Used Sandvik Coromant Tool Holder (28239) for sale (40,000)

Condition: used, Year of construction: 2000, functionality: fully functional, Hydraulic riveting machine for installing self-tapping rivets, Sovereign SO14960 Length of rivets that can be installed: 10-18 mm Prsdpfx Aez Hv Sqsirjc Automatic feed system with a vibrating feeder Pressing force: approximately 1500 kg Cycle time for installing a single rivet: 2.5 seconds

Condition: used, Univ. Universal milling machine TOS, type FN 32 Year of manufacture: approx. 1980 Travel distances: X: 450 mm, Y: 240 mm, Z: 380 mm Table size: 700 x 300 mm Spindle mount: SK 40 - M16 Spindle speed: 63-2000 rpm, 18 steps Feed rate: 8-400 mm/min, 18 steps Rapid traverse rate: approx. 1400 mm/min Tailstock travel: 90 mm Main spindle motor power: 2.2 kW Connection power: 400 Volt, 50 Hz - 2-axis digital display Heidenhain, type 731B for the X and Y axes - Vertical milling head with boring quill, swiveling +/- 90° and horizontally extendable - Spindle speed via 18 gear stages - Coolant system in the machine base - Electrical control cabinet on the side of the machine Prjdpfx Aoz Ebu Uoiroc - Fixed angle table - Support for horizontal milling - Keyway broaching attachment, 16 to 105 strokes, stroke up to 70 mm, swiveling +/- 90° - 1 piece tool holder SK 40 with slitting cutter - Control cabinet located beside the machine Space requirement L x W x H: 1500 x 1200 x 1970 mm Weight: 1650 kg Good condition

Condition: good (used), Year of construction: 1988, total width: 100 mm, total length: 100 mm, total height: 200 mm, overall weight: 13 kg, Eckold tool ECKOLD - FWR 1003/4X MACH-ID 9698 Make: ECKOLD Pedpfoz D Aw Ijx Airsrc Type: FWR 1003/4X YOP: 1988 Length:100mm Width:100mm Height:200mm Weight:13kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, Available from Q1/2027, or upon agreement. Equipment can be further adjusted to meet specific needs. Universal 5-axis retrofitting grinding machine, directly from the manufacturer. Also available with the latest Horizon grinding software, tailored to the requirements of the tools and components. For re-sharpening hammer jaws, helical milling cutters, bevel gear cutters, cutting rotors, form cutters, industrial knives, circular knives, hobbing wheels, skiving tools, and other workpieces and components. Work area: X-axis 700 mm Y-axis 410 mm Z-axis 500 mm C-axis rotation angle 320° X3 auxiliary axis: Optional Work area 600 mm Grinding spindle: Interface HSK 80 E Power 100% 28.8 kW Speed Standard 12,000 rpm Measuring system and feed: Resolution linear axes 0.0001 mm Rapid traverse linear axes 30,000 mm/min Resolution rotary axes 0.001° Speed C-axis 150 rpm Rotary axis: (A-axis SK50) Center height Standard 175 mm Speed as a spindle 1,000 rpm Optional 2,600 rpm Control system: Siemens 840 DSL Tool changer: Double wheel Coolant system: Available upon request Extraction system: LTA Extinguishing system: Kraft & Bauer Dressing unit Predpfjz Dilfox Airsc Additional accessories/clamping devices from the extensive A. Haas clamping device catalog are possible. Individual, customer-specific training. Includes pre-acceptance at the manufacturer's plant, IBN (Initial Batch Numbering), training, and final acceptance at the customer's site. Financing also available upon request.

Condition: excellent (used), Year of construction: 2014, operating hours: 12,340 h, functionality: fully functional, spindle speed (max.): 10,000 rpm, type of input current: three-phase, grinding wheel diameter: 250 mm, overall weight: 8,100 kg, feed rate X-axis: 20 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 20 m/min, travel distance X-axis: 380 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 280 mm, grinding spindle motor power: 14,000 W, table length: 500 mm, table width: 330 mm, input voltage: 400 V, CNC Tool grinding machine SCHNEEBERGER Gemini DMR TECHNICAL CHARACTERISTICS: Year of manufacturing: 2014 CNC control: FANUC 31i B5 Software installed: Quinto Qg1 Colour touchscreen: Yes Number of axes: 5 Stroke X axis: 380 [mm] Max. Stroke speed X axis: 20000 [mm/min] Resolution X axis: 0.0001 [mm] Stroke Y axis: 300 [mm] Max. Stroke speed Y axis: 5000 [mm/min] Resolution Y axis: 0.0001 [mm] Stroke Z axis: 280 [mm] Max. Stroke speed Z axis: 20000 [mm/min] Resolution Z axis: 0.0001 [mm] Table length: 500 [mm] Table width: 330 [mm] Grinding spindle attachment: HSK-50 Max. grinding wheel speed: 10000 [rpm] Grinding spindle motor power: 14 [kW] Max. diameter grinding wheel: 250 [mm] Internal workpiece spindle nose: ISO 50 Number of running hours: 12340 [h] Supply voltage: 400 [V] Rated current: 63 [A] Weight: 8100 [Kg] EQUIPMENT INCLUDED: x1 8-position grinding wheel changer x8 coolant supports x1 tool probe x1 FANUC LR Mate 200iC 5L 6-axis tool-loading robot x1 set of robot grippers x1 pallet for robotic tool loading/unloading x3 HEIDENHAIN linear scales on the X, Y and Z axes x1 electrical cabinet air-conditioning unit x1 spindle chiller x1 fire suppression system (to be inspected by the buyer through a qualified organization) x1 set of 4 lifting brackets x1 set of technical manuals x1 parameter backup on USB flash drive Pjdpfjz Hcg Isx Airjrc *The SCHUNK collet holder and the 2 grinding wheel holders shown in the photos are not included Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine for sharpening/grinding tools such as milling cutters, taps and drills. Machines similar to the following brands: Blohm, ELB, Ewag, Favretto, Fenix, GER, Jones & Shipman, Jung, Karstens, NUMAFFUT, Okamoto, Okuma, Saacke, SMP, Studer, Vollmer and Walter. Also consider cylindrical and surface grinding machines, lathes, machining centres and milling machines.

Condition: good (used), Sheetmetalworking tooling Multi V Lower tooling 140 x 140 x 6000 mm Prsdpfxjzc Izgo Airjc Total length:6000mm Total hight:140 x 140mm V-size: 8 - 10 - 16 - 20 - 24 - 30 - 40mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Die holder, separating tool, punching tool, punch, punch die, punch stamp, gill forming tool, die holder -Stamping tool: die holder -Hole: Ø 45 mm -Bore: Ø 33 mm Pedpfxezniqxs Airorc -Hole spacing: 180 x Ø20 mm -Dimensions: 240/85/H120 mm -Weight: 7.3 kg

Condition: good (used), Separating tool, punching tool, punch, punch die, punch stamp, -Punch tool: Intermediate block -Bore: Diameter 65 mm Prjdpfxoznklqo Airjc -Dimensions: see photos -Dimensions: 370/250/H125 mm -Weight: 46.7 kg

Condition: good (used), Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punching die, corner notching punch, punching punch, square notching punch, notching punch, notching tool Pjdpoznk Aiofx Airsrc -Punching tool: Square notching die for profile steel shears and flat steel shears -Width: 50 mm -Dimensions: see photos -Dimensions: 175/60/H125 mm -Weight: 6.6 kg

Condition: good (used), Die holder, notching tool, punching tool, punch, punch die, punch stamp, punch die, slot die, punch and die set slot die -Die cutting set: punch and die set, slotted die -Size: 20.0x40.0 mm -Matrix: 20.7x40.7 mm -Transport dimensions: Ø 90 x 80 mm -Weight: 2.1 kg Prjdpfxezr Ewvo Airoc

Condition: good (used), Die holder, notching tool, punching tool, punch, punch die, punch stamp, punch die, slot die, punch and die set slot die -Die cutting set: punch and die set, slotted die -Size: 18.0x40.0 mm Pedpszr Exgefx Airorc -Matrix: 18.7x40.7 mm -Transport dimensions: Ø 90 x 80 mm -Weight: 2.1 kg

Condition: good (used), Separating tool, punching tool, punch, punch die, punch stamp, die holder -Punch tool: Notching tool -Type: Size 1 1/4" -Dimensions: see photos Prodpfx Aozr Hb Aeirsc -Dimensions: 270/180/H235 mm -Weight: 25.4 kg

Condition: used, System 68, 78, 80, 92 IV Number of tools 4 St. Bore 50 mm Used Leitz window tools, Zuani IV 68, 78, 80, 92 Sale on behalf of our customer ----- Window cross-sections attached as a PDF! Due to modifications, some tools are older than those shown in the attached window cross-sections/drawings. Tools are sold in their current condition, in the quantities shown and with accessories as available. Note regarding window cross-sections, tool drawings and tool system listings: Engelfried accepts no liability for the actual tools being consistent with the systems mentioned and shown in the drawings. Podszughnopfx Airjrc ----- (Technical specifications as per the customer – subject to change!) All prices quoted are net, plus statutory VAT.

Condition: new, range L-W-H 960 x 460 x 860 mm weight 75 kg 8 St. Tool trolley filled Contents and equipment see pictures Podpfx Aiszdk E Nererc

Condition: good (used), Year of construction: 2003, functionality: fully functional, Tolerance: -10% to +6% Pneumatics: 4 - 6 bar Prsdpfxszl Thco Airoc Power consumption: < 1000 VA

Condition: used, Year of construction: 2018, Used angle unit for Holz-Her CNC machining centers Year of manufacture: 2018 Predpfx Aiszk Nlusroc Features and technical specifications: - HSK 63 F tool holder - With torque support - With 2 horizontal tool spindles - Suitable for mounting a CLAMEX grooving tool as well as a saw blade Technical Specifications: - Max. drive speed: 8,000 rpm - Max. output speed: 12,000 rpm - Permissible operating temperature: 85° - Unit can be swiveled 360° around the drive axis - Sound level: 80 dB(A) Weight: 3,257 kg Availability: Immediate Location: Röllbach

Condition: like new (used), Year of construction: 2019, functionality: fully functional, Zoller Titan tool measuring machine: - Year of manufacture: 2019 - Software: titan/pilot 3.0 - Max. tool length (Z-axis) = 550 mm - Max. tool diameter = 260 mm - Tool holder: SK40, KSK63, etc., as required Prsdjzd Acaepfx Airsc

Condition: used, diameter / mm Prjdpfx Aijzcgf Rjrsc weight / kg Type / 0

Condition: used, 1x bending knife from a VOEST press brake Psdpfx Aezcgh Eeirsrc Length: 4050 mm Weight: approx. 115 kg For further dimensions see pictures

Condition: ready for operation (used), Year of construction: 1984, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, rotational speed (max.): 2,500 rpm, rotational speed (min.): 50 rpm, input voltage: 400 V, Deckel FP4M Universal Milling Machine in excellent technical and optical condition. Machine no. 2203-1389 Pjdpfeytb Uhox Airorc Year of construction: 1984. Technical specifications: - Working travel X/Y/Z: 500/400/400 mm - Spindle speed range: 50 - 2500 RPM - Power: 3.7 / 4.4 KW - Spindle brake - Automatic feed: X-Y-Z, continuously adjustable, 6.3 / 630 mm/min - Rapid traverse X-Y-Z: 1300 mm/min - Fixed angle table - Vertical quill with 90 mm stroke - Tool holder: ISO 40/M16 - Weight approx. 1500 kg Machine options: - 3-axis digital readout Heidenhain - Coolant system - Chip tray - Central lubrication - Automatic pulse lubrication on the milling head - Machine manuals with spare parts list and electrical diagrams - Cabinet with accessories, see photos

Condition: used, Year of construction: 1983, x-travel 1000 mm y-travel 450 mm z-travel 450 mm table surface area 1370 x 400 mm number of T-slots 5 Stck. spindle turning speed range 32 - 1500 U/min tool taper SK 50 total power requirement 7,0 kW weight of the machine ca. 3,1 t dimensions 2,1 x 1,7 x 1,9 m Milling machine with Prodey Ehxlepfx Airoc - Heidenhain TNC 135 - Rapid traverse - Milling head with hydraulic tool cutting - Coolant system - Central lubrication

Condition: used, Rotating chuck collet holder for pressure collets Collet chuck, collet holder Chuck flange: short taper DIN 55027 size 5 (with 4 tightening bolts M10), taper bore approx. Ø 82 mm Pedpfx Aijzqgl Esrjrc Pressure collet type: F 48 / 173E DIN 6343 Large taper diameter: Ø 60 mm Small taper diameter: Ø 48 mm Collet taper: 30° Collet length: 94 mm - 2 pressure collets: 1x Ø 20 mm round collet, 1x 30 mm hexagonal collet Weight: 11.5 kg Good condition

Condition: refurbished (used), Hello, We are offering rebuilt ER-093996 square 15 holders C from Erowa. The holders were converted from the old version ER-007986 without gripper grooves and sealing plate. We completely disassembled, blasted, cleaned, and readjusted them. Pedpjwa I Hrsfx Airorc You are also welcome to send us your holders for rebuilding or overhaul. We are happy to answer any questions or provide technical assistance.

Condition: used, Year of construction: 2006, x-travel 600 mm y-travel 270 mm z-travel 430 mm 630 mm table-size 1120 x 270 mm spindle turning speed range 45 - 1660 U/min spindle taper SK 40 control konventionell spindle motor 2,2 kW total power requirement 2,4 KVA weight of the machine ca. 1,35 t dimensions 1,8 x 1,4 x 1,8 m Prjdpfjv Sdz Rjx Airoc Machine equipped with: - Digital display - Machine light - Coolant system - Machine feet

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, feed length X-axis: 485 mm, feed length Y-axis: 385 mm, feed length Z-axis: 380 mm, spindle speed (max.): 3,150 rpm, Table size 795 x 460 mm Longitudinal travel 485 mm Transverse travel 385 mm Vertical travel 380 mm Spindle travel 80 mm Spindle speed 0 - 3,150 rpm Spindle taper horizontal ISO 40 Spindle taper vertical ISO 40 Prjdpfewffzkex Airsc Control CONTOUR 2