Used Lathe , Lathe Ca6140 for sale (5,373)

Condition: used, turning diameter over bed / mm turning diameter over slide rest / mm turning length / mm Conventional lathe with copying attachment and extensive accessories Turning diameter over cross slide: 240 mm Spindle bore: 52 mm Turning diameter: 360 mm Center height: 180 mm Turning length: 1,000 mm Overall length: 2,200 mm Overall width: 750 mm Overall height: 1,400 mm Maximum spindle speed: 1,750 rpm Min. spindle speed: 60 rpm Total weight: 1,800 kg Lhjdpfsv Rgzwsx Ahtok All technical specifications are subject to change without notice. Deviations may occur depending on the year of manufacture, model, or condition of the machine. We assume no liability for the accuracy or completeness of this information.

Condition: used, Year of construction: 1969, turning diameter over bed 500-600 mm turning length 2800 mm Lhedpfx Ahovdx I Astek bore diameter 130 mm weight of the machine ca. 5,25 t required space / m

Condition: used, Year of construction: 2011, turning length 1500 mm control SINUMERIK 828D centre height 270 mm greates pass round over bed 540 mm swing diameter over slide rest 310 mm bed width 350 mm max. workpiece weight 1500 kg spindle bore 85 mm turning speeds 27 - 2250 U/min main drive DC 11 kW MACHINE EQUIPMENT: - AME chip conveyor - Lynette - Heavy grey cast iron bed for optimum damping and reduced tool wear - Inductively hardened and parallel synchronised bed guides - Counter guides completely Turcite-coated and hand-scraped - Hardened and ground ball screws - Thermosymmetrical headstock Lhjdpfoxyaf Rsx Ahtsk - Main drive 11 kW - Infinitely variable speed range 27-2250 rpm with 3-stage gearbox

Year of construction: 1961, condition: used, centre height 235 mm turning diameter 470 mm turning speeds 2700 U/min turning length 1500 mm Lhsdpfxjl Ab Hte Ahtsk inkl. Zubehör (siehe Bilder)

Condition: used, Year of construction: 1972, turning diameter over bed 1650 mm turning diameter over slide rest 1350 mm turning length 10000 mm turning speeds 1,4 - 280 U/min greates pass round over bed 1580 mm center height over square guideway 825 mm bed length 13.350 mm bed width 1.120 mm spindle diameter in front bearing 260 mm spindle bore 82 mm upper head travel 500mm tailstock quill diameter 200 mm max. workpiece weight between centres 10.000 kg weight of the machine ca. 25,5 t Ledpfjy S Duvex Ahtohk Power 45 KW The machine is a first-hand purchase, is free from defects and is in very good condition. In 2023, the headstock was overhauled; this included replacing the main spindle bearings, chrome plating and reworking the main spindle and bottom wheel (bearing seat). The guideways are also in very good condition, considering their age. Accessories - Feed guard Equipment - 3-axis digital display - 1 x faceplate - 1 x roller stand - Chip conveyor (Kabel Schlepp 300/100)

Year of construction: 1980, condition: used, turning diameter over bed 655 mm Lsdpfxolc Uk Ij Ahtohk turning diameter over slide rest 390 mm turning length 1250 mm spindle bore 82 mm spindle turning speed range 9-1120 U/min feeds 0,049-3 mm/U total power requirement 12 kW weight of the machine ca. 5,2 t required space 3,5 x 1,9 x 1,7 m m

Condition: excellent (used), Year of construction: 2004, turning length / mm turning diameter over bed / mm turning diameter over slide / mm control / Universal lathe VDF Boehringer DUS 1000 ti OPTIONAL EQUIPMENT SURCHARGE: C-AXIS MILLING TOOL Machine no. 2042.6616-05 Year of construction 2004 Turning length approx. 2200 mm Swing diameter over bed 1,000 mm Swing diameter over bed 1,000 mm Centre height over flat track 500 mm Bed width 560 mm Bed slide guide length 800 mm Spindle diameter front bearing 170 mm Spindle bore 128 mm Infinitely variable three-phase motor (AC motor) Drive power 37 kW Torque max. 4,069 Nm Total speed range 6.4 - 1,600 Gear stages 2 Heidenhain control Manualplus 4110, completely renewed approx. 1 to 2 years ago renewed 2 lynchets Equipped with roto power chuck, diameter approx. 500 mm. Lhedpeud In Hofx Ahtsk Including many accessories of clamping jaws, estimated 15 sets, as well as approx. 15 sets of Multifix basic holders, size D. Machine was equipped with a separate milling device, with its own control, value approx. 20.000,00 €. OPTIONAL EQUIPMENT SURCHARGE: C-AXIS MILLING TOOL Only operated by the owner, very good condition!

Condition: used, Year of construction: 1973, turning diameter over bed 2235 mm turning diameter over slide rest 2997 mm turning length 12200 mm Control SIEMENS faceplate diameter 2000 mm Lsdpfxet Ei Huj Ahtohk required space ca. 7 x 22 m weight of the machine ca. 220 t HOESCH MFD CNC HEAVY DUTY LATHE WITH SIEMENS CONTROL Type: D2000 SGK-1 Technical documentation is included Technical Specifications Space requirement: 7 x 22 metres + control cabinet 4.7 x 0.5 x 2 metres Faceplate 2006mm Centre Height 1,499mm Swing Over Saddle 2235mm Swing Over Bed 2997mm Turning Length 12192mm Min/Max Workpiece Held In Chuck Ø457/1600mm Maximum Workpiece Weight 110 Ton Speed Range 0.5- 140rpm (300hp Motor) Feed Range 0.0118-7.08''/Rev. Steady Capacity Ø356-902mm Copying Depth 508mm lnductive Maximum Cutting Force 30,000Nm Twin Barrel Steady Capacity Ø356- 902mm, 50 Ton Capacity, Roller Type. Machine Data 1.1 Total Machine Max. Swing over bed slide 2,000 mm Center height over bed 1,500 mm Distance between centers 12,000 mm max. weight of workpiece 100,000 kp height measured from shop floor level up to machine axis 2,200 mm 1.2 Headstock Diameter of main spindle 670 mm Diameter of faceplate 2,000 mm Max. chucking diameter 1,600 mm Min. chucking diameter 455 mm Dead Center Angle 80 ° Faceplate Speed: Constant torque 1st range 0,5 – 2,6 2nd range 1,25 – 7,2 3rd range 3,1 - 18 4th range 7,8 - 45 Constant capacity 1st range 9,0 2nd range 22,6 3rd range 56 4th range 140 Capacity of Main Drive 220 HP Max. Torque faceplate 30,000 kpm Key Speed 5,7 rev/min 1.3 Saddle Max. admissible main cutting force 30,000 kp Feed Speed longitudinal 0,3 – 120 mm / min Feed Speed transverse 0,3 – 120 mm / min Rapid Traverse Speed longitudinal 2,000 mm/ min Rapid Traverse Speed transverse 1,000 mm/ min Max. copying depth 500 mm Max. length of tool carrier measured from front edge cross slide to front edge tool carrier 700mm Tool carrier – width 60mm 35 mm Cutting Edge height of tool units 60 mm Cutting edge height of shank-type tools beeing located on the clamping table 100 mm Travel of upper tool post 820 mm 1.4 Tailstock Tailstock barrel diameter 580 mm Adjustment of the barrel 150 mm Dead Center angle 80 ° Speed of rapid traverse 2,000 mm / min Positioning speed 500 mm / min 1.5 Steady Clamping range 350 – 900 mm ...

Condition: used, Year of construction: 1953, turning length / mm turning diameter over plate // mm faceplate diameter / mm Plane disc diameter: approx. 3600mm Centre height above plate: approx. 1500mm Turning diameter over plate: 2600mm Turning diameter in the pit: 3600mm Turning diameter over bed: 1300mm Turning length: approx. 2400mm Max. Workpiece weight: 22000kg Max. Torque on the faceplate: 5000 mkg Faceplate gear rim pitch circle diameter: 1900mm Main spindle bore: 120mm Lhedpfoua Iw Tox Ahtjk Speed range normal: 0.71-35.5 rpm increased: 1-50 rpm increased: 1.4-71 rpm Total power: 38kW Total weight: approx. 42.5 tonnes

Condition: used, Year of construction: 1972, turning length / mm turning speeds / U/min centre height / mm Lhsdpfszcgi Nox Ahtek LÖW Universal Lathe V 1000 Details of Model V 1000 Machine no. HO 1026 Centre height over flat track 500 mm Swing diameter over bed 1,000 mm Bed length 6,200 mm Turning length 4,000 mm Spindle bore 104 mm Face disc diameter 900 mm Max. workpiece weight between centres 5,000 kg max. workpiece weight with 1 vice 6,000 kg max. workpiece weight with 2 setting vices 7,100 kg incl. documentation

Condition: used, Year of construction: 1988, turning diameter over bed 2000 mm turning diameter over slide rest / mm turning length / mm - Type 1 K 671 320 F3 - Year of manufacture 1988 (first commissioned in 1998) - Turning length 10,000 mm - Turning diameter over bed 2,000 mm (modified) - Faceplate diameter 1,950 mm - Faceplate clamping range 400 - 1,350 mm - Speeds 1.00 - 140 rpm - Torque 125,000 Nm - Main cutting force 130 kN max. - Automatic swiveling tailstock - Max. workpiece weight 70 tonnes - Max. workpiece weight with steady rest 100 tonnes - Drive power 100 kW - Number of bed ways 4 - Dimensions 22,000 x 6,200 x 2,900 mm - CNC control SIEMENS 840D (2010 for €220,000.00) - Support feed X-Z 0.3 - 4,000 mm/min. - Support rapid traverse X-Z 4,000 mm/min. Lhodpsxn Tz Iefx Ahtek - Inner cone dimensions 140 x 1:7 - The machine complies with CE guidelines - Includes 2 steady rests, 1 roller block, 4 jaws, boring device - Condition: very good condition

Condition: used, Year of construction: 2000, faceplate diameter 3200 mm swing diameter 3500 mm turning height 2200 mm range L-W-H 7730 x 6240 x 6700 mm control Typ 840 D sl voltage 3 x 400 V frequency 50 Hz turning speeds 0,8 - 40 U/min max. turning diameter 3500 mm total power requirement 51 kW weight of the machine ca. 86 t Technical specifications Machine type: CNC vertical lathe Manufacturer: Rafamet Year of manufacture: 1973 conventional General overhaul with control retrofit 2010 Control upgrade 2016 Control: Siemens 840 D Sl Condition: very good faceplate Turning diameter of the faceplate 3,200 mm Number of rotation stages of the face plate 3 (infinitely variable) Speed ??ranges of the faceplate 0.8 - 40 rpm Level I 0.8 – 3 rpm Level II 0.8 - 11 rpm Level III 0.8 – 40 rpm processing of workpieces Max. turning diameter 3,500 mm Max. turning height of the workpieces above the faceplate 2,200 mm vertical supports Smallest axis distance between the vertical supports 470 mm Largest ram travel of the left vertical support 985 mm Largest ram travel of the right vertical support 985 mm Axis Feeds - Infinitely variable feed Max.: X1.2 3m/min max.: z1.2 2.5 m/min Plunger cannot be pivoted Support — crossbar Rapid feed of the cross beam 600 mm/min Larger distance of the cross beam to the faceplate 2,300 mm load sizes +Permissible turning force when turning workpieces with a turning diameter of 2,000 mm and a turning speed of 20 m/min. 8,000kg +Largest chip cross-section for workpieces made of steel Fz = 50 kg/mm² at a turning speed of 20 m/min for all supports 45 mm² +Largest chip cross-section for workpieces made of steel Fz = 50 kg/mm² at a rotation speed of 20 m/min for a vertical support with max. plunger length 985 mm 2.5 mm² +Largest chip cross-section for cast iron workpieces HB = 160 kg/mm² at a turning speed of 20 m/min for all supports 120 mm² +Largest chip cross-section for cast iron workpieces HB = 160 kg/mm² at a rotation speed of 20 m/min for a vertical support with max. plunger length 985 mm 22.5 mm² +Largest permitted workpiece weight at 0.8 - 3.15 rpm 17,500 kg +Largest permitted workpiece weight at 4 - 40 rpm 7,500 kg electric motors Main drive motor power and revolutions 51 kW Power of the feed motors of: - Vertical support beam (2 pieces) 16 Nm (gear 1:10) - Tappet (2 pieces) 16 Nm (gear 1:12) Power and revolutions of the drive motor of the hydraulic pumps (2 pieces) 3kW - 1,500 rpm Power and revolutions of the clamp hydraulic motor of the vertical support beam 1.5 kW - 1,500 rpm Power and rotation for crossbar adjustment 15 kW - 1500 rpm 3.5 Information on the compressed air supply and other consumables Lhsdpfxjuddcge Ahtsk Compressed air connection: 6 bar free of oil and water 3.6 Energy Consumption Conditions Voltage: 3 x 400V Control Voltage: 24V Frequency: 50Hz Fusing: 315 A Main dimensions and weight of the machine Length 7,730mm Width 6,240mm Height: 6,700mm Weight: 85,750 kg Tool: Capto 60 recording Not powered front panel Turning diameter of the front plate 3,200 mm Clamping disc diameter 3,400 mm Number of rotation levels of the front panel 3 (continuously adjustable) Front panel speed ranges 0.8 - 40 rpm Level I 0.8 - 3 rpm Level II 0.8 - 11 rpm Level III 0.8 - 40 rpm processing of workpieces Max. turning diameter 3,500 mm Max. turning height of the workpieces above ...

Condition: used, Year of construction: 1980, turning diameter 7000 mm faceplate diameter 3500 mm workpiece height 3000 mm 160 mm 1998 Control Siemens 840 C max. table load 60000 kg electr. connected load 400 V Serial number 11 33 0051 total power requirement 71 kW weight of the machine ca. / t required space 13 x 6 m The SCHIESS-FRORIEP 40 DV is a vertical lathe built in 1980. The machine was modernized and improved in 1998. Among other things, a driven tool system (C-axis) was installed. In addition, the control system was modernized to SIEMENS 840 C. The large open-sided vertical boring mills with travelling column - type DV - are particularly suited to situations where likely workpieces frequently change Ljdpfx Asuddlzjhtjhk in diameter but where maximum workpiece dimensions are rare. Decisions in favour of this type of machine are generally due to minimum floor space requirement, universal adaptability and economical advantages. The modern design of these machines is characterized by rigid all-steel construction optimized by computer - SCHIESS can claim to have done much valuable pioneering work in this area of heavy-duty machine tool building.

Condition: excellent (used), Year of construction: 1989, turning length / mm turning diameter over bed / mm turning diameter over slide / mm control / WOHLENBERG PT1-1070II Heavy-duty lathe Very good condition heavy duty lathe, make Wohlenberg. The machine was partially overhauled in 2013! Type PT1-1070II Year of manufacture 1989 partially overhauled in 2013 Country of origin Germany CNC control Siemens 840 D extended from 7 m to 11 m turning length Ljdpfx Aoud Ipkohtohk Santer turret geometry Turning diameter over bed 1,070 mm Turning diameter over support 710 mm Turning length 11,000 mm Bed width 710 mm 2 gear stages Speed 3.55 - 710 rpm Quill diameter 200 mm Quill stroke 350 mm Spindle clearance 128 mm Chip conveyor Boring tower incl. boring bar Length approx. Ø 200 x 2,430 mm Face plate 1,000 mm Steady rest 4 quills 500 mm open Main drive motor 71 kW incl. documentation

Condition: used, Year of construction: 1962, faceplate diameter 2250 mm swing diameter 4500 mm turning height 2000 mm turning diameter 3150 mm workpiece weight max. 25000 kg total power requirement 55 kW Lhjdpfxsuc Alds Ahtsk weight of the machine ca. ca. 32 t required space / m

Condition: used, turning diameter over bed 2400 mm turning diameter over slide rest 2200 mm turning length 10000 mm power capacity 185 kW faceplate diameter 1650 mm turning speeds 1,5 -150 U/min max. workpiece weight 70000 kg clamping diameter 1400 mm Technical data Working range Maximum turning diameter over support: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in the headstock faceplate: 300 - 1,600 mm with special jaws up to 2,050 mm Clamping diameter in the tailstock faceplate: 300 - 1,400 mm Lodpfx Asxddvnshtohk Maximum workpiece weight: 70000 kg Main drive, faceplate Faceplate diameter: 2000 mm Faceplate speeds, continuously adjustable in 4 stages: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Drive power of main motor: 185 kW Flange centre point angle: 70° Supports Travel of the plunge slide: 500 mm Travel of the face slide: 1400 mm Quick adjustment, longitudinal: 2000 mm/min Quick adjustment, face: 800 mm/min Infinitely variable feed, longitudinal: 0.6 - 300 mm/min Infinitely variable feed, face: 0.3 - 120 mm/min Max. cutting force at support: 20,000 kg Tailstock Faceplate diameter (removable): 1650 mm Faceplate clamping diameter: 1400 mm Flange centre point angle: 70° Quick adjustment: 1250 mm/min Special equipment Copying device for first support Copying length 8500 mm Max. copying depth in one pass 500 mm Boring device: Boring bar 460 x 390 mm Drilling diameter 600 - 1000 mm Maximum drilling depth in one pass 2700 mm At Ks of 200 kp/mm² - s max. = 1.5 mm/rev a = max. chip cross-section 30 mm² at a projection of 1000 mm Reduced chip cross-section with increasing drilling depth A guide ruler for cone turning, adjustment angle up to 8° and a maximum cone length (in one pass) of 2000 mm, adjustment accuracy ± 5 minutes. A guide ruler for cone turning, adjustment angle up to 15° and a maximum cone length (in one pass) of 1000 mm, adjustment accuracy ± 5 minutes. 125 kg auxiliary crane on spindle box.

Condition: used, Year of construction: 2007, turning length 1500 mm control FAGOR 8055i/A TC centre height 230 mm greates pass round over bed 475 mm swing diameter over slide rest 240 mm Ljdpjv Hhv Usfx Ahtehk bed width 355 mm max. workpiece weight 1500 kg spindle bore 65 mm spindle turning speed range 100-4500 U/min weight of the machine ca. 3,15 t required space 3,51 x 1,80 x 2,02 m

Condition: used, turning diameter over slide rest 800 mm Ljdpfxjv H Etde Ahtshk Control Siemens 802D swing diameter 2000 mm centre height 1000 mm

Condition: good (used), Year of construction: 1988, functionality: fully functional, machine/vehicle number: 1105, spindle bore: 48 mm, center height: 170 mm, total length: 1,800 mm, total width: 900 mm, total height: 1,600 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 22 rpm, overall weight: 1,500 kg, input voltage: 380 V, input frequency: 50 Hz, WEILER CONDOR B – Guide and Feed Spindle Lathe - Connection: 4 kW - Rated current: 9.5 A - Distance between centers: approx. 900 mm - Distance between centers above the bed: approx. 170 mm - Swing over bed: approx. 340 mm - Distance between centers above the carriage: approx. 90 mm - Swing over carriage: approx. 180 mm - Spindle bore: approx. 48 mm The machine is equipped with a tailstock, a Multifix tool holder, and a digital display from the manufacturer ACU-RITE. The machine comes from a training workshop; therefore, the guide and feed spindle are covered. Lhjdpjztwwkofx Ahtok FCA D-73235 Weilheim Teck – loaded onto a truck.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning diameter: 1,800 mm, turning length: 600 mm, spindle bore: 130 mm, spindle speed (max.): 400 rpm, controller model: Siemens 840D Powerline, TECHNICAL DETAILS Lhodpfezv Rlgsx Ahtek Turning diameter: 1,800 mm Turning length: 600 mm Spindle bore: 130 mm Spindle nose: DIN 55027, size 11 Speed range: 1–400 rpm MACHINE DETAILS Control system: Siemens 840D Powerline Total power requirement: 38 / 52 kW Dimensions & Weight Machine weight: approx. 25 t Transport width: 3,700 mm EQUIPMENT 6-jaw chuck

Condition: ready for operation (used), Year of construction: 2009, operating hours: 39,000 h, functionality: fully functional, machine/vehicle number: AT0286, turning length: 650 mm, turning diameter: 400 mm, spindle bore: 4,000 mm, travel distance X-axis: 275 mm, travel distance Y-axis: 90 mm, travel distance Z-axis: 700 mm, spindle motor power: 22,000 W, overall weight: 5,000 kg, Equipment: documentation/manual, SPINNER TC600-65 SMCY Year of manufacture: 2009 We offer for sale a high-quality SPINNER TC600-65 SMCY CNC turning center. The machine is in good technical condition and can be inspected under power by arrangement. - Siemens 840D control system - Tailstock Ljdpfxszux R Uj Ahtehk - Y-axis - Chip conveyor - Bar feeder interface - Tool probe - VDI30 turret (all stations powered) - Chucks - Tool holders - High-pressure coolant system

Condition: good (used), Year of construction: 2005, Parts shown by hand not come. Ledpfezt Samjx Ahtshk

Condition: used, Year of construction: 1982, turning diameter over bed 500 mm turning length 1500 mm centre height 250 mm spindle passage 70 mm Lsdsqy Rp Uspfx Ahtehk swing diameter over face slide 285 mm turning speeds 11,2 - 2240 U/min

Condition: ready for operation (used), Year of construction: 2009, Seiger SLZ 1000 cycle lathe year of construction 2009 Ledeu T Dryspfx Ahtehk center distance 3000mm Circulation over bed 1010 Circulation over facing slide 650 Drive at 100% ED 37KW at 60/ ED 52KW max. torque approx. 9000NM Speed 5-900rpm X Feed force max 240000N Z feed force max 16000N Control Heidenhain Manual Turn with faceplate and steady rest The offer is aimed exclusively at traders within the meaning of §14 BGB

Condition: excellent (used), Year of construction: 1974, turning diameter: 2,550 mm, faceplate diameter: 2,000 mm, rotary table diameter: 2,000 mm, Vertical turning lathe – Jungenthal Manufacturer: Jungenthal Model: DS 20 (early 1970s) Ledjzvw Nfspfx Ahtehk CNC control: FANUC Swing diameter: 2,550 mm Table diameter: 2,000 mm Maximum turning diameter: 2,100 mm Maximum workpiece height: 1,230 mm Maximum table load: 16 tons