Used Plasmo 19-32/0026 for sale (13,096)

Condition: ready for operation (used), Norgen control unit system control .: 1950025 Serial number: 32/00 A=3-9 + 600665 for Emag machine, used, good condition, 100% functional, scope of delivery as per photos Guodpfxsul Ipho Akaog

Condition: ready for operation (used), Heidenhain UV 130 ID: 324 998-03 SN: 8275519 – with test protocol, expertly fully overhauled and tested, includes 3 months warranty, 100% functional, delivery scope as shown in the photos. Please note: In the exchange procedure, your defective part must not exhibit any mechanical damage such as breakages, as these are no longer repairable. In such cases, an additional invoice of €500 incl. VAT will be issued. Attention: You are bidding on a Heidenhain UV 130 inverter, ID: 324 998-03 SN: 8275519, on an exchange basis (exchange service), professionally overhauled and tested, with a 3-month warranty, 100% functional, and scope of delivery as per photos. In both repair and exchange procedures, your defective exchange component must be free of mechanical damage such as breakages, since these cannot be repaired. Otherwise, a subsequent charge of €500 incl. VAT will apply. Gusdpfx Ajy Nrnfokajg

Condition: used, Year of construction: 1993, Used machine Guedpfxszyy D Tj Akasg Year of manufacture: 1993 Equipment and technical data:

Condition: good (used), Alzmetall AC 32 Turret Twin-Head Gang Drill An extremely robust and rare twin-head gang drill based on two Alzmetall AC 32 drilling units. This system is a high-quality industrial machine designed for highly efficient serial or progressive machining operations. Instead of standard spindles, this machine is equipped with two separate tool turrets. This enables fully automated machining cycles (e.g., centering, drilling, countersinking, tapping) without the need for manual tool changes. Technical Data & Equipment (per head / entire system): Drilling unit manufacturer: Alzmetall (Germany) Model: AC 32 (Electronically controlled with digital display) Drilling capacity: max. 32 mm in steel Gsdeznic Uopfx Akasug Tapping capacity: max. M 24 / M 30 Tool changer: 2x swiveling multi-station turret heads Machine table: Solid, ground cast-iron table with T-slots for flexible setup Safety: Full enclosure of the working area (safety cabin) with viewing windows for optimal protection against chips and coolant spray Additional features: Integrated coolant system, compressed air blow-off gun, central counterweight system for easy height adjustment of the entire crossbeam You can find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: used, functionality: fully functional, Agilent 6210 G3258A, G1969A Time of Flight Liquid Chromatograph Mass Spectrometer LC/MSD TOF. The Agilent TOF is an orthogonal-axis time-of-flight mass spectrometer (oa-TOF). That is, the ions reaching the time-of-flight chamber are impelled in a direction perpendicular to their original path. You can set up an Agilent time-of-flight mass spectrometer system (TOF) in several configurations: -For normal flow LC/MS with a binary pump, quaternary pump, well-plate sampler (or autosampler) and ESI , APCI, APPI or MMI ion sources -For microflow LC/MS with a capillary pump, micro well-plate sampler and ESI, APCI or MMI ion source -For nanoflow LC/MS with a nanopump, micro well-plate sampler and nanospray source or dual nanospray source -TOF system with an AP-MALDI source Each system has advantages for drug discovery — high throughput sample screening with highly sensitive detection and accurate mass assignment. Features: Godpfet Ui N Uox Akajug ESI – Electrospray Ionization APCI – Atmospheric Pressure Chemical Ionization APPI – Atmospheric Pressure Photo Ionization MALDI – Matrix-Assisted Laser Desorption Ionization MMI – Multimode Ionization Good working condition. Please check out our other listings as well.

Condition: ready for operation (used), functionality: fully functional, power: 54 kW (73.42 HP), fuel type: diesel, color: orange, operation weight: 7,500 kg, Year of construction: 2005, operating hours: 6,673 h, type of cooling: water, Equipment: additional headlights, adjustable boom, gripper hydraulics, hammer hydraulics, hydraulics, rubber tracks, standard shovel, Schaeff compact excavator, adjustable boom, grapple and digging bucket, German-made machine. Loading possible. Godpfx Ajzuvu Rskajug Sale only to commercial businesses and with exclusion of all warranties.

Condition: new, Rexroth HDS02.2-W040N-HS32-01-FW MNR: R911190007 SN:7260205058674, unused in opened original packaging, 100% functional, scope of delivery as per photos Guedpjtqa U Dsfx Akajg

Condition: good (used), Year of construction: 1997, operating hours: 10,216 h, functionality: fully functional, turning diameter over cross slide: 200 mm, turning length: 300 mm, spindle bore: 32 mm, spindle speed (max.): 8,000 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 345 mm, spindle motor power: 11 W, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, rotational speed (min.): 50 rpm, rotational speed (max.): 8,000 rpm, feed length X-axis: 200 mm, feed length Z-axis: 300 mm, feed rate X-axis: 12 m/min, feed rate Z-axis: 12 m/min, type of input current: AC, torque: 73 Nm, swing diameter over bed slide: 445 mm, chuck outer diameter: 140 mm, spindle nose: DIN55026 Gr. 5, Equipment: documentation/manual, Due to restructuring measures, we are selling our Weiler DZ32 CNC lathe. - Year of manufacture: 1997 - Second owner (previously used in a training workshop) - Very good condition for its age - Very few operating hours - total running hours: 10,216 h - Siemens Sinumerik 820 (GA3) T control with C-axis - Max. turning diameter: 230 mm / max. turning length: 300 mm - Main spindle: 8,000 rpm - Counter spindle: 5,000 rpm - 3-jaw hydraulic chuck Röhm 140 mm for main spindle - Additional collet chuck for main spindle - Collet chuck for counter spindle - Drive power: 11.5 kW - Sauter tool holder with 16 driven tools (max. 4,000 rpm) - Tool holder size: VDI 20 - Chip collection tray (hydraulic) - With substructure for height adjustment - Fully functional - Many tool holders available, also with drive; these can be purchased depending on the price. - Complete operating and programming documents (German) - Spare parts and service available from Weiler - Machine can be inspected in our workshop while powered on This offer is non-binding. Subject to prior sale. No online sales. The sale is only to commercial customers after an on-site inspection and acceptance. Guedpezzcfpofx Akaog Due to the age of the machine, the sale is made without any warranty. Pick-up only (EXW) - no shipping.

Condition: used, bore capacity in steel (diameter) 32 mm Gsdpfjzwg Rusx Akasug arm length 1230 mm table surface area 1200 x 500 mm bore stroke 180 mm feed - independent 0,10 - 0,15 - 0,20 - 0,30 mm turning speeds 45 - 1370 U/min taper MK 4 total power requirement 2,7 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 2,2 x 1,8 x 2,3 m Quick radial with: - Feed - Thread cutting device

Condition: used, Year of construction: 2015, functionality: fully functional, working width: 1,300 mm, total height: 1,780 mm, total length: 9,000 mm, total width: 1,783 mm, LOW USAGE!!! Technological line – equipment characteristics The technological line consists of a set of devices designed for transporting, cleaning, drying, and curing components, including furniture fronts and panels. The TB 2000 and TB 1500 belt conveyors are equipped with belts resistant to abrasion, friction, and solvents. The drive is powered by a geared motor controlled by a frequency inverter, providing a feed rate of 2.2 to 20 m/min. The devices have independent control panels with PLCs. The SMARTCLEAN 33-F brush machine is used to clean components before the painting process. It has a steel, reinforced body, adjustable height of the working units, and a system of brushes, blowers, and deionizing bars. The working width is 1300 mm, and the range of thickness of the processed components is 3–80 mm. The feed rate is 4–20 m/min, and the brush speed is 250–1100 rpm. The machine is equipped with a PLC, a touch panel, and safety systems. The UV-R SP M2 oven is designed for curing UV-cured products and for operation in a line with a working width of 1300 mm. It is equipped with two UV lamps, a cooling system, and an integrated conveyor with a length of 2000 mm. The total length of the oven is 12,000 mm, and the maximum component thickness is 80 mm. Control is via PLC and a touch LCD monitor, with the ability to save programs. The system enables precise adjustment of the radiation power and automatic control of the lamps and cooling. The TT 11000 chain conveyor has steel guides and chrome-plated beams. The length of the device is 11,000 mm, the operating speed is 2.1–20 m/min, and the drive power is 0.75 kW. Control is via a frequency inverter. The TR 1500 roller conveyor is equipped with driven PVC rollers with a diameter of 66 mm and a pitch of 125 mm. Its length is 1500 mm, and the feed rate is 2.2–20 m/min. The device has a PLC panel, a protective cover, and a photocell at the output. Gedpfxez Ahr Rj Akajug The ECOGEL 64/5 oven is designed for rapid drying of components using laminar flow of hot air. The flow is in the opposite direction to the direction of panel transport. The oven is equipped with a G4 filtration system, a heat exchanger with automatic temperature control, and supply and exhaust fans. The total length is 9000 mm, the working width is 1300 mm, and the maximum component thickness is 80 mm. The installed power is 3.7 kW, and the thermal power is 76,400 kcal/h. Control is via PLC and an LCD monitor. The AQUADRY LA/8 oven is designed for rapid drying of water-based stains and lacquers. It uses high-speed air knives to ensure efficient heat exchange. The process can be further accelerated using infrared lamps. Air recirculation helps to reduce energy consumption. The entire line has integrated control systems, safety features, and solutions that enable the automation of transport, cleaning, drying, and curing processes.

Condition: used, Year of construction: 1992, functionality: fully functional, machine/vehicle number: 2202, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, total height: 1,740 mm, total width: 1,740 mm, total length: 2,090 mm, overall weight: 1,725 kg, Equipment: documentation/manual, The machine is in very good condition – it was used as a training machine until 2018; since then, it has rarely been in operation. Operating voltage: 380 V. Spindle mount: ISO 40. Quill stroke: 100 mm. Spindle speeds: 40 - 2000 rpm. Rotary table. Guedpfx Akjw Urirjasg

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 532 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. Guedpfez Agw Eex Akasg - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: good (used), Year of construction: 2007, functionality: fully functional, Kolbe MWE-32 Meat Grinder Mixer In good used and working condition. New belt and motor. The machine runs on 400 volts, is made entirely of stainless steel, has a mixing paddle, is 98 cm Enterprise, has been tested in the workshop, and is ready for immediate use. FD 200 loading, built in 2009. The machine is built in 2007. Further information upon request. Cash or advance payment. Guedpfxowcgr Es Akajg Sale to businesses only. No guarantee. No warranty.

Condition: used, functionality: fully functional, Year of construction: 2001, operating hours: 10,995 h, load capacity: 13,600 kg, lifting height: 3,000 mm, fuel type: diesel, mast type: duplex, construction height: 3,200 mm, power: 140 kW (190.35 HP), fork carriage width: 2,500 mm, fork length: 2,400 mm, empty load weight: 23,100 kg, total length: 5,150 mm, drive type: Diesel, construction width: 2,530 mm, Heavy-duty forklift – diesel Load centre: 1200 Mast type: Duplex Transmission: Clark HR28000 Condition: Ready for operation and fully functional Guodpfszz Dmhox Akajg Technical condition: very good Front tyres type: Superelastic Front tyres size: 12.00-20 Front tyres condition: 80 - 100% Rear tyres type: Superelastic Rear tyres size: 12.00-20 Rear tyres condition: 20 - 40% Sideshift, fork positioner, hydraulic sideshift + fork positioning

Condition: used, Year of construction: 1999, Max. cutting length: 4200 mm Max. cutting height: 45 mm Max. cutting depth: 515 mm Saw blade diameter: 180 mm Clamping beam movement: pneumatic Fencing system: Fence indicator: Dust extraction channel: Yes Dust extraction: external dust extraction Guodpfezvzicox Akaeg Feed type: manual Dadoing unit: with diamond-tipped saw blade (secondary cut) Machine type: stationary Weight approx.: 950 kg Dimensions: 5400 x 1180 x 160 mm Motor power: 2.2 kW Dust extraction diameter: 80 mm Storage location: Nattheim

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Complete Tetra Pak filling line TBA/19 TPA 200 Slim, including: ● Filling machine TBA/19 TPA 200 Square, Version 10V, year of manufacture 2002 ● Straw applicator Tetra Straw Applicator 21 Guodpfxezzr Igs Akaog ● Cardboard packer TCBP 70 In working condition.

Condition: good (used), Donau DR 32 High-Speed ​​Radial Drilling Machine A high-precision, robust high-speed radial drilling machine valued for its reliability in mechanical engineering and industrial manufacturing. Thanks to its swiveling arm, it allows for the quick and flexible positioning of the drill head over the workpiece. Technical Specifications Drilling capacity: Max. 32 mm in steel. Tool holder: MT 4 (Morse Taper). Speed ​​range: Approx. 41 to 1,800 rpm. Quill stroke: 190 mm to 200 mm. Reach: Flexibly adjustable from approx. 240 mm to 850 mm. Table size: 1,200 x 600 mm. Typical Features Guedpfsznkgnox Akaeg Tapping function: Integrated automatic system for thread cutting (e.g., up to M26 in steel). Feed rates: Automatic quill feed with multiple settings. Coolant system: Integrated pump and coolant channel directly on the work table. "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: used, functionality: fully functional, Year of construction: 2019, machine/vehicle number: 2425918, load capacity: 227 kg, lifting height: 5,790 mm, platform length: 1,630 mm, platform width: 660 mm, overall weight: 1,312 kg, transport length: 1,780 mm, transport width: 810 mm, transport height: 990 mm, fuel type: electric, tire size: 12x4x8, color: red, Technical Data Year of manufacture: 2019 Engine: Electric Working height: 7.79 m Godpfeyqy Nlsx Akaoug Platform height: 5.79 m Platform extension: 0.91 m Platform dimensions (L x W): 1.63 m x 0.66 m Overall dimensions (L x W x H): 1.78 m x 0.81 m x 2.10 m Weight: 1,312 kg Max. load capacity: 227 kg Load capacity with distributed load: 114 kg Travel speed: 1.1 km/h - 3.1 km/h Max. gradeability: 25% Fully operational General used condition Delivery optional Rental optional

Condition: used, functionality: fully functional, Year of construction: 2019, machine/vehicle number: 2425938, load capacity: 227 kg, lifting height: 5,790 mm, platform length: 1,630 mm, platform width: 660 mm, overall weight: 1,312 kg, transport length: 1,780 mm, transport width: 810 mm, transport height: 990 mm, fuel type: electric, tire size: 12x4x8, color: red, Technical Data Gedpsyqy Nrofx Akaeug Year of manufacture: 2019 Engine: Electric Working height: 7.79 m Platform height: 5.79 m Platform extension: 0.91 m Platform dimensions (L x W): 1.63 m x 0.66 m Overall dimensions (L x W x H): 1.78 m x 0.81 m x 2.10 m Weight: 1,312 kg Max. load capacity: 227 kg Load capacity with weight distribution: 114 kg Travel speed: 1.1 km/h - 3.1 km/h Max. climbing ability: 25% Fully functional General used condition Delivery available upon request Rental available upon request

Condition: repair required (used), Year of construction: 2010, operating hours: 64,380 h, functionality: unexamined, power: 132 kW (179.47 HP), volume flow: 1,562.4 m³/h, pressure (max.): 8.1 bar, type of cooling: water, Screw compressor Atlas Copco GA132VSDW Inverter integrated 132 kW 8.10 bar Gsdjzznqkopfx Akaeug 26.04 m3/min Year of manufacture: 2010 Operating hours: 64,380 h

Condition: new, Year of construction: 2020, functionality: fully functional, tank capacity: 9,000 l, Equipment: documentation/manual, BRINOX 9000 L GMP Wash and Elution Solution Tank Horizontal Stainless Steel Pressure Vessel – Year of Manufacture 2020 – Complete FAT & GMP Documentation BH6752-BH1001 Package 32 Manufacturer: BRINOX Process Systems Serial Number: 1003558 Year of Manufacture: 2020 Nominal Volume: 9,000 liters Design: GMP-compliant stainless steel pressure vessel Application The tank was used in a pharmaceutical manufacturing facility. Suitable for preparation, storage, and dispensing of process solutions in GMP environments. Construction and Equipment - Cylindrical stainless steel tank in horizontal configuration - Front-end process connections - Large manway with pressure lock - Integrated CIP (Cleaning-In-Place) system with spray ball - Highly polished internal surfaces - Hygienic product-contact connections - Multiple instrumentation and sensor nozzles - Documented weld seams with full traceability - Separate stainless steel support legs included Condition Visually and technically in very good condition. Internal surfaces are mirror-polished and clean. No visible damage to the shell or connections. Accessories and attachments present as per photo documentation. FAT and Documentation Status According to FAT documentation “IT-11.1 Inspection of Welding Documentation”, weld documentation was inspected during the Factory Acceptance Test (FAT 01, 23.10.2020). The following were confirmed, among others: - Identification of welders and weld inspectors - Welder qualifications according to EN ISO 9606-1 - WPS and WPQR documentation - Proof of shielding gas suitability - Documented test welds - Visual spot checks with no findings - Traceability according to material certificates 3.1 The complete weld documentation is part of the Turn-Over-Package. Documentation – Fully Available - FAT plan and FAT report - Layout and construction drawings - P&ID diagrams - Calibration protocols - Surface finish and roughness tests - Leak test - Welding plan Gusdsykkk Hjpfx Akajg - WPQR - WPS - Welder qualifications - Borescope inspection report - Incoming goods inspection reports - Sensor calibrations The complete technical documentation is available digitally. Special Features - Fully documented GMP configuration with certified welding documentation and extensive quality package - Ideally suited for reinstallation in pharmaceutical plants or environments requiring validated applications.

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, operating hours: 200 h, total length: 1,590 mm, total height: 2,130 mm, total width: 1,610 mm, type of input current: AC, input voltage: 230 V, input current: 30 A, travel speed (max.): 6,000 mm/min, space requirement length: 2,000 mm, space requirement height: 2,500 mm, space requirement width: 3,800 mm, Array – Your Solution for Industrial 3D Printing Production Array is a scalable platform for additive manufacturing, designed for the production of end-use polymer parts directly on your shop floor. Featuring integrated robotics, intelligent software, and high-performance FFF printing, Array reduces labor costs, increases productivity, and delivers series-quality components—on-site and exactly when you need them. Your benefits: Efficient & Cost-saving: Automated processes reduce personnel costs Fast & Flexible: High throughput for your production Gujdpjxl Ry Ajfx Akajg Industrial Quality: End products in series quality, available immediately Act now: Discover our pre-owned Array systems—inspected, reliable, and offered at attractive prices. ✅ Request your quote now ✅ Immediately available—fast delivery

Condition: used, Year of construction: 1989, Format: 350 x 500 mm Godpfx Akoyzrucoajug

Condition: used, functionality: unexamined, total height: 3,000 mm, total width: 2,400 mm, total length: 3,400 mm, type of input current: three-phase, overall weight: 4,500 kg, input voltage: 400 V, 32 station low vacuum filler with 8 station screw capper Godpfx Asxn Im Sekasug Tooled for 0.5L PET bottle with 38mm cap

Condition: used, functionality: fully functional, Year of construction: 2020, machine/vehicle number: 2426758, load capacity: 227 kg, lifting height: 5,790 mm, platform length: 1,630 mm, platform width: 660 mm, overall weight: 1,312 kg, transport length: 1,780 mm, transport width: 810 mm, transport height: 1,750 mm, fuel type: electric, tire size: 12x4x8, color: red, Technical Data Year of manufacture: 2020 Engine: Electric Working height: 7.79 m Platform height: 5.79 m Platform extension: 0.91 m Platform dimensions (L x W): 1.63 m x 0.66 m Overall dimensions (L x W x H): 1.78 m x 0.81 m x 2.10 m Weight: 1,312 kg Max. load capacity: 227 kg Load capacity with load distribution: 114 kg Travel speed: 1.1 km/h - 3.1 km/h Max. gradeability: 25% Fully operational General used condition Gsdpfoyqy Nxsx Akaeug Delivery available on request Rental available on request