Used Good Condition / 4-Way Combination for sale (83,724)

Condition: used, mileage: 500 km, power: 294 kW (399.73 HP), axle configuration: 4x2, color: white, driver cabin: day cab, gearing type: automatic, Year of construction: 2026, Equipment: ABS, air conditioning, For inquiries regarding the vehicle, please contact Mr. Seidel (available by phone). Iveco S-Way AD190S40/P box truck with tail lift. Steel rims, standard reverse gears, speed limiter 90 km/h, manually operated cab tilting mechanism, halogen headlights, black decorative film on doors, driver's cab rear wall without window, fog lights, front underrun protection for chassis with a total weight greater than 7.490 kg, first aid kit, plastic bumper, black driver's cab components, electrically adjustable and heated exterior mirrors, standard driver's cab roof insulation, white flat roof, electronic immobilizer and 2nd vehicle key, digital EG control unit 4.1, static co-driver seat, air suspension on rear axle, Hi-TroniX 12TX 1810 TD, chocks, 2 pieces, batteries horizontally mounted on the frame, 2160 Watt generator (24 Volt x 90 Ampere). Recommended for tail lift operation, rear shock absorbers, vertical dry air filter, 1-cylinder 352 ccm air compressor, gray chassis frame, APU pressure release into the atmosphere, standard total vehicle braking system, steel air reservoirs, number depending on suspension version and trailer version, front stabilizer bar, exhaust tailpipe, to the left, emission standard EURO VI E, rear frame overhang, 2793 mm, omission of rear underrun protection, AdBlue tank, 50 liters, fuel pre-filter with separator, heated, standard transmission mode, optimized aerodynamics on the A-pillar, preparation for toll system (OBU), includes antenna and wiring harness on the dashboard without a receiver unit, ECO-Switch: switches from power mode to eco mode to optimize the total cost of ownership (TCO) through fuel-optimized engine and transmission tuning, VDI interface (Vehicle-Data-Interface) for telematics services (FMS), version 4.0, transmission software ECO-Roll (coast function), driving style analysis (DSE), adaptive cruise control (ACC), lane departure warning system (LDWS), warning triangle, design and dimensions according to ECE-27 directive, hazard warning lights, electronic stability program (ESP), advanced emergency braking system (AEBS), DRIVE T. 315/70R22.5, transparent sun visor, installed on the outside of the driver's cab roof, with curtains on the bed, signal horn behind the bumper (compressed air), ashtray in the center console, reinforced parabolic spring on the front axle, electrical preparation for tail lift operation according to VEHH standard, weight variant front axle 8,000 kg / rear axle 11,500 kg (technically possible 13,000 kg), reinforced torsion bar stabilizer rear axle D 60mm, battery disconnect switch in the driver's cab, electrically operated, batteries 225 Ah, without jack, battery charging socket, terminals, rear axle ratio: i 3.08, trailer socket for 24 Volt operation, 15-pin, trailer coupling, manufacturer Rockinger, trailer version for trailer operation with continuous braking system, fuel tank 390 liters, aluminum, rear cross member, D-value: 130 kN, trailer coupling, 40 mm, 130 kN, edge protection frame end, electrical connection for body on the left side of the frame, side marker lights, warning sound for reversing, switchable, axle load indicator in the instrument cluster, hill start assist, for comfortable starting on inclines, LED rear lights, tire manufacturer Fa. GOODYEAR tires 315/70 R22.5 KMAX S GEN-2 (3PMSF), KMAX D GEN-2, operating and maintenance manual printed, new box truck with tail lift according to AN 200028995 + optional side door on the right, ... Pedjyfqpropfx Airogu

Condition: good (used), Year of construction: 1993, functionality: fully functional, Table milling machine TF900 Pedpfx Aieygm D Usrogu - Year of manufacture: 1993 - 380 Volt - 3 speed settings - good condition Transport possible at additional cost! Due to the age of the used machine, warranty is excluded when selling to commercial customers.

Condition: new, power: 309 kW (420.12 HP), fuel type: diesel, empty load weight: 7,829 kg, maximum load weight: 18,171 kg, overall weight: 26,000 kg, tire size: 315/80R22.5, axle configuration: 6x4, wheelbase: 3,500 mm, brakes: engine braking, color: orange, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, Equipment: ABS, air conditioning, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), fog lights, onboard computer, power assisted steering, seat heater, traction control, Vehicle location: Bovenden, in-house inventory, 1x air-suspended seat, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, ABS (anti-lock braking system), traction control (ASR), constant throttle, PTO (power take-off), automatic transmission, leaf suspension, trailer hitch with air and light connections, aluminum tank, underride protection, roof hatch, green environmental badge. Wheelbase: 3500 mm. 2x PTOs, located on engine and transmission! Frame length approx. 5750mm! Frame height approx. 1130mm! New vehicle from stock! Day registration 07.05.2026. ACCESSORY DETAILS WITHOUT GUARANTEE, subject to alterations, prior sale, and errors! Pedpfx Aeygvrueirogu

Condition: new, power: 309 kW (420.12 HP), fuel type: diesel, empty load weight: 12,500 kg, maximum load weight: 13,500 kg, overall weight: 26,000 kg, tire size: 315/80R22.5, axle configuration: 6x4, wheelbase: 3,500 mm, brakes: engine braking, color: orange, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, Equipment: ABS, air conditioning, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), fog lights, onboard computer, power assisted steering, seat heater, traction control, Vehicle location: Bovenden, location code: Haus Features: 1 air-suspended seat, seat heating, rear window, electric mirrors, heated mirrors, electric window (left), electric window (right), air conditioning, sun visor, cruise control, ABS (anti-lock braking system), traction control (ASR), constant throttle, auxiliary drive, automatic transmission, leaf spring suspension, trailer hitch with air and light connections, aluminum fuel tank, underbody protection, hydraulic cross-locking, roof hatch, green environmental badge. Wheelbase: 3500 mm Superstructure: with 20-ton roll-off system Hyva T20-47 for containers up to 5.7 m, 2 auxiliary drives, located on the engine and transmission! Frame length approx. 5750 mm! Frame height approx. 1130 mm! New vehicle from stock! Temporary registration date: May 7, 2026. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors! Podpfxsygvrze Airjgu

Condition: new, power: 397.17 kW (540.00 HP), fuel type: diesel, axle configuration: 8x4, color: white, gearing type: automatic, emission class: euro6, Equipment: hydraulics, onboard computer, retarder, trailer coupling, New Iveco T-Way 500 / 540 HP Emilcamion 20 m³ tipper body with hydraulically operated tailgate BRAND NEW FROM FACTORY TO BE REGISTERED - Transmission: Automatic - Retarder: Intarder PERSONALIZED FINANCING OR LEASING OPTIONS AVAILABLE ON SITE. FROM 24 UP TO A MAXIMUM OF 96 INSTALMENTS, ALSO WITH ZERO DOWN PAYMENT. OTHER LOCATIONS OF OUR GROUP: DOMENICO TRUCK SRL HEADQUARTERS NAPLES DOMENICO ESPOSITO S.P.A. EBOLI (SA) BRANCH – AUTHORIZED DEALER FOR MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL AND MAXUS CONTACTS: 0823 1686306 Psdpfxov H Skco Airogu 335 6713062 BRANCH OPENING HOURS: MONDAY-FRIDAY 8:30/19:00 – SATURDAY 8:30/14:00 WE OFFER A WIDE SELECTION OF USED MULTI-BRAND COMMERCIAL AND INDUSTRIAL VEHICLES, INCLUDING: Fiat – Hyundai – Daf – Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania – S-Way – S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man – Nissan V8 – Intarder- 770s – Limited Edition – 660 S Semi-trailer – Refrigerated Semi-trailer – Tipper – Lamberet – Schmitz – Isuzu – Flatbed – Crane – Tipper body – 4 axles – Rear 4 axles – Tway – T-Way – 540 – 460 HP – Xway – X-Way – Three-way tipper – V8 – Scania – Frost Edition – Curtain-side – Box – Tail lift – Refrigerated cell – Insulated with fridge – Van Domenico Truck Ltd. disclaims all liability for possible discrepancies regarding technical specifications, equipment or options that may, in some cases, differ from those listed in the description. We invite you to verify the features of the specific vehicle.

Condition: used, mileage: 4,21,700 km, power: 353 kW (479.95 HP), first registration: 12/2021, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, Iveco S-Way 480 Pgsdsx Nb Nxopfx Airou Long cab with high roof, exterior sun visor, intarder, 2 beds, fridge box, spoiler, adaptive cruise control, lane assist, auxiliary heater, 2 fuel tanks (710 litres + 550 litres), EURO 6D, multifunction steering wheel, 2x electric windows, electric mirrors, differential lock, ABS. Front axle: LEAF SPRUNG Rear axle: AIR SUSPENDED Tyres: Front axle: 385/55R22.5 Rear axle: 315/70R22.5

Condition: used, mileage: 4,84,000 km, power: 353 kW (479.95 HP), first registration: 02/2022, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, Iveco S-Way 480 Long cab with high roof, exterior sun visor, intarder, 2 beds, fridge, spoiler, adaptive cruise control, lane assist, auxiliary heater, 2 fuel tanks: 710 liters + 550 liters, EURO 6D, radio with Bluetooth and navigation system, multifunction steering wheel, 2x electric windows, electric mirrors, differential lock, ABS. Front axle: LEAF SPRING SUSPENSION Rear axle: AIR SUSPENSION Tires: Front axle: 385/55R22.5 Pjdpfx Aeynp U Ssirogu Rear axle: 315/70R22.5

Condition: good (used), Included in delivery are: 28x stacking transport box, used Manufacturer: SSI Schäfer type: 14/6-4 design: recessed grip on both sides color: blue material: polypropylene Outer dimensions LxWxH: 210x150x123mm inner dimensions LxW: 190x123mm Useful height in stack: 110 mm Capacity: 2,50 Liter Stackable: yes Weight | Piece: 0,266 kg Remark: These are used stacking transport boxes. There may be scratches, soiling and color defects may be present. Application: Pgodpjpl Tdnofx Airsu The stacking transport boxes are suitable for storing tools, screw materials and other small parts. small parts. General information about the article: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: good (used), The scope of delivery includes: 1.044x stacking transport box, used Manufacturer: SSI Schäfer type: 14/6-4 design: recessed grip on both sides color: blue material: polypropylene Outer dimensions LxWxH: 210x150x123mm inner dimensions LxW: 190x123mm Useful height in stack: 110 mm Capacity: 2,50 Liter Stackable: yes Weight | Piece: 0,266 kg Weight / pallet: approx. 95,00 kg Weight / 1,044 pcs.: approx. 380.00 kg Pjdpfxspl Tf Eo Airjgu Remark: These are used stacking transport boxes. There may be scratches, dirt and color defects. color defects may be present. Application: The stacking transport boxes are suitable for storing tools, screw materials and other small parts. small parts. General information about the article: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: good (used), The scope of delivery includes: 261x stacking transport box, used Manufacturer: SSI Schäfer type: 14/6-4 design: recessed grip on both sides color: blue material: polypropylene Outer dimensions LxWxH: 210x150x123mm inner dimensions LxW: 190x123mm Podpfepl Uc Tox Airjgu Useful height in stack: 110 mm Capacity: 2,50 Liter Stackable: yes weight | piece: 0,266 kg Weight | pallet: approx. 95,00 kg Remark: These are used stacking transport boxes. There may be scratches, soiling and color color defects may be present. Field of application: The stacking transport boxes are suitable for storing tools, screw materials and other small parts. small parts. General information about shipping the item: - The goods are shipped free of charge throughout Germany - The island transport is excluded - The delivery takes place only to the curb - For unloading, access and departure routes to the unloading point Unloading point for a 40to Sattelzug voraussgesetzt - The unloading takes place from the buyer by forklift truck

Condition: excellent (used), Cnc rotary table, Nikken 5AX-230 4 and 5 axis for Mazak etc. was mounted on a VTC 300, due to new machine 5 axis now for sale, Pgodpfxsp U Umkj Airsu

Condition: new, functionality: fully functional, power: 397.17 kW (540.00 HP), fuel type: diesel, axle configuration: 8x4, brakes: intarder, color: white, gearing type: automatic, Equipment: ABS, additional headlights, air conditioning, retarder, 🇮🇹 New Iveco T-Way 500 / 540 HP ⭕️ BRAND NEW FROM FACTORY ⭕️ TO BE REGISTERED - Transmission: Automatic - Retarder: Intarder - 0 km POSSIBILITY OF CUSTOMIZED FINANCING OR LEASING PACKAGES AVAILABLE ON SITE. FROM 24 UP TO A MAXIMUM OF 96 INSTALMENTS, EVEN WITH ZERO DOWN PAYMENT. OTHER LOCATIONS OF OUR GROUP: DOMENICO TRUCK SRL - NAPLES HEADQUARTERS DOMENICO ESPOSITO S.P.A. - EBOLI (SA) LOCATION - OFFICIAL DEALER FOR: MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL AND MAXUS CONTACTS: 0823 1686306 335 6713062 OPENING HOURS: Pgsdouxz A Aepfx Aireu MONDAY-FRIDAY 8:30 AM / 7:00 PM - SATURDAY 8:30 AM / 2:00 PM WE OFFER A WIDE RANGE OF USED MULTIBRAND COMMERCIAL/INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf – Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania – S-Way – S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man – Nissan V8 – Intarder – 770s – Limited Edition – 660 S Semi-trailer – Refrigerated Semi-trailer – Lamberet – Schmitz – Isuzu – Fixed Platform – Crane – Tipper – 4 Axles – 4 Rear Axles – Tway – T-Way – 540 – 460 HP – Xway – X-Way – Three-way Tipper – V8 – Scania – Frost Edition Curtain-sided – Box – Tail Lift – Refrigerated Cell – Insulated With Fridge – Van Domenico Truck srl declines all responsibility for any discrepancies in equipment, options, and features which may, in some cases, differ from what is stated in the description. We invite you to verify the specific vehicle features.

Condition: new, Welding electrode for contract welding Manufacturer: Duramit W4 Material: 1.2567 Diameter: 6 mm Length: 450 mm 40 pieces per package 6 packages available 95 euros per package Pgjdpfxshhyits Airou

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system in hot-dip galvanized finish Scope of delivery: Podpfjfdkbhsx Airogu 4 rack uprights, height 3,000 mm, with base section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in a 100 mm grid - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm distance - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable transport with notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The base must be made of concrete, level and suitable for dowels, and must be able to withstand the applied loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity, as well as any necessary official permits. The rack uprights must be anchored in the ground on site; anchoring to the wall is not necessary and is not recommended. According to the occupational accident insurance association, it is recommended that the rack uprights have a minimum of 500 mm overhang from the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system with hot-dip galvanized finish Scope of delivery: 4 rack uprights, height 4,160 mm, with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Pedofdkb Topfx Airegu Longitudinal and diagonal braces for 4,000 mm rack length (spacing 1,300 mm) Fastening material (screws, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height at 100 mm intervals - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Telephone technical support - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable transport with prior notification of delivery. The material is packed in a way that allows for easy unloading. When installed outdoors, the load capacities are reduced by wind and snow loads. The substrate must be made of concrete, level, and suitable for dowels, and must be able to absorb the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity, as well as any necessary official permits. The rack uprights must be anchored to the ground on site; anchoring to the wall is not necessary and not recommended. According to the occupational safety association, it is recommended that the rack uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: bolted system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 2,600 mm with base section 1,000 mm 12 cantilever arms, 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm distance - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow load. The ground must be made of concrete, be level and suitable for dowels, and be able to absorb the applied loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity, as well as any necessary official permits. The rack uprights must be anchored in the ground on site; anchoring to the wall is not necessary and not recommended. Pedpfod Tbbdsx Airegu According to the occupational association, it is recommended that the rack uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system with hot-dip galvanized finish Scope of supply: 4 rack uprights, 4,160 mm high, with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (1,300 mm spacing) Fastening material (screws, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: Pedpfsd Tqalsx Airogu - Sturdy steel construction made of IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in a 100 mm grid - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable transport with prior notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow load. The ground must be made of concrete, be level and suitable for dowels, and be able to withstand the acting loads. The ground conditions and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored in the ground on-site; anchoring to the wall is not necessary and is not recommended. According to the occupational association, it is recommended that the rack uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: new, We offer you a new workbench from the manufacturer Metal Sistem for sale. Delivery time: approx. 3-4 weeks Technical data for the workbench: Manufacturer: Metal Sistem Type: Super 4/5/6 Workbench width: 1,200 mm Workbench depth: 900 mm Workbench height: 900 mm Included in the scope of delivery: 02x Workbench frames, new Material color: fully galvanized Frame type: TS4 including cross and diagonal braces, foot plates The frames are pre-assembled (bolted framework) 888 mm high 700 mm deep 04x Workbench crossbeams, new Crossbeam type: TS Profile dimensions: 70 x 42 x 3 mm Clear span: 920 mm Material color: fully galvanized 01x Worktop, new Wood type: MDF Thickness: 28 mm Dimensions: 900 x 1,200 mm Material color: black 03x Steel shelves, new Dimensions: 300 x 700 mm Type: H29/D Pgodpfxjhq Twye Airou 01x Angle set, new for mounting the worktop 08x Locking hooks, new Material color: fully galvanized

Condition: good (used), Manufacture: ALLOYD Psdpfsuhn Dijx Airjgu Tip: 4 seec Turntable

Condition: good (used), Year of construction: 2004, fuel type: electric, 4-way electric forklift, manufactured by HUBTEX, type MQ120 SO, year of manufacture 2004. Load capacity: 12,000 kg. Lifting height: 2700 mm. Fork length: 1700 mm. Podpfx Aedgp U Seiregu Operating hours: 8990.

Condition: good (used), 4/2-way valve, solenoid valve, hydraulic valve, air valve, pressure valve, valve block, control block -Type: DG4V-3 2A MU H7 6Q -Weight: 2 kg Pedjb A Sf Hopfx Airsgu

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 6,766 h, load capacity: 3,000 kg, lifting height: 4,900 mm, free lift: 1,700 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 2,250 mm, motor manufacturer: Toyota 4Y, fork length: 1,065 mm, tire condition: 100 %, overall weight: 9,500 kg, empty load weight: 6,500 kg, total height: 2,250 mm, total length: 1,550 mm, total width: 1,500 mm, Equipment: 3rd hydraulic function, 4th hydraulic function, CE marking, adjustable boom, front guard, head guard, hydraulic fork positioner, lighting, pallet forks, sideshift, Very good condition Fork positioner + sideshift Toyota engine Pjdpfx Aioz Hy Rwersgu We sell forklifts after a full service. Prepared for the end user. Ready to use. We can arrange transport within Europe and worldwide.

Condition: used, mileage: 3,99,926 km, power: 338 kW (459.55 HP), first registration: 09/2020, fuel type: gas, overall weight: 18,000 kg, emission class: euro6, Automatic Transmission - Retarder Pjdpfx Asz Rzi Rjirsgu For more information

Condition: used, mileage: 3,03,388 km, power: 419 kW (569.68 HP), first registration: 04/2023, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: red, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Vehicle No. for customer inquiries: 213 ----Additional features * Automatic climate control * Intarder * ACC adaptive cruise control * Navigation system * Driver's air-suspension seat with seat heating and seat ventilation * Co-driver's air-suspension seat with seat heating * Refrigerator and cool box * 2 x fuel tank 710 liters + 550 liters ----Special equipment * Base color: red * Upholstery: fabric * ABS, ESP * On-board computer * Differential lock * Ready for operation * Truck registration * Particulate filter * Auxiliary heater * Cruise control * Roof spoiler * Hands-free system Bluetooth * Spacious cab * LED headlights * Multifunction steering wheel * Fog lights * Radio CD / USB / AUX / SD * Winter tires * Glass sunroof * Sleeper cab 2 x bed Podpfxoz Edl As Airegu * Lane keeping assistant * Central locking with remote control * Electric windows * Electrically adjustable, heated side mirrors * Electric immobilizer * Urea tank (AdBlue) ----Technical data: * HSN/TSN: 4192/000 * Automatic transmission * Suspension: leaf spring/air suspension * Emission class: Euro6d * Environmental badge: 4 (Green) * Wheelbase: 3790mm * Payload: 9,256 kg * Tire size: 385/55 - 315/70 R22.5 * Tire tread: approx. 30% - 20% ----German vehicle! * €53,750 net plus VAT * A deposit will be retained for export to third countries or the EU. This will be refunded to the buyer after successful customs clearance or delivery. * Worldwide delivery possible - please ask us for your individual offer! * We will gladly take your used vehicle in part exchange! * Financing/leasing possible even in difficult cases * This description serves only for the general identification of the vehicle and does not constitute a guarantee in the legal sense. * The information does not claim to be complete. The information/descriptions/images provided are non-binding and do not constitute guaranteed characteristics. * We assume no liability for errors and obvious mistakes. * The buyer is obliged to independently verify the condition and equipment of the vehicles before purchase. * Subject to price changes, typos, errors and prior sale. * Dear customer, please understand that due to the age and mileage, we prefer to sell the vehicle to commercial operators or dealers. Thank you very much. * We speak: * Greek / Miláme Elliniká Tel: +49.162.6567750 * Russian / My govorim na Russkom Tel: +49.171.2767737 * WhatsApp/Viber: Tel: +49.162.6567750 * E-mail: * Internal number: 213

Condition: used, mileage: 80,312 km, power: 338 kW (459.55 HP), first registration: 09/2023, fuel type: diesel, empty load weight: 11,140 kg, maximum load weight: 14,860 kg, overall weight: 26,000 kg, tire size: 315/80 22,5, tire condition: 40 %, axle configuration: 6x2, wheelbase: 4,500 mm, brakes: retarder, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2023, operating hours: 80,312 h, front tire size: 315/80 22,5, rear tire size: 315/80 22,5, Equipment: ABS, air conditioning, differential lock, hydraulics, trailer coupling, truck registration, Reference no. for inquiries: 41712 Iveco, AD260SY * Year of manufacture: 2023 * ABS, Anti-lock Braking System * Trailer hitch * EBS, electronic brake system * Automatic climate control * Air suspension * Retarder / ZF-Intarder * PTO, auxiliary drive * Tipping hydraulics * Differential lock * Low noise * Local distribution > 7.5 tons * Tag axle * Tool compartment * Radio CD Pjdpfxoz Efybo Airsgu * Electric windows + mirrors * Lane change warning system * Transmission type: Automatic * Suspension: Leaf / Air * Gross vehicle weight: 26,000 kg * Unladen weight: 11,140 kg * Payload: 14,860 kg * Permissible gross vehicle weight: 26,000 kg * Tire condition 1st axle: 40% -- 40% - Tire size: 315/80 R22.5 * Tire condition 2nd axle: 30% | 30% -- 30% | 30% - Tire size: 315/80 R22.5 * Tire condition 3rd axle: 40% -- 40% - Tire size: 315/80 R22.5 * Wheelbase: 4500 mm * Tire sizes: 315/80 R22.5 * Iveco X-Way AD260SY-46 * Roll-off tipper Palfinger PHT 20 Perform * Engine-side auxiliary drive * 290L diesel tank * LED taillights * Hydraulic container locking Disclaimer: Subject to changes, prior sale, and errors. More pictures and videos can be found on our website. Our extensive service includes, for example: * Purchase / Sale / Rental of commercial vehicles * Quick and straightforward financing * Application for all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: New tarpaulins, lettering, paintwork, etc. * Professional loading / cargo securing * TÜV inspections, registration service * Transport of commercial vehicles Ask our trained specialists, we will be happy to advise you.