Used Salt Spreader for sale (682)

Condition: used, Year of construction: 2011, 5 boom sections, 15m , induction bowl / HC 5500 Computer + Spray II flow control / rinse water tank single nozzle holder / / Fodpfx Afot Dx Uropopi

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Universal Feeder HB 350 The Universal Feeder HB 350 is capable of handling even very heavy products with a height ranging from 2 to 80 mm. Thanks to its independent control and drive unit, it operates completely autonomously. It enables fully automatic feeding of both main products and inserts. For example, magazines or catalogs with a length of 148 – 420 mm, a width of 105 – 315 mm, and a height of 2 – 60 mm can be easily inserted. Fedpfx Afeyk Emvopjpi The performance of this universal feeder reaches up to 18,000 cycles per hour. Thanks to its motorized height adjustment, it can be used flexibly.

Year of construction: 2003, condition: used, functionality: fully functional, machine/vehicle number: 59 226 035 580 030, Type: SC/KWT 450 Salt Spray Chamber Technical Data: - Test chamber volume: 450 liters - System weight: 140 kg (test chamber + machine unit; without brine and without test specimens) - Brine reservoir: 180 liters - Maximum load: 100 kg, 8 kg per support rod - External dimensions: Height without hood 920 mm, height with hood 1370 mm, width 1930 mm, depth 800 mm - Test chamber dimensions: Height 740 mm, width 850 mm, depth 570 mm - Control unit: Simcon/32 Fedpjx Ig Tmjfx Afpjpi - Condition: used - Operating hours: 22,914 h Connection Data: - Voltage: 1/N/PE AC 230V ±10% 50Hz - Rated power: 2.0 kW - Rated current: 8.5 A - Power consumption: 450 Wh/h - Brine consumption: approx. 0.5–1 liter per hour - Compressed air consumption: approx. 1.5 m3/h at 0°C and 1 bar - Deionized water consumption: approx. 0.4 liters per hour Application Areas: - Salt spray test in accordance with DIN 50021 - Condensation water test in accordance with DIN 50017 - Standard climate (ventilation): DIN 50014 The system has been serviced and calibrated annually by the manufacturer, with no outstanding repairs (full maintenance contract). Last maintenance/calibration/DGUV3 inspection: 03/2025. The system will remain connected until week 3 and can be inspected during this time. All installation and operating manuals as well as the service manual are available.

Condition: used, Year of construction: 2015, operating hours: 9,319 h, lifting height: 4,900 mm, fuel type: electric, mast type: triplex, battery manufacturer: Emrol, battery capacity: 750 Ah, battery voltage: 48 V, fork length: 1,600 mm, color: other, Weights Empty weight: 3.600 kg Functional Lifting capacity: 2.000 kg Maximum passing height: 212 cm Number of valves: 3 Condition General condition: average Technical condition: average Fedpfx Aov D Ernofpopi Visual appearance: average Other information EPA Marked: yes Fork carriage: Fork spreading Additional information Please contact Bas Sindorf for more information

Year of construction: 2012, condition: used, Attachment suited for: Loading and unloading machines Fsdpfeydmzuox Afpjpi Please contact Sales Team for more information

Year of construction: 2012, condition: used, Attachment suited for: Loading and unloading machines Please contact Sales Team for more information Fedpfx Aoydmzzofpopi

Year of construction: 2024, condition: used, New: Yes Please contact us for more information. Fpedpfxevx H Duo Afpoi

Year of construction: 2024, condition: used, New: Yes Carrying capacity: 5.000 kg Dimensions of cargo space: 375 x 175 x 50 cm Cargo space capacity: 3.280 l Tyre size on axle 1: 10/75-15.3 Tyre size on axle rear: 10/75-15.3 Fpjdpfx Afewf S Epjpei

Condition: used, Fertilizer applicator    • Working width: 5,300 mm    • Directly from operation. Fpodpeyhxarsfx Afpji Condition: Used

Year of construction: 2024, condition: used, New: Yes Fedpjwdpulsfx Afpopi Cargo space capacity: 5.000 l

Year of construction: 2025, condition: used, New: Yes Colour: Grey Cargo space capacity: 10.000 l Fpjdpfx Aewvmkzjfpji

Condition: used, BSA slurry tank   • 5000 l capacity   • Forced steering   • Equipped with screw pump   • Lighting Fpedpfjyg Ea Iox Afpei   • Wide tires   • Ready for immediate use! Condition: Used

Condition: used, New: Yes Colour: Grey Fpsdpfxeyaqp Ue Afpoi

Condition: used, Jako tank Fpsdpfx Afjyatxxspsi    • Capacity 8000 litres    • Equipped with vacuum pump Condition: Used

Year of construction: 2023, condition: used, New: Yes Colour: Red Carrying capacity: 8.000 kg Dimensions (LxW): 450 x 200 cm Fpjdpfx Ajx S N Smefpei

Condition: used, New: Yes Working width: 750 cm Fpjdpjx Tgb Iefx Afpsi

Year of construction: 2021, condition: used, New: Yes Fpodpsx Tc Ikofx Afpei Reference number: 5

Condition: like new (used), functionality: fully functional, Year of construction: 2015, operating hours: 1,000 h, Snow equipment in perfect condition, consisting of a salt spreader and blade. Schmidt Stratos 2 8m3 salt spreader, fully equipped. Hydraulic system, Schmidt MS Tarron 3.6m blade with electro-hydraulic system. Fsdpfxex Aqpxj Afpspi

Condition: used, machine/vehicle number: 170009, turning diameter over bed:400 mm turning diameter over slide rest:250 mm turning length:1000 mm max swing over gap:520 mm Height of centres:200 mm crossed path:230 mm bed width:218 mm main spindle bore:52 mm spindle size:MK 6 Fpododmrcrjpfx Afpsi speeds::55-2000 U/min turning angle of tool post:90 grad tail stock:50 mm taper in tailstock:MK 4 threading metric:0,4-7 mm threading WHITWORTH:4-60 TPI total power requirement:2,2 kW dimensions of the machine ca.:1940 x 820 x 1545 mm weight of the machine ca.:750 kg tailstock quill:110 mm tapping modul:0,4-3 mm tapping diametral:8-84 Gang/Zoll

Condition: ready for operation (used), The WS 1250 CNC gear shaping machine features a configuration comparable to the Lorenz LS 1000 or LS 1250 models, is designed as a universal machine, and is employed by manufacturers of gears and transmission technologies for the process of gear shaping. Technical Data Diameter: 1250 mm Fpjdpjyw Hxnefx Afpei Module: 12 mm Face width: 210 mm Dimensions: 3,750 x 2,500 x 3,600 mm Machine weight: approx. 19,000 kg *All details and data are non-binding. Subject to prior sale. Special Features: The machine is equipped with a digital CNC control by Siemens type 840 D, as well as digital servo motors and drive amplifiers. The control cabinet is air-conditioned. Sinumerik 840 D: PCU 50, 566 MHz, 256 MB RAM, NCU 572.4, 3-axis/spindle, NC memory 2.5 MB, PLC memory 96 KB, 19” flat operating panel OP 10 C, 10.4” flat screen, electronic handwheel for linear axes, diagnostic system for error messages, warnings, and informational texts.

Condition: excellent (used), Year of construction: 2016, 1 used rapid steam generator ----- Manufacturer: CERTUSS Type: Universal TC Capacity: 700 kg/h Maximum heat output: 459 kW Operating pressure: 10 bar Water capacity: 103.5 l Test pressure: 57 bar CE mark: CE 0035 Year of manufacture: 2016 Equipped with a Certuss gas burner, gas control system, control cabinet with touch control, mounted on the boiler body, and the existing coarse and fine fittings Fedpfewhxh Asx Afpjpi

Year of construction: 1999, operating hours: 76,000 h, condition: used, functionality: fully functional, machine/vehicle number: 510445, Gas turbine (GT) generator Technical parameters: • Manufacturer: Jeumont Industrie • Type: JISALT 460 (1999) Fpsdsy D Hp Tepfx Afpoi • Serial number: 510445 • Apparent power: 60 MVA • Voltage: 11.5 kV • Stator current: 3012 A • Frequency: 50 Hz • Rated speed: 1500 rpm • Power factor: 0.8 • Excitation voltage: 259 V • Excitation current: 617 A • Excitation with rotating diodes (brushless) • Air cooled • Insulated bearing shells on both (TE, EE) sides • Operating hours: 76,000 hours Last diagnostic inspections of stator and rotor performed in 2023. Values and condition were good, but factory inspection recommended. Without control and protection system!

Year of construction: 1999, operating hours: 76,000 h, condition: used, functionality: fully functional, machine/vehicle number: 510444, Technical parameters: • Manufacturer: Jeumont Industrie • Type: JISALT 420 • Serial number: 510444 • Apparent power: 14 MVA • Voltage: 15 kV • Stator current: 539 A • Frequency: 50 Hz • Rated speed: 1500 rpm • Power factor: 0.8 • Excitation voltage: 98 V • Excitation current: 454 A • Excitation with rotating diodes (brushless) • Water cooled • Insulated bearing shells on both (TE, EE) sides • Operating hours: 76,000 hours Last diagnostic inspections of the stator and rotor performed in 2023. Values and conditions were good, but factory inspection recommended. Without control and protection system! Fjdpfx Afoy D Hrzopepi

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 10,500 mm, loading space width: 2,480 mm, loading space height: 2,165 mm, loading space volume: 56 m³, Equipment: ABS, Lightweight chassis version Made of aluminum (15-6-12) Two fully automatically welded I-section longitudinal beams with welded cross members. Chassis width: 1,600 mm Axles and suspension: Disc brake 430 mm Jost (formerly Mercedes DCA) axle units, 3 x 9 tons, with air suspension, air springs arranged centrally to the chassis longitudinal beam. First axle can be lifted with starting assist and manual forced lowering. Smart Board information center, lift/lower valve, BVA brake wear indicator. Tires and wheels: Fjdpfefi Nmuox Afpepi 6 wheels with tires size 385/65 R22.5, from various manufacturers (manufacturer's choice), with steel rims 11.75 x 22.5 ET 120. Fifth wheel: Mechanical version with single-sided operation in 2 speeds with pivoting base for air suspension. Braking system: According to E.G. standards, dual-circuit Wabco system, spring-loaded parking brake acting on two axles and Wabco EBS incl. RSS (Roll Stability System) and Premium modulator, Wabco Smartboard information center, aluminum air tank system. Electrical system: According to STVZO guidelines, with 2 five-chamber lights, type Aspöck Ecopoint 2, 24-volt system with 2x7 and 1x5-pole sockets, with side marker lights, 2 separate LED rear lights, 1 LED interior light. Tipping body/dump bed: Internally fully welded. Aluminum dump bed, side walls with 30 mm thick plank profiles (2-3 mm) welded together, 600 mm wide. Floor made of 8 mm thick, highly wear-resistant alloy (5383H34/HB 110). Front wall reinforced, 4 mm thick, in a straight design. Rear wall as a universal door in a straight design with 2-wing doors in a 2/3-1/3 configuration, with a grain slide, or alternatively in a 1/2-1/2 configuration with a grain slide on each side. Aluminum round profile welded on the side and bottom for sealing the door gap on the rear doors. Rear doors partially covered with smooth aluminum. Operation of the universal door automatically pneumatic with separate lever that can be locked. Rear supports made of aluminum, can be swung out. Two retaining straps with rubber buffers on the tipping body, attached to the frame at the front wall. Hydraulic system: Tipping cylinder with large cylinder body Hydraulic cylinder mounted on the front wall with a max. working pressure of 150 bar, manufacturer Edbro, with approx. 2.5 m hydraulic hose and quick-release coupling 1", tipping angle approx. 48 degrees. Accessories: 6 Parlok fenders, complete mud flaps covering the entire vehicle width attached to the U-profile. Aluminum spare wheel holder. Folding side impact protection on the right side. Large tool box, type 860. Approx. 3 m aluminum ladder. 3 aluminum swing supports mounted centrally, approx. 150 mm higher. Additional centrally mounted support receiver for positioning a total of 2 supports to increase the loading width. Tarpaulin with a central light strip and separate reinforcements in the wear areas, approx. 660 gr./m2 quality, with tarpaulin system. Circumferential rubber rope in the rear end of the tarpaulin to be attached to two tension hooks on the rear swing support. Walkway on the frame in chassis color. Tarpaulin closure with quick-release fastener. Tarpaulin end at the rear with welded-in rubber rope to prevent water ingress. Robust folding underrun protection with two towing eyes left and right incl. locking pin. 2 "Clear-Pass" mud flaps on the fender according to EG standard, attached to the frame on the side. Aluminum grain chute with tarpaulin bag attached to the frame on the side. Holder for s

Year of construction: 2013, condition: excellent (used), Technical design: Console table 3050 x 1200 mm with 6 consoles that can be manually moved, each console with 2 vacuum suction cups and one pneumatic excavation rail. Dot laser positioning aid, vacuum pump. Fpjdpokqyizjfx Afpji Control system: CNC XILOG Plus. Main spindle: 8.5 kW (12 HP) HSK 63F with C-axis, 1500 – 24,000 rpm. Tool changer: rotary tool magazine, 12 positions. 1 adapter unit with pivoting saw. Drilling head with: 12 vertical spindles, 4 + 2 horizontal spindles, nut saw. Bumper safety system. The tools, HSK tool holders, drills, etc., shown in the images are not included in the scope of delivery!