Used Miwe Co 5.1208 for sale (27,555)

Condition: new, machine/vehicle number: 37 R9633-2, Drilling diameter with twist drill: up to 13 mm Drilling diameter with core drill: up to 35 mm Drilling stroke: 115 mm Dcodpfx Aoc N T Hrel Ajk Motor power: 680 W Electrical connection: 220/240 V Magnet base dimensions: 92 x 172 mm Weight: 13 kg

Condition: good (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: FP-201610-09, working width: 960 mm, roll width: 1,000 mm, roll diameter: 1,500 mm, 4 color flexo print machine made in Korea, used for paper cup printing; Max speed 100m/min Max cardboard width - 1000mm Dcjdpfxevkp Dno Al Aok Including: 1) 7 sets of print cylinders, total 28 cylinders 2) 8 aniloxes 3) Printing plate mount table with two cameras 4) Printing plate storage table

Condition: excellent (used), Year of construction: 2018, operating hours: 10 h, functionality: fully functional, Automatic toilet paper and kitchen towel packing machine We have used it for less than 10 hours. After purchase, it did only a couple of test runs and then was stored in a dry warehouse for later use. It had never been used since. There might be some bends on the machine since it has been moved a couple of times. Specification Dcedpfsuyhf Hjx Al Aok Power 220V 50Hz Packing: Toilet paper 2/4/6/8/10 rolls per pack with handle, Hand towel 2/4 rolls per pack with handle Packing in film, overwrapping with meld line on the back. It uses opp film, a max roll diameter of 30cm, and a thickness of 0.03 - 0.10 by the specification, no idea about other materials - have not tested any. For setting up and configuration the machine you will have to contact the manufacturer The machine can be seen, powered on, and set to automatic/manual running. User manual is available, have videos from the manufacturer only

Condition: used, Year of construction: 2018, functionality: fully functional, volume flow: 10.2 m³/h, input voltage: 230 V, USED VACUUM PUMP Technical data Max. pumping speed 50 Hz (mbar) 8.9 m3/h Max. pumping speed 60 Hz (cfm) 6.0 cfm Ultimate vacuum 2 x 10-3 mbar / 1.5 x 10-3 torr Ultimate vacumm with gas ballast 1 x 10-2 mbar / 0.75 x 10-2 torr Ultimate partial vacuum without gas ballast 4 x 10-4 mbar / 3 x 10-4 torr Water vapor tolerance 40 mbar / 30 torr Number of stages 2 Permissible ambient temperature range (operation) 15 - 40 °C Permissible ambient temperature range (storage) -10 - 60 °C Max. outlet pressure (abs.) 1.1 bar Oil capacity min./max. 0.45 / 0.85 l Dcsdsw Rqx Depfx Al Aek Inlet connection small flange KF DN 25 Outlet connection small flange KF DN 25 Rated motor power 0.30 kW Rated speed 50/60 Hz 1500/1800 min-1 Protection class IEC 60529 IP 40 Dimensions (L x W x H) 503 mm x 156 mm x 240 mm Weight 24.8 kg Noise (sound pressure level) in dBA at 50 Hz or 1500 rpm/62% (VARIO)/1500 rpm (VARIO-SP)/12500 Upm (VACUU·PURE®) - 52 dBA NRTL certification - No

Year of construction: 2010, condition: used, For sale is a used vertical, free-flow centrifugal pump from Emile Egger Pumpe & Co. AG, manufactured in 2010. Pump data: Manufacturer: Emile Egger & Co. AG Type: TEOV 41-40 V4 LB3B-2 Serial number: T 200708 Dodpfx Asgbflujl Asck Year of manufacture: 2010 L/s: 2.77 1/min: 1800 m: 14.7 Connections: DN50 and DN65 Length: 182 cm Quantity: 1 Motor data: Manufacturer: VEM motors GmbH Type: K21R 132 S 4T FDS TPM140 /0543 Serial number: 0883082001004H kW: 5.5 V: 400 / 690 A: 11.8 / 6.85 1/min: 1425 Further data can be found on the nameplate.

Year of construction: 2010, condition: used, For sale is a used vertical, free-flow centrifugal pump from Emile Egger Pump & Co. AG, manufactured in 2010. Pump data: Manufacturer: Emile Egger & Co. AG Type: TEOV 41-40 V2 LB3B-2 Serial number: T 202000 Year of manufacture: 2010 L/s: 2.77 1/min: 2390 Dcsdpfogbflmsx Al Ajk m: 26.5 Connections: DN50 and DN65 Length: 192 cm Quantity: 1 Motor: Manufacturer: VEM motors GmbH Year of manufacture: 07/2010 Type: K21R 160M 2 FD TWS HW Serial number: 178086/0001 H kW: 11 HP: 15 V: 400 A: 20 1/min: 2900 Further data, see nameplate.

Condition: used, Year of construction: 1998, Hot-melt Case Sealer – Overview This used hot-melt case sealer by TE-CO is engineered for end-of-line industrial packaging within a used bottling line. The model 607-98 provides reliable, consistent closure of corrugated cartons using a hot-melt adhesive system, making it a proven solution for beverage production environments where wine bottles in cases must be sealed securely prior to palletizing. With robust construction and straightforward operation, it integrates seamlessly with upstream case packers and downstream palletizers to support continuous operation and optimized throughput. Manufactured by TE-CO, this second hand unit focuses on dependable carton closure, ensuring clean glue application, tight seals, and minimal maintenance demands. It is especially suitable for cases containing glass bottles in common formats used by wineries and beverage producers. Designed to work as part of a complete used bottling line or as a stand-alone machine with compatible conveyors, the 607-98 aligns with industrial packaging best practices for efficiency and product protection. Technical Specifications & Performance Data Manufacturer: TE-CO Model: 607-98 Year of manufacture: 1998 Sealing method: Hot-melt (glue) adhesive Application: Case/carton sealing after case packing Typical use: Wine bottle cases within a used bottling line Compatible bottle formats in cases: 0.75L, 1.0L, 1.5L Construction: Industrial end-of-line machine for continuous operation Operation: Inline with case packer upstream and palletizer downstream Advanced Automation & Control Systems The TE-CO hot-melt case sealer is designed for dependable automation in industrial packaging. Typical features include adhesive temperature control for consistent bonding, synchronized infeed and outfeed for smooth case flow, and safety interlocks for protected operation. Operator-friendly controls support quick adjustments and stable performance during format changes. The hot-melt application system helps deliver clean, repeatable glue patterns to ensure secure, uniform sealing. Production Line Integration Capabilities This case sealer integrates naturally into a used bottling line, operating immediately after a case-packing monoblock and before palletizing. It can be synchronized with upstream equipment such as erecting and packing systems and connected downstream to palletizers for automated material handling. The machine supports inline operation with standard conveyors and can run as a stand-alone sealer when properly fed. Dcodpfoxywf Ijx Al Aok Machine Condition & Maintenance History The machine is presented as ready for operation within a second hand used bottling line context. Safety features and documentation are available, supporting commissioning and routine maintenance. Its industrial build promotes reliable service in beverage production environments.

Condition: used, Static frequency converter Manufacturer: GARBE LAHMEYER & Co. AG Type SU3760.2aFZ231 Year of manufacture: 1989 Serial No.: A2K 60229 0001 Dcjdpfx Ashutxzjl Ajk Rated power: 500 kVA Current type: D Mains voltage: 380 volts Input frequency: 50 Hz Input current: 760 amps Rated input current: 760 amps Output voltage: 380 volts Output frequency: 50 Hz Output current: 760 amps Rated output current: 760 amps - Control unit GARBE LAHMEYER, type AEB 60 Cabinet dimensions (W x H x D): 2250 x 800/900 x 2550 mm Transport dimensions (W x H x D): 2430 x 1100 x 2700 mm Weight: 1660 kg

Condition: used, Thread cutting machine LORCH, SCHMIDT & Co Centre height: 200 mm Dcjdpfxoxf Uwxe Al Ask Centre distance: 400 mm Spindle speed: 56 rpm Chuck diameter: 160 mm Tailstock quill travel: 45 mm Tailstock taper: MK2 Motor power: 0.25 HP Power supply: 380 Volt, 50 Hz - Right- and left-hand rotation - 3-jaw chuck - Spindle drive via geared motor - Without through spindle bore - Tailstock with lever quill - Drill chuck MAS 1 to 16 mm Required space (L x W x H): 1200 x 500 x 420 mm Weight: 80 kg Good condition

Year of construction: 2024, operating hours: 1 h, condition: new, functionality: fully functional, machine/vehicle number: 86-731-85552647/18153792542, We are a company based in 9000 St. Gallen (Switzerland) and imported this planetary ball mill from China in 2024. The unit is brand new and unused. We have switched the machine on and let it run empty for a few minutes to verify its functionality. It comes with 4 x 25-liter nylon containers. Additionally, 120 kg of zirconium beads with a 1 mm diameter are available. ~ Manufacturer's Description: The YXQM series of planetary ball mills for mass production is a machine designed for production applications, built to handle medium-scale capacities to meet industrial requirements. It facilitates the smooth transition of materials from laboratory scale to full production, ensuring consistency and repeatability of processes and thus reliable material quality. The equipment is widely used across new energy, metallurgy, electronics, ceramics, geology, mining, construction materials, chemical industry, light industry, cosmetics, environmental protection, and other enterprise-level material production sectors. Extremely high centrifugal forces inherent to planetary ball mills generate intensive grinding energy, resulting in short milling times. These machines are ideal wherever the quality control process demands the highest standards of purity, speed, fineness, and reproducibility. This series can be equipped with vacuum jars, allowing samples to be ground under vacuum conditions. It is well suited for research tasks at scientific institutes, universities, and industrial R&D laboratories to verify the feasibility of scale-up to mass production, as well as for routine operations such as mixing and homogenizing soft, hard, brittle, or fibrous materials—from laboratory tests through to production. - Key Features: Dcodpfxjyilnzs Al Ask - High-performance, nanometer-scale grinding - Digital display, intuitive operation, precise parameter setting - Variable speeds from approx. 10 to 440/360 rpm, speed ratio 1:2 - Batch processing with up to 4×6/9 L samples, simultaneous processing of 4 materials - Electric lid opening and integrated crane for easy and convenient operation - Storage for 3 modes and 15 programs - Power failure protection with memory function and automatic restart - Suitable for dry, wet, vacuum, and protective atmosphere grinding - Machine stops upon lid opening; automatic interlock prevents accidental release - Equipped with rollers and swiveling feet for easy movement and stable operation Applications: Grinding, mixing, homogenizing, colloidal milling, mechanical alloying, mechanochemistry Fields of Application: New energies, geology/metallurgy, glass/ceramics, engineering/electronics, building materials, environment/recycling, agriculture, chemistry, medical, biology Feed material: Soft, hard, brittle, fibrous – dry or wet Size reduction principle: Impact, friction Feed size: < 5 mm soil, < 10 mm Final fineness: For colloidal milling, samples below 0.1 micron Number of grinding stations: 4 Grinding methods: Dry grinding, wet grinding, vacuum grinding, grinding under protective atmosphere

Condition: new, functionality: fully functional, machine/vehicle number: SBT 2057, Year of construction: 2018, 2-deck screening machine 6000 x 1600 x 2000 mm. This machine was purchased by us in 2018 but has never been used. Current screen deck configuration: upper deck equipped with PU screen with 60 mm aperture, lower deck is a flip-flop screen for separation down to 4 mm. Delivery is complete with drive line, spring supports, and springs. Dedpjulf Dpefx Al Ajck

Condition: as good as new (ex-display), Year of construction: 2019, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 19101105, roller width: 1,100 mm, Equipment: full service history, type plate available, The SDFM-1100 roll-to-roll laminator is a multifunctional laminating machine. It is designed for cold and hot laminating. The paper is laminated on one side with the foil. Then the web is re-rolled onto the roll. For cold laminating, the foil is coated with a water-based glue and dried using a heating roller with a warm air drying system. The winding system sends the paper to the laminating section, where the paper is covered with the foil by heating and roller pressure. The rollers use a heated water circulation system with constant temperature control. The paper roll is held by pins, which are controlled by a pneumatic brake. The paper is unrolled to the leveler, which is equipped with automatic leveling of the paper web before laminating, which ensures even coverage of the web with foil. In the laminator, the non-adhesive film is coated with a water-based adhesive and then dried with a heating cylinder or the film already coated with adhesive is unrolled into the laminating cylinder. The laminating cylinder is heated using induction heaters. Under the laminating cylinder, the paper is joined to the film using temperature and pressure generated by the lower rubber roller, which presses the film with the paper against the laminating cylinder. The laminated web is wound onto a core on a shaft in the receiving section, after which it can be transported to subsequent production processes. Specification SDFM-1100 Maximum roll width 1100 mm Maximum roll diameter 1100 mm Paper weight 80 - 500 g/m2 Film thickness 10-50 microns Working speed 10 - 65 m/min Dedpfx Alovy Aipe Asck Electrical voltage 380V 50Hz Total power 78 kW Maximum power consumption 30 kW Total weight 8000 kg Machine dimensions 10130×2130×2960 mm

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, actuation type: electric, pipe diameter (max.): 54 mm, pipe length (max.): 6,000 mm, tube wall thickness (max.): 4 mm, bending angle (max.): 195 °, bending radius (max.): 250 mm, pressure (max.): 250 bar, Equipment: CE marking, centralized greasing system, emergency stop, foot remote control, quick-change device, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Hydraulic piping Pipeline construction Plant construction, e.g. chemical industry Metal construction Sample construction Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Multifunctional machine control Bending angle adjustment (0.1°) Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Maximum 180º bending result Weight 800-900 kg (depending on version) Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site Dcedpeng Exajfx Al Ask - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, functionality: fully functional, Year of construction: 2025, control type: PLC-controlled, actuation type: electric, pipe diameter (max.): 54 mm, pipe length (max.): 6,000 mm, tube wall thickness (max.): 4 mm, bending angle (max.): 195 °, bending radius (max.): 250 mm, bending radius (min.): 9 mm, pressure (max.): 250 bar, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, emergency stop, foot remote control, quick-change device, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Hydraulic piping Pipeline construction Djdpfxsndn Age Al Aeck Plant construction, e.g. chemical industry Metal construction Sample construction Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Multifunctional machine control Bending angle adjustment (0.1°) Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Maximum 180º bending result Weight 600-700 kg (depending on version) Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, PROFILE BENDING ATTACHMENT PB20 The PB20 profile bending attachment is the optimal supplement for tube bending on the 3000 and 6000 models. The device can be easily and quickly mounted on the bending shaft without the use of tools. The workpiece is clamped onto the turntable with the clamping device and pulled around the bending tool. With this system, leg lengths to be bent can be accurately measured in conjunction with a length stop and can be bent with repeatable accuracy. TECHNICAL DATA: Dodenh R Ekepfx Al Aeck - Bending capacity steel 37: 100 x 10 mm, Ø 20 mm. - Many standard tools available - Special tools possible - Sharp-edged tools with bending radius R2 or 5 mm - round tools R 10 to 25 mm for bends max. 260° optional OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, functionality: fully functional, Year of construction: 2026, actuation type: electric, pipe diameter (max.): 35 mm, tube wall thickness (max.): 2 mm, bending angle (max.): 360 °, bending radius (max.): 150 mm, bending radius (min.): 32 mm, overall weight: 28 kg, warranty duration: 12 months, Equipment: CE marking, emergency stop, foot remote control, the mobile bending machine with great performance: The compact, mobile design enables precise and repeatable bending stationary and directly at the installation site up to a tube diameter of 35 mm, CU 42 mm. Dcedpfx Aljnfvx No Ask A powerful three-phase motor and a precision gearbox provide powerful drive. The motor speed is automatically adjusted, resulting in increased return speed and shorter cycle times. Optimum bending accuracy and very high repeatability are achieved by position detection directly on the bending axis. The bending angle is easily and quickly set to 0.5° using pushbuttons. The large LCD display clearly shows the angles. The storage of up to three bending angles enables the rational bending of tubes with different bending results. For transport, the compact unit with accessories can be neatly and safely stored in sturdy transport cases. The "upright tube and rotating tool" principle ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to enable crease-free bending and to bend bends with the slightest deformations from, for example, stainless steel and copper tubes. With the PB20 profile bending attachment, flat, square and round iron can be bent without problems. POSSIBLE APPLICATIONS: - Hydraulic piping - Sample construction - Sanitary and heating construction - Technical data: - Bending capacity Ø 6 to 35 mm, CU Ø 42 mm depending on material. - Bending radius min/max: 36 mm/150 mm - Precise digital bending angle adjustment 0.5°. - Maximum 180º bending result; for special applications Endless operation possible - Hexagonal shaft 40 mm for quick tool change - Safety foot switch with emergency stop function - Alternating current 230 V connection - Weight 29 kg - Frequency converter and three-phase motor - 3 bending angles storable OPTIONAL ACCESSORIES: - Slide shoe holder - double roller holder - Profile bender PB20 - for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm - tripod base - machine case - tool case - Small bending device KBV - Special tool according to specification OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, machine/vehicle number: 1018, THE POWERFUL BENDING MACHINE FOR EXTREME USE: The compact bending machine enables precise and repeatable bending up to an outer diameter of 100 mm stationary and directly at the assembly site. Transport is possible with lift trucks or the optional rollers. A powerful three-phase motor and a precision gearbox provide a powerful drive. The machine convinces with its compact and slim design as well as the very free bending range. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set easily and quickly via a convenient and menu-driven user interface in 14 languages with touchscreen control, which guarantees even more intuitive operation. For more complex bending tasks, 100 bending programs can be stored, with an angle sequence of max. 8 bends per geometry. The multifunction control allows variable adjustment of the bending speed for forward and backward travel, and a parameterizable overbending function is provided to compensate for material springback.With the help of the four material characteristics, the material is automatically overbent to the required bending angle, thus realizing an exact bending result. The principle of "stationary tube and rotating tool" ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to achieve a wrinkle-free bending result and to bend bends with minimal deformations from e.g. stainless steel and copper tubes. With the profile bending attachment PB20 flat, square and round bars can be bent without any problems. Extremely small bending radii are made possible with the KBV small bending attachment. POSSIBLE AREAS OF APPLICATION: Dodpfxendk N As Al Ajck - Plant engineering - Hydraulic piping - Meander bending - prototyping - Sanitary and heating engineering - shipbuilding TECHNICAL DATA 10000: Bending capacity: up to 100 x 5 mm, 55 mm solid material three-phase current 400 V - Bending radius up to 500 mm - Multifunctional machine control Bending angle adjustment (0,1°) - Maximum bending angle 240 - Safety foot switch with emergency stop - Weight 600 kg OPTIONAL ACCESSORIES: - Adapter system for tools from model series 3000/6000 with bending radius from 45 mm, incl. hexagonal shaft 40 mm - Profile bender PB20 - for bending flat and square bars up to max. 100 x 10 mm, round bars up to max. 20 mm - Small bending device KBV - Special tools according to specification - Software adaptations for special tasks OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: 1018, control type: PLC-controlled, degree of automation: manual, actuation type: electric, pipe diameter (max.): 50 mm, pipe length (max.): 6,000 mm, tube wall thickness (max.): 3 mm, bending angle (max.): 195 °, bending radius (max.): 250 mm, warranty duration: 24 months, Equipment: CE marking, emergency stop, foot remote control, quick-change device, THE MANDREL BENDER WITH MANUEL CLAMPING: This mandrel bending machine with manual eccentric quick clamping for tube fixing enables rational bending. The compact drive unit with the detachable mandrel carrier offers advantages when used at the assembly site. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set easily and quickly via a convenient touchscreen control with menu-driven user interface. The comfort control allows two speeds as well as a parameterizable overbending function to compensate for material springback. The bending sequence is significantly shortened by automatic "free travel" at the end of the sheet. For more complex bending tasks, bending programs can be stored with a maximum angle sequence of 50 bends per geometry. An almost unlimited number of programs can be stored on the control or a USB stick, as well as 200 materials. The plug-in bending tools allow rapid conversion to other tube sizes. For difficult geometries, the bending direction of the machine can be changed to right or left bending as standard. The open bending unit allows, for example, the bending of railing frames with only one weld seam. The optional calculation software on the PC determines the cut length for the entire geometry as well as the travel distance, twisting angle and bending angle for each bend. The mandrel retraction is programmable and can be retracted automatically ahead of time when a bending angle is reached. POSSIBLE APPLICATIONS: - Plant engineering, e.g. chemical industry - hydraulic piping - prototyping - Pipeline construction TECHNICAL DATA: - Bending capacity Ø 6 to 50 mm - bending radius min/max: 10 mm/140 mm - Bending radii 2 x D Dsdpfsnfvy Uox Al Aock - multifunction machine control bending angle adjustment (0,1°) - mandrel beam lengths 1500/3000/4500/ 6000 mm (special version also longer) - Maximum 180º bending result - Weight 300-500 kg (depending on version) Optional accessories: - Automatic mandrel lubrication (minimum quantity) - Digital displacement measurement for length and twist (resolution 0.1 OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, THE PRACTICAL HAND BENDING DEVICE: The compact, mobile design allows precise and repeatable bending in the vice. Drive is provided by a screw-in handle. A lockable adjusting ring ensures repeatable bending. The exchange of the plug-in tools is conceivably simple. The principle of "stationary tube and rotating tool" allows bending with the smallest possible footprint. For thin-walled tubes, sliding shoes are used for crease-free bending in order to produce bends with the least possible deformation from, for example, stainless steel and copper tubes. The optional version with a hexagonal mount allows the drive force of the 3000 and 6000 bending systems to be used in addition to the vise. For this purpose, the KBV is simply placed on the bending shaft of the machine. POSSIBLE APPLICATIONS: - Hydraulic piping - prototype construction - Sanitary and heating construction TECHNICAL DATA: - Bending capacity Ø 6 to 18 mm - Manual bending angle limitation - Maximum 180º bending result Dcodong Amkspfx Al Aok OPTIONAL ACCESSORIES: - KBV with hexagonal fixture for bending on model 3000 or 6000 - Machine case - Length stop OUR SERVICE FOR YOU ON SITE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, THE PRECISION 3-ROLL BENDING MACHINE When developing the compact and mobile horizontal bending machine, the focus was clearly set on the production of dimensionally accurate coils such as handrails for spiral staircases. This is the supreme discipline, since two mutually influencing variables (radius and pitch) must be combined in a bend to form a dimensionally accurate geometry. The interaction of tube calculation on the PC, implementation on the bending machine, and control via the measuring equipment with final correction of the bending values ensure accurate bending. By simple and few inputs into the PC tube calculation program, the local printer provides a printout and supports the calculation of all necessary bending and correction data to operate the machine. A new powerful drive concept allows infinitely variable adjustment of the bending speed, requiring only a 230 V (AC) connection. Hardened steel tools as well as hard plastic tools that are gentle on the surface are available for selection. To ensure optimum feed even with tight bending radii, all three bending shafts are driven. The drive concept also proves its worth in tough daily use on the flat, when bending tubes and profiles. Customers of the 4800, 5000 and 6000 bending system have the option of purchasing the roller bending unit without the drive. The roller bending unit with the designation RB43, can be adapted to the bending systems 4800, 5000 and 6000 via the bending shaft. In this case, the machines act as a drive unit. POSSIBLE APPLICATIONS: - Handrails/bottom rails for spiral staircases - Large tubular profile bends - General metal construction TECHNICAL DATA: - Bending capacity Ø 10 to 60 mm - bending radius min: 300 mm at Ø 42,4 mm - Bending direction right and left - Digital bending adjustment for radius and pitch - Safety foot switch with emergency stop function - Maintenance-free robust three-phase motor - Construction site suitable 230 V connection - Weight 280 kg OPTIONAL ACCESSORIES: Dedpfx Aeng A R Sel Asck - Support roller - for stabilization - Lifting roller - to produce controlled slope - MGR - measuring device to determine the correct radius - MGV - measuring device to determine the correct slope based on torsion - MPW - PC calculation program to determine the correct bending values - RB4303 - universal bending tool for profiles up to 60 mm height - Tools for special profiles OUR SERVICE FOR YOU ON SITE: - Welcome to the test production in our house in the demo room - Consultation-information meeting at your site - Consultation and handling as leasing/financing purchase via - Service contracts, maintenance at your site

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, actuation type: electric, pipe diameter (max.): 100 mm, pipe length (max.): 6,000 mm, tube wall thickness (max.): 8 mm, bending angle (max.): 195 °, pressure (max.): 250 bar, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, emergency stop, foot remote control, quick-change device, THE ECONOMICAL MANDREL BENDING MACHINE FOR TIGHT BENDING RADII. For tube dimensions from 20 - 90 mm, this bending system offers solutions for complex geometries with standard radii of 2xD. Depending on material quality and wall thickness ratio, radii of 1.5xD can also be realized suitable for series production. With a tool height of 120 mm, there are also sufficient options for special profiles. The extremely precise and powerful electric drive of the bending axis as well as the stable and rigid construction of the mandrel carrier and the bending arm also contribute to the desired bending result. The plug-in bending tools allow a quick changeover to other tube dimensions. The clamping pressure for the tube clamping can be optimally adjusted. The PLC control (can be expanded as required via USB stick) with data memory and the latest X2X interface can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for a maximum of 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The control system has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. Also available with pneumatic rotation stop or with gear-assisted length and twist positioning. POSSIBLE AREAS OF APPLICATION: - Plant engineering, e.g. chemistry - hydraulic piping - metal construction- prototype construction- pipeline construction TECHNICAL DATA: Bending capacity 7000: Ø 20 to 70 x 5 mmbending capacity 9000: Ø 20 to 90 x 5 mm depending on the material- bending radius min/max: 40 mm/250 mm- Bending radii min: 1.5 x Ø (standard 2 x Ø ) - Multifunction machine control Bending angle adjustment (0,1°) - Mandrel support lengths 3000/4500/6000 mm - Maximum 180º bending result - Weight 1600-3200 kg (depending on version) - Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: - Automatic mandrel lubrication (minimum quantity) - Pneumatic or hydraulic quick chuck - Larger bending radius up to 300 mm Dcsdpfxjnh R Sus Al Aok - Positioning of the length and twist via automatic brake function or via manual stops by foot switch - Semi-automatic positioning of the length and twist via servo motors - Automatic tool retraction - Pipe calculation software - 10 inch touch screen with integrated tube calculation - Data transfer via cable (LAN), via radio (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via - the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, machine/vehicle number: 1018, THE POWERFUL BENDING MACHINE FOR WORKSHOP AND ASSEMBLY. The compact and mobile bending machine enables precise and repeatable bending up to an outer diameter of 60 mm stationary and directly at the assembly site. A powerful three-phase motor and a precision gearbox provide a powerful drive. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set quickly and easily via a convenient, menu-driven user interface with touchscreen control, which guarantees even more intuitive operation. For more complex bending tasks, 100 bending programs can be stored, with an angle sequence of max. 8 bends per geometry. The multifunction control allows variable adjustment of the bending speed for forward and backward travel, and a parameterizable overbending function is provided to compensate for material springback. With the aid of the four material characteristics, the material is automatically overbent to the required bending angle, thus realizing an exact bending result. The "stationary tube and rotating tool" principle ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to achieve a wrinkle-free bending result and to bend bends with minimal deformations from e.g. stainless steel and copper tubes. With the PB20 profile bending attachment, flat, square and round bars can be bent without any problems.Extremely small bending radii are made possible with the KBV small bending attachment. POSSIBLE AREAS OF APPLICATION: - Plant engineering- Hydraulic piping - Meander bending- prototyping- Sanitary and heating construction TECHNICAL DATA: Bending capacity 6000S: Ø 6 to 50 x 4 mm alternating current 230 V Bending capacity 6000D: Ø 6 to 60 x 4 mm Bending capacity 6000DS: Ø 6 to 60 x 5 mm three-phase current 400 V Bending capacity 6000D: Ø 6 to 60 x 4 mm three-phase 400 V - Bending radius min/max: 36 mm/280 mm Dcodpfxeng Ax Sj Al Aek - Optional large bending radii up to 500 mm - Multifunction machine control Bending angle adjustment (0.1°) - Maximum bending angle 240 - Hexagonal shaft 40 mm for quick tool change - Safety foot switch with emergency stop - Weight 110 kg OPTIONAL ACCESSORIES: - Profile bender PB20 - for bending flat and square iron up to max. 100 x 10 mm, round iron up to max. 20 mm - Roller bender RB43 - The RB43 is placed on the 6-edge shaft of the bending axis. By switching over to endless bending, the bending system acts as a drive unit. - Small bending device KBV - Special tool according to specification OUR SERVICE FOR YOU ON SITE: - Welcome to the test production in our house in the demo room - Consultation-information meeting at your site - Consultation and handling as leasing/financing purchase via - Service contracts, maintenance at your site

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 30214501, turning length: 2,000 mm, total length: 12,000 mm, WFL Millturn M60/2000 WORKING RANGE center distance mm 2000 Dcodpfou Hl R Tox Al Aek swing over bed, turning diameter mm 690 MAIN DRIVE AC-drive with 2 gear steps drive power 100% duty cycle kW 40 max. speed min-1 3300 max. torque at the spindle 100% duty cycle Nm 1830 TAILSTOCK quill diameter mm 140 quill travel mm 160 quill force (adjustable) N 3500-31000 quill with installed live center MK 5 TOOL HOLDER (single tool holder, turning-boring-milling unit) AC-drive drive power 100% duty cycle kW 30 speed range max. min-1 6000 max. torque at the spindle 100% duty cycle Nm 315 travel vertical to the X/Z-plane (Y-axis) mm 300[-125/+175] pivot capability of the milling spindle (B-axis) ° -110/+90 spindle head acc. DIN 69893 HSK-A100 spindle diameter in front bearing mm 100 DIMENSIONS length (max. tool magazine) m 11 width/height m 3,9/3,3

Condition: like new (used), Miwe FBC baking oven for 60x40, condition as new Dsdpfx Aloxywm Ss Aock -with hood and fan -10-deck oven requires 19.7 kW -6-deck oven requires 9.3 kW -with steam condenser including exhaust hood -with automatic cleaning -door lock with PIN -with loading trolley -400/230V 3/N/PE 50 Hz -external dimensions: 90x127x210 cm (WxDxH)

Year of construction: 2015, condition: good (used), functionality: fully functional, machine/vehicle number: A-150016, AUTOMATED ADHESIVE APPLICATION MACHINE, GANTRY SYSTEMS, AND AUTOMATED METAL INSERT PLACEMENT UNIT This system is part of a larger production line; please refer to our other listings for more information. The offered system includes 3 provision stations for facing sheets, an automated adhesive application machine for sandwich panel bonding, a lay-up conveyor for manual assembly of the inlay/ribbing, gantry systems for manipulating the facing sheets, and an automated placement unit for metal inserts/reinforcement points. COMPONENT DIMENSIONS (from previous production): L/W min: 2000mm x 1500mm L/W max: 8000mm x 2500mm H min: 12mm Dcjdeyt Nm Sspfx Al Ask H max: 60mm MATERIALS (from previous production): GRP, sheet metal, plywood, wood/PU strips, PVC, Styrofoam GLUING GANTRY FOR CONTOUR & SURFACE BONDING (of the facing sheets & inlays): Number of needle valves surface: 104 Number of needle valves contour: 1 Adhesive system: 1K-PUR Number of nozzles in water spray unit: 8 AUXILIARY UNITS: Climate chamber (storage for 1K-PUR adhesive) Vacuum pump for gantry systems Punching unit