Used Push Broach for sale (1,365)

Year of construction: 1981, condition: good (used), Manufacturer: National Broach Type: GHC 12" Year of manufacture: 1981 workpieceØ max.: 355mm pitch circleØ min/max: 100-152mm tooth width max.: 63,5mm Modu min/max.: 1,25-6,35mm weight: 3,4t Iiodpfxohad Ave Acfsf Operation: honing internal teeth

Condition: good (used), Year of construction: 1993, Equipped with: Iisdpfxsruahwe Acfsf 9" Cutter Head Power Stocks Crowning Auto Loader Heidenhein Scales Variable Feed/Speed Cutter Head RS232 Serial Port Trabon Lube Coolant W/Magnetic Chip Separator AC Servo Motors Full Splash Guards Stack Light Manuals Specifications: Work Gear Pitch Diameter 9" & 12" Cutter Head: 1-12", 1-8" Work Gear Max. O.D. 9" & 12" Cutter Head: 12 1/2", 8 1/2" Diameter Pitch Range: 4-20 Distance Between Centers: 23" Cutter RPM 9" & 12" Cutter Head" 50-500, 50-400 Max. Table Travel Conventional, Tangential, Diagonal: 5", 2" 5"-2" Diagonal Traverse Angle Straight Shaving: 0 Deg. - 90 Deg. Traverse Angle Crown Shaving: 45 Deg. Max. Approx. Max. Table Angle Crowning: 5 Deg. Max. Table Angle Taper: 1 Deg 30' Max. Cutter Head Crossed Axes Angle Left & Right: 25 Deg. Table Cross Feed Inches Per Minute: .5-35 Table Up-Down Feed Inches Per Minute: .004-12.5 Table Up-Down Travel: 8 1/8" Approx. Weight: 9600 lbs

Condition: good (used), overall weight: 10,364 kg, Year of construction: 2019, 2019 GENERAL BROACH 10-30 GBTU VERTICAL TABLE UP BROACH Equipped with: Retriever Shuttle Table Chip Conveyor Auto Load Grayco Lube AB Panelview Coolant Tank & Pump Specifications: Capacity: 10 Ton Stroke: 30" Table Up 1″ Puller / Retriever Hydraulic Power Unit Chip Conveyor Machine Dimensions (approx.): 165″ x 48″ x 60″ Machine Weight Total (approx.): 22,800 lbs. Machine Column (approx.) : 13,000 lbs. Base w/ Chip Conveyor (approx.): 4,700 lbs. Iijdpfx Acertrzajfsf Electrical Panel (approx.): 600 lbs. Hydraulic Power Unit (approx.): 4,500 lbs.

Condition: used, Manufacturer: Konkoly Electro Kft., Hungary Year of manufacture: 2020 Year of installation: 2020.12 Rated voltage: 400 V Maximum current consumption: 40 A Frequency: 50 Hz Isdpfszumw Nsx Acfoif Required pressure: 6 bar Total weight: 5500 kg Noise level: < 95 dB Hydraulic pressure: Cycle time: approx. 30 sec. Changeover time: approx. 10-30 min., depending on the required tooling.

Condition: excellent (used), pulling force - max. 3 t max. ram stroke 1000 mm Ijdpfx Acjzu Tn Iofeif max. workpiece diameter 500 mm table surface area 500 x 400 mm tool length - max. 1200 mm total power requirement 1,5 kW weight of the machine ca. 0,4 t dimensions of the machine ca. 1,0 x 0,8 x 1,5 m round table (450 mm) with indexing, many accessories.

Condition: used, Year of construction: 2022, Used machine Year of manufacture: 2022 Equipment and technical data: BASE MACHINE DYNESTIC 7507 10.7_Push Processing length: 3,100 mm (without tools) Processing dimension in Y-direction: 2,200 mm CAMPUS V7 CAD/CAM Software, 1 x license incl. CabinetControl Base and material removal simulation Upgrade "CAMPUS "Better Nest" freeform nesting software" Uninterruptible power supply (UPS) Milling unit 7830, power: 10.3 kW (S6/40) Sensor package Chipcontrol for 3-axis spindle incl. receiver 7884 Drilling unit, complete, 14 spindles, drive power 3 kW Integrated saw unit for cutting/grooving in X-direction, n(max.) 1,000–7,330 rpm, infinitely variable 1 rear stop rail for the machining field (Field D) at the rear with 1 lateral stop (replaces lateral stops at the rear) Stop monitoring for 5 standard stops at the rear and right Tool changer 7873, 6-position linear pick-up, pneumatically liftable with cover for HSK holders integrated 2 additional mounts for HSK holders for tool changer 7873. Tool changer 7872, single aggregate magazine swiveling in X and Y directions Ijdpfxsygn Ibs Acfeif 2 x vacuum pump 140 m³/h, dry-running Vacuum unit complete, (VP8) 250 m³/h, 400V additional (upgrade) Vacuum connection complete, 16-circuit vacuum VF16 LASER, alignment complete, dot laser complete, option ZB8 Lubrication complete, central lubrication on encoder side 2 x vacuum suction pads for smooth table surfaces, complete 140 x 115 mm, height 30 mm with connection hose 2 x vacuum suction pads for smooth table surfaces, complete 120 x 50 mm, height 30 mm with connection hose Conveyor belt complete, push-off conveyor belt AUT 5 10.7 push-off table Additional extraction via push-off conveyor belt Push-off device on gantry, controlled, incl. simultaneous extraction of the wear plate Label printer Direct Label 7507 and complete touch label light Option ZB74 TouchTool tool length measurement Availability: by arrangement Location: Bavaria

Year of construction: 2015, condition: used, functionality: fully functional, load capacity: 2,500 kg, Push-off Device Iiodew Erc Ijpfx Acfsf ISO Class: ISO Class 3 = 2,500 - 4,999 kg Condition: Ready for operation and fully functional Technical Condition: good Description: Year 2015; ISO 3A (51 cm); Capacity 2,500 kg; Sideshift; Width 1,000 mm; Forks 1,200 mm; ID OS1624

Condition: used, Year of construction: 2016, Pusher Ijdpjt S Nhxefx Acfoif ISO class: ISO class 2 = 1,000 - 2,500 kg Technical condition: good Description: ISO 2A (41 cm) Year 2016 Push Plate 970x1100 ID OS1034

Condition: used, Year of construction: 1972, pulling force - max. 6 t max. ram stroke 1000 mm max. workpiece diameter 350 mm table-size 610 x 470 mm working area 520 x 320 mm work speed 3 + 5 m/min Isdpfx Acoyif Nlsfoif return speed 10 m/min tool length - max. 1200 mm table hole 90 mm total power requirement 8,2 kW weight of the machine ca. 1 t dimensions of the machine ca. 1 x 1 x 1,8 m Machine comes with accessories, such as holders and broches.

Condition: used, BROACHING MACHINE Iisdst Hr Dfjpfx Acfof

Condition: used, Hydraulic workshop press, keyway milling press, groove milling press Hydraulic workshop press, custom-built, MaVo type 5t-20 Used for milling keyway grooves in through-holes. Pressing force: 5 tons (at 100 bar hydraulic pressure) Stand width: 770 mm Cylinder stroke: 220 mm Distance from threaded piston rod to table traverse: max. 900 mm Pressing speed, ram downwards: approx. 11.5 mm/sec. = 220 mm in 19 sec. Pressing speed, ram upwards: approx. 24.5 mm/sec. = 220 mm in 9 sec. Motor power: 5.5 kW Mains connection: 400 volts, 50 Hz - 2-hand control (one button for pump on, 1 button for downwards, 1 button for upwards) - Hydraulic pump HAWE, type K5/3 (can also deliver 400 bar, but the pump is very loud) - Threaded connection on the piston rod: M42 x 1.5 mm external thread - 1 screw-in extension, approx. 290 mm for the piston rod with M42 x 1.5 mm internal thread - 1 screw-in extension, approx. 250 mm for the piston rod with M42 x 1.5 mm internal thread - 2 ram extensions for insertion into the screw-in extension, 110 and 130 mm length - 2 support plates - Very stable steel construction made of 140 series double T-beams - Estimated load-bearing capacity of the steel construction: 40 tons or more - Can be moved with a pallet truck Space requirement L x W x H: 1200 x 930 x 2280 mm Iedowki Apopfx Acfoif Weight: 485 kg

Condition: ready for operation (used), Year of construction: 2008, A vertical internal broaching machine Frömag is available. Broaching tools: 3, stroke: 800mm, pulling force: 60kN, connected load: 15kW. Machine dimensions X/Y/Z: approx. 1050mm/900mm/3800mm, control: Frömag Commander PP-10. An on-site inspection is possible. Iedpfxexph Sds Acfoif

Condition: ready for operation (used), Year of construction: 2012, A vertical internal broaching machine (broaching tower) Karl Klink with lift table and loading portal is available. Broaching force: 63kN, broaching stroke: 1000mm, spindle stroke: 400mm, broaching speed: 7.5m/min, return speed: 24m/min, stations: 1, table width: 500mm. Machine dimensions X/Y/Z: approx. 3700mm/3000mm/3200mm, weight: approx. 3500kg. Documentation available. An on-site inspection is possible. Iiodpjxwcvmefx Acfsf

Condition: ready for operation (used), Year of construction: 2002, overall weight: 7,000 kg, center height: 160 mm, distance between centers: 2,000 mm, controller model: Siematic Rack PC 840, positioning accuracy: 0.001 mm, Automatic reamer tool grinding machine / reaming cutter grinding machine! For grinding the chip chamber and chip face on round reaming tools. TECHNICAL DETAILS Tooth length: 1,700 mm Center distance: 2,000 mm Center height: 160 mm Resolution X-axis: 0.001 mm Resolution Y-axis: 0.001 mm Resolution Z-axis: 0.001 mm Resolution W-axis: 0.001 mm MACHINE DETAILS Axis control: 4 axes Iijdszt Si Uspfx Acfsf Control system: Siemens Rack PC 840 Processor: Pentium 3 Program memory: 20 GB Operating system: Windows 2000 Weight: 7,000 kg EQUIPMENT Simultaneous machining via 2 handwheels

Condition: new, mileage: 100 km, power: 471 kW (640.38 HP), fuel type: diesel, overall weight: 42,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, air conditioning, navigation system, parking heater, Additional features: MAN TipMatic 12.30 OD gearbox with WSK 440 and retarder Rear axles 16 t, with longitudinal and transverse differential locks Rear leaf springs 16 t Front axle 9.5 t Front lift axle 8.0 t, steerable Coupling plate at the front Rear trailer coupling 56 E Rockinger 100 t 3-stage hydraulic system for low-bed trailers, with additional connections at the front and rear Iijdpfxsztuc Re Acfof EVHD 800 sliding mechanism JSK 38 3.5-inch fifth wheel coupling Rear support plate Complete LED headlights Rotating beacon Work lights Complete leather seats Leather steering wheel Hot water heating system Air conditioning Navigation system Refrigerator

Condition: like new (used), functionality: fully functional, Year of construction: 2020, operating hours: 50 h, overall weight: 640 kg, input voltage: 400 V, input frequency: 50 Hz, workpiece diameter (max.): 400 mm, de machine is in nieuwstaat. neem contact op voor meer info. Iedpszugnhjfx Acfsif

Condition: used, Year of construction: 1986, pulling force - max. 6,3 t Iisdpfx Acey Ty Afefof max. ram stroke 1000 mm max. workpiece diameter 400 mm groove width 6 mm total power requirement 2,9 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 1x1x2,2 m

Condition: used, TECHNICAL DETAILS - max. force : 63 [kN] - broaching stroke : 1000 [mm] Iiodpjug U H Uefx Acfjf - spindle stroke : 400 [mm] - 3 cutting feeds : 2,5 - 5 - 7,5 [m/min] - return speed : 24 [m/min] - broaching positions : 1 - hydraulic motor : 9 [kW] - capacity of hydraulic tank : 600 [l] - capacity of cooling tank : 150 [l] - main voltage : 400 [V] - total power : 10,5 [kW] - floor space : 3.700 x 3.000 [mm] - total height : 3.200 [mm] - weight : 3.500 [kg]

Condition: used, DIMENSIONS: Isdpfx Acow E Eudsfsif HEIGHT 100 mm WIDTH 270 mm ELECTRONIC PUSHER LENGTH 6100 mm SAW BLADE MOTOR 4 kW

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: serie nr 3149, overall weight: 11,800 kg, total width: 6,615 mm, total length: 8,890 mm, total height: 2,050 mm, spindle diameter: 50 mm, type of input current: three-phase, space requirement length: 16,000 mm, space requirement width: 8,000 mm, milling spindle length: 650 mm, compressed air connection: 8 bar, spindle speed (min.): 3,500 rpm, spindle speed (max.): 3,500 rpm, length stop: 3,450 mm, input voltage: 125 V, power: 65 kW (88.38 HP), main saw diameter: 450 mm, corner unit for window and door frames, including tools. controlled from the office (Groeneveld). interpolation (angled pins). barcode laser. return transport. documentation available. complete sets of spare blades/saws, including router bits, linked to Groeneveld. automatic counter-piece. maximum workpiece length 6000. sticker printer for barcode. automatic waxelite pump. automatic central lubrication. connections for pin holes and counter-molds. automatic length stop and rotation for workpieces. including extraction pipes with automatic valve. thicknesses from 38 to 150 mm. pin bank: 1x saw blade 40mm. 2x pin shaft 50x650. 2x edge breaker 30x40. router: 1x rounding router 30x40. 3x router bits 50x600. machine can be picked up here; in conjunction with Bos Machines (dismantling and transport not included in the price). price excludes VAT. Iodpsztptqsfx Acfoif

Condition: used, Brand and Model: URPE M200 Iedpfx Aozq R Tgjcfjif

Condition: new, Year of construction: 2025, operating hours: 1 h, machine/vehicle number: 6151710200, Demo tool with only 2 operating hours: Chicago Pneumatic CP4210AS push riveting machine with short alligator head Take advantage of the CP push riveting tool for the most common riveting and repair applications for metal structures in the aerospace industry. Experience the benefits of the CP push riveting tool for the most common riveting and repair applications for metal structures in the aerospace industry. Year of manufacture: 2025 Technical specifications: Max. compression force (90 psi/6.2 bar): 13.3 kN Max. piston stroke: 15.9 mm Height: 92 mm Length: 233 mm Weight: 1.7 kg Jaw type: Alligator short Main material: Aluminum Max. rivet size aluminum (in): 1/8 Max. rivet size aluminum (mm): 3.2 Max. rivet size steel (in): 3/32 Max. rivet size steel (mm): 2.4 Starting system: Safety lever Air inlet thread size (in): 1/4 Air inlet thread size: NPT Max. working air pressure: 6.3 bar Min. hose diameter (5 m hose length): 0.38 in Iijdexwu Rcspfx Acfef Min. hose diameter (5 m hose length): 9.5 mm Visit our store; we always have a wide selection of Pneumatic tools for industry and trade in stock.

Condition: new, functionality: fully functional, Year of construction: 2026, New machine Vertical broaching machine VADARI GmbH TYPE SRM 2027 - 60 KN - 90 KN or 120 KN also possible! BROACHING MACHINES MADE IN GERMANY. Note: The machine can also be offered in a version with a pulling force of 90 KN (9 tons) or 120 KN (12 tons). ==> Currently available at attractive special conditions. ==> Information for manufacturing companies or dealers with their own production: Iiodouqbnhjpfx Acfof If desired, the drawings, rights, spare parts, customer and prospect data, planning and manufacturing documents (including plans for a version with a 9-ton pulling force) for the broaching machine can be purchased from us. Please contact us if you are interested. ==> The new machines are manufactured by us on a project-specific basis after the order is placed. Short-term production and delivery are possible. ==> Spare parts such as spindles and spindle nuts for Wolff SRM and VADARI SRM broaching machines are currently available for immediate delivery. Cost-effective and extremely robust vertical broaching machine for long-term use. Broaching tools (including special broaches for internal gears, etc.) and accessories are available. Please inquire separately. All broaching tools and tool holders from other manufacturers can be used with our broaching machine! Complete manufacturing and assembly takes place at our factory in Germany. Furthermore, we also offer spare parts for Wolff and VADARI SRM broaching machines (spindles, spindle nuts, motors, gears and all other required components - including electrical components). Vertical broaching machine Type SRM 2027 - NEW MACHINE: 60 KN version: The area of application is mainly in the production of keyway grooves from 3-28 mm (but also larger) and profiles of similar dimensions. The compact machine, which takes up little space, can therefore be successfully used in small, medium and large companies. The low price justifies the purchase even for small series and individual production. The drive is via a reversible gearbox brake motor. The maintenance-free twin spindle drive ensures smooth operation and a central pulling point, as well as constant cutting performance. The free tool table allows even large workpieces to be placed on it without restriction. In most cases, the workpieces to be broached do not need to be firmly clamped. The stroke adjustment is carried out by adjustable limit switches with stroke limitation. With short hubs/workpieces, several workpieces can be placed on top of each other. Broaching tools, mandrels and spare parts available on request. Technical data: Pulling force: 60 KN at 3 m/min, 40 KN at 6 m/min. Broaching speed: 3 m/min + 6 m/min. (Optional: stepless speed adjustment (from 0 m/min to 6 m/min) possible with extended electronics) Return speed: 6 m/min. Stroke: 1050 mm Broaching tool length: 1200 mm Workpiece diameter: any Work table: 450 x 350 mm Table hole: 140 mm Weight: approx. 510 kg Footprint: 750 x 570 mm Overall height of the machine: 1510 mm Drive power: 3.7 / 4.4 kW Electrical equipment: 400 / 230 volts 50 Hz Control voltage: 230 volts Operating voltage: 400 volts 50 Hz Paint finish: Exterior RAL 7035/7036/7016, Interior RAL 3000 Safety door: Standard equipment Coolant system: Standard equipment The machine complies with the current Machinery Directive and has CE marking.

Condition: new, Two buttons and emergency stop switch Length 129 mm Iiedpfstr Ei Rox Acfsf Width 70 mm Height 65 mm Total height 92 mm unused, from magazine release several available

Condition: used, Year of construction: 2023, machine/vehicle number: 03.2862, overall weight: 15,000 kg, ARTHUR KLINK RISH-M10X1250X400 Clearing machine with automation Machine data • 10 → Pull force class ≈ 10 t (≈100 kN) • 1250 → Maximum clearing stroke ≈ 1250 mm • 400 → Table/working area ≈ 400 mm width • Year of manufacture: 2023 • Recorded operating hours: 76 • Control system: ARTHUR KLINK • Own weight: approx. 14,000 kg • Connection values: 400 V / 50 Hz / 24 VDC / 50 kVA Automation / Peripherals • Chip conveyor, NEUHÄUSER, Type 2126-2, Year of manufacture 2022, Serial no. 308904/01 Iedpfszgfxisx Acfeif • Hydraulic tank, HBE, Year of manufacture 2023, Capacity approx. 1,200 l, Serial no. A22-08417 • Loading robot, YASKAWA, Type YR-1-06VXH12-A00, Year of manufacture 2021, Own weight approx. 150 kg, Maximum payload approx. 12 kg, Serial no. SV2112022790001 • Robot control system, YASKAWA, Type ERAS-1000-06VXH25-E10, Year of manufacture 2022, Own weight approx. 70 kg • Loading and unloading station, 2-position, METEC / EGS AUTOMATION, Type SUMOEKOPLEX MSM-AUTOMATION KLINK, Year of manufacture 2023, Serial no. 220452-4 • Chain conveyor station, EKS AUTOMATION, Type Clearing machine 03.2862, Year of manufacture 2023, Own weight approx. 300 kg, Dimensions (W x H x D) approx. 2,450 x 2,100 x 1,600 mm Note The control cabinet needs to be inspected as some components have been disassembled. Please refer to the last image.