Used Labotek Ddm 60 Alb for sale (21,581)

Condition: reconditioned (used), Year of construction: 2015, operating hours: 30,143 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 570 kg, overall weight: 20,000 kg, oil tank capacity: 600 l, power: 37 kW (50.31 HP), year of last overhaul: 2025, volume flow: 800 m³/h, Technical data baler: Manufacturer Presona AB, Sweden Type LP 60 VH1 Year of construction 2015 Total operating hours, 30,143 hours, as of July 2025 Effective pump running time onl 6,527 hours, as of July 2025 Number of pressed bales 115,193 bales, as of July 2025 Press force pre press 25 t Main press force 60 tonnes Specific pressing force 73N/cm² Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Theoretical throughput capacity 800 m³/hour Throughput capacity under operating conditions 350 m³/hour Bale dimensions 1,100 x 750 mm Drive power 37 kW Tying 5-fold vertical, fully automatic Throughput capacity with a Bulk weight of 50 kg/cbm 11 to 14 tonnes/hour Bale weights 420 to 570 kg, depending on material Hydraulic oil tank volume 600 litres Baler dimensions assembled with hopper 10,100 x 3,750 x 4,310 mm (l x w x h) Transport dimensions excluding press 10,100 x 2,400 x 3,000 mm (l x w x h) Machine weight press approx. 20 tonnes Condition of the press: The press was partially overhauled in our workshop and then tested in manual and automatic mode. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Grease cartridges of the automatic roller lubrication system replaced Slide rails cut out from the press floor in the press room Underbody reinforced with welded sheets New HARDOX slide rails welded in Wire station with deflection rollers for the lower wire cleaned and made operational Slide rails cut out from the floor in the press channel New HARDOX slide rails welded in Both side walls of the press channel dismantled, derusted Worn side wall plates cut out Complete side walls covered with new wear plates and welded Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Hsdpfxozdny Rj Abhop Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Machine checked, general maintenance work carried out and press tested in manual and automatic mode Comments: The press is sold without a conveyor belt and without wire stations. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), functionality: fully functional, MKS Instruments. Inc. plasma generator, AX7670 60 R, ASTRONi Model: AX767060R Type: ASTRONi Hjdpfx Aeuyi U Aobhep 200-208V AC 50/60Hz 30A

Year of construction: 2010, condition: excellent (used), 414 USED Bakery oven, trolley, rotary, 60x80 cm. Year of manufacture: 2010. EXTERNAL DIMENSIONS (in cm): - W: 155, - L: 175 (with hood 237) - H: 263. The USED device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. Hodszdra Iopfx Abhjp The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, UKRAINIAN.

Condition: used, Rexroth AKP71 Ergotech 60-80t- compatible with Ergotech 60-80t - removed from Demag ET 6 system - with Rexroth valve R900720216 - removed from running machine - fully functionalmanufacturer: Rexroth Hsdpjrr Eg Nofx Abhsp type: AKP71 spare part no.: 1 manufacturer no.: R900751367 type code: SYDFEE-2X/071R-PRA12KD3-0000-A0A1VX2-006 (SYDFEE-20/071R-PRA12KD3-0000-A0A1VX2-006)The digit before the first slash describes the unit series. For this reason, this digit of the type code on your old spare part may differ. If you have any questions, please do not hesitate to contact us. Dition: gebraucht

Condition: used, Rexroth AKP45 Ergotech 60-80t- compatible with Ergotech 60-80t - removed from Demag ET 6 system - with Rexroth valve R900720216 - removed from running machine Hsdpforr Ef Dox Abhjp - fully functionalmanufacturer: Rexroth type: AKP45 spare part no.: 1 manufacturer no.: R900751366 type code: SYDFEE-2X/045R-PRA12KD3-0000-A0A1VX2-006 (SYDFEE-20/045R-PRA12KD3-0000-A0A1VX2-006)The digit before the first slash describes the unit series. For this reason, this digit of the type code on your old spare part may differ. If you have any questions, please do not hesitate to contact us. Dition: gebraucht

Year of construction: 1996, condition: good (used), Here we offer a Voetsch drying cabinet, heating cabinet, and heat oven. Hedpfx Aozdiyhjbhep Voetsch NTU 60/60 250°C Nominal temperature: 250°C Connection voltage: 400 V 3 (N) PE AC, 50/60 Hz Internal dimensions: Width 600 mm / Height 600 mm / Depth 600 mm External dimensions: Width 1000 mm / Height 1675 mm / Depth 1300 mm Forced air circulation fan Type: Voetsch NTU 60/60 Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: good (used), Here, we offer a Stäubli robot RX 60 with a control unit. Stäubli robot RX 60 with control unit CS7MB RX60 and Manual Control Operator. Type: Stäubli robot RX60 Control unit: CS7B RX60 Lifting weight (nominal load - kg): 2.5 kg Total weight: 44 kg Hedszditmspfx Abhop Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone. Written orders can be placed via email or fax.

Condition: good (used), Stäubli Type: RX60 L Hsdpfxozdimgs Abhep Stäubli RX 60 L robot with control unit and handheld control panel Control unit RX60 Lifting capacity (nominal load - kg): 1.5 kg Suitable for assembly cell / robot cell! Total weight: 44 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), functionality: fully functional, Profile steel cutting machine, Peddinghaus Peddiworker Hjdpfxszhhcto Abhep Manufacturer: Peddinghaus Model:

Condition: used, Year of construction: 1998, functionality: fully functional, clamping force: 600 kN, screw diameter: 35 mm, clearance between the columns: 325 mm, displacement volume: 131 cm³, injection pressure: 1,450 bar, overall weight: 4,100 kg, Equipment: documentation/manual, The machine is in working order and can be inspected during production. Hjdpfx Abszd Tu Hshsp

Condition: used, Year of construction: 2017, total length: 1,500 mm, total width: 900 mm, total height: 1,700 mm, Empty weight: 1.400 kg Steel round: 40mm Steel flat: 200x20mm / 300x15mm Notching + Punching + cutting - Year: 2017 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 155976 Hodpfxowraazj Abhjp - Drive system: Conventional - Punching force [ton]: 60 - Round bar cutting capacity [mm]: 40 - Motor power: 4.0kW - Transport dimensions: 1500mm x 900mm x 1700mm (l x w x h) - Transport weight [kg]: 1400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 2005, operating hours: 39,256 h, functionality: fully functional, travel distance X-axis: 780 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller model: Heidenhain iTNC 530 , rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range X-axis: 780 mm Travel range Y-axis: 560 mm Hjdpszcqa Sjfx Abhop Travel range Z-axis: 560 mm B-axis, infinitely adjustable: 150° (-120°/+30°) Rapid traverse rate (X / Y / Z): 50 m/min Feed rate: 20 - 15,000 mm/min Spindle speed (max.): 12,000 rpm Main spindle drive power: 28 / 19 kW Max. torque: 125 Nm Tool interface: SK 40 Number of pallets: 2 Pallet size: 630 x 500 mm Max. load: 400 kg Table speed range: max. 30 rpm Number of tool positions: 120 Max. tool diameter: 80 mm Max. tool diameter with free adjacent tool pocket: 160 mm Max. tool length: 315 mm Max. tool weight: 8 kg MACHINE DETAILS Control system: Heidenhain iTNC 530 Total power consumption: 64.2 kVA Dimensions & Weight Footprint: approx. 7.0 x 7.0 x 2.8 m Machine weight: approx. 12.0 t Operating Hours Operating hours: 39,256 h Power-on hours: 72,107 h EQUIPMENT Chip conveyor Coolant system High-pressure cooling 40 bar through-spindle coolant Paper band filter Pallet changer, 2 positions Tool breakage monitoring According to the seller, the spindle was presumably replaced. However, no service report is available to confirm this. The machine's data storage was renewed in January 2026. No CE declaration of conformity is available in DIN A4 or PDF format.

Condition: used, Year of construction: 2016, functionality: fully functional, working width: 600 mm, warranty duration: 12 months, input voltage: 400 V, total height: 1,250 mm, total width: 1,000 mm, total length: 1,080 mm, noise level: 65 dB, We offer Parts Washer PC 60/130 T for sale Catalogue number: 1.626-704.0 Year of manufacture: 2016 All devices purchased from us come with a 12-month WARRANTY. Equipment features: • Operating hours counter • Stainless steel safety grate • Swivel castors, 2 lockable • Timer switch • Water level control Technical data: • Pressure: 1.5 / 0.15 bar / MPa • Pump performance: 4500 l/h • Connection power: 5.5 kW • Working diameter: 600 mm • Working height: 310 mm • Housing/frame: Stainless steel (1.4301) • CE certified • Heater power: 4.5 kW Hjdpfjwzwuzjx Abhep • Maximum temperature: 80°C • Adjustable wash time: 1 / 30 min • Load capacity: 130 kg • Sound pressure level: 65 dB(A) • Tank capacity: 100 l • Number of phases: 3 Ph • Frequency: 50 Hz • Voltage: 400 V • Dimensions (L x W x H): 1080 x 1000 x 1250 mm The washing process is fully automated, with easy operation ensured by a clear control panel and indicator lights displaying all working stages. The washing fluid temperature is maintained within the range of 35 to 80°C and is controlled via thermostat. Thanks to specially designed housing profiles (mechanical labyrinth seals), the PC 60/130 T operates without perishable rubber seals. Gas struts equipped with dampers guarantee effortless lid opening, while a ball valve enables easy draining of the cleaning fluid. The Kärcher parts washer operates in a closed-circuit system (using an electric pump) with a water-based cleaning solution instead of solvents, ensuring that the operator is not exposed to hazardous vapours.

Condition: used, Length: 250 cm Hjdpfezdnqiex Abhep Width: 60 cm Sideboard height: 10 cm Overall height: 29 cm Food-grade conveyor belt Acid-resistant steel Please check out my other listings.

Condition: used, Length: 408 cm Belt width: 60 cm Working width: 62 cm – with side guards and a skirt Side guard height: 11 cm Hjdpfxjzdnnho Abhep Total height: 24 cm Drum diameter: 15 cm Belt suitable for food processing Made of acid-resistant steel Manufacturer: Haith The price is for one unit. Please check my other listings.

Year of construction: 2010, condition: used, Length: 406 cm Width: 60 cm Working width: 56 cm Sideboard height: 8 cm Hedszdnm Depfx Abhsp Overall height: 21 cm Roller diameter: 11.5 cm Power: 0.65 kW Food-grade conveyor belt Stainless steel Manufacturer: Haith The stated price is for one unit. Please see my other listings.

Condition: good (used), Year of construction: 2005, Eckold tool ECKOLD - LFS 60 S MACH-ID 3794 Make: ECKOLD Type: LFS 60 S Year: 2005 Hjdpfx Abjzdgkpohep Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Eckold tool ECKOLD - LFS 60 S MACH-ID 3796 Make: ECKOLD Type: LFS 60 S Hodpfx Aezdgi Esbhep Year: 2005 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2001, operating hours: 38,850 h, clamping force: 25 kN, displacement volume: 20 cm³, injection pressure: 1,810 bar, overall weight: 1,900 kg, screw conveyor diameter: 18 mm, terms of delivery: EXW (ex Works) delivery time: on request Hsdpfx Aboyt R S Ashjp terms of payment: 100% prior to delivery

Condition: used, functionality: fully functional, machine/vehicle number: 516328E00014, Year of construction: 2014, operating hours: 8,839 h, load capacity: 4,500 kg, lifting height: 4,880 mm, fuel type: electric, mast type: simplex, construction height: 3,150 mm, fork carriage width: 1,300 mm, fork length: 2,400 mm, empty load weight: 6,950 kg, drive type: Elektro, Electric 4-wheel forklift Chassis number: 516328E00014 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Standard Speed class: 15 Condition: As new Technical condition: Very good Battery voltage: 80V Battery capacity: 930Ah Battery manufacturer: SBS Battery type: PzS Battery year: 2019 Battery condition: 60 - 80% Description: STILL RX 60-45 electric forklift Year of manufacture: 2014 Operating hours: 8,840 Equipment: Standard mast Full cabin (enclosed operator cabin) Fork positioner Sideshift Battery tested and ready for use Condition: Used, in good visual and technical condition. The machine is immediately operational. Normal signs of use present. UVV: UVV inspection will be carried out before delivery. Errors and prior sale excepted. Additional features: 3rd valve, 4th valve, heater, full cabin, exterior mirrors, joystick, wiper, seat. Hjdpfxjy Ap S Io Abhop

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 2,177 h, machine/vehicle number: 10067745, empty load weight: 205 kg, construction height: 1,400 mm, fuel type: electric, drive type: Elektro, working height: 2,997 mm, Vertical lift Chassis number: 10067745 Condition: Ready for use and fully functional Technical condition: good Hedpfxeuhwm Ho Abhjp Battery Volt: 24V Battery Ah: 219Ah Description: Crown WAV 60-118 No.: C Year of construction: 2018 Operating hours: 2,177 The device is visually and technically in good condition. Charger on request Fast and uncomplicated transport possible by arrangement! The advertisement only serves to identify the device! A detailed description of the condition and possible equipment will be provided individually on request! Subject to errors and prior sale, sale only to tradespeople. All used goods are sold without warranty or guarantee. If you have not found the forklift you are looking for, please contact us. We have a large selection of other equipment on site.

Condition: used, Technical specifications: Briquette diameter: 60 mm Briquette length: 50 mm Tank diameter: 1000 mm Tank height: 930+1000+2400 (filter) mm Capacity: ~60 kg/h Power supply: 380V Hjdpfozd Erdjx Abhjp Motor power: 5.5 kW Safety switch Option to purchase the filter separately Filter dimensions: Connection diameter: 1000 mm Width: 1700 mm Height: 2400 mm Overall dimensions: Length: 1600 mm Width: 1200 mm Height: 1500+1000+2400 mm

Year of construction: 2014, condition: used, Leistritz ZSE 60 MAXX-36D Extrusion Line (2014) comprising Koch Technik and Scholz Dosiertechnik feeding system dosing units Leistritz ZSE 60 MAXX-36D twin-screw extruder with 2x 60mm diameter screws 36:1 L/D ratio, co-rotating 8-barrel housing section, electrically heated and water-cooled 2 degassing ports 1200 rpm maximum screw speed 495kW motor with Flender direct-driven gearbox Free-standing control panel with microprocessor and interconnecting wiring BD Plast BDL double screen changer Ettlinger ERF 200 melt pump Hodpfozb N Hzox Abhep Econ EUP 600 pelletizer Stainless steel water bath incl 2x sifters on legs Tredkamp 1C-T 10,000L stainless steel mixing silo Motan 14,000L mixing silo on legs with elevator Big bag system

Condition: used, functionality: unexamined, Year of construction: 1990, Clark DPL 60 LPG forklift, nominal load capacity 6000 kg, lifting height 6000 mm. Hodszczllopfx Abhop

Condition: new, Year of construction: 2022, approx. 14 running meters, height: 550 cm, shelf load: 3000 kg, pallet racking, heavy-duty racking, high-bay racking, industrial racking, racking immediately from stock Data : - Height : approx. 550 cm - Depth : approx. 110 cm - Length : approx. 14 running meters - Load: 3000 kg shelf load - Galvanized uprights - Crossbars 270 x 14 x 5 cm, T30 - Crossbars in orange - New BLT / PR55 - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : - 06 x upright approx. 550 cm x 110 cm, disassembled. - 30 x crossbar approx. 270 x 14 x 5 cm, T30. - 60 x safety pins. - Levels: Floor + 3 - 60 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 2220,00 € net Hsdpfx Ajzhv I Rjbhjp plus legally valid VAT. You will receive an invoice with VAT shown. The pre-assembly of the frames can be carried out by us for a small surcharge of 12.50 €/net per piece. Transportation : Delivery can be carried out by our partner forwarding agency on request, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.