Used Langguth V 80 Eimerentstapler,Entstapler for sale (45,615)

Condition: excellent (used), Vötsch Type: VBT 03/500 Air-cooled Temperature test chamber with spray device Technical description: Data for temperature tests without water: Temperature range -30°C to +80°C Temperature deviation in steady state according to IEC 60068-3-5 dependent on the test chamber temperature over time ± 1 K Temperature change rate according to IEC 60068-3-5 Heating: approx. 2 K/min. Cooling: approx. 2 K/min. Data for temperature tests with water Temperature range +5°C to +80°C Possible water level -10 mm to 540 mm Water level = -10 mm The water level is below the insert grid Water level = 0 mm The water level is at the top edge of the insert grid Data for standard spray device Number of spray nozzles: 6 Spray volume per nozzle: 0.5 l/min Data for spray device according to EN 539-2, Method B Number of spray nozzles: 6 Spray volume per nozzle: 4.5 l/min Additional flooding nozzles: 2 Spray volume of additional nozzle: 6 l/min Kdjdewc Nvgopfx Apdsn Compressed air consumption: approx. 3 m³/h Data for water tank with pre-temperature control Volume: approx. 2000 l Temperature range for pre-temperature control +5°C to +40°C Temperature change duration Cooling of +18°C to +5°C approx. 15 h Heating from +15°C to +40°C approx. 10 h Installation and Operation Data: Test chamber: Width 1120 mm, Depth 840 mm, Height 540 mm Housing: Width 2700 mm, Depth 1300 mm, Height 1575 mm Water tank: Width 1100 mm, Depth 800 mm, Height 2200 mm Plug-ins 1 50 mm diameter plug installed on the left Test chamber capacity: approx. 500 liters Refrigerant R-404a Electrical connection: Nominal voltage 3/N/PE AC 400V ± 10% 50Hz Nominal power approx. 26 kW Nominal current approx. 44.0 A (neutral conductor loaded) Fuse protection 63 A gG, on-site Weight approx. 890 kg net For your safety, please note the following information! The following steps are carried out on our chambers in advance: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: S17678, input voltage: 400 V, type of input current: three-phase, power: 22 kW (29.91 HP), input current: 45 A, Excellent condition machine, lightly used, undamaged, year 2019. We speak English, German, and ex-Yugoslav languages. Contact also possible via WhatsApp. Ksdpjx Dq D Ssfx Apdodn

Condition: ready for operation (used), Year of construction: 1999, Make: HERMLE Type of machine: C 800 V Year of manufacture: 1999 Control system: Heidenhain 430 Machine's weight: 7000 kg Tool holder: SK 40 x-travel: 800 mm Kjdpfeyfgtaox Apdedn y-travel: 600 mm z-travel: 500 mm Speed range: 8 000 min⁻¹ Table dimensions: 1000 × 560 mm Number of tools in the magazine: 30 Pl.

Condition: good (used), functionality: fully functional, Year of construction: 2015, operating hours: 4,900 h, load capacity: 8,000 kg, lifting height: 5,250 mm, free lift: 150 mm, load center: 900 mm, fuel type: diesel, mast type: simplex, construction height: 3,900 mm, Load capacity 8000 kg Lsp900 Linde H 80 Diesel Mast type: Standard clear view Year of manufacture 2015 Operating hours 4900 Lift height approx. 5250 mm Closed height approx. 3900 mm 3rd + 4th valve - double auxiliary hydraulics Sideshift + fork positioner Forks 200 cm Full cabin with heating Gross €61,761 Net €51,900 Looking for another forklift or high-lift truck? LPG, electric, diesel? Ksdowu H I Ropfx Apdjdn Contact us and we will find the right vehicle for you. Subject to error and prior sale. Sale only to commercial buyers without warranty.

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 533143283, travel distance X-axis: 2,000 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 750 mm, controller manufacturer: MAZATROL, workpiece height (max.): 750 mm, workpiece weight (max.): 3,000 kg, table width: 800 mm, table length: 2,240 mm, overall weight: 14,000 kg, Mazak MTV-815/80 • Table size: 2,240 mm × 810 mm • Maximum table/workpiece load: 3,000 kg evenly distributed • Maximum spindle speed: 40 - 6,000 rpm • Spindle taper: SK 50 • Spindle power/torque (standard): e.g. 18.5 kW and 759 N·m at 40% duty cycle / 30 min rating; for high-power version: 26 kW and 1,067 N·m. Kjdpjx E Twasfx Apdjdn All information provided without guarantee

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 500 mm, controller manufacturer: FANUC, controller model: FANUC Oi-MD, table width: 420 mm, table length: 900 mm, number of spindles: 2, number of slots in tool magazine: 20, tool diameter: 40 mm, number of axes: 4, Equipment: documentation/manual, 4th axis: rotary table included; Kodpfxjygg Itj Apdodn

Condition: used, Year of construction: 2005, functionality: fully functional, For sale is a complete shrink sleeve system consisting of an Etisleeve sleeve applicator and a multi-zone steam shrink tunnel Powersteam, both from the renowned manufacturer Sleever International. The system was in productive use until recently and efficiently processes shrink sleeves with high precision onto cylindrical containers. Machine Configuration: Sleeve Applicator Manufacturer: Sleever International Model: Etisleeve Type: 75 SL 2V 80 Year of manufacture: 2005 CE-compliant Steam Shrink Tunnel Manufacturer: Sleever International Model: Powersteam Type: MSA 250 Year of manufacture: 2005 Control & Operation – Integrated HMI control panel – Digital input of sleeve length – Performance display (products/min) – Cycle and process control – Safety monitoring (housing supervision, reset function) – Production and daily counters Technical Features: – Precise vertical sleeve application – Automatic sleeve film unwind – Centering station for precise positioning – Multi-zone steam shrink tunnel with stainless steel interior – Continuous stainless steel conveyor belt – Auger feed with interchangeable augers – Height- and format-adjustable guide rails – Full safety glazing with interlock system – Industrial-grade drives and robust mechanical components Formats & Performance: – Proven operation with 100 ml containers – Documented sleeve lengths (e.g., 155 mm) – Additional formats possible depending on configuration – Output depending on product approx. 40–80 containers/minute Kdodpfx Aox Tg Ubjpdon Condition: – Used – Complete and fully functional system Scope of Delivery: – Etisleeve sleeve applicator – Powersteam steam shrink tunnel – Integrated conveyor technology – Feed screws and visible format parts – Existing adjustment and format documentation The system is currently still fully assembled and available for inspection under production conditions. A live demonstration with product and sleeve film under power is possible by prior appointment. Location: – Berlin – Inspection possible Price: – On request

Condition: new, Edge sanding machine Bernardo HV 80 OSZI work table: 850 x 300 mmTable height adjustment: 90 mmBelt length: 2510 mmBelt width: 150 mmSanding belt rear wall: 950 x 200 mmSanding unit lockable: 90° / 0°Belt speed: 16 m/sec.Additional table: 300 x 250 mmSuction connection: Ø100 mmRoller diameter: 110 mmMotor output power: S1 1005 kW (2.0 PS)Motor input power: S6 401 kW (2.8 PS)Voltage: 400 VMachine dimensions (W x D x H)1400 x 680 x 1220 mmWeight approx. 148 kg Kdodpfx Aod Tb U Sjpdsn

Condition: used, Year of construction: 1970, turning diameter over bed 840 mm turning diameter over slide rest 640 mm turning length 3300 mm spindle bore 74 mm turning speeds 7,1-1400 U/min 3-jaw chuck 315 mm turning dia. in gap 920 mm length of gap 370 mm total power requirement 22 kW weight of the machine ca. 10 t dimensions of the machine ca. 8x2x1,8 m Multifix steel holder with inserts The tech. Data are manufacturer or operator information and therefore non- Ksdpfx Aeyqvwrepdsdn binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Year of construction: 1986, condition: used, pressure 40 t dayligth 250 mm Ksdpfx Aecb T Twopdodn stroke 8 - 50 mm table clamping surface LxW 620 x 450 mm table height over floor 980 mm no. of strokes 85 - 500 Hub/min distance between columns 680 mm ram - range of adjustment 50 mm number of T-slots 4 ram surface mm total power requirement 8 kW dimensions of the machine ca. 2,3 x 2,2 x 2,8 m weight of the machine ca. 5,8 t - Unidor Tool monitoring - Kaiser gripper feed, band width 180 mm, feed length 150 mm - Kaiser scrap shear on the left side - soundproof cladding

Condition: used, Year of construction: 1998, pressure 80 t throat 335 mm stroke 8 - 100 mm no. of strokes 60/90 Hub/min Kedpfx Aouild Aspdjdn table surface area 900 x 670 mm hole in the table 280 x 200 mm dayligth max. 450 mm ram adjustment 80 mm ram surface 700 x 450 mm tool dimension, max 700 x 450 mm weight of tools max. 140 kg total power requirement 11,07 kW weight of the machine ca. 6,5 t dimensions of the machine ca. BxLxH 1,72 x 2,0 x 2,82 m

Condition: new, Year of construction: 2026, Machine Type: EVT 80 Manufacturer: ERBA Power kW: 0.75 Total volume: 80 L Description: The EVT 80 long-tank vibratory finishing machine from ERBA is equipped with a durable, hot-cast polyurethane lining. Emptying and separation are carried out via bottom discharge (manual/pneumatic). Removable dividers allow the process tank to be partitioned into compartments for individual processing of parts. The machine is fitted with an electrical control cabinet and can be optionally equipped with a fully automatic PLC process control system. For higher loads, reinforced suspension and a strengthened motor can be installed upon request. The motor speed can be continuously adjusted by means of a frequency inverter (optional). As an experienced partner, we provide expert knowledge in the field of vibratory finishing. Together with you, we develop efficient solutions for optimal process results. The price indicated is net, plus the applicable statutory VAT and shipping costs. Accessories shown in the images may be optional and subject to an additional charge. The price quoted refers to the basic machine. The photos are sample images—the actual appearance and size may differ from those pictured. If you are interested, we look forward to your inquiry. We will be happy to advise you without obligation. Kdjdpfx Apeyq Rblsdjn The European Commission provides a platform for online dispute resolution (ODR). This listing is for presentation purposes only. The contract negotiation is conducted via telecommunication (email, phone, messaging platform). In the first step, we will send you a non-binding offer, along with our general terms and conditions, legal notice, and revocation instructions before any sale or contract conclusion takes place.

Condition: ready for operation (used), A profile hardening system (inductor) AEG-Elotherm Elomat V/N/180/3 is available. The nominal output is 200kW. The system is fully functional and is offered including various coils. Kodpsttv Trsfx Apdedn

Condition: used, mileage: 1 km, power: 1 kW (1.36 HP), axle configuration: 4x2, gearing type: automatic, Year of construction: 2009, GVW: 1.500 kg Kdedpfxjx R Txzs Apdon Please contact Emal Jaweed for more information

Condition: used, first registration: 08/1998, total length: 16,000 mm, total width: 2,550 mm, Year of construction: 1998, GOLDHOFER STZ-TL 3-33/80 3-axle low-bed (gooseneck) semi low-loader with 3 steering axles, with lowerable platform and hydraulic ramps TRAILER HAS BEEN SANDBLASTED AND PAINTED!! • ABS • 3 x BPW ECO-Plus air suspension axles • 3 x steering axles • lifting/lowering system • hydraulic, 2-part access ramps • hydraulically lowerable platform • extendable to 3 m width • warning signs • NATO connector for the electric/hydraulic pump • overall length: 16,000 mm • empty weight: 15,900 kg • GVW: 48,000 kg (technically possible: 48,000 kg) • payload: 32,100 kg Kdodpfx Ajwpknwepden • 4 x axle load gauges • twin tires: 235/75 R17.5 - TÜV / inspection and SP: !! new !! - German vehicle! Subject to errors and prior sale!

Condition: refurbished (used), DKV III Throughfeed Press with Brake Unit Refurbished Available either with original hydraulic motors or converted to servo motors Options: - Chain threading device - Traveling cross-cut saw Function: For pressing finger joints without stops (in continuous operation). The upper and lower plate chains provide feed force. Following brake plates transfer the required longitudinal press force to the wood via friction. Kodpfsv T Aqysx Apdsdn Advantages: - High output despite relatively slow feed rates - Absolutely no vertical finger offset at the joints Technology: Heavy-duty 2" plate chain, pneumatically lift/lowerable Floating brake elements Pressing force measurement via contact manometer Height adjustment electric Maximum pressing force adjustable and dependent on feed speed and wood cross-section, 4500 daN at 32 m/min 2200 daN at 70 m/min Feed speed adjustable 10-70 m/min Drive power Feed unit adjustment 1 kW Brake adjustment 1 kW Hydraulic motors 45 kW Technical data: Wood width 90 - 180 mm Wood thickness 20 - 80 mm Thickness-width ratio 6:10 Wood cross-section for 15/16.5 mm fingers max. 90 cm²

Condition: as good as new (ex-display), Year of construction: 2025, One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces, end trimming station with VR function , HF-top and bottom milling unit, chain feed, double roller top pressure and extendable work piece support. For ABS and PVC roll material as well as fixed lengths from 0.4 – 2.0 mm and of 8 – 50 mm work piece thickness. • Speed: 5,5 m/min. • 2 spaces for finishing unit • 5,6“ Colour Touch screen →Automatic edge feeding for roller material over turntable D = 600 mm →Two reverse, operating-controlled pre-milling units with diamond charged helical joining millers provide a neat and tear-free premilling of the work pieces before the gluing of the edge material Kodpfeip Uzpox Apdjdn →Glue application directly to workpieces: Teflon-coated glue pot with a capacity of 1,5 kg, leak-proof with glue supply from below (excess glue automatically flows back into the glue pot). Glue roller allows exact dosage of glue. Electronic temperature control with automatic stand-by function (reduces probability that the glue burns if the machine is not used for a longer period and is still turned on) →Pneumatically operated cut-off knife from roll material up to 2 mm edge thickness →Pressure unit consisting of one driven pressure roller synchronized with glue spreading roller and one adjustable pressure roller with spring tension for a nearly invisible joint of the edge material with the work piece →End trimming station for front-and back egde with HF-Motor 0,27 KW /12000 U/min ,milling head with interchangeable knives and VR Function for vertical rounding . Automatic setting from workpiece, with dust collector system →High-frequency top and buttom milling station, 2 powerful 0.27 kW high-frequency motors with HM-WPL special millers; suitable for radius and bevel milling, horizontal and vertical scanning of the work piece; aggregate adjustment equipped with digital readouts for setting to various edge types; 2 extraction hoods, height adjustment of the upper aggregate with the top roll pressure →OMRON 5,6“ colour touchscreen controls glue temperature settings, automatic temperature reduction for stand-by function of the machine, switching on and off of aggregates and error diagnosis Additional finish aggregates (1 free space): →Glue scraper unit : Removes eventual glue rests with a slight draw cut from the glue joint of the work piece surface →Buffing unit : 2 motors 0,09 kW, 1,500 rpm provide a super-finish for ABS and PVC edge material 67641340ec347

Condition: used, Year of construction: 2006, IMA Novimat edge banding machine: Manufacturer: IMA Type: Novimat Concept/I/G/80/650/R3 Year of construction: 2006 Machine no.: 08113 Rated power: 41 kW Workpiece feed: Sliding chain Stop fence: Adjustable stop fence 700.080 Slide-in table: 63.152 Milling unit: 08.378 Glue level monitoring: Available Glue application unit: 04.0832 Gluing unit: 04.1570 PU premelter: 283.203 HK tool holder: For high-speed motors Snipping unit: 08.42 Trimming unit: 08.0555 Multiple processing unit: 08.348 Multiple profile scraper unit: 08.516 Flat scraper: 08.517 Copy corner buffing unit: 08.604 Buffing unit: 08.617-4 Safety devices: Light barriers, temperature controller, control terminal Additional equipment: Roller conveyor table in front Total machine length: Approx. 11 /16 m Suction device: Included Accessories: Edge magazines: 2 sliding magazines for gluing edges, each for 12 rolls, mobile Plasma edge heating (PLASMATREAT Düstec): 2 plasma devices Switch cabinet Kdedpfx Apornkw Dsdon Panel return system (manufacturer: VENJAKOB): Components: 7 belt conveyor tables, belt width approx. 100 cm, different table lengths Round belt conveyor table Switch cabinet system 2 angular transfer tables Peripheral stations for edge processing line: Consisting of: Interface system Barcode scanning system

Condition: new, Extraction capacity of filter unit at spigot*: 980 m³/h Total power consumption*: 0.71 kW Operating voltage: 400 V, 50/60 Hz,3Ph+PE Noise level*: 68 db(A) Dimensions L/W/H in mm: L 1290 / W 345 /H 595 Colour: RAL 7035 Weight: 79 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter equipment Special voltage or special colour on request Application: Separation of emulsion mist, for medium to very large machine workrooms. Your advantages of the COBARON series: - 15 unit variants available - Direct from the manufacturer - ISI-TRONIC as standard (digitalised filter control) - Electronically controlled EC fan as standard - Adjustable speed and air flow rate - Available with a wide range of filters - High-quality filter media in the pre-filter and main filter area - Separation rates of up to 99.95 - Large range of mounting and connection accessories Ksdeh Rfbqopfx Apdsdn - Flexibly adaptable to the application - Optimum service life - Quality Made in Germany With COBARON, we offer a filter system that meets today's diverse processing possibilities and the resulting pollutant profiles. In the standard programme alone, the COBARON combination filter system offers various filter equipment variants and can thus be variably configured for many applications. The various configuration levels of the COBARON series were specially developed for applications that were borderline cases for many filter systems (mechanical or electrostatic). The combination of both proven filter principles in the appropriate application increases the effectiveness of the air filter and extends the service life. COBARON can be operated as a purely mechanical filter unit with different filter stages - or additionally configured with an electrostatic filter cell. Our filter units are already digitalised as standard and can be controlled with a laptop, for example.

Condition: good (used), Pneumatic filling machine with filling bend Function The machines work according to the piston principle of suction - discharge. One or two dosing pistons are driven by pneumatic cylinders. The desired filling quantity is set using a handwheel on a scale on the machine. Kdodert Un Ejpfx Apdsn ■ Pneumatic volumetric piston dispenser Filling capacity 300-800 pieces/h ■ Dosing accuracy +-0.5% ■ Immediately ready for operation, easy handling ■ Easy to clean ■ Filling range 8 - 80 ml / interchangeable cylinder Self-priming ■ Easy to transport for different locations Areas of application: Production and laboratory Chemical industry - cosmetics industry Food and pharmaceutical industry Paint and varnish industry Type: H 80-P-MV Filling range 8 - 80 ml Filling times: 300 - 800 h Further articles in other sizes - new and used - can be found in our store! International shipping costs on request!

Condition: good (used), Year of construction: 2012, DEMAG crane chain hoist DCM-Pro 2 80 1/1 H2.8 V16/4 80 kg with crane canopy (2x3m) The DCM-Pro manulift was developed for safe and fast load handling with one-hand operation. The DCM-Pro is based on the lifting unit of the DC-Pro chain hoist and the DSM-C control unit. Due to the control unit being rigidly connected to the load handling attachment, the operator only needs one hand to operate the chain hoist as well as to guide the load. Manufacturer: DEMAG Type: Crane chain hoist Kdedpfjhwd E Nex Apdon Model: DCM-Pro 2 80 1/1 H2.8 V16/4 Load capacity: 80 kg Control: GSA Type 4 Movement radius: sideways 3 metres and forwards/backwards 2 metres Steel beam: included in the offer Condition: used  Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: excellent (used), first registration: 04/2008, total length: 10,800 mm, total width: 2,550 mm, color: grey, Year of construction: 2008, Equipment: ABS, = Additional options and accessories = - Air suspension = Notes = Iveco Eurocargo tractor own weight: 3,955 kg, total weight: 7,490 kg with Heinemann 2-axle low-loader trailer, own weight: 3,500 kg, total weight: 14,500 kg. Euro 5 engine. Only 107,907 km. German registration. Valid inspection until 06/2025. = Further information = Kdedpfswzkdiex Apdon General information Mileage: 107,907 km Cabin: Day cab Technical information Power: 162 kW (220 hp) Fuel type: Diesel Transmission: 6-speed, manual gearbox Weights Unladen weight: 3,500 kg Payload: 11,000 kg Gross vehicle weight: 14,500 kg Environment Emission class: Euro 5 Condition Technical condition: very good Visual condition: very good Further information Please contact Gerrit Haverhoek for more information.

Condition: ready for operation (used), Year of construction: 1999, operating hours: 2,466 h, functionality: fully functional, machine/vehicle number: 13147, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, table width: 560 mm, table length: 1,000 mm, TECHNICAL DETAILS Travel X-axis: 800 mm Y-axis: 600 mm Z-axis: 500 mm Spindle Speed range: 20 – 12,000 rpm Tool holder: SK40 Table Dimensions: 1,000 x 560 mm Tool magazine: 30 positions Kedpfx Ajw Nqh Aspdedn MACHINE DETAILS Weight: 7,000 kg Spindle hours: 2,466 h Machine operating hours: 34,485 h Power: 15 kW (at 40% duty cycle) Frequency: 50 Hz Operating voltage: 400 V Control voltage: 24 V Total rated current: 44 A EQUIPMENT Chip tray Heidenhain TNC430 control Heidenhain touch probe system Extraction unit Electronic handwheel

Condition: used, This Listing is for a refurbished Laboklav 80 MV Autoclave Incl. commissioning in UK. (outside the UK is possible also, please request and we will try and accomodate) Vertical device, 80l, can be changed to horizontal version (stand required) Sterilisation temp. 98-135°C Outer dimensions (w x h x d in mm) 740 x 915 x 600 chamber dimensions (Ø x d in mm) 410 x 610 Kjdpfxsxx Aqaj Apdodn Steam generator 6,6kW Vacuum incl. pre- and postvacuum, heating during postvacuum Fast re-cooling with double jacket 3N 400V, 50 HZ, 16A, CEE plug Refurbished according to manufacturer's specifications: Reconditioning of pressure vessel incl. pressure test, maintenance incl. spare parts (filter, valves, seal, etc.) According to requirements: Update of cable tree, steam generator, control system and software to the current status. Test runs to ensure and check functionality

Condition: used, This listing is for a Elmo Rietschle VTA 80 Rotary Vane Pump. The unit is in full working condition and is ready for immediate release. Discover the power and efficiency of the Elmo Rietschle VTA 80 Rotary Vane Pump, engineered to meet the demanding needs of various industrial applications. This high-performance pump is designed for reliability, low noise operation, and easy maintenance, making it an ideal choice for laboratories, manufacturing, and process industries. Key Features: High Efficiency: The VTA 80 delivers an impressive volume flow rate of 55 to 92 m³/hr (32.3 to 54.1 cfm), ensuring optimal performance for your vacuum needs. Ultimate Vacuum: Achieve a robust ultimate vacuum of 150 mbar (abs), allowing for effective handling of a wide range of applications. Dual-Sided Bearings: The pump features bearings on both sides of the rotor, enhancing stability and longevity during operation. Low Noise Level: Designed for quiet operation, the VTA 80 minimizes sound levels while maintaining high performance. Sound Cover Design: The innovative sound cover allows for ducted cooling air outlets from one or both sides, optimizing airflow and cooling efficiency. Kdedpfx Aoxx Ag Ujpdon Benefits: Easy Servicing and Operation: The VTA 80 is designed for straightforward maintenance, reducing downtime and ensuring consistent operation. Versatile Applications: Suitable for various applications, from laboratory vacuum processes to industrial manufacturing, this pump adapts to your specific requirements. Reliability and Durability: Built with high-quality materials and engineering, the VTA 80 ensures long-lasting performance and reliability in demanding environments. Elevate your operations with the Elmo Rietschle VTA 80 Rotary Vane Pump, where efficiency meets durability. Experience enhanced productivity and reliability in your vacuum applications today!