Used Nossen Section Steel Shear for sale (20,302)

Condition: excellent (used), We have 140 heavy duty stainless steel cooking racks available. Can be used for cooling or defrosting. Dimensions 1000mm x 800mm wire trays on 1200mm heavy duty frames. 7 shelves on each one. Itsdpezi Em Sjfx Anijn

Condition: good (used), Year of construction: 1987, machine/vehicle number: A20072, Offer 26300 Technical data: - max. working width 3050 mm - max. cutting capacity St 40 12 mm - Cutting angle adjustable, motorized 0.5 - 3° - Manual cutting gap adjustment - Number of hydraulic clamping bars 18 pcs - Motorized rear stop 10 - 1000 mm - Front angle stop - Number of strokes per minute, depending on cutting angle and cutting length 7 - 17 - Hydraulic drive 400 V / 22.5 kW - Table height 770 mm - Space requirement approx. W 4100 x H 2030 x D 2030 mm - Weight approx. 8500 kg - Includes: - Foot switch Itedpfx Ajzw Dt Hsnijn - Cutting line illumination

Condition: used, Used Babcock Gardner Type 100L 316 stainless steel ribbon blender. Approximate 100 litre working capacity. Mixing trough approximately 350mm wide x 500mm deep x 1000mm long. Single interrupted ribbon direct driven by a 1.5 kw 415 volt 3/50 1420 rpm motor through a David Brown GHT 2 gearbox with a ratio of 20.34/1 and an output RPM of 71.3. Specifications: Capacity: 100 L Construction Material: Stainless Steel Horsepower: 1.5 kW Ijdpszfh U Djfx Anistn Jacket: No

Condition: used, Bag filter housing – 3 size #2 bags – stainless steel 304 Number of bags 3 Bag size #2 Material Stainless steel 304 Housing dimension D (mm) 450 ±3 Height H (mm) 1800 +3/−1 Max. working pressure (bar) 6 Design pressure (bar) 8 Max. working temperature (°C) 80 Inlet/outlet TC50 Tri-Clamp Isdpfxjz N Tafs Aniotn Seal Viton Surface Sandblasted Data source Individual drawing Dimensions and operating limits follow the assigned technical drawing. The offered material is stainless steel 304; the drawing also applies geometrically where its title block specifies a different material.

Condition: new, Shaft diameter: 120roll diameter: 390motor power: 15length: 2000width: 1650heigth: 1900weight approx.: 4450 Standard Equipment • Steel construction frame • 3 rolls powered by hydromotor and planetary gearbox • Horizontal and vertical working position • Mobile control panel • Hardened standard rolls • Hardened and ground shafts made of high-tensile special steel • Digital read-outs (2 pcs) • 3-axis hydraulic lateral angle guide rolls • Two-speed working system • Hydraulic elements: Duplomatic (Italy) components used • Electrical equipment: Siemens (Germany) or Telemecanique (France) • Built according to EC safety directives (CE mark) and ISO 9000 certificate • User’s manual in English Options: - NC Unit 7 Screen EURO 7.500,-- Isdpoy Hymqjfx Anietn Capacity Chart: NoProfile TypeSize Max Min. Dia.Notes1125x25 1200 Standard Rolls2200x50 1000 Standard Rolls365x65 750 Standard Rolls4Ø80 850 Optional Rolls5Ø5”x6,35 1500 Optional Rolls6Ø160x4 2800 Optional Rolls7120x40x4 1800 Optional Rolls890x5 1800 Optional Rolls9120x120x12 1200 Optional Rolls 10100x100x10 1200 Optional Rolls 11100x11 800 Standard Rolls12100x11 1000 Standard Rolls13100x11 800 Optional Rolls14UPN 220 1000Standard Rolls*15UPN 220 1200 Standard Rolls*16IPN 220 1000 Standard Rolls *17HEB 120HEA 14012001200Standard Rolls *18UPN 120 10000 Optional Rolls 19IPN 160 5000 Optional Rolls 20HEB 100HEA 12016004000Optional Rolls

Condition: used, This listing is for a Clearmark ICE Viper plus Thermal Inkjet Coder with Stainless Steel Conveyor Itjdpfx Anoxzg Hwsion

Condition: new, sheet width 3100 mm plate thickness 13,0 mm thickness at "Niro-steel" 8,0 mm down holder 14 Stück no. of strokes 11 Hub/min oil volume 310 ltr. cutting angle 2,0 ° throat 350 mm table height 900 mm total power requirement 22,0 kW weight of the machine ca. 12200 kg range L-W-H ca. 4100 x 2300 x 2235 mm ----- heavy electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment ----- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German Itodsxaa U Sspfx Anion

Condition: new, sheet width 3100 mm plate thickness 10,0 mm thickness at "Niro-steel" 6,0 mm down holder 14 Stück no. of strokes 13 Hub/min oil volume 260 ltr. cutting angle 2,0 ° throat 350 mm engine output 22,0 kW back stop - adjustable 1.000 mm weight 10.575 kg. range L-W-H 4,05 x 2,5 x 2,17 m ----- heavy electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment ----- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Quantity Isdpfx Anoxabdbjistn * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball rollers in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German

Condition: new, sheet width 3100 mm plate thickness 6,0 mm thickness at "Niro-steel" 4,0 mm distance between columns 3100 mm down holder 14 Stück no. of strokes 18 Hub/min oil volume 150 ltr. cutting angle 1,2 ° control CYBELEC CybTouch total power requirement 11,0 kW weight 6300 kg range L-W-H 4.000 x 2.100 x 1.640 mm ----- electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment ----- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity Iodpfx Aexabzgonijtn - User manual: machine and control in German including special equipment: - pneumatic sheet metal holding device (monoblock)

Condition: used, Year of construction: 2022, sheet width 3100 mm plate thickness 10.0 mm thickness at "Niro-steel" 6.0 mm down holder 14 Stück no. of strokes 13 Hub/min cutting angle 2.0 ° throat 350 mm back stop - adjustable 1000 (+) mm oil volume 260 ltr. engine output 22.0 kW weight 10.575 kg range L-W-H 4100 x 2400 x 2170 mm Isdpfxsxab I Hj Anietn Demonstration/demo machine (!!) from our exhibition (like NEW) with very few operating hours ----- heavy electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment ----- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball rollers in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - Light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German including special equipment: - pneumatic sheet metal holding device

Condition: used, Year of construction: 1985, sheet width 3100 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.5 mm cutting angle adjustment 1.0 ° back stop - adjustable 10 - 1000 mm adjustment speed 180 mm/s down holder 21 Stück strokes per minute 18 - 31 oil volume 160 L Control ELGO P8511 column arm 200 mm distance between columns 3050 mm 0 max. 300 bar voltage 400 V main drive 9.0 kW weight of the machine ca. 4800 kg. dimensions of the machine ca. 3660 x 2070 x 2140 mm Isdpfxoxab Tvj Anistn from a maintenance workshop Equipment: - electro-hydraulic sheet metal shear "swing cut" - machine frame = all-steel welded construction - ELGO NC control model P8511, control panel at the front left * for positioning the electro-motoric rear stop * target/actual position value input possible * adjustment by three-phase motor via toothed belt - support table with ball rollers * there are recessed grips between the table plates - front finger guard - hydraulically acting sheet metal hold-down device - 1x freely movable foot switch - emergency stop button at the front - movable scrap switch - original operating instructions + circuit diagram Special accessories included: - EHT pneumatic sheet metal holding device for thin sheet metal cuts - 1x EHT extra long side stop 3.000 mm with mm scale & support foot - 1x EHT extra long support arm with 3.000 mm with scale & Support foot - EHT additional support arms with mm scale

Condition: used, Year of construction: 1999, sheet width 3060 mm Iedpfoxaci Esx Anietn plate thickness 8.0 mm thickness at "Niro-steel" 6.0 mm distance between columns 3100 mm down holder 16 Stück no. of strokes max. 10 - 15 Hub/min oil volume 160 ltr. cutting angle 1.6 ° back stop - adjustable 6.0 - 750 mm Control ELGO P9521 total power requirement 18.5 kW weight 6300 kg range L-W-H 3900 x 2300 x 1630 mm Features: - Robust electro-hydraulic swing beam shear - ELGO digital display model P9521, for electric backgauge * Backgauge travel X = 750 mm * Backgauge-free ball screw drive * Travel speed 100 mm/s - 1x stable side stop * With T-slot, flip-stop, and millimeter scale - 2x stable front support arms - Electric cutting length limiter * Cutting length limiter to increase the stroke rate/min. - Manual cutting gap adjustment * Centrally operated on the right side stand - Front support plates - Front finger/interference guard - Inching operation with push buttons on the left control panel - Protective grille = safety device behind the machine - Operating instructions (PDF)

Condition: used, functionality: fully functional, Year of construction: 1995, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 14 mm, Equipment: safety light barrier, Hydraulic Shear Brand: Casanova Model: VC-26 Year: 1995 Isdpfxjwy Nhqs Anistn Power: 30KW New WEINTEK control installed in 2020. Cutting length: 3100mm Maximum cutting thickness (steel): 20mm Maximum cutting thickness (stainless): 14mm Throat: 500mm Cuts per minute: 8-18 Backgauge: 1,000mm Manual blade gap adjustment via side levers. Front safety laser.

Condition: used, 2012 De Gouwe Jacketed Stainless Steel Buffer Tank Itsdjwq Slaspfx Anien Jacketed Stainless Steel Year 2012 With ancillary equipment

Condition: new, Year of construction: 2025, neu 2025 090132 prompt, Zwischenverkauf v Türkei 47500 € 798.38 € 1 41800 € 3100 mm 6 mm 4 mm 50 mm 15 1/min 1.5 ° 16 14 to 1000 mm 200 mm/s 15 kW 200 l 2 Stk. 865 mm 500 mm 3515 mm 4110 mm 2200 mm 3700 mm 2100 mm 7300 kg Swing cut construction NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port Motorized back gauge 1000 mm on ball screws, folding upwards Itsdpfswiqyyjx Anijn Clear control panel mounted on moveablearm Hydraulic hold down pistons are arrangedclose to the cutting edge Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Piece counter Single and continous stoke Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Simple replacement and grinding of theblades Variable adjustable cuttinglength for economic processing Lower blade fourfold turnable Upper blade double turnable Oilfilling Light barrier on the back of the machine Qualified customer support User manual in GERMAN and ENGLISH according to CE rules

Condition: new, Year of construction: 2026, neu 2026 090187 prompt, Zwischenverkauf v Türkei 14400 € 276.48 € 1 1350 mm 3 mm 35 1/min 550 mm 3 kW 2 Stk. 850 mm 400 mm 1900 mm 1350 mm Iedpfx Anowiq Epoiotn 1260 mm 1060 kg manualback gauge automatic sheet hold down hold down with rubber pads moveable foot switch side lay 2 supporting arms light barriers on the back of the machine user manual in GERMAN and ENGLISH

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 29200 € 557.72 € 3200 mm 2 mm 1.2 mm 3650 mm 1700 mm 1300 mm 3100 kg NC-controlled backgauge 750 mm ELGO P40T touchscreen Rear light barrier protection Front finger guard cover Extendable front support bracket Cutting line illumination Equipment compliant with CE directives Operating instructions in German or English OPTIONS: Sheet support, front or rear unloading € 1.900,00 Sheet support, front andrear unloading(NC controlled) € 2.840,00 (gauging length decreases approx. 200 mm) 1000 mm servo-backgauge Itedpfjwiq Ikox Anisn € 900,00 Side gauge extension to 2 m € 410,00 Sheet metal carriage with rollers (capacity 1,000 kg) € 1.040,00 Angle stop € 460,00

Condition: new, Year of construction: 2025, neu 2025 090131 prompt, Zwischenverkauf v Türkei 4700 € 109.71 € 1 50 mm 155 mm 2 1.5 kW 4,5 m/min 60x10 mm / 500 mm; 40x10 100x15 mm / 450 mm; 60 x 35x35 mm / 900 mm; 20x20 Ø 35 mm / 600 mm; Ø 30 mm Ø 70x2 mm / 1.000 mm; Ø 3 70x30x2 mm / 1.200 mm; 50 50x50x3 mm / 1.700 mm; 40 50x50x5 mm / 800 mm; 40x4 50x50x6 mm / 1.000 mm; 30 1050 mm 750 mm 1450 mm 390 kg 2 mech. driven rolls strong cast steel construction shafts made of special steel,hardened and ground top roll manual adjustable Iodswiq S Aopfx Aniotn hardened universal rolls lateral rolls adjustable in 1 axis horizontal and vertical operation double foot pedal forfor- and backward drive machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH WE HAVE MORE THAN 210 REFERENCES!

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei Iodpfx Aewirynonietn 94900 € 1793.61 € 4100 mm 13 mm 8 mm 350 mm 8 1/min 1.75 ° 18 62 to 1000 mm 200 mm/s 30 kW 330 l 3 Stk. 818 mm 550 mm 4520 mm 5350 mm 2250 mm 3650 mm 2250 mm 16300 kg Swing cut construction NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port Motorized back gauge 1000 mm on ball screws, folding upwards Clear control panel mounted on moveablearm Hydraulic hold down pistons are arrangedclose to the cutting edge Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Piece counter Single and continous stoke Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Simple replacement and grinding of theblades Variable adjustable cuttinglength for economic processing Lower blade fourfold turnable Upper blade double turnable Oilfilling Light barrier on the back of the machine Qualified customer support User manual in GERMAN and ENGLISH according to CE rules (sample photo) WE HAVE MORE THAN 850 REFERENCES!

Condition: like new (used), functionality: fully functional, CMU Shear Itedoy R Diwopfx Anijn 3000 x 8/10 Model 2E0 6/30 Motorized Backgauge Blade Angle Adjustment Used Machine Internal Code: SER 63

Condition: as good as new (ex-display), Year of construction: 2021, L-beam 40 x 5.0 (d 500) mm I - beam section - flat steel 80 x 15 (d 700) mm I-beam section - upend 50 x 10 (d 800) mm Iodpfx Anexcukajijtn round material 30.0 (d 700) mm bar material dia. max. 60 x 2 (d 1200) mm square material 50 x 30 x 3 mm range L-W-H 670 x 530 x 1350 mm weight 185 kg total power requirement 0.75 kW Exhibition machine from 2021 with only approx. 2x operating hours Condition as NEW Special price on request Equipment: - robust electro-motorized ring/profile bending machine - horizontal and vertical work possible * Machine head can be folded 90° - 1x freely movable foot switch - segmented standard rollers (divided) - 2x motor-driven rollers - manual delivery of the top roller - analog position display of the top rollers (scale) - manually adjustable side/straightening rollers - CE mark / declaration of conformity - Operating instructions in German

Condition: new, I-beam section - upend 100 x 20 (d 2100) mm bar material dia. max. 100 x 3 (d 3000) mm L-beam 80x80x8 (d 2000) mm square material 50 x 25 x 2 (d 600) mm I - beam section - flat steel 120 x 30 (d 600) max.140b mm bar material - diameter 60.0 (d 1000) mm tool taper 80.0 mm bending speed 4.2 m/min Control konv. oil volume 100 Liter weight 1600 kg range L-W-H 1240 x 1375 x 1540 mm Equipment: - electro-hydraulic ring/profile bending machine - hydraulic bottom/side roller adjustment * for extra small bending radii - bottom/side roller can be adjusted individually - 3x driven rollers - divided roller segments - digital position display of the bottom/side rollers * Display with touchscreen function Itsdpexcukgsfx Anijn - hardened tool holder (42CrMo4) - machine base - 2x hydraulically adjustable side guides - horizontal and vertical work possible - freely movable control panel - pressure gauge / pressure display for the rollers - CE mark / declaration of conformity - operating instructions in German

Condition: used, functionality: fully functional, Year of construction: 2000, Equipment: CE marking, angle stop, emergency stop, finger protection, foot remote control, safety light barrier, Hydraulic Shear Brand: DURMA Type: DHGM3020 Sheet Length: 3000 mm Steel Thickness 37: 20 mm Voltage: 3x380V-50 Hz Length: 4450 mm Width: 3850 mm Height: 2450 mm Itsdpjxn Rhrjfx Anion Weight: 20,000 kg

Condition: good (used), 4 pieces of circular shear exchange frames including stands and tools (circular blades + stripper rings and spacer rings) Shaft diameter: 140 mm Band width: 1600 mm Price: 10,000.00 EUR / unit Itedpjw Uqr Ssfx Anien

Condition: good (used), 2 sets of circular knife shear exchange frames with stands and tools. (Circular knives + ejector rings and spacer rings) Shaft diameter: 220 mm Band width: 1600 mm Price: 10,000.00 EUR / each Itedpsw Uqu Hjfx Anisn