Used Pvc Line for sale (16,328)

Condition: reconditioned (used), Year of construction: 1997, operating hours: 216 h, functionality: fully functional, Equipment: documentation/manual, A reconditioned and functional profile line for rigid PVC-profiles, consisting of: Twin-screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine no.: 85-399 Screw geometry: for PVC-hard powder Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. approx.30 rpm Screw torque: 10000 Nm Motor power: 3.8 - 23.0 kW Drive motor: commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool heating zones: 8 Temperature control: 12 x digital temperature controllers PMA KS40 Accessories: Mass pressure sensor and mass temperature sensor Connected load: approx. 60 kW (without tool) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material hopper and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Total weight: approx. 4000 kg Note: The electrical control cabinet was completely renewed approx. 3 years ago. Since then, the extruder has only been in operation for 216 hours. Condition: recondition and checked for function Vacuum Calibration Unit Manufacturer: Blake Kunststoffproduktionsanlagen Type: 203-3-4,0 Year of manufacture: 1997 Serial number: 758 Total length: 5600 mm Vacuum pumps: 3 x 5.5 kW Longitudinal adjustment: electromotive Height/lateral adjustment: front and rear via threaded spindle and handwheel V2A tub: interior/exterior width: 450/700mm, length: 4500 mm Connected load: approx. 20 kW Total weight: approx. 3.000 kg Condition: recondition and checked for function Caterpillar Haul-Off Manufacturer: Blake Kunststoffproduktionsanlagen Type: 303-1600-270 Year of manufacture: 1997 Pulling force: approx. 40,000 N Pads width: 300 mm Passage width: max. 500 mm Passage hight: 100 mm Effective contact length: 2400 mm Haul-off speed: max. approx. 8.0 m/min. Extrusion height: 1000 – 1200 mm Caterpillar clamping: pneumatic, at the front and back Dimensions: 4000 x 1200 x 2300 mm (LxWxH) Weight: approx. 3000 kg Condition: recondition and checked for function Profile cross-section, max.: approx. 500 x 100 mm Note: Iodpfxsx Rx D As Adwoal The vacuum calibration unit, including caterpillar pull-off, can also be purchased separately.

Condition: refurbished (used), Year of construction: 1991, functionality: fully functional, Complete extrusion line for PVC profiles, fully overhauled and tested EXTRUDER: • IDE 75/25 type ME7/3 • single screw, PVC profile geometry and barrel in good condition • screen control (retrofitted by the manufacturer) • year of manufacture: 1993 • 35kW motor, 4 to 40 rpm COEXTRUDER: • IDE MEB 30/25D • Single screw Ø30mm 25LD • PVC profile geometry screw and sleeve in good condition • Year of manufacture: 1992 • 3.8kW motor, 6 to 64 rpm CALIBRATION : • IDE • Length: 2 metres • 2 vacuum pumps, 16 valves • 14 water valves • Manual horizontal and longitudinal adjustments HAUL OFF: • IDE ME30/5 • Year of manufacture: 1993 Iaedpfx Adsxukg Iowjl • Contact length: 1100 mm • Width: 100 mm CIRCULAR SAW • IDE ME52 • Blade: 300 mm • Pneumatic carriage travel 180 mm • Year of manufacture: 1991 TILTING TABLE • IDE • Length: 4000 mm • Pneumatic movement Everything is in very good overall condition, the machines are very clean and ready for use.

Year of construction: 2016, condition: as good as new (ex-display), Manual PVC powder coating line for 3D fence panels ( NEVER USED ) Type of coating – electrostatic PVC coating line is semi-automatic. Need 2-3 workers. Capacity of furnace – 10 pieces of 3D fence panels...baking time approx. 15 minutes ( with color of manufacturer IGP ). Of course baking time depends of color quality and chemical composition of color. The line is made on a modular system, which means that it can be installed in several ways, according to the possibilities of free space in the factory. Dimensions of line components - Iodpeiryd Uofx Adweal 1. Polymerization furnace – 2.500 x 3.500 ; Height – 3.200 mm 2. Painting booth ( 2 pieces ) - 3.000 x 2.000 ; Height – 3.200 mm 3. Washing chamber - 2.200 x 3.500 ; Height – 3.200 mm 4. Bath - 2.500 x 2.500 - Height – 900 mm plus two new Gamma pistols.

Condition: good (used), WEBER tube extrusion line including: WEBER DS 8.5 Elmepla saw Iodpovryhyefx Adweal Battenfeld R200/6 Battenfeld V125

Condition: new, functionality: fully functional, Year of construction: 2022, Complete extrusion line for the production of PVC shrink film, specifically designed for sleeve-label applications. Built in 2022 by RL Plastproject (Italy), the machine is brand new, never installed, and immediately available. Technical Specifications: Product: PVC shrink film for sleeves Material: Rigid PVC dry blend Extruder: Single-screw with venting and gravimetric dosing Output: approx. 180–200 kg/h Film thickness: 40–80 micron Usable film width: up to 620 mm Die width: 900 mm Line speed: up to 60 m/min (depending on film) Iedpfx Adow Ahfgowsal Cooling: Calender with chill roll Orientation: Transverse shrink forming unit Corona treater: Integrated Winding: Dual-position slitter-rewinder Control system: Siemens PLC with touchscreen HMI Installed power: ~220 kW (to be confirmed) Air requirement: 6 bar Footprint: approx. 25 x 6 meters

Year of construction: 2017, condition: as good as new (ex-display), Complete PVC Window Line 30 Windows Consisting of: Mitre Saw GS-400/M with length stops End Miller AKF-210 Sight surface groover 7405 Handle Drilling and Routing Machine KF-130S with self centring Waterslot Drainage Router SK-8/3 Single Head Welder WSA-1E, 2.0mm restrictions Glazing Bead Cutting Saw GLSM-200E Iodpfoux Adjx Adwjal

Condition: ready for operation (used), Year of construction: 1995, operating hours: 39,000 h, functionality: fully functional, Equipment: documentation/manual, A used and functional profile line for rigid PVC-profiles, consisting of: Twin-screw extruder (parallel) Manufacturer: WEBER Type: DS 7.22 Year of manufacture: 1995 Machine no.: DS70-043 Operating hours: 39,000 hours Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, continuously adjustable Drive motor: DC low-voltage motor, thyristor-controlled Drive power: approx. 25 kW Cylinder heating/cooling zones: 5/3 (air cooling with fan) Adapter heating zone: 1 Tool heating zones: 5 Control: conventional control with digital temperature controllers Degassing: Busch rotary vane vacuum pump (1.5 kW) Output capacity, max.: 120-150 kg/h for hard PVC, depending on material Connected load: approx. 50 kW (without tool) Special accessories: Mass temperature sensor and mass pressure sensor Adapter between extruder connection and extrusion tool Used tool set for a window profile (widening), consisting of: - Extrusion tool ‘widening’, incl. heating bands - Dry calibration - Vacuum tank approx. 2 m long, with 8 slots for calibration discs - 16 calibration discs Vacuum calibration unit Manufacturer: Uniplast / Greiner Type: CAL VAK 4P Year of manufacture: 1992 Machine number: K9209590 Total length: 6500 mm Vacuum pumps: 4 x Speck vacuum pumps (4.3 kW each) Water circulation pumps: 2 x Calpeda (1.1 kW each) Caterpillar haul-off, incl. attached saw Manufacturer: Uniplast / Greiner Iedpjxu U Trsfx Adwjal Type: CAT PUL 2D Year of manufacture: 1992 Machine number: R 9204546 Haul-off: Effective contact length: 2000 mm Pad width: 250 mm Haul-off force, max.: approx. 25000 N Speed range: approx. max. 10 m/min. Profile saw: HM circular saw blade: Ø 450 mm Profile cross-section, max.: approx. 300 x 100 mm Tilting table Manufacturer: Ide Type: ME N 52/2 Year of manufacture: 1994 Length: 6000 mm Support width: 270 mm Note: The complet profile line was overhauled in 2020 and has only been in operation for 325 hours since then.

Year of construction: 2016, condition: as good as new (ex-display), Manual PVC powder coating line for 3D fence panels ( NEVER USED ) Type of coating – electrostatic PVC coating line is semi-automatic. Need 2-3 workers. Iaedpfeil Agnjx Adwjl Capacity of furnace – 10 pieces of 3D fence panels...baking time approx. 15 minutes ( with color of manufacturer IGP ). Of course baking time depends of color quality and chemical composition of color. The line is made on a modular system, which means that it can be installed in several ways, according to the possibilities of free space in the factory. Dimensions of line components - 1. Polymerization furnace – 2.500 x 3.500 ; Height – 3.200 mm 2. Painting booth ( 2 pieces ) - 3.000 x 2.000 ; Height – 3.200 mm 3. Washing chamber - 2.200 x 3.500 ; Height – 3.200 mm 4. Bath - 2.500 x 2.500 - Height – 900 mm plus two new Gamma pistols.

Year of construction: 2019, condition: as good as new (ex-display), Complete PVC Window Line 60 Windows Consisting of: Double Mitre Saw DS-110/3.5M End Miller AKF-210 Handle Drilling and Routing Machine KF-130S with self centring Waterslot Drainage Router SK-8/3 Isdpfx Aeux Aqodweal Two Head Welder WSA-2 LV, 0.2-2.0mm restrictions Glazing Bead Cutting Saw GLSP-200E with stop system

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, We have a production line for UPVC profiles, they were purchased in 2010, they have only operated for 2 years, and now they are for sale because the company that had them has now closed. They were serviced before being stored. The machines are in Patras, Greece. Any operational check is welcome. (1) Aluminium and UPVC end milling machine OMC Maxima, (new never connect) (2) CNC automatic line UPVC CNC corner cleaning machine with 4 head horizontal welder - RISUS, RKT-8000 (3) UPVC bead saw - RISUS, RK-1080 (4) UPVC 4 Head vertical welder - HAYA, (5) UPVC 4 Head corner cleaning machine semi-automatic - WEGOMA, WPA4 (6) Single Head multiple corners welder machine -RISUS, RYL-1050 (7) UPVC profile Hot air bender /CBM, (8) 4 Machine benches, (9) ACCESSORIES SMALL TOOLS AND DIES (milling cutters for the machines, chisel etc.). There are spare parts available , as well as technical assistance, if needed. The selling price for all these machines together is at least 50,000 Euros plus VAT, if necessary. They do not sell independently. Iajdpfx Adewyvh Rjwjl Collection from Patras, Greece (we have a fork lift truck to help if need)

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 902 S Hidrolik Alüminyum Köşe Presi Makinesi, • Complies with CE standards • Corner press machine designed for joining aluminium profiles at 90 degrees • 2 upper presses and blade movement are hydraulic • Equipped with a mm scale system for adjusting blade height and feed • Centering square stop is hydraulic • Drain button for fine adjustment is available • Machine comes with 2 pieces of 4 mm blades • 2 pedals are used for hydraulic pressing and profile clamping • Polyamide plate is provided to prevent damage to profile surfaces • Left and right profile support arms are available Ijdpfxerbk Tfe Adwoal

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 901 S Pnömatik Alüminyum Köşe Presi Makinası, - Conforms to CE standards - Corner press machine designed for 90 degree joining of aluminum profiles - 2 top presses and blade movement is pneumatic - There is a mm ruler system for the height and advancement of the blades. Iasdjrbiv Aopfx Adwjl - Centering miter wedge is automatic - Drain button available for fine adjustment - Pneumatic presses use 2 pedals to squeeze the profile - Profile surfaces are polyamide sheet to prevent damage - Side support arms available

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 450 ALÜMİNYUM VE PVC PANJUR KUTU VE LAMEL KESİM MAKİNASI ( Ø550 mm ), • Designed for bundle cutting of roller shutter slats, setwise cutting of roller shutter boxes, cutting of side rails and set cutting of monoblock roller shutter boxes. • Clean surface cutting thanks to high saw speed • Roller conveyor system, right and left 3 meters each, 2 units • Saw cutting speed is adjustable • All roller shutter boxes up to a maximum of 350 mm can be cut • Precise cutting thanks to the linear guide system Iasdpfx Aderamzfjwsl • Saw blade diameter Ø550 mm OPTIONAL • Cooling system • Capability to operate with digital meter

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 431 Alüminyum Pvc Manuel Üstten Kesim Makinesi, • Complies with CE standards. • The machine can cut at +45, -45, and intermediate angles. • Quick setting stops for 90, 75, 60, and 45 degrees. • Table locking lever for intermediate angles. • Profile clamping is pneumatic for practical use. • Diamond saw blade diameter is Ø400 mm. • Standard with measuring and material handling conveyors (2.5 meters on both left and right sides). • Cooling unit for cutting aluminum profiles. • Capability to work with a digital meter. Iodpfx Adjramzujwsal OPTIONAL: • Roller conveyor system (3 meters on both left and right sides).

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 4000 S PLUS Full Otomatik Servo Motorlu Çift Köşe Alüminyum Pvc Kesim Makinası, - It is a fully automatic controlled cutting machine designed to cut PVC and Aluminum profiles straight or angled with a double head Ø600 mm saw. - Hydro - Pneumatic Hydro - check controlled saw movement - Cutting Accuracy +/- 0.1 mm - High precision thanks to backlash-free gearbox - Automatically adjustable to two inward angles at 90 and 45 degrees - 15" Windows-based industrial PC - Diamond saw 2 x Ø600 mm Iodpfxsramy To Adwsal - Servo motor motion system - 21.5 cm saw exit distance and 70 mm x 3 profile cutting capacity - Hydro-check saw speed adjustment - 9.5 meter cutting feature - 90 degree wedge slicing feature - Multi-language support - Conveyor profile support unit - Motion-sensitive support arm - Profile support unit between cutting heads - Spray saw cooling system - 2 vertical clamps - 4 horizontal clamps OPTION - Barcode printer - Cutting list transfer via USB Memory

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 403 Alüminyum Pvc Kesim Makinası, • Compliant with CE standards. • Used for cutting aluminum and PVC profiles. • Hydro-pneumatic cutting process. • Adjustable cutting speed according to the profile. • Capable of cutting at fixed angles: -60, -45, -30, -22.5, -15, 0, +15, +22.5, +30, +45, +60 degrees to the left and right. • Pneumatic vertical and horizontal press. • Ø600 or Ø650 mm diamond-tipped aluminum saw blade. • Equipped with roller conveyor (3 meters right and left). • Oil spray system. Iedoramrzepfx Adwsal • Precision cutting possible thanks to 3 kW motor and Hydro-check. • Can operate with a digital measuring system.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 1000 DİJİTAL METRE, • 3 metre length • +/- 0.1 mm measuring accuracy • Servo motor (optional) • Decimal operation option (especially for aluminium) • Bluetooth measurement option (please ask for details) • 220 Volt voltage Iaedpforblalox Adwjl • Touch screen • Backstop retraction with a single button for easy removal of the cut product from the mould • User-friendly design • Easy calibration

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 6000 CNC KÖŞE TEMİZLEME MAKİNASI, - Conforms to CE standards - It is a semi-automatic CNC machine designed to clean the burrs formed after welding of PVC windows, sashes, door frames and other profiles welded at 90 angles. - The process of cleaning the bottom, top, and outer surface of the profile independent of each other7 - Touch screen panel - Easy memorization process Iaodpjrbf R Tefx Adwsl - Comfortable user-adjustable processing speeds - Ease of writing the program of the profile to be cleaned thanks to the special program in the machine - NC control system with PLC unit - User y-z axes on a joystick wristwatch - Easy program creation and fine-tuning - Average processing time of the machine in one corner is 5-8 seconds - 400 - 500 frames can be cleaned in 8 hours of average operation - Unlimited program installation memory - Daily monthly production report dashboard - The machine has 2 servo and 1 Hertz motor - Ø200 mm Diamond tooth saw - All PVC profiles can make angles and radii and have circular interpolation motion - Providing comfort during movement by preventing scratching of profiles thanks to the front brush stand system

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 211 ALUMİNYUM PVC ÇOKLU ORTA KAYIT ALIŞTIRMA MAKİNESİ, - Notching (milling) process with adjustable linear motor movement - 5 adjustable resting systems for different profiles - Quick blade change feature that makes work easier - Notching of center register profiles between 1/6 pieces Isdpfx Adjq U S Dijwjal - Profiles are fixed in the machine with pneumatic vertical and horizontal clamps - Independent operation of vertical and horizontal clamps - Spare knife storage cabinet on the front of the machine - Notching (milling) of 2.5 meter long profiles by means of support arm - Maximum profile notch height ( h ) 140 mm OPTION - Spray cooling system - 220 volt operation

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 301 PVC ÇITA KESME MAKİNESİ, • Conforms to CE standards. • 45-degree cutting capability for PVC glazing bead profiles. Iaodpfx Adsq U Tbkjwel • Automatic operating system. • 2.5-meter conveyor system for long frames. • Adjustable cutting speed. • Pneumatic profile clamping system. • Saw blade diameter Ø200 millimeters. OPTIONS • Left conveyor attachment capability. • Notching saw. • Connectivity for digital meter. • Capability to connect a Bluetooth measuring station.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 401 Aluminyum Pvc Alttan Çıkma Kesim Makinası, • Complies with CE standards. • Performs precise cutting at 0 - 180 degrees and intermediate angles. • Quick setting stops for 15, 22.5, 30, 45, 60, and 90 degree angles. • Table locking lever for intermediate angles. • Saw output speed regulator reduces speed when cutting aluminium, decreasing motor load. • Safety guard for secure cutting. • Diamond saw blade diameter: 450 mm, output distance: 12.5 cm. • Standard with measurement and transport conveyor (2.5 metres right and left). OPTIONAL • Cooling system and Hydro check system available for aluminium cutting. • Capability to work with a digital meter. Ijdsq U Tctopfx Adwsal

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 101 S PVC Tek Köşe Kaynak Makinası, - Conforms to CE standards. - Weldable angle : All angles between 25 - 180 degrees. - Welded profile maximum height 150 millimeters - Minimum height of welded profile 40 millimeters - Upper pistons are individually compressible - Left moving table system available - Profile clamping is practically done with the pedal - PLC control system available - The heating unit has thermostatic control - The degree of the heating plate can be easily changed via the digital display - Heat temperature, welding time and pressure can be adjusted for different profile types Iedpfx Adora Niajwjal - Time saving thanks to easy mold change system.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 601 PVC Köşe temizleme makinesi ( 3 Bıçak), - Complies with CE standards. - Cleaning the corners of PVC profiles after welding - Cleaning the upper and lower surfaces of the corners - Possibility to separate surface and corner cleaning for acrylic profiles - Fully automatic operation with PLC - 3 different blade attachment possibilities - Automatic case wing profile separation feature Iaedpfxerbid Io Adwjl - Ability to automatically center and square the profile

Condition: new, Year of construction: 2026, machine/vehicle number: SÇ 6000 S PVC FULL CNC KÖŞE TEMİZLEME MAKİNESİ, • Automatically cleans the burrs formed on the inner-outer corners and upper-lower surfaces due to melting during the corner welding process of PVC profile frames, with high precision and speed • CNC control system (2 axes) Isdpjrbg Euefx Adweal • Automatic profile recognition feature • Remote installation and support • Can be connected to four-head welding machines without requiring revision • Operates with G Code • Processing capacity of 160-200 frames per 8-hour shift • Equipped with a total of 10 cleaning tools • Cleaning of upper and lower surfaces for both white and colored profiles • Cleaning of upper and lower surfaces for coated profiles • Cleaning of inner and outer gasket grooves • Cleaning of both square and radius surfaces • Unlimited memory capacity and easy operation thanks to the 10" LCD HMI control panel • Long service life with automatic lubrication system (activated after every 60 frames) • Linear guide system • Unique software allows very simple operation and programming • Brushed support table system for easy rotation of profiles • Easy profile programming (handwheel) • Adjustable working speeds to desired levels

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 521 PVC ÜÇLÜ SU TAHLİYE MAKİNESİ, - Possibility of opening a water drainage channel for PVC profiles - Possibility for three groups to work separately - Ability of the water drainage system to operate in angled position - Pneumatic profile clamping system - Fully automated system operation Iaodpfjra Nqtox Adwol