Used Rem Power Smb 7000/1200T for sale (39,312)

Condition: used, Hydraulic unit, HAWE hydraulic unit Type: HC 2L/1.1-1B/400-0-31F-G24 Hydraulic pump in the tank Flow rate: 1.1 L/min Hydraulic pump power: 0.9 kW Bdodpfszpbqgex Apvof Hydraulic pump: 380 Volt, 50 Hz Hydraulic pressure: max 400 bar - 1 solenoid valve, 24 Volt Weight: approx. 12 kg Good condition

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 6SL3995-6AX00-0BA0, overall weight: 6 kg, total length: 500 mm, total width: 300 mm, total height: 50 mm, Units are disassembled from a cabinet that has never been used 4 units available Bodpevmgz Asfx Apvedf

Condition: excellent (used), Year of construction: 2002, High-quality copy lathe, wood lathe with milling unit, PLC-controlled A video of the machine in operation can be sent upon request. PLC-controlled wood copy lathe for turning and milling The machine has two controlled axes: the longitudinal axis and the rotary axis. Input of various feed rates and corresponding lengths for turning, as well as additional divisions and pitches for milling. Several programs for turning and milling operations can be stored. Hydraulic copy sensing of a pattern or template. The roughing and copy tools are equipped with fine adjustments. Template adjustment can be made from the front and rear using fine-threaded spindles. The copy length can be divided into up to 6 sections with different feed rates for turning highly contoured workpieces. Drive motor 400V / 3kW with electric motor brake. Two speed levels adjustable via V-belt, and within each level, operation can be continuously adjusted using a frequency inverter. Speed level 1: 200 - 2000 RPM Speed level 2: 350 - 3400 RPM Distance between centers approx. 1550mm Copy length with steady rest approx. 1350mm Bed length approx. 2100mm Feed adjustable continuously, rapid traverse with safety end stop. Hydraulic copy slide with V-turning tool. Spindle with M33 thread and MK3 internal taper. Tailstock MK3 and with quick-release device. Extensive accessories: Ring steady rest with front turning tool and insert guide. Four-jaw steady rest Four-jaw chuck 125mm Copy tools, center points, hexagonal drive, etc. Milling unit with 3kW motor for mounting on the copy slide. 5 milling heads available, only the 16mm collet is missing. CE marking Operating manual V-belt new Original paint, only a few spots have been touched up. Very good condition from a small carpentry shop. The machine was apparently not used to produce large quantities. Bdedpfx Apszfwm Nevjf Dimensions approx. 2600 x 1300 x 1300mm (LxWxH). Weight approx. 800kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this provider".

Year of construction: 2020, condition: new, functionality: fully functional, Brand new in the box, never used. Please check out our other listings as well. Bdjdpfxswiqgge Apvjf

Condition: excellent (used), Year of construction: 2019, Load capacity, horizontal/vertical: 100/50 kg Speed, continuously adjustable: 0.6 - 6 rpm Bdedoznvp Uepfx Apvef Electrical connection: DC 230 V Space requirement: 470 x 400 x 350 mm Weight: 17 kg

Condition: ready for operation (used), Cutting capacity, circular: 340 mm Cutting capacity, flat: 340 x 290 mm Cutting capacity, square: 325 x 325 mm Saw blade dimensions: 600 x 52 x 2.5 mm Bdsdjznvnkjpfx Apvof Drive motor: 380 V, 6 kW Space requirement: 2100 x 2100 x 1470 mm Weight, approx.: 1840 kg

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: HAW07.5-2-22-T96, overall weight: 100 kg, total length: 600 mm, total width: 400 mm, total height: 900 mm, input voltage: 400 V, type of input current: AC, input frequency: 50 Hz, power: 7.5 kW (10.20 HP), operating pressure: 250 bar, Equipment: hydraulics, Hydraulic power packs from 1.1 to 22 KW output ⦁ Drive type electric motor - petrol engine - diesel engine or PTO driven ⦁ Hydraulic oil tank 36L - 96L - 144L - 250L or according to customer requirements ⦁ Hydraulic pump Gear pumps or axial piston pumps ⦁ Additional components such as valves and control technology ⦁ Tank size 36L - 96L - 144L - 250L or according to customer requirements (customer drawing) Bdodpst U Uiasfx Apvjf

Condition: new, Year of construction: 2026, Step adapter for power tools, consisting of four elements that allow diameter reduction from 100 mm to 68/46/40/35 mm. Bjdsycvhnjpfx Apvsdf

Condition: like new (used), functionality: fully functional, Year of construction: 2008, operating hours: 1 h, machine/vehicle number: 6151922015, From our demonstration tool inventory, tested and fully functional: Used Chicago Pneumatic Redi Power RP2015 pneumatic pistol screwdriver with shut off clutch with trigger start Output: Hex 1/4" Torque: 2.0 to 5.5 Nm / 18 - 49 in.lb Idle speed: 1470 min-1 Length: 200 mm Weight: 1.0 kg Bodpfx Apev Im Ncsvsdf Other tools for industrial production and maintenance on request.

Condition: excellent (used), Year of construction: 2013, Control system: UNILOG B6 Closing force: 4500 kN Distance between columns: 950 × 700 mm Minimum mold height: 330 mm Maximum mold height: 780 mm Screw diameter: 65 mm Injection pressure: 2070 bar Maximum injection weight: 980.9 g Injection unit: ServoElectric (Knodler) Injection speed: 400 mm/s Servo package S0 ServoPower package S1: hydraulic pump speed control for increased energy efficiency Integrated filter unit: Yes Ejector type: Electric Ejector force: 60 kN Ejector stroke: 180 mm Additional equipment: Air valve Cooling water flow regulator Digital interface for temperature controllers (control of up to 6 thermoregulators) Interface for nozzle needle shut-off control in the mould Interface for external hot runner controller Full integration for Wittmann W8xx series robot Bjdoytfqaepfx Apvedf Quality control button Language: Polish

Condition: used, Year of construction: 2013, Punching capacity 220 kN laser capacity in Watt 4000 travel -x axis 2500 mm travel -y axis 1250 mm Cutting capacity structural steel 8 mm Cutting capacity stainless steel 8 mm Cutting capacity aluminum 6 mm workpiece weight 280 kg weight of the machine ca. 24.000 kg dimensions 10130 x 8898 x 2328 mm Includes DORNER 2200 Series conveyor belt Operating hours: - Approx. 7,880 h Standard equipment: - Travelling ball-bearing tables - Linear magazine for tool stations and clamping jaws - 22 tool stations, 3 clamping jaws - Foot switch for closing the jaws - Flap for stamped parts 500 x 500 mm incl. sensor - Chip container - 2 good parts containers (stamping and laser side) - Initial fill of hydraulic oil - FocusLine - NitroLine - FastLine - Additional Xp and Yp axes - Ejection cylinder for laser parts - High-speed flap for laser parts 500 x 500 mm incl. sensor - Liftable laser cutting table - Liftable laser cutting table - Slag cone detection TRUMPF Laser: - CO2 laser TruFlow 2700 incl. LensLine and optimized StandBy - Maintenance-free turbo radial blower - High-frequency excitation - TASC laser control Cutting head: - Lens cutting head with 170 mm lens - Universal quick-change device (UTI) with bus connection - ControlLine Bdsdpjy D T S Ujfx Apvjf Punching head: - Electro-hydraulic punching head - Hydraulic single-tool holder with 360° rotation - Programmable hold-down device (active/passive/re-adjustment) - Tool length compensation - Spray lubrication for punch - Punching scrap extraction - Level monitoring for thread forming and tool lubrication Control system: - Open control system based on Rexroth IndraMotion MTX - 15" TFT color screen - Teleservice via the Internet - Automatic shutdown - Production plan Data transfer - USB interface - RJ45 network connection Safety: - CE marking - Dual-beam safety light curtains - Emergency stop Tools: 2x 10-function multitool 1x 5-function multitool 1x 5-function EeasyType multitool 5x thread forming tools 1x Multishear 1x calibration tool 1x ball deburrer 2x gills M3–M8 threading dies Centering studs (top and bottom) Countersinking tools for 1.5 and 2 mm Various countersink and form countersink tools

Condition: excellent (used), Safety relay, safety control, overrun relay, flow monitor, contactor, relay, current monitor Bdsdszmucdjpfx Apvef -Manufacturer: Telemecanique, Power Monitor Ovp -Type: RM4JA31M -Cardboard dimensions: 90/80/H25 mm -Weight: 0.1 kg

Condition: good (used), Power cable, flat cable, crane cable, rubber hose cable -Power cable: Flat cable, crane cable, 4-core -Type: 4G 2.5 Bsdpfxozmtw To Apvedf -Length: 30 m -Transport dimensions: roll Ø 565 x 25 mm -Weight: 8.4 kg

Condition: ready for operation (used), DR.KAISER C100 FA-172 Grinding spindle, 7000 rpm, 1.3 kW, used, shows normal signs of wear, 100% functional, scope of supply as shown in the photos. Bdodpfx Apsx Eq Ipsvsf

Condition: used, Year of construction: 2006, Nominal volume flow: 4900 m³/h. Minimum volume flow: 3532 m³/h. Intake nozzle: 250 mm. Static pressure at Vmin: 2740 Pa. Air pressure connection: 8.5 bar. Motor: 6.5 kW. Bodpszl Tdwofx Apvsdf Storage location: Nattheim.

Condition: new, Year of construction: 2026, Capacity ~ 15,000 m³/h Motor power 15 kW / 20 HP (optional: 18 kW motor) Bdsdox D Ah Nepfx Apvjf Filter surface area 57.9 m² Exhaust port diameter 400 mm Voltage 400 V Filter material polyester Filter permeability 3 microns Filter dimensions Ø152 x 1120 mm Number of filters 108 Dimensions (L x W x H) 4147.5 x 1129 x 2480 mm Weight 870 kg Scope of delivery: Polyester filter, 3 microns 5 containers 3 chimneys Filter cleaning using a vibration system with control The automatic vibration filter cloth cleaning system allows for continuous monitoring of filter operation during breaks and during operation. The filters used are classified as "G" filtration category, which allows for air purification up to 0.2 mg/m3/h (H2).

Condition: new, Year of construction: 2026, The manufacturer guarantees the cleaning quality The system of automatic vibrating cleaning of the filter cloth - during breaks and during filter operation, it allows for constant monitoring of the correct operation. Bdsdpsgyfmajfx Apvsf Technical specifications: • Conforms to H-2 standard • Extraction capacity ~ 4500 m3/h • Motor power 3.0 kW • Speed 3000 rpm • Voltage 400V, 50Hz • Suction connection 200 mm • Polyester filter material, 5 microns • Filter surface 8.8 m2 • Speed 28 m/sec. • Number of filters 18 • Dimensions 752 x 1502 x 2144 mm • Weight 180 kg • Category of filters G • Polyester filter material • Noise 80 dB without connection, 65 dB when connected to the machine via pipe Delivery set: - 5 micron polyester filter - 1 container - Running gear - Filter cleaning using a controlled vibration system - Fire extinguisher - Fulfill H-2 Norms + 850 euros for the model with fire extinguisher (Safe System)

Condition: used, Used Siemens SIMODRIVE 611 power module for CNC and automation applications. Manufacturer: Siemens Series: SIMODRIVE 611 Product type: Power module Model: 6SN1123-1AA00-0HA1 System: SIMODRIVE 611 Design: Plug-in module Mounting type: Control cabinet mounting Cooling: Air-cooled Bedpfezmm Irjx Apvedf Application: Industrial drive technology

Condition: used, functionality: fully functional, Year of construction: 2012, Standard equipment: Machine - Work area 2500 x 1250 mm - Sturdy, easily accessible C-frame - Coordinate guidance for highly precise machining - Linear magazine with 21 tool stations and 3 clamping claws - Drives with maintenance-free three-phase motors - Follow-up device with programmable clamping device - Foot pedal for clamping claw closure - Ball tables - Two good part containers - Scrap container - Initial oil fill - Transport and assembly device - ContourLine - FocusLine - NitroLine - FastLine - FlyLine - PlasmaLine - Ejector cylinder for laser parts - Fast flap for laser parts 500 x 500 mm incl. sensor for part chute Bodpfx Aozmgm Iopvsdf - Liftable laser cutting support - Slug detection TRUMPF Laser - Laser TruFlow 2700 with LensLine and optimized standby mode - High-frequency excitation - Cooling unit - Laser control TASC - Enclosed beam guidance - Beam tube ventilation with compressed air Cutting head - Lens cutting head with 170 mm focal length - Universal cutting head quick-change device UTI with bus connection - ControlLine Programming - Extended workshop programming (TruTops via network access) Punching station - Electro-hydraulic punching head - Rotatable mono-tool holder - Tool length compensation - Programmable clamping device with manually adjustable clamping force - Stroke counter punch - Spray lubrication punch - Punch slug extraction - Deformation detection - Flap for punching parts 500 x 500 mm incl. sensor for part chute - Reaching the fill level in the punching console - Level monitoring for thread forming and tool lubrication Control system - TRUMPF control system based on Rexroth IndraMotion MTX - External control panel with 15" TFT touchscreen - Hard disk with 160 GB storage capacity - Integrated technology data - Teleservice via internet - Integrated e-shop - Programmable cutting gas pressure - Automatic shutdown - Production plan Data transmission - Network connection RJ45 and USB interface Safety - CE marking - Dual light barriers - Monitoring system for gas pressure, temperature, coolant, etc. - Quick shutdown - Protection against stray radiation - Compact dust extraction system Extended equipment - Brush tables - MultiTool function - MultiShear function - MultiBend function - Thread forming function - Deburring and rolling technology - Active die - StripLine - Adaptive stroke calibration - Spray lubrication die - 3 clamping claws - Vibration-damped installation - Chip conveyor with tilting container - Brush tables with loading and unloading aid - Air blow-out device for small parts - Follow-up cylinder Automation: - Toolmaster

Year of construction: 2014, condition: good (used), functionality: unexamined, Description For sale is an industrial DC power supply / direct current power supply, Thumm SNT 20, from a decommissioned system. The unit is designed for high direct currents and is suitable for various industrial applications, testing systems, special machine construction, electroplating, coating, or process systems. Technical data according to the nameplate: Manufacturer: Thumm Type: SNT 20 Device type: DC power supply / direct current power supply Power: 30 kW Mains input: 3AC 400 V / PE, 50/60 Hz Output voltage: 1DC 0–30 V Output current: 1DC 0–500 A Regulation: Constant current / constant voltage Setpoint input: 0–10 V = 0–100 % for current and voltage Cooling: controlled fan Bdodozap T Sopfx Apvjf Device protection: short-circuit proof, overload protection, thermal protection, mains monitoring Duty cycle: ED 70 % Year of manufacture: 05/2014 Weight: approx. 100 kg Device No.: 21401682 / 9-24 Condition The unit comes from a decommissioned industrial system. It is sold in its removed condition. We have not performed a functional test. See pictures for the visual condition. Inspection possible by appointment. Scope of supply The DC power supply / module shown in the pictures is for sale. Other identical or similar modules may be available upon request. Price A package price is possible when purchasing multiple units. Notes Sale exclusively to commercial customers. Subject to prior sale and errors. Sale is made without warranty, guarantee, or right of return.

Condition: excellent (used), Year of construction: 2007, operating hours: 36,514 h, functionality: fully functional, type of input current: AC, power: 300 kW (407.89 HP), fuel: domestic gas H, type of cooling: water, Equipment: documentation/manual, CHP plant, combined heat and power plant AVESCO CAT TBG-926-24SY with heat pump After the new gas heating system is commissioned in our heating plant in September 2025, the CHP plant will be available. The plant has been regularly and professionally maintained. With 36,514 operating hours, it is in very good condition. The plant can supply 70 apartments with heat and electricity. In March 2026, an emissions test was carried out; see the measurement report. If desired, an on-site inspection can be arranged. The dismantling and transport must be taken over by the buyer. The cost estimate prepared by us amounts to approximately 40,000 euros. The location is in CH-8620 Wetzikon ZH. Bdodpjzq S Tnefx Apvof

Condition: used, Year of construction: 2026, operating hours: 5 h, load capacity: 2,500 kg, fuel type: diesel, Equipment: head guard, JQ Power CPCD25 diesel forklift, manufactured in 2026! As new condition! ----* Manufacturer: JQ Power * Type: CPCD25-3S * Year of manufacture: 2026 * Operating hours: approx. 5 * Load capacity: 2,500 KG * Weight: 3,850 KG * Diesel engine * Side shift * Top condition / As new * Video available upon request (WhatsApp Erik) * Price: 9,500 Euros, net + 19% VAT ----For further questions, please call: Erik Kortum: WhatsApp Bdjdjzq Npaopfx Apvjf ?All information is subject to change without notice and does not constitute a guarantee. Errors and prior sale are reserved.?

Condition: new, NWK165 Diesel Generator Silent type Prime Power: 120 kW / 150 kVA Engine: Fawde & CA6DF2-19D, 4 cylinders, water-cool Connection: Sockets & 4P RCD circuit breaker Tank Capacity: Frequency: 50 Hz Voltage: 400/230 V Governing Type: Electronic Controller: Comap Intelilite4 AMF8 Bdedpfxsnkau No Apvsf incl. AVR, battery charger , water heater

Condition: new, NWK165 Diesel Generator Silent type Prime Power: 120 kW / 150 kVA Engine: Fawde & CA6DF2-19D, 4 cylinders, water-cool Connection: Sockets & 4P RCD circuit breaker Tank Capacity: Frequency: 50 Hz Voltage: 400/230 V Bdjdsnkb Ukopfx Apvof Governing Type: Electronic Controller: Comap Intelilite4 AMF8 incl. AVR, battery charger , water heater

Condition: new, Year of construction: 2022, NWC110 Cummins Engine Newpower Generator The unit is new, complete with controls, diesel tank, exhaust and batteries. Technical specifications Bdedpfxoh U Nxfe Apvef Engine : Cummins 6BTA 5.9-G2, 6cylinder, water cooled Generator: Newpower NW/N 110 Continuous power: 80 kW / 100 kVA Maximum power: 88 kW / 110 kVA Connection:4P circuit breaker, (optional sockets, optional automatic transfer switch..) Frequency : 50Hz Voltage: 400/230V RPM : 1500 rpm. Diesel tank: 8-10 operating hours Dimensions (LxWxH): 3000x 1000x1745mm Weight: 1600 kg Network monitoring, soundproof additional costs; Automatic transfer switch: € 980 Shipment: - Worldwide transport including unloading is possible for an extra charge - In order to be able to give an exact freight price, please send me an inquiry with your data and your