Used Pfannenberg Ds5-Tas-Sil for sale (1,312)

Condition: used, Year of construction: 2019, pressing force: 100 t, pressure:100 t stroke:1000 mm table surface area:1045 x 1045 mm table extendable:800 mm table speed:50 mm/sec dimensions:ca. 2550 x 2850 x 3620 mm height over floor:600 mm Hnsdpfoffamxex Ai Dol diameter of piston:76 mm ram diameter:110 mm ram hole:40 H7 Cylinder:300 mm total power requirement:5,5 kW pump capacity:24,9 Lt./min Pressure power:250 bar :200 l daylight opening:1600 mm daylight:1200 mm weight of the machine ca.:6,6 t hollow:180 mm hollow:400 mm :1000 kg :1 - 10 mm/sec work stroke:3 mm/sec :1 - 25 mm/sec :33 mm/sec

Condition: used, axle configuration: 3 axles, first registration: 02/2013, suspension: air, tire size: 385/65/22.5, color: other, Year of construction: 2013, Equipment: ABS, = Additional options and equipment = - Air suspension = Further information = Axle configuration Tyre size: 385/65/22.5 Axle brand: SAF Brakes: Disc brakes Suspension: Air suspension Rear axle 1: alloy rims Rear axle 2: alloy rims Rear axle 3: alloy rims Weights Unladen weight: 5,530 kg Payload: 33,470 kg Gross vehicle weight: 39,000 kg Maintenance, history and condition APK (roadworthiness test): valid until 10/2026 Damages: none Hedpfxjyxf Ide Ai Donl Identification Registration number: QALH523

Condition: new, Year of construction: 2025, machine/vehicle number: MOT01-300, coil inner diameter: 250 mm, coil outer diameter: 1,450 mm, coil weight: 1,000 kg, coil width: 300 mm, product width (max.): 300 mm, overall weight: 300 kg, load capacity: 1,000 kg, spreading range: 250 mm, Automatic coiler or decoiler Remote control console - wireless Automatic and manual working mode Speed fine tuning potentiometer Danfoss inverter Synchronized easily with punching line Hjdpfx Aisb H R Ayj Djnl Ideal for stamping automatic lines Coiler motorized Central expansion Run both directions, forward and reverse Loop sensors control Speed from 0.1 RPM to 28 rpm Motor with gear reducers Capacity max. load 1 ton Strip width up to 300 mm Inner diameter min 250 mm max. 520 mm Outer diameter max. 1450 mm Power 0.75 KW Dimension 1.200 mm x 1.200 mm height 1.600 mm Weight cca. 300 kg with CE certificate On stock also high speed presses Schaal, Mabu and Bruderer presses as well bas band saw blade welders

Condition: new, number of rollers: 3, roller (bottom) diameter: 95 mm, roller (top) diameter: 95 mm, side roll diameter: 95 mm, roller length: 2,070 mm, number of digital displays: 1, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, swiveling upper roller, - Capacity 2070 x 1.5 mm Hnodpfxjvkkkij Ai Djl - Electrically adjustable rear roller - Digital display - Hardened rollers - Conical roller - Swiveling top roller - Brake motor - Foot control - Emergency stop - Documentation - 400V

Condition: new, Year of construction: 2025, roller (bottom) diameter: 95 mm, roller (top) diameter: 95 mm, side roll diameter: 95 mm, roller length: 1,070 mm, sheet thickness steel (max.): 3 mm, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, swiveling upper roller, - Capacity 1070 x 3 mm - Conical rollers - Pivoting top roller - Foot pedal control - Brake motor - Emergency stop - Documentation Hnodpfxowhgm To Ai Del - 400V

Condition: new, Year of construction: 2025, number of rollers: 3, roller (bottom) diameter: 130 mm, roller (top) diameter: 130 mm, side roll diameter: 130 mm, roller length: 1,070 mm, sheet thickness steel (max.): 5 mm, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, swiveling upper roller, - Capacity 1070 x 5 - Electrically adjustable rear roller - Digital display for the movement of the rear roller - Hardened rollers - Conical rolling Hedpfx Aisirwlaj Djnl - Rotating top roller - Brake motor - Foot control - Emergency stop - documentation - 400V

Year of construction: 2005, condition: used, SAMPUTENSILI - S200 - 2005 - used condition as shown on photos - under power, can be tested - more photos available Hnedpfx Asyl Srzei Djl

Year of construction: 2024, condition: used, STRATASYS - F190 - 2024 - including a 3D printer, a filament washer, and in addition, a filament dryer, a filament vacuum cleaner, and a PC - for materials ABS-M30, ASA, FDM® TPU 92A, ABS-CF10, FDM® Nylon-CF10 - Layer height 0.127/0.178/0.254/0.330 mm Hnedpfxeyl Sn Ns Ai Dsl - Building space 305 × 254 × 305 mm - Material tanks total 2 – 1 for build/1 for support - Support material QSR – fully soluble support material - Printing accuracy +/- 0.2 mm for the entire part or +/- 0.002 mm/mm - Network connectivity Wired: TCP/IP Wireless: IEEE 802.11n, g or b - Dimensions and weight 1626 × 864 × 711 mm; 227 Kg - Operating conditions Air temperature 15-30 ° C, relative humidity 30-70% (non-condensing) - Requirements for connection to the el. mains 100–132 V / 15 A VAC, 50–60 Hz 200–240 V / 7A, 50-60 Hz Complies with CE (Low Voltage and EMC Directive - European Parliament and Council 2014/35/EU), FCC, EAC, cTUVus, FCC, KC, RoHs, WEEE, Reach, RCM - The device includes: 1x F190CR Start up Kit (123-00100) 1x Bases - F120/F170 Standard Modeling Bases (Pack of 16) (123-00302-S) 1x Printhead for ABS/ASA (123-00401-S) 1x print head for QSR Support ( 123-00401-S ) 1x ABS model material (988cm3) 1x QSR Support material (988cm3)

Condition: new, Ostas ORM 1570x140 Premium - 3-roller sheet curling machine with top equipment Additional equipment included - Motorized rear roller - Digital display for rear roller Hjdpfeuzhy Tox Ai Donl - Hardened rollers Standard equipment - Cast steel main frame - quality-certified SAE 1050 steel rollers - top and bottom rollers with individual gears - conical bending device - Wire grooves at the end of the rollers - mobile control panel - Compliance with CE standards - user manual Technical data - Bending length: 1570 mm - Bending capacity: 4 mm - Roller Ø: 140 mm - Roller speed: 3.5 m/min - Motor power: 2.2 kW - Dimensions WxHxD: 2725 x 1100 x 800 mm - Weight: 1450 kg

Condition: used, machine/vehicle number: YA6SA339K500R0233, axle configuration: 3 axles, first registration: 02/2005, suspension: air, tire size: 385/65, tire condition: 40 %, color: other, Year of construction: 2005, Equipment: ABS, = Additional options and accessories = - Air Suspension - Disc brakes = More information = Hedpfx Aijywkrxj Donl Tyre size: 385/65 Make axles: Mercedes Brakes: disc brakes Suspension: air suspension Rear axle 1: Tyre profile: 40% Rear axle 2: Tyre profile: 30% Rear axle 3: Tyre profile: 30%

Condition: new, Year of construction: 2026, number of rollers: 3, roller (bottom) diameter: 110 mm, roller (top) diameter: 110 mm, side roll diameter: 110 mm, roller length: 1,070 mm, sheet thickness steel (max.): 4 mm, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, swiveling upper roller, – Capacity 1070 x 4 mm – Electrically adjustable rear roll – Digital display for rear roll movement – Hardened rolls – Conical rolling – Swing-out upper roll Hnedpfx Aeyv R T Tsi Dsl – Brake motor – Emergency stop – Documentation – 400V

Condition: new, Year of construction: 2026, number of rollers: 3, roller (bottom) diameter: 110 mm, roller (top) diameter: 110 mm, side roll diameter: 110 mm, roller diameter: 110 mm, roller length: 1,270 mm, sheet thickness steel (max.): 4 mm, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, swiveling upper roller, – Capacity 1270 x 4 mm – Electrically adjustable rear roll – Digital display for rear roll movement Hnsdpfx Aijyv R Taj Djl – Hardened rolls – Conical rolling – Swing-out upper roll – Brake motor – Emergency stop – Documentation – 400V

Year of construction: 1996, condition: used, functionality: unexamined, machine/vehicle number: 2566, Marsilli coil winding machine with 6 spindles, No. 437 Hodpfxoyuthio Ai Denl Type WM 2002/6 - 100, serial no. 2566

Condition: used, maximum load weight: 32,246 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 04/2025, next inspection (TÜV): 04/2026, loading space length: 13,110 mm, loading space width: 2,400 mm, loading space height: 2,650 mm, loading space volume: 86 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2025, Equipment: ABS, STAS 3-Axle Hardox Steel Tipper 86 m³ First Registration 04/2025 Hnjdpfeygdvhsx Ai Del Internal Dimensions (LxWxH): 13,110 x 2,350 / 2,450 x 2,770 mm (tapered design) Unladen weight: 9,640 kg Floor made entirely of 5 mm Hardox steel HB450 Front and side walls made of 3 mm Hardox steel HB450 Pneumatically folding rear underrun protection Straight front wall, with interior access ladder Rear portal doors 50:50 with pneumatic sequential unlocking Reinforced roof tarpaulin HYVA tipping cylinder, Alpha type, low pressure 2x pneumatic vibrators JOST crank landing gears, full load SAF axles with large 430 mm disc brakes 1st axle: LIFT AXLE WABCO Trailer EBS with RSS roll stability control WABCO Smartboard Lifting and lowering device Automatic tipping lowering function Tyres: 6 x 385/55 R 22.5 ALCOA Dura-Bright high-gloss aluminium rims Aluminium access ladder Shovel and broom holder Left side toolbox 4x LED reversing lights RENTING is the new BUYING – also available immediately with full-service rental.

Condition: used, Ersatzmesser für Schneidmaschinen - Spare Knife for GuillotinesPolar - Wohlenberg - Perfecta - Schneider Senator 72 - 80 - 92 - 115 - 137 - 155 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Hsdpfx Aieh Ax Sco Denl On Stock Emskirchen / Nürnberg - Can be test

Condition: new, Year of construction: 2019, machine/vehicle number: DF0303, pressing force: 160 t, table length: 550 mm, table width: 500 mm, working height: 700 mm, pressure:160 t distance between columns:700 mm stroke:400 mm Hnsdpfx Aisfxyh Re Djl Return Capacity:16 t Engine Output:15 kW Travel:400 mm :600 mm Ram plate:700 x 600 mm table height over floor:850 mm Table size:700 x 600 mm speed of forward flow:10 mm/sec Pressing speed:10 mm/sec :10 mm/sec Oil cooling (electric):1,5 kW (max) Oil Tank Capacity:300 l weight of the machine ca.:4,2 t dimensions:950 x 2440 x 2400 m ejector:30 x 30 mm ejector stroke:150 mm pressure of ejector:15 t ejector speed:25 mm/sec no. of ejector pins:1 Stück heating plates :550 x 500 mm :6800 ? :2400 ? :1200 ? :1200 ?

Condition: as good as new (ex-display), Year of construction: 2023, pressing force: 120 t, table length: 600 mm, table width: 600 mm, Here are the technical data of the offered machine: Technical data + information: HB 2021-A-188, oil hydraulic double column press 120 T bottom piston heating press. - idle speed up to 40 mm/sec - Opening speed up to 40 mm/sec - Starting press speed 5-15 mm/sec - Table size/heating plate size 600 × 600 mm - ram size/heating plate size 600 × 600 mm - 2 heating plates, electrically heated, up to 250 degrees - as OPTION - total size approx. 2000 × 1000 × 2800 mm height - Oil temperature control - Automatic lubrication - Free positioning of the ram - SICK/LEUTZE light barriers 14,1 mm on front side - Circuit oil cooling - Pressure holding valve 0 to 1800 sec. - Rear monitored door - Pressure adjustment from 30 T to 120 T - Travel limitation either by pressure or position - Programming set-up mode, single stroke (adjustable via rotary switch) - Control panel permanently installed in cabinet wall - Two-hand operation - Machine body double painted - Signal light: red: alarm, yellow baking phase, green: ready - Heating plates with electric heating rods, up to max. 250 degrees - Assembly, commissioning, instruction against separate charge Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 1,600 kN Free ripping force max. 200 kN Pressure build-up time closed die steel to steel Max. 8 sec. Dimensions Max. Opening width per compartment 200 mm Stroke and min. opening per compartment 400/200 mm Table height above floor, without heating pl. 850 mm Height above floor (overall height) approx. 2.800 mm Hall height min. 3,500 mm Parallel deviation at 20 °C +/- 0.1 mm Deflection Determined at max. clamping force with 70 % occupancy ≤ 0.2 mm/m Total weight of the press without operating materials approx. 9 to Accessories: 4 HEATING PLATES 500 × 400 mm, max. heating capacity Equipped with temperature sensor 300 degrees Speeds Fast closing with 15 mm sec. Hedjk S Dt Tjpfx Ai Donl Pressing speed 10 mm sec. Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3 max. 8 db(A) Number of pressing cylinders 1 pc. Operating pressure max. 240 bar Pressing pressure build-up time 4 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH gear pump approx. 48 L/min Oil volume approx. HLP 46 MW 300 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Automatic pressure readjustment after 5 % pressure loss Pressure stabilization for up to 1800 sec. Electrical system Main supply 400 V AC Control voltage Hydraulic pumps 24 V DC 24 V DC Frequency 50 Hz Connection hydraulic main motor 15 kW Total connection approx. without heating plates 19 kW ##### If the press does not exactly meet your requirements, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Our great strength is special machine construction and press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: new, functionality: fully functional, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO produce Cement Silos from 50 to 2000 tons for stocking various tonnages of cement. Silos can be produced as welded or bolted according to your preference. For the continuation of production in a seamless way, FABO provide required units to get more than basic Cement Silo; level gauge, pressure relief valve and these kind of equipment. CEMENT SILO: Capacity: 50-2000 TONS (BOLTED) Silo Filters: 24,5 m2 surface area (WAM Brand) Silo Safety Valve : - (WAM Brand) Level Indicators 2 pcs/Silo, Brand: WAM, Model: ILTC220, Fludifier Nozzle : 3 pcs/silo, Brand:WAM, Model: U025 Mechanical Valve and Arm : (WAM Brand) Silo charging pipe : Ø 114 mm steel pipe. Hjdpfx Aiswfckio Djnl FOR FURTHER INFORMATION, PLEASE FEEL FREE TO CALL US!!!

Condition: new, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO produce Cement Silos from 50 to 2000 tons for stocking various tonnages of cement. Silos can be produced as welded or bolted according to your preference. For the continuation of production in a seamless way, FABO provide required units to get more than basic Cement Silo; level gauge, pressure relief valve and these kind of equipment. CEMENT SILO: Capacity: 50-2000 TONS (BOLTED) Hodpfxsv Uxaao Ai Dsnl Silo Filters: 24,5 m2 surface area (WAM Brand) Silo Safety Valve : - (WAM Brand) Level Indicators 2 pcs/Silo, Brand: WAM, Model: ILTC220, Fludifier Nozzle : 3 pcs/silo, Brand:WAM, Model: U025 Mechanical Valve and Arm : (WAM Brand) Silo charging pipe : Ø 114 mm steel pipe. FOR FURTHER INFORMATION, PLEASE FEEL FREE TO CALL US!!!

Condition: new, axle configuration: 3 axles, loading space length: 10,636 mm, loading space width: 2,480 mm, loading space height: 2,300 mm, loading space volume: 60 m³, Chassis manufactured in self-supporting ALU (aluminum) construction with corresponding reinforcements in the lower flange for particularly high stability and strength, aggregate chassis made of ALUMINUM, 140 mm frame height! (max. 39 tons) Axles and Suspension "Disc Brake 22.5": Jost axle assemblies 3 x 9 tons with DC air suspension, lifting and lowering function, Wabco Smartboard, electronic brake lining wear indicator (BVA) for display in the tractor unit (without tractor head equipment), 1st and 3rd axle separately liftable with drive-off aid (without tractor head equipment), 3rd axle additionally with Optiturn, ECAS air suspension, tire pressure monitoring Wabco Trailerpulse with ZF rim-mounted sensors Tires and Wheels: 6 wheels with tires size 385/65 R 22.5, brand as per manufacturer’s choice, Alcoa aluminum rims DuraBright 11.75x22.5 ET 120, king pin bolted into a 10 mm thick plate Landing Legs: Aluminum drop landing legs, 2 x 10 tons support load, pivot feet used for air suspension Brake System: According to E.G. standard, dual-circuit brake system, EBS E-system Wabco with RSS system (Roll Stability Support), spring-actuated parking brake active on two axles, operated at the rear, aluminum air reservoir system, premium modulator Electrical System: According to STVZO guidelines, with 2 LED five-chamber taillights type Aspöck Europoint LED integrated in ALU rear end, 24 V system with 1x 5-pin & 2x 7-pin sockets, with LED side marker lights, 2 separate LED work lights at the rear, 2 LED work lights at 1st landing leg height, 1 inside left front LED work light, operable from outside Body/Bodywork "Fully Welded Inside Construction": Front wall load 17,250 dkn, rear and side walls 10,250/13,400 dkn aluminum body, side walls 30 mm thick ALU plank profiles (2-3 mm) 600 mm wide, fully welded with lower and upper flange, inside fully welded plank profiles, floor as moving floor system on 140 mm ALU crossbeams, floor load approx. 7 t/m2, crossbeams closely spaced (approx. 350 mm), ALU front wall with 600 mm plank profile 2-3 mm thick in straight design, special angled ALU corner profiles, smooth flat rear wall with 2 ALU swing doors 50/30 mm thick, 4 locking rods with welded-in ALU rear frame mounted in Teflon and stainless steel bearings, continuous ALU wall suspended from reinforced ALU top rail with "Kevlar tarpaulin" for complete emptying, lateral brush seals and additional Kevlar side tarpaulin, integrated discharge funnel with hinged floor closure flap, operable from outside left rear, inspection window rear left, 1 sample slide per rear door (2 pcs.), service door front left Hydraulic System: "Cargo Floor moving floor system in the floor with hydraulically operated ALU profiles on ALU square profiles with approx. 670 PE-HD sliding blocks, approx. 6 mm floor thickness, hydraulic stroke approx. 200 mm, fixed end at front wall, separate hydraulic line connection under the vehicle with fixed halves, line size NW 21, fixed halves with yet to be specified size and design, operating pressure 190 max. 240 bar, aluminum end pieces welded into the floor, electric operation rear left with cable remote in lockable waterproof box Accessories: PVC mudguards with rubber splash guards, ALU spare wheel holder, foldable side ALU underrun protection, 1 toolbox approx. 800x460x430 mm plastic, approx. 3.7 m ALU ladder, roll tarp 680 gr./m2 quality with rolling tarp system incl. side ... Hsdpofakkcjfx Ai Donl

Condition: used, Year of construction: 2018, operating hours: 100 h, call (Contact · Phone · Mobile · WhatsApp) Epsilon FG 40 log grapple Hedextd E Uopfx Ai Dsnl * Year of manufacture: approx. 2018 * Net price * All information without guarantee

Year of construction: 2008, condition: ready for operation (used), With the tools shown in the pictures, metal and plastic parts for garden tools can be manufactured (garden scythe, sickle, leaf rake, hoe, shovel, rake, balcony set, soil cultivator, etc.). The total weight of the manufacturing tools (75 pcs) is approximately 11,000 kg. Hnsdpfx Aioymyh Ho Dol

Condition: excellent (used), Year of construction: 2004, TECHNICAL SPECIFICATIONS Model: ROSILIO C 450 Numerical control – CNC unit – FAGOR 8055 CNC control Table dimensions: 770 x 300 mm Travel: X: 450 mm, Y: 400 mm, Z: 450 mm Taper: BT 40 Hjdpoyl Ng Asfx Ai Denl Power: 7.5 kW Spindle speed: 8,000 rpm Machine dimensions: 1900 x 1600 x 2150 mm Weight: 2,900 kg

Condition: used, axle configuration: 3 axles, first registration: 04/2003, loading space volume: 60 m³, suspension: air, tire size: 385/65R22,5, wheelbase: 1,300 mm, Year of construction: 2003, Tyre size: 385/65R22,5 Suspension: air suspension Drive: Wheel Empty weight: 7.010 kg Hodpfx Aeuc Ax Dji Djnl Carrying capacity: 26.990 kg GVW: 34.000 kg Make of bodywork: SPITZER Number of compartments: 7

Condition: new, Year of construction: 2026, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 220 mm, roller (top) diameter: 220 mm, side roll diameter: 180 mm, roller diameter: 220 mm, roller length: 2,070 mm, sheet thickness steel (max.): 10 mm, overall weight: 4,900 kg, total length: 4,050 mm, total width: 1,550 mm, total height: 1,470 mm, input voltage: 400 V, number of digital displays: 3, Equipment: centralized greasing system, cone bending device, documentation/manual, emergency stop, hardened rollers, - 4 rolls - Capacity 2070 x 10 - Bending capacity 2070 x 8 - Hardened rollers - Diameter above roller 220 mm - Diameter under the roll 220 mm - Side roller diameter 180 mm - Hydraulic Hnedpfx Aiju Evqhj Dsl - Digital display for the left roller movement - Digital display for the movement of the lower middle roller - Digital display for the movement of the right-hand roller - The top roller can be folded out hydraulically - Steel construction ST-52 - Hydraulic drop end for easy roller positioning - Hydraulic up and down movement system with center and side rollers - Hydraulic balancing system - Overload protection - Documentation - 400V