Used Profiling Line For Aluminum And Steel With Shear for sale (39,273)

Condition: used, Twin vertical band saw with log lengthener. Suitable for widths from 70mm to 200mm. Log length from 50cm up to 3.7 meters. Fgsdpjyh Hc Rsfx Ap Dsh

Condition: used, Miter saw for aluminum, EISELE, Type LMS II HVG-225 Machine no. 0107, year of manufacture 1980 Cutting range: 90° = 150 x 100 mm 45° = 120 x 100 mm Saw blade diameter: max. 400 mm Miter cut: +/- 45° Saw blade speed: 1700 / 3400 rpm Motor power: 1.4 / 1.9 kW Power supply: 380 volts, 50 Hz Table size in front of the stop angle: 580 x 350 mm Fodpfx Aszinzrsp Dsgh - Motor type RF 1.5 / 4 / 2-7 - Saw unit for shifting cut, tiltable 45° to the left - Machine equipped with a saw blade for aluminum, Ø 400 mm - Hose connection for chip extraction, Ø 80 mm - Sturdy metal base Space requirement (L x W x H): 1050 x 1020 x 1700 mm Weight: 150 kg In good condition

Year of construction: 1980, condition: used, TAŚMÓWKI FOR FOAM BULLMER WERK 7759 Location Gorzow Wielkopolski. Conditions of delivery Pick your own Cost of delivery Client cover startup type negotiated Description Comments Fgjdpfxjcr Ru De Ap Deh MACHINE FOR CUTTING UPHOLSTERY FOAM ENGINE 1 kW, 220/380 VOLT, HAS A NOSE-STONES TO SAW TAPE LENGTH WITHOUT END 4050 mm, cutting width 1100 mm, table length 2250 mm, table width 1170 mm

Condition: good (used), Year of construction: 1992, Reinforcing steel mesh shears such as guillotine shears, sheet metal shears, sheet metal guillotine shears, hydraulic shears -Manufacturer: Maschinenfabrik Bock, hydraulic plate shear, reinforcing steel mesh shear type 2550 Fgedjyanqvopfx Ap Djh -Cutting width: 2500 mm -Max. cutting capacity: Ø 12 mm double at 100 mm pitch -Motor: Dietz 7.5 kW -Space requirement: 3020/2000/H1320 mm -Transport dimensions: 3130/1080/1465 mm -Weight: 2000 kg

Condition: new, pressure 60,0 t Fsdpfjxcuxqsx Ap Dsgh square edge steel 35,0 mm L-beam 120x120x12 mm round bar steel 40,0 mm punching cross-cut in cmm Ø28 in 15 / Ø38 in 11 mm throat 220 mm flat steel 200x20 / 300x15 mm blade length 317 mm oil volume 45,0 ltr. work height max. 940 / 1140 mm strokes per minute max. 26 work stroke 55,0 mm total power requirement 4,0 kW weight of the machine ca. 1425 kg. Dimensions (HxWxD) 1510 x 590 x 1570 mm Furnishing: - Support table at the hole punch - Support table on the square notcher - foot switch - Bed. Instructions - CE declaration + MUBEA - punch and die holder

Condition: new, 45 to. no. of strokes 24 Hub/min hole diameter in sheet thickness max. Ø 27 in 13 mm 80x80x8 60x60x6 mm flat steel 300x10/200x13 mm 7 mm engine output 2.2 kW range L-W-H 1550x820x1540 mm weight 760 kg Standard equipment: Fsdpfx Apoyv N Aye Dsgh - Complete knife set for flat steel shears - complete knife set for angle steel shears - complete standard punching equipment - Stamp quick release device for punches up to Ø 27 mm - Rectangular notching device complete with hold-down device - notch - Support table for punching device

Condition: good (used), The scope of delivery includes: 1x Sigma profile, used Material color: galvanized Overall length: approx. 850 - 1,050 mm Profile: CS300 The Sigma profiles have been cut on one or both sides! There are different lengths and material thicknesses available, which will not be sorted. Fgedpfehktdlox Ap Dsh General information about the item: This item is offered for collection only. Any additional transport or shipment of this item will incur extra costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: good (used), The scope of delivery includes: 1x U-profile, used Material color: blue Overall length: approx. 1,480 mm U-profile: approx. 50 x 50 mm Material thickness: approx. 3.00 mm Fodpolhqkwjfx Ap Dogh Number of holes: 02 pcs. Hole diameter: approx. 11 mm Weight/piece: approx. 4.930 kg General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 2124, travel distance X-axis: 1,200 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,375 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, spindle speed (max.): 4,000 rpm, 5-axis machine Pallet size: 800 × 800 mm Automatic workpiece change: 5 pallets Fsdpfsyzxyxex Ap Dogh CNC control: FANUC 15M Spindle: 22 kW – 4000 rpm, FANUC Axis motor (20 m/min) + drive: FANUC Tool magazine: 118 tools, type 50, DIN 69871

Condition: good (used), The scope of delivery includes: 01x square tube, used Material color: sendzimir galvanized Total height: approx. 5,560 mm Fjdpfxjrxb R No Ap Dogh Square profile: 140 x 140 mm Material thickness: 4 mm Drill hole grid: 75 x 50 mm Drill hole Ø: 13 mm Note: Some of the square tubes are doubled at a height of 4,910 mm or 5,010 mm are doubled up. Currently available from stock: approx. 101 pcs. Your contact at our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the article: This item is only offered for collection. Any additional transportation or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: ready for operation (used), * Brand: Svedala * Model: steel apron conveyor with hopper * Dim. steel apron conveyor: A-A length 4200 mm * Beltwidth: 1300 mm. Fodpfxjywng Te Ap Degh * Driving: E-motor 11 kW. * Dim. hopper: length 4700 mm - width 3600 mm - height 1900 mm. * Incl.: support chassis and discharge conveyor.

Condition: ready for operation (used), * Brand: ABM / Bergeaud * Model: steel apron conveyor with hopper * Dim. steel apron conveyor: A-A length 10.000 mm * Beltwidth: 860 mm Fgjdpfjywmxuex Ap Djh * Driving: 7,5 kW E-motor * Dim. hopper: length 3000 mm - width 2400 mm. * Height: 1100 mm leading to 900 mm. * Weight: appr. 19 Tons.

Condition: good (used), Compressed Air Line / Pressure Air Line made of aluminium The stated price is for all compressed air pipes together. Total: approx. 325 m of pipe Fgsdjvv Nvnjpfx Ap Deh Sale / delivery of partial quantities is possible!

Condition: like new (used), Your contacts within our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank The scope of delivery includes: 1x CS Sigma profile, used Material color: Sendzimir galvanized Profile length: approx. 1,400 mm CS-Sigma dimensions: approx. 200 x 65 x 18 mm Fgodpfxohwdu Hs Ap Dsh Material thickness: approx. 1.50 mm Weight/piece: approx. 6.500 kg Note: The angles shown in the picture are not part of the offer. General information about the item: This item is offered for collection only. Any further transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery. Our services at a glance: (Prices on request) Assembly, installation Our general assembly conditions apply Rack inspection Rack inspection according to DIN EN 15635, carried out in accordance with the requirements of BGR 234, visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: new, flat steel 350 x 15 mm Fgsdpfsyv Nafsx Ap Dsh round bar steel 35 mm square edge steel 30 mm L-beam 80x80x8 mm hole diameter in sheet thickness Ø 27 in 13 / Ø 20 in 18 mm blade length 356 mm engine output 3.0 kW Stroke rate 34 Punching capacity max. 500 kN weight 950 kg dimensions 1300x1100x1850 mm Standard equipment: - Knife set for flat steel - Complete knife set for angle steel shears - Complete normal punching equipment - Quick release device for punches up to 31 mm - Support table for punching device, rectangular notching and flat steel shears - Bending stamp with matrices V 40 and V 70 - Electric contact stop (1.000 mm)

Condition: used, Year of construction: 1976, round bar steel 28 mm square edge steel 25 mm L-beam 80 x 8 mm notching cap. mild steel max. 7 mm cutting capacity of the vertical shear 350 kN Punch power 190 kN shear: flat material 100 x 11 mm shear: length of knifes ca. 175 mm total power requirement 1,5 kW weight of the machine ca. 0,5 t Fgjdjwm Rmnopfx Ap Doh dimensions of machine L x W x H 1,0 x 0,5 x 1,5 m

Condition: used, The CAT 500 cutting center is an automatic machine designed for cutting PVC profiles using a circular saw. The numerical control unit, together with the management software, allows the programming of machining parameters, leaving the operator with the sole task of loading the bars and unloading the finished pieces. Cutting type: 45° / 90° cutting (left) Adjustable angle cutting Blade specifications: Bore: Ø 30 mm Diameter: Ø 500 mm Speed: 3000 rpm Max thickness: 4.2 mm Technical data: Voltage: 380–400 V AC3PE Current: 8 A Frequency: 50 Hz Power: 3.8 kW Air pressure: 7 bar Weight: 2300 kg Fgodpfx Apoy I Twfj Djh Standard accessories: Carbide blade Ø 500 mm (Ø30 bore) Electro-welded steel structure with leveling feet and floor anchoring Industrial PC on board the machine Motorized profile pusher with brushless motor Motorized blade rotation (left) with brushless motor Feeding belts with inverter and acceleration/deceleration ramps Label printer Dimensions: Loader: 7900 mm MC: 1000 mm Unloading: 2600 mm Pusher: 6500 mm Max width: 2300 mm Max height: 1700 mm

Condition: excellent (used), Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank Included in the scope of delivery: 1x CS Sigma profile, used Material color: Sendzimir galvanized Profile length: approx. 1,650 mm CS-Sigma: approx. 200 x 65 x 18 mm Fsdpfxohwduxe Ap Dogh Material thickness: approx. 1.50 mm Weight/piece: approx. 7,500 kg Note: The angles shown in the image are not included in the offer. General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery. Our services at a glance: (Prices upon request) Assembly, installation Please note our general assembly conditions. Rack inspection Rack inspection according to DIN EN 15635, performed according to the requirements of BGR 234, visual inspection for all racking systems. Delivery with our own fleet (without unloading)

Condition: excellent (used), Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank Included in the scope of delivery: 1x CS Sigma profile, used Material color: Sendzimir galvanized Profile length: approx. 1,750 mm CS-Sigma: approx. 200 x 65 x 18 mm Material thickness: approx. 1.50 mm Weight/piece: approx. 7.950 kg Fsdpfx Apjhvz D He Dogh Note: The angles shown in the image are not part of the offer. General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery. Our services at a glance: (Prices on request) Assembly, installation Our general assembly conditions apply. Shelf inspection Shelf inspection according to DIN EN 15635, performed according to the requirements of BGR 234, visual inspection for all shelf systems. Delivery with our own fleet (without unloading)

Condition: ready for operation (used), For sale: conveyor belt, 15 meters long, belt width 0.65 meters. Robust, fully functional, and ready for use. Fedjylxlbspfx Ap Dsgh Transportation is possible. Itebisyk U Amo Nxphfsc Interested parties are invited to contact us.

Condition: new, Year of construction: 2022, Layout: Shears Attachment suited for: Construction machines Fgjdpepa Rpbefx Ap Deh Metal shear / steel shear for steel cutting for excavators It has been designed for demolishing iron structures and for cutting different structural steels It has some unique properties Replaceable cutting knives Upper head and slewing ring Specially developed hydraulic cylinder The double hose connection For detailed information and price, please contact us

Condition: good (used), functionality: fully functional, Glass jar filling and closing line. 12 filling heads and 4 closing heads. Fsdpfxetqmvre Ap Dogh

Year of construction: 2000, condition: ready for operation (used), This Manni Sandwich Panel Production Line was manufactured in 2000. It features a discontinuous line for sandwich panels with a polyurethane core, including profiling, injection, pressing, cutting, stacking, and packaging stations. Main components include a Manni PMC 291 T press, Cannon H100 RF2 polyurethane injection system, and various Tresam profiling lines. Consider the opportunity to buy this Manni Sandwich Panel Production Line. Contact us for further details regarding this machine. Fedpfx Asx E Ef Nop Dogh Application Types Other Sheet Metal Machinery

Condition: used, dimensions of the machine ca.:1000 x 550 x 1100 m Fodpfocxxqnsx Ap Dogh

Condition: used, For sheet metal thickness up to: 7 mm Blade length: 175 mm Fgsdpfxodp U Apj Ap Dsh Round material up to: 20 mm Square material up to: 18 mm Space requirement: 1000 x 770 x 690 mm Hand-guided