Used Esta Dustomat 62 for sale (3,370)

Condition: good (used), Technical data for the locking pin: System: Arestant Type: AS Scope of delivery: 10x locking pins, used Material color: fully galvanized Weight: 0.018 kg/unit For securing longitudinal beams against unintentional lifting Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Any transport or shipping beyond this is subject to additional costs, which can be individually requested from us depending on the delivery location or scope of delivery. Gsdsw Hbhpspfx Ahaouf

Condition: good (used), Scope of delivery includes: 01x Steel staircase Material color: yellow Gsdpfxevntb Se Ahasuf Floor height: approx. 1,890 mm Projection: approx. 2,650 mm Total width: approx. 1,208 mm Stringer profile: 200 x 5 mm Railings: on both sides Handrail and knee rail: rectangular tubing Steps: smooth Step dimensions: 1,108 x 250 mm Number of steps: 11 steps Riser height: approx. 180 mm Overall stair length: approx. 3,320 mm End stop: L-profile: 100 x 55 mm Note: The steel staircases are partially assembled and partially unassembled. The images are for material illustration purposes only. The steel staircases are picked and shipped unassembled. This is a used item; scratches, dents, and signs of use may be present. Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping is required, this is subject to additional costs which can be requested from us depending on the delivery location and scope of delivery.

Condition: good (used), The scope of delivery includes: 01x steel staircase Material color: yellow Floor height: approx. 1,9450 mm Projection: approx. 2,645 mm Total width: approx. 1,220 mm Chest profile: 180 x 8 mm Railing: both sides, galvanized Handrail and knee rail round tube Steps: tear plate, galvanized Step dimensions: 1,204 x 270 mm Number of steps: 10 steps Step height: approx. 190 mm Total length of the stairs: approx. 3,320 mm End stop: L-profile: 85 x 85 mm The end stop of the steel stairs is attached with 2 screws per side Drill hole diameter: approx. 16 mm Note: The steel stairs were partially assembled and partially unassembled. The pictures are intended to illustrate the material. The steel stairs are commissioned unassembled. This is a used item, it may have scratches, dents and signs of use. Your contact person in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch Gusdpfx Asvntmnehajf General information about the item: This item is only available for collection. Any additional transport or shipping of this item is associated with additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: good (used), Included in the delivery: 01x Base plate, new Manufacturer: Arestant NS Type designation: STD Base Plate BP80 Material finish: Sendzimir galvanized For frame profile width: 80 mm Material thickness: 6.00 mm Total width: 118 mm Total depth: 150 mm Height: 45 mm Number of mounting holes: 03 pcs. Hole diameter: 13 mm Weight per unit: 0.83 kg / pc. Your contacts in our company: Guodpfxoxgp E Tj Ahaof Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about this item: This item is offered for collection only. If transport or shipping is required, additional costs will apply, which can be requested from us depending on the delivery location and scope of supply.

Condition: good (used), clear span: 2,700 mm, Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Technical data for the pallet racking traverse: Racking system: Arestant Type: NS The scope of delivery includes: 01x pallet racking beam, used Material color: orange Box profile: 100 x 50 mm Beam type: 10515CN Bracket: 4 HK (hooks) Clear width: 2,700 mm max. load per pair of beams 1,500 kg, with evenly distributed load. ( observe bay load ) 02x locking pins, used Version: completely galvanized For securing the side members against unintentional lifting out General information about the item: This item is only available for collection. Any additional transportation or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery. Our services at a glance: (Prices on request) Assembly and installation Our general assembly conditions must be observed Shelf inspection Rack inspection in accordance with DIN EN 15635 carried out in accordance with the Requirements of BGR 234 Visual inspection for all racking systems Godpfx Asvi Errjhaeuf Delivery with our own fleet of vehicles (without unloading)

Condition: good (used), Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank Used steel staircase / machine access platform Gedohhxu Hepfx Ahaeuf Floor height: approx. 515 mm Outreach: approx. 590 mm Total width: approx. 700 mm Mesh size: approx. 25 x 25 mm Material color: yellow Tread dimensions: 1x approx. 675 x 250 mm (upper tread) 1x approx. 475 x 250 mm (lower treads) Number of treads: 2 pieces / treads installed Tread height: approx. 265 mm General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location and scope. Our services at a glance: (Prices upon request) Assembly, installation Our general assembly conditions apply Rack inspection Rack inspection according to DIN EN 15635, performed according to the requirements of BGR 234, visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: good (used), Scope of delivery includes: 01x stacking box, used External dimensions: 400 x 300 x 120 mm Internal dimensions: 360 x 260 x 117 mm Colour: similar to anthracite grey Gsdpfx Asw E Ixrohaeuf Weight: 0.62 kg per unit Notes: The material is food-safe and made of polypropylene (PP). General information about the item: This item is only offered for collection. Delivery or shipment of this item will incur additional costs, which can be quoted separately depending on the place of delivery and the scope of delivery.

Condition: good (used), clear span: 2,250 mm, Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Technical data for the pallet racking traverse: Racking system: Arestant Type: NS The scope of delivery includes: 01x pallet racking beam, used Material color: orange Box profile: 100 x 50 mm Beam type: 10515CN Bracket: 4 HK (hooks) Clear width: 2,250 mm max. load per pair of beams 1,500 kg, with evenly distributed load. ( observe bay load ) 02x locking pins, used Version: completely galvanized For securing the side members against unintentional lifting out General information about the item: Gusdovi E Dhopfx Ahajf This item is only available for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery. Our services at a glance: (Prices on request) Assembly and installation Our general assembly conditions must be observed Shelf inspection Rack inspection in accordance with DIN EN 15635 carried out in accordance with the Requirements of BGR 234 Visual inspection for all racking systems Delivery with our own fleet of vehicles (without unloading)

Condition: good (used), clear span: 3,300 mm, Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Technical data for the pallet racking traverse: Racking system: Arestant Type: NS The scope of delivery includes: 01x pallet racking beam, used Material color: orange Box profile: 100 x 50 mm Beam type: 10515CN Bracket: 4 HK (hooks) Clear width: 3,300 mm max. load per pair of beams 1,500 kg, with evenly distributed load. ( observe bay load ) 02x locking pins, used Version: completely galvanized For securing the side members against unintentional lifting out General information about the item: This item is only available for collection. Any additional transportation or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery. Our services at a glance: Godsvivw Sspfx Ahasuf (Prices on request) Assembly and installation Our general assembly conditions must be observed Shelf inspection Rack inspection in accordance with DIN EN 15635 carried out in accordance with the Requirements of BGR 234 Visual inspection for all racking systems Delivery with our own fleet of vehicles (without unloading)

Condition: used, turning diameter over bed 460 mm turning diameter over slide rest 260 mm turning length 1500 mm turning diameter in the gap 600 mm turning speeds 22 - 1500 U/min centre height 230 mm total power requirement 6,5 KW Gjdpfx Ajzhn Uvohajuf weight of the machine ca. 1,8 t dimensions of the machine ca. 2,8 x 1,2 x 1,5 m Centre lathe - Forkardt F200 3-jaw chuck - Multifix quick-change tool post - Steady rest - Chip tray - Tailstock centre

Condition: excellent (used), Year of construction: 1984, machine/vehicle number: RS118/2, Technical data: 1 Zasche / steel ZHD 2000 pillar jib crane NL 2000 KG Payload at full reach 2000 KG / 2 tonne payload Gedpfx Ahjvzkw Deaeuf Height: approx. 3.5m, UK boom: approx. 2.45m Reach: approx. 3m, hook height: approx. 2.45m Total weight approx. 1000 kg with steel chain hoist 2000KG Connection to 400V 16A, swivel range 360° Test book is available Crane is dismantled and immediately available Item location is 75053 Gondelsheim Only the crane system shown in the pictures is for sale Very good condition, see pictures Shipping by freight forwarder or collection by appointment

Condition: used, functionality: fully functional, In this offer you purchase a used Multi Purpose Stacker "Plockmatic MPS" Gujdewnqp Espfx Ahaef Object of sale: 1 x Plockmatic MPS Type F139-101 Fits other Plockmatic finishing machines Fits various Canon / Ricoh machines Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping are available on request! For further information you can of course also contact us personally.

Year of construction: 1988, condition: used, Voest Alpine DA 160 lathe year 1988 with three-jaw chuck , Multifix. , Ready for demonstration under power by arrangement. Gjdpfxsma Snxs Ahaeuf

Condition: ready for operation (used), functionality: fully functional, Crimping press ready for use. Fully functional. 5 units available. Gujdpox H Um Ejfx Ahaof

Year of construction: 2012, condition: excellent (used), machine/vehicle number: HIKSA250Aneu, Complete Telemecanique / Schneider Canalis KSA - 400A busbar system available! Stock 75 running meters!!! Type KSA 250A / 250 amps - 5 poles - L1 L2 L3 N PE Voltage Ui max. 690V, frequency 50 - 60 Hz Rail length predominantly 5m, also 1.5m and 3m available Price per meter including connectors, end pieces and brackets Feed and outlet boxes 16-32-63A are available as options (other tap-off boxes 125 - 250A available on request) The dismantling was carried out by a qualified electrician. Busbars are in GREAT condition!!!! Please ask for the desired lengths or accessories! Stock items, available immediately!!! ----- old Kloeckner Moeller BD1 system still available! Godpfx Aopgmryjhasuf Busbars, corner parts, feeds and outlet boxes for the old Kloeckner Moeller BD1 / BD 1 system in stock!!! Please ask ! Are you also looking for a crane system?

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, Arch press for small formats BAS 450-KF8 For pressing individual products (small folds) in single or multiple up applications Two pairs of press rollers, adjustable independently - Pre-press roller with 40 mm diameter - Main press roller with 60 mm diameter Easy and quick adjustment of sheet thickness Effortless repositioning of infeed belts Format change without tools Integrated control unit (Start/Stop) Height adjustment via lifting table (infeed height min. 550 mm / max. 900 mm) Format min.: 30 mm x 50 mm / max.: 450 mm x 450 mm Maximum product thickness: 8 mm Pressing force: 8,000 N Speed: 30-160 m/min Gsdpfxoxvfaxs Ahasuf

Condition: used, Frame: 9550 mm Crossbeams: 2700*100 mm, 2900*100 mm Load capacity: 2400 kg/level If you need shelves or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used shelves as well as accessories and are happy to support you with your planning. Further accessories such as: Guedpfx Aov D Ix Djhaof Frame, corner, and impact protection, push-through protections, chipboard panels, grating, rear wall grids, depth bars available. Shipping: Please inquire about shipping costs by providing your postal code, location, and desired quantity of articles. Further services: Planning, shelving assembly/disassembly, purchase/sale Subject to changes and errors in the technical data, information, and prices as well as prior sale!

Condition: good (used), functionality: fully functional, roll diameter: 48 mm, roll width: 48 mm, roll pitch: 85 mm, total width: 600 mm, total height: 620 mm, total length: 4,750 mm, conveying length: 4,750 mm, construction width: 600 mm, construction height: 620 mm, empty load weight: 80 kg, TAF item number: 1000005688 Manufacturer: Nestaflex Year of manufacture: unknown Overall dimensions (LxWxH) in mm: 1,400 x 600 x 620 Width incl. drive: 600 Conveyor length in mm: from: 1,400 to: 4,750 Conveyor width in mm: 500 Conveyor height in mm: from: 620 to: 950 Load capacity between 2 feet: Number of feet: 4 Roller type: steel Rollers per axle: 5 Roller spacing in mm: 85 Roller diameter in mm: 48 Gujdpfex Dmx Ejx Ahajf Net weight: 80 kg Condition: used / fully functional Function test: OK

Condition: excellent (used), Pneumatic power clamp Make DESTACO type 82L 3G-251C8HO used from machine dismantling length 200 mm width 35 mm height 75 mm Gedpfx Ahsq Evrasaouf 2 x available

Condition: ready for operation (used), VOEST DA 360 / Heidenhain digital display -Center height above bed: 400mm -Turning diameter above bed: 800mm -Turning diameter above cross slide: 500mm -Turning length: 1000mm -Bar capacity: approx. 87mm -Spindle speed range: 14 - 1000 rpm / 18 spindle speeds -Automatic longitudinal / facing feeds -Automatic rapid traverse on Z-axis -Tailstock MK 5 -Collet chuck 250mm Guedeza Dh Repfx Ahaef -Multifix base with inserts -Work light -Machine feet -Documentation Dimensions: L x W x H: 3 x 1.5 x 1.7 meters / Weight: 3500 kg Errors and omissions excepted.

Condition: refurbished (used), machine/vehicle number: 4507, Rectificadora sin centros ESTARTA 327 CNC Godpfog Ix Hmsx Ahaeuf

Condition: used, TECHNICAL INFORMATION: Grinding wheel dimensions (h x w x d x w) Ø610 x Ø304,8 x 254 mm Gsdpfxohzvk Es Ahaouf Ø min/max to be ground 1,5 / 125 mm Width of regulating grinding wheel 254 mm Number of regulating wheel speeds infinite Diamond speed 225 min1 Plunge (auto/manual) 254 mm Grinding wheel dimensions (h x w x d x w) Ø355 x Ø203,2 x 254 mm Width of the grinding wheel 254 mm Maximum length to be ground in plongeé 254 mm Motor power of grinding wheel head 30 kW Hydraulic motor power 0,37 kW Length 5.175 mm Width 2.950 mm Weight 8.375 kg

Condition: refurbished (used), GENERAL CHARACTERISTICS Gsdpfx Ahjd Nakteasuf Ø Grinding Wheel Dimensions (OD x ID x width) 508 x 304,8 x 254 mm Grinding wheel width 254 mm Regulating wheel width 254 mm Regulating wheel speed nº infinitas Min/max Regulating wheel speed (r.p.m.) 10/250 r.p.m. Dressing (Auto/Manual) Manual Lubrication (Auto/Manual) Automático / Automatic Control type ((CNC/Manual) CNC CNC Brand FANUC CNC Model Oi Mate - TD Regulating Wheel Dimensions (OD x ID x width) 305 x 190,5 x 254 mm ELECTRICAL CHARACTERISTICS Power hydraulic motor 0,55 kW Total Power 27 kW Voltage 220/380 V DIMENSIONS AND WEIGHTS High 1.900 mm Long 2.300 mm Weight 6.420 kg Width 1.885 mm

Condition: used, Centerless grinding machine ESTARTA 310 Gusdeq Ehqfspfx Ahajf

Condition: refurbished (used), GENERAL CHARACTERISTICS Ø min / max to grinding 2/150 mm Maximum Infeed grinding length 355 mm Ø Grinding Wheel Dimensions (OD x ID x width) Ø610 x Ø304,8 x 355 mm Grinding wheel width 355 mm Regulating wheel width 177,5 mm Regulating wheel speed nº infinitas Min/max Regulating wheel speed (r.p.m.) 10/225 r.p.m. Control type ((CNC/Manual) CNC CNC Brand FANUC Regulating Wheel Dimensions (OD x ID x width) Ø350 x Ø203,2 x177,5 mm ELECTRICAL CHARACTERISTICS Coolant system motor power 0,70 Kw. Motor power grinding wheelhead 37 Kw. Total Power 45 Kw. Voltage 220/380 Kw. Gjdod Nakvopfx Ahasuf DIMENSIONS AND WEIGHTS Weight 14.000 Kg