Used Gemini for sale (46)

Condition: good (used), CMC Italia Gemini Gem 52 Case in gluer Machine in perfect condition, like new. Manufactured by CMC Italia, Italy. This gluing device allows for the application of glue to both sides of the book block. Two gluers, smooth glue thickness adjustment. Chrome rollers, adjustable glue thickness. Very easy to clean. Working width: 520 mm Power supply: 380 V Kodpfx Abjyurz Uecjlp Weight: 250 kg Made in Italy.

Condition: new, functionality: fully functional, power: 1.1 kW (1.50 HP), Year of construction: 2026, G450 Gemini table for gold beneficiation and seperation Kljdpjytnn Isfx Abcsp

Condition: used, Year of construction: 2007, Laminating machine Foliant Gemini 400 S Technical data: Working width: 380 mm Sheets (B3) per hour: 1200 / 1800 (400 GA) Format max. 38 x 58 cm Format min. 32 x 25 cm Machine dimensions: 700 x 1170 x 800 mm Kljdpfx Aovt T Ipsbcep

Condition: like new (used), Year of construction: 2018, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 23435, workpiece weight (max.): 100 kg, grinding depth: 500 mm, center height: 380 mm, center height in crank: 500 mm, total width: 1,590 mm, total length: 2,300 mm, total height: 2,050 mm, spindle speed (min.): 120 rpm, spindle speed (max.): 120 rpm, grinding length: 500 mm, overall weight: 7,000 kg, rotational speed (max.): 120 rpm, rotational speed (min.): 120 rpm, grinding diameter: 120 mm, table speed: 100 mm/min, type of input current: three-phase, workpiece spindle speed (max.): 120 rpm, mount diameter: 150 mm, spindle bore: 450 mm, warranty duration: 24 months, rapid traverse X-axis: 100 m/min, rapid traverse Y-axis: 100 m/min, rapid traverse Z-axis: 100 m/min, center width: 100 mm, grinding spindle speed: 120 rpm, workpiece diameter (max.): 125 mm, grinding spindle motor power: 13 W, clamping diameter: 150 mm, feed length X-axis: 500 mm, feed length Y-axis: 400 mm, feed length Z-axis: 350 mm, feed rate X-axis: 150 m/min, feed rate Y-axis: 150 m/min, feed rate Z-axis: 150 m/min, grinding wheel diameter: 150 mm, input voltage: 400 V, power: 13 kW (17.68 HP), inner diameter: 1 mm, outer diameter: 150 mm, collet bore: 12 mm, cone diameter: 1 mm, grinding height: 400 mm, input frequency: 60 Hz, input current: 63 A, grinding wheel speed: 120 rpm, We are offering this almost new Schneeberger gemini NGM internal and surface grinding machine, manufactured in 2018. Model: gemini NGM Machine number: 23435 Operating voltage: 3×400 V~ Frequency: 50/60 Hz Max. operating current: 63 A Serial number: SN NGM Year of manufacture: 2018 Kjdoynzinopfx Abcjlp If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2000, turning length: 2,000 mm, spindle bore: 105 mm, spindle motor power: 21,000 W, total height: 2,100 mm, total length: 4,500 mm, total width: 2,000 mm, feed rate X-axis: 8,000 m/min, feed rate Y-axis: 8,000 m/min, turning diameter over bed slide: 620 mm, workpiece weight (max.): 2,500 kg, overall weight: 7,800 kg, Very little hours Hydraulic tailstock CE Safety doors Kljdoyuchrspfx Abcjp Multi Fix Tool holders system  D1 Chip conveyor Swing over bed Ø: 620mm Swing over cross slide Ø:370mm DBC Turning Length: 2000mm Spindle bore: 105mm Spindle power: 21kW Tailstock spindle Ø: 100Ø Stroke pinole: 200mm Spindle taper: 6Mk Workpiece weight: 2500 Speeds / ranges: 1600Rpm Feed rate X-Axis: 8000mm/min. Feed rate Z-Axis: 8000mm/min. Length: 4500mm Width: 2000mm Height: 2100mm Weight: 7800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, functionality: fully functional, Year of construction: 2025, pipe diameter (max.): 38 mm, bending angle (max.): 190 °, bending radius (max.): 220 mm, total length: 2,500 mm, power: 14 kW (19.03 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, warranty duration: 24 months, drive type: Servo - Hydraulic, pressure: 150 bar, wall thickness: 2 mm, working length: 2,500 mm, Equipment: documentation/manual, 38x2mm Twin Head Tube Bending Machine Kjdevx D Dxjpfx Abcslp The “Gemini” tube bending machines structures. This type of tube benders bend the tubes with own two bending heads. Gemini has 3 different type which are B, BF, BFR. Ø38mmx2mm BFR series makes bending, rotating and feeding operation automatically.

Condition: new, functionality: fully functional, Year of construction: 2025, pipe diameter (max.): 38 mm, bending angle (max.): 190 °, bending radius (max.): 220 mm, total length: 2,500 mm, power: 8 kW (10.88 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, warranty duration: 24 months, drive type: Servo - Hydraulic, pressure: 150 bar, wall thickness: 2 mm, working length: 2,000 mm, Equipment: documentation/manual, 38x2mm Twin Head Tube Bending Machine Kljdpfx Aevuqmxobcjp The “Gemini” tube bending machines structures. This type of tube benders bend the tubes with own two bending heads. Gemini has 3 different type which are DB, DBF, DBFR. 1 pc. Ø38mmx2mm 2 pcs. Ø25mmx1,5mm 3 pcs. Ø16mmx1,5mm 4 pcs. Ø13mmx1,5mm DB series makes bending operation automatically. DBF series makes bending and feeding operation automatically. DBFR series makes bending, rotating and feeding operation automatically.

Condition: excellent (used), functionality: fully functional, For sale is a Zeiss field emission scanning electron microscope type 40 VP with Gemini optics The system is sold complete with computer, software and cooling system Technical data Windows interface: XP Professional System: Oxford AZtec from 2017 Carl Zeiss Supra 40VP Gemini optics Panasonic CCTV Camera WV-BP332EE EDWARDS Oil-free dry-running scroll pump EDX detector STEM detector Maximum resolution: 1 nm Magnification range: 12x - 900,000x Acceleration voltage: max. 30 kV Software: SmartSEM Zeiss offers support for this device up to and including October 2025 On request, transportation and loading can be organized for an additional charge. can be organized throughout Europe. Prices plus VAT Klsdevb Hwyjpfx Abcep Viewing possible by appointment. Please contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale BUYING / SELLING PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: used, Year of construction: 2007, SCHNEEBERGER - DMR GEMINI - 2007 5-axis CNC tool grinder GEMINY-DMR Geminy 71 DMR + profile grinder Manufacturer: SCHNEEBERGER Year of manufacture: 2007 Technical data of grinders: X-axis - longitudinal slide, stroke 360 ​​mm Y-axis - vertical slide, stroke 270 mm Z-axis - transverse slide, stroke 270mm A-axis -axis for grinding on round, max. rpm 800 rpm C-axis – grinding spindle, 370° rotation, 15 kW, adjustable speed 500-1000 rpm Grinding machine equipment: Control system: Fanuc 310iA5 Standard software for the production and grinding of tools for mechanical engineering Automatic central lubrication Automatic fire extinguishing system Hydraulic workpiece clamping Electrostatic vapor separator Measuring probes Hydraulic workpiece clamping In addition to the standard equipment, both grinders also have special accessories: -UPP-Ultra Precision Package-linear rulers 0.1 micron for the X, Y axes -grinding spindle motor 15 kW -OPC-Optical Profile Control-camera on the grinding spindle-integrated video coordinate system in the machine for measuring the profile of pre-ground and ground tools. Ksdpoyl Shcsfx Abcolp -QUINTO- profile tools dxQ /CAD/CAM/-special program for grinding profile tools. This program, together with OPC, allows you to produce PROFILE TOOLS on grinders - it combines two types of machines into one: a profile grinder /e.g. PTW, AMADA/ and a 5-axis CNC tool grinder, which greatly expands the possibilities of using these machines. -Round grinding machine - a fixture for round grinding with a continuously programmable servo motor. With this software and cameras, we have a classic 5-axis CNC grinder + profile grinder and we have greatly expanded our production capabilities and the ability to reach a much larger range of customers. So we have two grinders in one machine - a toolmaker 5-axis CNC grinder and a profile grinder.

Condition: used, This listing is for the Thermo Scientific A8150001 Gemini AS Heated Slide Stainer The unit is in full working condition and is ready for immediate use The Thermo Scientific Gemini AS Automated Slide Stainer (Model A81500001) is a high-performance staining system designed for histology and pathology laboratories requiring reliable and reproducible slide preparation. This automated staining instrument simplifies laboratory workflows by processing multiple slide racks simultaneously while maintaining consistent staining quality. The A81500001 model includes integrated heated stations, allowing slides to be dried efficiently during staining protocols. The Gemini AS supports a wide range of histological staining procedures and can be programmed for customised protocols, making it suitable for routine staining as well as specialised laboratory applications. Its high capacity and flexible configuration make it ideal for laboratories handling moderate to high sample volumes. With multiple reagent stations and automated timing control, the system reduces manual handling and ensures consistent staining results, improving overall laboratory productivity. Key Features Automated slide staining system for histology laboratories 5 heated stations for slide drying Capacity for up to 12 slide racks Klodpfjyuylhex Abcop Each rack holds up to 20 slides Up to 26 reagent stations Programmable staining protocols Consistent and reproducible results Ideal for pathology, research, and clinical laboratories

Condition: good (used), Year of construction: 1996, functionality: limited functionality, machine/vehicle number: 19046, total height: 2,200 mm, total length: 2,980 mm, total width: 1,470 mm, overall weight: 4,000 kg, - 1 used 5-axis CNC tool grinding machine from Schneeberger with coolant filtration system - Model Gemini PSM, year 1996 with Fanuc Quinto control - General overhaul by Schneeberger in April 2016, hardly used since - Travel: X 360 mm / Y 270 mm / Z 270 mm, center height 210 mm, workpiece holder ISO 50 Kedpfx Ajyag I Hjbcolp - Limited functionality (buffer battery faulty) - Documentation available, on-site inspection possible

Condition: good (used), CNC Lathe with y-axis Geminis Goratu - GHT-4 G4-800 Kodpfx Ajygv Euebcjlp Max. turning Ø:800mm Length: 7000mm Width: 2500mm Height: 2500mm Weight: 10000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1998, condition: excellent (used), Grinding spindle of CNC tool grinding machine Ksdpfx Abjm Tr Hlecjlp Make SCHNEEBERGER Type: GEMINI Year 1998 in good condition .

Condition: used, Year of construction: 2015, functionality: fully functional, A very low-usage glass grinding/polishing line Bottero Gemini 308. The line consists of a loading robot, a processing unit, and a washing unit. Ksdsxw R Abepfx Abcolp

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, track width: 3,000 mm, working range: 6,000 mm, total width: 3,800 mm, total length: 11,000 mm, product height (max.): 70 mm, cutting height (max.): 60 mm, Lind plasma cutting system with HiFocus 360I Hypertherm cutting unit incl. KWE 360, PGV 3. Cutting table with complete extraction system. The plant is fully operational and in excellent condition. Demonstration possible. Original price €190,000.00. The plant is immediately available. The price is valid for purchase decisions made by the end of November!! Dismantling possible in January 2026. Kedpswmq Tzjfx Abcjlp

Condition: reconditioned (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 20780, Fanuc Oi-MB - spindle HSK50 - 50-10'000 min-1 5 axes XYZAC Manufacturing origin CH Voltage 3x400V/50Hz Netweight 8’000 kg Dimensions 1170x2270x2260 mm TECHNICAL DATA (standard) Control GE Fanuc 160 i-MB Axes 5, simultaneously controllable MEASURING SYSTEMS X-, Y- and Z-axes resolution 3 µm A-axis 0,0001° C-axis 0,0001° GRINDING HEAD, GRINDING SPINDLE Power 15 kW Spindle speed 50 – 10'000 min-1 Spindle attachment HSK 50 Max wheel diameter up to 250 mm Max wheel number 6 LINEAR-AXES X-axis, travel 380 mm. Max speed 20'000 mm/min. Resolution 0,0001 mm Gear ratio 1 : 1 Drive power 1.0 kW, 3 Nm Y-axis, travel 300 mm. Max speed 5'000 mm/min. Resolution 0,0001 mm Gear ratio 24 : 4 Drive power 1.0 kW, 8 Nm Z-axis, travel 280 mm. Max speed 20'000 min-1 Resolution 0,0001 mm Gear ratio 1 : 1 Drive power 1.0 kW, 3 Nm SWIVEL-AXES C-axis, angle 210° Max speed 72°/sec. Resolution 0,0001° Drive power 1.0 kW, 8 Nm C-axis’, angle +/- 180° Max speed 90°/sec. Drive power hydraulic A-axis DMR 100 Rotation infinite Max speed 225°/sec. / 3600°/sec. Resolution 0,0001° / 0,0001° Power 1.0 kW / 5.8 kW Taper ISO 50 Center height 210 mm TABLE narrow piece / large piece / total Kledpfjfbt R Eox Abcsp Length 500 mm / 500 mm / 1000 mm Width 145 mm / 330 mm ELECTRIC CONNECTED LOAD 9 kW / 15 kW Power rating 27 kVA / 36 kVA Tension 3x400 V AC Frequency 50 Hz Main fuse 63 AT errors and omissions excepted-data given without obligation

Year of construction: 2006, condition: ready for operation (used), I sell the edge spraying automat with UV-drying and sanding units MAKOR GEMINI 56, Baujahr 2006. 2-Zone Vacuumpainting with self pumps system WITHOUT lost paint 2-Zone UV-drying 2 pcs. Edge sanding aggregates tiltable. Material is immediately dry and useable ! Klodoim Eyxepfx Abcop Very good condition. Available immediately. Possible to test.

Year of construction: 2003, condition: excellent (used), Schneeberger DMR Gemini CNC tool grinding machine TECHNICAL DATA Control: GE Fanuc 160, 5 axes simultaneous Software: Schneeberger Quinto Measuring system X,Y and Z axis: 0.1 μm Kljdpfjmqni Aex Abcep A-axis: 0.0001° C axis: 0.0001° Grinding head Power: 15 kW speed: 50 - 10`000 rpm spindle nose: HSK 50 Max. wheel diameter: 250 mm Max. Number of grinding wheels: 6 Linear axes X-axis, travel: 380 mm feed speed: 20`000 mm/min resolution: 0,0001 mm gear ratio: 1 : 1 Power: 1,0 kW / 3 Nm Y-axis, travel: 300 mm feed speed: 5`000 mm/min resolution: 0,0001 mm Gear ratio: 24 :4 Power: 1,6 kW / 8 Nm Z-axis, travel: 280 mm feed speed: 20`000 mm/min resolution: 0,0001 mm gear ratio: 1 : 1 Power: 1,0 kW / 3 Nm Rotary axes C-axis: 210 ° Speed: 72 ° / s Resolution: 0,0001 ° Power: 1.6 kW / 8 Nm C` axis: +- 180 ° Speed: 90 ° / s Resolution: 0,0001 ° Infeed: Hydraulic A axis: +- 360 ° Speed: 225 ° / s resolution: 0,0001° Power: 1,0 kW Nose: ISO 50 Center height: 210 mm Dimensions and weight Length: 1700 mm Depth: 2270 mm Height: 2260 mm Weight: 8`000 kg We do not guarantee the accuracy, completeness and timeliness of the information.

Condition: excellent (used), Year of construction: 2015, CNC Lathe with c-axis GEMINIS - GHT4-G4 MACH-ID 9182 Make: GEMINIS Type: GHT4-G4 Control: FAGOR 8055 TC Year: 2015 Full C-Axis 360.000 Driven tools Axiaal & Radial  Driven tailstock  Steady rest C-Type Front chuck with 180 bore Rear chuck with 180 bore 3 guide way bed width 750 mm Max. turning Ø: 800mm X-Axis: 450mm Z-Axis: 4200mm Spindle bore: 162mm Speedrange: 900Rpm ATC / revolver: 8 Speed live tools:3000Rpm Power live tools:7.5kW Klsdpfx Aswzh Eqsbcjp Pinole taper: 5Mk Stroke pinole: 250mm Workpiece load: 2500 Length: 8200mm Width: 3200mm Height: 2900mm Weight: 24000kg

Year of construction: 2012, condition: good (used), Ficep Gemini HD36 GANTRY PLATE PROCESSING CENTRE, AUTOMATIC CNC DRILLING, MILLING AND THERMAL CUTTING SYSTEM, serial no. 33275, year of manufacture 2012, 127mm max. thickness, 520N/mm² tensile strength, with fitted eight head tool holder, Klsdpfjivfc Rsx Abcop Hypertherm HyPerformance plasma HPR260XD power supply unit, galvanised steel ducting, Autchazioni AVV.2KW fume extraction unit, approx. 3.5m x 1.75m x 3.9m high, machine bed approx. 9.4m x 3.8m wide

Condition: ready for operation (used), Year of construction: 2014, operating hours: 26,400 h, functionality: fully functional, machine/vehicle number: 1530PG, Submission of a bid obligates timely collection by 29.07.! No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Table dimensions Table width: 1,500 mm Klsdpfx Abjwzw Inecjp Table length: 3,000 mm MACHINE DETAILS Control: Control panel Generator: Hypertherm 130XD EQUIPMENT Consumables and nozzle set Central vacuum system

Year of construction: 2013, condition: excellent (used), functionality: fully functional, Foliant Gemini 400G Automatic Laminator Fully Automatic Digital Print Laminating Machine. Deep Pile Auto Feeder - 300mm Paper stack capacity Max sheet size B3 (380mm wide) Max production speed 15 m/min ( 1,800 x SRA3 sheets per hour) Kjdpfx Abjvrd E Aocjlp Built-in compressor for high-pressure laminating rollers. Auto-control for miss-sheet detection and quality control. Large roll film capacity. (up to 3,000 m) In-line sheet separation. Delivery into a paper jogger 220/240 volt - 50Hz

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, turning diameter over cross slide: 470 mm, turning length: 3,000 mm, turning diameter: 720 mm, spindle bore: 104 mm, CNC Lathe Geminis 4 Plus 720 x 3000 mm Description Manufacturer: Geminis Model: CNC 4 Plus Control: CNC Fagor 8055 FL-BT Capacities: Distance between centers: 3,000 mm Swing over bed: 720 mm Swing over cross slide: 470 mm Spindle bore: 104 mm Tailstock diameter: 100 mm (Morse 6 taper) Bed width: 550 mm Speeds: 2 speed ranges: 0–1600 rpm Rapid traverse: X-axis: 8 m/min Z-axis: 8 m/min Motor: Power: 22 kW Weight: 8,000 kg Equipment: CNC Fagor 8055 FL-BT 3-jaw SHUNK Rota-S Plus chuck Ø 315 mm Additional 3-jaw chuck Fixed steady rest Klsdpfx Abewuligecjp Chip conveyor General condition: Lathe in excellent condition

Condition: excellent (used), functionality: fully functional, turning diameter over cross slide: 580 mm, spindle bore: 84 mm, turning diameter: 870 mm, Geminis lathe model GE 870 of 4000mm between points, turning on bed 870mm, turning on cross slide 580mm, turning on neckline 1100mm, length of neckline 340mm, speeds of 13-1000rpm, diameter of the hole of the shank 84mm, has mounted plate 3 claws diameter 315mm, has plate 4 independent claws of diameter 500mm, has fixed steady rests, lathe in general in good condition. Klodpfxswqz D Es Abcjp

Condition: used, functionality: fully functional, overall weight: 4,000 kg, spindle mount: MK 5, Conventional Lathe Brand: Geminis Model: GE 870 Power: 12.5Hp Distance between centers: 4,000mm Maximum swing over bed: 870mm Maximum swing in gap: 1,100mm Maximum swing over carriage: 580mm Kjdoyc Rylepfx Abcolp Gap length: 340mm Spindle bore: 82mm Speeds: 18 (16-1250) Carriage width: 620mm Tailstock: Morse taper 5 Includes: - 3-jaw chuck 310mm with internal, external, and soft jaws - Faceplate 700mm - Steady rest (closed type) 360mm - DIN backplate for 330mm chuck - Main faceplate / accessory 500mm - Various gears for different thread types Weight: 4,000kg