Eccentric C-Frame press

HEILBRONN EP 35

Condition: used, Year of construction: 1988, Technical details: pressure: 10 t workpiece diameter - max.: 40 mm threading length: 70-80 mm workpiece diameter min/max: 3 / 40 mm revolution per minute: 47-94 U/min Lsdpfx Aow D Aq Tolyoah feed speed: 0,5 - 6 mm/s work stroke: max. 7 mm total power requirement: 4,68 kW Weight approx.: 1,4 t dimensions of machine: 1,4 x 1,4 x 1,7 B T H m dimensions of hydaulic: 0,8 x 1,2 m Hydraulic drive manual and automatic cycle adjustable roller speed max. thread diameter 40mm min. thread diameter 3mm up to 3.5 mm pitch max. pitch 1.75mm roller width min. 80 mm max. 120mm shaft speed 47-94 roller shaft diameter 40 various rollers as accessories *

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Lsdpfx Alouz If Noyeah Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: new, Model Name FALKEN R 1 Ljdpfegvqxtex Alyeah

Condition: used, Year of construction: 1981, x-travel 800 mm y-travel 500 mm z-travel 460 mm table surface area 1000 x 500 mm spindle taper SK 40 control HEIDENHAIN TNC 150 spindle turning speed range 31,5 - 3150 U/min Lodetqqplepfx Alyoah feeds longditudinal/cross/vertical 1 - 3000 mm/min rapid traverse longitudinal and cross 6 m/min rapid traverse vertical 4 m/min quill stroke 110 mm distance spindle nose and table max. 559 mm table load capacity max. 500 kg total power requirement 14 kW weight of the machine ca. 3,1 t dimensions of machine L x W x H 2,15 x 1,8 x 2,15 m Accessories: vertical head with hydr. tool clamping and quill retraction, solid table, coolant

Condition: ready for operation (used), An automated tube bending system with two Wafios bending heads and a Kuka twister robot is available. 1) Bending head Wafios RB20, bending direction: left and right, max. total tool height: 78mm, bending capacity: 360Nm, bending speed: 560°/s, bending radius: 57mm, repeat accuracy bending, turning and feed: +/-0.05mm. 2) Robot Kuka KR 16-2 KRC 2, axes: 6, payload: 16kg, max. reach: 1611mm, repeat accuracy: +/-0.05mm, weight: approx. 235kg. Including suspended magazine, Kuka control cabinet, outfeed conveyor, safety fence, movable control panel, docking station and work table. Documentation available. On-site inspection is possible. Lasdpfx Alswwlkieyeh

Condition: used, Year of construction: 1991, Pressing force 1,500 kN Adjustable stroke 20 - 132 mm Ram adjustment max. 90 mm Lodpfxerm Nqms Alyoah Stroke rate 50 / 75 strokes/min. Further data and images available upon request Used, the press was completely disassembled Not operational and requires mechanical and electrical overhaul Press is currently mechanically reassembled

Condition: new, Year of construction: 2025, Power at 50%: 35kVA Short circuit-current: 19kA Electrode force: 300daN / single stroke Throat depth: 395mm --- Weld control: WS 708 (7-times, 8-program) --- Extra Equipment: Laodpfx Alskti Hzoyeh - foot pedal - main switch --- Warranty: 6 months --- Spotwelding electrodes + spare parts at stock

Condition: used, Roll sets for profile bending machine, 3-roller ring bending machine HERKULES WETZLAR The rollers are suitable for a HERKULES WETZLAR profile bending machine, type BO 238 N. Shaft diameter: 60 mm with an 18 mm keyway. 2 pieces, roller set No. 1, roller diameter 110 mm, roller width = 180 mm. 2 pieces, roller set No. 2, roller diameter 160 mm, roller width = 40 mm. 3 pieces, roller set No. 3, roller diameter 150 mm, for pipe diameter Ø 33 mm, roller width 87 / 115 mm. - Roller set No. 3 with adapter ring from Ø 93 to Ø 60 mm, without keyway. Lajdsglaq Ispfx Alyjh The machine had 2 driven rollers. Total weight of all rollers: 57 kg. Good condition.

Condition: new, Year of construction: 2024, load capacity: 300 kg, Welding rotary table KT 300 Lajdpfx Aoc Ug Tlolysh Horizontal load capacity: 300 kg, tilted: 150 kg Power supply: 220 V, 50 Hz Table diameter: 450 mm Height: 500 mm Tilting range: continuously adjustable via crank gear motor, 0 - 90° Speed: 0.3 to 2.5 RPM Includes foot pedal remote control Optional extra: Quick-release chuck Diameter: 300 mm, €450

Condition: new, Year of construction: 2025, Band width: max. 38 mm Feed length: max. 50 mm Band thickness: 0.05...1.02 mm Stroke rate: max. 260 strokes/min at full feed length Feed force: 90 N Ljdpfj Ea U Hex Alyeah Available with a mechanical control valve or optionally with an electric valve (24V or 230V). Many other band widths and feed lengths are available.