Used Kehren Rotary Table Surface Grinding Machine for sale (68,502)

Condition: new, neu ca. 2 Wochen ab Auftragse Italien 17940 € 344.45 € 350 mm 300 mm 500x160 mm 350x150 mm 300x150x55 mm 2800 1/min 3,6 kW 1020 mm 820 mm 2170 mm 440 kg Ijdpfoywcl Rjx Anvoau Dm. 200x78x78 mm This Grinding machine with fixed table derives from the model R.V. 500 but it differs from it as it is equippedwith a long column supported by four bearings and is opportunely stiffened by a sturdy column support. This Surface grinding machine, due to its stiffness and geometrical stability, is highly suitable for grinding with precision pieces of notable height: single or mass-produced die-shop components, moulds, punches, gears and others. Moreover, the nuts of the vertical translation screw and the dowels to realign the wheel motor to the axis,equipping this model of Grinding machine with fixed table, allow preserving perfect work conditions over the years, too. CAST IRON BED to maintain the geometric stability of the grinding machine in time, too. CAST IRON COLUMN, protected by bellows and supported by four adjustable precision bearings, broadly sized for this type of grinding machine with fixed table. Three-phase MOTOR air-cooled by double jacket, to prevent the overheating of the grinding machine motorduring continuous machining and to keep the temperature of the motor shaft and of bearings constant. Hardened, ground and dynamically balanced SHAFT, supported by precision ball bearings, widely sized for this type of grinding machine with fixed table and self-adjusting by means of springs for the backlash preload, to absorb thermal expansions. VERTICAL TRANSLATION SCREW supported by opposite and adjustable ball bearings, with apt motion for maintaining, in this model of grinding machine with fixed table, the wheel work field free from hindrances and for avoiding dust depositions. Metal BELLOWS for a better protection of the vertical translation screw of the grinding machine. Opposite bronze NUTS, for the recovery of the eventual wear in time of the vertical translation screw of the grinding machine with fixed table. REGISTRATION DOWELS to re-align the wheel motor of the grinding machine to the axis, obtaining parallel surfaces also in time. HANDWHEEL of the grinding machine, supported by three bearings and engaged on the screw by means of a pair of helical gears, equipped with graduated drum, supported by a trust bearing, for a stock removal of mm 0.01 - 0.02 - 0.03 for each single pass; the rapid feed per handwheel turn is mm 2. KNOB WITH JACK, for the programmable micrometric feed of mm 0.01 - 0.02 - 0.03 - 0.04 per pulse, which allows a simple use by avoiding the constant increment control. SLOT to permit the maximum use in height of the work field of the grinding machine wheel and to clamp non-magnetic parts and accessories such as: magnetic chuck, self-centering chuck and squares. Low-voltage CONTROLS, protection, indicator light and all requisites to comply with safety and conformity regulations provided for this type of grinding machine with fixed table. HANDLES, SHAPES AND SIZES of the grinding machine with fixed table designed to meet the current ergonomic recommendations for work. WITH FOLLOWING ACCESSORIES: Magnetic chuck 300 x 150 mm Wheel flange and cup wheel Semiautomatic dresser with diamond Coolant system Operating manual in German or Italian

Condition: reconditioned (used), Generally overhauled grinder manufactured by LŽT Kikinda, type URB 550/750/1000. Machine Features: table area 880/1130/1500 x 300 mm Max. Grinding length 550/750/1000 mm Max. grinding width 350 mm Max. Grinding wheel axis height 500 mm Max. Cross stroke of the table 300 mm Max. Longitudinal stroke of the table at max. speed 570/770/1020 mm normal size of magnetic plate 500/750/1000 x 300 mm Sanding disc 300x50x127 mm Grinding accuracy 5 microns new electrical cabinet with components manufactured by ABB, Schnieder Painting in the final color according to the customer's wishes Warranty on work: 6 or 12 months. Delivery time: by agreement. Iaodpfev Tah Nox Anvou Feel free to call for anything else.

Condition: reconditioned (used), Generally overhauled grinder for external and internal round grinding LŽT Kikinda, type AFB 300/500 and UFB 300/500 Machine Feature: spike height 135 mm Spacing between spikes 300/500 mm Diameter of the through workpiece 270 mm Grinding length 300/500 mm maximum workpiece weight 10 kg The diameter of the grinding of the workpiece max. 100 mm The accuracy of the machine at a length of 300/500mm is in 5 microns Repeatability of support up to 5 microns Ijdpjv Tav Tofx Anvoau Electrical components manufactured by ABB, Schnieder Painting in the final color according to the customer's wishes Warranty on works: 6 months Delivery time: negotiable For more information, call.

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, grinding length: 1,600 mm, grinding width: 500 mm, workpiece weight (max.): 900 kg, grinding wheel diameter: 355 mm, rapid traverse X-axis: 1 m/min, travel speed (max.): 25 mm/min, TECHNICAL DETAILS Table size: 500 x 1,600 mm Max. grinding area: 500 x 1,600 mm Max. distance from spindle center to worktable: 600 mm Load capacity (with magnetic chuck): 900 kg Axis parameters Longitudinal feed speed: 5–25 m/min Cross rapid traverse (X-axis): 50–1,000 mm/min Cross feed, incremental: 1–20 mm/stroke Cross hand feed (MPG): 0.005 mm/click Vertical rapid traverse (Z-axis): 50–500 mm/min Vertical automatic feed: 0.005–0.04 mm/stroke Vertical hand feed (MPG): 0.005 mm/click Grinding wheel Dimensions (outside diameter x width x bore): 355 x 20~50 x 127 mm Spindle speed: 1,440 rpm Drive capacities Spindle motor: 7.5 kW Hydraulic pump motor: 3 kW Servo motor, cross feed: 0.5 kW Servo motor, vertical feed: 2 kW Coolant pump: 0.125 kW Lubrication pump: 0.06 kW Total connected load: 14 kVA MACHINE DETAILS Dimensions & weight Iasdpsyymkcjfx Anvou Required installation space: 7,120 x 2,550 mm Height: 2,700 mm Machine weight: approx. 6,000 kg EQUIPMENT PLC + HMI automatic grinding control Integrated control for magnetic chuck Coolant tank Balancing arbor Grinding wheel flange and puller Wheel dresser stand MPG handwheels for Y/Z axis Operating manual Splash guard Standard grinding wheel Levelling wedges and bolts

Condition: used, Year of construction: 1986, Surface Grinding Machine MONOPRECIS 1DR - #2 Travel X: 400 mm Travel Y: 150 mm Maxi grinding height (Z): 220 mm Iedjy Nz Tkjpfx Anveau Year of construction: 1986 Axes X - Y - Z manual Magnetic chuck: manual / tilted Magnetic chuck dimensions: 255 x 130 mm Grinding wheel dimensions: Ø max 170 mm Voltage: 380 V Dimensions (L x W x H): 1300 x 1100 x 1600 mm Weight: approx 500 kg

Condition: excellent (used), functionality: fully functional, A very well-maintained surface grinding machine JAKOPSEN model: SJ 618. Grinding length: 450 mm. Grinding width: 200 mm. Isdoy Iuvvopfx Anvoau

Condition: new, Precision surface grinding machine MIOTAL FSM 3060 AH Table size: 300 x 600 mm Installation height: 500 mm Iaedpfx Anjd Sfd Eevou Max. Table load: 300 kg Motor power: 4.6 kW Connection: 400 V Dimensions: 2300 x 1790 x 2200 mm Weight, approx.: 2000 kg Equipment and scope of delivery: - All cast parts, e.g. machine stand, table etc. made of MEEHANITE® quality casting - Automatic cross and longitudinal feed - Permanent lubrication - Automatic cross lifting device - Splash guard on the rear - Grinding wheel - Grinding wheel flange - Honing device - Balancing mandrel - Balancing scale - Dressing diamond - Machine light - Leveling elements - Operating tool - Operating instructions - CE Special equipment of our storage machine: - Electric magnetic clamping plate 300 x 600 mm (fine pole) - 2-axis digital readout, accuracy 0.001 mm, X 450 / Y 500 mm - Automatic vertical infeed AD 5 (NC-controlled) for model AH - mode of operation: Automatic rapid traverse vertical and automatic fine feed vertical - Automatic demagnetization control for magnetic clamping plate - Coolant system with magnetic separator - Manual dressing device - Parts enclosure - Ergonomically arranged control panel - Additional grinding wheel flange - Ball screw for cross feed - Grinding wheel and flange for mild steel - Grinding wheel and flange for HRC55 Alternative equipment features / other machine configurations on request.

Condition: good (used), Year of construction: 1985, functionality: fully functional, The ELB SW 4/2 is a classic conventional surface grinding machine. Specific data may vary depending on the version (e.g., VA I, VAI-Z), but the key technical specifications typically fall within the following range: Machine type: Surface grinding machine (horizontal) Working area Grinding length: approx. 450 mm Grinding width: approx. 250 mm Max. workpiece height: approx. 280 mm Iajdpfx Anjyy Aczjvsu Grinding spindle Grinding wheel: Ø 250 mm × 25 mm width Bore: 51 mm Speed: approx. 1,430 / 2,900 rpm Spindle motor: approx. 2.5 kW (total power ~4.5 kW) Axis travels Vertical travel (Z): approx. 400 mm General data Total power: approx. 4.5 kW Machine weight: approx. 1,800 kg Dimensions (L×W×H): approx. 1,800 × 1,400 × 2,000 mm

Condition: like new (used), Year of construction: 2016, Jung Supromatic JF 520 Jung Supromatic JF 520 Surface Grinding Machine, year of manufacture 2016, very good general overhauled original condition. The machine comes from the technical center of a renowned German mechanical engineering company. Iodpfxjy Naw Is Anvsau Technical Data: Year of manufacture: 2000 Technical Data: Clamping area (L x W in mm): 600 x 200 Grindable area (L x W in mm): 600 x 250 Max. magnet size mm: 500 x 200 Max. grinding wheel dimensions mm: 225 (250) x 25 x 51 Distance table/spindle center mm: Max. 400 Table longitudinal feed traverse m/min: 1 – 20 Creep feed mm/min: 0 – 500 Grinding spindle drive speed RPM: 800 – 4200 Power kW (with creep feed): 1.6 – 2.2 Machine weight approx.: 2.0 t Accessories and Equipment: Magnet Coolant system Machine feet Grinding wheel About the machine: We are offering a Jung Supromatic JF 520 surface grinding machine, year of manufacture 2016, in very good condition. The machine is, of course, fully operational and has completed approx. 50 operating hours since overhaul. All slides move very smoothly and evenly. Even at high speeds, the Jung runs very quietly. This newer generation of surface grinding machines is very user-friendly and can achieve surfaces with a low Rz value. Take the opportunity to inspect this machine under power on site and see for yourself its condition. Scope of overhaul: Mechanical scope: Mechanical basic overhaul Hydraulics Feed Lubrication Cross and vertical adjustment Grinding spindle Dresser Painting to new-machinery quality Geometric scope: Guideway grinding at the manufacturer’s facility (optional) Scraping of the guideways Column pull, measurement, possible re-scraping/grinding, adjusting with pressure stones, check and pattern guideways Setting of cross-grinding on spindle head Aligning the dresser Regrinding the table and magnet Machine acceptance to manufacturer's inspection checklist Electrical scope: Renewal of complete electrics, all limit switches and buttons Conversion of X-axis from cam switch to contactless limit switches New control cabinet RSF position display (2- or 3-axis readout) Holding force regulation for 24V or EP-magnetic chuck Control system modernization New auxiliary control cabinet (control panel top right) Thyristor control for grinding spindle drive Manual cylindrical dressing with head or side dresser (for Diaform operation)

Condition: used, Year of construction: 2017, grinding range 600 x 300 x 400 mm magnetic plate size 600 x 300 mm distance spindle center to table 5500 mm max. table load 250 kg grinding wheel speeds 1.900 U/min longitudinal feed 680 mm cross travel 245 mm control STÖCKEL - ST-2 Surface Grinding Machine | STÖCKEL - FX 6030 ST-2 Ijdpfx Aneu Rt Tqsvoau The machine is in good condition. A machine video will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: FX6030 | FX-6030 | FX6030ST | FX 6030 ST

Condition: used, Year of construction: 1977, functionality: not functional, machine/vehicle number: 145240377, grinding length: 650 mm, grinding width: 350 mm, total height: 2,350 mm, total length: 2,800 mm, total width: 1,800 mm, table load: 300 kg, type of input current: three-phase, overall weight: 2,800 kg, input voltage: 380 V, space requirement height: 2,350 mm, Equipment: documentation/manual, We are offering this used ELB-Schliff Orion635 VA I-Z (SW 4/5) surface grinding machine, year of manufacture 1977. Iasdpfxsy Nhxys Anvju Operating voltage: 3×380 V Frequency: 50 Hz Direct current: 215 A Rated current: 15 A Fuse: 16 A Control voltage: 220 V DC voltage: 110 V If you have any questions or need more information, feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, We are selling a beautiful high-precision surface grinding machine from AMADA. The machine has low operating hours and is available for demonstration under power at the seller’s location. The machine’s enclosure has been completely renewed and it is in very well-maintained condition. Technical Data: Clamping surface: 550 x 200 mm Travel paths: 600 x 250 mm Height to spindle center: 90 to 400 mm Standard magnetic chuck size: 400 x 200 x 100 mm Grinding wheel size: 225 x 25 x 31.75 mm Grinding wheel speed: 500 – 5000 rpm Year of manufacture: Nov. 2016 Installation dimensions and weight: 2700 x 2400 x 1900 mm // Weight: 2400 kg Machine equipment: - FANUC Series 32i-Model B control Ijdpfxeyx A Nfo Anvsau - Machine enclosure (new) - Flanges - Dressing spindles (profile and groove grinding) - Belt filter - Integrated probe - Linear drive - Automatic balancing MPM - Ball screws and linear drive

Condition: used, Year of construction: 1989, MAKE GER, MADE IN SPAIN MODEL RS 10/60 YEAR TABLE LENGTH 1300.0 mm TABLE WIDTH 600.0 mm Iedpfx Anoy Du N Usvoau TRAVEL X AXIS: 1600.0 mm Y AXIS: 600.0 mm MAX DISTANCE (TABLE TO WHEEL) 800.0 mm MAX WORKPIECIE WEIGHT 1000 KGS GRINDING WHEEL SIZE 400.0 x 100.0 x 127.0 mm SPINDLE SPEED MAX 1500 RPM MACHINE DIMENSIONS 4600.0 x 2700 x 2600.0 mm MACHINE WEIGHT 7600 KGS PLUS ELECTROMAGNETIC CHUCK SIZE: 1000.0 X 600.0MM HYDRAULIC PACK COOLANT SYSTEM WHEEL MOUNTED DRESSER

Condition: good (used), Grinding range 650x450x325mm Iaodpfx Ansfbx A Hjvju Table size 600x350mm Magnetic plate 600x400mm MARCELS MASCHINEN CH

Condition: good (used), Grinding range 1000x500x630mm Table size 1000x400mm Wheel diameter 400mm Magnetic plate 1000x500mm MARCELS MASCHINEN CH Iodpfx Anefbx Dmsvjau

Condition: good (used), Grinding range 400x250x375mm Wheel diameter 300mm Magnetic plate 400x250mm Isdpfefbx Dwox Anvoau MARCELS MASCHINEN CH

Condition: good (used), Grinding range 800x500x480mm Iaodpfx Ansd Nmx Nsvou Table size 800x400mm Wheel diameter 400mm Magnetic plate 800x400mm MARCELS MASCHINEN CH

Year of construction: 2025, condition: new, Rotary Table Blasting Machines provide efficient and uniform surface cleaning for castings, forgings, and metal components. Using a rotating table and high-performance blast wheels, they remove rust, scale, paint, and contaminants to prepare parts for coating or further processing. Ideal for small to medium batch production, these machines offer consistent quality, reduced manual labor, and reliable performance in industrial environments. Iajdpfxjxzzi Te Anvju

Condition: good (used), Year of construction: 2008, grinding length: 1,250 mm, table length: 1,250 mm, table load: 1,200 kg, table width: 500 mm, spindle speed (max.): 2,600 rpm, spindle speed (min.): 1,000 rpm, overall weight: 9,300 kg, travel distance X-axis: 1,400 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, power: 185 kW (251.53 HP), input voltage: 400 V, space requirement height: 2,870 mm, Equipment: rotational speed infinitely variable, X-axis: grinding length 1,250 mm, travel 1,400 mm Y-axis: distance from table to spindle center 700 mm, travel 600 mm Iedpju Hiq Rsfx Anveau Z-axis: grinding width see note, travel 600 mm Note: The grinding area in the transverse direction (Z-axis) depends on the travel path and the grinding wheel width. Example: Travel path across = 600 mm Grinding wheel width 60 mm = grinding width 660 mm Grinding wheel width 100 mm = grinding width 700 mm See pictures for more technical data

Condition: good (used), Machine is in good working condition. Iodpfx Anowu Exnsveau

Condition: good (used), Year of construction: 1984, Machine is in good working codition. Iaodpfx Aexvikuenvou

Condition: new, neu ca. 3-6 Wochen ab Auftrag Türkei 5010 € 96.69 € 100 kg 150 mm Ijdpfx Anex Urqwjvjau 150 mm 360 ° 120 kgm 230 / 50 V / Hz 0.25 kW 0.25 kW 0.1 - 3 U/min 30 s 350 mm M12x6 mm 690 mm The positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted on the floor. The tables have radial T-slots that enable quick clamping of the workpieces. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. Foot pedal Cable for signal to welder Touchpanel for following functions: - rotation speed - operating modi (manual, segmentcycle, full circle) OPTION: Pneumatic centering attachement

Condition: new, neu ca. 3-6 Wochen ab Auftrag Türkei 24400 € 468.48 € 3000 kg 150 mm 150 mm 360 ° 135 kgm 400 / 50 V / Hz 1.1 kW 1.1 kW 1200 mm 700 - 950 mm The hydraulic positioners are available in standard sizes for load capacities from 1.000 kg to 3.000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. Isdpfxox Urqdo Anveau For heavy workpieces, the positioners are mounted to the floor. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. The rotation speed can be adjusted via a potentiometer.

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 146978, Knuth Surface Grinding Machine Flat HFS 2500C Working Area & Capacities Table dimensions: 250 x 500 mm Grinding area (max.): approx. 500 x 250 mm Maximum workpiece weight: 180 kg Distance spindle center to table surface: 450 mm Travel Distances & Feeds Iaedpfsy H Dg Iox Anvju Longitudinal travel (X-axis): 560 mm Cross travel (Y-axis): 275 mm Hydraulic table feed (X): 7 – 23 m/min Rapid traverse cross (Y): 990 mm/min Rapid traverse vertical (Z): 460 mm/min Spindle & Grinding Wheel Grinding spindle motor power: 2.2 kW Grinding wheel dimensions: 200 x 20 x 31.75 mm Graduation: Y-axis 0.02 mm / Z-axis 0.005 mm Dimensions & Weight Machine dimensions (LxWxH): approx. 2650 x 2150 x 1675 mm Total weight: approx. 1800 kg

Condition: used, Year of construction: 2021, max. travel distances (transverse x longitudinal) 280 x 600 mm distance spindle /table 500 mm Grinding surface of table 250 x 500 mm Grinding Wheel Dimension 355 x 25 x 127 mm Iedexp R D Nepfx Anvjau grinding wheel turning speeds 1.500 / 1.800 mm power requirement 2,2 kW In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!