Used Fischer De2754K045Bp00Mw for sale (227)

Condition: used, functionality: fully functional, machine/vehicle number: H2127H00..., Year of construction: 2017, operating hours: 5,649 h, load capacity: 8,000 kg, lifting height: 3,050 mm, free lift: 150 mm, fuel type: electric, mast type: duplex, construction height: 2,900 mm, fork length: 1,800 mm, empty load weight: 15,500 kg, drive type: Elektro, Electric 4-wheel forklift Chassis number: H2127H00... Load center: 900 mm ISO class: ISO Class 4 = 5,000 - 10,000 kg Mast type: Duplex Condition: Ready for use and fully operational Technical condition: Good Front tire type: Superelastic Front tire condition: 80 - 100% Itedpfx Aajy Hmy Dohoi Rear tire type: Superelastic Rear tire condition: 80 - 100% Battery voltage: 80V Battery capacity: 1240Ah Battery type: PzS Battery year: 2023 Battery condition: 80 - 100% Sideshift, fork positioner, third valve, fourth valve, rear work light, front work light, heater, full cabin, joystick, windscreen wiper,

Condition: used, functionality: fully functional, machine/vehicle number: H2X392H01763, Year of construction: 2017, operating hours: 4,500 h, load capacity: 2,500 kg, lifting height: 4,715 mm, free lift: 1,511 mm, fuel type: gas, mast type: triplex, construction height: 2,154 mm, drive type: Treibgas, LPG Forklift VIN: H2X392H01763 Load Center: 500 ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast Type: Triplex Condition: Ready for use and fully functional Technical Condition: Good Front Tires Type: Solid Rubber Front Tires Condition: 40 - 60% Rear Tires Type: Solid Rubber Rear Tires Condition: 40 - 60% Sideshift, 3rd Valve, 4th Valve Itodsv Ufzdjpfx Aahji

Condition: used, functionality: fully functional, machine/vehicle number: H21202Y062.., Year of construction: 2021, operating hours: 1,750 h, load capacity: 2,500 kg, lifting height: 5,060 mm, free lift: 1,595 mm, fuel type: diesel, mast type: triplex, construction height: 2,285 mm, fork length: 1,200 mm, drive type: Diesel, Diesel Forklift VIN: H21202Y062.. Load Center: 500 ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast Type: Triplex Condition: Ready for use and fully functional Technical Condition: Very good Front Tires Type: Super Elastic Front Tires Condition: 80 - 100% Rear Tires Type: Super Elastic Rear Tires Condition: 80 - 100% Iodpfx Aewiavkeahjti Sideshift, Fork Positioner, 3rd Valve, 4th Valve, Rear Work Lights, Front Work Lights, Heating, Full Cab, Dual Pedals, USB Port.

Condition: used, functionality: fully functional, machine/vehicle number: H2X393G015.., Year of construction: 2016, operating hours: 5,150 h, load capacity: 3,500 kg, lifting height: 4,650 mm, free lift: 1,450 mm, fuel type: gas, mast type: triplex, construction height: 2,200 mm, empty load weight: 5,340 kg, drive type: Treibgas, LPG Forklift Chassis number: H2X393G015.. Load center: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Itodpfx Ajy Hmywsahji Condition: Ready for operation and fully functional Technical condition: very good Front tire type: Solid rubber Front tire condition: New Rear tire type: Solid rubber Rear tire condition: New Sideshift, fork positioner, 3rd valve, 4th valve,

Condition: used, functionality: fully functional, machine/vehicle number: H2X393V01345, Year of construction: 2019, operating hours: 4,760 h, load capacity: 3,000 kg, lifting height: 5,500 mm, free lift: 1,600 mm, fuel type: gas, mast type: triplex, construction height: 2,460 mm, fork carriage width: 1,150 mm, fork length: 1,200 mm, drive type: Treibgas, LPG forklift truck Itsdpfxey Hmyks Aahoi Chassis number: H2X393V01345 Load centre: 500 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Very good Front tyre type: Solid rubber Front tyre condition: 80 - 100% Rear tyre type: Solid rubber Rear tyre condition: 80 - 100% Sideshift, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heating, road approval (STVZO), full cabin,

Condition: used, Year of construction: 2010, operating hours: 942 h, functionality: fully functional, machine/vehicle number: 103BS00103/00, fuel type: gas, empty load weight: 1,290 kg, drive type: Treibgas, sweeping width: 1,000 mm, Sweeper-suction machine Chassis number: 103BS00103/00 Itsdpoy Hmx Hjfx Aahei Condition: Ready for operation and fully functional Technical condition: normal

Condition: used, functionality: fully functional, machine/vehicle number: K005A03827Y, Year of construction: 2014, operating hours: 7,825 h, load capacity: 5,500 kg, lifting height: 4,100 mm, fuel type: gas, mast type: duplex, fork length: 2,400 mm, drive type: Treibgas, LPG forklift truck Chassis number: K005A03827Y Load centre: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Duplex Condition: Limited operational readiness Technical condition: normal Itsdpfx Aaoy Hmxmshoi Front tyres type: solid rubber Front tyres condition: 60 - 80% Rear tyres type: solid rubber Rear tyres condition: 40 - 60% Description: V6 GM engine, 3rd valve, rear work lights, front work lights, heater, full cab,

Condition: good (used), overall weight: 160 kg, The BookMaster brochure-making machine and the TrimMaster front cutter combine maximum performance with cost-effectiveness. They are easy to operate and require minimal maintenance, making them the most advanced, user-friendly, and reliable saddle-stitch brochure-making machines on the market. The BookMaster features a unique stitching mechanism that ensures virtually maintenance-free operation. The most important wear parts are contained in the stitching head cassette and are replaced every 5,000 cycles during cassette changes. This allows for over one million cycles before servicing of the stitching head is required. The BookMaster has a manual adjustment feature for adapting page margins, end sheets, and stitching/folding positions. The TrimMaster cutting unit has a single, self-sharpening blade made of hardened steel for clean trimming of the book's front edge. All cutting waste is transported outside the machine to an external waste container, which allows for continuous operation. The finished brochures are transported to a high-performance discharge conveyor. Additional information: Itjdjy Idr Hopfx Aahsi Max sheet format: 482 x 320 mm Min sheet format: 210 x 140 mm Max brochure thickness: 22 sheets Max cutting length: 25 mm 230 volts. Shipping possible, pickup possible, test run possible. Operating manual is also included.

Condition: used, functionality: fully functional, machine/vehicle number: FN503832, Year of construction: 2016, operating hours: 1,974 h, load capacity: 8,000 kg, lifting height: 4,500 mm, free lift: 1,500 mm, fuel type: gas, mast type: triplex, fork length: 2,400 mm, drive type: Treibgas, Heavy-duty forklift truck – LPG Itedpswzdrajfx Aahsi Chassis number: FN503832 Load centre: 500 mm Mast type: Triplex Condition: Ready for use and fully operational Technical condition: Very good Front tyres type: Solid rubber Front tyres condition: 80–100% Rear tyres type: Solid rubber Rear tyres condition: 80–100% Sideshift, fork positioner, 3rd valve, 4th valve, rear work lights, front work lights, heater, full cabin, full free lift, Tyres: white, non-marking

Condition: good (used), functionality: fully functional, Year of construction: 2005, operating hours: 2,818 h, load capacity: 2,500 kg, lifting height: 3,290 mm, load center: 500 mm, fuel type: gas, mast type: duplex, construction height: 2,300 mm, power: 38 kW (51.67 HP), motor manufacturer: Mazda, gearing type: automatic, fork length: 120 mm, tire condition: 75 %, empty load weight: 4,040 kg, immediately ready for use with sideshift, overhauled gas system, new lighting, new UVV and gas inspection, new seat cushion, SE tyres Itjdpfx Aey Afr Doahji

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, center height: 150 mm, total length: 620 mm, Mechanics: All wear parts of the machine are replaced, including the infeed spindle in the X-axis. All assemblies are restored to as-new condition. After the overhaul, the machine is comparable to a new machine. Geometry: The machine is completely dismantled down to the guides. Before the geometry of the individual tables and assemblies can be restored, both guides of the X and Z axes are scraped by hand and restored to as-new condition. After completion, the machine receives a measurement report in accordance with the manufacturer's specifications. Painting: Once the geometry of the machine has been restored, it is prepared for repainting. All housings, tables and the machine bed are stripped of old paint, cleaned and repainted. Hydraulics: The entire lubrication system, including the lubrication unit, is replaced. The hydraulic unit is also completely overhauled. Conventional internal cylindrical grinding machine TSCHUDIN HTG 610I Equipment of the machine: Itjdpfourw Uysx Aahei Technical data: Center height: 150 mm Center width: 680 mm Grinding length: 620 mm Weight and space requirement of the machine: 2500kg // 2340x1445x1900 mm Machine equipment (standard): 1 pc. Workpiece headstock MK5 1 pc. Control panel 1 pc. Holder for internal grinding spindle 1 pc. Speed control unit for belt spindle (UJ50 / UJ80) FISCHER 1 pc. Hydraulic unit Optional: - Digital measuring system 2-axis - Freely adjustable speed (1-800 rpm) incl. soft start (higher speeds are optionally possible after clarification of technical details) - Separate low speed for part alignment

Condition: new, Year of construction: 2024, functionality: fully functional, Universal CNC cylindrical grinding machine for high-precision internal & external cylindrical grinding MBF 453U from the MaiBase platform The machine is a completely new development with strong dimensions in a small space! Technical data: Center width: 430 mm Standard center height: 200 mm Grinding length: 400 mm Grinding wheel diameter: 500 mm Z-axis adjustment path: 550 mm X-axis travel: 385 mm Dimensions and weight: 2200 x 2500 x 2400 mm // 6500 kg Equipment of the machine: - FANUC Oi-F Plus control system - Grinding headstock (swiveling) with 15kW motor spindle - Workpiece headstock MK5 - Tailstock MK3 with 20 mm stroke (optional 60 mm / 120 mm) - Handwheel for manual axis movement - Z-axis - X-axis - C-axis - B-axis - Glass scales for X- and Z-axis - Internal grinding spindle FISCHER UJ80 Isdpetrf Smsfx Aahjti - Internal grinding spindle (GMN motor spindle) optional - Dressing spindle attached to the workpiece headstock for rotary dressing - Automatic door drive

Condition: used, Year of construction: 2004, x-travel 3000 mm y-travel 3400 mm z-travel 950 mm surface area 2500x1600 mm no. of tables 2 control NUM Tool changer 12 Pos turning speeds 4,5-40.000 U/min spindle taper: HSK 40 Itodpfx Aoyqv Eijahoi spindle drive 6 kW Table load 850 kg Machine No.: 2259 B +/- 110° C 360° Table size: 6000 mm x 2500 mm (hole pattern 22H7 / M16) Spindle: Manufacturer Fischer, 2 pieces (type MFWS 1709/30 Serial number: 10015020 / 133227) Milling head: Forest Line type: fork head / B-axis +/- 110° swivel / C-axis 360° (infinite) rotation / Station for milling head storage (2 pieces) Chip conveyor: Scraper conveyor / Manufacturer: Richter Tool measurement: Blum Feed: X + Y 30,000 m/min / Z 28,000 m/min Rapid traverse: equals feed rate The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Year of construction: 2001, functionality: fully functional, Portal machining center for HSC milling The machine works in a Röders RCM automation system. It can therefore be integrated into an automated production system. Technical data - Travel ranges: X 800 mm, Y 600 mm, Z 400 mm - Drive power: 17 kW - Speed: 36,000 rpm - Fischer motor spindle - Spindle mount: HSK E50 - Feed rate: up to 60 m/min. Work table - Dimensions 900 mm x 700 mm - Max. workpiece weight 800 kg Control - Röders HSC RMS6, including software for: milling simulation and for cutting out machining - Electronic hand control panel and mouse - Ethernet interface integrated in Windows NT - Remote maintenance of the RSM 6 machine control Machine structure - Portal version with temperature stabilization of the machine frame Tool changer - 30 stations with collision monitoring Equipment Itodpsvri Nmsfx Aahei - Cooling unit for milling spindle - Infrared measuring probe for automatic: tool length correction, diameter measurement and tool breakage monitoring - Microjet spray cooling and lubricator - Fixed bearings and spindle nuts water-cooled - Fully protected cabin (crane loading possible) - Connection for the work area extraction - 2 pcs. Screw chip conveyor - Workpiece cleaning via separate air nozzles Machine data - Space requirement (without service areas!) LxWxH approx. 3,100 mm x 3,000 mm x 3,200 mm - Weight approx. 13,000 kg - Connected load 400V, 50/60 Hz, 3 phases The machining center is in good condition. Maintenance and repair work was carried out regularly. A viewing with power and chips is possible by appointment. All tools and operating materials shown in the photos are not included in the scope of delivery of the machine. Technical changes and errors reserved.

Condition: good (used), functionality: fully functional, total width: 500 mm, total length: 7,000 mm, plate height: 600 mm, Granite measuring beam from Johannes Fischer Aschaffenburg Dimensions: 7000x500x600 mm Milled recess in the upper running surface Drill holes on the top Itjdpfoym R U Rsx Aahji Quality grade is still being verified (likely better than grade 0 according to DIN876) Optional additional machining available at extra cost

Condition: like new (used), functionality: fully functional, total width: 1,000 mm, total length: 4,000 mm, plate height: 400 mm, Granite surface plate by Hahn & Kolb (Johannes Fischer Aschaffenburg) Dimensions: 4000x1000x400 mm Surface will be newly finished to grade 00 (or as requested) Optional stand or supporting legs available. Iodpfsym R Tmsx Aahjti

Condition: used, functionality: fully functional, Hard stone angle from Johannes Fischer Aschaffenburg in laboratory quality, 350x300x60mm Iodpeq Tdh Nofx Aahjti Perpendicularity < 2µm (1") Flatness of the measuring surfaces < 1µm Slight damage to the corners, measuring surfaces are in order Measurement report on request for an additional charge

Condition: used, Year of construction: 1992, functionality: fully functional, Hard stone angle from Johannes Fischer Aschaffenburg in laboratory quality, 350x300x60mm Perpendicularity < 2µm (1") Flatness of the measuring surfaces < 1µm Slightly damaged corners, measuring surfaces are in order Measurement report on request for an additional charge Isdpfx Aaoq Tdh Ejheti

Condition: like new (used), Year of construction: 2001, functionality: fully functional, Hard stone angle from Johannes Fischer Aschaffenburg in laboratory quality, 1000x275x100mm Squareness within 1µm! Includes Kunz vacuum slide and Mahr measuring probe. Measurement protocol available upon request for an additional charge. Itsdpfxsix Ahxe Aahsi

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 32461/2384, Manufacturing origin Swiss Voltage 380 / 50 / 3 Netweight 4900 lbs Dimensions 121 x 69 inches Iodpfed Amifjx Aaheti TECHNICAL DATA Nominal distance between centre 600 mm Max. distance between centres, headstock and tailstock projecting 750 mm Height of centres, standard 125 mm Height of centres by means of raising blocks for work head-and tailstock 175 =ᐳ 250 mm Max. swing diameter with 125 mm height of centres 250 mm Max. swing diameter with raising blocks 350 =ᐳ 500 mm Table swivels each side 10° Max. lenght for surface grinding (width=200 mm) 900 mm Table speed infinitely viable by hydraulic drive, approx. .. 6 m/min Dwell of table reversal 0 - 5 sec. Grinding wheel for cylinrical grinding (diameter x width x hole) 350/400x50x127mm Grinding wheel for surface grinding diameter x width x hole 250 x 13 x 76 Speeds of grinding wheel spindle 1500/1700/2200/3600 Grinding wheel head swivels 270° with indexed stop each 90° Vertical movement of grinding wheel head, height of centres -350 mm Cross movement of grinding wheel head 285 mm Rapid advance and withdrawal of wheelhead 40 mm Intermittent infeed per reversal of table 0,001-0,03 mm/dia Infeed for plunge grinding 0-0,9 mm/dia Micro-corrector of infeed, 1 division of dial 0,001 mm/dia Swivel of work headstock 360° work speeds infinetely viable, normal/special 20-400/10-400 Internal taper of headstock/tailstock 5/3 Morse Grinding wheel motor, approx. 4 HP errors and omissions excepted data given without obligation Inventory Nr.2170089, machine equipped with : 1 Workpiece headstock MT5 1 sinus rule without comparator 1 Wheel headstock with 4 pulleys 1 Tailstock MT3 1 Collet clamping device with drawbar and reduction sleeve B32 1 Internal grinding device with quill Fischer UJ50x250 – pulley Ø 48 for 14000 min-1 1 Pivoting wheel trueing-up device with sole 50 mm 1 Table’s pivoting stop without comparator 1 Cooling device through decantation 1 extractor 1 balancing stake

Condition: used, functionality: fully functional, machine/vehicle number: FN615268, Year of construction: 2020, operating hours: 2,469 h, load capacity: 2,000 kg, lifting height: 6,500 mm, free lift: 1,800 mm, fuel type: electric, mast type: triplex, fork length: 1,200 mm, drive type: Elektro, Electric 3-wheel forklift Chassis number: FN615268 Load centre: 500 mm ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: very good Front tyres type: Solid rubber Front tyres condition: 80 - 100% Rear tyres type: Solid rubber Rear tyres condition: 80 - 100% Ijdpfxow H Eiqe Aaheti Battery voltage: 48V Battery capacity: 750Ah Battery manufacturer: JH Battery type: PzS Battery year: 2023 Battery condition: 80 - 100% Side shifter, integrated lateral lift, front work lights, overhead guard, front windscreen, STVZO, full free lift,

Condition: used, Year of construction: 2003, internal diameter 99999 mm grinding depth 99999 mm swing diameter 99999 mm grinding diameter 99999 mm grinding length 200 mm centre height 175 mm CNC internal grinding machine B-axis 4 x 90° Q-axis for adjusting tapers Used with minor maintenance 2 HF internal grinding spindles: -Fischer MFM 1090 90,000 rpm -Fischer MFM 1242/60 42,000-60,000 rpm 1 external grinding motor spindle Fischer MFVS1407 7,000 rpm -Pneumatic power clamping device with 20mm stroke Iodouxft Sepfx Aaheti -Dressing device with 2 swivelling arms, hydraulically foldable back -Grinding detection ring sensor Dittel on the workpiece headstock -Passive grinding detection with magnetic base -Paper belt filter 375 l

Condition: used, Year of construction: 2002, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct drive - strongly recommended for non-circular grinding - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled B-axis with direct drive - center height 225 mm - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements - no stick-slip effect even at low speeds - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws - significant improvement in damping, resulting in better workpiece surface finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets New hydraulic unit - optimized temperature control (chiller) - Energy-saving Only one pump controlled by VFD - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) -fine adjustment +/- 150 microns Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion MECHANICAL OVERHAUL -complete machine according to Kellenberger protocoll -new painting ELECTRICAL OVERHAUL - new modern Fagor CNC with BEMA HMI - new electric cabinet - new digital drive technology - replacement of all electrical cables, switches etc. - new absolute external scales in x- and z-axis - new absolute encoder (B-axis) Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing - 2 dressing diamonds - 1 dressing blade - dressing roll - 3 flat dresser - corrections - Z-position measurement - GAP control Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Itedpfeuxfu Nox Aahsi Pr...

Condition: used, Year of construction: 2002, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm dimensions of the machine ca. 3,6/3,5 m Photos of identical machine with centre height 225mm Base: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding head UR with T1-T2-T3 Iedpfxsuxfucs Aaheti Basic equipment: -T1 500mm grinding disc diameter -T2 400mm grinding wheel diameter -Infinitely variable, high-resolution axis -Marposs measuring device for tool measurement -Active longitudinal positioning -GAP on T1 and T2 from ELASO contactless integrated in the control interface Semi-automatic balancing from ELASO integrated into the control interface -Tailstock with manual retraction -MK5 workpiece headstock with short taper DIN 55026 Belt-driven internal grinding device Options at an extra charge: - New high-precision workhead with torque drive - Internal grinding device for high-frequency spindles diameter 120mm -HF internal grinding spindle Fischer MFM-1224/42/31 D-21 -HF spindle with HSK holder 24,000 rpm with integrated GAP sensor. (delivery time) -CNC-controlled C-axis non-circular grinding -hydrostatic threaded spindle in x -new hydrostatic unit with only 1 pump and pressure accumulator thus better energy efficiency. -monitoring of the water content in the hydrostatic system -Suction system Further options available on request Mechanical overhaul: -Complete machine overhauled according to Kellenberger measurement protocol -New service-friendly cab -repainting Electrical overhaul: -New modern CNC CIRCULAR GRINDING MACHINE control with BEMA rough grinding surface -New control cabinet -New drive technology -Replacement of all electrical cables Berus pressure switches etc. -New absolute glass scales in x and z -New absolute rotary encoder (for B-axis) Control system: The grinding software consists of a basic licence and various options that are possible depending depending on the equipment of the machine. Basic software - External and internal pendulum grinding - External and internal plunge-cut grinding - External and internal pendulum grinding - External and internal plunge-cut grinding - External and internal taper pendulum grinding - External and internal radius grinding, radius dressed on disc - Semi-automatic pendulum grinding - Workpiece zeroing - Grinding wheel zeroing - Measuring the dressing diamonds - 2 moulding diamonds - 1 shaped diamond or dressing roll (dressing roll required) - Moulding roller (dressing roller required) - 3 Flat dresser - Corrections - Z-position measurement (probe required) - GAP probing (grinding device required) OPTIONS at an extra charge: Software profile plunge-cut grinding: - External and internal profile plunge-cut grinding with profile disc Profile grinding software: - External and internal profile grinding with straight disc Software thread grinding: - Single and multi-start external and internal thread grinding with thread on the disc disc Dressing. Dressing of single and multi-groove discs. Flank angle freely selectable. Trapezoidal thread grinding software: - Additional dressing of trapezoidal threads possible External and internal non-circular plunge-cut grinding: - External and internal non-circular plunge-cut grinding Non-circular grinding software: A prerequisite for non-circular grinding is that the workpiece axis is equipped with a high-resolution rotary encoder so th...

Condition: used, mileage: 6,80,000 km, power: 375 kW (509.86 HP), first registration: 05/2008, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, gearing type: mechanical, emission class: euro5, Equipment: air conditioning, * Mercedes-Benz 2651 Actros MP2 V8 Tractor Unit * First registration: 2008 * 680,000 km * Euro 5 * Telligent manual transmission with clutch * Tipping hydraulics * Leaf/air suspension * 6x4 axle configuration * Air conditioning * Retarder * Mega cab * Wheelbase: 3.30 m * Unladen weight: 9,575 kg * All injectors replaced! * Engine runs unevenly and smokes Itedpfx Aaoyq A Drehsi * Camshaft likely damaged Special equipment: Work lights on rear cab wall (top), audio system: Radio Truckline CC 65 / 70 with cassette deck, 220 Ah battery, comfort cockpit, air horn, movable cab entrance, rear axle H 7, 13 t, crown wheel 300, reinforced clutch, mounting plate / fifth wheel plate 40 mm for fifth wheel coupling, auxiliary drive MB 2C, Voith retarder, low-maintenance fifth wheel, Fischer fifth wheel coupling, circuit breaker, seats in cab: driver's comfort suspension seat incl. horizontal suspension, sun visor, 24V socket in cab, straight front axle, transmission oil cooler Additional equipment: Emission standard EURO 5, axle configuration: 6x4, trailer socket 24V / 15-pin, work lights, electrically adjustable and heated exterior mirrors, wide-angle exterior mirror heated (left), outside temperature display, rear axle differential lock, cab: L (long), suspension: leaf / air, electric window lifters, 80 A alternator, 16-speed transmission, interior filter: pollen filter, body/chassis: tractor unit, fuel tank: 400 litres, engine: 16.0 litre 375 kW V8 diesel (OM 502 LA), engine brake with constant throttle, wheelbase 3300 mm, fifth wheel coupling: mounting height 150 mm, disc brakes, steel rims 9.00x22.5, cab control, Telligent shifting, Telligent brake system with ABS+ASR, front underrun protection, CB radio pre-installation, telephone/fax pre-installation, immobilizer, central locking incl. key, permissible total weight 26.0 t