Used High-Performance Industrial Vacuum Cleaner for sale (44,735)

Condition: as good as new (ex-display), Year of construction: 2025, High-pressure cleaning unit, high-pressure jetting unit, high-pressure inbuilt cleaner mounted on a hot-dip galvanized and painted high-grade steel frame with forklift sleeves, suitable for installation in commercial vehicles. Similar to PTC Salmon but not Feierabend & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rom, Rowo, etc. The following models are available: Salmon 60/200 | 60 l/min at 200 bar | Engine: Vanguard 35 HP 26 kW Salmon 75/150 | 75 l/min at 150 bar | Engine: Vanguard 35 HP 26 kW Salmon 30/300 | 30 l/min at 300 bar | Engine: Vanguard 35 HP 26 kW Salmon 45/240 | 60 l/min at 200 bar | Engine: Vanguard 35 HP 26 kW DIMENSIONS / WEIGHT: Dimensions without water tank (LxWxH): approx. 760 x 1,250 x 1,200 mm Dimensions with 400 l water tank (LxWxH): approx. 1,220 x 1,250 x 1,200 mm Rodpfx Ajf Arugeguecb Dimensions with 800 l water tank (LxWxH): approx. 1,670 x 1,250 x 1,200 mm Dry weight without water tank: approx. 300 kg Dry weight with 400 l water tank: approx. 320 kg Dry weight with 800 l water tank: approx. 350 kg HIGH-PRESSURE PUMP: - Manufacturer: HPP - Model: CLW ENGINE: - Manufacturer: Vanguard - Model: 35 HP - Fuel: Petrol - Max. Power: 35 HP (26 kW) CONTROL PANEL: - Start button - Operating hours counter - Electronic fuel gauge - LED indicator for oil temperature - LED indicator for low oil pressure - LED indicator for clogged air filter - LED indicator for RPM - LED indicator for generator - LED indicator for spark plugs - Emergency stop button ELECTRICAL CONTROLS: - Hydraulic hose reel wind/unwind - Bypass On/Off - Speed control +/- - Emergency stop button - Switch to radio remote control INSTALLED ALARM: - Water shortage safety system to prevent the high-pressure pump from running dry with automatic shutoff. SAFETY AND PRESSURE REGULATING VALVES: - The unit is equipped with a safety valve, a pressure regulating valve, and a pressure gauge. HIGH-PRESSURE HOSE REEL: - Type: Electric hose reel - Material: Stainless steel - Capacity: max. 80 m ½” and 80 m 3/8" high-pressure hose - Hose: 80 m ½” high-pressure hose (included) - Hose guide: manual LOW-PRESSURE WATER SUPPLY HOSE REEL: - Type: Manual hose reel - Material: Stainless steel - Capacity: max. 35 m ¾” low-pressure hose - Hose: 35 m ¾” low-pressure hose (included) WATER FILTER: - With washable cartridge and drain valve. - Filtration grade: 50 mesh INCLUDED IN DELIVERY: - Multifunctional IMET radio remote control; - Engine On/Off; - Bypass On/Off; - Speed control +/-; - Hydraulic hose reel wind/unwind; - Emergency stop button; - Battery charger for remote control; - 300, 400, 500, or 800 l polyethylene water tank (with steel frame); OPTIONS ON REQUEST: - Pulsation/booster pump; - 50 or 60 m ½” high-pressure hose; - 50, 60, or 80 m 3/8” high-pressure hose with G3/4” connection; ACCESSORIES ON REQUEST: - STORZ kit for connection to a hydrant; - UNI 45 kit; - Version with 2 high-pressure reels; - Mobile hot water generator 10 kW – 12 VDC; - High-pressure spray gun kit with swivel joint and quick coupling; - High-pressure lance kit with fan nozzle 15° / rotating nozzle; - High-flow lance kit; - Rotating nozzle kit; - Twin-head nozzle kit; - Water sandblasting lance kit; - Detergent dispenser kit; - Step cleaning device; - Surface cleaner; - Sludge suction device (Venturi); - Pipe cleaning nozzles; - Further accessories upon request

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, High-Pressure Cleaning Unit, High-Pressure Jetting Unit, High-Pressure Built-in Jetting System on a hot-dip galvanized and painted high-quality steel frame with forklift pockets, suitable for installation in commercial vehicles. PTC Whale 36/210, 43/180 or 55/160, similar but not Feierabend & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rom, Rowo,... The following models are available: Whale 30/250 | 30 l/min at 250 bar | Engine: Honda GX630 14.7 kW Whale 36/210 | 36 l/min at 210 bar | Engine: Honda GX630 14.7 kW Whale 43/180 | 43 l/min at 180 bar | Engine: Honda GX630 14.7 kW Whale 55/160 | 55 l/min at 160 bar | Engine: Honda GX690 17.7 kW DIMENSIONS / WEIGHT: Dimensions without water tank (LxWxH): approx. 650 x 1,000 x 1,030 mm Unladen weight without water tank: approx. 250 kg Dimensions & unladen weight with 300 l water tank: approx. 1,160 x 1,000 x 1,030 mm & approx. 280 kg Dimensions & unladen weight with 500 l water tank: approx. 1,260 x 1,000 x 1,030 mm & approx. 300 kg HIGH-PRESSURE PUMP: - Manufacturer: COMET - Model: TW 13022S Premium ENGINE: - Manufacturer: Honda - Model: GX 690 - Fuel: Petrol - Cooling: Air - Cylinders: 2 - Displacement: 688 cm³ - Max. output: 24 hp (17.7 kW) - Max. engine speed: 3,600 rpm TRANSMISSION: Gearbox housing CONTROL PANEL: - Ignition key - Hour meter - Electronic fuel gauge Rcedsdqmttopfx Agujb - LED indicator for low oil pressure - Emergency stop button INSTALLED ALARM: - Water shortage protection to prevent high-pressure pump running dry, with automatic shut-off function. SAFETY AND PRESSURE CONTROL VALVES: - The unit is equipped with a safety valve, a pressure regulating valve, and a manometer. HIGH-PRESSURE HOSE REEL: - Type: manual hose reel - Material: stainless steel - Capacity: max. 60 m ½” high-pressure hose - Hose: 50 m ½” high-pressure hose (included) LOW-PRESSURE WATER SUPPLY HOSE REEL: - Type: manual hose reel - Material: stainless steel - Capacity: max. 35 m ¾” low-pressure hose - Hose: 35 m ¾” low-pressure hose (included) FUEL TANK: - Capacity: approx. 13 l WATER FILTER: - With washable cartridge and drain valve - Filtration: 50 mesh SCOPE OF DELIVERY: - IMET multifunction radio remote control; - Engine On/Off - Bypass On/Off - Electronic speed control +/- - Emergency stop button - Battery charger for remote control - 300, 400 or 500 l polyethylene water tank OPTIONS ON REQUEST: - 60 m ½” high-pressure hose - Pulsation/booster pump - Second high-pressure hose reel - Electric high-pressure hose reel (requires connection to vehicle battery) ACCESSORIES ON REQUEST: - STORZ kit for hydrant connection - UNI 45 kit - Mobile hot water generator 10 kW – 12 VDC - High-pressure spray gun kit, swivel and quick coupling - High-pressure lance kit with 15° flat jet nozzle / rotary nozzle - High-flow lance kit - Rotary nozzle kit - Twin-head nozzle kit - Water sandblasting lance kit - Detergent dispenser kit - Step cleaning device - Surface cleaner - Sludge suction device (Venturi) - Pipe cleaning nozzles - Further accessories available on request

Condition: as good as new (ex-display), Year of construction: 2026, The CE08 series is an electrically powered high pressure cleaner. This model is the ideal tool for general cleaning jobs. Built into a stainless steel frame, this robust pressure washer is easy to move and can be equipped with various accessories such as rotor nozzles, chemical injectors and a sandblasting kit. Similar but no Dynajet, Falch, Kärcher, Oertzen, etc. Models available: ----- CE08-series L/min CE08-200 bar 15 7,5 hp water blaster unit 50Hz CE08-200 bar 15 7,5 hp water blaster unit 60Hz CE08-200 bar 15 7,5 hp water blaster unit 50Hz with start/stop CE08-200 bar 15 7,5 hp water blaster unit 60Hz with start/stop General specifications: ----- Drive motor power: 6.0 kW Volt: 400V (50Hz) - 440V (60Hz) Amp: 12.8A (50Hz) - 12.3A (60Hz) Dimensions: 690 mm x 560 mm x 900 mm Rsdehf Nakepfx Aguscb Weight: 70 kg Standard accessories included.

Condition: refurbished (used), Year of construction: 1975, functionality: fully functional, CANALI Vertical Automatic High-Performance Block Bandsaw Model BBS.V "PACIFIC" K/L-B-P 1800, Type 555, Year 1975 with operator control system in the cabin, Bandsaw wheels Ø 1800 mm, bandsaw wheel width 280 mm, Max. saw blade width 310 mm. Bandsaw blade length 11,500 mm Round timber infeed approx. 20 m long, four strands with inserter Block carriage with ejector onto block transverse conveyor CANALI pneumatic log carriage Type 501.09 with 4 clamping claws, 3 log turners, 4 ejectors Drive power 100 kW, carriage speed 5-120 m/min. driven roller conveyor with side board removal with brush, lifter with stripper for cut-out removal Roller conveyor approx. 12 m with lifting stripper for manual stacking Stacking device with turning unit for bundle packaging Lowerable bundle with transverse bundle conveyor Complete electrical control cabinets Rodpfxexvrnis Aguocb Full band saw blade sharpening equipment

Condition: used, functionality: fully functional, mileage: 52,441 km, power: 101 kW (137.32 HP), first registration: 10/2007, overall weight: 7,000 kg, fuel type: diesel, color: white, axle configuration: 4x2, operation weight: 4,520 kg, empty load weight: 4,520 kg, fuel: diesel, driver cabin: day cab, gearing type: mechanical, emission class: euro4, suspension: steel, Year of construction: 2007, Equipment: ABS, High-pressure cleaner on transporter: + Nissan + Atleon 70.14 + 52,441 km + 5-speed manual transmission + 4-cylinder Cummins diesel engine, 4462cc; 101kW, type ISBe4-140 + 3-seater + electric windows + analog tachograph + heated mirrors Rsdpfx Agewyvvzouecb + rearview camera + radio/CD + rear window + driver comfort seat + warning beacons + length: 598cm + unladen weight: 4,520kg; gross vehicle weight: 7,000kg High-pressure water system: + 4-cylinder Lombardini diesel engine, type LDW 2214, 2199cc; 65 HP + General Pump, type TS1511, 3500 PSI + electric throttle control + electric hose reel rewinding + 1x high-pressure lance + 2-chamber water tank, approx. 3,000L (180cm x 200cm x 85cm) Municipal vehicle from first owner Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and omissions excepted, subject to prior sale!

Condition: excellent (used), GEA CFS OptiCoater 600 batter enrober available for immediate sale. Rodpfjx Hak Nex Agujcb

Condition: good (used), Year of construction: 2017, Gasoline-powered high-pressure cleaner in tubular frame. Extremely robust. Ideal for construction sites where there is no electricity yet. Redpfx Ask Dz R Tsguecb 100% ready for use. High quality Honda engine. High pressure hose and blasting unit in top condition. Shipping within Germany possible. Transport costs about 110.-€ plus VAT. The device can be visited at any time and tried on site. Technical data: Pressure: 150bar Delivery rate: 650 liters / hour weight: 39,5kg more info's in the attached data sheet

Condition: excellent (used), Year of construction: 2023, Ruwac Wet & Chip Vacuum Cleaner - Year of manufacture: 2023 - Fully functional - Hose & nozzles included Dimensions: Rcsdpfx Agjyc Hm Usueb LxWxH 1.2x0.7x1.4 meters / Weight approx. 120 kg Subject to errors and omissions.

Condition: reconditioned (used), Year of construction: 2017, operating hours: 1,651 h, functionality: fully functional, machine/vehicle number: G393, operating pressure: 500 bar, total length: 1,175 mm, total height: 945 mm, total width: 760 mm, pressure: 500 bar, type of input current: three-phase, empty load weight: 290 kg, input voltage: 400 V, power: 15 kW (20.39 HP), input current: 32 A, noise level: 78 dB, pressure (max.): 500 bar, input frequency: 50 Hz, water pressure: 500 bar, Dear Sir or Madam, Rjdpfx Ajxugifjguecb For sale is an overhauled Falch WheelJet 15 Electric without accessories. 500 bar 15 l/min 32A plug Best regards, STS-Reinigungstechnik Team

Condition: good (used), Shrink tunnel from a German manufacturer: -Tunnel opening approximately 500 x 200 mm. -Temperature adjustable up to 250 degrees and transport speed up to 25 m / min. -Choice of fixed or co-rotating tunnel bars. -By means of deflectors, the hot air streams at the top and in the middle can be adjusted separately. Rcjdpfx Agoh U A I Rsueb -Bottom air can be switched on separately. -The machine can be pushed or fixed in place by means of lockable castors.

Condition: good (used), Year of construction: 2019, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, cutting height (max.): 1,300 mm, cutting width (max.): 1,800 mm, total length: 8,000 mm, total width: 4,000 mm, table height: 700 mm, feed length X-axis: 8,000 mm, feed length Z-axis: 1,300 mm, feed rate X-axis: 70,000 m/min, saw band speed: 1,00,000 mm/s, table length: 3,000 mm, table width: 1,300 mm, working height: 700 mm, HEMA CoreCutter 900 from our test center - High-performance horizontal band saw - Ultra-precise slicing of blocks into sheets down to a minimum thickness of approx. 1 mm - Vacuum table for precise workpiece clamping - Dynamic servo axes for maximum productivity - 6 years of operation in the test center - Ideally suited for cutting lightweight construction blocks made from aramid, Nomex, Kevlar, balsa, PET, PVC, PMI, PU, and many more - General overhaul at the manufacturer's facility available upon request Gantry - Steel construction - 2x linear guide units per column - Servo motor with ball screw drive per side - Bellows cover for guides and spindles - Signal tower (red/yellow/green) on gantry control Control System - Control cabinet with climate control - Siemens PLC - Frequency-controlled drives - WAGO IO-Link modules - Operator panel with 12-inch screen, integrated into the control cabinet Paintwork - HEMA standard, grey RAL 7031/7047, signal red RAL 3001 Rcjdpfx Agjwifxdsujb Technical Data: - Wheel diameter 2x 900 mm - Table length 3,000 mm - Overall machine length max. 8 m - Cutting width approx. 1,800 mm - Cutting height/vertical stroke approx. 1,300 mm - Cutting height (saw blade – extraction hood) approx. 300 mm - Band drive 400 V, 50 Hz, 22 kW - Continuously variable band speed 500 – 6,000 m/min - Table feed rate max. 70 m/min - Compressed air 6 bar

Condition: used, Year of construction: 2023, Cutting area: 5600x5600 mm 1x Gabbiani G 3 130 (56) - High-performance panel saw 1x Compact label printer 1x "eye-M EVO" operating console 1x Human-machine interface software (HMI) MAESTRO ACTIVE 1x Maestro Pattern 1x High-performance fixed air cushion table with guide, 2500x600 mm, with infeed rollers 3x High-performance movable air cushion table - 2500x600 mm, with infeed rollers 1x Double lateral automatic aligner with motor drive 1x Foot switch for START/STOP of operating cycle 1x Grooving device with height-adjustable saw blade via control system 1x "Autosetting" device on the saw carriage for cut length/width 1x Main saw blade motor 25 HP (18 kW) 50 Hz with star-delta starter 1x Quick-clamping of saw blades with mechanical "AKE" flanges 1x Selective collet closure (area 0 - 1600 mm) 3x Additional double collets 4x Additional single-finger collets 1x Compact office label printer 1x Cut editor 1x Maestro Optiwise - Advanced - No. 1 license 1x Maestro Connect: service contract for 1 year (including "plug & play" gateway kit) 1x Base 1x MACHINE LANGUAGE: German 1x PC LANGUAGE: GERMAN 1x SPEC01 special version 01 Redjxlvktepfx Aguocb 1x European safety regulations (CE marking) Including 123 hours of on-site commissioning (within Germany) (daily working time is 8 hours including travel time). Includes 1 day online training for MAESTRO OPTIWISE PRO (as required) Includes 1 year MAESTRO CONNECT Includes MAESTRO PATTERN IMPORT (normally €255 - free of charge) Location:

Condition: good (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 3520191300779, operating pressure: 220 bar, input voltage: 400 V, overall weight: 85 kg, The Nilfisk MC 5M is equipped with a hose reel and a new rotor nozzle. The water pressure can be adjusted using a dial on the high-pressure cleaner. It is extremely maneuverable and a so that it can also be used on the move in everyday work. Rcjdjuwlxfjpfx Agueb Technical data Pressure: 220 bar Cleaning effect: 6.2 Max. Inlet temperature: 60 degrees Dimensions: 890x570x1020 (length x width x height ) in mm Weight: 85

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 2 h, functionality: fully functional, The Henry Quick cordless vacuum cleaner from Numatic is a display item in mint condition. The battery life is approx. 60 minutes and carpets can be cleaned effectively with the electric turbo nozzle. Redpfx Ajuiyg Eeguscb The stand / column can be purchased for an additional charge. Technical data: Running time: approx. 60 minutes Motor: 300 watts Filter bag capacity: 1 liter Weight: 3.2 kg

Condition: used, Year of construction: 2020, machine/vehicle number: 525, powerful vacuum cleaner for dusts, smoke, chips suction power 7.58 m³ / min vacuum 520 mbar air demand 3.25 m³ / min suction nozzle NW 76 mm suction hose 5.5 m collection container 60 litres HEPA safety filter cartridge 2.2 m² - dust class H Rjdpep Sczbofx Aguscb space requirements length - 1,100 x width - 680 x height - 2,200 mm weight approx. 130 kg

Year of construction: 2005, condition: used, stable hose reel for tough and extremely challenging applications stable durable and extremely corrosion-resistant for air, water (oil and grease) diameter of hose connection 12.5 mm (1/2 ") hose length max. 20 m possible open version housing made of cast aluminium, lacquered in space-blue  hose drum ball bearing mounted made of cast aluminium, lacquered in space-blue  Rcedsh A Sfljpfx Agusb can be mounted either on wall, floor or ceiling safety lock for hose drum drum bearing encapsulated drum locking mechanism sixfold rotary transmission made of brass oder brass / stainless steel  hose stop included in scope of delivery  hose outlet via 6 rolls, steplessly adjustable spring drive encapsulated max. pressure: 1.5 MPa (15 bar) hose connections: sppit with hose clamp with rubber hose, cord reinforced temperature max. 80° C space requirements depth - 760 x height - 560 x width - 320 mm weight approx.  32 kg original price approx. ? 1,600.00  - 9 units on stock -

Year of construction: 2005, condition: good (used), Technical data: - Drilling capacity in steel ST 60 30 mm - Drilling spindle holder MK 3 - Feeds - drill spindle stroke 120 mm - Drilling spindle speeds infinitely variable 80 - 1400 rpm - Throat 260 mm - max. distance table - drilling spindle 760 mm - Table with 2 T-slots 500 x 350 mm - Height adjustable via gear rack with crank handle - Drive 400 V / 0.7 / 1.3 kW - Space requirement approx. W 500 x H 1900 x D 850 mm - Weight approx. 260 kg Rcsdpfx Agof A Dywoujb - with: - drill chuck 3-12 mm - Lighting

Year of construction: 1992, condition: good (used), machine/vehicle number: 144202, Technical data: - Drilling capacity in steel ST 60 32 mm - Thread cutting device up to M 20 - Drilling spindle holder MK 3 - feeds 0,1 + 0,2 + 0,3 mm/rev - Drilling spindle stroke 150 mm - 12 drilling spindle speeds 80 - 1400 rpm - throat 280 mm - max. distance table - drilling spindle 760 mm - Table with 2 T-slots 550 x 400 mm - Height adjustable via toothed rack with hand crank Rcsdpfx Aegbykrsguob - drive 400 V / 1,4 / 2,3 kW - Space requirement approx. W 550 x H 1950 x D 850 mm - Weight approx. 360 kg - with: - coolant device - quick-action drill chuck - 20 pcs. HSS div. drill bits 8 - 25 mm

Condition: good (used), Year of construction: 1998, machine/vehicle number: 3815-130-3235, Offer 25380 Technical Data: - Drilling capacity in steel ST 60: 40 mm - Maximum drilling capacity in steel ST 60: 50 mm - Tapping capacity in steel ST 60: up to M 42 - Spindle taper: MK 4 - Spindle stroke: 200 mm - Spindle speeds steplessly adjustable: 40 – 1100 rpm - Right and left-hand rotation - 3 automatic feeds: 0.1; 0.16; 0.25 mm/rev - Throat depth: 350 mm Rcsdpsxr Ayhjfx Agusb - Max. distance spindle – table / baseplate: 790 / 1210 mm - Table with 2 T-slots: 630 x 540 mm - Table height adjustable via rack with hand crank - Drive: 400 V / 1.6 / 2.9 kW - Required floor space approx.: W 600 x H 2050 x D 980 mm - Weight approx.: 650 kg - Includes: - Tapping device - Quick-action drill chuck 1–13 mm - Emergency stop button - Work light - Coolant device

Condition: good (used), Year of construction: 2017, machine/vehicle number: 0371, Offer 25146 Redpfx Aoxtapioguscb Technical Data: - Portable design suitable for CrNi steels - Air flow rate: approx. 200 m³/h - Max. negative pressure: 19,000 Pa - Filter surface area: approx. 0.8 m² - Filter separation efficiency: 99.9% - Extraction connection: 60 mm - Extraction hose: 6 m - EWM torch package, water-cooled with extraction function: 4 m - Automatic start-stop - Dust drawer - Drive – fan: 230 V / 1.1 kW - Space requirement: approx. W 650 x H 600 x D 250 mm - Weight: approx. 25 kg

Condition: good (used), Year of construction: 2017, machine/vehicle number: 0381, Offer 25147 Technical Data: - Portable design suitable for CrNi steels - Air flow rate approx. 200 m³/h - Max. negative pressure 19,000 Pa - Filter surface area approx. 0.8 m² - Filter separation efficiency 99.9 % - Extraction connection 60 mm - Extraction hose 5 m - Water-cooled torch package with extraction function 4 m - Start-stop automatic Redoxtatzjpfx Agujcb - Dust drawer - Drive - Fan: 230 V / 1.1 kW - Required space approx. W 650 x H 600 x D 250 mm - Weight approx. 25 kg

Condition: used, Year of construction: 1980, machine/vehicle number: 258695, Lg.no. 24444 Technical data: - E.- Hydr. raising/lowering of the saw bow - Saw blade dimensions 400 x 30 x 1.5 mm - Cutting range at 90° - round approx. 210 mm - flat approx. 240 x 190 mm - square approx. 210 x 210 mm - Cutting range at 45° - round approx. 150 mm - flat approx. 150 x 100 mm - approx. 130 x 210 mm - square approx. 145 x 145 mm - Adjustable stroke speeds + cutting speeds Rodpfeu H Acysx Aguocb - Stroke speeds 62 / 125 m/min - Average cutting speed 16 / 32 m/min - Mitre-adjustable vice with opening width up to 260 mm - E.-Mot. coolant device - Drive 400 V / 1.1 kW - Space requirement approx. W 600 x H 1250 x D 1300 mm - Weight approx. 250 kg

Year of construction: 1968, condition: good (used), machine/vehicle number: 12314, Offer 22326 Technical data: - Drilling capacity in steel ST 60 35 mm - drilling capacity in steel ST 60 40 mm - Drilling spindle holder MK 4 - drilling spindle stroke 170 mm - throat 345 mm - rotary table with 2 T-slots 550 mm - max. distance table - drilling spindle 650 mm - max. distance base plate - drilling spindle 1000 mm - feeds 0,09 - 0,16 - 0,28 mm/rev. - AZ gearbox stepless with gearbox - drilling spindle speeds infinitely variable 40 - 720 rpm Rjdjkt Nqqopfx Aguocb - right. - counterclockwise rotation - drive 400 V / 2,5 kW - illumination - coolant equipment - Space requirement approx. W 750 x H 1950 x D 1000 mm - Weight approx. 700 kg

Condition: used, Year of construction: 1989, machine/vehicle number: 19216, Lg.no. 22614 Rsdpfx Ajt Etiysguocb Technical data: - Drilling capacity in steel ST 60 40 mm - Drilling capacity in steel ST 60 50 mm - Drill spindle holder MK 4 - Drill spindle stroke 180 mm - Drill spindle speed infinitely variable with reduction gear - Stage 1 60 - 210 rpm - Stage 2 210 - 765 rpm - throat depth 330 mm - 3 feeds 0.1 - 0.2 - 0.3 rpm - Table with 2 T-slots 720 x 360 mm - Table height adjustable via rack and pinion with hand crank - max. distance table - drilling spindle approx. 780 mm - max. distance machined base plate - drilling spindle approx. 1250 mm - Coolant device - Lighting system - Drive 400 V / 4 kW - Space requirement approx. W 720 x H 2050 x D 1150 mm - Weight approx. 500 kg

Condition: used, Year of construction: 1995, machine/vehicle number: 953003, Order No. 25072 Technical Specifications: - Drilling capacity in steel ST 60: 40 mm - Drill spindle mount: MT 4 - Drill spindle stroke: 150 mm Rodpfx Aov Uy Npsguscb - Drill spindle speed: infinitely variable rpm - Throat depth: 350 mm - Max. distance between drill spindle and table: 580 mm - Table with 2 T-slots: 600 x 450 mm - Height adjustable via gear rack and hand crank - Table tiltable left and right - Drive: 400 V / 3 kW - Space required: approx. W 700 x H 1950 x D 950 mm - Weight: approx. 650 kg - With: - Machine vise - Keyless drill chuck: 1-13 mm - Lighting