Used Ihc Iqip Hydraulic Hammer for sale (15,516)

Condition: good (used), Year of construction: 2006, sheet width 2050 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 2100 mm Bedpeznngxofx Aikswr down holder 12 Stück no. of strokes max. 26 Hub/min cutting angle 1.6 ° back stop - adjustable 750 mm Control ELGO oil volume 120 ltr. total power requirement 11.0 kW weight 3900 kg range L-W-H 2860 x 2100 x 1560 mm with only approx. 400 operating hours (!!) Original price approx. 30.000 euros Special price upon request Features: - Robust electro-hydraulic oscillating shear - ELGO digital display, Model P9521, * for electric backgauge - NC-controlled electric motor-driven material/backgauge * Travel range continuously adjustable backgauge X = 750 mm * Backgauge with backlash-free ball screw * Travel speed: 100 mm/sec - 1x sturdy side stop * with T-slot and millimeter scale - 1x sturdy support arm - Electric cut length limiter * Cut length limiter to increase the number of strokes per minute - Manual kerf adjustment * Operated centrally from the right-hand side stand - Front support plates with ball bearings - Front finger/interference guard - Jog mode with push buttons on the left control panel - Protective guard = safety device behind the machine - Operating instructions (PDF)

Condition: good (used), Year of construction: 1996, sheet width 3050 mm plate thickness 6.5 mm Bodpfx Aozndq Toikewr thickness at "Niro-steel" 4.0 mm back stop - adjustable 750 mm work height max. 770 mm no. of strokes 11 - 22 Hub/min cutting angle 0.5 - 3.0 ° down holder 18 Stück Control SC 5 voltage 380 V engine output 11.0 kW weight of the machine ca. 5000 kg range L-W-H 3950 x 1750 x 1720 mm Features: - Electro-hydraulic / slide-guided panel shear - HACO NC control, Model SC 5, front left * Preset positioning of the backgauge * Digital display of actual position * Electro-hydraulic cutting angle adjustment * Electro-hydraulic cutting gap adjustment * Programmable retraction of the backgauge * Emergency stop switch - Electromotor-driven backgauge, mounted on ball screws - Hydraulic sheet metal hold-down devices - Front finger guard - 1x long side stop - 1x freely movable foot switch - Operating instructions in German (PDF)

Condition: good (used), Year of construction: 1994, machine/vehicle number: 94102, Offer 26181 Technical Data: - max. working width 2540 mm - max. cutting capacity St 40 10 mm - Cutting angle adjustable, motorized 0.5 - 3 ° - Manual cutting gap adjustment - Number of hydraulic clamping cylinders 15 pcs - Motorized rear stop with positioning control 10 - 1000 mm - Front angle stop - Stroke rate depending on cutting angle and cutting length 7 - 17 strokes/min - Hydraulic drive 400 V / 15 kW - Table height 770 mm - Space requirement approx. W 4100 x H 2030 x D 2030 mm Bsdpfjzruf Nox Aikowr - Weight approx. 7500 kg - Including: - Electronic foot switch - Cutting line illumination

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, power: 26 kW (35.35 HP), pressing force: 230 t, stroke length: 470 mm, throat depth: 400 mm, clearance between the columns: 2,550 mm, total width: 3,750 mm, total height: 3,750 mm, overall weight: 16,200 kg, Equipment: CE marking, Hydraulic press brake Manufacturer: DARLEY, Type: EHP-LS 230.31/25 Year of manufacture: 2003 Technical data Manufacturer: DARLEY Type: EHP-LS 230.31/25 Year of manufacture: 2003 Capacity: 230 t Usable length: 3,100 mm Bwjdpfx Aijzmi Hqsksr Distance between uprights: 2,550 mm Stroke: 470 mm Installation height: 700 mm Upright overhang: 400 mm Motor power: 26 kW Oil tank capacity: 200 liters Weight: 16.3 t Dimensions: Width 3,750 mm x Depth 2,700 mm x Height 3,550 mm (plus 200 mm for the control arm) Equipment • Control system: Delem DA-66W • Automatic Wila/Trumpf tool clamping system + tool holders (top and bottom) • Controlled axes: Y1, Y2, X1, X2, R1, R2, Z1, Z2 • CNC-controlled crowning • Lazersafe safety light curtain (front) • Rear safety guard via door/grille • 2 adjustable support arms • • Tool set: Top tool: straight, H 158 mm, R3, 28°, 100 t/m, 3000 mm, segmented Top tool: slightly bent, H220 mm, R1, 86°, 2000 mm, segmented All information is subject to change without notice. A demonstration is possible at any time in our showroom.

Condition: ready for operation (used), Year of construction: 1991, A BÊCHÉ hydraulic short-stroke die forging hammer is offered for hot forming and die forging of workpieces. Working capacity: 16kJ, continuous blow frequency at full load: approx. 32/min-38/min, max. blow frequency: 122/min, final ram velocity: 5.1m/s, main drive pump flow rate: 187.5l/min, circulation pump flow rate: 120l/min, oil capacity in the drive head: 550l, clear width between the guides: 520mm, working height to upper edge of insert: 750mm, ram depth: 470mm, insertion depth: 550mm, die height min./max.: 120mm/320mm. Total weight: approx. 23.2t, anvil bed, overall dimensions X/Y/Z: approx. 1485mm/825mm/4552mm, max. space requirement/foundation dimensions X/Y: approx. 3350mm/3300mm. An on-site inspection is possible. Bodpfx Aszrhhwjikowr

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, actuation type: hydraulic, controller manufacturer: Siemens, controller model: Smart Line, number of rollers: 4, roller (bottom) diameter: 190 mm, roller (top) diameter: 210 mm, side roll diameter: 180 mm, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, power: 11 kW (14.96 HP), input voltage: 400 V, number of digital displays: 1, warranty duration: 12 months, Equipment: documentation/manual, emergency stop, DIGIMA W12-8x3200 Hydraulic Four-Roll CNC Plate Rolling Machine The DIGIMA W12-8x3200 is a hydraulic four-roll CNC plate rolling machine designed for accurate, repeatable and efficient sheet-metal forming. With a working width of 3200 mm, it is suitable for producing large cylindrical parts, sleeves, pipes, curved sections, housings, tanks and other technical components used in metalworking, steel construction, ventilation, machinery manufacturing and industrial production. The four-roll system provides a major advantage over conventional three-roll machines. The sheet is held securely between the upper and lower rolls, while the two side rolls perform the pre-bending and rolling operations. This arrangement allows both edges of the sheet to be pre-bent without removing and turning the workpiece, reducing handling time and limiting the length of straight sections left at the ends. The result is improved repeatability, higher productivity and more consistent part geometry. The W12-8x3200 can roll sheet metal up to 8 mm thick and perform pre-bending up to 6 mm. Its 3200 mm working length enables the processing of wide sheets for both one-off jobs and series production. The upper roll has a diameter of 210 mm, the lower roll 190 mm, and the side rolls 180 mm. The minimum rolling diameter is 400 mm, allowing the machine to produce a wide range of cylindrical and curved components. The hydraulic drive ensures smooth, stable movement and reliable clamping force throughout the forming process. The 11 kW motor provides the power required for regular industrial operation, while the rolling speed of 4 m/min supports efficient production without compromising process control. The rigid machine body and carefully arranged roll system help guide the material accurately and reduce unwanted deformation. Computerised CNC control makes the machine convenient to set up and operate. The operator can control roll movements, monitor the forming process and reproduce previously established settings for recurring jobs. This is especially useful in batch production, where the same diameter, radius and dimensions must be achieved repeatedly. The control panel also helps reduce setup time and simplifies everyday machine operation. Bwjdeznw T Uepfx Aiker The operating sequence is straightforward. First, the sheet is inserted and stabilised between the rolls. The side rolls then pre-bend the sheet edges, minimising flat ends. Finally, the material is passed through the roll system until the required tube, sleeve, arc or cylindrical shape is obtained. The machine can also be used for forming conical components by applying a controlled inclination of the rolls. Thanks to its wide working capacity and computer-controlled operation, the machine can be used in flexible workshop production as well as organised manufacturing processes. It is suitable for companies producing ventilation ducts, structural elements, machine covers, tanks, steel sleeves and custom-made components. Repeatable CNC settings are particularly valuable when several identical parts must be formed with the same diameter and curvature.

Condition: ready for operation (used), Available immediately ex-works: Hydraulic long bending machine Manufacturer: Thalmann Capacity: 6000 mm bending length Material thickness: 2 mm Roller shear Rear stop Bwedpozrby Hsfx Aikjr Drive: 4 kW Bending angle adjustment Weight: 3 tons Price: EUR 7,500.00 plus VAT, ex-works

Condition: ready for operation (used), Year of construction: 1993, Immediately available ex-works: Hydraulic plate shear, Steiner Type HTS 30 113 Year of manufacture 1993 Bwjdpfx Aozrbymoiker Digitally controlled back gauge, 1000 mm Light barriers Cutting length 3200 mm Material thickness up to 13 mm Reach 300 mm Stroke 300 mm Drive power 15 kW Weight 15 tons Price: Euro 6,000.00 plus VAT, ex-works.

Condition: ready for operation (used), Year of construction: 1992, Available immediately from our location: Hydraulic single-column press, Edelhoff Type HEP 45 Year of manufacture 1992 Machine complies with the latest UVV regulations Pressing force 45 tons Table 1000 x 1000 mm Bwodpszrbtmofx Aiker Stroke 300 mm Drive power 7.5 kW Weight 6 tons 4 guide pins of the upper ram are broken. These need to be unscrewed and replaced. Apart from that, the machine is in perfect working order. Price: EUR 3,000.00 plus VAT, ex works.

Condition: used, Year of construction: 1988, Immediately available from the racing department: Hydraulic four-column press, Hymag Bjdpfxozrbtgs Aikswr Type HS 4 – 160 k Year of manufacture 1988 Rebuilt to meet the latest occupational safety standards in 2020 Pressing force 160 tons Table size 1500 x 850 mm Stroke 500 mm Drive power 11 kW Weight 7 tons

Condition: ready for operation (used), Ross Parker Hannifin MG051210AAAB hydraulic motor, housing diameter: 93 mm, drive shaft diameter: 25.5 mm, mounting hole spacing: 106 mm, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Bwsdoi Ec D Ujpfx Aikjr

Condition: ready for operation (used), Forging hammers, C type, capacity 80 kg, 400 kg and 750 kg. Ram weight: 80, 400 and 750 kg. Blow energy: 150, 1000 and 2000 KJ. Stroke: 385, 670 and 835 mm. Strokes/min: 210, 130 and 105. Weights: 3,500 kg / 13,500 kg / 25,000 kg. Bwsdpfx Aiox Ahbfjkjr

Condition: like new (used), The Hammer is simmilar with Huta Zygmunt MPM 3150B. -maximum energy of impact at maximum stroke - 3600kgm; -ram weight - 1250kg; -mode of operation – pneumatic; -table size (front to back) - 700mm; -stroke - 800mm; -number of blows per minute – 110; -working pressure - 5 - 7bar; -max. weight of upper die - 400kg; -die height - 220mm; -ram (front to back) - 500mm; -air consumption - 15m3 / min; -anvil weight - 24 t; -height of machine above floor - 3750mm; -total machine's height - 4380mm; Bedpfx Aiofbnhwskowr -total weight - 35t;

Condition: new, Year of construction: 2025, functionality: fully functional, Equipment: CE marking, documentation/manual, • Suitable for pressing veneer, fire-resistant panels, decorative paper, etc. • Suitable for laminating furniture panels, partition walls, wooden doors, or for laminating all kinds of decorative materials onto composite boards. • The press can also be used for drying or smoothing veneer. Pressing force 100 tons Dimensions of heating plate 3000 × 1300 × 42 mm Number of working layers 1 layer Number of heating plates 2 pcs. Distance between heating plates 200 mm Surface roughness of heating plate Ra ≤ 1.6a (2.5 μm) Cylinder diameter Ø 85 mm, material: steel Number of cylinders 8 pcs. Power of hydraulic press motor 5.5 kW Heating method Heating oil Heating power 24 kW Power of circulation pump 1.5 kW Pressure per cm² 3.07 kg/cm² Bwodpfx Aiezhv Svskjr Maximum heating temperature 130°C Press dimensions 4200 × 1670 × 1900 mm Press weight 5300 kg

Condition: like new (used), functionality: fully functional, Year of construction: 2022, Sheet metal shearing machine LVD CS 06/31 Manufacturer: LVD Type: CS 31/6 Year of manufacture: 9/2022 Condition: used, like new Bjdozmimqspfx Aikswr Further information available upon request.

Condition: used, Year of construction: 2021, 2021 | Demarec DCC-30-C | Used Hydraulic Shear 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 42000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 0 inspection points 0 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: A nice concrete crushing shear for 20-35 ton excavators. Jaw opening is 1,150mm. It has an Oilquick OQ80 quickcoupler. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41126 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available Bedpszlrqvsfx Aikjwr ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: excellent (used), Fine impact mill, hammer mill, pin mill, pulverizer, side mill, granulator, shredder, powder mill, granulate mill, granulator, rotor mill, recycling technology, agglomerator -Condition: unused, without controls -Manufacturer: WIPA, Hammer mill -Type: WPZ 750-45 -Drive motor: 45 kW -Number of mallets: 4 pieces -Number of counter blades: 6 pieces -Inlet: Ø 400 mm -Ejection: Height adjustable -Quantity: 3 pieces available Bwodpszbk Tiofx Aikor -Price: per piece -Dimensions: 1160/2335/H1550 mm -Weight: 2100 kg

Condition: new, functionality: fully functional, overall weight: 2,741 kg, empty load weight: 2,741 kg, operation weight: 2,741 kg, Year of construction: 2026, HYDRAULIC HAMMER SHB155 The STEELITE medium-class hydraulic hammers stand out with their high impact energy, robust construction, and reliable performance in daily site operations. Ideally suited for demolition, civil engineering, road construction, and recycling work, they offer an optimal combination of striking power, efficiency, and durability. The sound- and vibration-dampened design ensures high operator comfort with minimal stress on the carrier machine. Benefit from excellent spare parts availability and a 1-year warranty for maximum safety and cost-effectiveness. YOUR ADVANTAGES AT A GLANCE - 1-year warranty - Outstanding value for money - High impact force in a compact design - Excellent spare parts supply - Multiple mounting options - Ready for immediate use SCOPE OF DELIVERY - SHB155 hydraulic hammer - 1 x moil (pointed chisel) - 1/2" hydraulic hoses with metal abrasion guard - Accessory box - Operating manual (German) - CE Declaration of Conformity TECHNICAL DATA Bedpfx Aijy St N Nokjwr - Weight: 2,741 kg - Oil flow rate: 150–210 l/min - Max operating pressure: 250 bar - Tool diameter: 155 mm - Automatic lubrication system - Device cushioning - Suitable for carriers: 27–36 t Advantages of STEELITE Hydraulic Hammers - High breaking performance with smooth operation - Efficient power transmission for cost-effective work - Long service life and low maintenance costs - Robust construction for maximum operational safety - Optimal balance of power, weight, and durability

Condition: new, functionality: fully functional, overall weight: 1,855 kg, empty load weight: 1,855 kg, operation weight: 1,855 kg, Year of construction: 2026, HYDRAULIC HAMMER SHB140 The STEELITE medium-class hydraulic hammers impress with high impact energy, robust construction, and reliable performance for daily jobsite use. Ideally suited for demolition, civil engineering, road construction, and recycling applications, they offer an optimal combination of impact force, efficiency, and longevity. The sound- and vibration-dampened design ensures high operator comfort and minimizes wear on the carrier machine. Benefit from excellent spare parts availability and a 1-year warranty for maximum safety and cost efficiency. YOUR ADVANTAGES AT A GLANCE - 1-year warranty - Excellent price-performance ratio - High impact force with compact dimensions - Excellent spare parts availability - Multiple mounting options available - Ready for immediate use SCOPE OF DELIVERY - SHB140 hydraulic hammer - 1x pointed chisel - 1/2" hydraulic hoses with metal hose protection - Accessory box - Operating manual (German) - CE Declaration of Conformity Bwedpfx Aijy St N Askor TECHNICAL DATA - Weight: 1,855 kg - Oil flow rate: 120–180 l/min - Max. operating pressure: 210 bar - Chisel diameter: 140 mm - Automatic lubrication system - Machine dampening - Suitable for carrier machines: 20 – 26 t Advantages of STEELITE Hydraulic Hammers - High demolition performance with smooth operation - Efficient power transmission for cost-effective work - Extended service life and low maintenance costs - Robust design for maximum operational safety - Optimal ratio of performance, weight, and durability

Condition: new, functionality: fully functional, overall weight: 1,366 kg, empty load weight: 1,366 kg, operation weight: 1,366 kg, Year of construction: 2026, HYDRAULIC HAMMER SHB125 The STEELITE hydraulic hammers in the medium size class impress with their high impact force, robust construction, and reliable performance in daily jobsite use. Ideal for demolition, civil engineering, road construction, and recycling projects, they offer an optimal combination of impact energy, efficiency, and durability. The sound- and vibration-dampened design ensures high operator comfort and minimizes stress on the carrier machine. Benefit from excellent spare parts availability and a 1-year warranty for maximum security and cost-effectiveness. YOUR BENEFITS AT A GLANCE - 1-year warranty - Outstanding value for money - High impact force in a compact design - Excellent spare parts availability - Various mounting options available - Ready for immediate use SCOPE OF DELIVERY - SHB125 hydraulic hammer - 1x moil point chisel - Hydraulic hoses 1/2" with steel hose protection - Accessory box - Operating manual (German) - CE declaration of conformity TECHNICAL DATA - Weight: 1366 kg - Oil flow rate: 90–120 l/min - Max. operating pressure: 210 bar - Chisel diameter: 125 mm - Automatic lubrication system - Machine damping - Suitable for carrier machines: 14–18 t Bwsdpoy St Nijfx Aiker Advantages of STEELITE hydraulic hammers - High demolition performance with smooth operation - Efficient power transmission for cost-effective work - Long service life and low maintenance costs - Robust construction for maximum operational safety - Optimal balance of performance, weight, and durability

Condition: new, functionality: fully functional, overall weight: 835 kg, empty load weight: 835 kg, operation weight: 835 kg, Year of construction: 2026, HYDRAULIC HAMMER SHB100 The STEELITE hydraulic hammers in the medium size class impress with their high impact energy, robust construction, and reliable performance for daily construction site operations. Ideally suited for demolition, civil engineering, road construction, and recycling work, they provide the optimum combination of impact energy, efficiency, and durability. The noise- and vibration-damped design ensures excellent operator comfort and minimizes stress on the carrier machine. Benefit from excellent spare parts availability and a 1-year warranty for maximum safety and cost-effectiveness. YOUR ADVANTAGES AT A GLANCE - 1-year warranty - Excellent price-performance ratio - High impact energy with a compact design - Outstanding spare parts availability - Various mounting options available Bwodpjy St Huofx Aikor - Ready for immediate use SCOPE OF DELIVERY - SHB100 hydraulic hammer - 1x pointed chisel - 1/2" hydraulic hoses with metal hose protection - Accessory box - Operating manual (German) - CE declaration of conformity TECHNICAL DATA - Weight: 835 kg - Oil flow rate: 80–110 l/min - Max. operating pressure: 210 bar - Chisel diameter: 100 mm - Automatic lubrication system - Machine damping - Suitable for carriers: 10 – 14 t Advantages of STEELITE hydraulic hammers - High breaking capacity with smooth running characteristics - Efficient power transmission for economical operation - Long service life and low maintenance costs - Robust design for maximum operational reliability - Optimal ratio of performance, weight, and durability

Condition: excellent (used), German-made hydraulic bookbinding press, 14 stations - rotary Bjdpfx Aiswm Hhzjkjwr

Year of construction: 2017, condition: as good as new (ex-display), machine/vehicle number: 6151550180, Demonstration tool: hydraulic high torque wrench LP2 from TITAN without link Torque range: 363 to 2476 Nm Downforce: suitable for screwdrivers (wrench size SW 19 to SW 60) Links are optional and not included Weight: depending on the cassette from 2.56 to 3.16 kg Total length with cassette: 226.1 mm Total height: 31.8 mm Advantages: -Patent Multi Axen connection: Freely movable hose, multi-positioning of the hose -Flat design: Fits easily on all tight spots - Unique broad-gauge teeth -Modular concept Bwedpfxjdv Scfj Aikjr Characteristics: -Certified accuracy +/- 3% -The Titan WIDE Track ratchet-tooth design distributes the force evenly, it provides a larger contact surface and thus brings the power to solve the-bolt case perfectly - every time - Handcrafted from the highest quality aviation materials for ultimate strength and durability (AQ Grade 7075-T6 Alloy) - Low profile and flat design for extremely tight spaces

Condition: excellent (used), mileage: 5,86,067 km, power: 390 kW (530.25 HP), first registration: 03/2020, fuel type: diesel, tire size: 385/55 R22.5, axle configuration: 6x2, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: other, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 7,500 kg, permissible axle load (axle 3): 12,000 kg, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fog lights, fridge, navigation system, parking heater,

Condition: used, Year of construction: 2022, machine/vehicle number: 042-005844/1, overall weight: 8,000 kg, This ZEULENRODA PRESSTECHNIK PYE 100 F hydraulic single-column press is being auctioned off in our industrial auction / machine auction due to the closure of the J&S GmbH Automotive Technology - Presses and Metalworking site. You can find this and many other items on our platform. Further machine data: ZEULENRODA PRESSTECHNIK PYE 100 F hydraulic single-column press, serial number 042-005844/1, year of manufacture 2022, last service 10/2025, machine in operation until 12/2025 Technical data of the press according to the nameplate: Nominal pressing force: 1000 kN Hydraulic pressure 260 bar Temperature range +15 to +35°C Nominal voltage 400 V Frequency 50 Hz Safety distance 192 mm Total weight 8,000 kg Functionality and technical data have not been tested Bwsdpfx Aozk Ilaeikjr Without further items/without additional accessories, unless explicitly stated as part of the item WE STRONGLY RECOMMEND ATTENDING THE INSPECTION! Subject to change This lot is being auctioned off with reservation. After the auction closes, the seller will notify within 2 weeks whether the highest bid is accepted or not. We will inform you as soon as possible.