Used Ferag Multi Disc for sale (11,983)

Condition: used, machine/vehicle number: WFDFLT21802036328, empty load weight: 3,200 kg, maximum load weight: 14,800 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 01/2025, next inspection (TÜV): 01/2027, total length: 10,020 mm, total width: 2,550 mm, total height: 1,040 mm, suspension: air, tire size: 445/45 R19,5", tire condition: 60 %, color: grey, Note: The images shown are archive photos. The vehicle may currently be in use! Tandem-Axle Swap Body Trailer Type TWP 180 Mega-EL WEIGHTS AND DIMENSIONS Gross vehicle weight: 18,000 kg Payload approx.: 14,800 kg Axle assembly load rating: 18,000 kg Support load (drawbar): 1,000 kg Unladen weight (base version) approx. only: 3,200 kg +/- manufacturing tolerance Frame height lowered approx.: 1,010 mm Fedpfx Aszufl Soatepl Frame height raised approx.: 1,390 mm Frame height in driving position approx.: 1,070 mm Parking height approx.: 1,040-1,320 mm Standard stop to front locking approx.: 985 mm Locking distance: 5,853 mm Coupling height approx.: 380 mm Parking heights apply on level ground. The towing vehicle must have a similar lift stroke to the trailer, otherwise the body will sit at an angle. CHASSIS - CENTRE-AXLE SWAP BODY TRAILER Fine-grain steel welded construction Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear 4 twist locks with sturdy brackets, 20" base For 7.45 m swap bodies (Note: combined with the underrun protection, this projects beyond a 7.15 m swap body) 1 pair of geared landing legs front, straight foot, single-side operation on the right 1 pair of geared landing legs rear, straight foot, single-side operation on the right 2 wheel chocks with holder Aluminium side underrun protection Steel rear underrun protection Rear mudflaps, full width (not combinable with forklift pocket holder) Half-shell mudguards Mudflaps DRAWBAR / TOWING GEAR (CENTRE-AXLE TRAILER) Drawbar with certified 50 mm towing eye, haulage version Adjustable drawbar coupling height, 2,200 mm Coupling height: 380 mm AXLES & SUSPENSION SAF disc brake axles Axles/running gear laser-aligned - reduces tyre wear and fuel consumption Air suspension BRAKING SYSTEM Two-line compressed-air braking system Colour-coded line routing for easy servicing Air reservoir capacity: 208 litres Spring-loaded parking brake 2 mismatch-proof coupling heads at front, with connecting lines to the tractor unit, connection on the right 24V EBS (electronic braking system) with EBS plug at front, connecting cable, connection on the right Note: This trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With raise/lower valve, hold function in both lowered and raised position WHEELS AND TYRES 445/45 R19.5", make at manufacturer's discretion Steel rims, factory silver ELECTRICS 24V multi-chamber lights, yellow LED side marker lights 2 white position lights at front 2 white/red rear outline marker lights 2 x 7-pin mismatch-proof plugs at front, with connecting cable, connection on the right 2 additional LED work lights at the rear, activated via reversing light 1 LED work light front-centre between the beams, facing rearward, activated via reversing light REGISTRATION COUNTRY / PLATES Germany With DEKRA inspection and certificate (acc. to §13 EC-FGV) 24/7 service hotline Prepared for single-line number plate holder Contour marking with reflective tape acc. to ECE R48, white on sides, red at rear PAINT Frame: DB 7350 Nova grey 10-year warranty against corrosion perforation

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 2,800 kg, maximum load weight: 15,200 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 9,300 mm, total width: 2,550 mm, total height: 1,300 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications. ### Chassis – Turntable Drawbar Trailer for Roll-Off Containers * High-tensile steel welded chassis construction * Sliding frame system: * The container is loaded from the rear onto the sliding frame and pushed forward * Front container stop adjustable for 6.0 m, 6.5 m and 7.0 m roll-off containers with external rollers * Container locking system: * 2 pairs of recessed locking hooks integrated into the floor * Pneumatic operation * Internal 2-point locking system * Not suitable for roll-off containers with internal centre beam * Designed for the transport of roll-off containers with subframe according to DIN 30722 * Heavy-duty turntable with ball-bearing slewing ring * 2 wheel chocks with holders * Aluminium side underrun protection * Steel rear underrun protection * Semi-circular mudguards * Rear impact protection, mounted vertically on left and right side, with delta rubber buffers on underrun protection brackets * Spare wheel carrier for 1 spare wheel, including wheel mounting kit * Plastic toolbox with drawer and shelf insert, dimensions: 650 x 520 x 670 mm (W x H x D), lockable with padlock ### Drawbar * Drawbar with certified 40 mm towing eye ### Axles & Suspension * SAF disc brake axles * Laser wheel alignment of axles and suspension for reduced tyre wear and lower fuel consumption * Air suspension with raise-and-lower valve ### Wheels & Tyres * 385/55 R 22.5 tyres * Manufacturer's choice * Steel rims, factory silver finish ### Braking System * Dual-line compressed air braking system * Spring-loaded parking brake * Drive-away protection: opening the container locking system automatically activates the spring-loaded parking brake * Vehicle Stability Control System * Two non-interchangeable coupling heads at the front with connecting lines to the towing vehicle * EBS (Electronic Braking System) with front EBS connector and connecting cable Note: The trailer may only be operated with towing vehicles that ensure proper ABS functionality. ### Electrical System * 24 V electrical system * Multi-chamber rear lights * Yellow LED side marker lights * 2 white front position lights * 2 white/red rear outline marker lights * 2 additional LED work lights at the rear, activated via reverse gear * 2 x 7-pin non-interchangeable front plugs with connecting cable ### Registration & Compliance Fpjdpezggghefx Aatel * Registration country: Germany * DEKRA inspection and certification included (according to §13 EC-FGV) * 24/7 service hotline * Prepared for single-line licence plate holder * Reflective contour markings according to ECE R048 (white on the sides, red at the rear) ### Paint Finish * Chassis: hot-dip galvanised or painted according to customer requirements * Drawbar: black KTL coating (cathodic dip coating) Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications.

Condition: used, mileage: 7,21,000 km, power: 353 kW (479.95 HP), first registration: 11/2016, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), Tel.: call (Contact · Telephone · Mobile · WhatsApp) Special Equipment: Aero kit, 225 Ah battery, mechanical battery isolator switch, ETA circuit breaker, comfort driver’s seat - air-suspended and heated, with lumbar support and adjustable shoulder area, flame starting system, 12-speed gearbox - type: ZF 12 AS, Tipmatic, single-cylinder air compressor 360 cc with Air Pressure Management (APM), heated air dryer, Eberspächer D4S additional air heater, retarder, 12V and 24V cab socket, fleet management system control module, cab door extension, additional high beam/fog lamps with cornering function, heated fuel pre-filter with water separator Additional Features: Axle configuration: 4x2, ambient lighting, curb/front mirror, 24V / 7-pin trailer socket, ABS trailer socket, anti-slip regulation (ASR), audio system: MAN Media Truck Advanced 12V radio with navigation system pre-installation, electrically adjustable and heated exterior mirrors, heated wide-angle mirror, MAN-Tronic on-board computer, right kerb mirror, rear axle differential lock, MAN-Brakematic electronic braking system, EURO 6 engine, cab with Nordic insulation, cab: XLX, suspension: leaf / air, electric windows, remote central locking, tinted windshield, 28 V 80 A alternator, manual sunroof, superstructure: tractor unit, EVB brake rocker, automatic climate control, heated fuel filter, fuel tank: combination tank - 400 L diesel + 60 L AdBlue, multi-function steering wheel, raised air intake, engine 12.4 L - 353 kW diesel, engine compartment encapsulation, wheelbase 3600 mm, side-mounted spare wheel carrier, fifth wheel: Jost JSK 37 C, rear axle disc brakes, front axle disc brakes, tinted rear side windows, comfort quality seat upholstery, sunblind for front windshield, sunblind for side window, driver’s door, spray reduction, stabilizer on one rear axle, front axle stabilizer, external access storage box, TGX, tinted door windows, viscous fan, central locking, permissible gross weight 18,000 kg * MAN TGX 18.480 4x2 BL * 2x bed * Sleeper cab * Refrigerator Fjdpfxoxtd Ezs Aatspl * Automatic transmission * Retarder * Corrosion protection * Distance sensor * Cruise control * Lane assist * Tipping hydraulics * Displacement: 12,419 cm³ * Power: 353 kW * Euro 6 * FIN WMA06XZZ3HM729951 * Engine damage * Lower bearing seized * 721,581 km * Year of manufacture: 15.11.2016 * Net price * All information without guarantee

Condition: good (used), Year of construction: 1995, Multi-blade saw in very good condition. Chain width: 350 mm, with spikes. Maximum cutting height: 120 mm. Motor power: 22 kW. Fodpfx Aaezlk Umjtspl

Condition: new, maximum load weight: 31,330 kg, overall weight: 36,000 kg, axle configuration: 3 axles, total width: 2,470 mm, total height: 1,280 mm, Year of construction: 2026, Equipment: ABS, FT-LS-S-ECO D-TEC FLEXITRAILER FT-LS-S * 3-axle multi-container chassis, suitable for 45 ft containers (overall length >16.5m, 2 wheelbases) * Compatible with 40 ft (2 wheelbases), 30 ft, 2 x 20 ft, and 20 ft rear-flush containers * 9-ton Valx axles with Ø 430 mm disc brakes * ET 120 offset rims * Automatic lift axle on the first axle, operable via a switch on the chassis or by pressing the service brake three times * Start assist: Axle load distribution to the 2nd and 3rd axles up to 130% below 30 km/h * Lifting/lowering controlled by EBS modulator * Tire size: 385/55 R22.5 * Fifth wheel height: 1,100 mm * Branded tires as per manufacturer's choice, with tire pressure monitoring system * Wheel chocks * Removable hot-dip galvanized front container guides * Upper frame surface hot-dip zinc sprayed * Coating: 1-coat 2K RAL 9005, matt * 15-pin connector Fodpfx Asyq Ufzeatjpl * Flashing side marker lights * Multi-compartment tail lights

Condition: ready for operation (used), functionality: fully functional, The MPFSH-075-01 Multi-Fill dosing machine is an ideal solution for the precise dosing of various food products. Thanks to its versatile design, it can handle a wide range of products, such as cooked pasta, rice, vegetables, cut fruit, surimi, chilled salads, and even cooked meats. Indeed, this machine stands out for its ability to precisely dose difficult-to-handle products while ensuring uniform distribution in different types of containers. Furthermore, the machine is designed to operate efficiently, with optimized air and water consumption, reducing operating costs while ensuring consistent performance. Furthermore, its integration into a production line improves productivity and guarantees high-quality results. Furthermore, this robust machine is suitable for demanding industrial environments, offering a durable solution for the needs of the food industry. In short, the MPFSH-075-01 Multi-Fill dosing machine is essential equipment for companies looking to improve the efficiency of their dosing processes while ensuring consistent product quality. Technical Specifications: Model: MPFSH-075-01 Brand: Multi-Fill Year of Manufacture of this Multi-Fill Filling Machine: 2006 Air Consumption: 60 CPM > 80 PSI / 30-35 Cubic Feet/min / 5.5 Bar / 51-60 Nm/hour Water Consumption: 0.75 – 1 Gal/min / 2.8 – 3.8 Liters/min Total Required Frequency with Air Vacuum = 0.45 kW Products Filled: Cooked pasta, rice, cut vegetables and fruits, surimi, chilled salads in a variety of containers, cooked meats. Fpsdpfxowf D Rwj Aatsl HTwLg8C1

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, CATALOG NUMBER 7563 Technical data: Fodpfxezxqtve Aatjpl - track width: 340mm - shaft width: 360mm - blade bore diameter: 70mm - max. blade diameter: 315mm - max. cutting height: 180mm * from above - feed shaft, toothed, pneumatically pressed - 2 rows of kickback fingers - 3 smooth pressure slip rollers - kickback fingers - shaft with saw blades - 3 smooth pressure slip rollers - kickback fingers * from below - infeed traction shaft, toothed - track - shaft with saw blades - track - stepless feed speed regulation via inverter - main motor 2x55kW - feed motor 4kW - electric lifting of upper body up/down - electric adjustment of saw blade shafts - central lubrication - extraction port diameter: 2x150mm - dimensions (L/W/H): 2800x2400x1900mm - weight approx. 5000kg ADVANTAGES – Italian production – double shaft – ideal for large elements – used multi-blade saw, in very good condition Net price: 145,900 PLN Net price: 34,740 EUR based on 4.2 EUR rate (Prices may change with significant fluctuations)

Condition: excellent (used), Track width: 300 mm Minimum length of workpiece: 390 mm Minimum width of workpiece: 12 mm Minimum height of workpiece: 8 mm Maximum width of workpiece: 950 mm Saw blade diameter: 350 mm Blade bore diameter: 70 mm Spindle speed: 4200 RPM Main motor power: 35 HP (approx. 25.7 kW) Fedpfxezxxuzo Aatjpl Variable feed speed: 6–48 m/min Table dimensions: 1530 × 1100 mm Machine weight: 1800 kg Year of manufacture: 2008 Certification: CE

Condition: good (used), mileage: 7,37,020 km, power: 353 kW (479.95 HP), first registration: 02/2021, fuel type: diesel, tire size: 385/55R22,5, axle configuration: 6x2, wheelbase: 4,600 mm, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 16, emission class: euro6, suspension: air, number of seats: 2, total length: 9,430 mm, total width: 2,550 mm, total height: 4,010 mm, Year of construction: 2021, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking heater, power mirror, seat heater, traction control, trailer coupling, - 2. Diesel tank - Heated mirrors - Digital tachograph - Trip recorder (control unit) - Fixed Fpjdpfx Aszrt Hxjatsl - LED lamp - Manual - Space Cab - Lane keeping assist - Fabric Number of axles: 3, Configuration: 6x2, Payload: 16883 kg, Tare weight: 10117 kg, Gross vehicle weight: 27000 kg, Total tank capacity: 860 liters, 2. Diesel tank, Trailer coupling, Trailer load, unbraked: 750 kg, Trailer load, center axle, braked: 24000 kg, Axle pin diameter: 50 DIN, Fifth wheel coupling: Fixed, Number of locks: 1, Suspension type: Air suspension, Cabin type: Space Cab, Cruise control, Trip recorder (control unit), Digital tachograph, Air conditioning, Auxiliary heating, Electric windows, Electric mirrors, GPS navigation, Color: Multi-colored, Heated mirrors, Lighting type: LED lamp, Lane keeping assist, Climate control, Seat heating, Bluetooth, Blinking lights, Engine power: 353 kW (473 Hp), Fuel: Diesel, Euro: 6, Transmission type: Manual, Transmission type: ZF, Gears: 16, Clutch pedal, Power steering, ABS, ASR, Rotation direction: 1x20, System length: 80 cm, System type: ., Central locking, Seats: 2, Seat arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual Transmission Transmission: ZF, 16 gears, Manual transmission Axle configuration Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire size: 385/55R22.5; Steered; Tire tread depth left: 2 mm; Tire tread depth right: 3 mm Axle 2: Tire size: 315/70R22.5; Double tires; Tire tread depth left inside: 5 mm; Tire tread depth left outside: 5 mm; Tire tread depth right inside: 4 mm; Tire tread depth right outside: 3 mm Axle 3: Tire size: 385/55R22.5; Lift axle; Tire tread depth left: 1 mm; Tire tread depth right: 1 mm Weights Tare weight: 10,117 kg Payload: 16,883 kg GVW: 27,000 kg Functional Loading platform height: 104 cm Maintenance APK (Periodic Vehicle Inspection): valid until 04.2027 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial information Leasing price: 514 € per month (standard, 60 months); Ask for more information and conditions Identification License plate: 55-BRH-8 Kleyn Trucks is one of the world's largest independent traders in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractors, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! • Large and rapidly changing stock • Recognizable quality • A good price • Correct business practices • We speak many languages • We understand our customers • Support with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Calculate your leasing rate quickly and send an inquiry via our website. Ask directly about our European warranty package.

Year of construction: 2022, condition: excellent (used), functionality: fully functional, 1 x Yamato Dataweigh 14-head weigher with RCU-920 Remote Control Unit touch-screen control panel, top cone and collating funnel. Fitted with smooth weighing pans this weigher is ideal for free-flowing dried goods only. Model – ADW-E-1014S (Dataweigh Epsilon Series). Serial number - WG251076. Fpsdpfx Aaozydaxjtjl Date of manufacture - 2022. Weighing range - 20g to 3000g. Maximum pack volume - 10 litres. Speed - up to 100 drops / minute. Electrical requirements - 200-240 V / 50-60 hz / 1 phase. Overall dimensions - 1600mm long x 1600mm wide x 1530mm high. Supplied with User Manual, Drawings (including electrical) and Parts Manual.

Condition: used, machine/vehicle number: WFDFLT33502019721, empty load weight: 6,927 kg, maximum load weight: 28,073 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 07/2016, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/55 R19,5", color: black, Attention: The pictures shown are archive images. The vehicle may still be in operation! Chassis Fine-grain steel welded chassis with lightweight design, equipped with a replaceable 2" kingpin. Slightly angled outer frame with Load-Lock profile for load strap attachment. Note: When sideboards are fitted, they must be opened before straps can be attached. Not usable in the gooseneck area. Additional 10 pairs of recessed lashing rings, each rated at 2.5 t. 24-tonne two-speed landing gear with single-side operation and straight foot, without compensating mechanism. Foldable front support legs, extendable and foldable outward in front of the headboard; positioned as far inward as possible during transport. Rear access ladder, side-mounted door retainers, wheel chocks with holders, aluminium side underrun protection, galvanized steel rear underrun protection, quarter fenders in front of the first axle and behind each axle, anti-spray mudflaps behind each axle, rear impact protection with Heavy Blocker cross beam, heavy-duty pallet stop on both sides (approx. 20–25 mm high) with lashing points every 200 mm. Loading height reduced by approx. 20–25 mm. Plastic toolbox. Axles & Suspension SAF disc brake axles with air suspension, without lift axle. Braking System Dual-line air brake system with spring parking brake. Two colour-coded coupling heads at the front without connecting lines. Electronic Braking System (EBS) with front EBS socket (without connecting cable). Note: The trailer may only be operated with towing vehicles that ensure full ABS functionality. Equipped with raise/lower valve and Vehicle Stability System (RSS). Electrical System 24 V electrical system with multi-chamber lights, yellow LED side marker lights, two white LED front position lights, two red/white rear outline marker lights, and 2 × 7-pin plus 1 × 15-pin front sockets (without connecting cables). Floor Steel front floor section with anti-slip coating. Approx. 30 mm phenolic plywood floor, Omega-reinforced cross joints, longitudinal support beams for high point loading, suitable for forklift axle loads up to 7,100 kg. Steel chequer plate flooring in the wheel area. Front Wall Front bulkhead approx. 2,580 mm high with steel corner posts in volume design. Front curtain release mechanism. Internal steel impact protection up to approx. 140 mm height. Sliding Posts Fpjdpskyrlwsfx Aatol Three pairs of full-length sliding posts with four socket positions and extended lower pockets. Three post positions with aluminium side slats. Rear Frame Steel rear corner posts extending to roof level, curtain tensioning system with round tube and ratchet. Double rear portal doors with two internal locking rods per door. Curtain PVC curtain with welded horizontal and vertical reinforcement straps, stainless steel tension buckles, and customer branding on the rear portal. Roof Sliding roof with rear end-lift, opening from rear to front. L-roof beams suitable for automotive logistics. Internal roof width approx. 2,490 mm. White roof curtain. EcoLift lifting roof, adjustable by approx. 380 mm with gas strut assistance. Anti-Ice System with centrally positioned hose and automatic ventilation. Registration & Certification Approved for registration in Germany, type-approved according to EC Directive 2007/46. EN 12642 XL load securing certificate (valid only with four rows of aluminium side slats), additional DC 9.5 certificate

Condition: repair required (used), Disc chipper Bruks IDC000127 - infeed 220 X 280 mm Fedpfovzw Tfox Aatepl - without electric motor

Condition: new, axle configuration: 2 axles, Year of construction: 2026, Equipment: ABS, ZWF/W 18 Center Tube, Central Axle Lift Trailer, Tire Size 22.5, Single Dimensions Chassis designed for interchangeable bodies from 7150 to max. mm (symmetrical bodies) Chassis designed for rear-flush mm (with impact buffer) Test lowering heights: ZWF: Vehicle must lower at least +70mm and raise -20mm, WF: +60mm/-20mm, WFS: +60mm/-20mm Axle loads: 18,000 kg (2 x 9,000 kg) Spring center approx. 1300 mm Support load approx. 1000 kg Lowering heights approx. 1120 to max. 1320 mm via air suspension of the trailer and the tractor unit Coupling height (low coupling) approx. 400 mm unladen Ride height unladen approx. 1100 mm 2nd ride height, if axle lift is used, is approx. 40 mm higher (tire lift via axle lift increases the ride height), only if necessary Ground clearance approx. 1070 mm on level ground Chassis No. generally stamped on the side of the longitudinal member, right side, approx. 100 mm from the front E-wheel holder Prepared for E-wheel holder in winch design for 1 E-wheel Fpedpfxszir Ipo Aatjl Front stop, foldable and adjustable for 7150 mm symmetrical interchangeable bodies Support winches 1 set of drop-leg supports at the rear, height-adjustable 1 set of support winches at the front Coupling device Coupling spring travel approx. 1400 mm Intermediate distance 760 mm (with mm interchangeable body) Connection lines for lights/brakes, route lines inside/on the drawbar on the right Storage for connection lines on the side of the drawbar Drawbar rigid (center tube) with bolted drawbar eye Drawbar eye ø 50 mm SMB axle with Haldex/Wabco/Knorr brake and Weweler air suspension selected 2x axle with large disc brake (430, or 4309/4312/4345) 2x axle 9t 22.5 disc brake, single tires for air suspension Bellows plates, rotate at 340-400 lift (not on the bogie, not with SMB) Lifting and lowering device with 1 rotary slide valve Knorr/Wabco Axle distance approx. 1360 mm (with total lift of approx. 300 mm, 340 mm or 400 mm) 2x air suspension, total lift approx. 400 mm 1 coupling head each, red and yellow Test nipple for brake cylinder pressure on the brake cylinder at the front right Air reservoir 2 x approx. 80 l in steel, painted black (1x brakes, 1x lifting and lowering) Lifting and lowering device at the rear left in the direction of travel Tire pressure control, basic version, connected to the CAN bus system of the EBS Brake/ABS EBS brake system, manufacturer Knorr/Wabco/Haldex at our choice, with Roll Stability Program 2x wheel attachment by center centering 4x tires 385/55 R 22.5 instead of 385/65 22.5, brand manufacturer at choice, system on -wheel 11.75 x 22.5 Brand tires 385/55 R 22.5 at choice Spiralflex Spiralflex cables and hoses for light and brake connection to the tractor unit, with mounting plate (standard) 15-pole plug or socket at the front Lighting system 24 Volt with large multi-function lamp Lighting system/wiring system, manufacturer at our choice (closed lighting system) License plate lighting Rear lights (LED) under the rear container support, beam of light to the rear Rear lights (LED) at the very front, under the stop, beam of light to the rear Side marker lights (LED), flashing (all SIDE lights flash), attention! Possible problems with tractor units! 9 (min.)-pole cable as connection front-rear (min.) Position lights (LED) mounted on a separate holder (not attached to the lamp) Position of position lights: Mounted on the underrun protection (if there is a kink to the rear, the UFS will not be pinched) Position light (LED) at the

Condition: used, machine/vehicle number: WFDFLT33502021621, empty load weight: 5,897 kg, maximum load weight: 29,103 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 06/2017, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/55 R19,5", color: green, Please note: The images shown are archive photos. The vehicle may still be in operation. #Chassis Fifth wheel with replaceable 2" kingpin Slightly angled outer frame with integrated Load-Lock profile for securing lashing straps 24-tonne two-speed landing gear with single-side operation, straight foot design, without load compensation Retractable rear access ladder Side door retainers 2 wheel chocks with holders Aluminium side underrun protection Pallet storage box for 8 Euro pallets, mounted in front of the axle assembly (black lid) Galvanised steel rear underrun protection Quarter-shell mudguards in front of the first axle and behind each axle Fsdpfxozlcdgo Aatjpl Anti-spray mud flaps behind each axle Heavy Blocker rear impact protection with cross beam and side roller buffers Heavy-duty pallet stop on both sides (approx. 15–20 mm high) with lashing points every 200 mm (Loading height reduced by approx. 20 mm.) Lockable plastic toolbox with drawer and storage shelf: 650 × 520 × 670 mm #Axles & Suspension SAF disc brake axles Laser wheel alignment for reduced tyre wear and fuel consumption TIS – Tyre Inflate System (automatic tyre pressure monitoring and inflation system) Air suspension Without lift axle #Braking System Dual-line compressed air braking system Spring parking brake Two non-interchangeable air couplings at the front (without connecting hoses) Electronic Braking System (EBS) Front EBS socket Raise & lower valve Trailer Stability Control System #Wheels & Tyres 385/55 R19.5 tyres Manufacturer's choice Steel wheels, factory silver finish #Electrical System 24 V electrical system Multi-chamber rear lights Yellow LED side marker lights Two white LED front position lights Two red/white rear outline marker lights 2 × 7-pin and 1 × 15-pin front sockets #Floor Approx. 30 mm plywood floor Omega-reinforced transverse joints Longitudinal steel cross members Suitable for forklift axle loads up to approx. 7,100 kg #Front Wall & Front Corner Posts Front wall height: approx. 2,580 mm Steel corner posts Internal steel impact protection at approx. 140 mm height #Sliding Centre Posts pairs of full-length sliding posts Four-way insert pockets Additional long lower pockets 3 selectable post positions #Side Slats Aluminium V-type insert slats #Rear Wall & Rear Corner Posts Steel rear corner posts extending to the underside of the roof Curtain tensioning with round tube and ratchet system Double rear portal doors with two internal locking bars per door #Curtain System Reinforced side curtains with welded horizontal and vertical straps Stainless steel curtain buckles Customer branding "Bring" on both side curtains and rear doors #Roof Sliding roof system opening from rear to front Rear end lift can be folded upwards L-shaped roof rails suitable for the automotive industry EcoLift lifting roof, adjustable by approx. 380 mm on both sides with gas strut assistance Optimised rear rain gutter integrated into the rear roof bow above the doors #Approval & Certifications Country of registration: Germany EC type approval according to Directive 2007/46/EC Manufacturer's body strength certificate according to EN 12642 XL *(valid only when equipped with four rows of aluminium slats)* Additional DL 9.5 certification Heavy-duty pallet stop on both sides, approx. 25 mm high ECE R70 rear warning plate Folding "A" warning plate for waste transport Rear night parking sign

Condition: used, mileage: 54,477 km, power: 81 kW (110.13 HP), first registration: 11/2020, fuel type: diesel, overall weight: 2,800 kg, next inspection (TÜV): 03/2028, color: silver, gearing type: mechanical, emission class: euro6, number of seats: 3, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, INTERNAL VEHICLE NUMBER: M568----VW T6.1 2.0 TDI MILEAGE: 54,477 KM, SERVICED ACCORDING TO SERVICE SCHEDULE LAST INSPECTION WITH OIL CHANGE ON: 06.02.2026 AT 54,254 KM ALL INSPECTIONS WERE CARRIED OUT IN AN AUTHORIZED DEALER WORKSHOP VEHICLE HISTORY AVAILABLE IN DIGITAL FORMAT AT 54,472 KM, ON 18.03.2026, THE REAR BRAKE PADS AND BRAKE DISCS WERE REPLACED ----8 TIRES 4 X NEW SUMMER TIRES ON STEEL RIMS 4 X M+S TIRES----* BRAKE ASSIST * CROSSWIND ASSIST * FRONT ASSIST * CRUISE CONTROL * SPEED LIMITER * MULTI-COLLISION BRAKE * PARKING SENSORS FRONT + REAR * REARVIEW CAMERA * NAVIGATION SYSTEM * AUTOMATIC HEADLAMP ADJUSTMENT * SOS BUTTON * AUTOMATICALLY DIMMING REARVIEW MIRROR * AIR CONDITIONING * START/STOP SYSTEM ----SEAT HEATING ----HEATED WINDSCREEN ----CARGO AREA VENTILATION ----FIRE EXTINGUISHER----TIRE LASHING RINGS----VEHICLE EQUIPMENT BY FIRM BOTT SHELVING SYSTEM WITH DRAWERS AND EXTENDABLE WORKBENCH BOTT VARIO FLOOR PANELS 3 DRAWERS 3 DRAWERS, EACH 50 X 35 CM 5 SHELVES 2 SHELVES, 120 X 35 CM 1 SHELF, 100 X 35 CM 1 SHELF, 205 X 25 CM 1 SHELF, 85 X 30 CM 3 X LOCKABLE TOOL BOXES 4 X TOOL BOXES PULL-OUT VICE----* BLUETOOTH HANDS-FREE SYSTEM * APPLE CARPLAY * ANDROID AUTO * VOICE CONTROL * 2 X USB-C * ON-BOARD COMPUTER * 2 X ARMREST DRIVER'S SEAT * ELECTRIC WINDOWS * ELECTRIC AND HEATED DOOR MIRRORS * CABIN PARTITION * 3 SEATS * 12V SOCKET * STORAGE COMPARTMENT * LED CABIN+CARGO AREA ----SPECIAL EQUIPMENT: * Audio-navigation system Discover Media Streaming & Internet (touchscreen, USB) * Equipment package: Light + Sight * Equipment package: Comfort Package Plus * On-board tools and jack * Driving Assistance System: Parking assist front and rear * Driving Assistance System: Area monitoring system (Front Assist) with city emergency braking function * Suspension and damping reinforced * Vehicle without child safety lock in the cargo/passenger compartment * Speed control system (cruise control) incl. speed limiter * Tailgate with glazing * Heated rear window with wiper system * Paint: Metallic paint * Cargo area partition, high, with fixed window * Truck registration * Multifunction display Plus * Tire pressure indicator * Rearview camera * "Transporter" lettering on the fender Fedpfxjyupzxj Aatspl * Seats in the cabin: double co-driver seat with storage compartment (lockable) in the seat box * Lashing eyes reinforced * Winter package Additional equipment: * Airbag, co-driver's side, can be deactivated * Airbag driver/co-driver side * Anti-slip regulation (ASR) * Exterior mirrors, elect. adjustable and heated * Exterior mirror, convex, left * Exterior mirror, convex, right * Floor covering in the cab: Rubber * Driving Assistance System: Brake assistant (HBA) * Driving Assistance System: Multi-collision brake * Driving Assistance System: Crosswind assist * Windshield laminated glass * Remote control (2) folding * Glove box, lockable * Engine 2.0 Ltr. - 81 kW TDI * Fog light * Non-smoker package * Radio reception digital (DAB+) * Wheelbase 3000 mm * Low emission according to emission standard Euro 6d-TEMP * Sliding door, cargo/passenger compartment, right * Power steering, electro-mechanical * Steel rims 6.5x16 * Start/stop system engine * Warning system for safety belt (driver's side) * Heat-insulating glazing * Central locking with remote control and interior actuation * Permissible total weight 2.80 t ----++ Exclusive

Condition: good (used), mileage: 8,94,484 km, power: 235 kW (319.51 HP), first registration: 02/2018, fuel type: diesel, tire size: 385/55R22,5, axle configuration: 4x2, wheelbase: 3,700 mm, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 5,780 mm, total width: 2,550 mm, total height: 4,030 mm, Year of construction: 2018, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, parking heater, power mirror, seat heater, traction control, = Additional Options and Accessories = - Heated mirrors - Digital tachograph - Trip recorder (control unit) - Fixed - Halogen lamp - Manual Fjdpfx Aaszur S Setepl - Radio/cassette - Sleeper cab - Lane keeping assist - Fabric - Blind spot sensor = Notes = Number of axles: 2, Configuration: 4x2, Payload: 11810 kg, Tare weight: 7190 kg, Gross vehicle weight: 19000 kg, Total fuel tank capacity: 390 liters, Height of fifth wheel coupling: 115 cm, Fifth wheel coupling: Fixed, Number of locks: 1, Winch pulling capacity: 403 tons, Suspension type: Air suspension, Type of cab: Sleeper cab, Cruise control, Trip recorder (control unit), Digital tachograph, Air conditioning, Number of airbags: 1, Auxiliary heater, Electric windows, Electric mirrors, Radio/cassette, Color: Multi-colored, Heated mirrors, Type of lighting: Halogen lamp, Lane keeping assist, Air conditioning, Seat heating, Bluetooth, Blind spot sensor, Engine power: 235 kW (315 hp), Fuel: Diesel, Euro: 6, Transmission type: Telligent, Transmission type: Mercedes Benz, Gears: 12, Power steering, ABS, ASR, Central locking, Number of seats: 2, Seat arrangement: 1+1, Seat upholstery: Fabric, Seat adjustment: Manual = Additional Information = Transmission Transmission: MB, 12 gears, Automatic Axle configuration Brakes: Disc brakes Axle 1: Tire size: 385/55R22.5; Steered; Tire tread depth left: 5 mm; Tire tread depth right: 5 mm; Suspension: Leaf spring suspension Axle 2: Tire size: 315/70R22.5; Dual tires; Tire tread depth left inner: 6 mm; Tire tread depth left outer: 7 mm; Tire tread depth right inner: 7 mm; Tire tread depth right outer: 5 mm; Suspension: Air suspension Weights Tare weight: 7,190 kg Payload: 11,810 kg GVW: 19,000 kg Interior Number of seats: 2 Maintenance APK (Periodic Vehicle Inspection): valid until 02.2027 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Identification License plate: 56-BKK-2 = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractors, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? It's simple! • Large, rapidly changing stock • Recognizable quality • A good price • Fair business practices • We speak many languages • We understand our customers • Support with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Inquire directly about our European warranty package.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Industrial self-cleaning disc filtration system manufactured by CHEMIPOL. The unit was installed as part of a reverse osmosis water treatment plant and was used for water pre-filtration. The system is equipped with eight TW-type disc filter units operating in parallel. Automatic cleaning is controlled by a Siemens PLC with an HMI operator panel. TECHNICAL DATA Manufacturer: CHEMIPOL Model: TW8P2L3 Equipment type: Self-cleaning disc filtration system Number of filter units: 8 Filter type: TW disc filters Configuration: Parallel operation Cleaning system: Automatic self-cleaning Pressure monitoring: Two pressure sensors measuring inlet and outlet pressure Control system: Siemens PLC Operator interface: HMI touchscreen Fjdpfxjzvlm Ee Aatjpl Application: Water treatment and reverse osmosis pre-filtration

Condition: used, Year of construction: 2017, Year: 2017 Condition: Very good – the machine has been refurbished, with reconditioned folding rollers and a new delivery unit. Configuration: - Vacuum pile feeder - 4 folding plates - Reconditioned folding rollers - Manual folding plate adjustment - Manual roller adjustment - New stream delivery unit Technical specifications: - Paper size: A3 Fsdezzx U Tjpfx Aatepl - Feeding system: Pile feeder - Delivery: Mechanical stream delivery - Number of folds: 4 parallel folds - Minimum sheet size: 90 × 120 mm - Maximum sheet size: 350 × 500 mm - Paper weight: 60–240 gsm - Fold length – Plate 1: min. 40 mm / max. 423 mm - Fold length – Plate 2: min. 40 mm / max. 228 mm - Special fold length: min. 18 mm - Production speed: up to 30,000 A4 sheets/hour

Condition: good (used), mileage: 8,83,130 km, power: 235 kW (319.51 HP), first registration: 01/2018, fuel type: diesel, tire size: 385/55R22,5, axle configuration: 4x2, wheelbase: 3,700 mm, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 5,950 mm, total width: 2,550 mm, total height: 4,010 mm, Year of construction: 2018, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, parking heater, power mirror, seat heater, traction control, = Additional Options and Accessories = - Heated mirrors - Digital tachograph - Trip recorder (control unit) - Fixed - Halogen lamp - Manual - Radio/cassette - Sleeper cab - Lane keeping assist - Fabric - Blind spot sensor = Notes = Number of axles: 2, Configuration: 4x2, Payload: 11810 kg, Tare weight: 7190 kg, Gross weight: 19000 kg, Total tank capacity: 390 liters, Fifth wheel height: 115 cm, Fifth wheel: Fixed, Number of locks: 1, Winch pull: 401 tons, Suspension type: Air suspension, Type of cab: Sleeper cab, Cruise control, Trip recorder (control unit), Digital tachograph, Air conditioning, Number of airbags: 1, Auxiliary heater, Electric windows, Electric mirrors, Radio/cassette, Color: Multi-colored, Heated mirrors, Lighting type: Halogen lamp, Lane keeping assist, Climate control, Seat heating, Bluetooth, Blind spot sensor, Engine power: 235 kW (315 Hp), Fuel: Diesel, Euro: 6, Transmission type: Telligent, Transmission type: Mercedes Benz, Gears: 12, Power steering, ABS, ASR, Central locking, Seats: 2, Seat arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual = Additional Information = Transmission Gearbox: MB, 12 gears, Automatic Axle Configuration Brakes: Disc brakes Axle 1: Tire size: 385/55R22.5; Steered; Tire tread depth left: 10 mm; Tire tread depth right: 10 mm; Suspension: Leaf spring suspension Axle 2: Tire size: 315/70R22.5; Double tires; Tire tread depth left inner: 7 mm; Tire tread depth left outer: 5 mm; Tire tread depth right inner: 5 mm; Tire tread depth right outer: 4 mm; Suspension: Air suspension Weights Tare weight: 7,190 kg Payload: 11,810 kg GVWR: 19,000 kg Interior Number of seats: 2 Maintenance APK (Periodic Vehicle Inspection): valid until 01.2027 Condition Technical condition: good Fpedoztv Twepfx Aatsl Optical condition: good Damage: none Number of keys: 2 Identification License plate: 62-BKG-5 = Company Information = Kleyn Trucks is one of the largest independent used vehicle dealerships in the world. Here you can choose from a constantly changing stock of 1200 used trucks, tractors, and trailers. Our range includes all European brands from different years of manufacture and price ranges. Why buy from Kleyn Trucks? It's simple! • Large, rapidly changing stock • Recognizable quality • A good price • Correct business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration can be arranged quickly • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Calculate your lease rate quickly and submit an inquiry via our website. Ask directly about our European warranty package.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, We offer you: Manufacturer: INDEX Type: MS40-6 C Year of construction: 2019 Control: Index control C200-SL, MS40C Double-NCU Technical data: Working spindles: Number: 6 pcs. Spindle bore: max. 40 mm Max. speed: 7,000 rpm Power (100% / 25%): 13 / 24 kW Torque (100% / 25%): 31 / 57 Nm Synchronous spindle: Number: 1 pc. Spindle bore: 40 mm Max. speed: 8,000 rpm Power (100% / 25%): 10 / 14 kW Torque (100% / 25%): 16 / 22 Nm Slide travel z: 150 mm Number of tools for back-end machining: 3 pcs. Swiveling range b: 144 ° Tool holder: Number: 12 pcs. Slide travel x: 73 mm Slide travel z: 120 mm Tool holder, cut-off and back-boring slide: Number: 1 pc. Slide travel x: 82 mm Number of tools for back-end machining: 3 pcs. Electrical connection data: Rated power: 85 kW Connection power: 101 kVA Rated current: 145 A Max. pre-fuse: 160 A Note: Mains voltage: 400V Note: Electrical frequency 50 Hz Technical features & accessories: - Double-NCU Fjdpfszlutmsx Aatjpl - Signal light 'Smartlight' with LED - Machine designed for connection to a TN network. - Coolant: Cutting oil - NC option Synchronous spindle / Multi-sided turning incl. electronic shaft - INDEX loading magazine MBL40-6/3300/Strip loader/50Hz: - Strip loader 50Hz - for bar diameter D13 - D40 - Bar length 3300 mm - with pilot drilling unit - Material storage with 700 mm support area - Profibus-DP-Master interface. - 1 set (6 pieces) reducing sleeves manufactured for bar or corner dimensions, diameter D = * mm, Inner diameter range D14 - D41 - 1 set (6 pieces) material sliders for material diameter D24mm - D32mm, consisting of: - 6 material sliders D23 - 6 rotating sleeves D23 - 1 set (6 pieces) internal clamping sleeves D23mm - for material diameter D24mm - D32mm - pilot drilling diameter D15mm - 1 set (6 pieces) external stops D23mm - for material diameter D24mm - D32mm - pre-machined - 1 set (12 pieces) reducing sleeves for material sliders. The outer diameter of the reducing sleeves corresponds to the material diameter (D13 - D40) - 1 set (6 pieces) adapter sleeves, inner diameter range D13.5 - D40.5. The inner diameter of the adapter sleeves should be bar diameter + 0.5mm. - 1 set (6 pieces) two-part guide intermediate tubes, diameter 29 mm - Assembly aid for the sleeves of the guide intermediate tubes - UNIMAG - Interface for connecting a bar loader - Part discharge via slide into spindle position 6 - Workpiece conveyor belt in spindle position 6, machine-integrated - Hainbuch TOPlus Axfix D40 for synchronous spindle - Multi-sided and thread milling device - Reduction ratio i=5:1 - Inductive encoder for reference query - Internal oil lubrication - INDEX short taper connection - without converter - Back-end machining device on slide position 6.2 for max. three boring positions for fixed tools FURTHER INFORMATION IN THE PICTURES Accessories, tools and clamping devices shown are only included in the scope of delivery if this is stated in the additional information. Changes and errors in the technical data and information, as well as prior sale, are reserved!

Condition: used, Year of construction: 1998, functionality: fully functional, For sale: Coil metal decoiling, slitting, and recoiling line Condition: used, connected – available for live demonstration. Designed for coil metal decoiling, precise slitting into narrower strips, and recoiling into smaller coils. Technical specifications: Year of manufacture: 1998 Fodpfxexlcp Ns Aatjpl Made in: Poland Max. metal width: 1250 mm Knife pairs: 5 Longitudinal slitting, steel: min 0.4 mm / max 1.2 mm Film application function Scrap cutting guillotine Line includes: Decoiler 5 T Recoiler 5 T Multi-knife disc shears Braking and separating segment Turnstile with separator Control panel Purpose: The line is intended for preparation of coil metal for further processing: decoiling, precise longitudinal slitting, recoiling into smaller coils. If you have further questions – we will be happy to assist you.

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT21801011727, empty load weight: 3,200 kg, maximum load weight: 14,800 kg, overall weight: 18,000 kg, axle configuration: 3 axles, first registration: 01/2022, total length: 10,020 mm, total width: 2,550 mm, total height: 1,070 mm, suspension: air, tire size: 445/45 R19,5", color: silver, Tandem swap body trailer type TWP 180 Mega-EL Caution: images are stock/archive photos. The vehicle may be in use. #Weights and dimensions - Gross vehicle weight: 18000 kg - Payload approx.: 14800 kg - Kingpin/support load: 1000 kg - Unladen weight (base version) only approx.: 3200 kg +/- production tolerance - Overall length with 7820 mm swap body approx.: 10020 mm - Overall width max.: 2550 mm - Frame height lowered approx.: 1010 mm - Frame height raised approx.: 1390 mm - Frame height in driving position approx.: 1070 mm - Parking height approx.: 1040 to 1320 mm - Standard stop to front locking unit approx.: 985 mm - Locking unit spacing: 5853 mm - Coupling eye height approx.: 380 mm - Drawbar length set from stop, 7820 mm swap body, approx.: 2200 mm - Parking heights apply on level ground #Chassis - swap body centre-axle trailer - Fine-grain steel welded construction - Front stop, longitudinally adjustable and foldable - 2 pairs of removable guide rollers, front and rear - 4 twistlocks with reinforced brackets on 20" base for swap bodies 7.15 / 7.45 and 7.82 - 1 pair geared landing legs front, straight foot, one-side operation on RHS - 1 pair geared landing legs rear, straight foot, one-side operation on RHS - 2 wheel chocks with holder Fpsdpfx Aajzwlcietsl - Aluminium side underrun protection - Steel rear underrun protection - Half-shell mudguards - Mudflaps #Coupling assembly - centre-axle trailer - Drawbar with certified 50 mm coupling eye, haulage version (not suitable for trucks with tail lift) - Underslung drawbar coupling, free drawbar length approx. 2200 mm - Brake/electrical connection plate on drawbar, all lines to towing vehicle as coiled cables #Axles and suspension - SAF disc brake axles - Laser-aligned axles/chassis, reducing tyre wear and fuel consumption - Air suspension #Braking system - 2-line air braking system - Colour-coded line routing for easy servicing - Air reservoir capacity 208 litres - Spring-loaded parking brake - 2 mismatch-proof coupling heads front, with lines to towing vehicle, RHS connection - EBS electronic braking system with EBS connector front, with cable, RHS connection - Caution: only to be towed by vehicles with effective ABS - Raise-and-lower valve with hold function in lowered/raised position #Wheels and tyres - 445/45 R19.5" make of manufacturer's choice - Steel rims, factory silver #Electrics - 24V multi-chamber lights, yellow LED side marker lights - 2 white front position lights - 2 white/red rear outline marker lights - 2 x 7-pin mismatch-proof connectors front, with cable, RHS connection - 2 additional LED work lights, flush-mounted at rear, activated via reverse light #Country of registration / plates - Germany - Dekra inspection and certificate per §13 EC-FGV - 24/7 service hotline - prepared for single-line number plate holder - Contour marking with reflective tape to ECE R048, white sides, red rear #Paintwork - Frame hot-dip galvanised incl. passivation, 15-year warranty against corrosion perforation Caution: stock photos!

Condition: used, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 12/2020, Equipment: ABS, FFB semi-trailer with silo, model EUT 60.3-4/4, for the transport of feed, approx. 60,000 liters volume, 4-chamber aluminum design. Rated for a trailer total weight of 34,000 kg: 10 tons saddle pressure, 24 tons axle load technically permissible, 13 tons saddle pressure, 27 tons axle load (3 x 9 tons). Unladen saddle height 1250 mm. Container design: Container with 4 chambers, approx. 8,000 / 19,000 / 17,000 / 16,000 liters volume. Pressure equalization via elongated holes in the partition walls. 4 material discharge cones with special FFB material discharge bowls, DN 800 / DN 1000. Fluidization via special fluidization valve, manufacturer OLI. Operating parameters: The pressure vessel complies with the EC Pressure Equipment Directive. Operating pressure 2 bar, test overpressure 3 bar. Wall thickness approx. 5 mm. Operating temperature -40 to 80°C. 5 manholes DN 450 with pivoting and folding dome covers. Material discharge: For each material discharge cone, a central material sump with a diameter of 200 mm. The sumps are equipped with bottom flaps DN 200 with an aluminum housing, steel plate and stainless steel shaft, NBR seal (white), which are operated laterally via remote controls. A 4" material collection line made of special steel is collected on the left side on the operating side in front of the axle unit. Chamber 1 and 2 collected in front of the axle unit and chamber 3 and 4 collected behind the axle unit. At the end of each material line, a 4" annular nozzle is installed for material acceleration. A 4" sight glass is installed behind each annular nozzle. Material discharge via one 4" TW coupling with a blank cover. Agitation nozzles in the sumps. Air piping: An aluminum air collection line is mounted on the left side on the operating side and runs to the rear with a Storz B coupling. Ladder and walkway: One stainless steel access ladder on the front and one on the rear, left side. Aluminum safety walkway on the left. Brake lock when the safety guardrail is raised. Chassis: The saddle plate is equipped with a tested 2" kingpin. Suspension: Axle unit, manufacturer SAF, type INTRADISC PLUS II INTEGRAL, 3 x 9 tons, disc brakes ø 430 mm. The air-sprung axle unit is mounted in FFB aluminum suspension. Axle spacing 2 x 1310 mm. First axle as a lift axle, controllable from the driver's cab, with starting aid. Third axle as a trailing steering axle, lockable via reverse gear and additionally via a switch on the control panel. Braking system: 2-sensor 2-module SLV ABS/EBS pneumatic braking system equipped with a spring-loaded parking brake on two axles. RSS - Rollover Stability Support. Air suspension system: Air-sprung suspension with automatic height adjustment. Lifting and lowering valve mounted laterally on a control panel in front of the first axle. Tires: 6 tires, size 385/65 R22.5, are installed. Rims: Forged aluminum rims, manufacturer Alcoa, type Dura Bright EVO, size 22.5 x 11.75. Offset: 120 mm. Wheel bolt holes: 26 mm. Wheel cover: Single-wheel plastic mudguards, black, attached with stainless steel brackets. Mud flaps mounted on the rear mudguards. Electrical system: 24-volt electrical system consisting of: - a 15-pole socket mounted in front of the saddle plate. - two multi-chamber lights integrated into the rear underrun protection. - yellow side marker lights. - outline lights at the rear. - license plate lights at the rear. - 4 work lights, 2 x left at the discharge (switched via parking lights and additionally via a sw Fpedpfxezr A R Hs Aatel

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 41015, Technical Characteristics: Work Area • Chuck diameter: 210 mm • Maximum workpiece diameter/height: 200/200 mm • X1/X2 axis stroke (working stroke): 160 mm / Rapid traverse in X: 24 m/min • Z1/Z2 axis stroke: 250 mm / Rapid traverse in Z: 30 m/min Main Spindle • Spindle configuration: 4 spindles (twin machining + twin loading) / A2-6 size • Distance between spindles: 282.5 mm • Maximum speed: 4500 rpm • Power: 18.5 kW Turret with Driven Tools • Turret configuration: 2 turrets • Number of positions: 2 x 10 • Maximum speed: 4000 rpm / Power: 3.7 kW Electrical Equipment • Operating voltage: 400 - 480 V, 120 A • Connected load: 66 kVA Fedpfx Aaexwmcwjtopl Dimensions • Total dimensions: Length = 3336 mm (with chip conveyor), Width = 2400 mm, Height = 1760 mm • Weight: 7000 kg Main Features and Capabilities: • CNC Control: FANUC 0i-TF Plus • Main spindle: High power and wide speed range • Driven tools: Capability for milling and drilling operations • Chip conveyor • Fully enclosed work area • Chip extractor • Cooling system for electrical panel • Lubrication system • Hydraulic oil cooling unit • Automation interface for robot integration installed • Documentation: Available in electronic and printed formats Machine Condition: • Status: Operational

Condition: used, empty load weight: 9,750 kg, maximum load weight: 28,250 kg, overall weight: 38,000 kg, first registration: 02/2019, loading space length: 13,400 mm, loading space width: 2,470 mm, loading space height: 2,660 mm, loading space volume: 88 m³, suspension: air, tire size: 385/65R22,5, color: white, gearing type: other, front tire size: 385/65R22,5, rear tire size: 385/65R22,5, driver cabin: other, emission class: none, Equipment: ABS, cooling unit, tail-lift, Lamberet cryogenic semi-trailer - Carrier Vector 1950Mt. - Refrigeration unit: Carrier Vector 1950Mt. - Bi-Multi-Temp. - Dimensions (LxWxH): 13.40 x 2.47 x 2.66m. - Disc brake - Partition wall - Tail lift - Aluminum floor - Electrical system - BPW axles - Temperature recorder - FRC/ATP tires: 385/65R22,5 Very good condition, export price! Yourtrucks Group The Yourtrucks Group maintains business relationships worldwide. Both purchasing and sales extend beyond national borders; therefore, our listings generally include the export price, as this is independent of the intended location of use. Yourtrucks GmbH compiles the content of this website with the utmost care and ensures that it is regularly updated. This information is intended as non-binding general information and does not replace detailed individual advice when making a purchase decision. Only the provisions contained in the purchase contract are decisive. Subject to change, errors, typos, and prior sale. Our general terms and conditions apply exclusively. Languages - We speak English - On parle français - Мы говорим по-русски Fedszk Nh Ajpfx Aatjpl - Mówimy po polsku - Hablamos español - Falamos português - Parliamo italiano