Used Nilma Idrover 50 for sale (33,292)

Condition: new, Year of construction: 2025, load capacity: 5,000 kg, lifting height: 3,980 mm, total length: 6,000 mm, Bedienertyp Sitzen Bjdpfx Adoycl Eco Dowl · Max. Tragkraft 5000 kg · Lastschwerpunkt 600 mm · Lastabstand, Mitte der Antriebsachse bis zur Gabel 773 mm · Vorderachslast (beladen) / Hinterachslast (beladen) 11520 kg / 1805 kg · Vorderachslast ohne Last / Hinterachslast ohne Last 3285 kg / 5040 kg · Bereifung Pneumatisch · Anzahl der Vorderräder / Hinterräder 2 / 2 · Anzahl der Antriebsräder 4 · Vorderspur 1620 mm · Abstand zwischen den Hinterrädern 1740 mm · Höhe Schutzdach (Kabine) / Gesamthöhe mit niedrigem Fahrerschutzdach (Buggie-Ausführung) 2486 mm / 2486 mm · Sitzhöhe 1455 mm · Gabelträger DIN 15173 A/B 4A · Gangbreite für Palette 1000 x 1200 quer 6812 mm · Gangbreite für Palette 800 x 1200 längs 6812 mm · Wenderadius 4640 mm · Fahrgeschwindigkeit (beladen / unbeladen) 10 km/h / 22 km/h · Hubgeschwindigkeit (beladen / unbeladen) 0.40 m/s / 0.40 m/s · Absenkgeschwindigkeit (beladen / unbeladen) 0.50 m/s / 0.40 m/s · Festellbremse Hydraulik · Nennleistung Verbrennungsmotor 55 kW · Hersteller / Motor Modell / Motornorm Deutz / TCD 2,9 / Stage V · Nenndrehzahl 2300 rpm · Anzahl der Zylinder / Tragfähigkeit der Zylinder 4 - 2925 cm³ · Arbeitsdruck Zusatzsteuerkreis für Anbaugeräte 230 bar · Ölmenge für Anbaugerät 97 l/min · Geräuschpegel am Ohr des Fahrers gemäß DIN 12 053: 78 dB

Condition: used, Year of construction: 2021, load capacity: 5,000 kg, lifting height: 5,570 mm, total length: 5,010 mm, · Bedienertyp Sitzen · Max. Tragkraft 5000 kg · Lastschwerpunkt 600 mm · Lastabstand, Mitte der Antriebsachse bis zur Gabel 773 mm · Vorderachslast (beladen) / Hinterachslast (beladen) 11520 kg / 1805 kg · Vorderachslast ohne Last / Hinterachslast ohne Last 3285 kg / 5040 kg · Bereifung Pneumatisch · Anzahl der Vorderräder / Hinterräder 2 / 2 · Anzahl der Antriebsräder 4 · Vorderspur 1620 mm · Abstand zwischen den Hinterrädern 1740 mm · Höhe Schutzdach (Kabine) / Gesamthöhe mit niedrigem Fahrerschutzdach (Buggie-Ausführung) 2486 mm / 2486 mm · Sitzhöhe 1455 mm · Gabelträger DIN 15173 A/B 4A · Gangbreite für Palette 1000 x 1200 quer 6812 mm · Gangbreite für Palette 800 x 1200 längs 6812 mm · Wenderadius 4640 mm · Fahrgeschwindigkeit (beladen / unbeladen) 10 km/h / 22 km/h · Hubgeschwindigkeit (beladen / unbeladen) 0.40 m/s / 0.40 m/s · Absenkgeschwindigkeit (beladen / unbeladen) 0.50 m/s / 0.40 m/s · Festellbremse Hydraulik · Nennleistung Verbrennungsmotor 55 kW · Hersteller / Motor Modell / Motornorm Deutz / TCD 2,9 / Stage V · Nenndrehzahl 2300 rpm · Anzahl der Zylinder / Tragfähigkeit der Zylinder 4 - 2925 cm³ Bsdoxd Erkepfx Ad Dowl · Arbeitsdruck Zusatzsteuerkreis für Anbaugeräte 230 bar · Ölmenge für Anbaugerät 97 l/min · Geräuschpegel am Ohr des Fahrers gemäß DIN 12 053: 78 dB

Condition: used, Year of construction: 2022, load capacity: 5,000 kg, lifting height: 5,540 mm, total length: 6,240 mm, · Bedienertyp Sitzen · Max. Tragkraft 5000 kg · Lastschwerpunkt 600 mm · Lastabstand, Mitte der Antriebsachse bis zur Gabel 773 mm · Vorderachslast (beladen) / Hinterachslast (beladen) 11520 kg / 1805 kg · Vorderachslast ohne Last / Hinterachslast ohne Last 3285 kg / 5040 kg · Bereifung Pneumatisch · Anzahl der Vorderräder / Hinterräder 2 / 2 · Anzahl der Antriebsräder 4 · Vorderspur 1620 mm · Abstand zwischen den Hinterrädern 1740 mm · Höhe Schutzdach (Kabine) / Gesamthöhe mit niedrigem Fahrerschutzdach (Buggie-Ausführung) 2486 mm / 2486 mm · Sitzhöhe 1455 mm · Gabelträger DIN 15173 A/B 4A · Gangbreite für Palette 1000 x 1200 quer 6812 mm · Gangbreite für Palette 800 x 1200 längs 6812 mm · Wenderadius 4640 mm · Fahrgeschwindigkeit (beladen / unbeladen) 10 km/h / 22 km/h · Hubgeschwindigkeit (beladen / unbeladen) 0.40 m/s / 0.40 m/s · Absenkgeschwindigkeit (beladen / unbeladen) 0.50 m/s / 0.40 m/s · Festellbremse Hydraulik · Nennleistung Verbrennungsmotor 55 kW · Hersteller / Motor Modell / Motornorm Deutz / TCD 2,9 / Stage V · Nenndrehzahl 2300 rpm · Anzahl der Zylinder / Tragfähigkeit der Zylinder 4 - 2925 cm³ · Arbeitsdruck Zusatzsteuerkreis für Anbaugeräte 230 bar Bwsdpfxoxd Exdj Ad Djl · Ölmenge für Anbaugerät 97 l/min · Geräuschpegel am Ohr des Fahrers gemäß DIN 12 053: 78 dB

Condition: new, Year of construction: 2025, load capacity: 5,000 kg, lifting height: 5,530 mm, total length: 6,000 mm, Bedienertyp Sitzen · Max. Tragkraft 5000 kg · Lastschwerpunkt 600 mm · Lastabstand, Mitte der Antriebsachse bis zur Gabel 773 mm · Vorderachslast (beladen) / Hinterachslast (beladen) 11520 kg / 1805 kg · Vorderachslast ohne Last / Hinterachslast ohne Last 3285 kg / 5040 kg Bwedpoxd D Svsfx Ad Del · Bereifung Pneumatisch · Anzahl der Vorderräder / Hinterräder 2 / 2 · Anzahl der Antriebsräder 4 · Vorderspur 1620 mm · Abstand zwischen den Hinterrädern 1740 mm · Höhe Schutzdach (Kabine) / Gesamthöhe mit niedrigem Fahrerschutzdach (Buggie-Ausführung) 2486 mm / 2486 mm · Sitzhöhe 1455 mm · Gabelträger DIN 15173 A/B 4A · Gangbreite für Palette 1000 x 1200 quer 6812 mm · Gangbreite für Palette 800 x 1200 längs 6812 mm · Wenderadius 4640 mm · Fahrgeschwindigkeit (beladen / unbeladen) 10 km/h / 22 km/h · Hubgeschwindigkeit (beladen / unbeladen) 0.40 m/s / 0.40 m/s · Absenkgeschwindigkeit (beladen / unbeladen) 0.50 m/s / 0.40 m/s · Festellbremse Hydraulik · Nennleistung Verbrennungsmotor 55 kW · Hersteller / Motor Modell / Motornorm Deutz / TCD 2,9 / Stage V · Nenndrehzahl 2300 rpm · Anzahl der Zylinder / Tragfähigkeit der Zylinder 4 - 2925 cm³ · Arbeitsdruck Zusatzsteuerkreis für Anbaugeräte 230 bar · Ölmenge für Anbaugerät 97 l/min · Geräuschpegel am Ohr des Fahrers gemäß DIN 12 053: 78 dB

Condition: used, Year of construction: 2023, load capacity: 5,000 kg, lifting height: 5,550 mm, fork length: 1,200 mm, total length: 4,910 mm, · Bedienertyp Sitzen · Max. Tragkraft 5000 kg Bsdpfxsxd E Ncs Ad Djwl · Lastschwerpunkt 600 mm · Lastabstand, Mitte der Antriebsachse bis zur Gabel 773 mm · Vorderachslast (beladen) / Hinterachslast (beladen) 11520 kg / 1805 kg · Vorderachslast ohne Last / Hinterachslast ohne Last 3285 kg / 5040 kg · Bereifung Pneumatisch · Anzahl der Vorderräder / Hinterräder 2 / 2 · Anzahl der Antriebsräder 4 · Vorderspur 1620 mm · Abstand zwischen den Hinterrädern 1740 mm · Höhe Schutzdach (Kabine) / Gesamthöhe mit niedrigem Fahrerschutzdach (Buggie-Ausführung) 2486 mm / 2486 mm · Sitzhöhe 1455 mm · Gabelträger DIN 15173 A/B 4A · Gangbreite für Palette 1000 x 1200 quer 6812 mm · Gangbreite für Palette 800 x 1200 längs 6812 mm · Wenderadius 4640 mm · Fahrgeschwindigkeit (beladen / unbeladen)10 km/h / 22 km/h · Hubgeschwindigkeit (beladen / unbeladen) 0.40 m/s / 0.40 m/s · Absenkgeschwindigkeit (beladen / unbeladen) 0.50 m/s / 0.40 m/s · Festellbremse Hydraulik · Nennleistung Verbrennungsmotor 55 kW · Hersteller / Motor Modell / Motornorm Deutz / TCD 2,9 / Stage V · Nenndrehzahl 2300 rpm · Anzahl der Zylinder / Tragfähigkeit der Zylinder 4 - 2925 cm³ · Arbeitsdruck Zusatzsteuerkreis für Anbaugeräte 230 bar · Ölmenge für Anbaugerät 97 l/min · Geräuschpegel am Ohr des Fahrers gemäß DIN 12 053: 78 dB

Condition: used, Year of construction: 2022, load capacity: 5,000 kg, lifting height: 5,530 mm, fork length: 1,200 mm, total length: 4,900 mm, · Bedienertyp Sitzen · Max. Tragkraft 5000 kg · Lastschwerpunkt 600 mm · Lastabstand, Mitte der Antriebsachse bis zur Gabel 773 mm · Vorderachslast (beladen) / Hinterachslast (beladen) 11520 kg / 1805 kg · Vorderachslast ohne Last / Hinterachslast ohne Last 3285 kg / 5040 kg · Bereifung Pneumatisch · Anzahl der Vorderräder / Hinterräder 2 / 2 · Anzahl der Antriebsräder 4 · Vorderspur 1620 mm · Abstand zwischen den Hinterrädern 1740 mm · Höhe Schutzdach (Kabine) / Gesamthöhe mit niedrigem Fahrerschutzdach (Buggie-Ausführung) 2486 mm / 2486 mm · Sitzhöhe 1455 mm · Gabelträger DIN 15173 A/B 4A · Gangbreite für Palette 1000 x 1200 quer 6812 mm · Gangbreite für Palette 800 x 1200 längs 6812 mm · Wenderadius 4640 mm Bedpox Tvfpefx Ad Djwl · Fahrgeschwindigkeit (beladen / unbeladen) 10 km/h / 22 km/h · Hubgeschwindigkeit (beladen / unbeladen) 0.40 m/s / 0.40 m/s · Absenkgeschwindigkeit (beladen / unbeladen) 0.50 m/s / 0.40 m/s · Festellbremse Hydraulik · Nennleistung Verbrennungsmotor 55 kW · Hersteller / Motor Modell / Motornorm Deutz / TCD 2,9 / Stage V · Nenndrehzahl 2300 rpm · Anzahl der Zylinder / Tragfähigkeit der Zylinder 4 - 2925 cm³ · Arbeitsdruck Zusatzsteuerkreis für Anbaugeräte 230 bar · Ölmenge für Anbaugerät 97 l/min · Geräuschpegel am Ohr des Fahrers gemäß DIN 12 053: 78 dB

Condition: used, Year of construction: 2022, load capacity: 5,000 kg, lifting height: 5,550 mm, total length: 6,238 mm, · Bedienertyp Sitzen · Max. Tragkraft 5000 kg · Lastschwerpunkt 600 mm · Lastabstand, Mitte der Antriebsachse bis zur Gabel 773 mm · Vorderachslast (beladen) / Hinterachslast (beladen) 11520 kg / 1805 kg · Vorderachslast ohne Last / Hinterachslast ohne Last 3285 kg / 5040 kg · Bereifung Pneumatisch · Anzahl der Vorderräder / Hinterräder 2 / 2 · Anzahl der Antriebsräder 4 · Vorderspur 1620 mm · Abstand zwischen den Hinterrädern 1740 mm · Höhe Schutzdach (Kabine) / Gesamthöhe mit niedrigem Fahrerschutzdach (Buggie-Ausführung) 2486 mm / 2486 mm · Sitzhöhe 1455 mm · Gabelträger DIN 15173 A/B 4A · Gangbreite für Palette 1000 x 1200 quer 6812 mm Bwodpfx Ajxd Ev Aod Djl · Gangbreite für Palette 800 x 1200 längs 6812 mm · Wenderadius 4640 mm · Fahrgeschwindigkeit (beladen / unbeladen) 10 km/h / 22 km/h · Hubgeschwindigkeit (beladen / unbeladen) 0.40 m/s / 0.40 m/s · Absenkgeschwindigkeit (beladen / unbeladen) 0.50 m/s / 0.40 m/s · Festellbremse Hydraulik · Nennleistung Verbrennungsmotor 55 kW · Hersteller / Motor Modell / Motornorm Deutz / TCD 2,9 / Stage V · Nenndrehzahl 2300 rpm · Anzahl der Zylinder / Tragfähigkeit der Zylinder 4 - 2925 cm³ · Arbeitsdruck Zusatzsteuerkreis für Anbaugeräte 230 bar · Ölmenge für Anbaugerät 97 l/min · Geräuschpegel am Ohr des Fahrers gemäß DIN 12 053: 78 dB

Condition: used, Year of construction: 2022, load capacity: 5,000 kg, lifting height: 5,530 mm, total length: 6,240 mm, · Bedienertyp Sitzen · Max. Tragkraft 5000 kg · Lastschwerpunkt 600 mm · Lastabstand, Mitte der Antriebsachse bis zur Gabel 773 mm · Vorderachslast (beladen) / Hinterachslast (beladen) 11520 kg / 1805 kg · Vorderachslast ohne Last / Hinterachslast ohne Last 3285 kg / 5040 kg · Bereifung Pneumatisch · Anzahl der Vorderräder / Hinterräder 2 / 2 · Anzahl der Antriebsräder 4 · Vorderspur 1620 mm · Abstand zwischen den Hinterrädern 1740 mm · Höhe Schutzdach (Kabine) / Gesamthöhe mit niedrigem Fahrerschutzdach (Buggie-Ausführung) 2486 mm / 2486 mm Bwjdpfx Ajxd E E Rjd Djl · Sitzhöhe 1455 mm · Gabelträger DIN 15173 A/B 4A · Gangbreite für Palette 1000 x 1200 quer 6812 mm · Gangbreite für Palette 800 x 1200 längs 6812 mm · Wenderadius 4640 mm · Fahrgeschwindigkeit (beladen / unbeladen) 10 km/h / 22 km/h · Hubgeschwindigkeit (beladen / unbeladen) 0.40 m/s / 0.40 m/s · Absenkgeschwindigkeit (beladen / unbeladen) 0.50 m/s / 0.40 m/s · Festellbremse Hydraulik · Nennleistung Verbrennungsmotor 55 kW · Hersteller / Motor Modell / Motornorm Deutz / TCD 2,9 / Stage V · Nenndrehzahl 2300 rpm · Anzahl der Zylinder / Tragfähigkeit der Zylinder 4 - 2925 cm³ · Arbeitsdruck Zusatzsteuerkreis für Anbaugeräte 230 bar · Ölmenge für Anbaugerät 97 l/min · Geräuschpegel am Ohr des Fahrers gemäß DIN 12 053: 78 dB

Condition: used, Year of construction: 2022, load capacity: 5,000 kg, lifting height: 5,550 mm, total length: 6,238 mm, · Bedienertyp Sitzen · Max. Tragkraft 5000 kg · Lastschwerpunkt 600 mm · Lastabstand, Mitte der Antriebsachse bis zur Gabel 773 mm · Vorderachslast (beladen) / Hinterachslast (beladen) 11520 kg / 1805 kg · Vorderachslast ohne Last / Hinterachslast ohne Last 3285 kg / 5040 kg · Bereifung Pneumatisch · Anzahl der Vorderräder / Hinterräder 2 / 2 · Anzahl der Antriebsräder 4 · Vorderspur 1620 mm · Abstand zwischen den Hinterrädern 1740 mm · Höhe Schutzdach (Kabine) / Gesamthöhe mit niedrigem Fahrerschutzdach (Buggie-Ausführung) 2486 mm / 2486 mm · Sitzhöhe 1455 mm · Gabelträger DIN 15173 A/B 4A · Gangbreite für Palette 1000 x 1200 quer 6812 mm · Gangbreite für Palette 800 x 1200 längs 6812 mm · Wenderadius 4640 mm · Fahrgeschwindigkeit (beladen / unbeladen) Bwsdpoxd Ebfsfx Ad Djl 10 km/h / 22 km/h · Hubgeschwindigkeit (beladen / unbeladen) 0.40 m/s / 0.40 m/s · Absenkgeschwindigkeit (beladen / unbeladen) 0.50 m/s / 0.40 m/s · Festellbremse Hydraulik · Nennleistung Verbrennungsmotor 55 kW · Hersteller / Motor Modell / Motornorm Deutz / TCD 2,9 / Stage V · Nenndrehzahl 2300 rpm · Anzahl der Zylinder / Tragfähigkeit der Zylinder 4 - 2925 cm³ · Arbeitsdruck Zusatzsteuerkreis für Anbaugeräte 230 bar · Ölmenge für Anbaugerät 97 l/min · Geräuschpegel am Ohr des Fahrers gemäß DIN 12 053: 78 dB

Condition: excellent (used), CTS Type: TSS-70/350-A Water-cooled refrigeration unit For sale is a high-quality temperature shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/350-A. This unit is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Typical applications: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical specifications: Type: TSS-70/350-A Temperature range: Warm chamber: +50°C to +200°C Cold chamber: -70°C to +100°C Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 20.4 kW Rated current: approx. 36.5 A Refrigeration system: Refrigerant: R404A / R23 Precooling stage: approx. 6.0 kg Cooling stage: approx. 3.0 kg Water-cooled Features / Equipment: - CTS control panel with touch display - Microprocessor-controlled regulation and monitoring system - Program operation - Digital setpoint and actual value display - 2-zone system (warm and cold chamber) - Automatic transfer basket for shock tests Bsdpfoy Hkgbox Ad Djwl Technical design: - Warm and cold chamber separated - Transfer basket system for rapid temperature change - Test chamber made of stainless steel - Insert shelf / wire rack - Viewing window in door - Water cooling connections available - Integrated control cabinet Dimensions: External dimensions (HxWxD): approx. 2335 x 940 x 1820 mm Installation dimensions (HxWxD): approx. 1990 x 940 x 1652 mm Internal dimensions (HxWxD): approx. 410 x 480 x 660 mm Weight: approx. 950 kg Additional data: Protection class: IP 54 Operating overpressure: approx. 25 bar Test pressure: approx. 27.5 bar For your safety as a buyer, please note the following information! The following points are carried out on the chambers we offer before sale: 1. Functional check and replacement of necessary components 2. If needed, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run Condition: used Scope of delivery: see pictures (Specifications subject to change and errors excepted!) We are happy to answer any further questions by phone.

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled chiller unit For sale is a high-quality thermal shock test chamber manufactured by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for thermal shock testing and is commonly used in industry, research, and quality assurance. Application fields: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from room temperature to +180°C Cooling rate: approx. 4 K/min from room temperature to -60°C Temperature deviation: ±1 K over time ±2 K spatially Temperature change rate: Max. 100 K/min on average for shock test cycles (without radiant heat) Transfer rate: ≤ 15 min in the range -65°C to +200°C with 10 kg ICs Transfer time: < 10 seconds Electrical data: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 16.7 kW Nominal current: approx. 26.8 A Site-side fuse: 32 A slow-blow Connection: Cekon 32 Cooling system: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features and equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Program operation (up to 100 test programs) - Digital setpoint/actual value display - RS232 interface - 2 free switching channels for controlling test objects on-site - Fault alarm with floating contact (rated for up to 30 V-DC, 2 A) - EMC tested Technical design: - Hot and cold chambers - Transport basket with spindle drive - Test chamber / basket made of stainless steel, Material no. 1.4301 - Insert basket made of stainless steel wire - Pipe duct NW 50 with closing plug - Compressed air connection 1/4" male - Pressureless condensate drain R 1/2" internal thread Bedpfxey Hkfdj Ad Dewl - Safety door lock - Lockable door with window Dimensions as per installation drawing: External dimensions approx.: 2335 x 940 x 1820 mm Entry dimensions approx.: 1990 x 940 x 1652 mm Test chamber dimensions: Height approx. 410 mm, Width approx. 480 mm, Depth approx. 660 mm Window: 300 x 300 mm Further data: Degree of protection: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average power consumption per test cycle: approx. 8 kWh For your assurance as a buyer, the following procedures are performed on all offered chambers beforehand: 1. Function check and replacement of necessary components 2. If required, recharge with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented trial run Condition: used Scope of delivery: see pictures (Specifications subject to change and errors excepted!) If you have further questions, we are happy to assist you by phone.

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Changeover time: - < 10 seconds Bwjdpfx Aey Hkd Hed Dsl Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features/Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket - Tube port NW 50 with sealing plug - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Additional Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone.

Condition: like new (used), Year of construction: 2010, operating hours: 32,498 h, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, nominal power (apparent): 35 kVA, controller manufacturer: Heidenhain iTNC 530, workpiece width (max.): 500 mm, workpiece diameter (max.): 630 mm, workpiece weight (max.): 200 kg, total height: 2,590 mm, total length: 4,780 mm, total width: 4,410 mm, overall weight: 5,900 kg, spindle speed (min.): 18,000 rpm, spindle motor power: 35,000 W, Year of construction: 2010 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 500 Y-axis travel mm: 450 Z-axis travel mm: 400 C-axis degrees: 360º (0,001) B-axis degrees: 0º/108º (0,001) Rapid traverse m/min: 80/50/50 Milling/turning table nc: Table dimensions mm: Ø390 Maximum workpiece size (D x H) mm: Ø630x500 Max. workpiece weight kg: 200 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/87 Tool system Tool holder: HSK-A 63 Tool magazine slots: 30 With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Chip-to-chip time s: 5 Equipment Chip conveyor Infrared probe Rinsing gun blowing air through spindle center selectable via M-function Signal lamp Laser tool measurement for measuring tool length and diameter Programmable coolant nozzles Heat compensator Direct measuring system XYZ Electrical cabinet active cooling unit Oil skimmer RENISHAW Measuring probe Automatic door Machine running times Under power: 54257 Bjdpfx Adjyi Dnio Djwl Spindle Working: 32498 Rated power kVA: 48 Basic machine dimensions / weight Length mm: 4780 Width mm: 4410 Height mm: 2590 Weight kg: 5900

Condition: excellent (used), Year of construction: 2020, Steady rest for WEILER E40 and E50 lathe In very good condition. Price for E40 steady rest: €2,500 Bwsdpfx Adjtx Avke Djl Price for E50 steady rest: €2,850 Clamping range: 10 – 150 mm.

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, operating hours: 10,649 h, load capacity: 7,000 kg, lifting height: 5,000 mm, free lift: 1,250 mm, load center: 700 mm, fuel type: diesel, mast type: duplex, construction height: 3,750 mm, motor manufacturer: PERKINS, fork carriage width: 1,500 mm, fork length: 1,400 mm, fork width: 200 mm, fork thickness: 70 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 10.00-20 SE, rear tire type: superelastic tires (black), rear tire size: 10.00-20 SE, overall weight: 19,400 kg, empty load weight: 12,400 kg, total height: 3,400 mm, total length: 5,000 mm, total width: 2,300 mm, color: yellow, Equipment: cabin, lighting, pallet forks, 🚜 USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS 📌 Years of experience | 🛠️ In-house service & paint shop | 💼 Professional consultancy | 🚚 Own transport | 🤝 After-sales support Looking for a forklift you can truly depend on? We are an established dealer of new and used forklifts with a longstanding tradition. We serve clients throughout Europe – from small companies to major international industrial facilities. Our forklifts are more than just machines – they are a guarantee that your logistics will operate smoothly and reliably. ⭐ What sets us apart? ✅ Every forklift undergoes a thorough technical inspection (servicing, testing, filter and oil replacement, refurbishment of main components) ✅ Full safety inspection (UDT) available on request ✅ In-house paint and service workshop – machines perfected aesthetically and technically ✅ Europe-wide transport – performed with our own fleet and trained drivers ✅ Operator training at delivery + practical on-site demonstration ✅ After-sales service & technical support – support continues after the sale ✅ Possibility to visit & test the machine at our premises – you are welcome! ✅ Hundreds of satisfied customers across Europe – join those who already trust us ✅ Financing assistance – we cooperate with most leasing companies ✅ Invoice in EUR or PLN – as per customer preference 🔹 Current Offer: BAUMANN GS 70/14/50 – 7 T Side Loader 📅 Year of manufacture: 2007 ⏱️ Operating hours: 10,649 h ⚡ Power: Diesel 🏋️ Capacity: 7,000 kg – load centre 700 mm 🗜️ Mast: Duplex – 5000 mm 🔧 Forks: 1200 mm 🛞 Superelastic tyres: 100% condition 🛠️ Technical condition: Excellent – after full service ✨ Visual condition: Well-maintained, rust-free, ready for work 📏 Free lift: 1250 mm Dimensions: 📐 Truck height: 3400 mm 📐 Total length: 5000 mm 📐 Width: 2300 mm 📐 Fork positioner width: 1500 mm 📐 Overall height: 3750 mm 🏭 Ideal applications: Warehouses with narrow aisles Bwsdpfx Adey Hldhj Djl Wood, steel, and pipe industries Handling of long goods Both indoor and outdoor operations

Condition: used, Year of construction: 2009, DMG - DMU 50 ECO - 2009 - sinumerik 810D +ShopMill - x/y/z= 500/450/400 mm - B+110°/-5° C360° Bwodpfxsy Hf Hco Ad Del - 8,000 rpm - SK40 - 12 tool positions - el. Probe DMG TS 649

Condition: used, mileage: 5,430 km, power: 130 kW (176.75 HP), fuel type: diesel, gearing type: mechanical, first registration: 07/2020, emission class: euro6, color: white, number of seats: 34, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, Subject to errors and prior sale! Internal number: 1269. 9037978 ----EQUIPMENT * School bus version with hydraulic passenger door and 8x double seats left/right (32 seats) * Foldable single passenger seat with three-point belt * Electrically adjustable and heated exterior mirrors * Three-point automatic seat belts with belt height adjustment and belt tensioner for driver * Electrical interface for external use - Electrical terminal block and preparation for function control unit * Speed limit at 100 km/h - Maximum speed limit of 100 km/h (cannot be deactivated) * Storage compartments: Glove compartment with lockable flap, illuminated * Rear wing doors with window - Rear wing doors with window cutouts - Rear window Bodpfx Adewvyflo Dswl * "Climatic" air conditioning - "Climatic" air conditioning in the driver's cab - Refrigerant R134a * Fog lights including cornering lights * Approval: Car version with more than 9 seats - M2 approval * Electrical safety package - Acoustic warning system for reverse gear engaged, dimmable * Window package - Rear wing doors with window cutouts - Side window in the passenger/loading area, front left, permanently installed - Side window in the passenger/loading area, front right, permanently installed - Side window in the passenger/loading area, rear left, permanently installed - Rear window - Side window in the passenger/loading area, rear right, permanently installed - Safety interior mirror, dimmable - Side window in the passenger/loading area, middle left, permanently installed - Side window in the passenger/loading area, middle right, permanently installed * Radio "Composition Media" with 8" touchscreen and mobile phone interface - Radio "Composition Media" with 8" touchscreen - Voice control - 1 USB interface (iPod/iPhone/iPad compatible), multimedia socket AUX-IN - Glove compartment with lockable flap, illuminated - 4 speakers: 2 tweeters, 2 woofers - Multifunction display "Plus" - Car-Net App-Connect - mobile phone interface * Protective frame (roll bar) * Seats 1st row: Comfort seat "Plus" left, in the 1st row * Socket: 12 V socket and 4 cup holders in the dashboard * Sockets: 2 12 V sockets in the driver's cab (in the dashboard) * Airbag: driver's side * Outside mirrors (left and right) convex, with integrated LED indicator and wide-angle range * Hill start assist * Brake light, third * Tachograph: Digital tachograph * Three-point automatic seat belts with belt height adjustment and belt tensioners for driver and front passenger * Electronic stabilization program and ABS * Chassis: Suspension and damping, standard * Total weight: Vehicle registered with a permissible total weight of 5.0 t * Electric windows * Driver assistance systems: "Front Assist" environment monitoring system with city emergency braking function * Gearbox: 6-speed gearbox * Weight class front axle - reinforced front axle * Floor coverings: rubber floor covering in the driver's cab * High roof, painted on the outside in the color of the vehicle * Instrument panel (km/h) displays for speed, total/daily distance, rpm, fuel level and time * Paintwork: Uni * Steering wheel adjustable in height and reach * Headlight range adjustment * Marker lights, side * Multifunction display "Plus" * Particle filter: soot particle filter for diesel including SCR and AdBlue tank * Wheels: steel wheels in silver with twin tires at the rear * Instrument panel: control panel with additional console - including 1 DIN slot and 4 additional switch positions * Hinges

Condition: used, grinding length / mm grinding width / mm workpiece height / mm Schanbacher S 3 50 Saw Blade Sharpening Machine – working condition – industrial unit For sale is a high-quality circular saw blade sharpening machine manufactured by Willy Schanbacher KG (Germany). The machine is ideal for precise sharpening of circular saw blades used in metal and woodworking industries. Technical details: Manufacturer: Willy Schanbacher KG (Esslingen, Germany) Type: S 3 50 Serial number: 93 2187 Machine type: Saw blade sharpening machine Condition: Working condition Used, with normal signs of wear Last used without issues Features: Bwsdpfx Adjy E Tyus Del Adjustable grinding angles (e.g. 90°, 120°, 140°) Precision grinding unit Feed mechanism for consistent sharpening Safety guard included Heavy-duty industrial design Applications: Metalworking Woodworking Workshops and sharpening services Scope of delivery: Machine as shown ?? Inspection possible by appointment ?? Shipping via freight forwarding available

Condition: used, diameter div. number 16x tool adaptor SK 50 Tool Package DS SK 50 Bedpfx Adowtrzte Dswl Other quantities also possible! A total of approx. 600x SK 50 holder available

Condition: like new (used), Year of construction: 2023, functionality: fully functional, DMG CMX 50 Year of manufacture: 2023 Spindle hours: approx. 1,300 h Spindle: 15,000 rpm inlineMASTER Tool holder: SK40 Tool stations: 30 slots Control: Siemens 840D sl X travel: 500 mm Y travel: 450 mm Z travel: 400 mm Weight: 4,700 kg Bwedsy Em Urspfx Ad Dol

Condition: used, Year of construction: 2003, pressure 50 t chamfer lenght 1550 mm distance between columns 1150 mm Control CYBELEC DNC 1200 PS Eco column arm 405 mm table height 900 mm stroke of ram 400 mm distance between table / ram 720 mm total power requirement 9,5 kW weight of the machine ca. 5.200 kg dimensions of the machine ca. 2000x1900x2920 mm Accessories/Equipment: - CYBELEC DNC 1200 PS Eco controller - 2 support arms - 4 stop fingers - Lasersafe - Foot switch Bjdpfey D T Tlsx Ad Dowl

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, For sale is a Cognex camera system for difficult OCR assembly verification and defect detection applications. The system never went into use and is being sold with all accessories as a set as shown in the pictures. Bsdpemx Sl Tofx Ad Dowl The model number is IS7802-373-50-LAB // 821-10035-2R and is welcome to be researched on the internet. Digital Machine Vision Camera (2Mpixel) with PatMax RedLine + Gigabit Ethernet (GigE) - Demonstrator - COGNEX (In-Sight 7000 Gen2 Series) - 7802 - 1600x1200pixels UXGA resolution (1/1.8" CMOS monochrome scanning with global shutter) - 53fps - C-mount type / S-mount type - 7. 2GB (program; non-volatile flash memory) + 512MB (SDRAM) + 8GB (SD card) - 1 x digital input (15-28Vdc / optocoupler; isolated trigger input) + 3 x digital inputs (15-28Vdc / optocoupler; isolated discrete inputs) + 4 x digital outputs (26. 4Vdc 50mA / sink/source discrete outputs) - 8-pin M12 connector (Ethernet) + 5-pin M12 connector (supply) + 12-pin M12 connector (breakout) + Micro SD card slot - supply voltage 24Vdc - with RS-232C + Ethernet + PROFINET + CC-Link + Modbus TCP communication capability - IP67 - aluminum (die-cast) housing - compatible with Patmax redline

Condition: used, Year of construction: 2014, Used machine Year of manufacture: 2014 Features and technical data: - Working area X: 3,740 mm - Working area Y: 1,570 mm - Working area Z: 350 mm - 4th axis: available - 5th axis: 5-axis spindle, 12 kW motor - with additional C-axis locking - Tool changer positions: 24 with rotary magazine; 10 in the left side of the machine stand - Vertical drilling spindles: 12 - Machine table: console table - Table positioning automation: available - 6 workpiece supports, type e-motion - Special workpiece clamping system for frames - Software: FORMAT 4 WOOD FLASH, TPA ALBATROS - 2 machining areas for pendulum operation - with automatic central lubrication - with mobile control panel with PC monitor - with air conditioning for control cabinet Bedox Hllxspfx Ad Dowl - with vacuum pump 90 m³/h - with hand-held control device - Included: 12 frame clamps, 8 large and 4 medium suction cups Availability: short-term Location: Röllbach

Condition: ready for operation (used), Year of construction: 2012, operating hours: 23,197 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 160 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 550 mm, spindle motor power: 11,000 W, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 7, This 7-axis DMG Sprint 50 2T was manufactured in 2012. It features a maximum turning diameter of 50 mm and a turning length of 550 mm. The machine is equipped with two turrets, each with 12 driven tool stations, and offers a rapid traverse speed of 30 m/min. If you are looking to get high-quality turning capabilities, consider the DMG Sprint 50 2T horizontal turning machine we have for sale. Contact us for further details. • number of cross slides 3 • main spindle yes • sub spindle yes • max turning diameter 50 mm • max turning length 550 mm • main spindle speed max 5000 rpm • sub spindle speed max 5000 rpm • main spindle power 11 kW • sub spindle power 11 kW • driven tool speed max 6000 rpm • turret speed 401 rpm • X1/X2 axis travel 160 mm • Z1/Z2 axis travel 550 mm • Y axis travel ±40 mm Bwsdpfxey Ey U Eo Ad Djl • rapid traverse speed 30 m/min • electrical connection 34 kVA • max current 135 A • tailstock force 300 daN • tailstock stroke 510 mm • tailstock connection MK3 • coolant tank capacity 980 l • coolant filter 50 µm • coolant pump pressure 20 bar • collet size 52 • max hex 43 mm • max square 35 mm • 3-jaw chuck type BBD 140/39 • optional accessories tool holders driven tools collets • spindle hours 23198 h • Optional: bar loader • loading area 500 x 630 x 1250 mm • max load 350 kg • max bar weight 40 kg • material diameter range 6 to 70 mm • square min edge 6 mm • hex range 5 to 60 mm • bar length 500 to 1200 mm • spindle liner max length 2000 mm Additional equipment • Tool holders • Driven tools • Collets Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: excellent (used), Year of construction: 2013, Airpress APK-G 50/500 Compressor Machine mounted on 500L tank, serviced and equipped with air dryer. Technical specifications: Capacity: 1.9 m3/min (1900/min) Motor power: 15 KW Pressure: 10 bar Operating hours: 4427 h Year: 2013 Bwedpfjy Idlyjx Ad Djl Net price: 13,700 Gross price: 16,851 The compressor is fully functional, service support provided. Video below