Used Haas Vf 2 Ss for sale (230)

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, controller manufacturer: HAAS, table load: 680 kg, overall weight: 4,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, tool weight: 5,000 g, number of axes: 3, This 3-axis HAAS VF-2SSYT vertical machining centre was manufactured in 2016. It features a 30.0 hp spindle with a maximum speed of 12000 rpm and a torque of 122.0 Nm at 2000 rpm. The machine includes a 30+1 side-mount tool changer and supports a maximum table load of 680 kg. Rapid traverse rates reach up to 35.6 m/min. If you are looking to get high-quality milling capabilities, consider the HAAS VF-2SSYT machine we have for sale. Contact us for more information. Additional equipment • Air Requirement: 113 L/min at 6.9 bar • Internal Air Hose: 3/8 in • Air Coupling: 3/8 in • Min. Air Pressure: 5.5 bar • Coolant Capacity: 208 L Gkodpfxszzpl Nj Aatob Machine Benefits Technical Machine Benefits • Spindle nose to table (max): 610 mm spindle nose to table (min): 102 mm • Max torque: 122 nm at 2000 rpm • Drive system: inline direct-drive • Bearing lubrication: air / oil injection • Cooling: liquid cooled • Max cutting: 21. 2 m/min • Tool change time (average): 1. 80 s • T-slot width: 15. 90 mm to 16. 00 mm // t-slot center distance: 125 mm • Time between tool changes (average): 2. 40 s • 4th axis preparation Extra Information Dimensions: Dimensions of Machine (LxWxH): Domestic Pallet: 269 cm x 259 cm x 257 cm Export Pallet: 232 cm x 254 cm x 257 cm Weight (kg): Without SMTC: 3539 kg With 50+1 SMTC: 3675 kg With 70+1 SMTC: 4500 kg

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 1101058, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, We offer a used Haas VF-2SS vertical machining center, manufactured in 2013. - Manufacturer: Haas - Model: VF-2SS - Year of manufacture: 2013 - Technical condition: used, very good - Serial number: 1101058 - Machine type: vertical machining center The machine is fully functional and in continuous use. Throughout its operational life, it has primarily been used for machining soft materials – 90% of the work performed involved machining aluminum in a single-shift system. Gkjdjzzcmajpfx Aatob The machine has no history of accidents, has been operated by a single employee for the past 4 years, and operates correctly, being maintained in good technical condition. In 2022, it was transported from our branch in Germany to Poland, where it has been in operation since it was new. Included equipment: - Renishaw tool probe, - Renishaw workpiece probe, - external Haas coolant filter, - standard Haas machine equipment. - the machine is sold without a vise or fixtures. The machine is ready for further operation and can be inspected. It is possible to start the machine and demonstrate its operation. If you have any questions, please send a message or contact us by phone.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, table load: 680 kg, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 762 mm Travel Y-axis: 406 mm Travel Z-axis: 508 mm Table length: 914 mm Table width: 356 mm Table load capacity: max. 680 kg Spindle speed: 12,000 rpm Feed Rapid traverse X-axis: max. 35.6 m/min Rapid traverse Y-axis: max. 35.6 m/min Rapid traverse Z-axis: max. 35.6 m/min Gjdpfx Aajx Up Dhjtokb Tool Changer Capacity: 24+1 Tool holder: CAT 40 Max. tool diameter: 76 mm Tool change time: 1.6 s Chip-to-chip time: 2.2 s MACHINE DETAILS Machine weight: 3,629 kg

Condition: good (used), Year of construction: 2007, functionality: fully functional, HAAS VF-2SSHE + MIDACO Pallet System – 2007 CNC Vertical Machining Center with Pallet System For sale: HAAS VF-2SSHE CNC vertical machining center, equipped with a MIDACO pallet system. The machine is installed, in working condition, and available for inspection and testing while powered on, by prior arrangement. Technical data: Godpfxjzypt Re Aatekb Manufacturer: HAAS Model: VF-2SSHE Year of manufacture: 2007 Serial number: 1061369 X-axis travel: 762 mm Y-axis travel: 406 mm Z-axis travel: 508 mm Table size: approx. 914 × 356 mm Spindle taper: ISO 40 Automatic tool changer MIDACO pallet system included Power supply: 360–480 V / 3 phase Machine in good working condition Inspection and test run possible while powered on The MIDACO pallet system allows workpiece preparation outside the machining area and can help reduce loading and unloading times, making the machine particularly suitable for series production. Further technical details and the exact machine configuration can be verified during an on-site inspection.

Condition: used, Year of construction: 2016, Spindle speed range: 12000 1/MIN Spindle motor power: 22.4 kw X-AXIS Movement: 1270 mm Y-AXIS Movement: 508 mm Z-AXIS Movement: 635 mm Table: 1321 x 495 mm Distance table to spindle nose 742 mm P-Cool Cat 40 ATC 30 + 1 positions Chip conveyor Gjdpfx Aaezzz Tlstokb Through Spindle Cooling 4th axis HRT210SS coolant tank 208 Liter Extra Coolant filtration Auto tool measurement High speed milling CT-style tool changer grippers Visual part programming Probe The machine is available for inspection and test run at our stock!

Condition: like new (used), Year of construction: 2024, Traverses X Y Z: 762 x 508x 508, Gedpfx Aaov Tah Ajtjkb Table 914 x 457mm, Spindle speed 0 – 12,000rpm, Spindle taper BT40, Spindle Motor 22Kw, HAAS Control, 30 Station ATC, through spindle Coolant , Low Volt light, swarf auger, spindle probe, tool setter

Condition: excellent (used), Year of construction: 2010, operating hours: 1,049 h, functionality: fully functional, HAAS VF-2 + 4th axis Year of manufacture: 2010 Condition: good, machine is functional and in operation Cutting time: only 1,049 hours Machine accuracy: approx. 0.01–0.02 mm Technical specifications: Travel in X / Y / Z: 762 × 406 × 508 mm Work table dimensions: 914 × 356 mm Maximum table load: 1,361 kg Spindle taper: ISO 40 Gkedezyabrjpfx Aatsb Maximum spindle speed: 12,000 rpm Tool magazine: 24 positions 4th axis – original Haas Renishaw tool probe Control system: HAAS CNC Chip conveyor

Condition: used, Year of construction: 1997, Haas VF-2 CNC Vertical Machining Centre with Haas Control. S/No. 10064 (04/1997), Table size 915mm x 355mm, 20 Tool ATC, BT40 Spindle Taper Location: These lots are located in Andover, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Gedpfxszy N H De Aatekb

Condition: ready for operation (used), Year of construction: 2018, General Data Machine weight 3700 kg Measurements height 2800 mm Main Drive Spindle Speed 12000 RPM Spindle motor power 22.4 kW Tool taper BT 40 Number of axis 4 Gkedox D D N Ispfx Aateb Dimensions Machine Length 2700 mm Table Table load 680 kg Movement X-Axis Movement 762 mm Z-Axis Movement 508 mm Y-Axis Movement 406 mm Tools Max weight 5 kg This 4-axis HAAS VF-2SS-EU vertical machining center was manufactured in 2018. It features a 762 mm X-axis travel, 406 mm Y-axis travel, and 508 mm Z-axis travel. Equipped with a BT-40 spindle achieving up to 12,000 rpm and a side-mount tool changer with a 30 + 1 tool capacity. Rapid traverse rates reach 35.6 m/min. Consider the opportunity to buy this HAAS VF-2SS-EU vertical machining center. Contact us for more information about this machine. Application Types Milling

Condition: excellent (used), Year of construction: 2008, HAAS VF-2SSYTCE cnc machining center Year: 2008 Technical details: X axis travel 762mm Y axis travel 508mm Z axis travel 508mm Spindle nose BT 40 Spindle speed max 12000 rpm Power 22.4 kW Tool changer 24 positions Maximum tool diameter 64mm Maximum tool length 279mm Maximum tool weight 5 kgs Table size 914x457mm Maximum weight allowed on table 680 kg Machine weight: 3600 kg Machine dimensions: 2670 x 2600 x 2570 mm Accessories/options: Gkedpfx Aaszyk N Heteb Spiral chip conveyor Inline direct Spindle Drive 12000 rpm spindle Extended Y-travel, 508 mm Digital remote control Prepared for 4.axis ( drive and wiring included ) USB port Coolant tank Under power in our warehouse, possible to test it anytime!

Condition: used, Year of construction: 2014, operating hours: 7,500 h, 5-AXIS MACHINING CENTER BRAND: HAAS VF-3 SS YEAR OF FIRST INSTALLATION: 2014 TABLE DIMENSIONS: 1,219 mm x 457 mm MAXIMUM TABLE LOAD: 800 KG TRAVEL: X: 1,016 mm Y: 508 mm Gksdpjzminnefx Aatjb Z: 635 mm SPINDLE SPEED: 12,000 RPM TOOL MAGAZINE: 40 POSITIONS HIGH PRESSURE / INTERNAL SPINDLE COOLING RENISH PROBE PRESETTING ADJUSTABLE COOLANT NOZZLE

Condition: good (used), Year of construction: 2013, Haas VF4SS Year of manufacture: 2013 BT 40 spindle RPM: 12,000 TSC (Tool Side Center) WIPS (Wireless Intuitive Probe System) 4th axis: HRT 210 Gkedjzuazhspfx Aatsb

Condition: ready for operation (used), Year of construction: 2023, operating hours: 2,403 h, functionality: fully functional, machine/vehicle number: 1201414, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! Godpfxezl Rzyo Aatskb TECHNICAL DETAILS Travel range X-axis: 1,270 mm Travel range Y-axis: 508 mm Travel range Z-axis: 635 mm Spindle speed: 12,000 rpm Tool interface: CAT40 Tool positions: 30 MACHINE DETAILS Operating time: 11,136 hours (as of July 26, 2026) Machining hours: 2,403 hours (as of July 26, 2026) Cycle hours: 3,364 hours (as of July 26, 2026) EQUIPMENT Internal coolant supply Renishaw intuitive wireless probe system Mist collector Chip conveyor Approx. 15 tool holders

Condition: good (used), Year of construction: 2015, Haas ST-20 SS Year of manufacture: 2015 Tool setter Gkedpfx Aajzyymzetjb Tailstock Chip conveyor Tooling

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 40164, controller manufacturer: HAAS/FANUC, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 24, TECHNICAL DETAILS Spindle speed: 12,000 rpm MACHINE DETAILS Control: HAAS/FANUC Electrical data Voltage: 360/480 V Gkedpfx Aaexuih Rjtjb Phases: 3 Frequency: 50/60 Hz Full load: 40 A Maximum load: 70 A EQUIPMENT 24-position tool changer BT40 Belt filter system / high-pressure pump KNOLL KF 150

Condition: excellent (used), Year of construction: 2013, Swing 806mm, Swing over cross slide 527mm, maximum cutting diameter 305mm, 533mm maximum cutting length, 50mm Bar capacity, 8” chuck, 20Hp Spindle Motor, C axis 0.01 degrees, Y axis +/- 51mm, 4000rpm spindle speed, Godpfxjy Ex T Ts Aatokb 6,000rpm milling speed, 12 Station turret, parts catcher, tailstock, tool setter, coolant

Condition: ready for operation (used), Year of construction: 2015, operating hours: 7,100 h, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, table load: 794 kg, TECHNICAL DETAILS Travel X: 1,270 mm Travel Y: 508 mm Travel Z: 635 mm Rapid traverse speed X/Y/Z: 35.6 m/min Distance spindle nose to table max.: 742 mm Distance spindle nose to table min.: 107 mm Max. spindle speed: 12,000 rpm Spindle drive power: 22.4 kW Table dimensions: 1,321 x 495 mm Max. table load: 794 kg Godpfxextbtij Aatjkb Tool changer positions: 24+1 Max. tool weight: 5.4 kg Tool change time: 1.8 s MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): approx. 3,000 x 2,500 x 2,600 mm Weight: approx. 6,800 kg Cycle start time: approx. 10,100 h Feed time: approx. 7,100 h EQUIPMENT Haas control with synchronous tapping Wireless probing system Coolant system with programmable coolant nozzle Spiral chip conveyor

Condition: excellent (used), Year of construction: 2006, HAAS VF-2BHE cnc machining center Year: 2006 Technical details: X axis travel 762 mm Y axis travel 406 mm Z axis travel 508 mm Spindle nose BT 40 Spindle speed max 7500 rpm Power 11 kW Tool changer 20 positions Table size 914 x 457mm Maximum weight allowed on table 680 kg Machine weight: 3600 kg Machine dimensions: 2670 x 2600 x 2570 mm Accessories/options: Gsdpfxjzylhks Aatskb Spiral chip conveyor Remote control Prepared for 4.axis ( drive and wiring included ) Coolant tank Under power in our warehouse, possible to test it anytime!

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 1183016, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, workpiece length (max.): 1,270 mm, workpiece width (max.): 635 mm, workpiece height (max.): 508 mm, workpiece weight (max.): 794 kg, table width: 475 mm, table length: 1,321 mm, overall weight: 6,033 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 2,240 W, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, MACHINE Vertical machining center, HAAS, VF-4SS STANDARD EQUIPMENT: CNC control, 4 axes, HAAS type (NGC version), compatible with Fanuc, ISO programming, G-codes ISO40 spindle taper, CT type 1 GB memory capacity 15" LCD monitor, touchscreen and USB port Ethernet + WiFi network card Early voltage drop detection module (prevents the effects of voltage drops) HaasConnect – remote monitoring of machine operating status via the Internet, VNC and DPRNT protocol Program restart – ability to start the program from any block RunStopJogContinue – ability to move the tool without interrupting the program SafeRun – active anti-collision system (minimizing the effects of collisions) Electronic handwheel Spindle cooling system Temperature compensation for ball screws Protective cabin with sliding front doors and side windows Side magazine with 30 positions Memory lock Spindle taper air blow system Thread cutting without a compensating chuck (rigid) Installation for connecting compressed air Cooling system with a pull-out coolant tank, filled with coolant Automatic central lubrication system Machine tool lighting "Guns" for air and coolant (mounted on the front of the machine) 4AXD – Machine preparation / connections, wiring / For connecting the table, without a table Gedpfezt Nlmex Aatokb AUGER – Screw chip conveyor HSM – Faster processor with look-ahead function, accelerating the machining of shapes with 3-axis interpolation ACF – Additional 25 μm filtration system, essential for machining cast iron, aluminum, wood, and phenol-based and other dusty materials TSC* – Through-spindle cooling, pump with increased power /21 bar, 22 l/min/ (ACF option required) WIPS-R – Renishaw probe set, wireless, for measuring tool radius and length, for measuring and setting using (graphic) measuring cycles. SO – Spindle orientation MACRO – Parametric programming COORD – Scaling and rotation of the coordinate system VPS (Visual Programming System) – graphic machining cycles, expansion and creation of custom cycles

Condition: like new (used), Year of construction: 2023, operating hours: 3,363 h, functionality: fully functional, machine/vehicle number: 1201414, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, total height: 257 mm, total length: 333 mm, total width: 233 mm, table width: 495 mm, table length: 1,320 mm, table load: 794 kg, rotational speed (min.): 12,000 rpm, overall weight: 6,200 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 2,402 h, spindle motor power: 22 W, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, We have two machines: SPECIAL PACKAGE PRICE – €125,000 FOR BOTH MACHINES Haas VF-3 YT50 (Ad ID A22113533) + Haas VF-4SS (Ad ID 22522747) Purchase both machines together for €125,000. Excellent opportunity to acquire a complete Haas machining package. • Haas VF-4SS • Taper CAT40 • Spindle: 12,000 rpm Inline Direct Drive • TSC (Tool Side Center) • Renishaw WIPS (Wireless Inspection Probe System) • High-Speed Machining • Mist Condenser • Chip Conveyor • 30 ATC (Automatic Tool Changer) • Cutting Hours: 2,402 hours • Cycle Hours: 3,363 hours • First owner (company) • Complete service history Gkjdpfx Aajztm N Noteb • Maintenance performed by authorized service provider Teximp d.o.o. • No crashes or major repairs • + Approximately 15 tool holders • Company-owned machine, located in Croatia • Immediately available • Operational and available for inspection • Ready for immediate production

Condition: used, Year of construction: 2009, Haas VF-2CDE CNC Vertical Machining Centre with Haas CNC Control. S/No. 1075853 (11/2009), Table size 415mm x 355mm, 20 Tool ATC, BT40 Spindle, Swarf Argur with Rotary Table Brushless Converter for use with 4th Axis. Location: These lots are located in Andover, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Gkedpfezx Axwsx Aatsb

Condition: ready for operation (used), Year of construction: 2022, controller manufacturer: HAAS, spindle speed (max.): 12,000 rpm, This 3-axis HAAS VF-2SSYT with Pallet Pool 3+1 was manufactured in 2022. It features a 30 hp, 22.4 kW in-line spindle, capable of 12,000 rpm, and a 50+1 tool changer. It includes a 15" screen and a 3+1 pallet pool with 900x450 mm pallets. If you are looking to get high-quality milling capabilities, consider the HAAS VF-2SSYT machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits • Tool changer: 50+1 tool changer • Extra coolant: 360 liters Gkodsx Hbluopfx Aatob • Pallet pool: 3+1 pallet pool with 900x450 pallets • 21 bar trough spindle • 15" screen Extra Information Machine still under power

Condition: good (used), Year of construction: 2010, X Y Z: 1270 x 508 x 508mm, table 1324 x 457mm, Godpfx Aajxpw Rvetskb 12000 rpm, BT 40, HAAS Control, 24 Station ATC, 40HP, chip auger, coolant, Haas TR210 5 axis trunnion table

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 1125318, SPECIFICATION Travel X axis stroke 762mm Y axis stroke 406mm Z axis stroke 508mm Distance spindle nose to table 102-610mm Table Width 536mm Length 914mm Max. Weight on table 1361kg T Slots: width 16mm : pitch 125mm   SPECIFICATION Cont’d Spindle Taper size No.40 Speed 0-8100rpm Bearings Bearing lubrication Air/oil injection Cooling Liquid cooled Gkedpswx I N Djfx Aatsb Motor Spindle motor, max. rating 22.4kW Feedrate Rapid X, Y & Z axis 25.4m/min Max. Cutting feedrate 16.5m/min Toolchanger Capacity 20 tools Type BT40 General Approximate machine weight 3750kg Air supply (min) 113lpm, 6.9 bar MACHINE EQUIPPED WITH: - Haas (Fanuc compatible) CNC Control system Programmable coolant nozzle Automatic lubrication system Enclosed guarding Swarf auger

Condition: used, Year of construction: 2023, operating hours: 120 h, Almost like new, a Haas TRT210 two-axis rotary table with only approximately 120 operating hours. The table was used exclusively on a Haas VF-4 (see separate listing) and is in flawless optical and technical condition. The TRT210 is Haas’s compact 5-axis solution for medium-sized VMCs, and it takes up minimal space by being mounted at one end of the machine table – the rest of the mounting surface remains free for vises or other fixtures. Plug-and-play connection to any Haas milling machine with 4/5-axis drives and the corresponding NGC control software. In addition to the rotary table itself, the scope of supply includes the matching toe clamp kit for direct mounting on the machine table, as well as a Renishaw riser block for side mounting of the radio receiver (OMI/OMP) – this ensures reliable signal transmission to the measuring probe even over the full A-axis swivel range. Inspection possible by appointment. Shipping can be arranged. Technical data: - Table diameter: 230 mm (9.10") - Max. pitch circle: 368 mm (14.5") - Max. workpiece weight on table: up to approx. 90 kg - Hole pattern: 2× 6-hole pattern A-axis (swiveling): - Swivel range: ±120° - Max. speed: 80°/s - Max. torque: approx. 407 Nm (300 ft-lb) - Braking torque at 6.9 bar: approx. 540 Nm - Accuracy: ±25 arc-sec - Repeatability: 10 arc-sec - Resolution: 0.001° B-axis (rotating): - Rotation range: 360°/continuous - Max. speed: 100°/s - Max. torque: approx. 285 Nm (210 ft-lb) - Braking torque at 6.9 bar: approx. 270 Nm - Maximum runout: 0.013 mm (0.0005") - Accuracy: ±15 arc-sec - Repeatability: 10 arc-sec - Resolution: 0.001° General: Gedpfoy Tp Hgox Aatjkb - Connection voltage: 115 VAC, approx. 15 A - Compressed air max.: approx. 10 bar (150 psi) - Weight: approx. 220 kg Scope of supply: - Haas TRT210 rotary table complete - Original Haas servo connection cable for A and B axes - Toe clamp kit (for mounting on the machine table) - Renishaw riser block for side receiver mounting - Original documentation