Used Ryan Ga 30 for sale (28,871)

Condition: excellent (used), Year of construction: 2012, operating hours: 21,000 h, Screw compressor compressed air tank dryer oil remover location Mülheim an der Ruhr Bedewr Nnbepfx Agkeld

Year of construction: 2007, condition: ready for operation (used), Three Atlas Copco compressors are available. 1) Atlas Copco GA 37 VSD, year of manufacture: 2007, air flow rate: 7.25m³/min, max. operating pressure: 12.8bar, power: 37kW, refrigerant: R404a, weight: approx. 1200kg, operating hours: approx. 120844h. 2) Atlas Copco GA 50 VSD, year of manufacture: 2003, max. operating pressure: 13bar, air flow rate: 9.18m³/min, power: 50kW, refrigerant: R404a, weight: approx. 1300kg, operating hours: approx. 159308h. 3) Atlas Copco GA 30, year of manufacture: 2003, air flow rate: 5.34m³/h, max. operating pressure: 8bar, power: 30kW, refrigerant: R404a, weight: approx. 1000kg, operating hours: approx. 29700h. Documentation available. An on-site inspection is possible. Blsdpfx Agoyn Nzxskod

Condition: used, Year of construction: 1998, operating hours: 30,559 h, functionality: fully functional, overall weight: 825 kg, power: 30 kW (40.79 HP), fuel type: electric, volume flow: 312 m³/h, operating pressure: 8 bar, pressure (max.): 8.5 bar, noise level: 70 dB, Equipment: documentation/manual, refrigerant dryer, type plate available, ❇️ Atlas Copco GA30 FF Screw Compressor – 30 kW, 8.5 bar, Excellent Maintenance For sale is a used but exceptionally well-maintained industrial screw compressor from the premium manufacturer Atlas Copco, model GA30 FF with integrated refrigeration dryer. The unit was built in 03/1998, has received regular servicing, and was in reliable operation until February 2022. ⸻ ❇️ Technical Data • Model: GA30 FF (with integrated refrigerant dryer) • Year of manufacture: March 1998 • Motor power: 30 kW (approx. 40 HP) • Max. operating pressure: 8.5 bar (factory specification) • Free air delivery (FAD): approx. 5.2 m³/min (≈ 312 m³/h) • Connection: 400 V / 50 Hz / 3~ (5-pin) • Fuse protection: 3 × 63 A • Operating hours (at last service): 30,559 h • Weight: approx. 800–850 kg ⸻ ❇️ Maintenance & Condition The compressor was last professionally serviced by DF Druckluft-Fachhandel GmbH on 14.02.2022 with the following parts replaced: • Oil plug • Solenoid valve • Intake regulator kit Since then, the unit has not been operated. It was immediately prepared for decommissioning after servicing and is therefore in ready-to-operate condition. The compressor was stored dry and protected indoors. Bodjykk Raspfx Agksld ⸻ ❇️ Features & Equipment • FF model: integrated refrigeration dryer for dry compressed air – ideal for sensitive applications such as spray painting or control air technology • Elektronikon® controller – user-friendly control panel with operating data storage • Sound insulation enclosure (industrial version) • Steel housing – transportable by pallet truck or forklift ⸻ ✅ Ideal for Workshops · Production facilities · Metal and woodworking · Tire services · Sandblasting · and much more ⸻ ❇️ Location & Loading • Location: 71083 Herrenberg (near Stuttgart) • On-site loading assistance available (forklift on site) • Inspection by arrangement is welcome ⸻ ❇️ Price & Contact Price: €3,490 (final price) No VAT will be charged according to §19 UStG. ———— ‼️ Please also check my other listings. It’s worth it! Viewing and collection in 71083 Herrenberg. ⚠️ Shipping (by freight forwarding) or delivery possible at buyer’s expense.

Year of construction: 1994, condition: ready for operation (used), A small compressor system including separator, dryer and tank is available. 1) Compressed air receiver MetaCon, year of manufacture: 1994, nominal volume: 1000l, operating temperature range: -10°C/50°C, max. operating overpressure: 11bar. 2) Compressor Atlas Copco GA 18, year of manufacture: 1994, air volume flow: 36.4l/s, max. operating pressure: 10bar, motor power: 18.5kW, speed: 1500rpm. 3) Air dryer Schneider Druckluft GmbH DK 3000 N, max. inlet temperature: 50°C, max. operating pressure: 16bar, refrigerant: R134a, refrigerant charge: 700g, operating overpressure: 17bar. 4) Oil-water separator Donaldson Ultrasep Plus 30, max. residual oil content: 10mg/l, max. compressor capacity: 30m³/min, oil adsorption capacity: 25l, machine dimensions X/Y/Z: approx. 900mm/1000mm/400mm, weight: approx. 70kg. An on-site inspection is possible. Bljdpfsx Ih D Tox Agksd

Condition: good (used), Tapping chuck, thread chuck, tapping chuck, thread cutting attachment Bodpfx Agewvfyujkold -Manufacturer: Fahrion, thread cutting attachment GA 30 -Shaft: MK3 -Reversing gear: integrated quick return, slip clutch -Clamping diameter: max 23 mm -Dimensions: 230/125/H80 mm -Weight: 6.3 kg

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: AII 31.3506, power: 22 kW (29.91 HP), pressure (max.): 7.5 bar, rotational speed (max.): 3,000 rpm, MACHINE DETAILS Power: 22 kW Engine Engine power: 30 kW Max. speed: 3,000 rpm Bedpfx Ageydnxuokold Free air delivery: 83 l/s Final pressure: max. 7.5 bar

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Screw Compressor Manufacturer: Atlas Copco Model: GA30 VSD Year of manufacture: 2013 Stepless speed control Operating hours: approx. 46,980 h Power: 30 kW Air flow: 5.58 m³/min Bodpfxex U D Smo Agkjld Weight: 530 kg Max pressure: 13 bar

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Screw Compressor Manufacturer: Atlas Copco Model: GA30 VSD+ Year of manufacture: 2014 Speed: steplessly controlled Operating hours: approx. 59,880 h Power: 30 kW Volume flow: 5.58 m³/min Weight: 380 kg Max pressure: 13 bar Blodpfxex U D Rpe Agkjd

Condition: excellent (used), Year of construction: 1984, For sale: professional Robatech RoBa 30 adhesive melter, Swiss-made (Robatech AG CH-5630 Muri). The unit is fully functional, complete, and ready for operation. Ideal for packaging lines, folder-gluer machines, cartoners, and equipment requiring precise hotmelt adhesive application. Technical specifications: * Model: RoBa 30 * Year of manufacture: 1984 * Output: 900 g/min * Max hydraulic pressure: 40 bar * Max air pressure: 5 bar * Max operating temperature: 200°C Bedpfxsum Hufo Agksld * Power supply: 240 V * Power consumption: 10 A * Pump ratio: 1:8 * Nameplate legible, pressure gauge operational Condition: * device in good technical condition * complete, with no missing parts * Swiss quality – very robust construction

Condition: refurbished (used), battery capacity: 465 Ah, battery voltage: 80 V, total height: 798 mm, total length: 1,228 mm, total width: 478 mm, Tested forklift battery for your truck – 80V 3PZS 465 – special tray + 1 year warranty + incl. Aquamatik system + incl. end discharge devices & REMA 320 connector (other connectors available upon request) + Capacity: min. 90–100% (C5 capacity protocol supplied upon delivery) + Year of manufacture: 2024 Dimensions: Length: 1,228 mm Width: 478 mm Height: 798 mm Weight: approx. 1,210 kg Bjdpewzvz Hsfx Agksld Suitable for the following models and others: Jungheinrich EKX 514 Jungheinrich ETX Jungheinrich ETX 514 Toyota FBM16 Toyota FBMF16 Bradshaw T20 Dimos EFY3504R Heli CPD 30 All common battery sizes available, please inquire. Transport possible.

Condition: refurbished (used), battery capacity: 750 Ah, battery voltage: 80 V, total height: 627 mm, total length: 1,026 mm, total width: 996 mm, Tested forklift battery for your forklift - 80V 6PZS 750Ah - DIN A + 1-year warranty + incl. Aquamatik (automatic water filling system) + incl. end discharge connector & REMA 320 plug (other plug types can be installed as needed) + Capacity: min. 90–100% (C5 capacity protocol included upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,026 mm Width 996 mm Height 627 mm Weight: approx. 1,730 kg Compatible with the following models and others: Toyota 7FBMF30 Toyota 7FBMF35 Crown TSP 6000-D Crown TSP 7000 Bljdpfx Aewzvxfegkod Common battery sizes available, please inquire. Transport possible.

Condition: excellent (used), Year of construction: 2008, Weishaupt RGMS 30 dual fuel burner gas+heavy oil Output: 2600Kw Bjdpomnqbwefx Agkold Year: 2008 Viewing by telephone only! Preferred sale to dealers, traders or export. All information without guarantee, subject to errors and prior sale. The seller accepts no liability for typing and data transmission errors. Of course we also take care of all formalities Loading possible

Condition: good (used), Approx. 30lfm shelf rack system Schaefer R3000 Manufacturer: Schaefer R3000 Bjdpfxoccxuie Agkold as good as new, see pictures. upright, galvanized, 2,5 m height, depth 60 cm Shelves, galvanized, 200 kg load/ shelf, shelf width approx.100 cm Negotiable price: € 3.290,00 net ex stock Offer consists of: 31 pcs. uprights or frames, height 2,5 m, galvanized 90 pcs. Shelves, 200 kg load per shelf, galvanized 10 pcs. cross bracing for stiffening 3 levels per field (of course more levels are possible against surcharge) Other combinations possible. Heights 2,3m, 2,5m or 3m available. Goods are in stock. Constantly more than 3000 running meters of pallet racks from numerous manufacturers in stock. Transport and assembly on request. Further information on request. (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our AGB, all prices excl. VAT ex stock) Purchase / Sale We look for, and/or offer constantly numerous articles from most diverse ranges. To get to our site, please click on our logo! broom-clean business evacuations company dissolutions Fast- flexible - ready to hit! We clear and dispose also for liquidators. Write us with some keywords, we will contact you immediately.

Year of construction: 2017, condition: ready for operation (used), functionality: fully functional, total length: 1,685 mm, total width: 1,550 mm, total height: 2,260 mm, product height (max.): 310 mm, product width (max.): 150 mm, machine/vehicle number: 100281518, No reserve price – guaranteed sale to the highest bidder! The original price was over 100,000 EUR! The device is ready for loading & packed for transport! Loading can be handled by the seller. TECHNICAL DETAILS Maximum inspection width: 150 mm Maximum inspection height: 310 mm CONVEYOR SYSTEM Conveyor type: Turn table Speed: 12 – 45 m/min MACHINE DETAILS X-ray Generator Voltage: 30 – 75 kV Current: 1 – 8 mA Power: max. 300 W Dimensions (L x W x H): 1,685 x 1,550 x 2,260 mm Protection class: IP65 / IP66 Electrical data Power supply: 200 – 240 V Bledpfx Asympcmjgkjd Frequency: 50 / 60 Hz EQUIPMENT Rotary table conveyor Hermetic air cooling X-ray inspection system

Condition: ready for operation (used), Compressor GA-55 - maximaal 10 bar - 131 liter/sec bij 8 bar = 50,7 kW Bljdpfx Ajygyw Ijgkjd - 129 liter/sec bij 9,5 bar = 56,3 kW - gewicht: 1600 kg - afmetingen: 2590 x 912 x 1790 mm Droger FD130 - 132 liter/sec bij 3° C - 165 liter/sec bij 6° C - 186 liter/sec bij 10° C - maximaal 20 bar - gewicht: 200 kg - afmetingen: 1419 x 686 x 928 mm

Condition: new, functionality: fully functional, Year of construction: 2024, operating hours: 180 h, load capacity: 3,000 kg, lifting height: 4,700 mm, free lift: 1,460 mm, fuel type: gas, mast type: triplex, construction height: 2,215 mm, power: 43 kW (58.46 HP), fork length: 1,150 mm, empty load weight: 4,490 kg, total length: 2,715 mm, drive type: Treibgas, construction width: 1,225 mm, LPG forklift Load center of gravity: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: torque converter Bledpewhr Rksfx Agkod Speed class: 20 Condition: New machine Technical condition: New Front tires type: Superelastic Front tires Size: SE 28-9-15 Front tires Condition: 80 - 100% Rear tires Type: Superelastic Rear tires Size: SE 6.50 10 Rear tires Condition: 80 - 100% Description: Simplicity, comfort, reliability and productivity. The MI 30 is a front and mast forklift truck with an internal combustion engine that has a lifting capacity of 3 tons and is aimed at professional users in the logistics and distribution sectors, among others. Extremely robust thanks to a rigorous choice of components and a simplified design, the machine is easy to maintain and will become a permanent part of your fleet. To ensure operator comfort and safety, access to the operator's platform has been simplified: grab handle, non-slip footboard, access from both sides... The view to the outside is optimal thanks to the rear profile supports, a large distance between the mast supports and the open roof. Sideshift, 3rd valve, rear work lights, front work lights, roof cover,

Condition: excellent (used), Year of construction: 2017, Complete top-equipped Behringer HBP 310-523 GA sawing system. - Feed system with cross conveyor - 3 m pusher gripper - NC double-miter automatic saw HBP 310 523 GA - Discharge unit consisting of hydraulic high-lift bridge, powered roller conveyors with ejector device An ideal system for steel traders, metal fabricators, and machine builders Photos show current condition, machine not yet refurbished. Bedpfsymdudex Agkold

Condition: like new (used), functionality: fully functional, first registration: 12/2014, fuel type: diesel, emission class: euro6, Year of construction: 2014, power: 340 kW (462.27 HP), Equipment: ABS, air conditioning, airbag, retarder, spoiler, DAF CF 85-460 Hook lift PRIS-MAG 30 TON 4 axles 8x2 Year 12/2014 Euro 6 440 HP (340 kW) Engine capacity 12,902 cc Diesel Automatic gearbox Retarder Wheelbase 4,600 mm Total vehicle length 8,900 mm Gross weight 32,000 kg Payload 18,600 kg Bljdpfxexvxkws Agksd Air conditioning 4th steering and liftable axle ABS Short cab Electric windows and mirrors Mileage 420,000 km

Condition: used, Year of construction: 2021, Multi-pallet fork Bsdpfx Agsymtxrjkold

Condition: excellent (used), functionality: fully functional, Proofing Cabinet Gram Baker GA 930 For trays 580 x 780 mm Stainless steel construction with programmable control Especially suitable for dough pieces with long fermentation! Simple design Bljdpfeyhy S Ejx Agked Humidity up to 90% RH Unit installed on top Dimensions approx.: 850 x 1200 x 2100 mm (W x D x H) Connection 230V Used machine Visit our large bakery equipment warehouse!

Condition: used, mileage: 7,99,467 km, power: 463 kW (629.50 HP), first registration: 06/2019, fuel type: diesel, overall weight: 18,000 kg, tire size: 385/65R22,5, axle configuration: 4x2, brakes: retarder, color: grey, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, front tire size: 385/65R22,5, rear tire size: 315/80R22,5, number of seats: 2, Equipment: ABS, air conditioning, cabin, cruise control, differential lock, electronic stability program (ESP), navigation system, onboard computer, parking heater, soot filter, traction control, Mercedes-Benz Actros 1863 Giga Space Ultimate Edition - 1 of 30 units - 15.6L engine displacement - Automatic transmission - Differential lock - Retarder - Xenon headlights - Leaf/air suspension - Leather interior - Automatic climate control - Auxiliary heater - Navigation system - Electric exterior mirrors & power windows - Fog lights - Refrigerator box - EURO 6 emissions standard - Aluminum fuel tank - Adaptive cruise control - Full aerodynamic kit - Tires: 385/55R22.5 (front) + 315/70R22.5 (rear) Very good condition! Export price! Yourtrucks Group Yourtrucks Group maintains business relationships worldwide. Both our purchasing and sales activities extend beyond national borders, so our listings always display the export price, which is independent of the country of use. Yourtrucks GmbH assembles the content of this website with the utmost care and ensures regular updates. The information provided is intended as non-binding general information and does not replace detailed individual advice when making a purchase decision. Only the terms specified in the sales contract are binding. Subject to change, error, typographical error, and prior sale. Our general terms and conditions apply exclusively. Languages: - We speak English Bljdpeynlprefx Agkjd - On parle français - (Contact for other languages) - Mówimy po polsku - Hablamos español - Falamos português - Parliamo italiano

Condition: used, empty load weight: 12,640 kg, maximum load weight: 28,360 kg, overall weight: 41,000 kg, first registration: 06/2023, next inspection (TÜV): 06/2026, loading space length: 9,900 mm, loading space width: 2,550 mm, loading space height: 910 mm, loading space volume: 22 m³, suspension: air, tire size: 235/75 R 17.5, color: other, gearing type: other, front tire size: 235/75 R 17.5, driver cabin: other, emission class: none, Available immediately with a minimum rental period of 4 weeks – Contact Mr. O. Schinke Rent – please contact Mr. Schinke Platform length: 3,800 mm, loading length: 9,400 mm, loading width: 2,550 mm, approach slope: 1,300 mm Rear loading ramps: 2,950 x 1,700 x 900 mm, approach angle approx. 11 degrees, hydraulic ramp lifter, hydraulically adjustable ramps Lubrication aid, Smart Board, loading bed extension Spare wheel holder, including spare wheel, storage box 1 front support: telescopic aluminum support for uncoupling 2 foldable rear support legs with spring mounts, operation of the hydraulic components requires a compatible truck hydraulic system with feed and return air (not included) Available as a long-term rental vehicle as well! Contact us for your customized offer. * ABS (anti-lock braking system) * Steering axle on the 2nd and 3rd axle * Side underrun protection * Rubber-metal pads on the loading ramps * Plastic toolbox * Single lift axle * Platform side walls * Hydraulic ramp lifter * Hydraulically adjustable ramps * Spare wheel holder Bjdpsyk Dcvsfx Agksld * Beacon * SAF axles * Smart Board * Supports * Warning package * Central lubrication system We expressly reserve the right of prior sale, as this item is also offered on other platforms. Accessory details are provided without guarantee. Subject to change, prior sale, or mistakes. We strongly recommend and offer inspections and testing to ensure you have the correct understanding of the vehicle's condition and suitability. Inspections and testing are possible anytime by appointment and are expressly encouraged. We handle all formalities and deliver the vehicle with the requested export plates at extra cost. Pictures are partially edited and are for initial viewing purposes only. Please contact us for genuine, up-to-date images if you are interested.

Condition: new, functionality: fully functional, Year of construction: 2024, operating hours: 16 h, load capacity: 3,000 kg, lifting height: 4,700 mm, free lift: 1,460 mm, fuel type: gas, mast type: triplex, construction height: 2,215 mm, power: 43 kW (58.46 HP), fork length: 1,150 mm, empty load weight: 4,490 kg, total length: 2,715 mm, drive type: Treibgas, construction width: 1,225 mm, LPG forklift Load center of gravity: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: torque converter Speed class: 20 Condition: New machine Technical condition: New Front tires type: Superelastic Bledpfx Agew N Tpveked Front tires Size: SE 28-9-15 Front tires Condition: 80 - 100% Rear tires Type: Superelastic Rear tires Size: SE 6.50 10 Rear tires Condition: 80 - 100% Description: Simplicity, comfort, reliability and productivity. The MI 30 is a front and mast forklift truck with an internal combustion engine that has a lifting capacity of 3 tons and is aimed at professional users in the logistics and distribution sectors, among others. Extremely robust thanks to a rigorous choice of components and a simplified design, the machine is easy to maintain and will become a permanent part of your fleet. To ensure operator comfort and safety, access to the operator's platform has been simplified: grab handle, non-slip footboard, access from both sides... The view to the outside is optimal thanks to the rear profile supports, a large distance between the mast supports and the open roof. Sideshift, 3rd valve, rear work lights, front work lights, roof cover,

Condition: good (used), functionality: fully functional, Year of construction: 2020, operating hours: 4,400 h, load capacity: 3,000 kg, lifting height: 5,950 mm, free lift: 1,600 mm, fuel type: diesel, mast type: triplex, construction height: 2,650 mm, Equipment: fork extension, pallet forks, retractable fork, sideshift, Load capacity 3000 kg Linde H 30 Diesel Mast type: Triplex full free lift Year of manufacture: 2020 Blsdpfoygcr Iox Agksd Operating hours: 4400 Lifting height approx. 5950 mm Overall height approx. 2650 mm 3rd and 4th valve double auxiliary hydraulics Sideshift + telescopic forks (alternative attachments available on request) Gross price 29631 / Net price 24900 Available mid-February Looking for another forklift or high-lift pallet truck? LPG, electric, diesel? Contact us and we will find the right vehicle for you. Subject to error and prior sale. Sale only to businesses, without warranty.

Condition: used, Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station -Manufacturer: HAWE, hydraulic unit with double pump -Hydraulic pumps: type IPC5-40 / IPC6-30 -Pressure: up to 250 bar -Flow rate: /min -Engine: Loher KNGA250SB-04Z 75 kW Bedep A A R Sopfx Agkold -Individual components: see photos -Dimensions: 2300/800/H9500 mm -Weight: 1000 kg