Used Protec 3 Achs Welding Table for sale (82,391)

Condition: used, maximum load weight: 31,710 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 10/2016, total width: 2,550 mm, Equipment: ABS, You can find our entire range of vehicles, including immediately and short-term available units, on our website. Csdpfx Aaoy Dy Eho Njrb Excerpt from the equipment features. Complete specification available on request. - Wedge-shaped chassis with increased point load capacity, approx. 25,000 kg over approx. 5,000 mm - 24,000 kg telescopic support winches with load and fast operation modes - Lashing positions available in 5,000 kg, 6,000 kg, and 10,000 kg configurations - 8 stake pocket inserts (for 2nd bulkhead) - Aluminum roof girders with sliding tarpaulin - Rear stakes extendable to approx. 3,500 mm (for loading and unloading only) - Three sliding stanchions on each side - End stanchions extendable lengthwise in direction of travel - Complete front wall designed as storage compartment with integrated shelving system, interior closed - DINKEL mechanical lifting roof, height-adjustable, lifting roof height 400 mm, operable from both sides or one side only - Additional height adjustment of 480 mm in 40 mm increments (12 x 40 mm) via stanchion height setting - Trailer can be driven under tarpaulin up to total height of approx. 4,400 mm (rear open over tail lift) - Upper rear portal crossbar with movable sliding tarpaulin - Four rows of stackable 150 mm aluminum slats on each side (two rows in upper bunk only), 450 mm pockets at bottom, four rows of pockets above, evenly spaced intervals - WABCO compressed air brake system with EBS to EC Standard 71/320 EEC incl. PREV - ECAS air suspension with raise/lower function - Wabco Smart Board with axle load display and hubodometer - 3 x 10,000 kg SAF axles with drum brakes - 3rd axle: friction-steered trailing axle - 1st axle liftable - Tires: 235/75 R 17.5 - Dhollandia heavy-duty tail lift, type DHLSU, load capacity 9,000 kg, load center 1,000 mm, steel platform approx. 3,000 x 2,500 mm - Hydraulic auxiliary stabilizers with automatic ground leveling - Tail lift with ramp function for inclined platform setup, usable as loading ramp – loadable up to max. 13,500 kg - Chassis painted in MB nova grey - White bodywork with customer-specific tarpaulin lettering

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 9,000 mm, loading space width: 2,430 mm, loading space height: 2,300 mm, loading space volume: 50 m³, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, KEMPF SKM 36/3 AK – 3-Axle Aluminum Tipper Semi-Trailer 50m³ – New Vehicle ----Vehicle Data Manufacturer: Fahrzeugbau KEMPF GmbH * Model: SKM 36/3 AK * Design: 3-axle tipper semi-trailer with aluminum box body * Target market: Germany * Permissible total weight: 36,000 kg * Axle load: 3 × 8,000 kg * Fifth wheel load: approx. 12,000 kg * Nominal coupling height, loaded: approx. 1,200 mm (technically possible 1,200–1,260 mm) * Loading length: approx. 9,000 mm * Loading width: approx. 2,430 mm * Body height: approx. 2,300 mm * Body volume: approx. 50.3 m³ * Total height: approx. 3,710 mm to loading edge (loaded) ----Paint / Design Chassis: Deep black RAL 9005 * Attachments: hot-dip galvanized and black powder coated * Axles and wheel hubs: black (KTL-coated) * Body: White aluminum RAL 9006 * Tarpaulin: Silver No. 911 (Mehler) * Contour marking on sides (white) and rear (red) according to EC directives ----Chassis and Running Gear Frame: High-quality welded construction from fine-grained steel, conically cranked (approx. 80 mm) * Axles: SAF INTRADISC plus Integral – offroad version, disc brakes Ø 430 mm * Lift axle: 1st axle fully automatic, liftable, with forced lowering when empty * Air suspension: Air suspension assemblies with small air bellows (300 mm), plastic covers * Air tanks: Aluminum version * Support legs: 2 aluminum drop legs, max. 24 t (2 × 12 t) * Mudguards: PVC half-shells with rigid spray suppression * Toolboxes: 2 pieces PVC, black, each approx. 660 × 500 × 460 mm * Side underrun protection: right side * Ladder: removable, aluminum, approx. 4,000 mm long * Access ladder: extendable at the rear (not UVV compliant) ----Underrun Protection and Rear Foldable steel underrun protection according to ECE R58.03 Cedexn Eb Hopfx Aa Nsrb * With spring lifting aid and integrated tow eye * Continuous KEMPF splash guard with large reflective panel (200 × 1,130 mm) ----Lighting and Electrics Complete LED version according to ADR standard * Marker, position, reversing, and rear fog lights in LED * 2 LED work lights (left/right) * Cargo area lighting with switch and indicator lamp * 15-pin electrical connection * Round lamps with chrome rings * Without reversing camera ----Tires Rims: Alcoa Ultra ONE alloy wheels, Dura-Bright EVO, offset 120 * Tires: 385/65 R 22.5, brand according to Kempf's choice ----Braking System and Safety Electronic braking system (EBS) Wabco with RSS (Roll Stability Support) * ABS 4-channel (4S/2M) * Parking brake via spring-loaded cylinders * Axle load display via EBS CAN bus (display in cab possible) * Trailer information module SmartBoard (Wabco) * Tire pressure monitoring system (TPMS) according to ECE R141 ----Hydraulics Hydraulic front tipping cylinder (Hyva), operating pressure 190 bar, single-circuit hydraulic system * Smallest piston hard-chromed * Hydraulic connection: Edbro 1" quick coupling, screwed ----Superstructure / Body Aluminum rear tipper body made of hollow profiles * Front wall: 20° sloped, approx. 5 mm thick, with robust brackets for front press * Floor: approx. 7 mm thick, annealed aluminum * Side walls made of aluminum hollow profiles, continuous inner lining 2.5 mm, welded * Rear wall: straight, pendulum type, two-wing (2/3 left, 1/3 right), automatic pneumatic locking * Rear wall control: left switch (pendulum function), right switch (door function) * Grain-tight design * Slide: approx. 400 × 400 mm, lever operated to the left * Dust bag with adapter frame (hopper approx. 250 mm high) * Catwalk with handrail acco

Condition: used, empty load weight: 5,580 kg, maximum load weight: 13,220 kg, overall weight: 18,800 kg, axle configuration: 1 axle, first registration: 01/2022, next inspection (TÜV): 04/2027, loading space length: 11,070 mm, loading space width: 2,480 mm, loading space height: 2,485 mm, loading space volume: 68 m³, total length: 11,070 mm, suspension: air, tire size: 315/70 22,5, tire condition: 90 %, color: green, Year of construction: 2021, front tire size: 315/70 22,5, rear tire size: 315/70 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, tail-lift, truck registration, Reference number for inquiries: 41144 Spier, box body * Year of manufacture: 2021 * ABS (Anti-lock Braking System) * EBS (Electronic Braking System) * Tail lift * Air suspension * Fixed roof * Air connection coupling head (red & yellow) * 15-pin connector plug * Raise and lower device * Inspection (TÜV/Emissions): 04/2027 * Suspension: Air * Gross weight: 18,800 kg * Unladen weight: 5,580 kg * Payload: 13,220 kg * Permissible gross weight: 18,800 kg * Axle manufacturer: SAF * Tire condition, 1st axle: 90% | 90% -- 90% | 90% - Tire size: 315/70 R22.5 * Tire sizes: 315/70 R22.5 * Internal dimensions: L = 11,070 mm, W = 2,480 mm, H = 2,485 mm * Internal volume: 68 m³ * Pallet spaces: 27 * Large Palfinger tail lift: MBB 3000 S - 3 tons * 5-row load securing rails * Lashing rails in floor and ceiling * Telescopic rods * Reversing camera * Translucent roof * Side door * In excellent condition * Highlight: TÜV until 04/2027 / top condition / 3 ton tail lift Liability disclaimer: Cedoy Dar Uopfx Aa Nsrb Subject to change, prior sale and errors excepted. You can find more photos and videos on our homepage. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast, straightforward financing * Application for all (export) documents * Ordering of export license plates / customs plates * Vehicle preparation: new tarpaulins, signage, painting, etc. * Professional loading / load securing * TÜV approvals, registration service * Transfer of commercial vehicles Contact our trained professional staff, we are happy to advise you.

Condition: new, Year of construction: 2025, functionality: fully functional, load capacity: 1,000 kg, Column lift rotary device 1 tonne load capacity Protec turning device / positioner Syncrolift Double column, remote control wireless and manual Column adjustment: 2x movable Load capacity: 1000 kg Minimum working height: 600 mm Maximum working height: 1500 mm Speed: 1 rpm Clamping plate diameter: 500 mm Rotary drive: 0.37 kW Upon request, 2 to 10 tonne load capacities available Csdpfxex Th N Hs Aa Nsrb

Year of construction: 1960, condition: good (used), machine/vehicle number: 970015, Load capacity with horizontal faceplate position: 10 t Load capacity with vertical faceplate position and centre of gravity distance 300 mm: 10 t Load capacity with vertical faceplate position and centre of gravity distance 830 mm: 5.5 t Face plate dimensions: 1500 x 1500 mm face plate speed hydraulically infinitely variable: 0,025 - 0,75 rpm Crjdjcblc Sjpfx Aa Neb Pivoting range: 0 - 135 Swivel time for full swivel range to: 140 s Swivel time for full swivel range down: 120 s Hydraulic drive: 380 V Height of swivel axis above floor: 1450 mm space requirement: 3800 x 1950 x 1800 mm Weight approx.: 3,5 t Weight of the counterweight: 2,3 t

Condition: repair required (used), Year of construction: 2002, Welding robot with 6 axes Rotary table for workpiece holding 6th axis defective KPS module defective Crjdpfx Aasywlgko Njb

Condition: new, neu ca. 3-6 Wochen ab Auftrag Türkei 5010 € 96.69 € 100 kg 150 mm 150 mm 360 ° 120 kgm 230 / 50 V / Hz Cedpfxjx Urqwe Aa Norb 0.25 kW 0.25 kW 0.1 - 3 U/min 30 s 350 mm M12x6 mm 690 mm The positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted on the floor. The tables have radial T-slots that enable quick clamping of the workpieces. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. Foot pedal Cable for signal to welder Touchpanel for following functions: - rotation speed - operating modi (manual, segmentcycle, full circle) OPTION: Pneumatic centering attachement

Condition: new, neu ca. 3-6 Wochen ab Auftrag Türkei 24400 € 468.48 € 3000 kg 150 mm Cjdpfxex Urqdo Aa Njrb 150 mm 360 ° 135 kgm 400 / 50 V / Hz 1.1 kW 1.1 kW 1200 mm 700 - 950 mm The hydraulic positioners are available in standard sizes for load capacities from 1.000 kg to 3.000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted to the floor. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. The rotation speed can be adjusted via a potentiometer.

Condition: ready for operation (used), T-slot assembly table, T-slot table, T-slot welding table, Used machine Overall dimensions: Length: 740 mm Csdpfxov Il Evs Aa Nsrb Width: 550 mm Height: 540 mm Weight: 398 kg T-slot size: 50 x 20 mm Worktable size: Upper part: 660 x 550 mm Side part: 650 x 400 mm Worktable tiltable at 90˚

Condition: used, Work table with "swallowtail" fixed cuttings Overall size:1100x1400x800 mm Weight: 1880 kg Cjdpfxshyxa Aj Aa Nsrb

Condition: new, maximum load weight: 32,155 kg, overall weight: 39,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete stock of vehicles, including those available immediately and at short notice, on our website. Excerpt from the equipment list. Full specifications available on request. Chassis: * Welded construction made from high-quality steel profiles with thru-profile cross members. Designed for high point loads. Coupling device: * Fifth wheel plate with 2-inch kingpin Underrun protection: * According to EC regulations, bolted design Side guard: * According to EC regulations Landing legs: Credpfx Aajy Auhzj Neb * 2 x 12 t landing legs with compensation foot and single-sided operation on the right in direction of travel Axles: * 3 x 9 t air suspension axle assembly, SAF brand, with disc brakes approx. 430 x 45 mm, wheel fixing mid-centered ET120, ABS, total air suspension lift approx. 180 mm, of which lift approx. 110 mm and lower approx. 70 mm * Air suspension operated via hand control valve with stop function Steering: * Last axle forcibly steered by linkage Axle lift: * First axle liftable, with fully automatic, load-dependent lift control Brake system: * Two-line compressed air brake system according to EC regulations with EBS and RSS, automatic load-dependent control, spring actuators as parking brake, anti-mix couplings fixed to front cross member, without connecting line to motor vehicle * Wabco brand Tyres: * Sixfold, 385/65 R22.5 160J on rim 11.75 x 22.5 ET 120 - brand at our discretion. Incl. tire pressure monitoring system, tire pressure display in cab (pre-installed by chassis manufacturer) Mudguards: * According to EC regulations, 1/4 PVC mudguards in front of and behind axle assembly Load securing: * 9 pairs of folding lashing rings, evenly distributed (tensile force approx. 8.0 t) * 8 pairs of folding lashing rings, evenly distributed (tensile force approx. 2.5 t) * Drilled holes in outer frame every approx. 500 mm for lashing straps (straps can be hooked in with closed drop sides, beveled outer frame) Stake pockets: * 10 pairs of stake pockets in the outer frame, evenly distributed * 4 rows of stake pockets across the loading platform * Plug-in stakes: 20 galvanised tubular stakes approx. 80/50 mm, total length approx. 1,000 mm * Magazine for 20 plug-in stakes on the inside of the front wall Front bulkhead: * Reinforced steel bulkhead, fixed, interior covered with approx. 9 mm phenolic plywood floor (approx. 1,250 mm high) Floor: * Approx. 28 mm Z-hardwood floor, recessed into the outer frame Side walls: * 4 x 250 mm side walls and rear wall made of anodised aluminium hollow sections, foldable and removable, removable Kinnegrip stakes * Side wall and stake magazine under the chassis * Left and right insertion rails for side walls and stakes Lighting system: * According to EC regulations, 24 Volt with multi-chamber lights, LED side marker lights, LED position lights front white, LED outline marker lights at rear, license plate lights * 1x 15-pin and 2x 7-pin plug sockets on front cross member Equipment: * Two wheel chocks with holders * Warning signs according to ECE 70 * Work spotlight on lamp bracket (operated via reverse gear) * Holder for rotating beacon at rear, incl. beacon * 2 x stainless steel toolboxes, approx. 600 x 500 x 500 mm Paintwork: * Chassis and front bulkhead sandblasted, primed and coated in a single colour * Chassis: hot-dip galvanised + RAL colour of choice * Front bulkhead: RAL colour of choice * Side walls: anodised aluminium * Top stakes front bulkhead: hot-dip galvanised * Hubs: KTL blac

Condition: new, neu ca. 2 Wochen ab Auftragse 5442 € 105.03 € Crsdpfxjyq Sumo Aa Nob 28 mm Accessory set consisting of: 14 pcs. screw clamp180° HIS28Z3000 8 pcs. screw clamp45° HIS28Z3045 6 pcs. V-support HIS28VP100 30 pcs. quick clamping bolt shortHIS28SB100 6 pcs. connection bolt HIS28BS100 4 pcs. mangnetic bolt HIS28MB100 8 pcs. stop rail 150mm HIS28FA150 8 pcs. stop rail 225mm HIS28FA225 2 pcs. stop rail 500mm HIS28FA500 6 pcs. stop angle 175mm HIS28WA175 1 pc. stop angle 325mm HIS28WA325L 1 pc. stop angle 325mm HIS28WA325R 1 pc. support angle 600mm HIS28W600L 1 pc. support angle 600mm HIS28W600R 1 pc. support angle 800mm HIS28W800L 1 pc. support angle 800mm HIS28W800R 1 pc. cleaning brush Nylon HIS28RB 1 pc. torch holder HIS28BH 1 pc. tool cart HIS28WW1000 and 1 care set (consisting of 1 pc. HIS-Cleaner-1L and HIS-Premium-1L)

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 995 € 1200 x 800 mm 150 kg 16 mm Credpfeyq Sugex Aa Nsb THIS MODEL IS DESIGNED FOR BEGINNERS AND FOR PROCESSING LIGHTER AND SMALLER WORKPIECES. Our tables are characterised by the high degree of hardness with our Cr75M+ hard chrome plating, the very high degree of accuracy of +/- 0.05 mm on the entire table surface and the tolerances of the hole diameters of the entire hole pattern. 2D standard welding and clamping table, 1200 x 1200 with Cr75M+ hard chrome plating Table system: 16 mm Material thickness: 12 mm Including table substructure and standard table legs * S355J2+N with Cr75M+ hard chrome plating * Hole: 16 mm, material thickness: 12 mm * Including coated table substructure * Table top with 2-sided fine scaling and 50 x 50 mm grid line * Rounded edges and holes * Solid standard table legs with load capacity 1 tonne per leg; 500 kg per leg for castor model

Condition: new, Year of construction: 2025, neu 2025 020157 prompt, Zwischenverkauf v Türkei 6320 € 121.98 € 1 250 kg 150 mm 150 mm 360 ° 360 kgm 230 / 50 V / Hz 0.37 kW 0.25 kW 0.1 - 3 U/min 30 s 600 mm M16x6 mm 550 mm The positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted on the floor. The tables have radial T-slots that enable quick clamping of the workpieces. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. Foot pedal Crodpfx Aoyq St Nsa Nsb Cable for signal to welder Touchpanel for following functions: - rotation speed - operating modi (manual, segmentcycle, full circle) OPTION: Pneumatic centering attachement

Condition: new, neu ca. 3-6 Wochen ab Auftrag Türkei 11000 € 211.2 € 1000 kg 150 mm 150 mm 360 kgm 230 / 50 V / Hz 0.55 kW 0.75 kW 0.1 - 3 U/min Cjdeyq St Aspfx Aa Nerb 60 s 1200 mm M20X6 mm 1000 mm The positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted on the floor. The tables have radial T-slots that enable quick clamping of the workpieces. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. Foot pedal Cable for signal to welder Touchpanel for following functions: - rotation speed - operating modi (manual, segmentcycle, full circle) OPTION: Pneumatic centering attachement

Condition: new, neu ca. 3-6 Wochen ab Auftrag Türkei 7730 € 149.19 € 500 kg 150 mm 150 mm 360 kgm 230 / 50 V / Hz 0.37 kW 0.37 kW 0.1 - 3 U/min 45 s 800 mm M20X6 mm 640 mm The positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted on the floor. The tables have radial T-slots that enable quick clamping of the workpieces. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. Foot pedal Cable for signal to welder Cjdpfxeyq Stvo Aa Nsrb Touchpanel for following functions: - rotation speed - operating modi (manual, segmentcycle, full circle) OPTION: Pneumatic centering attachement

Condition: new, neu ca. 2 Wochen ab Auftragse 3165 € 28 mm Accessory set consisting of: 8 pcs. screw clamp 180° HIS28Z3000 4 pcs. screw clamp 45° HIS28Z3045 Cedpfx Aaeyq Sq Is Norb 4 pcs. V-support HIS28VP100 20 pcs. quick clamping bolt short HIS28SB100 4 pcs. connnection bolt HIS28BS100 2 pcs. manetic bolt HIS28MB100 4 pcs. stop rail 150mm HIS28FA150 6 pcs. stop rail 225mm HIS28FA225 4 pcs. stop angle 175mm HIS28WA175 2 pcs. stop angle 275mm HIS28WA175275 1 pc. stop angle HIS28WA325L 1 pc. stop angle HIS28WA325R 1 pc. support angle 800 HIS28W800L 1 pc. support angle 800 HIS28W800R 1 pc. cleaning brush Nylon HIS28RB 1 pc. torch holder HIS28BH and 1 care set (consisting of 1 pc. HIS-Cleaner-1L and HIS-Premium-1L) OPTION: Tool cart HIS28WW1000 € 545,--

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 2590 € 16 mm The set for everyday and universal use with an extensive range of clamps, brackets and clamping options. Including tool trolley for an optimised and fast workflow. Consisting of: 10 screw clamps 180° HIS16Z3000 4 screw clamps 45° HIS16Z3045 4 V-support HIS16VP100 8 stop brackets 90x37, 5mm HIS16WA9037 8 pieces stop bracket 90x90mm HIS16WA9090 2 pieces stop bracket 300mm HIS16WA300 1 piece stop bracket 500mm HIS16WA500L Codpfeyq Sqhex Aa Norb 1 piece stop bracket 500mm HIS16WA500R 4 pieces stop bar 75mm HIS16FA075 8 pieces stop bar 115mm HIS16FA115 28 pieces quick clamping bolt short HIS16SB100 1 piece cleaning brush HIS16RB 1 piece torch holder HIS16BH 1 piece cleaner HIS- Cleaner-1L 1 piece Anti-stick agent HIS-Premium-1L

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 1725 € 16 mm The extended entry level with added value in the set configuration for the most common work steps and applications. Consisting of: 8 screw clamps 180° HIS16Z3000 2 screw clamps 45° HIS16Z3045 2 V-support HIS16VP100 4 stop brackets 90x37, 5mm HIS16WA9037 6 pieces stop bracket 90x90mm HIS16WA9090 2 pieces stop bracket 300mm HIS16WA300 2 pieces stop bar 75mm HIS16FA075 8 pieces stop bar 115mm HIS16FA115 20 pieces quick clamping bolt short HIS16SB100 1 piece cleaning brush HIS16RB 1 piece torch holder HIS16BH Cedpfxoyq Sqbj Aa Njrb 1 piece cleaner HIS-Cleaner-1L 1 piece anti-adhesive agent HIS-Premium-1L OPTION: Tool trolley HIS16WW1000 € 449,--

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 929 € 16 mm Starter set for anyone who wants to work professionally and efficiently contains the most important tools as basic equipment. Consisting of: 4 pieces screw clamp 180° HIS16Z3000 4 pieces stop bracket 90x37.5mm HIS16WA9037 Crsdpfx Aoyq Sp Rsa Neb 4 pieces stop bracket 90x90mm HIS16WA9090 4 pieces stop bar 115mm HIS16FA11512 pieces quick clamping bolt short HIS16SB100 1 piece cleaning brush HIS16RB 1 piece torch holder HIS16BH 1 piece cleaner HIS-Cleaner-1L 1 piece anti-adhesive agent HIS-Premium-1L OPTION: Tool trolley HIS16WW1000 € 449,--

Condition: used, gebraucht 2468D prompt, Zwischenverkauf v Deutschland 2970 € 1 1890 € 195 kg 28 mm DEMO SET / MINT CONDITION consisting of: * 1x accessories car (Delivery is galvanised) * 4x angle stop 350 x 20 mm * 4x adjustable angle stop 250 x 20 mm * 15x Adjustment clamp * 4x Multi-clamp * 6x Stand angle, adjustable 175 x 20 mm * 2x Stand angle, adjustable 225 x 21 mm * 8x Stop rail 225 x 20 mm * 10x Socket bolt * 15x Plug holder * 3x Ball Tension Bolt * 4x Claw clamping bolt 28 x 100 mm * 15x Spacer ring Crsdpeyq Spqsfx Aa Neb

Condition: like new (used), functionality: fully functional, load capacity: 2,000 kg, Demmeler Robotix L Manipulator 3-Axis 360° rotation, 360° tilting (overhead), with height adjustment (virtually silent) Excellent condition (like new) Minimum height: approx. 486 mm (tilting axis 0° horizontal) Maximum height: approx. 1438 mm (tilting axis 0° horizontal) Credpfx Aoyupl Dsa Njb Minimum height: approx. 525 mm (tilting axis vertical) Maximum height: approx. 1477 mm (tilting axis vertical) Lower arm length 1500 mm (radius) Upper arm length 1900 mm (radius) Connection: 16 A plug Overall height 3250 mm Rotational speed approx. 0.2 - 2.0 rpm Torque 24000 Nm Lifting speed 1.5 m/min Handheld remote control

Condition: excellent (used), functionality: fully functional, load capacity: 1,500 kg, Equipment: foot remote control, 3-axis PEMA welding positioner APS 1500 - stepless height adjustment - includes hand-held remote control - maximum load 15,000 N (1,500 kg) - rotation speed 0.07 - 1.3 rpm - rotational torque 1,000 Nm - hydraulic tilting up to 135° - tilting torque 3,000 N - max welding current 700 A - plate diameter 700 mm - height 780 - 1,550 mm - dimensions 1,640 x 810 mm - power supply 3 x 400 V / CEE 16A Cedpfx Aeyupd Hsa Njrb - weight 730 kg

Condition: ready for operation (used), Perforated plate Manufacturer unknown Dimensions 1500x1500mm Working height 940mm --height adjustable-- Screwed feet Plate thickness 110mm Hole diameter 45mm Codpsfpgp Esfx Aa Nerb Weight approx. 2.0 tons

Condition: new, maximum load weight: 39,070 kg, overall weight: 45,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Partial list of features. Full equipment details available upon request. Chassis: * Welded construction made of high-quality steel profiles with continuous profile cross-members, designed for high point loads * Outer frame as UNP profile * Fifth wheel plate approx. 8 mm, underride guard nose approx. 700 mm wide Coupling device: * 2-inch kingpin (also prepared for 3.5-inch) Underrun protection: * According to EC regulations, bolted design Side underrun protection: * According to EC regulations Landing gear: * 24 t landing legs with single-sided operation (approx. 66 t test load), Jost Modul CH (Heavy Duty) S-foot Axles: * 3 x 9 t air suspension axle units, brand SAF, with disc brakes approx. 430 x 45 mm, ABS, hub-piloted with 10-lug ET 120, total air suspension stroke approx. 200 mm (approx. 140 mm lift, approx. 60 mm lower), control via rotary slide valve with detent, with RTR function * Switch for second ride height (+ approx. 50 mm) on the holder of the lift/lowering device * Smartboard/TIM/Infocenter, without TPMS display Lift axle: * First axle liftable, with fully automatic load-dependent lift control, start aid via button in driver's cab (15-pin socket PIN12). Button in cab not included in delivery Brake system: * Two-line compressed air braking system according to EC regulations with EBS and RSS, automatic load-dependent control, spring actuators as parking brake, non-interchangeable coupling heads permanently mounted on the front cross beam, without connecting line to the tractor, brand Wabco Tyres: * 6 units, 385/65 R22.5 160J on 11.75 x 22.5 rims (brand at our discretion), ET 120 * Basic tyre pressure monitoring, connected to the CAN-bus system of the EBS * Tyre pressure monitoring display in driver's cab (prepared by the tractor manufacturer) Mudguards: * According to EC regulations, PVC mudguards (half-shells) over all axles * Anti-spray mud flaps Load securing: * 8 pairs of hook plates welded into the outer frame (traction approx. 3 t) * 6 pairs of lashing rings on the side of the outer frame, evenly distributed (traction approx. 10 t) Stake pockets/stakes: * 5 pairs of stake pockets recessed in the outer frame, approx. 90 x 90 x 4 mm * 3 pairs of stake pockets recessed in the loading floor, approx. 90 x 90 x 4 mm * 10 plug-in stakes made of galvanized square tubing, approx. 80 x 80 x 4 mm, with bottom stop Front wall: * Bolted front wall, approx. 1,200 mm high, metal plated Stake magazine: * Magazine for plug-in stakes inside the front wall Floor: * Approx. 28 mm hardwood floor recessed in the outer frame, with galvanized omega steel profiles Lighting system: * According to EC regulations, 24V with multi-chamber lights, LED side marker lights, LED position lights (white, front), LED outline marker lights (rear), license plate lights * 1x 15-pin and 2x 7-pin connectors on the front cross beam Equipment: * Warning sign according to ECE 70 * 2 LED work lights mounted on the lamp bracket (switched via reverse gear) * Bracket for rotating beacon at the rear (incl. beacon) Codpfx Aoyz E T Sea Njrb * 1 foldable, extendable access ladder at the rear (without platform) * 2 stainless steel toolboxes, approx. 450 x 450 x 450 mm, in front of the front wall * Smart-Board with axle load display * 2 LED work lights above the front wall, switchable via chassis frame switch * 2 LED work lights at the height of the supports (switched via reverse ge