Used Gustav Wolff Eccentric Press for sale (12,903)

Condition: used, Year of construction: 1967, pressure:80 t throat:280 mm stroke:20-120 mm table width:710 mm table depth:560 mm ram head dimension:560x355 mm ram adjustment:72 mm no. of strokes:125 Hub/min total power requirement:9,5 kW weight of the machine ca.:4,4 t Lrodpfecxxrhox Ab Uot

Condition: used, Single-column – Eccentric press EBU, Type 75 SKU Machine No. P 4598462, Year of manufacture 1962 Pressing force 75 tons Reach 300 mm Table area 800 x 620 mm Die opening 325 x 225 mm Slide area 470 x 180 mm Tool holder bore Ø 40 mm Table height above floor 845 mm Stroke adjustment 16 - 140 mm Slide adjustment 80 mm Maximum installation height approx. 420 mm Stroke rate 60 + 105 strokes/min Motor power 4 kW Power supply 380 Volts, 50 Hz - Pneumatic clutch-brake combination EBU - Overload protection with shear plate in the slide - Tool monitoring system UNIDOR, Type APS MINI - Mechanically driven strip feed with strip straightener OSTERKAMP, Type ZPN 200/350 - Strip width: 200 mm, feed length: max. 350 mm - Strip thickness: max. 3 mm or approx. 200 x 1.5 mm - 2 speeds through 2 V-belt stages on the gear pre-stage - Two-hand operation - Simple work area guard that can be swung open - Table height adjustment in the lowest position = threaded spindles for adjustment 50 mm below floor level - Control cabinet and operator panel for tool monitoring located beside the machine - Automatic central lubrication Lrodpfjdzqltjx Ab Uet - 4 machine feet Space requirement L x W x H 2600 x 2300 x 2450 mm Weight approx. 5.5 tons Good condition

Condition: used, Year of construction: 1998, Beutler P96-C630 - Eccentric Press - Mobile control panel - Infinitely variable drive - Clutch/brake combination - Overload protection in the ram - Light barrier - Gooseneck lamp - Year of manufacture: 1998 Technical Data - Force: 630 kN - Stroke: 12 - 120 mm - Strokes per minute: 30 - 130 - Max. run-on time: 96 ms - Throat depth: 300 mm - Distance table/ram: 495 mm - Gap between frame walls: 270 mm - Ram area: 450 x 360 mm - Ram adjustment: 120 mm Lrjdpfxeyna N Ts Ab Ujt - Table area: 800 x 560 mm - Table opening: Ø 100 mm - Working height: 880 mm - Min. safety distance: 192 mm - Drive power: 5.5 kW - Operating voltage: 3x 400 V / 50 Hz - Machine dimensions (W x H x D): 1800 x 2600 x 1600 mm - Control cabinet dimensions (W x H x D): 800 x 1700 x 450 mm - Weight: approx. 5500 kg

Condition: used, Machines for export from company closure Stock No. 62506 = RAPID Type DGL 5000 / 500 double mitre saw = Weight approx. 1,200 kg = Special price EUR 1,800 Stock No. 54183 = MÜLLER hydraulic press 10 ton, without hydraulic pump = Weight approx. 1,200 kg = Special price EUR 1,000 Stock No. 57780 = MÜLLER hydraulic press Type HEP 40 = Weight approx. 2,200 kg = Special price EUR 1,900 Hydraulic press – separate hydraulic power unit = Weight approx. 3,000 kg Stock No. 60507 = WEBO drill with 4 spindles = Weight approx. 1,900 kg = EUR 1,600 Stock No. 57592 = ALZMETALL drill with 2 spindles = Weight approx. 1,700 kg = EUR 1,200 Stock No. 60699 = WEBO column-type drill MK5 = Weight 1,600 kg = Special price EUR 1,600 Stock No. 60177 = WEBO radial drilling machine Type R4bR = Weight approx. 2,800 kg = Special price EUR 1,900 Stock No. 57432 = GILDEMEISTER Type GD 160 = Weight approx. 4,000 kg = Special price EUR 1,900 --- Many more machines in stock, available for immediate export. Lrsdpfsy Erzdsx Ab Uet For example: 10 units welding machines, CLOOS, ESS etc. 2x HITACHI SEIKI CNC lathes

Condition: used, Year of construction: 1978, machine/vehicle number: 4788, Capacity: 35 ton Throat depth: 225 mm Ram stroke: 8 - 80 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 325 mm Table surface area : 600 x 450 mm Slide area: 300 x 225 mm Number of strokes: 160 s.p.m. Lrsdpew Tukiofx Ab Uet Required power: 2,2 kW Dimensions L x W x H: 1000 x 1600 x 2200 mm Weight of machine approx.: 1,9 ton

Condition: used, pressure:70 t throat:250 mm stroke:10 - 120 mm table-size:750 x 500 mm dayligth:350 mm ram adjustment:350 x 200 mm Lrjdpfxjcxxtte Ab Uet no. of strokes:50 Hub/min daylight:310 x 370 mm total power requirement:5 kW weight of the machine ca.:3,5 t dimensions of the machine ca.:1,3 x 1,4 x 2,5 m tilting eccentric press, tie-rod design with UVV movable protective screen, pneumatic clutch, quadruple led tappet, separate electric cabinet, central lubrication, electric two-hand operation, emergency cut-off

Condition: refurbished (used), Year of construction: 1996, functionality: fully functional, TECHNICAL FEATURES: Press Model: T25-VE Year of construction: 1996 Nominal force: kN 250 Free passage between the uprights mm: 220 Distance between the axis of the connecting rod and the uprights (notch) mm: 160 Dimensions of the mallet mm: 250x130 Worktable dimensions mm: 500x310 Minimum distance between worktable and mace with high adjustment and mallet all the way down mm: 275 Mace adjustment mm: 50 Adjustable stroke mm: 0÷60 Shank hole diameter mm: 40 No. strokes per minute: 155 Engine power KW: 1.5 Total mass Kg: 950 Operating voltage V: 380 Frequency Hz: 50 Dimensions mm: H=1890; L=1000; D=980 Lubrication pump motor power Kw: 0.09 Complete with user manual and CE compliance Warranty six (6) months excluding electronic parts. NEW COMPONENTS INSTALLED: - Front and side safety guards with safety keys; - Motor bearings; - Tang locks; - Flywheel bearings; - Flywheel belts; Lredpfx Abjttwfyj Ust - Work surface brightened on CNC machine

Condition: ready for operation (used), Pressing force: 1600kN, throat depth: 450mm, installation height: 560mm, ram stroke: 8-160mm, controls: SCHMERSAL SEPG 05.3.2.0.22/ 95, weight: 16.2t, including documentation. Lrsdpfjhz Ua Ssx Ab Ust

Condition: good (used), Year of construction: 1988, pressure 15 t throat 180 mm stroke 6 - 60 mm no. of strokes 145 Hub/min ram adjustment 40 mm table surface area 400 x 270 mm hole in the table 100 mm ram surface 120 x 100 mm Lsdpfx Aet Tqglob Ujrt dayligth 250 mm total power requirement 1,1 kW weight of the machine ca. 1150 kg dimensions of the machine ca. 0,96 x 1,34 x 1,88 m

Condition: refurbished (used), ECCENTRIC PRESS SGP TYPE : PEZZ 500/1700/1000 PRESSURE : 500t DOWN TABLE DIMENSIONS: 1700x1000mm Ledpfehqqnzjx Ab Uort LENGTH OF STROKE: 20-153mm DISTANCE BETWEEN RAM -TABLE: Min 700mm , Max 800mm WEIGHT: 40.000 kgr MADE IN AUSTRIA

Condition: excellent (used), Year of construction: 2006, machine/vehicle number: 12501, functionality: fully functional, pressing force: 10 t, table width: 222 mm, table length: 322 mm, overall weight: 450 kg, installation height: 197 mm, ram adjustment: 30 mm, stroke adjustment: 42 mm, Used San Giacomo eccentric press T 10V CE in very good condition, with a base frame for pallet truck transport. Further details available upon request. Lrsdpfxex A Ah To Ab Ujt

Condition: excellent (used), pressure 50 t throat 245 mm stroke 14 / 90 mm ram adjustment 75 mm table height adjustment 150 mm strokes per minute 42/85 table surface area 700 x 490 mm ram surface 400 x 230 mm tool hole in ram 40 mm hole in the table 240 x 140 mm daylight, max. stroke above - ram adjustment above 360 mm total power requirement 4 kW weight of the machine ca. 3,41 t dimensions of the machine ca. 0,8 x 1,75 x 2,1 m Machine was partially overhauled in our house as follows: - disassembly, cleaning and inspection - table milled over - new paintwork of the machine - shaft crack test carried out - disassemble Ortlinghaus clutch and additional brake, clean, check, replaceseals - additional air storage tanks - new control cabinet with safety control and touchscreen display - new wiring of the machine - new Vogel central lubrication system with piping - new Herion press safety valve + maintenance unit - new Balluff cam swith - new 2-hand control panel Lrodpetrhf Aefx Ab Ust - new footswitch - Current UVV test with braking time measurement - Machine safe for hand inlay work

Condition: refurbished (used), Year of construction: 2025, machine/vehicle number: A5137, functionality: fully functional, Refurbished 100-ton HEILBRONN C-press, currently undergoing retrofitting - available at short notice. Hydraulic clutch-brake combination, automatic central grease lubrication, manual ram adjustment, mechanical overload protection, new lubrication/hydraulic hoses, etc., new control system (adjustments still possible). Dimensions - see machine drawing as PDF. Lsdpfxewb A Dzj Ab Uert Technical specifications: Press force: 1,000 kN Speed: 50 rpm (variable speed optional) Variable stroke: 14 - 150 mm Ram adjustment: 80 mm Installation height: 420 mm (max. stroke at bottom, adjustment at top) Table: 650 x 500 mm Ram: 400 x 250 mm Thrust: 350 mm Drive power: 5.5 kW Approx. weight: 5,500 kg

Year of construction: 1978, condition: ready for operation (used), Offered for sale is a Schuler C-frame eccentric press. Press force: 40t, throat depth: 220mm, stroke range: 8mm-88mm, max. stroke rate: 160strokes/min, table area X/Y: approx. 630mm/430mm. Machine weight: approx. 2300kg. Inspection by prior arrangement is possible. Lrjdpjzrzpzefx Ab Uot

Year of construction: 1978, condition: ready for operation (used), A Schuler C-frame eccentric press is offered. Press force: 80t, throat depth: 280mm, adjustable stroke range: 20mm-160mm, max. stroke rate: 125strokes/min, table area X/Y: 700mm/560mm, slide area X/Y: 560mm/350mm, slide adjustment: 72mm, max. distance between table and slide: 510mm. Machine weight: approx. 4800kg. Inspection possible by appointment. Lsdpfjzrzpuex Ab Uert

Condition: good (used), Year of construction: 1998, functionality: fully functional, total length: 19,000 mm, total width: 19,000 mm, table width: 610 mm, overall weight: 8,500 kg, table length: 850 mm, power: 12 kW (16.32 HP), pressing force: 120 t, installation height: 300 mm, to visit under power Lsdjrwlxaopfx Ab Ujrt

Condition: excellent (used), Year of construction: 2003, Manufacturer: ROVETTA Year: 2003 Condition: Used Stock number: 0385 Pressing force: 630 tons Number of connecting rods: 4 Slide stroke: 300 mm Slide adjustment: 250 mm Die clearance at BDC: 950 mm Lsdpjxlh Rfefx Ab Ujrt Strokes per minute: 15/65 Maximum front opening: 5,200 mm Table dimensions: 5,000 x 2,630 mm Slide dimensions: 5,000 x 2,630 mm Main motor power: 132 kW

Year of construction: 2003, condition: used, machine/vehicle number: M00543, Rated force: 2,500 kN, rated power: 18.5 kW, machine weight: 25,000 kg, stroke rates in continuous operation: 19-57/min, max. stroke rates in single-stroke operation: 35/min, dwell time: 0.245 s, stroke length: 19-250 mm, max. installation space: approx. 480 mm, table size: approx. 900x1,200 mm, upstream light curtain, two-hand operation, separate control panel, control unit BEUTLER DATAPLUS 200. Ledpfxezqzc Ss Ab Uort

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, pressing force: 315 t, Equipment: documentation/manual, Bed size (x-y/mm) 2150 x 1200 Ram dimensions X-Y (mm) 2000 x 1200 Stroke (mm) 300 Slide adjustment (mm) 200 Strokes per minute 5 - 50 Side window dimensions (x-y/mm) 800 Motor power (kW) 34.5 Lodpfx Abozzw N Ns Uort

Year of construction: 1987, condition: used, pressure 40 t throat 270 mm stroke 4-100 mm no. of strokes 130 Hub/min ram - range of adjustment 80 mm table surface area 670x540 mm ram surface 460x300 mm hole in the table Ø 100 mm table height 850 mm Ledpfxop Sycto Ab Usrt tool hole in ram Ø 50 mm weight of the machine ca. 6 t dimensions of the machine ca. BxTxH 1500x2300x3300 mm

Condition: used, Year of construction: 1983, pressure 100 t throat 375 mm stroke 20-125 mm no. of strokes 60 Hub/min ram - range of adjustment 80 mm table surface area 920x660 mm ram surface 700x450 mm hole in the table Ø90 mm tool hole in ram Ø50 mm Ljdpfx Asxh Swhjb Usrt weight of the machine ca. 8 t dimensions of the machine ca. 2100x1500x3300 m

Condition: used, Year of construction: 1976, pressure 100 t throat 315 mm stroke 8 - 112 mm table surface area 725 x 570 mm ram surface 410 x 315 mm ram adjustment 80 mm no. of strokes 55 / 82 Hub/min tool shank hole (depth x diameter) 85 x 50 mm Lredpfx Abjugnpis Uot dayligth 355 mm total power requirement 7,5 kW weight of the machine ca. 6 t dimensions of machine L x W x H 2,00 x 1,00 x 2,87 m

Condition: used, Year of construction: 1976, pressure 400 t stroke 30 - 300 mm no. of strokes 55 /min Lsdpfx Aozrpqgsb Usrt throat 500 mm passage to the back 800 mm dayligth 950 mm table surface area 1580 x 1000 mm hole in the table 400 x 400 mm table height over floor 800 mm ram surface 1000 x 720 mm ram adjustment 125 mm power requirement 37,0 kW Weight 25,0 t dimensions (WxDxH) 2,5 x 3,1 x 5,1 m with motor, pneumatic clutch/brake combination, hydraulic overload protection in ram, semi-automatic stroke adjustment, motorized ram adjustment, pneumatic counterbalance in ram, fix table, motorized central lubrication, two-hand operation

Condition: new, pressure 30 t throat 200 mm stroke 0 - 60 mm table: 400 x 600 mm table: 150 mm - Bohrung no. of strokes 140 Hub/min bore 40,0 mm - Werkzeug compressed air max. 6,0 bar dayligth 300 mm total power requirement 3,0 kW weight 1.670 kg range L-W-H 1150 x 1350 x 2050 mm Furnishing: - Welded steel structure body frame - AISI 4140 (42CrMo4) alloy steel crankshaft - CNC ground for maximum precision SnBz-12 quality - Bronze bearings, ground for minimal surface resistance Lrsdpfexabvkox Ab Uet - 4 sides pneumatic clutch-brake combination - PLC control for safety (PILZ Germany) - Photo cell light barriers around the work table (PILZ Germany) - Two-hand and foot pedal control - Adjustable stroke - Central lubrication system - CE safety approval by TÜV - electrical equipment SIEMENS, SCHNEIDER, PHOENIX, OMRON

Condition: new, pressure 20 t Lrodpfxoxabrrs Ab Ust throat 200 mm stroke 0 - 50 mm table: 360 x 550 mm table: 140 mm - Bohrung no. of strokes 160 Hub/min bore 35,0 mm - Werkzeug compressed air max. 6,0 bar dayligth 240 mm total power requirement 2,2 kW weight 1.250 kg range L-W-H 1310 x 1250 x 1860 mm