Used Michael Weinig Carpentry Machine for sale (64,710)

Condition: excellent (used), Year of construction: 2012, Weinig H1000 moulder with E3 infeed and A3 outfeed mechanisation Weinig Hydromat 1000 with 5 Spindles. (Year 2012) Fjdpfx Apjx Rbkxe Djgh Separate electrical panel Separate remote control panel Automatic lubrication system for bedplates Memory system Full sound enclosure Weinig E3 moulder infeed +pack scissors lift (3000kg). Weinig A3 drop leaf outfeed + pack scissors lift (3000kg) + pack outfeed chain conveyor. WEINIG HYDROMAT 1000 230X160mm maximum dimension No 1. 7.5kw - Bottom 6000rpm + Outboard bearing + Straight jointer No 2. 7.5kw - Right 6000rpm + profile jointer No 3. 7.5kw - Left 6000rpm + profile jointer No 4 . 7.5kw - Top 6000rpm + Outboard bearing + Straight jointer No 5 . 7.5kw - Bottom 6000rpm + Outboard bearing + Straight jointer 50mm spindles Beam 0.55kW Full documentation included. Extraction manifold included. POSSIBLE TO PURCHASE MOULDER OR MECHANISATION SEPARATELY AS NEEDED

Condition: excellent (used), Year of construction: 1995, Very well-preserved planer moulder with timed lifting spindles on the right and top, and glazing bead saw. Spindle arrangement: Fsdjx Htc Sepfx Ap Degh Bottom: 4 kW Right: timed lifting spindle Left: 7.5 kW (together with right spindle) Top: 5.5 kW timed lifting spindle Bottom: 5.5 kW Glazing bead saw: 3 kW Equipped with Centrofix planer heads and spare planer heads.

Condition: excellent (used), Weinig four-side planer Fgjdpox E Rzpefx Ap Deh

Condition: good (used), Year of construction: 1981, Chain width: 340 mm Cutting height: 200 mm 2 x 45 kW motors Shaft diameter: 65 mm Electric height adjustment Feed speed variably adjustable via frequency inverter Fgsdpfxsxiu Dmj Ap Deh Includes an additional 3 saw bushings and many spacer rings Still ready for demonstration in a small business; technically flawless condition, but has not been in use for quite some time

Condition: excellent (used), Compact High Speed Planing Line Mechanisation with Stacker Fedpfx Apjxb U Txs Dogh 1. Weinig EM814 moulder infeed with flat chain feeder 2. Weinig 820 high speed right angle moulder outfeed with cross feed sweepers 3. Weinig 811 board stacker with scissors lift (chain feed discharge options) -Boards are automatically transported laterally with the Weinig 820 right angle transfer. -Boards automatically form a layer and are then placed on the lifting table of the chain conveyor -The completed pack is transferred to the following chain conveyor -Maximum output: 40 cycles/minute for stacker (over 150m/min based on average length boards). -Space required: Length approx. 8000 mm, Width approx. 5000 mm approximately -Pack size max 6100mm x 1200mm x 1200mm(high) 3. Weinig cross chains after scissors lift to move full packs away from the stacker when full. Possible to supply with Weinig Hydromat moulders 100m/min as needed.

Condition: new, functionality: fully functional, travel distance X-axis: 510 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, 📝 Description & Additional Technical Parameters Product Description: The VTX-5 is part of the Tongtai VTX Series of compact CNC vertical tapping / milling centers. It is designed to combine high speed, rigidity, and precision in a relatively small footprint. It uses a direct-drive spindle to improve tapping accuracy and reduce maintenance compared to belt-driven designs. Roller guideways (linear rails) are used to ensure smooth, rigid motion. Tool changing is relatively fast, and the structure is optimized for stability and precision under moderate loads. Technical Parameters: Table size: 600x400mm Strokes on X/Y/Z: 510/400/300mm Maxim loading capacity on the table: 250kgs Rapid traverse on X/Y/Z: 60/60/60 m/min Machine size (Width x Depth x Height): 1.700x2.600x2.700mm Machine weight: 2.850kgs Siemens controller model 828D with Shopmill and 10,4inch LCD Spindle speed 12.000 rpm direct driven Spindle motor 5,8kW Tool shank BBT-30 4th axis rotary table diameter 170mm and tailstock CTS ( coolant through spindle) 20bar Chip Conveyor chain type Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts Fjdpfx Apsxni Iqo Dogh are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: used, Stehle HK 630 (semi-automatic straight knife grinder). Specification: • Maximum tool width 630 mm !!! • Tool diameter planer heads (min-max knife heads) 120 - 340 mm • Grinding wheel spindle speed 2850 rpm • Grinding wheel drive 1,1 kW • Clearance angle 10 - 35° • Coolant tank 28 L • Motor coolant pump 0,28 kW Fgedpfxov T Rkhe Ap Doh • Connection values, total 2 kW Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!!

Condition: new, functionality: fully functional, Year of construction: 2025, travel distance X-axis: 50,000 mm, travel distance Y-axis: 4,000 mm, input voltage: 380 V, input frequency: 50 Hz, warranty duration: 24 months, Equipment: cooling unit, GS-50040LB (Bevel Cutting) Ultra-Large Format Laser Cutting Machine 40kW Bevel Cutting + 60kW Straight Cutting Dual Beam, Dual Head, Dual Ultra Ultra-Large Cutting Area: 50m × 4m Dual High-Power Cutting Heads – 60kW Straight & 40kW Bevel Cutting Precision Cutting for Ultra-Thick Plates Fgedpfxev Ng E Te Ap Doh Bevel Cutting Performance: ✔ Y-Bevel: 40kW | 20mm Carbon Steel | 1.4m/min ✔ K-Bevel: 40kW | 30mm Carbon Steel | 0.35m/min ✔ V-Bevel: 40kW | 50mm Carbon Steel | 0.2m/min ✔ Straight Cutting: 60kW | 150mm Carbon Steel | 0.3m/min Applications: Aerospace | Shipbuilding | Bridges | Heavy Machinery

Condition: excellent (used), High speed moulder infeed comprising a freestanding flat magazine in front of a high speed moulder. The infeed magazine is driven by hydraulic motors powered by an 5.5kW hydraulic unit (max 140m/min). Fgodpfx Aswgbxzop Dsh A buffer of feedstock is alligned laying flat side by side on the chain cross feeder. The chain feeder transports parts across to the fence. The part next to the fence is detected by a light beam and the the first roller is raised to allow entry and the transport roller then pushes the workpiece under the feed rollers of the planer. The first feed roller of the planer needs to be freewheeling roller to allow operation of the EM814.

Condition: used, Year of construction: 1981, Weinig U22N Number of spindles: 7 pcs Planing width: 220 mm Planing height: 120 mm Infeed table length: 2,500 mm Driven rollers in table: 2 pcs Rollers in table (not driven): 3 pcs Feed motor: 5.5 kW Counter bearing: spindles 6 and 7 Jointer: spindle 6 Spindle configuration Bottom 5.5 kW Right 3 kW Left 5.5 kW Right 7.5 kW Top 5.5 kW Fgodpox Da Rbofx Ap Doh Top 4 kW Bottom 4 kW

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Five-axis tool grinding machine in very good condition for sale due to lack of use! Fgjdpfxjxw Sxke Ap Djh

Condition: excellent (used), WEINIG Hydromat H23 Line, S/N 87321, year 1999, Ref-No. 103437 WEINIG Cross Conveyor HighMech E-1, equipped with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG Accelerator Model 814 Short infeed table with heavy-duty 4-roller feed unit Planer/moulder with reinforced KASCHWIG three-sided soundproof enclosure • Max. working width: 230 mm • Max. working height: 160 mm • Electronic feed, frequency-controlled, 8–80 m/min • Feed motor 18.5 kW • 1st spindle bottom 11.0 kW • 2nd spindle right 11.0 kW • 3rd spindle left 11.0 kW • 4th spindle right 11.0 kW • 5th spindle left 11.0 kW • 6th spindle top 15.0 kW • 7th spindle bottom 11.0 kW • 8th spindle top 15.0 kW • 9th spindle bottom 15.0 kW • 10th universal spindle 11.0 kW (four-sided) • Spindle speed 6,000 rpm • Spindle diameter ø 50 mm • All spindle motors equipped with NEW motor start/stop brake units • Pneumatically supported top pressure rollers • Feed rollers D=140 mm • 6 driven rollers in the table • Spindles 1 + 6 + 7 + 8 + 9 with counter bearings • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure • Reduced spacing between feed rollers • Hard-chromed table plates • Hard-chromed fences • Pneumatically supported side pressure rollers • Automatic table lubrication • Centralized lubrication points • Free-standing control panel • Connected load approx. 145 kW / approx. 400 A • Free-standing electrical cabinet • Operating instructions, spare parts list and wiring diagram included • Machine sold without cutterheads Machine dimensions approx.: • Length: 6,000 mm • Width: 2,250 mm • Height: 1,800 mm • Weight: approx. 8,500 kg Factory-new WEINIG components installed: NEW horizontal/vertical spindle Fjdpfxswvqklo Ap Dogh NEW counter bearings All spindles with HL bearings All motors newly fitted NEW electronic motor soft start/brake devices NEW hard-chromed table plates NEW hard-chromed fences Many other new parts fitted in the machine Condition: see attached photos – technically in excellent condition Infeed mechanization unrefurbished – complete – fully functional Payment: Net cash before loading Delivery time: By arrangement Delivery: EXW Inspection: Anytime by appointment Errors and prior sale excepted.

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 226-60758, Number of spindles: 5 units Working width: 230 mm Planing height: 120 mm Feed motor: 2.2 kW Feed speed: 5–24 m/min Fgedpfx Aow Svb Top Dsh Total power requirement: 25 kW Dimensions (Length/Width/Height): 3400 x 1800 x 1610 mm Machine weight: approx. 2500 kg Four-Side Planer WEINIG PROFIMAT 23 E - Year of manufacture: 1997 - Serial number: 226-60758 - Maximum working width: 230 mm - Maximum working height: 120 mm - Cardan shaft feed, stepless adjustment 5–24 m/min - Feed motor: 2.2 kW - 1st spindle (bottom): 4.0 kW - 2nd spindle (right) – motor for 2nd right and 3rd left spindle: 7.5 kW - 3rd spindle (left) - 4th spindle (top), motor: 5.5 kW - 5th spindle (bottom), motor: 4.0 kW - Electrically adjustable height and depth: 0.25 kW - All spindles equipped with brake motors - Spindle speed: 6,000 rpm - Spindle diameter: ø 40 mm - Planing table: 2,000 mm with serrated table inserts and straightening guide - Feed rollers with pneumatic pressure - Feed roller diameter: 140 mm - Transport rollers opposite left spindle - Infeed roller before jointer with pneumatic actuation - SICO counters - Manual wax pump - Centralized lubrication points - 1 set of planing heads - Total connected load: 25 kW - Machine dimensions: L=3400 mm, W=1800 mm, H=1610 mm - Weight: 2500 kg

Condition: excellent (used), Weinig 140/4A Four-Side Planer Working width: 140 mm Working height: Number of spindles: 6 Spindle arrangement: Fodpfx Apow Tiyxj Djgh Bottom 3 kW Right 2.2 kW Top 3 kW Bottom 3 kW Right 4 kW Left 3 kW Feed speed adjustable: First gear 4.3/5.3/14.5/18 m/min Second gear 8.6/10.6/29.0/36.0 m/min Total power: 21 kW

Condition: excellent (used), Working width: 30 cm Working height: 46 cm Fgedpfxewy Ruxo Ap Deh Wheel diameter: 1.1 m

Condition: used, Used Weinig A510 surface planer Year of manufacture: ~1970 Manufacturer: Weinig Model: A 510 Working width: 510 mm Table length: 2500 mm Fgedpfoylwdisx Ap Deh 2-knife cutterblock Star-delta starter Extraction connection: Ø 120 mm Weight: approx. 800 kg Dimensions (LxWxH): approx. 250 x 95 x 110 cm

Condition: excellent (used), Year of construction: 2005, We offer a Weinig Super 4 planer in very good condition with EM 15 feed unit, year of manufacture 2005. Manufacturer: Weinig Model: Super 4 Fedjylagmjpfx Ap Djgh Year of manufacture: 2005 Condition: very good Type: planer If you have any questions or need further information, please send us a message or contact us by phone.

Condition: used, XYZ SMX 2000, Year 2017, from research and development facility, tooling and vices in images not included. Prot Trak SMX Control Fgedpex Sauljfx Ap Djh

Condition: ready for operation (used), Year of construction: 2012, XYZ SLX555 x 3m ProtoTRAK Control Gap Bed Centre Lathe Fgsdpfx Ajyaywhop Djh ProtoTRAK SLX Control (2012) Max. Distance Between Centres 3000mm Max. Swing over Bed 560mm Max. Swing over Gap 935mm Max. Swing over Cross slides 350mm Max. Cross slide Travel 290mm Spindle Nose D1-11 Spindle Bore 104mm Spindle Speeds 30 – 1800rpm Spindle Motor 15Hp Quick Change Tool Post Tailstock MT7 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2012 Dimensions: L x D x H 5220 x 2150 x 1950 mm Weight 7400 kg Supplied with: 3 Jaw Chuck Machine Handbooks TRAKing®. Constant Surface Speed. Rapid Traverse with Joy Stick. QCTP & Holders 2 x Fixed Steadys 15” Interlocking Guards Auto Lubrication. Coolant. Worklight We can offer delivery & installation, operator training and warranties. *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79024 Machine Serial Number: SLM00035 £47,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), functionality: fully functional, Radius grinding attachment for DECKEL S11 - Ref ISOG : 2601X00 Fgodezkur Hspfx Ap Djh

Condition: excellent (used), functionality: fully functional, Four-sided planer Weinig Profimat 26 Fortec + EM11 Fodpfeyn Et Rjx Ap Dogh Working width: 230 mm Working height: 130 mm Number of spindles: 5 Spindle arrangement: Bottom 5.5 kW Left Right 11 kW Top 7.5 kW Bottom 5.5 kW Material feeder: Weinig EM 11 Pneumatic pressure rollers divided into 3 sections Feed speed adjustable via frequency inverter: 5–24 m/min CE certificate Technical documentation

Condition: like new (used), Year of construction: 2008, travel distance X-axis: 1,050 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 880 mm, controller model: Fanuc Oi-MC, KAFO HMC 630 HMC Category: HORIZONTAL MACHINING CENTERS (HMC) Reference No.: 400234 Capacity: 630 X 630 MM Year of Construction: 2008 Technical Specification: SPINDLE Spindle Taper : CAT 50 WORKING CAPACITY Fjdsy D E Syjpfx Ap Degh Pallet Size : 630 x 630 mm Travels (XYZ) : X1050 x Y800 x Z880 mm B-Axis : 0.001° Distance from spindle nose to table center : 150 - 1030 mm Distance from spindle center to pallet surface : 100 - 900 mm Table Load Capacity : 1200 kg Max. Work Size : Ø1050 mm ATC Tool Change Capacity : 40 Maximum Tool Weight : 20 Kg CNC Control : Fanuc Oi-MC

Condition: excellent (used), functionality: fully functional, working width 230mm working height 120mm 6 heads heads set: bottom/right/left/top/top/bottom Fsdpfxey N N Shs Ap Djgh spindles speed 6000 rpm variable feeding speed adjustment to 30m/min pneumatic pressure of feeding rolls POWERCOM Controll infeed table length 2470mm

Condition: excellent (used), functionality: fully functional, spindle diameter: 40 mm, spindle speed (min.): 6,000 rpm, working width 230mm working height 140mm 6 spindles spindles set: bottom/right/left/right/top/bottom spindles diameter 40mm variable regulated feeder electric adjustment of infeed fence electric adjustment of infeed table ATS Fgjdpfx Asy N N S Usp Deh fast locking spindle system

Condition: used, Year of construction: 2002, 5 stations + 1 milling unit Digital positioning Table lubrication Fgsdpfsy S Rkqsx Ap Dsh Air cushions in the table Capacity: 230 mm / 120 mm Total power: 43 kW 380 V Equipped with 4 helical tool holders with inserts Machine documentation and service keys Machine overhauled and available in stock