Used Magnetic Coil Cable Connector for sale (8,021)

Condition: new, Year of construction: 2026, Extremely powerful industrial magnet for iron separation Special price: €990 net (shipping €14.90 net) *Construction lengths can be found in image 2 The active side is equipped with a stainless steel end plate (material 1.4301). Threaded holes are provided on the rear side for mounting; *handle available on request Fodpfxetqfhxj Anzeph The block magnet systems can be used at temperatures of up to max. +100°C operating temperature. The magnet surface should be cleaned regularly from captured iron parts. Pickup distances for all types, for example: For a steel nut M5: approx. 60 mm For an M5 x 30 screw: approx. 100 mm Mounting example 1: Mounted above a conveyor belt, 'iron parts jump onto the holding surface of the magnet.' Mounting example 2: Mounted within a pipeline system with direct contact to the material flow. For maximum separation safety, a cascade setup of multiple block magnets in series is possible. Assembly and safety instructions: When handling, already upon unpacking and later during installation, ensure that there are no loose iron parts, such as tools or screws, nearby. The magnetic force is so strong that painful injuries may occur if fingers get caught between iron parts and the active surface. There should be no steel parts under the active surface within a minimum distance of 400 mm.

Condition: as good as new (ex-display), Year of construction: 2024, The ideal machine for shredding cables, including optimized cutting geometry, approximately 9 operating hours. Motor: 18.5 kW; 400 V - 50 Hz - 3 phase, Knives: 14 pieces, 40x40mm, multi-rotational, Rotor diameter: 260 mm, Control: Omron PLC, Cutting chamber opening 600 x 800 mm, Hopper volume approx. 0.6 m³, Hydraulically actuated slide Screen hole size optional (15 - 40mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (lxbxh) approx. 1737 x 1167 x 1650 mm The following options are available at an extra cost: - Double knife row + €1,990 net (28 instead of 14) - Surcharge for four-sided segmented base + €2,170 net (prevents the slide from blocking. Recommended when shredding plastics, paper, veneer with a thickness of less than 3 mm). - Raise the shredder by 30 cm (preparation for a conveyor belt) + €1,980 net Fodpfsgmfa Aex Anzeph - Angle conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €6,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) Bea9ia3l27 Requirements for the raw material: - Mineral impurities such as sand, stones, etc. lead to increased wear. We would be happy to offer a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material by freight forwarder, and we will document the test with photos and videos.

Condition: used, Year of construction: 1995, functionality: fully functional, Basic information: Control system: Siemens S7-300 Technical details: Materials processed to date: LDPE, HDPE, thermoplastic flame retardant, PE (-LLD, -LD, -MD, -HD) Intended use: For the production of fiber optic cables and the extrusion of full plastic inserts for steel cables. In addition, a third extruder is installed which can be positioned in front of the system to alternatively use this extruder to produce hoses on the system. Technical condition: Electrical system modernized in 2002 Screw diameter: 1 x 100 / 1 x 45 / 1 x 80 mm Screw length: 24 D Cable diameter max: 24 mm Speed max: 100 m/min Die head: present Operating voltage: 380 V Frequency: 50 Hz Electrical cabinet: present Diameter measuring device: present Plasticizer: present Unwinder: present Winder: present Caterpillar, belt, and disc take-offs: present Extruder: present Number of extruders: 3 Cooling trough: present Dancer / accumulator: present Run-out: present Mixer: present Consisting of: ITAL SPA 2200 unwinder Drum flange diameter max: 2200 mm CAPnet PLH 800 dancer Fsdpfezb N R Hex Anzeph ITAL CN 800 caterpillar take-off CAPnet DFO 350 fiber optic run-out CAPnet JSF 801 guide roller CAPnet RRH 801 guide roller SWISSCAB GPN 18 helical spinner SETIC TRLB 400-1 belt run-out SWISSCAB GPN 18 helical spinner MAILLEFER Guipeur 1 spinner MAILLEFER Guipeur 2 spinner BOREL continuous oven NOKIA-MAILLEFER NMB 100-24D extruder NOKIA-MAILLEFER NMA 30-24D extruder ZUMBACH ODAC 64XY diameter measuring device ITAL cooling section Dryer ZUMBACH ODAC 64XY diameter measuring device ZUMBACH ODAC 63 Trio measuring device ITAL CN 800 caterpillar take-off MAILLEFER ACO 1100-300 accumulator CAPnet CHA 20-40C caterpillar take-off NOKIA-MAILLEFER BTU 6-206 winder Drum flange diameter max: 2250 mm Electrical cabinet MAILLEFER MXC80-24D extruder MAILLEFER MXC80-24D extruder MAILLEFER MXC80-24D extruder MAILLEFER MXC80-24D extruder ADEX cooling section Cooling section / vacuum bath

Condition: good (used), Approx. 27 coil stacking racks – used –: Only sold as a complete lot: Fpjdpfx Anew Hqc Aszjh Price per piece ex-location: €139 (net)! Manufacturer: unknown Model: unknown Year of manufacture: unknown Dimensions (approx.): L: 1m, H: 1m, W: 0.62m Own weight: approx. 72kg Load capacity: 3,000kg Condition: good Available: immediately Location: 67346 Speyer

Condition: used, Year of construction: 2015, machine/vehicle number: 29156, 27781, Decoiler Coil weight: 2 x 4,5 ton Material width max.: 520 mm Coil exterior diameter: 1800 mm Expansion range: 460 - 525 mm Leveller / Straightener Material width : 30 - 500 mm Number of levelling rolls: 11 pcs. Diameter of the levelling rolls: 90 mm Number of pull out rolls: 2 pcs. Diameter of the pull out rolls: 90 mm Number of pinch rolls: 2 pcs. Diameter of pinch rolls: 90 mm Material thickness: 0,8 - 8,0 mm Feeding speed: 3 - 30 m / min Standard configuration Year of manufacture of the decoiler 2015The straightening machine was delivered in 2009 and adapted to the decoiler in 2016 Fpsdpfx Asvg Iqxsnzoh Extended machine accessories Insertion aidLoop bridge

Condition: good (used), functionality: fully functional, machine/vehicle number: 3BC347179-81DV0139, used motor cable YASKAWA 3BC347179-81DV0139 Fpedpfxovpgfyj Anzjh

Condition: good (used), functionality: fully functional, used motor cable YASKAWA 2BCHW0273374-09(HF)146976 Fpodpfxjvpgqpj Anzsh

Condition: good (used), functionality: fully functional, used motor cable YASKAWA 1BCUWO273067-09(EU)147191 Fpsdevpgixspfx Anzjh

Condition: good (used), functionality: fully functional, used motor cable YASKAWA 1BCHW1271593-9-0 Fedpfx Ajvpgk Aonzsph

Condition: good (used), functionality: fully functional, used motor cable YASKAWA 1BCHW0273067-06(U)147190 Fpedpfx Ansvpgl Hezsh

Condition: good (used), functionality: fully functional, used motor cable YASKAWA 1BCHW0273067-69(HF)146931 Fpodpfxsvpgnbj Anzoh

Condition: good (used), functionality: fully functional, used motor cable YASKAWA 2BCHW0270816-09(HF)146963 Fsdpfx Aovpgn Uenzsph

Condition: new, functionality: fully functional, overall weight: 12 kg, total height: 113 mm, total length: 175 mm, total width: 100 mm, Sine table with magnetic clamping plate, 100 x 175 mm Manufacturer: Matchling Type: MCL-4070 Permanent magnet with mechanical on/off switch. Precise and stable construction made of hardened steel. Swivels on one axis. For clamping and machining workpieces at any desired angle. Even clamping force on the pole surface. Accurate angle adjustment using an end stop. Fodpfx Aoymzpfsnzjph Includes storage case. Length: 175 mm Width: 100 mm Height: 113 mm Accuracy: 0.003 / 100 mm Angle: 0–60° Weight: 12.2 kg

Condition: used, Slide belt magnetic conveyor, magnetic slide conveyor DGS System GmbH Z-conveyor, sliding belt conveyor, conveyor belt, magnetic belt conveyor Type no.: MBF 326P31,75 Com. no.: 44489-10 Year of construction 2017 Slide width 300 mm Distance between permanent magnets 250 mm Insertion length approx. 3400 mm (up to body box) Slide-in length approx. 3900 mm (without superstructure box) Slide-in height 210 mm Insertion width housing 370 mm Insertion width threaded mounts for adjustable feet 410 mm Insertion width at body box 470 mm Conveying height - discharge height approx. 1040 mm Fpjdpfx Anei Huzxjzsh Conveyor speed approx. 2 meters/min. Motor power belt drive 0.37 kW Mains connection 400 Volt, 50 Hz - Circulating chain equipped with permanent magnets Space requirement L x W x H 5200 x 700 x 1500 mm Weight 410 kg Very good condition

Condition: used, Strip Straightening Machine for Coil Material WANZKE Type RG 400-7 Coil Processing Line REF No.: 1349-6 Year of manufacture: 1983 Nominal strip width: 400 mm Roll width: 408 mm Strip thickness: max. 2 mm Strip cross-section: max. 600 mm² Roll width, straightening rollers: 408 mm Number of straightening rollers (top): 3 (non-driven) Number of straightening rollers (bottom): 4 (driven) Straightening roller diameter: 50 mm Feed rollers: 2 pcs, Ø 50 mm (lower roller driven) Feed roller width (top): 390 mm Feed roller width (bottom): 408 mm Strip speed: approx. 5 - 45 m/min Motor power: 1.1 kW Power supply: 230 Volt, 50 Hz - Infinitely variable straightening speed via DC motor with DC controller - Drive via geared motor with chain drive - Loop control with speed regulation with 2 speed stages - Upper roller frame adjustable via 4 handwheels - 4 dial gauges for fine adjustment - Mechanical opening of the upper rollers via eccentric lever Fjdpfx Ansxw Rcuszoph - Adjustable lateral strip guide at the infeed side - 2 roller baskets for strip guidance - Electrical diagram available Space required by straightener with control unit (L x W x H): 1200 x 800 x 1600 mm Weight: 620 kg Good condition

Condition: used, Strip Processing Line - Decoiler and Straightening Machine Year of manufacture: 1991 Strip width: 50 to 450 mm Sheet thickness with straightener inactive: 6 mm Sheet thickness with straightener active: 2 mm - Excellent equipment and feed-in aids Required floor space for the complete line (L x W): approx. 7000 x 3000 mm Total weight of the system: approx. 11 tons Good condition Straightening Machine HMS Type RS 47-04/1, Machine No. Strip width, nominal: 400 mm Strip width, max. pass-through: max. 455 mm Strip thickness at 400 mm width: max. 1.5 mm (steel) Strip thickness at 400 mm width: max. 2 mm (copper) Speed: max. 40 m/min Fsdpfoif Sg Sex Anzsph Number of straightening rollers: 7 pcs Straightening roller diameter: Ø 40 mm Number of pinch rollers: 2 pcs Pinch roller diameter: Ø 80 mm Entry height, pass height: 1500 mm - Straightening rollers hardened, ground, and hard-chromed, with central support - Pinch rollers hardened, ground, and hard-chromed, with hydraulic disengagement - Manual straightening roller gap adjust - Feed-in aid with hydraulically extendable tongue and hydraulically adjustable deflection roller - Adjustable side strip guide - All straightening rollers driven via distribution gearbox with cardan shafts - Both pinch rollers driven via gearbox with cardan shafts - Frequency-controlled drive via geared motors - Straightening machine opening stroke 250 mm for cleaning or processing thicker material, stroke movement via trapezoidal thread spindle - Ultrasonic loop control Transport dimensions (L x W x H): 3600 x 2200 x 2200 mm Nett weight: approx. 4 tons Decoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Coil outside diameter: max. 1600 mm (with coil car) Coil outside diameter: max. 2000 mm (without coil car) Coil turntable diameter: Ø 1700 mm Coil inside diameter, expanding range: 460-520 mm Coil width, nominal: max. 630 mm Spreader jaw width: 750 mm Height of the decoiler drum above base plate: 1500 mm - Decoiler drum driven by hydraulic motor and gear - Pneumatic run-on brake on decoiler drum, TWINFLEX - Hydraulic expansion of the decoiler drum, centrally via wedge slider system - Hydraulic hold-down arm with hydraulically driven double pendulum roller - Coil car with 12 tons lifting force and 300 mm stroke - Decoiler frame above floor with motorized cross travel drive Transport dimensions (L x W x H): 3500 x 1900 x 2500 mm Nett weight: approx. 5 tons Central hydraulic unit, adjacent Tank capacity: 350 liters Motor power: 18.5 kW - Drive motor with 2 REXROTH pumps (tandem pump) - Oil cooler as air heat exchanger with fan motor Transport dimensions (L x W x H): 1600 x 850 x 1450 mm Nett weight: approx. 800 kg Electrical cabinet, adjacent - All cable connections via Harting connectors Transport dimensions (L x W x H): 2800 x 500 x 2250 mm Nett weight: approx. 800 kg

Condition: used, empty load weight: 7,725 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 11/2018, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,780 mm, loading space volume: 93 m³, suspension: air, tire size: 385/65 R22,5, color: white, Year of construction: 2018, mileage: 3,14,581 km, Equipment: ABS, Poids à vide: 7725kg, Poids total admissible: 38000kg, Certificat DIN EN 12642 (code XL), Espace de charge (L L H): 13.620 mm x 2.480 mm x 2.780 mmLa taille du pneu: 385/65 R22.5, Volume espace de charge: 93 m³, 1er essieu: , 2ème essieu: , 3ème essieu: , Suspension pneumatique, Dispositif anti- encastrement, Système de freinage électronique EBS, Porte-extincteur, Coffre à outils, Porte roue de secours (2x), Châssis boulonné, Toit coulissant, Fiche de raccordement 1x15 et 2x7 broches, Anti-spray, Disques de frein Essieu 1 39 mmPlaquettes de frein Essieu 1 40% d'usure Disques de frein Essieu 2 43, 5 mmPlaquettes de frein Essieu 2 20% d'usure Disques de frein Essieu 3 40 mmPlaquettes de frein Essieu 3 40% d'usureMines 10/2026 -, Vous trouverez un aperçu de tous nos véhicules disponibles sur notre site web . Besoin d’un financement ? Nous proposons des financements individualisés, ainsi que du full-service ou un service télés serons heureux de vous conseiller personnellement. Fpedjx S Spzepfx Anzsh

Year of construction: 1998, condition: excellent (used), machine/vehicle number: BS605, Technical specifications: 1 Pfaff column slewing crane NL 250KG with 110KG compressed air cable Payload at full radius 250 KG / 0.25to payload (steel construction) Height: about 4.2m UK outrigger: approx. 3.3m Projection: approx. 3.5m Hook height: approx. 2.8 m Fsdpfxjiptyao Anzoph Weight complete approx. 700 kg with 110 kg Demag compressed air cable Pivoting range 270° Crane is dismantled and available immediately Item location is 75053 Gondelsheim There are other cranes available, load capacity 80-5000 kg, please inquire See pictures Dispatch by forwarding agent or pick-up only by appointment

Condition: used, mileage: 6,25,800 km, power: 324 kW (440.52 HP), first registration: 07/2009, fuel type: diesel, tire size: 425/65 R 22.5, axle configuration: 6x6, wheelbase: 6,020 mm, fuel: diesel, driver cabin: day cab, gearing type: automatic, emission class: euro4, total length: 8,550 mm, total width: 2,550 mm, Year of construction: 2009, Equipment: ABS, air conditioning, central locking, crane, cruise control, electric window regulation, trailer coupling, = Additional Options and Accessories = - Aluminum fuel tank - Digital tachograph - Hub reduction - Power Take-Off (PTO) Fedpfezcdp Tsx Anzsph - Radio/CD player - Sun visor - Tow hitch = Additional Information = Technical Information Number of cylinders: 6 Engine displacement: 10,518 cc Axle Configuration Front axle: Tire size: 425/65 R 22.5; Steerable; Tire tread depth left: 20%; Tire tread depth right: 20% Rear axle 1: Tire size: 13 R 22.5; Dual tires; Tire tread depth left inside: 25%; Tire tread depth left outside: 25%; Tire tread depth right inside: 25%; Tire tread depth right outside: 25% Rear axle 2: Tire size: 13 R 22.5; Dual tires; Steerable; Tire tread depth left inside: 25%; Tire tread depth left outside: 25%; Tire tread depth right inside: 25%; Tire tread depth right outside: 25% Weights Unladen weight: 16,290 kg Payload: 15,710 kg GVWR (Gross Vehicle Weight): 32,000 kg Functional Crane: Palfinger / Epsilon Q 18022, behind the cab Tipper: Right / Rear Condition Damage: None

Condition: used, Year of construction: 1994, material width 2000 mm coil weight 35,0 t material thickness 0,6 - 2,5 mm coil internal diameter - 610 mm coil external diameter 900 - 1900 mm material cross-cut 1600 x 2,5 mm² no. of straightening rolls 13 Fjdpfx Ajy Rutyonzeph straightening roll diameter 50 mm speed 0 - 60 m/min power requirement 81,0 + kW weight of straightening machine 14,5 t coil line consisting of: - decoiler make Schleicher, Type HE - 355 - 2100, yom 1994 with auxiliary drive, snubber roll - coil lifting device - extractor device make Schleicher - shear - straightening machine make Schnutz, Type RME 18/50/13-2000 TZ, yom 1994 with infinitely variable drive, 30 intermediate rolls, 117 supporting rolls - coil loop bridge - roll feed make Schleicher, Type WV-SYS-A 160-2000, yom 1994

Condition: new, functionality: fully functional, machine/vehicle number: Produktpakette, empty load weight: 7,800 kg, maximum load weight: 27,200 kg, overall weight: 35,000 kg, axle configuration: 3 axles, total length: 13,850 mm, total width: 2,550 mm, total height: 4,020 mm, suspension: air, tire size: 435/50 R19,5", tire condition: 100 %, Based on proven HANGLER welded construction using high-quality steel, with forward-tapered, welded longitudinal beams. Frame neck with double center web. Longitudinal beams feature punched Z-profile cross members with welded special side frames. Interchangeable 2" kingpin, with a frontward-sloped grinding plate made of high-quality steel sheet. 18 pairs of stake pockets recessed into the outer frame, each with a capacity of 2.5 tons, 8 pairs of folding stake pockets recessed into the outer frame, each with a capacity of 5 tons, total of 24 tons. 2-speed support winch, single-side operation, with a straight lower part, 2 support wedges with holders, aluminum side impact protection, plastic fenders in front of and behind each axle, with anti-splash flaps behind each axle, underrun protection at the rear, splash flaps at the rear across the entire width, coil trough approximately 8,000 mm long with a cover, approximately 40 mm, divided by angled loading beams. Bracing bushings and supports suitable for FR 80/80/4, fully hot-dip galvanized. Inserted bracing 80/80 including lower reinforcement, hydraulic angled loading system with 4 cross beams: hydraulic supply via tractor unit using a 2-line pump system (supply and return) with a 2-way quick-release coupling. Angled loading beams with integrated extension part that can be locked in height. Hydraulic cylinders are multi-stage, with universal joint suspension on each beam. Includes supports - adjustable - with bolt lock. Cylinder passages with strip brush seals on both sides to protect against weather and to clean the piston rods. 5-way control valve to operate the angled loading system and for the folding mechanism. Sliding tarp system, including tarp rail cover. 1 set of coil support bracket with height-adjustable support bolts for different coil diameters, including storage. 1 piece of stop protection for angled sheet - for protection towards the front, BPW or SAF disc brake axles, depending on the manufacturer's choice, axle spacing offset 1310/1450 mm, air suspension, 2-line compressed air brake system, aluminum air reservoir, spring parking brake, axle load recognition via EBS-CAN bus signal, for display on the driver's cab, the truck must be pre-equipped accordingly, "TPMS" tire pressure monitoring system according to ECE R 141, display on the towing vehicle via EBS, 435/50 R 19.5", manufacturer's choice, 24 volts, multi-chamber lights, yellow LED lighting on the side, yellow LED lighting on the side linked with the turn signal "flashing side marker lights", 2 x 7-pole and 1 x 15-pole fail-safe sockets at the front, additional 7-pole socket (according to ISO 1724) in the underrun protection at the rear, pair of warning signs with double LED lighting and extendable to 3,000 mm, removable with connector, LED beacon with holder, switched on via parking lights, plywood panels approximately 30 mm thick, flush-mounted with the side frame! Front panel made of aluminum hollow profiles, fixed, fixed height approximately 2,400 mm above, with wooden slats. Inside reinforced with 3 mm aluminum sheet approximately 630 mm high from the floor as a plinth scuff protection. 2 pieces of permanently installed front VOLUME corner posts, approximately 2,400 mm high, 3 pairs of Kinnegrip center posts approximately 600 mm high with Kinnetop at approximately 2,000 mm, 1 pair of plug-in rear corner posts including reinforcement inside up to the 1st slat row, aluminum hollow profile, approximately 600 mm high, Fpsdpfx Anoi Riw Hszeh

Condition: excellent (used), For sale: Professional ABUS electric hoist with a lifting capacity of 3.2 t, including the original ABUS 3.2 t hook block and an automatic Conductix Wampfler cable reel. The set was removed from an operational facility. Complete set for installation on an overhead crane or transport system in a production hall. Hoist Technical Data • Manufacturer: ABUS Kransysteme GmbH • Lifting capacity: 3.2 t (3200 kg) • Model: GM 1032 • Year of production: 1993 • Lifting height: approx. 6 m • Rope diameter: 7.5 mm • Number of falls: 4/1 • Lifting speed: 1 / 5.3 m/min • Power supply: 380–415 V / 50 Hz • Insulation class: F • Protection class: IP54 Hook block • Manufacturer: ABUS • Lifting capacity: 3.2 t • Swivel hook • Designed for use with ABUS hoists Cable reel • Manufacturer: Conductix Wampfler (Delachaux Group) • Max. voltage: 400 V Fedpfx Aeytymcsnzeph • Protection class: IP55 • Max. current: 22 A Condition • Device dismantled from a working installation • Complete set as shown in the photos

Condition: used, length 700 mm width 500 mm Fpodpfx Ansy S D Rwezsh height 105 mm weight 260 kg The electro-magnetic clamping plate is in good, ready-to-use condition. Length: 700mm Width: 500mm Height: 105mm Weight: 260kg We have two identical magnetic chucks with the same dimensions. See S9063

Condition: used, Year of construction: 2006, weight / kg Fpjdpey S D A Tofx Anzjh weight max. ca. 10 - 12 t weight 750 kg

Condition: used, length / mm width / mm Fpjdpfx Ajy S Dzpenzjh