Used Reiden Rx 10 for sale (16)

Condition: excellent (used), 5-Axis Machining Center with swivel milling head, pallet station, tool calibration, thermal compensation, work area extraction system, and much more. Year of manufacture: 2016 Spindle hours approx. 1,500 h (after spindle replacement at the beginning of 2025) Control System: - Heidenhain iTNC 530 HSCI - Heidenhain DCM Collision Monitoring - Heidenhain HR 410 electronic handwheel - Swiveling console with 19" monitor - Teleservice via LAN/WLAN Travel Range: - Travel X 1,000 mm, Y 1,100 mm, Z 810 mm - NC rotary table D 1,000 x 800 mm, swing diameter 1,350 mm Milling Head: - Automatic horizontal/vertical swivel milling head - Fully-fledged stepless NC axis from -1° to +90° - Blowing air through the spindle - External coolant supply via nozzle ring Ijdpfx Ajxhg Disanetr Drive power: 38 kW (100% duty cycle) Speed: 16,000 rpm Torque: 135 Nm at 40% duty cycle Spindle interface: HSK 63-A Media Supply: - Internal coolant feed: 50 bar - capacity 28 l/min - Paper belt filter with additional fine filter - Individual tool pressure regulation during program operation Tool Changer: - Rack magazine with 73 stations (expandable with additional racks) - Swiveling dialog operation panel - Drawer for loading and unloading tools from tool racks Tool Measurement: - 3D wireless touch probe m&h 20.00-Multi, software adapted for HSK 63-A - Including Kinematics-Opt, compatible with iTNC control, and calibration sphere on magnetic stand Pallet Changer: - Double palletizing unit, pallet diameter 1,000 x 800 mm, hole grid 100mm x 100mm, hardened drill bushes D 16mm - Rotary table unit including zero-point clamping system, loading station accessible by crane - Pallet changer unit protected with enclosure Special Equipment: - Micro-Epsilon sensor - For detection and dynamic compensation of thermal spindle growth Chip Conveyor: - Scraper belt conveyor along machine bed - Chip ejection height 1,100 mm Machine Enclosure: - Full-area protective enclosure with large angle door for crane loading and a quick-access door - Easy removal of swarf from the workspace Extraction System: - Oil and emulsion mist extraction, mechanical air filter, extraction capacity 1,800 m³/h Rotating View Window: - Viewing window integrated into the cabin door for workspace observation Camera in Work Area: - Monitor and keyboard at the operator console—allows monitoring of rear-side machining operations Machine Data: - Space requirement (without service area): approx. LxWxH 4,791 mm x 4,100 mm x 4,791 mm (including extraction system) - Machine weight approx. 19,700 kg - Total weight with all equipment plus maximum workpiece load, full tool magazine, and all operating materials: approx. 27,730 kg - Connected load: 50 kVA, 400V, 50/60 Hz This machining center, featuring an exceptionally good and practical configuration, is in very good condition. It operates with the renowned "Swiss precision." There is no service or repair backlog—in fact, the opposite. With an almost new milling spindle, the REIDEN RX 10 5X is well positioned for long-term use. Technical modifications and errors excepted.

Condition: excellent (used), Year of construction: 2018, CNC controller: HEIDENHAIN TNC 640 Axes X-axis travel mm: 2.200 Y-axis travel mm: 2.200 Z-axis travel mm: 1.610 A-axis degrees: +185° Worktable Number of pallets: 4 Itodpfsw Rmplsx Aanor Table dimensions mm: ø1.800x1.400 Maximum workpiece size (D x H) mm: ø2.850x2000 Max. workpiece weight kg: 4.000 Spindle Spindle speed rpm: 15.000 Spindle drive power kW: 63/73 (100/40%ED) Spindle torque Nm: 300/348 (100/40%ED) Cooling Cooling through the Spindle Center bar: 80 (Form A) Tank capacity: 2.500 Tool system Tool holder: HSK-100A Tool magazine slots: 304

Condition: excellent (used), Year of construction: 2014, operating hours: 8,000 h, CNC controller: HEIDENHAIN TNC640 Axes X-axis travel mm: 1.800 Y-axis travel mm: 1.800 Z-axis travel mm: 1.210 A-axis degrees: -15°+105° Worktable Table dimensions mm: ø1.400x1.200 Spindle Spindle speed rpm: 15.000 Ijdpfx Aov Eqqxsanetr Tool system Tool holder: HSK-A100 Tool magazine slots: 92 Machine running times Under power: 17.991 Spindle Working: 8.028

Condition: used, Description Digital display (3 axis) Technical data: Clamping surface 1100 x 300 mm Longitudinal travel 700 mm cross travel 250 mm Itedpe Twi Hefx Aanjr Vertical travel 470 mm Spindle speeds 45 - 2000 rpm. ISO 40 mounting 12 milling feeds Longitudinal and transverse 18 - 800 mm/min. vertical 7,2 - 320 mm/min. Drive motor of the milling spindle 7 PS Drive motor of the table 1,5 PS Machine weight approx. 2050 Kg

Condition: good (used), Year of construction: 2000, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 700 mm, - CNC control Heidenhain TNC426 - swivable milling head (horizontal / vertical) - NC-rotary table (C-axis) - tool changer for 32 tools - chip conveyor Iodpotiw Egsfx Aanotr - electronical hand wheel - coolant device (coolant through spindle device 20bar) Technische Daten / technical details: Verfahrweg X längs / X-Travel longitudinal 1200 mm Verfahrweg Y quer / Y-Travel cross 600 mm Verfahrweg Z vertikal / Z-Travel vertical 700 mm C-Achse Rundtisch / C-axis rotary table 360 ° Fräskopf / milling head +-90 ° Rundtischgröße / rotary table size 800 mm Werkzeugschaft / spindle taper SK40 Drehzahlbereich 2-stufig / spindle speed (2-steps) 20-6300 UpM /rpm Anzahl der Werkzeugplätze / tool places in ATC 32 fach Antriebsleistung Spindel 100%ED / drive capacity spindle 100%ED 11 kW Gewicht der Maschine ca. / weight 9000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 2003, x-travel 3.000 mm y-travel 1.000 mm z-travel 1.500 mm control Heidenhain TNC 430 spindle tunring speed 5.000 U/min tool taper SK 50 number of tool places 40 Pos. Number of working hours ca. 15.829 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Automatic swivel head with B-axis, infinitely variable - Internal coolant supply 20 bar - Air blower through spindle - Chip conveyor - Chip flushing Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Itsdjxylqropfx Aaner Technical data and specifications are subject to change without notice. Prior sale reserved.

Condition: good (used), Year of construction: 1971, Table clamping surface: 1,800 x 500 mm X-axis travel: 1,250 mm Y-axis travel: 355 mm Z-axis travel: 510 mm Iodpfx Asxwmwneanjtr Spindle speed: 22 – 1,250 rpm Spindle taper: ISO 50 Weight: 5,900 kg

Year of construction: 1970, condition: used, Center lathe Reiden R200 Center height 200mm center width 1000mm 380V Itjdshtaauspfx Aanor speed 16 - 1580 rpm

Condition: used, Technical details: Isdpfx Aju N D Ipsanotr floor-plate length: 4000 mm plate width: 1300 mm plate height: 190 mm Plate thickness: 95 mm weight of the machine ca.: 4,15 pro Platte t transport dimensions LxWxH: ca. 4,0 x 1,3 x 0,2 / pro Platte m very good steel plate for sale free, packed in oiled paper and foil AP 4000x1300 - ground steel plate Ra 0.8 Surface ground Ra 0.8 according to drawing T-slots according to DIN 650: a=36; h=65; b=60 c=26mm, chamfered approx. 1.5mm Distance from edge: 100mm; center distance: 100mm (without attached 4x stop swivel) *

Condition: used, Year of construction: 2003, x-travel 2.000 mm y-travel 1.000 mm z-travel 1.200 mm control TNC 430 Heidenhain turning speed range - main spindle 20 - 5.000 min/-1 transmission ratio 2 power capacity - main spindel 30 (100%) / 45 (40%) kW Torque 1.050 / 1.580 Nm tool taper HSK 100 swivellable B: +/- 180 ° indexing B: 0,001 ° table surface area 1.000 x 2.000 mm max. table load 4.000 kg flute distance 100 mm T-slots 18 H7 number of T-slots 10 number of toolpositions 40 pos. tool taper HSK 100 tool changing time 10 sec max. tool diameter 250 mm max. tool length 400 mm Iodpfx Aexmag Ijanotr max. tool weight 20 kg feed speeds X,Y,Z: 0 - 20.000 mm/min feed speeds B: 10 1/min output X,Z: 15,7 / Y: 8,5 kW output B: 2,5 kW feed power 22'500 N weight of the machine ca. 23 t dimensions of the machine ca. 8,0 x 8,0 x 3,3 m 4-Axis CNC Machining Center - Universal REIDEN - BFR 22 - incl. 2x tool cabinets for collets - incl. 3x pull-out cupboards - incl. 1x workbench - incl. Ringler chip extractor

Condition: good (used), Swing over bed 425 mm Distance between centers 1500 mm Spindle speeds 36-2240 rpm Itedpfshz D Eusx Aansr Misc. accessories MARCELS MASCHINEN CH

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 700 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 426 M, spindle speed (max.): 6,300 rpm, TECHNICAL DETAILS x-path: 1,200 mm y-path: 600 mm z-path: 700 mm Axes: 4 Speed: 20 - 6300 rpm Itedpfowurwqjx Aansr Control: HEIDENHAIN TNC 426 M Table load: 800 kg Work table dimensions: 1,200 x 630 mm Tool holder: SK40 MACHINE DETAILS Machine height: 2,950 mm Machine weight: approx. 8,800 kg

Condition: good (used), -Digital display Fagor. -Accessories available. Tip height 200 mm Top width 800 mm Turning diameter over slide/bed 240/425 mm Length of the bend of the Planscheibem with 4 JAWS 180 mm Spindle bore 51 mm Inner cone 60 metric Recording camlock D6 " Speed 45-2240 Rev/min The lead screw pitch 6 mm Tailstock spindle mount MT 4 Diameter of tailstock Quill 70 mm Quill: 200 mm stroke Feeds: Along 0.05 2.8 mm / Rev Plan 0.05 2.8 mm / Rev Rapid traverse: LW Thread pitches: Metric 0.5 14 mm English 2-56 U/1 " Module 0.125 3.5 Motor 380 Volt, 12.5 HP Ijdpfx Aaod In Ixjnstr Machine dimensions: B x T x H 2400 x 1200 x 1800 mm Weight 2100 kg

Condition: used, Year of construction: 2006, CNC Heidenhain TNC530 X/Y/Z 1,500/800/1,000 mm Swivel axis 0-180° A-axis C-axis B-axis Max. workpiece weight 1,500 kg Machine weight 18,000 kg Itedpfxswutxis Aanor

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,200 mm, spindle speed (max.): 5,000 rpm, Equipment: chip conveyor, TECHNICAL DETAILS Travel X-axis travel: 2,000 mm Y-axis travel: 1,000 mm Z-axis travel: 1,200 mm Main Spindle Speed range: 20 - 5,000 rpm Gear stages: 2 Drive power: 30 kW (100%) / 45 kW (40%) Torque: 1,050 Nm / 1,580 Nm Tool holder: HSK 100 B-axis swivel range: +/- 180° B-axis increment: 0.001° Work Table Clamping area: 1,000 x 2,000 mm Max. table load: 4,000 kg T-slot spacing: 100 mm T-slots: 18 H7 Number of T-slots: 10 Tool Magazine Number of tool positions: 40 Tool holder: HSK 100 Tool change time: 10 s Max. tool diameter: 250 mm Itedpfjxb A Azjx Aansr Max. tool length: 400 mm Max. tool weight: 20 kg Feed Rates Feed rate X, Y, Z: 0 - 20,000 mm/min Feed rate B: 10 min⁻¹ Power X, Z: 15.7 kW Power Y: 8.5 kW Power B: 2.5 kW Feed force: 22,500 N MACHINE DETAILS Space Requirements & Weight Space requirement approx.: 8.0 x 8.0 x 3.3 m Machine weight approx.: 23,000 kg EQUIPMENT 2x tool cabinets for holders Ringler chip extractor Chip conveyor Coolant system High-pressure cooling Internal coolant supply Oil mist extraction Paper band filter Spindle oil cooler Blum TC 60 probe Electronic handwheel Automatic door

Condition: excellent (used), Accessories available. Centre height 200 mm Center distance 1500 mm Turning Ø via slide 235 mm over bed 425 mm over bend 470 mm Speed Stepless 45 - 2240 rpm Spindle bore 45 mm Ø of the tailstock sleeve 55 mm Morse taper of spindle and tailstock MK 4 Itsdsfkn S Rjpfx Aanor