Used Fronteq Flwp 7.5 for sale (3,020)

Condition: new, maximum load weight: 44,000 kg, overall weight: 61,000 kg, axle configuration: 3 axles, Year of construction: 2026, Further information here: Hodpfxov D Abts Aflefk

Condition: new, overall weight: 49,500 kg, axle configuration: 3 axles, Year of construction: 2026, 3-Axle MULTIMAX "PLUS" semi-trailer, air-suspended and with hydraulically forced steering axles. Technical data MultiPLUS-Z-3L-UB-12AT-9.60-17.5-2.54-GR Speed: 80 km/h (legal) Total weight: 49500 kg / 31500 kg Fifth wheel load: 18000 kg Axle load: 31500 kg / 31500 kg Gooseneck length approx.: 3,900 mm Gooseneck width approx.: 2,480 mm Kingpin offset to rear approx.: 2,100 mm Fifth wheel height loaded approx.: 1205 mm Platform length approx.: 9,600 mm Extendable by approx.: ? Platform width approx.: 2,540 mm Loading height at max. load approx.: 890 mm Suspension travel approx.: -55 / +145 mm Axle spacing: 1,360 mm Total weight dependent on fifth wheel load: Yes Special permit required if exceeding country-specific regulations. Technical description Gooseneck: Gooseneck in SNT design to optimize platform length, length approx. 3,900 mm, rear with a bevel of approx. 1,000 mm x 6°. Technical fifth wheel load: 18,000 kg. For tractor-trailer combinations: 4 x 2 and 6 x 2. Platform: Platform, length approx. 9,600 mm with a bevel at the rear of approx. 900 mm x 6°. Platform behind the gooseneck can be hydraulically raised and lowered, length approx. 3,000 mm, loadable up to approx. 9,000 kg. Ramps: DR-10-900-4920-GR-HV-AXS A pair of two-piece AXS steel ramps with a length of approx. 4,920 mm and a width of approx. 900 mm. Open grating deck. Hydraulically folding ramp ends. Ramps can be individually hydraulically shifted outwards by approx. 235 mm and inwards by approx. 365 mm. Maximum load and angle of inclination according to technical data sheet: C470319 Maximum inclination angle with lowered platform: 9° Axles and suspension: BPW axles and suspension, all axles hydro-mechanically forced steered. Technical axle load: 12,000 kg Air suspension with lifting and lowering valve. Axle tool. Tires: 235/75 R 17.5 3PMSF, twin tires. Manufacturer according to our choice Load index 143/141J (144/144F) Braking system: Braking system of the brand WABCO EBS-E according to EU regulations. Without connection cable to the tractor unit. Lighting system: 24-volt lighting system in "ASPÖCK-NORDIK full LED" design according to EU regulations. (ASS 3) Metallization: Complete HRM metallization (High Resistance Metallization) Complete steel structure shot-blasted, then hot-dip galvanized with ZINACOR 850 (Zinc 85% - Aluminum 15%). Painting: 6-coat finish: Complete steel structure shot-blasted after welding. 1 coat of zinc-based primer, 1 coat of adhesion primer. Top coat with 2 coats of 2-component paint (acrylic), solid color in RAL colors of your choice, followed by sealing of the cavities with special wax. Rims in silver. Multi-color and special paint finishes available at an extra cost. Steel structure: Steel structure made of high-strength fine-grain steels. Steel qualities: S355J2+N/S355MC (yield strength 355MPa) Hjdpfx Aeizu Nteflefk S690QL/S700MC (yield strength 690MPa) Welders tested according to DIN-EN 287-1. Welding process MAG according to EN ISO 4063. Protective gas M21 according to EN ISO 14175 Front wall made of steel, plug-in, approx. 400 mm high Connection strip for supply lines to the tractor unit, mounted at the height of the outer frame profile. ASPÖCK-UNIBOX on the connection strip at the front with sockets 24N, 24S & 15-pole. 24N connection according to ISO-1185 24S connection according to ISO-3731 15-pole connection according to ISO-12098 If your pin assignment differs from the ISO connection standard, please inform us. "Anderson" socket on the connection strip at

Condition: new, Year of construction: 2024, functionality: fully functional, load capacity: 7,500 kg, total length: 3,134 mm, total width: 1,738 mm, type of input current: three-phase, rotary table diameter: 1,200 mm, overall weight: 3,000 kg, height adjustment type: hydraulic, torque: 6,350 Nm, welding current (max.): 600 A, warranty duration: 12 months, Equipment: foot remote control, Hydraulically height-adjustable rotary tilting table Hfjdpfx Ajt Hfrcoflsk Maximum load: 7,500 kg Face plate diameter: 1,200 mm Height of faceplate: 900mm-2,084 hydraulic Height of 90° tilted faceplate: 710mm-1,894mm Tilting range: 135° hydraulic Faceplate speed: 0.04-1 rpm electromotive Operation: Manual remote control and two-pedal foot switch

Condition: used, Year of construction: 2007, operating hours: 6,325 h, lifting height: 8,500 mm, fuel type: electric, mast type: triplex, battery manufacturer: Sunlight, battery capacity: 700 Ah, battery voltage: 48 V, fork length: 1,200 mm, color: other, Empty weight: 3.860 kg Battery: 700 Ah, 48 V, Year of manufacture 2016, Brand of battery Sunlight Lifting capacity: 1.600 kg Maximum passing height: 317 cm Fork carriage: Sideshifter Please contact Bas Sindorf for more information Hfsdpfov D Ehvjx Afljk

Condition: excellent (used), mileage: 3,10,824 km, power: 132 kW (179.47 HP), first registration: 03/2015, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: yellow, gearing type: automatic, emission class: euro6, Year of construction: 2015, Equipment: ABS, air conditioning, crane, cruise control, electric window regulation, fog lights, power mirror, soot filter, spoiler, = Additional Options and Accessories = - Low noise - Speed limiter - Air suspension - Air horn - Particulate filter - Stability control - Toolbox - Power take-off (PTO) = Additional Information = Axle configuration Front axle: steered Functional Mast: Telescopic (2 sections) Mast height: 9.5 m Lifting capacity: 990 kg Lifting height: 950 cm Crane: PALFINGER PK4200, year 2015, mounted behind cab Body brand: PALFINGER PK4200 CE marking: yes Condition Technical condition: very good Visual condition: very good RENAULT D7.5 180 4X2 + PALFINGER PK4200 CRANE EURO 6 L PACKAGE 180 HP DRIVE 4X2 WHEELBASE 430 CM AIR SUSPENDED CAB WITH AIR CONDITIONING AND 3 SEATS AUTOMATIC TRANSMISSION TOOLBOX Hodpfx Ajvl S Uljflofk OPEN FLATBED PLATFORM WITH REMOVABLE ALUMINIUM SIDE WALLS LENGTH 485 CM WIDTH 230 CM LOAD FLOOR HEIGHT IN THE MIDDLE 85 CM!!! ALUMINIUM CHEQUERED PLATE FLOOR LASHING EYES PALFINGER PK 4200 CRANE 2X HYDRAULIC EXTENSION 2X OUTRIGGER SUPPORTS MAX LIFTING CAPACITY 990 KG MAX LIFTING CAPACITY AT 650 CM 550 KG MAX WORKING HEIGHT 950 CM EXTRA FUNCTION FOR ROTATOR ROTATOR FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WIR SPRECHEN DEUTSCH HABLAMOS ESPANOL WE SPEAK ENGLISH

Condition: new, Year of construction: 2024, NEW Grundfos - The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. Hedpfxeyug Hxo Afljfk An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status: "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) "Alarm": Motor has stopped (flashing red indicator lights). Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required: • two dedicated digital inputs • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V • 5 V voltage supply to potentiometer and sensor • one analog output, 0-10 V, 0(4)-20 mA • two configurable digital inputs or open-collector outputs • two Pt100/Pt1000 inputs • LiqTec, dry-running protection sensor input • Grundfos Digital Sensor input and output • 24 V voltage supply for sensors • two signal-relay outputs (potential-free contacts) • GENIbus connection • interface for Grundfos CIM fieldbus module.

Condition: excellent (used), For sale: SEW-EURODRIVE WF20 DT63N4 geared motor with a three-phase motor, 0.18 kW. The unit is fully functional, tested, and ready for operation. Its technical and visual condition is good. It shows normal signs of wear and tear consistent with use. The scope of the sale includes exactly what is shown in the pictures. Technical specifications: Manufacturer: SEW-EURODRIVE Model: WF20 DT63N4 Power: 0.18 kW Power supply: 3× 220–240 V Δ / 380–415 V Y, 50 Hz Motor speed: 1320 rpm Output speed: 48 rpm Gear ratio: i = 27.5 : 1 Protection class: IP54 Operating mode: S1 Hfedpsznn Amjfx Aflek Weight: 8.07 kg Country of manufacture: Germany

Condition: used, functionality: unexamined, Ferwood Code: RU0005350 - Manufacturer Code: H6392H0306 - Condition: Used - Functionality: Not tested - Compatible Machine: CNC BIESSE - If interested, we offer a refurbishment service; please contact us. Hfedpjzmib Iofx Aflsk

Year of construction: 2018, operating hours: 1 h, condition: as good as new (ex-display), DONALDSON dryer Buran DC 045 AB Hodpfx Afsdzb Hrjlofk with electronic control with electronic level-controlled steam trap Technical specifications: Model: BURAN DC0450AB Medium: compressed air, free from aggressive components Flow rate: 7.50 m³ / min Operating pressure: 7 barg Pressure dew point: 3 ° C Compressed air connection: 2 " Electric power supply: 230 V / 50 Hz / 1 phase Frequency: 50 Hz Dimensions, weight Height: 1,055 mm Width: 645 mm Length: 920 mm Weight: 116 kg

Condition: used, functionality: unexamined, Ferwood Code: RU0001316 - Manufacturer Code: SE33400750 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Hjdpfov Du H Iex Aflofk

Condition: used, functionality: unexamined, Ferwood code: RU0005521 - Manufacturer code: 14.F5.GBD-YM00 - Condition: Used - Functionality: Not tested - Compatible machine: - If interested, we offer refurbishment service, please contact us. 8.5 KG - 46X39X27 Hfodpfxsycft Ts Afljk

Condition: good (used), Pumpex water pump 300m3/h, 7.5kw Hfedpovgnvbefx Aflok

Condition: used, Gear motor, electric motor -Speed: 57.5 rpm -Power: 0.37 kW Hsdpfx Aecwl Azofljfk -Construction: B3 angle -Diameter hollow shaft: Ø 24 mm -IP protection -Number: 2x motors available -Price: per piece -Dimensions: 345/190/H215 mm -Weight: 10.4 kg

Condition: good (used), geared motor, electric motor -Speed: 17.5 rpm -Power: 0.18 kW -Design: B3 Hfodpfx Afsb A Rktolek -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Weight: 16 kg

Condition: good (used), clear span: 1,400 mm, total length: 7,510 mm, shelf height: 1,750 mm, Technical data for the pallet racking system: Rack system: Stow Model: Pal Rack NS Technical data for installation: Number of rack rows: 01 unit Length per rack row: approx. 7,510 mm Number of bays per rack row: 05 units á 1,400 mm Number of levels plus ground level: 02 units Scope of delivery includes: 06x pallet rack uprights, used Material color: RAL 5015 sky blue Upright type: PNFB12 Profile dimensions: 85 x 65 x 1.75 mm Including horizontal and diagonal bracing, base plates The uprights are pre-assembled (bolted lattice construction) 1,750 mm high 1,100 mm deep 20x pallet rack beams, used Material color: orange U-profile: 150 x 50 x 3.00 mm Connector: 4 HK (hooks) Design: header beam Clear opening: 1,400 mm 40x safety pins, used Hfsdpsw I R Sljfx Aflsk Material color: Sendzimir galvanized For securing the cross beams against accidental lifting 24x wedge anchors, new Manufacturer: Hilti Model: HST2 M12x105/10 Material: carbon steel, galvanized Approved for: cracked concrete 12x shimming plates, used Finish: fully galvanized For leveling rack uprights positioned on uneven floors 01x load sign With information on bay and compartment loads, manufacturer, and order number Dimensions: 420 x 297 x 3 mm General information about the item: This item is only offered for collection. If transport or dispatch is required, additional costs will be incurred, which can be quoted separately depending on delivery location and scope.

Condition: good (used), GRANULATOR DEGA MODEL : DG304 MAIN MOTOR : 7.5KW ROTOR LENGTH : 400MM ROTOR DIAMETER : 305MM Hjdpfx Ajru H H Eofljfk

Condition: new, Year of construction: 2026, Fully automatic cutting of large aluminium profiles with simple-to-use automation. Put down any aluminium profile, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Optional fully automatic inline optimiser. Automatic measuring of aluminium profile lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and aluminium feeding rates for maximum process productivity. • Automatic optimiser mode with aluminium laser length measure and optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Automated servo positioning of the saw mitre angle up to ±75° (optional). Highly suitable for: Hedpfxel Sm Ndj Aflofk • Bulk aluminium manufacture • Mitered aluminium structures manufacture • Windows and doors manufacture • Blinds, shades and furniture manufacture • Fabricated aluminium structures manufacture • Aluminium facades manufacture Model: A700 Length: 7.5 m Material Length: 6180 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2026, Fully automatic cutting of large aluminium profiles with simple-to-use automation. Put down any aluminium profile, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Optional fully automatic inline optimiser. Automatic measuring of aluminium profile lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). Simple, high-speed alternative to double-headed saws. Just enter (or import) the lengths and angles you need and press GO. The machine continuously produces your angled parts, accurately and at high speed. • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and aluminium feeding rates for maximum process productivity. • Automatic optimiser mode with aluminium laser length measure and optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Automated servo positioning of the saw mitre angle up to ±75° (optional). Highly suitable for: • Bulk aluminium manufacture • Mitered aluminium structures manufacture • Windows and doors manufacture • Blinds, shades and furniture manufacture • Fabricated aluminium structures manufacture • Aluminium facades manufacture Model: A700 Length: 7.5 m Material Length: 6180 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES. Hfsdpfjmdqwlox Afljk

Condition: new, Year of construction: 2026, Fully automatic cutting of small-to-medium size steel with simple-to-use automation. Put down any steel to cut, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Servo motor saw actuation with industrial ball-screw actuator. Automatic detection of the steel present with the machine then setting its cut start point for minimum stroke and cutting time. No limit sensors or any operator action required. For every piece of steel you place down to cut, no matter what length, a laser sensor measures its length. Our powerful optimisation algorithm on-the-fly calculates the best order of parts to produce minimum waste. The machine automatically cuts the calculated list without stopping. No need for any inputs from you, just keep putting in new steel stock. Simple, high-speed alternative to double-headed saws. Just enter (or import) the lengths and angles you need and press GO. The machine continuously produces your angled parts, accurately and at high speed. • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Automatic labels printing for parts using data from the job list (manual label application, optional). • Fully adjustable saw cutting and material feeding rates for maximum process productivity. • Saw auto-detect of bar size size to set minimum stroke and cut time for cutting. • Saw blade jam detect and automatic closed-loop react to de-escalate. • High-flow, high-capacity, no leaks coolant and drainage system. • Automated servo positioning of the saw mitre angle up to ±45° (optional)• Automated servo positioning of the saw mitre angle up to ±45° (optional) Highly suitable for: • Steel fabrications manufacture Hjdpfxemdq Ths Aflefk • Agricultural manufacture • Caravans and trailers manufacture • Doors and gates manufacture • Retail steel sales Model: S400 Length: 7.5 m Linear Unit: ProfiStop Alpha Material Length: 6180 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2026, Fully automatic cutting of small-medium aluminium profiles with simple-to-use automation. Put down any aluminium profile, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Hfodpjf Eh Hpjfx Aflsk Optional fully automatic inline optimiser. Automatic measuring of aluminium profile lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and aluminium feeding rates for maximum process productivity. • Automatic optimiser mode with aluminium laser length measure and optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). Highly suitable for: • Windows and doors manufacture • Commercial office manufacture • Data centres manufacture • Linear lighting manufacture • Blinds and shades manufacture • Composites manufacture Model: A420 Length: 7.5 m Material Length: 6180 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2026, A550 Fully Automatic Solid Wood Saw 7.5 m Fully automatic cutting of medium-large wood with simple-to-use automation. Put down any wood and the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Your fully automatic saw can optionally come as an inline optimiser saw. For every piece of wood you place down to cut, no matter what length, a laser sensor will measure its length. Our powerful optimisation algorhithm then takes your cut list and calculates the best order of parts to cut from this wood so that wastage is minimised. All of this happens on-the-fly, during the machine operation process, and without needing any input from you. • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and wood feeding rates for maximum process productivity. • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Automated servo positioning of the saw mitre angle up to ±75° (optional). Highly suitable for: • Frame and truss manufacture • Sheds manufacture • Furniture manufacture • Mitre timber structures manufacture • Bulk wood cutting Model: A550 Length: 7.5 m Material Length: 6180 mm Pushing capacity: 20 - 40 kg Hedpfsf Ekncsx Afljfk Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2026, Fully automatic cutting of hardened and stainless steels with simple-to-use automation. Put down any steel to cut, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Optional fully automatic inline optimiser. Automatic measuring of steel lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and material feeding rates for maximum process productivity. • Automatic optimiser operation with input material laser length measure and auto-optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • In-line direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). Highly suitable for: Hfedpfx Aoma Dd Isflsk • Stainless and hardened steels manufacture • Hydraulic tubing manufacture • Composite / matrix materials manufacture • Carbon fibre manufacture • Fiberglass manufacture Model: S200 Length: 7.5 m Material Length: 6180 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2026, Fully automatic cutting of medium-large aluminium profiles with simple-to-use automation. Put down any aluminium profile, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. For every piece of aluminium you place down to cut, no matter what length, a laser sensor measures its length. Our powerful optimisation algorithm on-the-fly calculates the best order of parts to produce minimum waste. The machine automatically cuts the calculated list without stopping. No need for any inputs from you, just keep putting in new aluminium stock. Simple, high-speed alternative to double-headed saws. Just enter (or import) the lengths and angles you need and press GO. The machine continuously produces your angled parts, accurately and at high speed. • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and timber feeding rates for maximum process productivity. • Automatic optimiser mode with timber laser length measure and optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Automated servo positioning of the saw mitre angle up to ±75° (optional). Highly suitable for: • Windows and doors manufacture Hfodsf Eknropfx Aflsk • Mitered aluminium structures manufacture • Aluminium fabricated structures manufacture • Composites manufacture • Blinds, shades and furniture manufacture • Aluminium retail sales Model: A550 Length: 7.5 m Linear Unit: ProfiStop Alpha Material Length: 6180 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2026, Fully automatic cutting of medium-large aluminium profiles with simple-to-use automation. Put down any aluminium profile, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Optional fully automatic inline optimiser. Automatic measuring of aluminium profile lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Automatic labels printing for parts using data from the job list (manual label application, optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Automated servo positioning of the saw mitre angle up to ±75° (optional). Highly suitable for: • Windows and doors manufacture Hfedpfsl Smt Tsx Aflek • Mitered aluminium structures manufacture • Aluminium fabricated structures manufacture • Composites manufacture • Blinds, shades and furniture manufacture • Aluminium retail sales Model: A550 Length: 7.5 m Material Length: 6180 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2026, T460 Fully Automatic Solid Wood Saw 7.5 m Fully automatic cutting of medium-large wood with simple-to-use automation. Put down any wood and the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Your fully automatic saw can optionally come as an inline optimiser saw. For every piece of wood you place down to cut, no matter what length, a laser sensor will measure its length. Our powerful optimisation algorhithm then takes your cut list and calculates the best order of parts to cut from this wood so that wastage is minimised. All of this happens on-the-fly, during the machine operation process, and without needing any input from you. • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and timber feeding rates for maximum process productivity. Hfsdpol Uxr Aofx Aflek • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). Highly suitable for: • Frame and truss manufacture • Pallets manufacture • Windows and doors manufacture • Furniture manufacture • Bulk timber cutting Model: T460 Length: 7.5 m Linear Unit: ProfiStop Alpha Material Length: 6180 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.