Used Imhof Soft Starter for sale (1,750)

Condition: new, stroke lenght (max.): max. 400table height: Fußboden bis Tischplatte Oberkante 900daylight: 600speed: Vorlauf 120 mm , Druck 13 - 4 mm, Rücklauf 170/mm/formance of pump: 103 Lt./min (REXROTH - Axialkolbenpumpe)motor: 22 kw - 1500d / minmessurements (LxWxH): 2000x3200x4300weight approx.: 10.000oil filling: 700 Capacity: 250 tons (at 245 BAR) Operation : Via key switch Manual / set-up mode using two hands without light sensor Automatic via two-hand operation at full speed with light sensor Main cylinder: Ø 350 mm Auxiliary cylinder: 2 pcs. Ø 80 x 60 mm Motor: 22 kW. – 45 hp. Pump: 103 lt./min REXROTH - axial piston pump Speed: Forward 120mm Pressure 13-4mm return 170mm./sec. Clear width: 1100 mm Table top: 1000x1000 mm/ with T-slots Ram plate: 1000 x 1000 mm./ with T-slots & spring welds Installation height: 600 mm (max. distance between table & ram plate) Stroke length: 400mm max Table height: 900 mm floor to table top edge Hydraulics: Block & Valves ( REXROTH ) (Hydraulic Accessory on Top of Press) Iijdpfx Asgta Rcohneg priming valve Hydraulic & mechanical ram protection Pressure setting via PLC (min. pressure 35 ton) Speed setting via PLC. Pressure hold valve for 600 sec. Air cooler (temperature control adjustable via screen) Automatic lubrication for guides (adjustable via screen) Side of the working area closed with sheet metal wall Guide rails for parallelism Auxiliary engine: 5.5 kW+ 2.2 kW Auxiliary pump: 22cc.+5.5cc Safety rails around the hydraulics and side ladder Oil tank: 800 liters Oil quantity: approx. 700 liters Control: SIEMENS S7 - 1200 main switch box Giftable control panel Soft starter for engine Safety PLC: Sick PLC screen 9'' Siemens Two hand operation (movable) Ruler measuring stick for setting the stroke length 450 mm. - NOVOTECHNOLOGY Light sensor for the front and back of the work area - SICK 900 + 150mm. SECOME & Ethernet connection for remote maintenance - Siemens Working space lighting 2 compartment 8 free inputs and outputs on the PLC Automatic print refill if lost Operating instructions in German hydraulic plans control plans

Condition: new, stroke lenght (max.): max. 400table height: Fußboden bis Tischplatte Oberkante 850daylight: 600speed: Vorlauf 120 mm , Druck 13 - 4 mm, Rücklauf 170/mm/formance of pump: 65 Lt./min (REXROTH - Axialkolbenpumpe)motor: 15 kw - 1500d / minmessurements (LxWxH): 2.100 x 2.400 x 4.300weight approx.: 11.000 Capacity: 1500kN. (150 ton - at 245 BAR) Operating selection: Via key switch Manual / set-up via two-hand operation without light sensor fuse on front side (rear side always active) Isdjmpfwdepfx Ahneig Automatic via two-hand operation at full speed (with active light sensor fuse) Main cylinder: Ø 270mm. Auxiliary cylinder: 2 pcs. Ø 70 x 50mm. Motor: 15kw. - 1500d/min. (IE-3) Pump: 45cc. - 65Lt./min.   REXROTH - axial piston pump Speed: flow 120mm. - Pressure: 13 - 4mm. - Return 170mm./sec. Clearance: 1300mm. Table top: 1200 x 800 x 90mm. - with T - grooves ram plate: 1200 x 800 x 600mm. - with T - grooves & ribbing Installation height: 600mm. (max. distance between table & ram plate) Stroke length: max. 400mm. Table height: 850mm. (Floor to table top upper edge) ----- Hydraulics: (Hydraulic accessories on top of the press) Kontrol Block & Valves (REXROTH Proportional Valves) Prefill valve (NG.125) 8 way guide Hydraulic ram safety device Mechanical ram safety device for TDC position Pressure adjustment via PLC. Speed adjustment via PLC. Pressure stop valve for 600 sec. Air cooler Automatic lubrication for guides Auxiliary motor Auxiliary pump Control system: Main control box (mounted on the side of the press frame) Pivoting control panel SIEMENS S7 - 1200   KTP. 9 SIEMENS screen (language selection DE.- ENG.) Safety PLC. (SICK) Light sensor for front & back of work area (SICK 750 + 150mm.) Soft starter Two hand operation (Movable) SECOMEA Ethernet connection Ruler for setting the stroke length (450mm. - NOVOTECHNIK 16BIT) Workspace lighting (2-fold IP-66)   8 free ON & OFF outputs on the PLC. for external connections ----- Protective railing around the hydraulics Lateral ladder ----- Documentation: Operating manual DEUTSCH(1 fold paper & 1 fold USB.) Hydraulics & control diagrams Parts lists CE. Certificate Standard :EN.16092/1/3 ----- Total dimensions: approx. 2400 x 2100 x 4100mm Total weight: approx. 11.000kg. Painting: frame RAL 7035 light grey, railing & hydraulics RAL 7016 anthracite grey. -----

Condition: new, pressure: 150motor: 15daylight: 500stroke lenght (max.): 400table diamension: 900 x 600tappet area: 900 x 600table height: 850messurements (LxWxH): ca. 1300 + (300 Schaltschrank) x 2000 x 3200weight approx.: 8000oil filling: 400Hydraulic C-Frame PressType: C-Frame, hydraulicCapacity: Pressing force: 150 tons at 240 bar Return force: 30 tons at 150 bar Control ModesMode 1: Setup mode without light sensor Mode 2: Automatic single stroke with light sensor Hydraulic SystemMain cylinder: Ø 270 mm Auxiliary cylinders: 2 pcs Ø 70 x 40 mm Guiding columns: 4 pcs Ø 50 mm Main motor: 15 kW / 22 HP (IE3) Pump: 45 cc, 65 l/min – REXROTH Tank capacity: 500 liters Oil volume: 400 liters Auxiliary motor: 2.2 kW / 3 HP Iiodpfx Ahswzzzfjnog Auxiliary pump: included Oil tank air cooler: included Adjustable Speeds (via PLC)Advance stroke: 120 mm/s Return stroke: 140 mm/s Pressing phase: 13 – 5 mm/s Mechanical DataDaylight (open height): 500 mm (distance between ram and table) Stroke length: 400 mm Table depth: 650 mm Throat depth: 350 mm Table height: 850 mm (floor to top of table) Plate DimensionsTable plate: 900 x 600 x 120 mm (with T-slots – customizable) Ram plate: 900 x 600 x 300 mm (with T-slots & spring welding) Hydraulic AccessoriesHydraulic block & valves by REXROTH Pre-fill valve Hydraulic and mechanical ram locking at TDC Pressure & speed adjustable via PLC Side safety doors (slidable towards rear) Control & ElectronicsMain control cabinet PLC: Siemens S7–1200 Safety PLC: SICK Swiveling control panel with soft starter Mobile two-hand control Light sensors: SICK (700 mm + 130 mm) Stroke measurement: 500 mm linear scale HMI: 9 Siemens display (storage for up to 500 tools) Remote maintenance module: Secomea Dual LED work area lighting 8 free I/O ports on PLC (for external systems like robot or coil feeder) General SpecificationsPower supply: 400 V / 50 Hz Standards: Complies with EN 693 machine directive Control safety: Dual-channel secured Valves: Hydraulic proportional valves Documentation: Operating manual, parts list & maintenance plan (in German) Warranty: 12 months (optional 24 months) Paint color: Main frame RAL 7035 – light grey Dimensions & WeightOverall dimensions (W x D x H): approx. 1300 mm + 300 mm control cabinet x 2000 mm x 3200 mm Weight: approx. 8,000 kg

Condition: new, Solid block band saw for log diameters up to 130 cm. Soft starter included, extendable with additional sections. Automatic feed with stepless speed adjustment. Electric height adjustment conveniently operated from the control panel. 8.4-inch touchscreen LCD for height control. Equipped with telescopic log turner, log lifter, 3 telescopic angle stops with 2 extendable log clamps, powered log lifter for horizontal log feed, and coolant pump. Saw unit is suspended on both sides for greater stability and improved precision. CE certified. Technical Data: Cutting length: 6.6 m Max. log diameter: 1300 mm Max. board width: 1000 mm Max. saw blade stroke: 1080 mm Max. frame passage: 365 mm Motor ratings at 100% duty cycle: Main motor: 22 kW Feed motor: 3 kW Hydraulic unit: 7.5 kW Lift motor: 0.75 kW Saw blade size: 6500 mm x 50-60 mm Weight: 3600 kg Optional Special Equipment: Extension section, each 4 m Iodpfx Ahovrvhvonoig 30 kW motor Pre-cutter unit Double-arm log lifter Telescopic log turner Chain log turner Log clamp Material return conveyor Material chute Sharpening machine Setting device Tarpaulin cover Extras not included in the price (Example image)

Condition: as good as new (ex-display), Demonstration machine Extra strong, robust, durable bandsaw mill for logs with a maximum diameter of up to 1000 mm. Includes soft starter, can be extended with extension sections. Automatic feed with infinitely variable speed. Electric height adjustment controlled from the operator panel. Equipped with telescopic log turner, log lifter, log lifter with drive for horizontal log feed. Hydraulic angle stops. Includes 2 log clamping devices. Hydraulic saw blade tensioning. Electrically adjustable saw blade guide. CE certified. Technical data: Max. log diameter: 1000 mm Max. board width (slab width): 920 mm Max. saw blade stroke: 900 mm Min. cutting height: 30 mm Max. frame opening: 365 mm Iijdpfxsvrvq De Ahnsg Cutting length of base section: 7.5 m Extension section length: 3 m Saw blade drive output at 100% duty cycle: 22 kW Feed motor at 100% duty cycle: 3 kW Lift motor: 0.55 kW Hydraulic unit motor: 5.5 kW Saw blade dimensions: 5960 x 60 x 0.9-1.3 mm Weight of base version: 2800 kg This machine includes the following accessories: CTR-1000H60-Ver3 – 3m extension section (extends the cutting length by 3m). CTR-VOR-1300H – Pre-cutting device (for maximum saw blade service life). CTR-AMP – Ammeter (shows the current consumption). CTR950H-KSD – Chain log turner (for hydraulically turning logs). CTR950H-DS – Double-arm log loader (for hydraulic loading). CTR950H-MR – Material chute (allows the end of the pushed material to slide onto subsequent belt or roller conveyors). CTR1000H40-ZUB – Outfeed conveyor for sawn material (allows for very easy material removal or material can be pushed onto subsequent belt or roller conveyors).

Condition: used, Pellet presses Manufacturer: Bühler Model: RPWPR 900.138 EX Isdpfx Ajw Iy T Sohnsig 4 presses - Bühler 3-4 tons per hour 4 mixers 4 feed screw conveyors 20 m long stainless steel chain conveyor 16 m long output conveyor Soft starters

Condition: used, Year of construction: 2021, operating hours: 5,000 h, functionality: fully functional, A scrap shear from Bronneberg is for sale. Iodpfx Ajzhwnxshnjig - 7 m feed table - 125 kW soft starter The machine can be inspected at any time.

Condition: refurbished (used), Year of construction: 1988, TECHNICAL DATA: Jaw opening 200 x 620 mm Year of manufacture 1988 Throughput capacity - 80 t/h Feed material size 4-70 mm Weight 6081 kg Power requirement 90 - 132 kW Special features: Adjustable grinding plates Condition: Refurbished, wear parts replaced, sandblasted, primed, and painted Optional and upon request: Infeed hopper, discharge hopper, motor, frame, V-belt, belt guard, control cabinet with soft starter or frequency inverter, special paint finishes, hydraulic opening mechanism Iodpfxezc H Rae Ahneig

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, operating pressure: 200 bar, total length: 1,100 mm, high-pressure hose length: 10,000 mm, total height: 850 mm, total width: 670 mm, pressure: 200 bar, empty load weight: 20 kg, fuel: super 95, overall weight: 80 kg, warranty duration: 12 months, power: 8.09 kW (11.00 HP), pressure (max.): 200 bar, water pressure: 200 bar, Equipment: chassis, The BMK series high-pressure cleaners are powered by a Honda gasoline engine and therefore do not require an external power connection. They offer maximum mobility and flexibility for work in areas with limited infrastructure. These devices are particularly characterized by their simple and, as a result, durable design. The machine can optionally be equipped with an electric starter (E-start). Included accessories: - 10 m high-pressure hose DN10, with kink protection on both sides - HP350 Soft CL high-pressure gun with swivel joint at the inlet - CL twin nozzle with nozzle protection, including flat jet high-pressure nozzle Dimensions: 1100 x 670 x 850 mm Weight: 80 kg Iiedpfxszd Uawj Ahnsg Available models: BMK 160-25 | 160 bar | 25 l/min BMK 200-20 | 200 bar | 20 l/min BMK 250-15 | 250 bar | 15 l/min

Condition: excellent (used), rotational speed (max.): 1,480 rpm, For sale: a professional, perfectly matched, high-power drive system. The set includes two key components: a robust German AEG electric motor with a power of 110 kW and a modern Lovato Electric microprocessor-based soft starter (195 A). Please note: the sale includes only the main components shown in the pictures (motor + soft starter). The offer does not include the control cabinet housing, wiring, or auxiliary contactors. Using this set guarantees a safe, fully controlled, and smooth start-up of a powerful machine. The soft starter eliminates mechanical shocks in the gearboxes and drastically reduces the high inrush current, preventing voltage drops and tripping of the main protection devices in the facility. ⚙️ 1. ELECTRIC MOTOR SPECIFICATIONS: Manufacturer: AEG (Germany) Model / Type: AM 315 SX 4 H1 Rated power: 110 kW (150 HP) Rotational speed: 1480 rpm (4-pole) Supply voltage: Δ 380-400 V / 50 Hz Rated current: 212 A Insulation class: Class B Technical standards: VDE 0530/66 Visual condition: The motor has a robust cast-iron housing, is in perfect working order, and has a transport lug. The shaft end with a key is protected by a metal cover. It has grease fittings for regular bearing lubrication (bearing lubrication every 4000 hours). ⚙️ 2. DIGITAL SOFT STARTER SPECIFICATIONS: Manufacturer: LOVATO ELECTRIC S.p.A. (Bergamo, Italy) Model / Type: ADXL 0195 600 Rated operating current: 195 A (Provides an optimal margin for this motor) Main circuit voltage: 3 x 208...600 V AC (~ 50/60 Hz) Iodpfxsy Tzw Re Ahnjig Control voltage (auxiliary): 100...240 V AC Interface and connectivity: Built-in LCD screen, operator keyboard (4 buttons), status LEDs (POWER, RUN, ALARM), and wireless NFC technology and an IR port for easy programming of the start ramp using a smartphone. Protections: Advanced, built-in protection against motor overload, phase imbalance or phase failure, and shaft jamming. 🚀 IDEAL APPLICATION: The set was used in the wood industry, but it will also perform perfectly in any demanding machine with a heavy start-up: Multi-blade saws, edgers, advanced industrial wood chippers. Stone crushers, concrete crushers, impact mills, and screens. Large screw compressors, blowers, and industrial pumps. 🚚 DELIVERY AND CONTACT: The equipment is in good working order, clean, and ready to be installed in a new cabinet. Due to the motor's considerable weight, personal collection is preferred (we can provide loading with a forklift / crane on site). We can also arrange dedicated pallet transport. Price for the complete set (Motor + Soft Starter).

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Working height: 900 mm Working width: 1,350 mm Belt changing side: left Workpiece thickness: 3 - 160 mm Frequency-controlled feed speed: 4 - 20 m/min Abrasive belt dimensions: 2,620 x 1,350–1,380 mm Adjustable sanding belt blowing device with 5 settings WRD WORKPIECE CLEANING ROTOR Workpiece cleaning system with 16 rotating nozzles MOBILE OPERATING TERMINAL powerControl with powerTouch SST SOFT STARTER Inrush currents are limited to prevent voltage drops GWRD BELT CLEANING PROGRAM Upon activation, the machine automatically sets to a 10 mm workpiece thickness and activates the blowing rotors. After the feed belt is fully cleaned, the machine returns to its initial setting. AAT EXTRACTION DAMPER CONTROL Control of extraction dampers via the terminal (24 Volt DC, without extraction dampers included) UPS EMERGENCY POWER SUPPLY FOR BELT CONTROL 1-3 PCS Uninterruptible power supply for sanding belt oscillation in case of power failure System consists of: SANDTEQ W-700, PROFI SWB735/RRE – sanding from below Wide belt sanding machine with three sanding units for processing wood or wood-like workpiece surfaces Prepared to accept up to two auxiliary units, such as a cleaning brush, satinizing or structuring brush, and rotating cleaning nozzles. Units: I. R UNIT Sanding unit with automatically adjusting contact roller Iedpfxjyw Ndms Ahneig Profiled steel roller, 240 mm diameter With grain compensation Drive motor: 37 kW Abrasive belt speed: 25 m/s - Automatic locking of the sanding unit for fast belt changes and increased process safety - Abrasive belt drives with electronic, wear-free brake - Optical, touchless abrasive belt tracking - Pneumatic abrasive belt tensioning with integrated belt edge compensation II. R UNIT Sanding unit with automatically adjusting contact roller Rubber-coated roller, 240 mm diameter Rubber hardness: 85° Shore With grain compensation Drive motor: 30 kW Abrasive belt speed: 18 m/s III. E UNIT Sanding unit for installing a pressure beam - Automatic locking of the sanding unit for fast belt changes and increased process safety - Abrasive belt drives with electronic, wear-free brake - Optical, touchless abrasive belt tracking - Pneumatic abrasive belt tensioning with integrated belt edge compensation - Protected storage area on the machine for additional sanding inserts Drive motor: 22 kW Abrasive belt speed: 2 – 18 m/s Torque-dependent standby operation to reduce energy consumption. ACP PNEUMATICALLY SUPPORTED PRESSURE BEAM - Adjustable sanding pressure via pressure regulator - Workpiece-controlled engagement and disengagement at the leading and trailing edges - Various sanding inserts, 80 mm wide, with different felt hardnesses Machine dimensions (L x W x H): 3,900 x 2,100 x 2,000 mm Machine weight: approx. 7,500 kg SANDTEQ B-700, PROFI SWT735/RRE – sanding from above Wide belt sander with three sanding units for machining wood or wood-based workpiece surfaces Units as above, additionally: FBM FINISHING BRUSH Brush unit with finishing brush Bristles: horsehair Diameter: 130 mm Drive motor: 0.75 kW Machine dimensions (L x W x H): 2,995 x 2,100 x 2,255 – 2,415 mm Machine weight: approx. 6,500 kg

Condition: used, Year of construction: 2019, gearing type: other, first registration: 01/2019, mileage: 1,001 km, driver cabin: other, Vehicle location: Bovenden, Structure: Saxon brake tester B 99 GF-ECO A modern, fully digitalized brake tester, for trucks, buses, tractors, cars and commercial vehicles up to 15 tonnes permissible axle load, large test width and raised roller position for testing all-wheel drive vehicles, particularly small design for installation in existing foundations and for low depth, automatic test sequence with automatic assignment of axles, braking systems and ovalities, standard with automatic extension aid, soft starter for drive motors and remote control, manufactured exclusively in Germany according to DIN ISO 9001, type approval according to Directive 2011 in Germany, next test date 05/2025, always covered, ACCESSORIES INFORMATION WITHOUT GUARANTEE, changes, prior sale and errors reserved! Iiedpfopccblox Ahneg - .

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), Parts Cleaning System / Spray Cleaning System Type CM13 2-Tank (Washing + Rinsing) including air knife blow-off Basket Diameter: 1,300 mm (octagonal) Max. load capacity: 1,000 kg Basket is loaded and unloaded by the operator using a transfer cart (detachable/mobile) positioned in front of the machine. Useful height: 800 mm Wash tank: Volume: 430 liters, Spray pressure: 6.0 bar Rinse tank: Volume: 280 liters, Spray pressure: 4.0 bar Total connected load: approx. 52 kW Control: Siemens S7-1200 with KTP700 touch panel Including the following features: + automatic water refill for both tanks + automatic chemical dosing 1-10% (Dosatron) + special spray system (can be optionally activated) for small components (= E-spray system) Iodpjv Tm Aysfx Ahnsig + side channel blower with height-adjustable air knife system (blow-off drying) + steam extraction including condensate return + weekly timer for electric heating + pre-configured for retrofitting an oil separator + media filtration via bag filter (manufacturer Eaton, Topline) in both circuits (washing and rinsing) + external cladding with stainless steel sheet + complete system fully insulated + tanks separated into two modules; fully insulated (different temperatures possible) + removable filter baskets in the return flow + stainless steel circulation pumps incl. mechanical seal and soft starter The system is exhibited at the Glogar Technology Center and is used exclusively for washing trials.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 100 h, control type: manual, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: ABB, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 8 bar, Equipment: centralized greasing system, cooling unit, documentation/manual, emergency stop, High Pressure Unit 90PW3 for Sale Model: 90PW3 (explosion-proof motor) Manufacturer: Power (Tianjin) Technology Co. Key Technical Specifications - Maximum pressure: 140 MPa (extendable to 276 MPa by changing the hydraulic head) - Rated flow: 30 L/min - Rated power: 90 kW - Transmission ratio: 2.75:1 - Rated speed: 530 RPM Ijdpfx Ahsyxy D Tonoig - Plunger diameter: 18 mm - Dimensions: 2000 × 1200 × 800 mm - Weight: 1200 kg Main Components Included - 90PW3 high-pressure triplex pump - Explosion-proof motor - Flexible pin coupling - Booster centrifugal pump (feed) - Bag filter + Y-strainer - Pneumatic valve (automatic opening at 55 MPa) - Control panel with indicators - ABB soft starter - Water storage tank with level control (IFM sensor), PLC-controllable pneumatic intake valves Technical Advantages - Forced lubrication – prevents overheating due to friction - "Super simple" maintenance: quick removal of packing and valves

Condition: good (used), Bosch Diffusion Welding Machine The system described here was designed for the following use: Diffusion welding machine for connecting the armature lead to the commutator of a starter armature using diffusion welding. Diffusion welding unit (also known as polymer diffusion welding unit, diffusion welding, copper soft welding unit, copper strip welding unit), consisting of a main machine and control system, PLC control, touchscreen operation. Process Description The workpiece carrier enters the station and is lifted. The alignment gripper picks up the armature from the workpiece carrier and aligns it according to the welding position. The loading gripper picks up the armature and places it in the welding chuck. The welding chuck moves with the armature into the welding position. The contacting unit and welding cylinder move together, and the first weld is performed. This process is repeated until the armature is completely welded. The welding chuck moves with the anchor into the transfer position, and the unloading gripper picks up the anchor and places it on the raised workpiece carrier. The workpiece carrier is lowered. Workpiece carriers with OK anchors continue on the conveyor system; NIO anchors are sent to the removal conveyor. At a welding machine, the OK anchors are marked with a color on the end face of the commutators using a stamping station. This allows for identification during the final inspection of which welding machine produced the anchor. ... Technical Data: Diffusion Welding Machine Energy Data: Frequency: 50 Hz Rated Power: approx. 11 kW Operating Voltage: 400 V / 3P Control Voltage: 24 V Rated Current: 20 A Fuse: 35 A Water: Inlet pressure 4 bar, 15-23 °C, approx. 25 l/min Compressed Air, oil-free: min. 5 bar Temperature: 1000 °C at the tungsten electrodes Machine Dimensions without Control Cabinet Depth: 1800 mm Width: 3100 mm Height: 2700 mm Weight: 3000 kg Year of Manufacture: 2016 Financing through our bank is also possible. komplett-konzept.leasingo.de Further items – new and used – can be found in our shop! Iedpfjg Icfpjx Ahnsig International shipping costs on request!

Condition: used, machine/vehicle number: FN535356, Year of construction: 2017, operating hours: 3,483 h, load capacity: 3,500 kg, lifting height: 3,600 mm, fork length: 1,800 mm, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Iisdpfezz Hryjx Ahneg Load capacity: 3,500 kg Lifting height: 3,600 mm Fork length: 1,800 mm Lifting mechanism Mast design: Duplex mast Mast type: Free-lift mast without a central hydraulic cylinder MACHINE DETAILS General Year of manufacture: 2017 Operating hours: 3,483 h Drive type: LPG Dimensions and weight Own weight: 4,896 kg Overall length: 5,700 mm Overall width: 1,300 mm Overall height: 2,420 mm Maintenance and inspection UVV certificate valid until: Next service due in: 516 h Starter battery: new (?) Previous owner: former Jungheinrich full-service unit EQUIPMENT Side shifter 3rd valve Full cabin Heater Windshield wiper LED work light (front) LED work light (rear) Comfort seat LPG cylinder exchange system

Condition: used, machine/vehicle number: E11401004015, Year of construction: 2019, operating hours: 3,410 h, load capacity: 10,000 kg, lifting height: 3,500 mm, fuel type: diesel, fork length: 1,200 mm, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 10,000 kg Lifting height: 3,500 mm Fork length: 1,200 mm Fork cross-section: 145 x 90 mm Fork radius: 105 mm Fork adjustment range: 0 to 1,980 mm MACHINE DETAILS Ijdpfx Ahjzz Hltsnjig Drive type: Diesel Number of wheels: 6 Dimensions & Weight Dimensions: 5,600 x 2,550 x 3,155 mm Weight: 17,510 kg Overhead guard height: 3,000 mm UVV certificate valid until: 08/2027 Starter batteries replaced: 01/2025 Operating hours: 3,410 h EQUIPMENT 3rd and 4th hydraulic valve Hydraulic fork positioner Side shifter Full cabin Air conditioning Heater Windshield wiper Multi-function display with touch function LED work lights (front) LED work lights (rear) Road traffic lighting with turn signals Additional work lights Rotating beacon Safety light (rear) Motec camera with a view of the fork tip (currently not functioning) Air-suspended comfort seat Comfort seat can be swivelled 17° to the right If the mast is too high, it can be disassembled for transport upon request and loaded accordingly. All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Lateral loading up to 6 t is possible using a large forklift truck available on-site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 t, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior arrangement is possible from Monday to Friday between 07:00 and 16:00. A storage fee of €20 per machine per day will be charged for late collection. Any outstanding storage fees must be paid in full before collection. Lot number: 1

Condition: new, power: 68 kW (92.45 HP), fuel type: diesel, fuel tank capacity: 128 l, tire size: 12.5x18-12, axle configuration: 4x4, Year of construction: 2025, Equipment: air conditioning, all wheel drive, = Additional options and accessories = - Adjustable seats - Bucket - Intercoolor - Seat ventilation - Stabilizers - Tool box = Remarks = Country of origin: INDIA Displacement: 4,400cc Torque: 408Nm (41.6 kgm) @ 1200rpm Dimension: 5,960 x 2,350 x 3,610 Brakes: Service: Hydraulically actuated dual line,Parking: Hand operated, disc brake on rear axle,2WD / 4WD: Electrical selection Bucket size: 1.1 Cubic meter Attachments piping: Available Gearbox type: JCB, Synchroshuttle ,4 forward/4 reverse Mainframe: 2ws Sideshift Gear Pump: 123lpm Cab: Shower A/C Pack Hvac Rops ,Fully adjustable seat and soft touch steering wheel ‘Walk through’ two door access Seat belt large convex rear view mirror interior light front screen wiper horn hazard warning system Instrumentation panel includes engine speed engine hours speedometer fuel level water temperature gauge and 12v connection Audible and visual fault warning system for alternator charge coolant temperature engine oil pressure blocked air filter transmission oil pressure and temperature and hand brake on Excavator End: 14' Std Lift Fixed Dipper Loader: Std 3 Spool Float Only Loader Aux Pipework Excavator Controls: Manual (Jcb) Hammer Pipework Gp 1.1m³ Shovel Excavator Bucket: Std 600mm (24") Profile Sae Capacity: 180 Liters Steering: Front wheel full power hydrostatic system utilising the main hydraulic pump via a steering priority valve In the event of engine failure emergency steering is maintained Electrical and Instrument: 12 volt negative ground utilising wiring and connectors meeting IP69 water ingress test standard. Central fuse panel LiveLink standard Bluetooth radio standard Guide me home lights switches on the external lights for 30 seconds to assist operator to walk safely after parking machine Battery: 130 A/hr 900 CCA. Alternator: 90 amp standard. Front working lights: 2 fixed Rear working lights: 2 fixed and 2 adjustable Hydraulic System: JCB vari-matic hydraulics Main relief valve: 228bar Unloader valve: 207bar Filtration through suction strainer and return line JCB Filtermatic filter During excavation the circuit automatically varies hydraulic power to match digging conditions for extra performance control and power Careful routing of hydraulic hoses and pipework guards against site damage and allows easy servicing JCB diagonal (X) pattern controls = More information = Isdpfxoy Tylts Ahnjig Technical information Number of cylinders: 4 Engine capacity: 4.400 cc Axle 1: Tyre size: 12.5x18-12 Axle 2: Tyre size: 16.9x28-12 Engine type: JCB 444 Measures and weights GVW: 7.800 kg Dimensions (LxBxH): 596 x 235 x 361 cm Wheelbase: 224 cm Other information Excavator bucket: 1.1 m^3 Gearbox type: synchronized

Condition: new, power: 316 kW (429.64 HP), fuel type: diesel, tire size: 20497- Tyres 12.00R20, axle configuration: 6x4, wheelbase: 4,200 mm, fuel: diesel, fuel tank capacity: 550 l, color: white, emission class: euro3, suspension: steel, Year of construction: 2025, Equipment: ABS, EBS, cruise control, electric window regulation, fog lights, = Additional options and accessories = - Sun visor = Remarks = Cabin type: All Time (sleeper cabin) Country of origin: Spain Displacement: 9,000cc Dimension: 9,100 x 2,550 x 3,100 Ground clearance: Front - 337 Rear - 311 Brakes: Drum Brakes (Front/Rear) Steering: LH Drive Construction: Chassis Gearbox type: TX-16M Type: AT380T43H Colour: 50105- White IC 194 Shipping Dimension: 8.3x2.55x3.10 m Chassis Length: 5.8 meters approx Provision Radio Dab Orlandi Tow Hook Towing Version Eco-roll Loads 7500-13000-13000kg Drive tire 12.00R20 FMS Data interface Batteries 220Ah Rear dampers Reverse Buzzer Cross member D=200 KN 7+7 Pin trailer plug Automatic 45mm D=200 KN Front multileaf susp Wheel chocks (2) Headlight protection Rear Overhang 1990mm Pneum. Horn-Chassis Curtains on door windows Standard gear mode 08329 Isdpfx Ajy Tyhzshnsig Steel front bumper Front anti-roll bar Rear multileaf susp Tyre inflation hose Vin code check digit Warning triangle Del. Heated screen Radice VIN WJM STD setting C11/C13 Safety Hor. Filter Cartridge Horizontal Air Filter 630cc Air Compressor Steel Air Tank Alternator 90A/24V APU Free discharge Horiz batt side fram Standard gray plastic part Mechanical cab suspension Manual cab tilting At low roof cab Del. package tray Temperature countries preparation With door sticker (IT03-EN) Fabric air susp driver seat Ecoswitch Limitation on SL Lower exhaust pipe Engine Speed 1900rpm Del. Front underrun protection S disp oper ped post Grey IC444 chassis Standard cab trim Speed limiter 90km/h Soft touch foam steering wheel MPH/KPH Speedometer Pre-heater Trattam. = More information = Tyre size: 20497- Tyres 12.00R20 Suspension: leaf suspension Empty weight: 9.000 kg Carrying capacity: 24.500 kg GVW: 33.500 kg

Condition: new, functionality: fully functional, power: 30 kW (40.79 HP), Year of construction: 2025, A double roller crusher for sand making, also known as a roller sand making machine, is a processing machine that utilizes two rollers to crush and reshape coarse-grained materials such as rock, stone, and ore into finer particles. This type of equipment is commonly used in the production of construction aggregates, artificial sand, and other materials used in various industries. Here are key features and aspects of a double roller crusher for sand making: 1. Double Roller Design: - The crusher has two parallel, counter-rotating rollers that exert pressure on the material. The gap between the rollers can be adjusted to control the size of the crushed particles. 2. Crushing Mechanism: - The material is fed between the two rollers, and as they rotate, the material is drawn into the crushing zone. The rollers compress and crush the material, reducing it to the desired size. Ijdjq Ngamspfx Ahneig 3. Material Feed and Discharge: - The material is typically fed into the top of the crusher and is crushed between the rollers. The crushed material exits at the bottom of the machine. 4. Adjustable Gap Settings: - The gap between the rollers is adjustable, allowing for control over the final size of the crushed material. This feature is essential for producing materials of different particle sizes. 5. Roller Surface Design: - The surface of the rollers may be smooth or have corrugations to enhance the gripping and crushing action. The choice of roller surface design depends on the characteristics of the material being processed. 6. High Efficiency: - Double roller crushers are known for their high efficiency in crushing and shaping materials. The dual roller design provides a more consistent and controlled process compared to single roller crushers. 7. Versatility: - These crushers are versatile and can be used for various materials, including hard and soft rocks, ores, and other aggregates. They are particularly suitable for producing artificial sand. 8. Dust and Noise Control: - Some double roller crushers are equipped with features to control dust emissions and reduce noise during operation, improving the working environment. 9. Application in Sand Making: - Double roller crushers for sand making are commonly used to produce fine aggregates and artificial sand. They are employed in the production of high-quality sand for construction and other applications. 10. Maintenance and Safety: - Regular maintenance is essential for optimal performance. Safety features, such as emergency stops and safety guards, are often incorporated to ensure safe operation. 11. Motor and Drive System: - A powerful motor and a reliable drive system are essential components to drive the rotation of the rollers and ensure consistent and efficient crushing. The specific design and features of double roller crushers for sand making can vary among different models and manufacturers. When selecting or using this type of equipment, it's important to refer to the manufacturer's guidelines and specifications for proper operation and maintenance.

Condition: new, Year of construction: 2026, HSI Crusher and Impact Crusher: Efficient Solutions for Limestone and Talc Crushing Introduction An HSI crusher (Horizontal Shaft Impact crusher) is a highly efficient crushing machine widely used in mining, quarrying, and aggregate production. As a key component in a limestone crushing plant, it delivers precise shaping and high reduction ratios. Whether used as a limestone crusher or talc crusher, the HSI impact crusher ensures consistent particle size and superior performance across various materials. Features of HSI Impact Crusher High Crushing Efficiency The impact mechanism uses high-speed rotors and blow bars to achieve fine and uniform crushing results. Versatile Applications Suitable for medium-hard to soft materials such as limestone, talc, gypsum, and coal. Adjustable Output Size Hydraulic or mechanical adjustment systems allow easy control of product size. Durable Components Wear-resistant blow bars and liners extend service life and reduce maintenance costs. Easy Maintenance Quick access doors and modular design simplify inspection and part replacement. Iedpfx Aoq Ny Saehnoig Energy Efficiency Optimized rotor design and balanced operation minimize energy consumption. Technical Specifications (Typical Range) Model:1214 Max input size： 300 mm, Capacity: 100-140 t/h Model:1315 Max input size: 350mm Capacity: 150-200 t/h Specifications may vary depending on material hardness and feed size. Applications Limestone Crushing Plant: Primary or secondary crushing of limestone for cement, aggregates, and construction materials. Talc Crusher: Fine crushing of soft minerals like talc and gypsum for powder production. Aggregate Production: Produces cubical-shaped aggregates ideal for asphalt and concrete. Recycling: Effective for crushing concrete, asphalt, and demolition waste. Why Choose a Reliable Impact Crusher Manufacturer Selecting a trusted impact crusher manufacturer ensures high-quality materials, advanced design, and reliable after-sales service. A professional supplier provides customized solutions for specific materials, such as limestone crusher or talc crusher, ensuring optimal performance and long-term durability. Impact Crusher for Sale Modern impact crushers for sale feature advanced automation, energy-saving systems, and improved wear resistance. They are ideal for operators seeking high productivity, low operating costs, and consistent output quality in both stationary and mobile crushing setups. Conclusion An HSI impact crusher is a versatile and efficient solution for crushing limestone, talc, and other medium-soft materials. With robust design, adjustable settings, and high throughput, it plays a vital role in any limestone crushing plant or mineral processing line. Choosing the right impact crusher manufacturer ensures reliable performance, reduced downtime, and long-term value.

Condition: new, functionality: fully functional, power: 75 kW (101.97 HP), Year of construction: 2025, Impact Crusher: Structure, Operation, and Technical Specifications An impact crusher is a high-efficiency crushing machine widely used in mining, cement, construction, and recycling industries. It is designed to crush materials by utilizing the energy of impact rather than pressure, making it ideal for medium-hard and soft materials such as limestone, gypsum, coal, and concrete aggregates. Its ability to produce uniform, cubic-shaped particles makes it a preferred choice for aggregate production and fine crushing applications. Working Principle The impact crusher operates on a simple yet powerful principle: material is fed into the crushing chamber and struck by high-speed rotating blow bars mounted on a rotor. The kinetic energy from the rotor transfers to the material, causing it to break upon collision with the impact plates (also known as breaker plates). The crushed material rebounds within the chamber for secondary impacts until it reaches the desired size and exits through the discharge opening. The process involves: Primary Impact: Material is hit by blow bars and thrown against the impact plates. Secondary Impact: Rebounded fragments collide again with the rotor or other particles, achieving finer crushing and better shape. Structural Composition An impact crusher consists of several key components that ensure efficient operation and durability: Rotor Assembly: The core component, equipped with blow bars that deliver high-speed impact energy. Impact Plates (Aprons): Adjustable plates that control the crushing gap and final product size. Feed Inlet and Discharge Outlet: Designed for smooth material flow and uniform discharge. Frame and Housing: Heavy-duty welded structure providing stability and vibration resistance. Adjusting Device: Hydraulic or mechanical system for controlling the gap between rotor and impact plates. Safety Mechanism: Hydraulic opening system for easy maintenance and overload protection. Technical Highlights Feed size: ≤500 mm Discharge size: 0–60 mm (adjustable) Capacity: 30–800 t/h Motor power: 45–560 kW Rotor speed: 500–1500 rpm Performance Features: High Crushing Efficiency: The high-speed rotor and optimized chamber design ensure strong impact force and high reduction ratio. Excellent Particle Shape: Produces cubic, uniform aggregates suitable for concrete and asphalt production. Adjustable Output Size: Hydraulic or mechanical adjustment allows precise control of product size. Easy Maintenance: Replaceable blow bars and liners with quick access doors simplify servicing. Iijdpov E Ddljfx Ahnjg Versatile Applications: Suitable for primary, secondary, and tertiary crushing in various industries. Types of Impact Crushers Horizontal Shaft Impact (HSI) Crusher: Uses a horizontal rotor to deliver impact energy. Ideal for soft to medium-hard materials and widely used in aggregate and recycling applications. Conclusion The impact crusher combines high-speed impact energy with a robust structural design to deliver efficient, reliable, and versatile crushing performance. Its ability to produce well-shaped aggregates, adjustable output sizes, and low maintenance requirements make it indispensable in modern crushing systems. Whether in mining, construction, or recycling, the impact crusher remains a key machine for achieving high productivity and superior material quality.

Condition: new, functionality: fully functional, fuel type: gas, power: 1,521 kW (2,067.98 HP), output voltage: 400 V, output frequency: 50 Hz, rotational speed (max.): 1,500 rpm, motor manufacturer: MTU, 9 pcs in stock =Scope of supply= Genset mtu 12V4000L64FNER, 400 V for operation with Natural Gas. gas train of 116-250 mbar inlet pressure with 1m flexible rubber-metal connecting hose. set of sylomer stripes for genset foundation installation. set of flexible connection for engine coolant circuit with flange connection Iisdey Hcvbspfx Ahnjg set of flexible connection for mixture coolant circuit with flange connection set of exhaust bellows with flange connection and companion flange set Maintenance-free starter batteries, mounted on base frame. MIP (MTU Interface Panel) incl. Black Start option and ECU Remote Control interface =Technical specifications= Time for delivery - in stock Engine type - mtu 12V4000L64FNER Electrical power - 1521 kW Engine speed - 1500 rpm Electrical efficiency - 43.9 % Total efficiency - 88.6 % Alternator type - Leroy Somer LSA 53.2 VL6 Voltage - 400 V Frequency - 50 HZ < 500mg NOx at 5% O2 =Other information= Production country - Germany

Condition: new, functionality: fully functional, fuel type: electric, Year of construction: 2026, The bunker of the PRO-150 Mobile crushers has been developed by our engineers as user-oriented to operate with high-level efficiency. The vibration speed of the vibrating feeding bunker is easily guided by the automation system which can be adjusted manually. This feature prevents the bunker from wearing out and provides the user with longer and more efficient usage. In order to avoid any performance loss due to the damp or muddy material processed in the crusher plants, the wobbler feeder contains all the necessary qualities. While the wobbler feeder has potential to process without any problems for many years. Aslo stands out with easy maintenance feature as well. The poor quality of material separated in the wobbler feeder is thrown into the bypass belt and therefore user get a high-quality final product. Additionally; if desires, the materials falling into the bypass can be sent directly to the screen thanks to the reversible conveyor in the bypass system under the wobbler feeder. Iodpfjz Di Akox Ahnoig FABO primary impact crushers are designed to crush soft and medium hard stones with high rotor speed. It is considered as the heart of the mobile system. With the help of high-speed rotating rotor crushing hammers, the products poured from the feeder are crushed with the help of pallets. Hydraulically adjustable rods allow the products to be obtained in the desired size. FABO folding type hydraulic belts send the right product to the crusher and the stock area according to customer requests after sorting through the vibrating screen. With foldable structure, the plant minimizes dimensions of the machine for the transportation. The number of stock belts can change due to customer requests. 10 mm EP 125 4-ply belt elastics moving on twisted sheets perfectly transport the aggregate coming out of the screen to the area desired by the user. Belt elasticity, which produced resistant to wear, offers many years of life without letting customer down. The flap system is a special system that allows the directly crushed material to be taken from the crusher with the help of the pre-stock belt without being screened in the mesh. The plant minimizes production time with its unique location just in front of the screen.

Condition: new, Year of construction: 2026, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO PRO Serie is a mobile type closed circuit crushing plant that is suitable for especially limestone and other types of stones with hardness level is soft or medium. MAIN FEATURES: * Closed circuit crushing till to get desired size of product * Capacity is variable according the material feed and final product dimensions to be crushed. * All equipments are assembled on single special heavy duty construction chassis, transportable by 1 truck. * Conveyors are foldable * Up to 3 different sizes of aggregates * Since the whole plant is built in one chassis, it has the advantage of the fastest production line * PRO Serie Mobile Crusher Plant can be used by single operator, feed can be done by truck, loader or excavator * Plant can be installed in 2 days with its special heavy duty construction chassis * With its multifunctional primary impact crusher, plant can crush different product sizes with high capacity * It is equipped with 3 axle, air-controlled brake system and signaling system. * Hydraulic system is controlled by remote system * All motors are under protection with metal sheet covers * The dust suppression control system prevents dusting by conveying high pressure water. * Mobile system has complete fully automation system. Also the plant can be controlled by using tablet with single staff. PRO 90 CRUSHING AND SCREENING PLANT -Bunker: 20 m3 -Plant Dimensions: 16870x4552x4627 mm -Production Capacity: 90-130 Tons Per Hour -Crusher Type & Rotor Size: Turbo Impact – 1100x900 mm -Maximum Feeding Size: 500 mm -Vibrating Screen Size and Deck: 1400x4000 mm 3-4 decks -Total Motor Power: 196 Kw -Generator Capacity: 400 kvA → PRO 90 IS A COMBINATION OF : • Bunker • Vibrating Feeder • Turbo Impact Crusher • High Stroke Type Vibrating Screen • Folding type feeding, feedback, bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Dust Suppression System Iodpfoz A Dl Rex Ahneig • Easy walking platforms for maintenance • Diesel Generator (Optional) FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!