type of control: CNC-Steuerung Control: SIEMENS SINUMERIK 840D Storage location: Halberstadt Country of origin: Germany X-Travel: 9000 mm Y-Travel: 4000 mm Z-Travel: 1450 mm W-Axis: 2000 mm Bed width: 2000 mm Bed height: 550 mm Spindle Diameter: 200 mm Quill Stroke: 1600 mm Rotary Table (Lxw): 4000 x 4000 mm Table Load: 80000 kg Clamping Area: 3000 x 3000 mm Turning Speeds: 257 - 2570 RPM Spindle taper: 120 Automatic feeds: 342 mm / rev Spindle Turning Speed - Stepless: 1,5 - 630 RPM Max. Torque On The Boring Spindle: 20000 Nm Rapid Traverse: 16000 m / min Drive Capacity - Spindle Motor: 9,8 - 35,5 kW Total Power Requirement: 75 kW Bore Depth: 2000 mm Vertical headstock movement on the column: 3150 mm transverse movement of the stand on the bed: 4000 mm Lowest position of the spindle axis above the bed: 1100 mm Spindle speed when moving the quill forward: 1,6 - 300 max. rpm Drill feeds (spindle, quill) continuously variable in the range: 1,6 - 1600 mm / min Milling feeds (headstock vertical, column horizontal) infinitely variable: 1,6 - 1600 mm / min Machine length: 11350 mm Machine width: 5450 mm Machine Height: 7350 mm Weight Of The Machine Ca.: 65 t Further information: Hsdpfszc Dyxsx Abhsp Threading: 22 metric threads, pitch range 0.5 - 12mm 32 Whitworth threads, pitch range 28 - 1 (gears) Accessories: - console for tools - 1 set of operating tools - ejector and fastening wedges for spindle - lubricating press - 1 set of spare parts for electrical equipment - clamping base plate - setting stick with electrical equipment Machine can be inspected under power by appointment.

Year of construction: 2008, condition: used, Universal machine for eroding and grinding various PCD tools up to 250 mm in diameter and 200 mm in length in production and service. Accessories: Full enclosure Measuring probe for complete measurement of the tools Workpiece carrier adaptation A-axis from SK 50 to HSK 63 A Loader for up to 6 eroding disk sets (tool changer) Alphanumeric keyboard Standard programs for measuring, eroding Cooling and cleaning device for dielectric Automatic fire extinguishing device Extraction N183 1 exchange element 1 flushing set 1 measuring mandrel 1 mounting flange for rotating electrodes X axis travel: 440 mm B-axis: +/- 15° Y axis travel: 876 mm Z-axis travel: 420 mm Hsdpfezdinkox Abhsp E-axis swivel range: 210° A-axis rotation range: 360° workpiece carrier base: SK 50 workpiece length max.: 200 mm Workpiece diameter max.: 250 mm workpiece weight: 15 kg Connected load approx.: 6.7 kW 400V/50 Hz Weight approx: 7000 kg Dimensions W x D x H =: 1987 x 3141 x 2275 mm colour: RAL 7047 Telegray 4/ Color RAL 7045 Telegray 1

Condition: excellent (used), Here, we offer a SUN-TEC cleanroom technology heating plate. SUN-TEC cleanroom technology heating plate Cleanroom workstation with heating plate 1600 mm x 1200 mm x 2200 mm Rated voltage: AC 200V, 3 phases, 50Hz, 30A Max. temperature: 200°C Type: Y9AT417 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) Hedpezdqbqofx Abhsp We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), CTS Temperature Shock Test Chamber Type: TSS-70/32 Manufacturer: CTS Klima Temperatur Systeme Design: Air-cooled For sale is a CTS temperature shock test chamber for temperature change and shock testing in industry, research, and development. Technical data: Test chamber volume: approx. 32 liters Max. test specimen weight: approx. 10 kg Temperature ranges: Hot chamber: +50 °C to +200 °C Cold chamber: -80 °C to +100 °C Performance data: Heating rate: approx. 6 K/min Cooling rate: approx. 6 K/min Temperature change rate: up to approx. 100 K/min Changeover time: < 10 seconds Temperature deviation: ±1 K / ±2 K Electrical data: Connection: 400 V / 3/N / 50 Hz Rated power: approx. 9.7 kW Rated current: approx. 15.4 A Fuse: 16 A slow-blow Protection class: IP 22 Refrigerant: R404A: 2.3 kg / R23: 0.90 kg Pressure data: Operating overpressure: 25 bar Test pressure: 27.5 bar Dimensions: approx. 1325 x 2012 x 1820–2020 mm (W x D x H) Weight: approx. 650 kg Further data: Sound pressure level: < 58 dB(A) Compressed air connection: 1/4" male Equipment: Two-chamber system (hot / cold chamber) Digital CTS control Display / control panel Program operation Operating hour counter Observation window Interior lighting Temperature limiter Test specimen protection RS232 interface Documentation: Declaration of conformity available Test certificates available Operating manual available Wiring diagram available Piping diagram available Quick start guide available Safety data sheets available Note: The table shown in the photos is not included in the sale. Condition: Used Optical condition see pictures Scope of supply as shown in the pictures Inspection possible by appointment. Loading can be organized. Commercial sale Hsdjy I Ntcspfx Abhep (Changes and errors in the technical data and information are reserved!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), CTS Temperature Shock Test Chamber TSS-70/350-A Device Data Manufacturer: CTS GmbH Type: TSS-70/350-A Year of Manufacture: 10/2017 Design: Temperature Shock Test Chamber Refrigeration Unit: Water-cooled Description Used temperature shock test chamber from CTS. Suitable for shock and cycle temperature tests. Application in industry, research, and quality assurance. Application Areas Material testing Aging tests Electronics and component tests Temperature shock tests Automotive and quality control Temperature Ranges Hot chamber: +50 °C to +220 °C Cold chamber: -70 °C to +100 °C Electrical Data 400 V / 3/N / 50 Hz Power: 19.8 kW Current: 46.5 A Connection: CEE 63A Refrigeration System Pre-cooling: R452A, 7.2 kg Cooling stage: R23, 2.8 kg CO₂ equivalent: 15.41 t / 41.59 t Water-cooled Pressure / Protection PS: 25 bar PT: 27.5 bar IP 54 Equipment Touchscreen control Microprocessor control Program operation Setpoint/actual value display (digital) 2-zone system Mobile frame for quick changeover Viewing window Integrated control cabinet Cooling water connections Technical Design Separate hot and cold chambers Stainless steel test chamber Industrial design Dimensions Dimensions: External dimensions (H x W x D): approx. 2450 x 2160 x 2200 mm Internal dimensions (H x W x D): approx. 610 x 850 x 680 mm Weight: approx. 2500 kg Documentation Hedpfx Aoy H Hk Aebhep Declaration of Conformity Test certificates Operating manual Wiring diagram and piping diagram Spare parts list Service before delivery (optional) Functional test Refrigerant service Leak test Test run with protocol Condition Used. Optical condition, see pictures. Scope of Delivery Test chamber TSS-70/350-A Documentation (if available) Inspection possible by arrangement. Loading and transport can be arranged on request. Subject to change and prior sale. If you have any questions, please do not hesitate to contact us.

Condition: ready for operation (used), Allmatic-NC LC 160/200 Machine Vice Hedpfx Aoyilc Sobhop Stage 1 = 15 kN Stage 2 = 30 kN Stage 3 = 45 kN Stage 4 = 60 kN Pressure sensor is not included in the scope of delivery! You are welcome to come by for an inspection. We can also organize an affordable shipping service for you! You will receive a proper invoice. A net invoice can also be issued for foreign customers, provided a valid VAT identification number is supplied. Subject to prior sale. Visit our shop and take a look at our other offers as well. All specified company names and trademarks are the property of their respective owners and are used solely for identification and product description purposes. Deviations from technical data and errors in the item description are possible and reserved.

Condition: new, Year of construction: 2026, functionality: fully functional, Equipment: CE marking, documentation/manual, The Wattsan 200W is a brand-new portable laser metal cleaning machine. Due to its air cooling system, the machine is quite small in size. It’s quiet, fast and easy to use even for a begginer. It is ideal for removing rust, paint, petrochemicals, oxide layers, welding scales, carbon deposits, etc. from metal items. This portable machine can also clean adhesive and galvanised materials as well as plaster and stone products. Thanks to pulse cleaning, this machine can clean thick layers of rust, paint, petroleum products, oxide films, scale and carbon deposits from metals without heating or damaging it. You can give our managers a call for additional details! Wattsan Cleaning 200 W machine characteristics: Cooling: Air Laser power: 200 W Machine size: 750x600x680 mm Laser source: JPT Weight: 46 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. Hedpfx Asr Hbx Tobhjp YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: used, Year of construction: 2012, Concrete mixer bucket, Bauer BK 200, manufactured in 2012, with a capacity of 2 cubic meters, and a load capacity of 2000 kg. Hedpfx Abszda A Sjhop

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, power: 112 kW (152.28 HP), Machine type: AU 200 AC-6 B Year of manufacture: 2010 Machine number: 40 003-1 Hedpfjzhlb Tjx Abhsp Condition: Very good used condition, factory overhauled approximately 1.5 years ago. 400V / 50 Hz 112 kW 199 A Suitable for industrial meat and food processing Designed for high production output.

Condition: excellent (used), CATALOG NUMBER 6650 TECHNICAL DATA - Max cutting height: 200 mm - Track width: 450 mm - Shaft width: 450 mm - Blade bore diameter: 80 mm - Shaft diameter: 60 mm - Min. blade diameter: 250 mm - Max. blade diameter: 350 mm - Max. width of cant: 870 mm - Min. length of cant: 1500 mm From above: - Pawls - Feed shaft, toothed, metal - Pawls - Feed shaft, toothed, metal - Pressure unit Hjdpfxsza Edaj Abhop - Shaft with saw blades - 2 feed shafts, metal, pneumatically pressed From below: - Guide - Metal sliding roller - Pawls - Track - Shaft with saw blades - Track - Stepless feed speed adjustment via inverter 4-40 m/min - Main motors: 2 x 75 kW - Feed motor: 3 kW - Electric vertical movement of body up/down: 0.55 kW - Electric adjustment of saw blade shafts: 2 x 0.25 kW - Central lubrication - Extraction nozzle diameter: 2 x 300 mm - Dimensions (L/W/H): 3100 x 2600 x 2000 mm - Weight: approx. 6500 kg - Centering device included - Toothed feed rollers: 3 pcs - Smooth feed rollers: 8 pcs - Motor: 2 x 1.5 kW - Pneumatic top pressure - Side pressure - Dimensions (L/W/H): 4850 x 1100 x 1800 mm - Weight: approx. 1000 kg ADVANTAGES – Czech manufacture – Double-shaft design – Centering device – DTR documentation – Year of manufacture: 2010 – Used multi-blade saw, in very good condition Net price: 262,900 PLN Net price: 62,600 EUR Net price calculated at the exchange rate of 4.2 PLN/EUR (in case of significant currency fluctuations, the price may change)

Condition: used, Year of construction: 2006, total height: 5,000 mm, total length: 7,500 mm, total width: 6,000 mm, overall weight: 45,000 kg, Machine No.: 10990003463Control SystemHeidenhain iTNC 530 (3D path control)Travel PathsX: 1,850 mmY: 2,000 mmZ: 1,100 mmB-axis: controlled universal swivel milling headC-axis: NC rotary table Ø 1,700 mm5-axis simultaneous machiningSpindleMotor spindle SK50Speed: 25–12,000 rpmPower: 44 kW (40% duty cycle) / 32 kW (100% duty cycle)Torque: 288 / 187 NmTool holder: SK50 according to DIN 69871Tool Changer60-slot tool magazineDouble gripperEquipmentIKZ 40 barChip conveyorTool measurement system Blum Laser NT HybridHeidenhain TS 640 infrared probeElectronic handwheelMinimum quantity lubrication (MQL)Oil/emulsion mist separatorCoolant through spindleCoolant tank 980 lATC (Application Tuning Cycle)Laminated safety glass windowOperating mode 4 (process observation) Travel Z-axis: 1170 - mm Travel X-axis: 2000 - mm Dimensions (LxWxH) approx.: 7500 x 6000 x 5000 mm Travel Y-axis: 1800 - mm Hodpfszhdrkox Abhsp Weight approx.: 45,000 kg Year of construction: 2,006 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: No

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, overall weight: 155 kg, volume flow: 200 m³/h, final pressure: 0 bar, type of cooling: air, warranty duration: 6 months, Factory-refurbished 1-stage SV200 vacuum pump, with a full six-month warranty (with proper operation). There are 3 pumps available and ready for sale. The pictures have taken one of the pump, but the others look the same. Upon request, we will also send a measurement report on the operation of the pump. We attached the user manuals, so you can check all neccessary informations. Hsdszfh Dxopfx Abhep

Condition: good (used), Laska KCU200 from meat free factory. Programmable model with loader for 200 litre tote bins. Hodpox Ilh Ajfx Abhjp

Condition: good (used), 10 secondhand bins available. Hedsq Ih H Eopfx Abhsp Currently 760 new bins available.

Condition: excellent (used), Year of construction: 2006, clamping force: 500 kN, screw diameter: 22 mm, clearance between the columns: 355 mm, displacement volume: 41 cm³, injection pressure: 2,800 bar, injection weight: 37 g, mold height (min.): 210 mm, overall weight: 2,700 kg, Clamping force: 50 t Year of manufacture: 2006 Hedpfxey Tvvne Abhep Injection unit .../200 Screw diameter: 22 mm Specific injection pressure: 2800 bar Injection volume: 41.8 ccm Mould clamping system 50/... Clamping force: 50 t Mould plate dimensions: 520 x 520 mm Tie bar clearance: 355 x 355 mm Mould height: 210 mm Opening stroke: 400 mm Maximum platen distance: 610 mm Weight: 2700 kg Dimensions (m) L x W x H: 3.8 x 1.1 x 2.1 m Control: NC4

Condition: ready for operation (used), Year of construction: 1985, 1 used spotting press Manufacturer: REIS Model: TUS 160 OK 200 Year of manufacture: 1985 Technical details: Press force: 200 t Table length: 2200 mm Table width: 1550 mm Installation height: 2200 !! mm Hsdoyb Stqjpfx Abhjp Ram return force: 6,000 kg Table load capacity: 10,000 kp Total power requirement: ? approx. 25–30 kW Machine weight: approx. 30 t Space requirements: approx. 4 × 7 × 7 m Shipping dimensions: approx. 13.4 × 3 × 3 m